Related
Sorry to ask but I need some help to get CWM on my Venue. I have looked at as many post as I could trying to figure it out. I can get it to say fastboot mode 2 on my Venue but I can't get any commands to work. Please do not redirect me to some other post. Any help would be appreciated.
What have you tried so far - what drivers have you downloaded & installed? We need to figure out where you are in the process and what you have done so far to help you finish.
The instructions at http://forum.xda-developers.com/showthread.php?t=1423002 do work, with one addition. Under the "install instructions", you need to rename the CWM file downloaded to just recovery.img and put it in the same folder as your fastboot files, then when performing step 5 you can type "fastboot flash recovery recovery.img" and it works just fine.
My fastboot download must have been corrupt but I re downloaded and worked like a charm, thanks for your reply
I wanted to unlock my bootloader and install a custom rom but my windows won't recognise the fastboot mode so I started up with linux
I saw tutorials of recoveryX.exe and flashtool which only works for windows so I was searching for a manual way so that I could do it in the terminal ..
so I found some tutorial online which told me to flash some file something like
fastboot flash boot xyz.inf I don't remember the extension perfectly but it wasn't a zip or an img ..
and after that my phone turned off, I can still go for fastboot mode but I don't see anything on the screen please help me
I do not have windows so I cannot use flashtool or recoveryX.exe
awaisthebest said:
I wanted to unlock my bootloader and install a custom rom but my windows won't recognise the fastboot mode so I started up with linux
I saw tutorials of recoveryX.exe and flashtool which only works for windows so I was searching for a manual way so that I could do it in the terminal ..
so I found some tutorial online which told me to flash some file something like
fastboot flash boot xyz.inf I don't remember the extension perfectly but it wasn't a zip or an img ..
and after that my phone turned off, I can still go for fastboot mode but I don't see anything on the screen please help me
I do not have windows so I cannot use flashtool or recoveryX.exe
Click to expand...
Click to collapse
using flash tool flash the boot.img present in the rom zip
and install the rom
awaisthebest said:
I wanted to unlock my bootloader and install a custom rom but my windows won't recognise the fastboot mode so I started up with linux
I saw tutorials of recoveryX.exe and flashtool which only works for windows so I was searching for a manual way so that I could do it in the terminal ..
so I found some tutorial online which told me to flash some file something like
fastboot flash boot xyz.inf I don't remember the extension perfectly but it wasn't a zip or an img ..
and after that my phone turned off, I can still go for fastboot mode but I don't see anything on the screen please help me
I do not have windows so I cannot use flashtool or recoveryX.exe
Click to expand...
Click to collapse
Congrats for the brick.
Can you still get into fastboot/flash mode?
I've yet to hear about someone who used rexoveryx and it worked, forget all about it.
There is flashtool for linux, you can use it.
BTW, the only files you flash with fastboot, are with img, elf or sin extention.
ChikeD said:
Congrats for the brick.
Can you still get into fastboot/flash mode?
I've yet to hear about someone who used rexoveryx and it worked, forget all about it.
There is flashtool for linux, you can use it.
BTW, the only files you flash with fastboot, are with img, elf or sin extention.
Click to expand...
Click to collapse
yes yes I can still get into the fastboot and flash mode both!
and yes the file was elf format I remember now.
P.S : I'm downloading the flashtool for linux right now, I just hope it works, its of my friends' and I took it with a guarantee that I'll give you with a better firmware :/ He's been calling me since morning lol .. I'm doomed :/
guys? is there any hope?
bharathbondfire said:
using flash tool flash the boot.img present in the rom zip
and install the rom
Click to expand...
Click to collapse
Thank you for your reply
I'm downloading flast tool for linux right now and I'll then flash the boot.img present in the rom itself..
anything else that I can try if this doesn't work?
can anybody give me a link to CWM recovery's file and a way to flash it :/
P.P.S : I'm really really sorry for being sucha noob/dumbas* :/ but I just finished downloading flashtool and I cannot seem to install it I mean gosh! Linux is soo complicated.
