I went to upgrade to the new hyperdrive since they sent me the ota. Phone has been acting weird so I was going to do a complete wipe. I took my sd card out which my son took and lost on me and OI can find anywhere. I had another card so d/l new hyperdrive onto other card. I went to wipe cache and install new rom. phone wiped data and now wouldnt install new rom. I dont remember all the build I was on on the phone but I had Hyperdrive 16 before I started this if that helps at all. I am stuck on samsung custom boot screen. I can get into odin recovery and tried recovery but keeps failing. can I get some help I need my phone i have to go to work soon. Thanks
ive tried the rootjunky video with both no wipe and full wipe neither worked. odin failed.
FlipFlop425 said:
ive tried the rootjunky video with both no wipe and full wipe neither worked. odin failed.
Click to expand...
Click to collapse
What files are you trying to flash? Did you use Safestrap to install RLS16?
Sent from my NCC-1701 using Tapatalk.
i had downloaded the new update for hyper drive. Right now my biggest probelm is I cannot get past the splash screen. I can get into download mode though so can we try to figure out how to unbrick me first. Download mode is the only thing I can seem to get into right now
FlipFlop425 said:
i had downloaded the new update for hyper drive. Right now my biggest probelm is I cannot get past the splash screen. I can get into download mode though so can we try to figure out how to unbrick me first. Download mode is the only thing I can seem to get into right now
Click to expand...
Click to collapse
That's why I need to know if you used Safestrap as your recovery. It's very likely you're trying to flash the wrong file with Odin.
If you had Safestrap your build wasn't MDK. If you didn't need Safestrap then your build was MDK.
So I'll ask again, what file are you trying to flash, with Odin, that keeps failing?
riker147 said:
That's why I need to know if you used Safestrap as your recovery. It's very likely you're trying to flash the wrong file with Odin.
If you had Safestrap your build wasn't MDK. If you didn't need Safestrap then your build was MDK.
So I'll ask again, what file are you trying to flash, with Odin, that keeps failing?
Click to expand...
Click to collapse
I used to have to use safestrap. I was trying to flash the mdk file from rootjunky's video on unbricking your phone
FlipFlop425 said:
I used to have to use safestrap. I was trying to flash the mdk file from rootjunky's video on unbricking your phone
Click to expand...
Click to collapse
NO!!! You cannot flash the MDK file, you cannot downgrade the S4! Always ends badly, go to the general section and grab the NC5 full-wipe tar and flash with ODIN.
npjohnson said:
NO!!! You cannot flash the MDK file, you cannot downgrade the S4! Always ends badly, go to the general section and grab the NC5 full-wipe tar and flash with ODIN.
Click to expand...
Click to collapse
I have tried that from SUrge1223. That did not work for me. I cannot get in to my phone to re root it. Is that the right file the one from him?
FlipFlop425 said:
I have tried that from SUrge1223. That did not work for me. I cannot get in to my phone to re root it. Is that the right file the one from him?
Click to expand...
Click to collapse
From here http://forum.xda-developers.com/showthread.php?t=2735172. I would choose the "Full Wipe" version. Make sure you have a good download. Check MD5. Make sure you follow the directions for Odin. If you verify all of that, and it still doesn't work, I'm afraid I won't be any more help. Someone with more knowledge than I have will have to step in. Good luck.
riker147 said:
From here http://forum.xda-developers.com/showthread.php?t=2735172. I would choose the "Full Wipe" version. Make sure you have a good download. Check MD5. Make sure you follow the directions for Odin. If you verify all of that, and it still doesn't work, I'm afraid I won't be any more help. Someone with more knowledge than I have will have to step in. Good luck.
Click to expand...
Click to collapse
I can vouch for the full Version. Saved my bacon.
You have to boot the phone into a special mode that will allow ODIN to funtion
Turn off the SGS4 and boot it into Download/Odin Mode: press and hold the Volume Down, Home and Power buttons simultaneously for a couple of seconds till you see a warning screen. Then press Volume Upkey to enter Download Mode.
I got it!!! Found my Samsung cable and all went well. TY for ALL the help!
FlipFlop425 said:
I got it!!! Found my Samsung cable and all went well. TY for ALL the help!
Click to expand...
Click to collapse
Yeah, it is a really good feeling when that ODIN starts to run like it means it. Nothing beats that first boot up!
