My Micromax A116 Canvas HD hardbricked... - Micromax A116

Hey guys.. so I have my canvas HD for like 2 years now and I absolutely love my mobile more than anything.. I rooted it a week after buying it and might have installed custom roms a thousand times.. never faced any problems whatsoever... two weeks ago, while I was normally using my mobile, everything started to force close, so to get rid of that, I restarted my phone... guess what, it never turned on again.. it was stuck on the boot logo.. I tried going into recovery and flast rom again but all I saw was this can't mount error and can't find recovery log when I try to wipe data or format it.. had no luck whatsoever with sp flash tools too... then I decided to give it in a service center, the guys returnedy mobile 2 days after and it was completely dead.. it didn't even turn on... they just told me that its not accepting any software and I took it and left.. if someone can please help me with this, I would be happy.. I came across many problems but this one is ending up without any solution.. please help guys, I don't want to lose my canvas HD.. I love it too much..

which rom you have installed
kleankutrockstar said:
Hey guys.. so I have my canvas HD for like 2 years now and I absolutely love my mobile more than anything.. I rooted it a week after buying it and might have installed custom roms a thousand times.. never faced any problems whatsoever... two weeks ago, while I was normally using my mobile, everything started to force close, so to get rid of that, I restarted my phone... guess what, it never turned on again.. it was stuck on the boot logo.. I tried going into recovery and flast rom again but all I saw was this can't mount error and can't find recovery log when I try to wipe data or format it.. had no luck whatsoever with sp flash tools too... then I decided to give it in a service center, the guys returnedy mobile 2 days after and it was completely dead.. it didn't even turn on... they just told me that its not accepting any software and I took it and left.. if someone can please help me with this, I would be happy.. I came across many problems but this one is ending up without any solution.. please help guys, I don't want to lose my canvas HD.. I love it too much..
Click to expand...
Click to collapse
bro which rom you have installed before brick......

Facing the same problem
shah.nawaz said:
bro which rom you have installed before brick......
Click to expand...
Click to collapse
I am too facing the same problem,however not yet given to service center. Stuck at the boot logo. Rooted and have been using Sam Flare v 6.3 ROM.

u must have tried to swap the partitions
it seem that u tried to swap the memories..... I too encountered the problem but after giving it to service centre they repaired it in 30min and i am having canvas hd clone qmobile A600 and here service is too good i feel sorry for u

shah.nawaz said:
bro which rom you have installed before brick......
Click to expand...
Click to collapse
been using canvas turbo stock rom for canvas hd when this happened bro.. ?

Related

[FIXED][TESTED] Xperia mini pro sk17i touch didnt work!