I have downloaded a 7z file .. in which there's a file of tar extension which after I double click directs me to a folder named Flash Tools in which there are multiple forlder that include custom, deviced, drivers, firmwares etc
awaisthebest said:
Thank you for your reply
I'm downloading flast tool for linux right now and I'll then flash the boot.img present in the rom itself..
anything else that I can try if this doesn't work?
can anybody give me a link to CWM recovery's file and a way to flash it :/
if u have downloaded the flash tool copy boot.img to flash tool folder
enter fast boot press ok press on select a kernel to flash
and choose the kernel
and press enter.
Click to expand...
Click to collapse
bharathbondfire said:
awaisthebest said:
Thank you for your reply
I'm downloading flast tool for linux right now and I'll then flash the boot.img present in the rom itself..
anything else that I can try if this doesn't work?
can anybody give me a link to CWM recovery's file and a way to flash it :/
if u have downloaded the flash tool copy boot.img to flash tool folder
enter fast boot press ok press on select a kernel to flash
and choose the kernel
and press enter.
Click to expand...
Click to collapse
I have downloaded flash tool for linux but I cannot get it work .. I cannot get it to install or anything
isn't there a way to do all this manually through Terminal Fastboot commands?
That's the only thing that I can manage to work.
Edit : I have flashed the boot.img file from the downloaded ROM I did it this way (fastboot flash boot boot.img)
and now fortunately the phone starts and also now can be charged but the OS doesn't start .. I think this can be because I haven't flashed the OS but only the boot img?
what can I do now?
P.S : I cannot use the Flashtool or RecoveryX :/ so if there's a way to do it via fastboot or something it will really be appreciated
Click to expand...
Click to collapse
awaisthebest said:
bharathbondfire said:
I have downloaded flash tool for linux but I cannot get it work .. I cannot get it to install or anything
isn't there a way to do all this manually through Terminal Fastboot commands?
That's the only thing that I can manage to work.
Edit : I have flashed the boot.img file from the downloaded ROM I did it this way (fastboot flash boot boot.img)
and now fortunately the phone starts and also now can be charged but the OS doesn't start .. I think this can be because I haven't flashed the OS but only the boot img?
what can I do now?
P.S : I cannot use the Flashtool or RecoveryX :/ so if there's a way to do it via fastboot or something it will really be appreciated
Click to expand...
Click to collapse
if u have rom in the sd
flash boot.img and flash rom
remember to wipe full system
Click to expand...
Click to collapse
bharathbondfire said:
awaisthebest said:
if u have rom in the sd
flash boot.img and flash rom
remember to wipe full system
Click to expand...
Click to collapse
I finally flashed the CM9 4.0.4 rom thankyou for all of your help I appreciate everything
P.S : The led bottom light still doesn't work I don't know why, but the phone and the OS is working perfectly fine! Thank you again
Click to expand...
Click to collapse
PLEASE HELP ,i have a sony xperia z ultra g.p.e with 4.4.4 rooted and a locked bootloader which i managed to delete a system file and immediately started boot looping the boot animation.
I can still get into the stock recovery.
I've searched everywhere and all i see is instruction for unlocked bootloader .
I've read that i can't flash an ftf with a locked boot loader,please help
i have a macbook but also have access to a windows comp
please if anyone can help me with step by step instruction to bring the phone back to a working state i would forever be thankful.
icotulookn said:
PLEASE HELP ,i have a sony xperia z ultra g.p.e with 4.4.4 rooted and a locked bootloader which i managed to delete a system file and immediately started boot looping the boot animation.
I can still get into the stock recovery.
I've searched everywhere and all i see is instruction for unlocked bootloader .
I've read that i can't flash an ftf with a locked boot loader,please help
i have a macbook but also have access to a windows comp
please if anyone can help me with step by step instruction to bring the phone back to a working state i would forever be thankful.
Click to expand...