Related
In error I attempted to flash a ROM with ROM installer thinking it would use Safety Strap as the recovery. I wrong I was! I got an error saying to take my phone to the nearest Verizon store. I wasnt too worried because I have used Odin to flash the stock image. But this time it didnt work. I have an error message saying to use Kies in recovery mode and try again... I tried that, cant find the SN and Kies cant see the phone fully.
Any suggestions on how to fix this?
Thanks in advance!
JOF
You can get in download mode? Sounds like you can are you using the correct build tar to flash with Odin? Mdk,Me7?
Travisdroidx2 said:
You can get in download mode? Sounds like you can are you using the correct build tar to flash with Odin? Mdk,Me7?
Click to expand...
Click to collapse
I can get into download mode, I used VRUAMDK_NoWipe.tar.md5 odin 1.85 this time and it didnt come back as a fail but didnt reboot either.. Im still stuck...
Thanks for any suggestions.
Olliej said:
I can get into download mode, I used VRUAMDK_NoWipe.tar.md5 odin 1.85 this time and it didnt come back as a fail but didnt reboot either.. Im still stuck...
Thanks for any suggestions.
Click to expand...
Click to collapse
Pull battery. Boot into recovery. Wipe cache. Wipe Data/Factory reset and reboot.
Olliej said:
I can get into download mode, I used VRUAMDK_NoWipe.tar.md5 odin 1.85 this time and it didnt come back as a fail but didnt reboot either.. Im still stuck...
Thanks for any suggestions.
Click to expand...
Click to collapse
I think you used the wrong file... if you were going to use Safe Strap then that means you were probably on ME7 or MI1. MDK phones have the bootloader exploit and custom recoveries, thus negating the need for Safe Strap.
haza12d said:
Pull battery. Boot into recovery. Wipe cache. Wipe Data/Factory reset and reboot.
Click to expand...
Click to collapse
Tried to boot into recovery, held the vol up but that didnt work either...
Crawshayi said:
I think you used the wrong file... if you were going to use Safe Strap then that means you were probably on ME7 or MI1. MDK phones have the bootloader exploit and custom recoveries, thus negating the need for Safe Strap.
Click to expand...
Click to collapse
Are their any other Verizon image files to flash? I dont really care if I have to wipe, just need to get the phone up and running...
Olliej said:
Are their any other Verizon image files to flash? I dont really care if I have to wipe, just need to get the phone up and running...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=43420116
This is a link to the me7 image, after downloading I would verify the md5 to make sure you didnt get a corrupted download. If the md5 doesnt match and you try to flash it youll just get errors. If you had the newest mi1 image flashed then you wont be able to flash the one I linked and will have to download it from the development section.
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk.
hexitnow said:
http://forum.xda-developers.com/showthread.php?p=43420116
This is a link to the me7 image, after downloading I would verify the md5 to make sure you didnt get a corrupted download. If the md5 doesnt match and you try to flash it youll just get errors. If you had the newest mi1 image flashed then you wont be able to flash the one I linked and will have to download it from the development section.
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk.
Click to expand...
Click to collapse
I did try this with the same results... Any other else I should try? Any way to get the SN number for the phone? With the SN I could try to use Kies to flash firmware?
Thanks,
JOF
Olliej said:
I did try this with the same results... Any other else I should try? Any way to get the SN number for the phone? With the SN I could try to use Kies to flash firmware?
Thanks,
JOF
Click to expand...
Click to collapse
If you still have the box for the phone I think its on there.
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk.
Olliej said:
I did try this with the same results... Any other else I should try? Any way to get the SN number for the phone? With the SN I could try to use Kies to flash firmware?
Thanks,
JOF
Click to expand...
Click to collapse
Do you know what version you had originally? MDK or, ME7?
I was originally trying to just go to the new kitkat rom, i believe that was CM11 or something of the sort. But for some reason i cannot do anything with my phone when it comes to installing or changing the recovery. Odin fails every time. One-Click-Root fails every time (which i think is what i used from the beginning to root). I even upgraded ROM manager to pro so i could try the touch based recovery and it will not successfully install a recovery that i can boot into even though it says that it has and shows(ed) the current recovery being the most up-to-date version. And now since ive tried several different today, i have lost root somehow...even thought i just had it and didnt change anything with the root process...just trying to regain even the stock recovery. Basically what happens if i try to boot into recovery mode is it tries for half a second then boots to ODIN mode and in the top left corner it says failed normal boot or something of the sort.