I was successful in restoring the touch screen.
Cause the loss of touch on my machine because i flashed wrong rom.I flashed this rom. I also do not understand why I did so. It is stupid, no.... really very idiot. The only thing what i still remember that is i install it when i want go to sleep
After two days of struggling with many tutorials on internet and flashed my phone so many times with many different rom. I was happy to finally restore the touch screen. It was a beautiful day.So I wrote this tutorial to share everybody like me and hope my toturial could help you.
When your sk17i has same problem like me. Calm down and follow absolute accuracy my guide.
Step 1: Use flashtool flash kernel CM10 (here) or rage-kernel (here). I was used CM10. ( If want flash custom kernel, u must unlock bootloader. This is toturial.)
Step 2: Flash rom Ultimate HD 2.0.2 but chose device is ACTIVE (dont choose your device). Finished, turn on your phone and wait 5 mins. And i gues your phone will stop at black screen. Dont worry about that, remove battety and go to next step.
Step 3: Flash again above rom (ultimate HD 2.0.2) but choose MINI PRO. Finished, do not turn on your phone.
Step 4: Flash .62 stock rom for sk17i (download here). And finished toturial, your touch screen will restore.
Click to expand...
Click to collapse
Click thanks if you success with my toturial.​
Good work!
A bit same as my method
Sent from my ST15i using Tapatalk 2
scorpion 13 said:
Good work!
A bit same as my method
Sent from my ST15i using Tapatalk 2
Click to expand...
Click to collapse
I through im lucky!
Really works man???
Cause,i have a same problem with my touchscreen brick after installing Wrong ROM,,
But, i'm using xperia mini st15,,
Maybe your method help me,,,
Sent from my ST15i using xda premium
echo juned said:
Really works man???
Cause,i have a same problem with my touchscreen brick after installing Wrong ROM,,
But, i'm using xperia mini st15,,
Maybe your method help me,,,
Sent from my ST15i using xda premium
Click to expand...
Click to collapse
Yes, i restored my touch screen by this way.
I dont sure my toturial will work with ST15i because i nerver test on st15i, i fixed success on sk17i.
You can try here. It maybe work because have many persons success.
Good luck.
Hi! I tried it on my SK17i. Just want to clarify, after flashing ROM for MINI PRO in step 3, what exactly do I do (You said don't turn on)? do I flash stock ROM while in the recovery screen? Or turn off phone by pulling the battery off before flashing stock ROM?
I can't make it work yet, but I am still trying. Nevertheless, thank you because this is so far the only method that gets my touch screen working after flashing custom ROM for Active but no good after completing the steps.:good:
human88 said:
Hi! I tried it on my SK17i. Just want to clarify, after flashing ROM for MINI PRO in step 3, what exactly do I do (You said don't turn on)? do I flash stock ROM while in the recovery screen? Or turn off phone by pulling the battery off before flashing stock ROM?
I can't make it work yet, but I am still trying. Nevertheless, thank you because this is so far the only method that gets my touch screen working after flashing custom ROM for Active but no good after completing the steps.:good:
Click to expand...
Click to collapse
Yes, u turn off the phone by pulling the battety and flash stock rom.
IF u success, lets me know!
do i have to root my phone before flashing kernel.does this kernel is pre rooted.
yuvi1508 said:
do i have to root my phone before flashing kernel.does this kernel is pre rooted.
Click to expand...
Click to collapse
You need an unlocked bootloader to flash the kernel and yes these kernels are prerooted
n_tienloi said:
I was successful in restoring the touch screen.
Cause the loss of touch on my machine because i flashed wrong rom.I flashed this rom. I also do not understand why I did so. It is stupid, no.... really very idiot. The only thing what i still remember that is i install it when i want go to sleep
After two days of struggling with many tutorials on internet and flashed my phone so many times with many different rom. I was happy to finally restore the touch screen. It was a beautiful day.So I wrote this tutorial to share everybody like me and hope my toturial could help you.
When your sk17i has same problem like me. Calm down and follow absolute accuracy my guide.
Click thanks if you success with my toturial.​
Click to expand...
Click to collapse
sorry mam but your tut is not working ..my XMP touch screen still not working...there's another way??
n_tienloi said:
I was successful in restoring the touch screen.
Cause the loss of touch on my machine because i flashed wrong rom.I flashed this rom. I also do not understand why I did so. It is stupid, no.... really very idiot. The only thing what i still remember that is i install it when i want go to sleep
After two days of struggling with many tutorials on internet and flashed my phone so many times with many different rom. I was happy to finally restore the touch screen. It was a beautiful day.So I wrote this tutorial to share everybody like me and hope my toturial could help you.
When your sk17i has same problem like me. Calm down and follow absolute accuracy my guide.
Click thanks if you success with my toturial.​
Click to expand...
Click to collapse
there's no choices when i installing hd mod v2.0.2..it's continuing installing how can i choose activer or mini pro in cmw??sorry for my bad english..
plz need tutorial with image step by step.....
make it more easy
i m new in flashing.......
Unfortunately this didn't work on my sk17
still not working.. help me
notification touch area not responding
my xperia mini pro touch also had touch problem.... the touch works, but only d notification area touch doesnt work... i tried dis tutorial n it startd working, but it stops responding after sum time and starts suddenly... dont knw wat the problem is... i installed wrong rom purposely to break d whole touch, but whichever rom i use, but there was d same result.. plz help me guys
Fixed for xperia mini
austinsilvester said:
my xperia mini pro touch also had touch problem.... the touch works, but only d notification area touch doesnt work... i tried dis tutorial n it startd working, but it stops responding after sum time and starts suddenly... dont knw wat the problem is... i installed wrong rom purposely to break d whole touch, but whichever rom i use, but there was d same result.. plz help me guys
Click to expand...
Click to collapse
guys just go to this thread mine problem is solved by this method
http://forum.xda-developers.com/showthread.php?p=38447085#post38447085
worked
1. Download CM10 kernel or rage kernel ( I used rage 3.2)
2. Flash the kernel
3. Flash Ultimate HD 2.0.2 rom and choose the one for active <- and my phone booted with touchscreen working :victory::victory::victory::victory::victory:
SOrry for all! I dont know why others dont work. Maybe i just lucky. But it's real.
Sk17i touch screen fixed
i have fixed it. but second step when i install with mini pro touch screen again gone. so i installed it third time by active ST17i and it fixed, keypad not working fixed by ,apk file and all working perfectly. now i want to know is there any problem by using active rom on mini pro
Can I use any other stock rom(ex: 4.1.B.0.587,4.1.B.0.431)????