Click to collapse
If you do have a GPe DO NOT FLASH AN FTF it will result in a permanent hard brick. Look for DooMLoRD's return to stock thread in GPe development section, it will return you to stock 4.4.2 and then you can let it update from there.
Thank you I will give that a try and post back results
icotulookn said:
Thank you I will give that a try and post back results
Click to expand...
Click to collapse
I must apologize for giving out bad advice. Stock recovery will not allow flashing older firmware.
I think what may be possible is flashing the 4.4.4 system IMG with fastboot. Maybe @egzthunder1 or @blueether will be nice enough to offer some better advice.
adfurgerson said:
I must apologize for giving out bad advice. Stock recovery will not allow flashing older firmware.
I think what may be possible is flashing the 4.4.4 system IMG with fastboot. Maybe @egzthunder1 or @blueether will be nice enough to offer some better advice.
Click to expand...
Click to collapse
OK thanks yea I'm really lost, I've been searching and I can't find any instruction on this.
Is this even possible with a locked boot loader?
icotulookn said:
OK thanks yea I'm really lost, I've been searching and I can't find any instruction on this.
Is this even possible with a locked boot loader?
Click to expand...
Click to collapse
Is it bootlooping or just stuck?
You should be able to flash a 4.4.4 system image
Instructions would be:
Download system_4.4.4.7z from http://forum.xda-developers.com/showthread.php?t=2799423
Extract the system_4.4.4.img
Code:
fastboot flash system <path_to_system_4.4.4.img>
blueether said:
Is it bootlooping or just stuck?
You should be able to flash a 4.4.4 system image
Instructions would be:
Download system_4.4.4.7z from http://forum.xda-developers.com/showthread.php?t=2799423
Extract the system_4.4.4.img
Code:
fastboot flash system <path_to_system_4.4.4.img>
Click to expand...
Click to collapse
Its boot looping the boot animation over and over .
OK this is my first Sony phone, I'm sorta familiar with fast boot from my HTC days but its been along time
If I remember correctly I had to install android SDK and fast boot, do I need all the same in this case?
Like i said its been along time and i would be thankfull for any and all instruction given ...
icotulookn said:
OK thanks yea I'm really lost, I've been searching and I can't find any instruction on this.
Is this even possible with a locked boot loader?
Click to expand...
Click to collapse
Again I apologize for posting without refreshing my memory by looking up the older threads. There was two issues with my first post.
1. Stock recovery will not allow flashing older firmware as I mentioned.
2. There is an edited ota zip but it needs to be flashed with custom recovery, which I believe can only be used with an unlocked bootloader.
Hopefully fastboot flashing the system img does the trick.
---------- Post added at 12:22 AM ---------- Previous post was at 12:20 AM ----------
icotulookn said:
Its boot looping the boot animation over and over .
OK this is my first Sony phone, I'm sorta familiar with fast boot from my HTC days but its been along time
If I remember correctly I had to install android SDK and fast boot, do I need all the same in this case?
Like i said its been along time and i would be thankfull for any and all instruction given ...
Click to expand...
Click to collapse
This should do what you need.
http://forum.xda-developers.com/showthread.php?t=2317790
Thank you so much for the fast replies and the assistance, I think I just need the Sony drivers which I can do a search for.
Its getting late so I will give it a go tomorrow and report back.
Fingers Crossed !!
icotulookn said:
Thank you so much for the fast replies and the assistance, I think I just need the Sony drivers which I can do a search for.
Its getting late so I will give it a go tomorrow and report back.
Fingers Crossed !!
Click to expand...
Click to collapse
Easiest way to get the drivers may to download flashtool and grab them from the drivers folder.
ok I'm on a windows 8 comp and I've downloaded and installed adb and fast boot along with the sony drivers ..i have the phone in fast boot mode and usb connected and no matter what i do i can't get the comp to connect with the phone, am i missing something with windows 8 ?
am i doing something wrong with driver installation?