Can someone point me in the right direction? would a factory reset within the android OS help anything? every thing is backed up, so that wont be an issue as far as apps/data and important files goes.
The phone still boots to my "rooted" 4.3 that i have installed, just dont have root privelages any longer...the phone still works as normal...just cant do anything root based...like run titanium backup or supersu, and even ROM manager is NOW giving me an error when trying to install a custom recovery.
I would like to restore to stock MDK so i can start from scratch and install the CM11 KitKat Rom if at all possible...
So you were mdk and loki'd correct...
safestrap powered Hyperdrive 12
decaturbob said:
So you were mdk and loki'd correct...
safestrap powered Hyperdrive 12
Click to expand...
Click to collapse
MDK yes, the loki part im not sure of...but i did try to do that again since having this problem...with no success...
MURD3RD said:
MDK yes, the loki part im not sure of...but i did try to do that again since having this problem...with no success...
Click to expand...
Click to collapse
you would have to to use the loki process to gain root and install the custom recovery at the time. I really can't help as I got into the S4 with ME7 base and been using safestrap.
i also tried following this link
http://forum.xda-developers.com/showthread.php?t=2290798
and it doesnt get past the first ODIN step and gets a fail
attached are some snips of the ODIN screen when it fails
decaturbob said:
you would have to to use the loki process to gain root and install the custom recovery at the time. I really can't help as I got into the S4 with ME7 base and been using safestrap.
Click to expand...
Click to collapse
you got a link to a good working Loki tutorial?
Here's a link to the stock mdk tar file. This will totally wipe your phone. http://www.sxtpdevelopers.com/showthread.php?t=237
Ryno77 said:
Here's a link to the stock mdk tar file. This will totally wipe your phone.
Click to expand...
Click to collapse
i did find that link before and am currently downloading it...but it is taking forever...everything else i download is blazing fast (50Mb D/L speed here at my buddies apartment) but yet this file is only downloading at 50KB/s...and is showing over 9-10 hours for the download to be complete...does anybody have a faster download source?
i know my connection is phenomenal since i downloaded a 9 gig file last night from a different source and it took under an hour...this .tar is less than 2 gigs...shouldnt take that damn long...
i also tried flashing the recovery .tar.md5 from that link...same exact result...
Questions and Help issues go in Q&A and Help section
Thread moved
Thanks
FNSM
kennyglass123 said:
Questions and Help issues go in Q&A and Help section
Thread moved
Thanks
FNSM
Click to expand...
Click to collapse
THANKS!!!
I knew i hadn't put it in the right place...hopefully it'll get more view here...and i can get this thing sorted out
so right now the screen shows (phone)--(yellow triangle)--(computer) and says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
this is after trying to install the stock restore .tar files in the link mentioned above...the device will NO LONGER boot the os and goes to this screen every time. I can still get it into download (Odin) mode though.
MURD3RD said:
i also tried following this link
http://forum.xda-developers.com/showthread.php?t=2290798
and it doesnt get past the first ODIN step and gets a fail
attached are some snips of the ODIN screen when it fails
Click to expand...
Click to collapse
The "fail (auth)" means that you're likely no longer running an MDK bootloader. It's refusing to load the MD2 that's used by Loki.
Do you get the same failure when you try to flash the stock MDK ROM image? What text shows up on your phone when you try to flash the stock?
Since you're stuck at the "Firmware upgrade encountered an issue." it indicates that the bootloader rejected a flash, which means you may have somehow updated to MI1 or later. The message on the phone when the flash fails will tell for sure.
k1mu said:
The "fail (auth)" means that you're likely no longer running an MDK bootloader. It's refusing to load the MD2 that's used by Loki.
Do you get the same failure when you try to flash the stock MDK ROM image? What text shows up on your phone when you try to flash the stock?
Since you're stuck at the "Firmware upgrade encountered an issue." it indicates that the bootloader rejected a flash, which means you may have somehow updated to MI1 or later. The message on the phone when the flash fails will tell for sure.
Click to expand...
Click to collapse
i can't remember what exactly the messages were right now...but currently Kies is trying a recovery "upgrade and initialization"...hopefully this works and my phone can at least be usable again...and THEN ill get back at trying to get the new KitKat, lol
MURD3RD said:
i can't remember what exactly the messages were right now...but currently Kies is trying a recovery "upgrade and initialization"...hopefully this works and my phone can at least be usable again...and THEN ill get back at trying to get the new KitKat, lol
Click to expand...