[help]Xpm boot loop

Hey guys,I have sk17i (ics stock Rom, locked bootloader) I'm facing bootloop problem when I try on my Bluetooth. Whenever this happens I try to restore my backup file through cwm.it will work few days without any problem bluetooth also works fine but after few days what happens dont know when i open bluetooth it will go into boot loop. I have been repeating this cycle over a month finally I thought to take anybody's help and solve this problem. Can anybody help me in solving this problem pls guys help me it's disgusting me.......
Sent from my SK17i
mdsohail98 said:
Hey guys,I have sk17i (ics stock Rom, locked bootloader) I'm facing bootloop problem when I try on my Bluetooth. Whenever this happens I try to restore my backup file through cwm.it will work few days without any problem bluetooth also works fine but after few days what happens dont know when i open bluetooth it will go into boot loop. I have been repeating this cycle over a month finally I thought to take anybody's help and solve this problem. Can anybody help me in solving this problem pls guys help me it's disgusting me.......
Sent from my SK17i
Click to expand...
Click to collapse
Well it is a problem with some of the phones, especially xmps...my friend had this and he didn't wanted to root or unlock bl...but finally after trying tons of methods when we couldn't solve it I unlocked bootloader, flashed custom kernel, reflashed the rom and everything is fine till date
Best Regards,
AJ

My touch screen wont work after rooting???

I flashed my s3 more than 20 times so far and everything was ok since last night when it turns on normaly but when he came to choose country and language I noticed that my touch screen dont work, than I flashed official samsung rom via odin of course and flashing was ok but touchscreen still the same! I flashed several time with official rom but same thing every time! Pleese help I dont have contract so can any1 tell me is this software problem or hadware! If you know how to fix it I would be very thankfull....
so you used a root package for the note 2? you've fried the digitizer
Glebun said:
so you used a root package for the note 2? you've fried the digitizer
Click to expand...
Click to collapse
I used always the same routine like previous times, so no other option besides changing whole screen?
what file did you flash?
Glebun said:
what file did you flash?
Click to expand...
Click to collapse
For about 5 months i´ve got omega jelly bean v40, than i want to check new 4.2.2 and didnt love it so i want to bring back omega and there i got this problem than i flashed stock several times with same results!
but you said it happened after rooting, and now you're saying it happened after flashing omega
No one can help unless you give accurate information. Start from the top. List every step you took and every file you used to get from a working state to the broken state you're in now
Tell us what rom you were on when working and if rooted. Whole thread is confusing
Sent from my GT-I9300 using Tapatalk 2
rootSU said:
No one can help unless you give accurate information. Start from the top. List every step you took and every file you used to get from a working state to the broken state you're in now
Tell us what rom you were on when working and if rooted. Whole thread is confusing
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
My mistake, so:
1. My phone was rooted long time ago
2. I use omega jelly bean v40 from begining, i tryed others but always returned on omega with no problem
3 . this time I started with flashing JB 4.2.2 official from sammobile, and i done it normaly
4. i wanted still to return on omega like many times so far, and i just flashed omega, and on screen startup when there is chosing language and country i noticed my touch screen dont work
5. than i tryed to flash stock ics and everything was ok but same problem touch screen wont work
6. I tryed several time with same results
7. man who fix phones told me that i need to replace touch and screen, it will make burn hole in my pocket :crying:
Did the touchscreen work in the leak?
Sent from my GT-I9300 using Tapatalk 2
rootSU said:
Did the touchscreen work in the leak?
Sent from my GT-I9300 using Tapatalk 2[/
I dont understand what do you mean, it work normally before flashing and after it not responds, volume, off/on, home, back and options buttons works just touchscreen dont!
Click to expand...
Click to collapse
JB 4.2.2 from Samsung is a leak firmware. He's asking if it worked then
Glebun said:
JB 4.2.2 from Samsung is a leak firmware. He's asking if it worked then
Click to expand...
Click to collapse
Yes it worked normally for 5 days!
Edit > nevermind.
Dunno what youve done then. Better send it for repair