What am i doing wrong? i will gladly and thankfully accept any advice..
icotulookn said:
ok I'm on a windows 8 comp and I've downloaded and installed adb and fast boot along with the sony drivers ..i have the phone in fast boot mode and usb connected and no matter what i do i can't get the comp to connect with the phone, am i missing something with windows 8 ?
am i doing something wrong with driver installation?
What am i doing wrong? i will gladly and thankfully accept any advice..
Click to expand...
Click to collapse
Yes Windows 8 is a pain, Google for "disable driver signature verification in Windows 8" and see if that helps.
blueether said:
Is it bootlooping or just stuck?
You should be able to flash a 4.4.4 system image
Instructions would be:
Download system_4.4.4.7z from http://forum.xda-developers.com/showthread.php?t=2799423
Extract the system_4.4.4.img
Code:
fastboot flash system <path_to_system_4.4.4.img>
Click to expand...
Click to collapse
please help me , i put the system_4.4.4.img in drive C:\ and I'm having a problem remembering how to do the flash boot commands ,,what i have done is "fastboot flash system system_4.4.4.img" but without the quotes and its not working, can u tell me how to direct it to the path of C:\ because I'm pulling my hair out..can u help?
adfurgerson said:
Yes Windows 8 is a pain, Google for "disable driver signature verification in Windows 8" and see if that helps.
Click to expand...
Click to collapse
i think i got it but i can't remember the how to do the fastboot to where the system file is.
the file name is (system_4.4.4.img) and i have it on the C:\ drive
can u tell me the exact command for fast boot to that file?
many many thanks
icotulookn said:
please help me , i put the system_4.4.4.img in drive C:\ and I'm having a problem remembering how to do the flash boot commands ,,what i have done is "fastboot flash system system_4.4.4.img" but without the quotes and its not working, can u tell me how to direct it to the path of C:\ because I'm pulling my hair out..can u help?
Click to expand...
Click to collapse
You need the whole path ex. C:\user\icotulookn\downloads\4.4.4 system img.
I am positive I found the file and was able to copy and paste the path into adb, not sure if that works for fastboot.
adfurgerson said:
You need the whole path ex. C:\user\icotulookn\downloads\4.4.4 system img.
I am positive I found the file and was able to copy and paste the path into adb, not sure if that works for fastboot.
Click to expand...
Click to collapse
i have it directly on C:\ so would i go
fastboot flash system system_4.4.4.img C:\
when i go( fastboot flash system system_4.4.4.img ) it starts but then says<remote:command not allowed
icotulookn said:
i have it directly on C:\ so would i go
fastboot flash system system_4.4.4.img C:\
when i go( fastboot flash system system_4.4.4.img ) it starts but then says<remote:command not allowed
Click to expand...
Click to collapse
I havent used windows (if I can help it) for near 15 years but something like
fastboot flash system C:\system_4.4.4.img
"remote:command not allowed" is probably because of the locked BootLoader, I thought that may happen
Do you know what the fole you deleted was? you may be able to adb push it back onto the system if the GPe boots far enough.
The only other options I can think of are:
Ask Sony for a singed update.zip of the full 4.4.4 (no patch files) so it can be flashed by the stock recovery
Or use adb to do an oem unlock* - but this will wipe DRM keys and render the camera without auto focus
* You could try and run TA backup, but I think it will fail to gain root to do the back up... can you get shell access to the device? "adb shell"
Gonna suggest something off the left field, but if you have access to stock recovery... Have you tried doing a full wipe? I mean, unless ypu royally messed something up elsewhere, flashing system would give you the same end result as a full wipe.
Hopefully this helps.
blueether said:
I havent used windows (if I can help it) for near 15 years but something like
fastboot flash system C:\system_4.4.4.img
"remote:command not allowed" is probably because of the locked BootLoader, I thought that may happen
Do you know what the fole you deleted was? you may be able to adb push it back onto the system if the GPe boots far enough.
The only other options I can think of are:
Ask Sony for a singed update.zip of the full 4.4.4 (no patch files) so it can be flashed by the stock recovery
Or use adb to do an oem unlock* - but this will wipe DRM keys and render the camera without auto focus
* You could try and run TA backup, but I think it will fail to gain root to do the back up... can you get shell access to the device? "adb shell"
Click to expand...