Click to collapse
You won't be on MDK, so no KitKat.
k1mu said:
You won't be on MDK, so no KitKat.
Click to expand...
Click to collapse
but i have had no problem flashing back to get rooted when i first got the device...even though several threads said it couldnt be done...all i need is to get back to stock and start from scratch...at least i hope this is the case. If it goes ahead and installs the newest 4.3 update...and i truly cant change it due to no exploits yet...then i guess ill have to wait...lol, it could be worse, haha
so kies just finished doing its thing and the phone booted up and is now running 4.3 MK2
MURD3RD said:
so kies just finished doing its thing and the phone booted up and is now running 4.3 MK2
Click to expand...
Click to collapse
That means you lost the mdk bootloader and can only use Safestrap to boot custom rooms :/ you will need to root via saferoot in the development thread first. Then load Safestrap which only has one ROM that currently works (hyper drive 12).
gnubian said:
That means you lost the mdk bootloader and can only use Safestrap to boot custom rooms :/ you will need to root via saferoot in the development thread first. Then load Safestrap which only has one ROM that currently works (hyper drive 12).
Click to expand...
Click to collapse
EDIT: well nevermind...i think i was just crazy to think something different...i am definitely running the latest release of 4.3 from vzw...fml...well at least it can still be rooted. Is there any development for KitKat on the new MK2 software? Ill do some searching around...
i do remember, however, doing something that a tutorial said specifically not to do...and it worked anyway...even though several people responding to the thread said not to do or it would brick the phone...o well i guess...if i find the link ill post it up...
gnubian said:
That means you lost the mdk bootloader and can only use Safestrap to boot custom rooms :/ you will need to root via saferoot in the development thread first. Then load Safestrap which only has one ROM that currently works (hyper drive 12).
Click to expand...
Click to collapse
would you happen to have a link to the safestrap tutorial? i cant seem to locate it...im gunna do some more searching, but if you had a link at the ready, that'd be awesome!!!
EDIT: Found it...no worries
gnubian said:
That means you lost the mdk bootloader and can only use Safestrap to boot custom rooms :/ you will need to root via saferoot in the development thread first. Then load Safestrap which only has one ROM that currently works (hyper drive 12).
Click to expand...
Click to collapse
so i found the thread for this ROM and it doesnt say anything about being able to run on MK2 build...can anyone shed some light on this? it only says MJ7...
"Firmware Upgrade Encountered an Issue" "Device not responding" Samsung Kies
I tried to flash an Android 5.0 ROM earlier, and my phone was only booting to the stock recovery (Safestrap was installed but I did a factory reset). Now, if the phone was turned off by removing the battery, it won't turn on when I hold the power button, or attempt to go into download/recovery mode. Nothing happens. If I plug it in, I can use whatever button combinations as normal. However, I don't think I can get to recovery mode. Both volume down/power and volume down/power/home enter download mode to the phone. I tried to flash a stock ROM in Odin, but it failed. Otherwise, it shows a screen that says " Firmware Upgrade encountered an issue. Please select recovery mode in kies and try again" And when I open kies, it just says "connecting" for an extremely long time until it eventually says "Device not responding" and I can't do anything. What do I have to do to fix this? I can't find anything for this phone that has had this problem or knows how to fix it. I've tried a few different things so far but flashing nothing in odin has worked. Any help is appreciated, thanks in advance.
Bumping for others to hopefully see... I've still made no progress and am in the same situation and simply can't find what I need to do.
What build were you on before you started? What file are you trying to flash with Odin?
Jmick363 said:
I tried to flash an Android 5.0 ROM earlier, and my phone was only booting to the stock recovery (Safestrap was installed but I did a factory reset). Now, if the phone was turned off by removing the battery, it won't turn on when I hold the power button, or attempt to go into download/recovery mode. Nothing happens. If I plug it in, I can use whatever button combinations as normal. However, I don't think I can get to recovery mode. Both volume down/power and volume down/power/home enter download mode to the phone. I tried to flash a stock ROM in Odin, but it failed. Otherwise, it shows a screen that says " Firmware Upgrade encountered an issue. Please select recovery mode in kies and try again" And when I open kies, it just says "connecting" for an extremely long time until it eventually says "Device not responding" and I can't do anything. What do I have to do to fix this? I can't find anything for this phone that has had this problem or knows how to fix it. I've tried a few different things so far but flashing nothing in odin has worked. Any help is appreciated, thanks in advance.