(Q) Problems flashing ROMS

I have problems flashing Roms I dont know what could be the reason. Couple days ago my SD card died I bought a new one I tried to flash the new version of Tweaked I forgot to made a back up and for some reason my phone will get stuck on the "Galaxy note 2" screen or return to the TWRP menu I tried to flash at least 5 different roms and same results the only one It was able to boot was Clean rom 3.1. I updated TWRP to the latest version and still having the same issues if any one can tell me what to do I will appreciate it
Sent from my SCH-I605 using xda app-developers app
You do know first boots take a while right? You should wait up to or at least 10 minutes for the first boot of a rom.
AldenIsRad said:
You do know first boots take a while right? You should wait up to or at least 10 minutes for the first boot of a rom.
Click to expand...
Click to collapse
I'll try again when I get home. Thanks
Sent from my SCH-I605 using xda app-developers app
I'm actually having a similar, if more limited, problem. I recently tried flashing P.A.C. rom onto my Note 2, but it would just hang on the galaxy note 2 screen. I left it for more than 10 minutes without change. However, after that I tried flashing Cyanogen; which worked just fine.
I'd greatly appreciate any tips on how to figure out what's going wrong.
Epsilon Rose said:
I'm actually having a similar, if more limited, problem. I recently tried flashing P.A.C. rom onto my Note 2, but it would just hang on the galaxy note 2 screen. I left it for more than 10 minutes without change. However, after that I tried flashing Cyanogen; which worked just fine.
I'd greatly appreciate any tips on how to figure out what's going wrong.
Click to expand...
Click to collapse
I never had these issues flashing roms except for one I might try with CWR
Sent from my SCH-I605 using xda app-developers app
killa408shark said:
I never had these issues flashing roms except for one I might try with CWR
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Huh? Did I misinterpret something?
In the op you said:
for some reason my phone will get stuck on the "Galaxy note 2" screen or return to the TWRP menu I tried to flash at least 5 different roms and same results the only one It was able to boot was Clean rom 3.1.
Click to expand...
Click to collapse
Which seemed pretty similar.
Epsilon Rose said:
Huh? Did I misinterpret something?
In the op you said:
Which seemed pretty similar.
Click to expand...
Click to collapse
Before I never had issues till a couple days ago. Like you i waited for more than 10 minutes and never booted up
Sent from my Transformer TF101 using xda app-developers app
And now it works.
So, I seem to actually have things working now and I figured I should give a quick update.
Before, I was using a nightly of P.A.C. rom, because I didn't see anything more stable at the time. Now I've switched to a milestone rom and it boots just fine. At this point, I think I'd pin the blame on a glitch the rom I was trying to flash; given the fact that Cyanogen and the current iteration work fine
Hello . iam having issues , after flashing a rom for my htc one m7 , s-On , after flashing it . stupid cos i had mybe to change to S-Off, anyway the phone now stuck on the welcome page from the new ROM , and i get on display a message "Unfortunately ,Google Text-to speech Engine has stopped , i cant though press anything . . i try to get in to recovery but cant . now in the left corner says Safe mode . Very frustrated ... any advice=? iam a mac owner but i could use my moms .
i got a few days before i go abroad and i would preffer having the phone with me .. .. i dont know what to do .
i try to find some info here .. maybe if some one knows that there is some info here sent me the link?
marjanna said:
Hello . iam having issues , after flashing a rom for my htc one m7 , s-On , after flashing it . stupid cos i had mybe to change to S-Off, anyway the phone now stuck on the welcome page from the new ROM , and i get on display a message "Unfortunately ,Google Text-to speech Engine has stopped , i cant though press anything . . i try to get in to recovery but cant . now in the left corner says Safe mode . Very frustrated ... any advice=? iam a mac owner but i could use my moms .
i got a few days before i go abroad and i would preffer having the phone with me .. .. i dont know what to do .
i try to find some info here .. maybe if some one knows that there is some info here sent me the link?
Click to expand...
Click to collapse
Sorry to say this is the verizon note ii q&a. I'm not even sure which HTC one m7 variant you have to point you to the correct forum.
MunkinDrunky said:
Sorry to say this is the verizon note ii q&a. I'm not even sure which HTC one m7 variant you have to point you to the correct forum.
Click to expand...
Click to collapse
Edited: Thanks i found it and i fixed the problem .