Click to collapse
Some things I am wondering.
1. Can 5.0 update be flashed in stock recovery or would.it fail due to missing files?
2. Can a kernel with recovery be hotbooted to flash the edited 4.4.2 ota?
3. Can the 4.4.4 system img be flashed with flashtool?
4. Is there a fastboot command similar to "adb devices" that will confirm it is connected properly?
I swear that I had the same error trying to return GPe to stock using WIN 8.1 laptop, on WIN 7 desktop it worked fine.
adfurgerson said:
Some things I am wondering.
1. Can 5.0 update be flashed in stock recovery or would.it fail due to missing files?
2. Can a kernel with recovery be hotbooted to flash the edited 4.4.2 ota?
3. Can the 4.4.4 system img be flashed with flashtool?
4. Is there a fastboot command similar to "adb devices" that will confirm it is connected properly?
I swear that I had the same error trying to return GPe to stock using WIN 8.1 laptop, on WIN 7 desktop it worked fine.
Click to expand...
Click to collapse
1. Yes it can but you need to place the zip file in a folder that recovery will recognize (/cache or /sd)
2. Technically yes. However, you still need to be unlocked for that AFAIK.
3. I don't see why not
4. Flashtool will confirm if you have a properly connected devices
There are two rules in life for being successful:
1. Never reveal everything you know;
2.
I'm trying to flash twrp.I have gone step by step I can't think of anything that I forgot to do, I did everything that was mentioned here and other places even my device is detected in both adb & fastboot.but I can't flash twrp
I tried these:
1-adb devices
returned a serial number
2-rebooted to bootloader using:
adb reboot bootloader
3-fastboot devices
returned device id(I think)
4-fastboot flash recovery.img
returned error
5-fastboot flash recovery recovery.img
returned error either "command not allowed" or "Operation is not permited"
6-Different combinations of above commands plus flashing command
What is flashing .... in fastboot.It doesn't work. It acts like an unknown command. Does anyone know how to use it correctly? Help of fastboot didn't help
(Attached screenshots=CMD:Command Line in Windows,SCL-U31:My phone screen in fastboot mode)
See it for yourself in screenshot please
Thanks in advance!
P.S I read a lot of other threads,I Couldn't Find anything that helped me solving the problem,So,Any further idea?
No luck still
Guys I'm tryings to flash an stupid twrp recovery or at least get back to original recovery(All firmware packages are in UPDATE.app format and I can't flash it since It says "recovery image verification failed) . System needs its original recovery to do factory reset,right?
Tell me where to go!!!
Any luck? At least please tell me where to go!! I even mentioned it in a lot of other related xda threads they simply tell me it's a stupid OFF Topic replay or thread. I might be a junior member in xda but it's been years that I worked with a lot of phones and now I'm pretty experienced. Bad luck of mine I damaged my note 3 and got this stupid Y6. It was hard to root unlocking bootloader and now I can't flash twrp in fastboot or whatever. Wishing there was a proper tool like odin for devices like this so it was easy to flash twrp. Anyway.
HELP ME PLEASE!!
flightover588 said:
Any luck? At least please tell me where to go!! I even mentioned it in a lot of other related xda threads they simply tell me it's a stupid OFF Topic replay or thread. I might be a junior member in xda but it's been years that I worked with a lot of phones and now I'm pretty experienced. Bad luck of mine I damaged my note 3 and got this stupid Y6. It was hard to root unlocking bootloader and now I can't flash twrp in fastboot or whatever. Wishing there was a proper tool like odin for devices like this so it was easy to flash twrp. Anyway.
HELP ME PLEASE!!
Click to expand...
Click to collapse
What error gave you when you tried to do this command "fastboot flash recovery twrp.img"
Be sure to have usb debugging enabled.
Thespartann said:
What error gave you when you tried to do this command "fastboot flash recovery twrp.img"
Be sure to have usb debugging enabled.