Click to expand...
Click to collapse
Here's the issue: since you have safestrap installed that means you're on the new bootloader. We cannot install anything other than TW based roms from nothing newer than nc5 base. If you can get into download mode, you'll need to flash the full wipe nc5 tar file through Odin. That will get you back on stock and you can re-root from there.
Hightower24 said:
Here's the issue: since you have safestrap installed that means you're on the new bootloader. We cannot install anything other than TW based roms from nothing newer than nc5 base. If you can get into download mode, you'll need to flash the full wipe nc5 tar file through Odin. That will get you back on stock and you can re-root from there.
Click to expand...
Click to collapse
Crap. You're right. I completely forgot about that last night. I was getting frustrated with Hyperdrive because when I was trying to install version 20, the WiFi would never work no matter which modules.zip I flashed.
I got fed up and just wanted to flash something else and I did this without even thinking about it... I can get the phone into download mode, but when I try to flash this in odin, it fails.
I saw someone with the same screen as me with a Note 2 and someone said something about flashing a PIT file or something like that? I think I'm going to look into that next, hopefully I can find some useful links.
riker147 said:
What build were you on before you started? What file are you trying to flash with Odin?
Click to expand...
Click to collapse
Sorry I didn't see this post at first. The file I'm using in Odin is mentioned in the above post. Before I had done anything, I was successfully using Hyperdrive 17.something. I did a factory reset, flashed the Hyperdrive 20 rom, flashed the modules.zip (I used like 3 or 4 different ones and none of them got WiFi to work) and rebooted and let the phone sit for 10 minutes, and when I would try to toggle WiFi, it wouldn't work. To make things worse, every time, when I rebooted, SafeStrap wouldn't load. So I had to go back to the ROM and install Towelroot and root the phone again, then install safestrap and install the recovery again and then I could boot to it. But I could never get the WiFi to work a single time.
Jmick363 said:
Sorry I didn't see this post at first. The file I'm using in Odin is mentioned in the above post. Before I had done anything, I was successfully using Hyperdrive 17.something. I did a factory reset, flashed the Hyperdrive 20 rom, flashed the modules.zip (I used like 3 or 4 different ones and none of them got WiFi to work) and rebooted and let the phone sit for 10 minutes, and when I would try to toggle WiFi, it wouldn't work. To make things worse, every time, when I rebooted, SafeStrap wouldn't load. So I had to go back to the ROM and install Towelroot and root the phone again, then install safestrap and install the recovery again and then I could boot to it. But I could never get the WiFi to work a single time.
Click to expand...
Click to collapse
Use this wifi fix module. It works best for me:
https://www.androidfilehost.com/?fid=23487008491963696
Hightower24 said:
Use this wifi fix module. It works best for me:
https://www.androidfilehost.com/?fid=23487008491963696
Click to expand...
Click to collapse
Thanks for this, but right now I need to be more concerned with actually getting to Safestrap... or stock touchwiz for that matter. Hopefully this will work if I manage to fix the phone.
Jmick363 said:
Thanks for this, but right now I need to be more concerned with actually getting to Safestrap... or stock touchwiz for that matter. Hopefully this will work if I manage to fix the phone.
Click to expand...
Click to collapse
My bad. Here's a link to the tar files. I suggest using the full wipe nc5:
http://forum.xda-developers.com/showthread.php?t=2735172
Hightower24 said:
My bad. Here's a link to the tar files. I suggest using the full wipe nc5:
http://forum.xda-developers.com/showthread.php?t=2735172
Click to expand...
Click to collapse
Using the Full Wipe method on that link, I was able to resolve the problem and at least get back to a working phone. From here I'll use towelroot to root and install safestrap and then install hyperdrive 20 with those modules you linked. To be more specific for anyone reading years from now with the same problem as me, I used odin 1.85 (though many versions work) with the pit file provided from that link with "re=partition, auto reboot and f. reset time" checked in the options. At first, I was having some trouble, but I think it was because the phone had low battery. I plugged it in for a bit, booted it up, and am setting it up right now. Thanks for the help everyone, it's much appreciated. I very much hope that the modules you linked work for me, because if they don't, I have no idea what ROM to use.
I was reading a thread last night where someone listed all of the ROMS working with SafeStrap, but it was from like 2 years ago and almost all of the ROMs had been abandoned.... Is there a more updated list of options? Or just something to look for to make sure a ROM will work right away?