[Q] Canvas A116 hangs on locking

Hello,
Guys, my mobile hangs often. While I am using my mobile it will be working fine. But, when the screen locks automatically or when I lock screen manually, it stucks. I cannot unlock again. Simply black screen.
I have to remove battery and do hard reboot so that it will work fine again. It is not happening all the time. But daily at-least twice it is happening. But most of the time it is working good. I can lock and unlock manually. I can unlock after an automatic lock.
Any solution, is this because of the memory usage?? I am not an expert in mobiles and I just started exploring your site. I need your help friends.
--
Nivas
bnivas said:
Hello,
Guys, my mobile hangs often. While I am using my mobile it will be working fine. But, when the screen locks automatically or when I lock screen manually, it stucks. I cannot unlock again. Simply black screen.
I have to remove battery and do hard reboot so that it will work fine again. It is not happening all the time. But daily at-least twice it is happening. But most of the time it is working good. I can lock and unlock manually. I can unlock after an automatic lock.
Any solution, is this because of the memory usage?? I am not an expert in mobiles and I just started exploring your site. I need your help friends.
--
Nivas
Click to expand...
Click to collapse
why not you install any other rom and check...may works
Luffy.d said:
why not you install any other rom and check...may works
Click to expand...
Click to collapse
Luffy, My phone is still in warranty period. If I flash custom ROM, warranty cannot be claimed in any case. So thinking about that.
Also, I haven't flashed customer ROM before. I may crash the phone. If you have any links that show exact steps to do I can try. I know nothing in flashing, if I have detailed procedure for noobs I can try.
Thanks
--
Nivas
bnivas said:
Luffy, My phone is still in warranty period. If I flash custom ROM, warranty cannot be claimed in any case. So thinking about that.
Also, I haven't flashed customer ROM before. I may crash the phone. If you have any links that show exact steps to do I can try. I know nothing in flashing, if I have detailed procedure for noobs I can try.
Thanks
--
Nivas
Click to expand...
Click to collapse
Don't Worry Bro....its Easy
To Install Any Custom You Have To Follow The Steps On The Rom Thread Mention by OP
But Before Fist You Need To Install any custom recovery and root
for this follow this Guide
bnivas said:
Luffy, My phone is still in warranty period. If I flash custom ROM, warranty cannot be claimed in any case. So thinking about that.
Also, I haven't flashed customer ROM before. I may crash the phone. If you have any links that show exact steps to do I can try. I know nothing in flashing, if I have detailed procedure for noobs I can try.
Thanks
--
Nivas
Click to expand...
Click to collapse
Chillax...bro even if phone in warranty period...if u face ny problem...u can flash stock rom nd ull get back ur warranty like magic.....
Sent from my GT-I9300 using XDA Premium App
Guys can you recommend any custom ROM which is stable and good ? Anyone have hand-on experience in that?
--
Nivas
bnivas said:
Guys can you recommend any custom ROM which is stable and good ? Anyone have hand-on experience in that?
--
Nivas
Click to expand...
Click to collapse
SLD by @cmahendra ..... Its not a ROM its butter as said by @wrick17 !! Download it and I bet you will never switch to any other ROM...
Sent from my Micromax A116 using XDA Premium 4 mobile app
bnivas said:
Hello,
Guys, my mobile hangs often. While I am using my mobile it will be working fine. But, when the screen locks automatically or when I lock screen manually, it stucks. I cannot unlock again. Simply black screen.
I have to remove battery and do hard reboot so that it will work fine again. It is not happening all the time. But daily at-least twice it is happening. But most of the time it is working good. I can lock and unlock manually. I can unlock after an automatic lock.
Any solution, is this because of the memory usage?? I am not an expert in mobiles and I just started exploring your site. I need your help friends.
--
Nivas
Click to expand...
Click to collapse
What kind of lock you'r using? Slide, camera, voice? Best to use slide. No lags works best.
Happy to help.
Owns : Canvas HD a116
Microamax HD A116 hanging issue
kapilmahawar said:
What kind of lock you'r using? Slide, camera, voice? Best to use slide. No lags works best.
Happy to help.
Owns : Canvas HD a116
Click to expand...
Click to collapse
I bought this phone 2 years back as soon as it got released and using this even now and has been using with 3G since then and till last month.
The hanging problem explained in this series of issues has started happening on my phone from last month only.
Any remedy with the same , As i repeated the steps told above and the problem still persists.
Regards
Srivathsa E.S
9980933564

Categories

Resources