Click to expand...
Click to collapse
Of course I did. And also device is being detected in both adb and fastboot.
As I already mentioned I used flash recovery recovery.img(or twrp.img I have two versions of recovery that I can flash)
The error is=remote operation is not allowed or sometimes operation is not permitted(which seems to have same meaning )
flightover588 said:
Of course I did. And also device is being detected in both adb and fastboot.
As I already mentioned I used flash recovery recovery.img(or twrp.img I have two versions of recovery that I can flash)
The error is=remote operation is not allowed or sometimes operation is not permitted(which seems to have same meaning )
Click to expand...
Click to collapse
OK then.
You can root your device with kingroot/kingoroot, it worked in the past for Huawei Y6, after you rooted your device install flashify and press on "Recovery image" after you granted root access to the app.After that click on select file, download this recovery for y6: https://www.androidfilehost.com/?fid=962187416754472815 and flash the recovery with Flashify.
Done!
I am not responsible for Bricked devices!
After you done all of that you can flash an custom ROM and I recommend to root with magisk. Always make an backup when flashing a ROM!
If I helped a Thanks is appreciated
Thespartann said:
OK then.
You can root your device with kingroot/kingoroot, it worked in the past for Huawei Y6, after you rooted your device install flashify and press on "Recovery image" after you granted root access to the app.After that click on select file, download this recovery for y6: https://www.androidfilehost.com/?fid=962187416754472815 and flash the recovery with Flashify.
Done!
I am not responsible for Bricked devices!
After you done all of that you can flash an custom ROM and I recommend to root with magisk. Always make an backup when flashing a ROM!
If I helped a Thanks is appreciated
Click to expand...
Click to collapse
You uploaded a twrp recovery on AFH just for me? Thank you,man!I appreciate your help. I really do! But Believe it or not I already tried flashify,Rashr and flashfire. These three cause same thing,when I reboot to recovery it says "recovery image verification failed"Then quickly goes to fastboot&rescue mode where I can't still flash twrp using flash command. Referring to firstb post
flightover588 said:
You uploaded a twrp recovery on AFH just for me? Thank you,man!I appreciate your help. I really do! But Believe it or not I already tried flashify,Rashr and flashfire. These three cause same thing,when I reboot to recovery it says "recovery image verification failed"Then quickly goes to fastboot&rescue mode where I can't still flash twrp using flash command. Referring to firstb post
Click to expand...
Click to collapse
Not nice to hear that.
What you could try to do is:
Factory reset/Install an update.app made for SCL-U31 from recovery
Enable Usb debugging again
Reinstall usb drivers (HiSuite)
Lock&Unlock your bootloader again
Try to flash TWRP
Im happy if this worked and i am sorry if i wasted your time, sometimes this happens if you don't have HiSuite installed.
You could try this too:
adb reboot bootloader
adb kill-server
fastboot flash recovery recovery.img
fastboot reboot
Attention, install HiSuite to your PC, Connect the Phone to the PC with the cable, make sure You have usb debbuing is enabled and accept any dialogs that show in your home screen(They do not show on lockscreen) wait so HiSuite installs on the phone(An dialog should show up on the PC) and try flashing TWRP again.
Good luck
flightover588 said:
Guys I'm tryings to flash an stupid twrp recovery or at least get back to original recovery(All firmware packages are in UPDATE.app format and I can't flash it since It says "recovery image verification failed) . System needs its original recovery to do factory reset,right?
Click to expand...
Click to collapse
Is your boatloader unlocked?
You can find about by typing
fastboot oem devices-info
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
you should have flashed vbmeta.img so that you don't get in bootloop
You mean your phone wouldn't go into bootloader by "Vol. down button + power button" holding from power off state?
T59y9 said:
fastboot flash magisk_patched.img
Click to expand...
Click to collapse
Do you mean "fastboot flash recovery magisk_patched.img"??
the correct command is fastboot flash boot magisk_patched.img
Maybe he wrote fastboot flash magisk_patched .img
but I think it would have returned an error
T59y9 said:
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
Click to expand...
Click to collapse
Maybe the rom you downloaded and the base rom running on your device is not the same version, that may cause the error. {Mod edit}
@T59y9
Hi
did you solve in some way?
My realme 7 5G is not rooted.
Just arrived me friday, I udated to new firmware trought recovery. After the reboot did not woke up anymore.
Black screen. no realme logo. nothing.
tried all button combinations, nothing. no boot, no logo, recovery, no fastboot.
tried also with charger attached, with usb on PC.
Nothing...
Any idea to solve my problem?
thank you.
how did you unlock the bootloader?
in depth test app says my model does not support in-depth test
if you are asking me, I did not unlock anything.
just flashing new OS update trought recovery. after that device dead. not buttons combinations to get fastboot or anything else...
gannjunior said:
if you are asking me, I did not unlock anything.
just flashing new OS update trought recovery. after that device dead. not buttons combinations to get fastboot or anything else...
Click to expand...
Click to collapse
oh sorry
any idea how to solve?
T59y9 said:
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
Click to expand...
Click to collapse
same anyone know how to solve this pls :/
First you all. Say the Model Number. You talk about Realme 7/Pro or 5G...
This issues is fixable. Just need extra tools to bypass Google FRP and a factory images ROM versions. Fixed few devices with the same situation!
T59y9 said:
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
Click to expand...
Click to collapse
T59y9 said:
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
Click to expand...
Click to collapse
did you find soultion of this at now because i also have same problem?
I've done the same thing I accidently typed "fastboot flash recovery magisk_patched.img" and now I cannot get out of the boot loop as there is no way due to messed up recovery + boot. I have been reading about finding and downloading a firmware in zip format that can be flashed with "SP Flash Tool" but when I try I cannot get it to work. The Firmware should be for the Realme 7 5G [RMX2111].
If anyone else can figure it out.... Please help!
martinbrettphilo said:
I've done the same thing I accidently typed "fastboot flash recovery magisk_patched.img" and now I cannot get out of the boot loop as there is no way due to messed up recovery + boot. I have been reading about finding and downloading a firmware in zip format that can be flashed with "SP Flash Tool" but when I try I cannot get it to work. The Firmware should be for the Realme 7 5G [RMX2111].
If anyone else can figure it out.... Please help!
Click to expand...
Click to collapse
It'll be kinda hard. You're gonna have to find a stock ROM - not an OTA update - and you're gonna need to use python to extract the contents from the .OFP file. This should be it. https://firmwarefile.com/oppo-realme-7-5g-rmx2111
basically you can follow this tutorial
the only difference is you have to use realme 7 firmware not C3. this is ofp file for rmx2151 you can extract it with ofp extractor. also I link this guide for RMX2155. its bootloader unlock guide for RMX2155, but you also follow that guide to revive RMX2151 (until step 10 is sufficient, unless you want unlocked bootloader too)
SF Flash tool is a quite useful for flashing/unbrick Mediatek phones. just read instruction more carefully from now
immns said:
basically you can follow this tutorial
the only difference is you have to use realme 7 firmware not C3. this is ofp file for rmx2151 you can extract it with ofp extractor. also I link this guide for RMX2155. its bootloader unlock guide for RMX2155, but you also follow that guide to revive RMX2151 (until step 10 is sufficient, unless you want unlocked bootloader too)
SF Flash tool is a quite useful for flashing/unbrick Mediatek phones. just read instruction more carefully from now
Click to expand...
Click to collapse
good. this for Realme 7 :
- Textguide : https://telegra.ph/Hard-Brick-Fix-for-Realme-7-01-25
hello guys, i'm having a problem here, I just installed a pixel plus ui and then installed the magisk app, then I renamed it to a zip file as mentioned in the website and went to flash it on my phone (Realme 7) after flashing successfully completed I pressed the reboot to system option, now it's stuck on the realme logo and doesn't budge anymore... I'm really worried please help me.