Jmick363 said:
Using the Full Wipe method on that link, I was able to resolve the problem and at least get back to a working phone. From here I'll use towelroot to root and install safestrap and then install hyperdrive 20 with those modules you linked. To be more specific for anyone reading years from now with the same problem as me, I used odin 1.85 (though many versions work) with the pit file provided from that link with "re=partition, auto reboot and f. reset time" checked in the options. At first, I was having some trouble, but I think it was because the phone had low battery. I plugged it in for a bit, booted it up, and am setting it up right now. Thanks for the help everyone, it's much appreciated. I very much hope that the modules you linked work for me, because if they don't, I have no idea what ROM to use.
I was reading a thread last night where someone listed all of the ROMS working with SafeStrap, but it was from like 2 years ago and almost all of the ROMs had been abandoned.... Is there a more updated list of options? Or just something to look for to make sure a ROM will work right away?
Click to expand...
Click to collapse
Hyperdrive and echoerom seem to be the most talked about. I'm running echoe v39.1
Hightower24 said:
Hyperdrive and echoerom seem to be the most talked about. I'm running echoe v39.1
Click to expand...
Click to collapse
So right now things aren't going as smoothly as I would've hoped.... The first time I flashed Hyperdrive and then that modules zip you linked, and the phone got stuck on the Samsung custom screen in some sort of loop. I reset it with odin and just the PDA from the link from before, and I then installed towelroot and safestrap again then flashed hyperdrive and modules and now I'm stuck on the hyperdrive red screen... It's just the boot animation and nothing else. When I take out the battery, the power button does nothing if the phone is not plugged in. When I plug the phone in and hold down the power button, it just shows an empty battery with a loading icon in the middle. I can't do anything else.... I'm going to reset it again now and maybe try installing this echoe rom.... Are you talking about this?
Jmick363 said:
I'm going to reset it again now and maybe try installing this echoe rom.... Are you talking about this?
Click to expand...
Click to collapse
Hightower24 said:
Hyperdrive and echoerom seem to be the most talked about. I'm running echoe v39.1
Click to expand...
Click to collapse
With EchoeRom, where do I find the signal bar fix? Is the wifi fix the thing you linked already? or is it separate from modules zip?
Jmick363 said:
With EchoeRom, where do I find the signal bar fix? Is the wifi fix the thing you linked already? or is it separate from modules zip?
Click to expand...
Click to collapse
Sorry! I had started this reply earlier in the morning then got busy with work. The link for the signal bar fix is in the OP from the forum you found by jds. It's down by the link for v26. I sent you the wifi fix that works for me. If you're going to use v39.1, you will need jrkruse's nk2 patch found here:
http://forum.xda-developers.com/showthread.php?t=2674280
The echoe site is here:
http://echoerom.com/roms/echoefull/s4/i9505/
Flash in this order:
Rom
Nk2 patch (not needed for v29/29.1)
Signal bar fix
WiFi fix
Updated supersu.zip (optional)
Be sure to verify the md5 of the downloads. Good luck!
Hightower24 said:
Sorry! I had started this reply earlier in the morning then got busy with work. The link for the signal bar fix is in the OP from the forum you found by jds. It's down by the link for v26. I sent you the wifi fix that works for me. If you're going to use v39.1, you will need jrkruse's nk2 patch found here:
http://forum.xda-developers.com/showthread.php?t=2674280
The echoe site is here:
http://echoerom.com/roms/echoefull/s4/i9505/
Flash in this order:
Rom
Nk2 patch (not needed for v29/29.1)
Signal bar fix
WiFi fix
Updated supersu.zip (optional)
Be sure to verify the md5 of the downloads. Good luck!
Click to expand...
Click to collapse
No need to apologize!! Your job isn't to monitor me, and I can't thank you enough for all the help. I'm going to give this a shot at some point today, hopefully it'll work. I'll comment back in the thread whatever happens... As you can probably tell, I typically have horrible luck with these things.
So I have had the same issue as the OP after trying to flash to a 5.0 ROM, but my issue is still ongoing, as when I try to flash the stock ROM from this link I get the error that it failed in Odin.
madhavok09 said:
So I have had the same issue as the OP after trying to flash to a 5.0 ROM, but my issue is still ongoing, as when I try to flash the stock ROM from this link I get the error that it failed in Odin.
Click to expand...
Click to collapse
Are you flashing the full wipe? Good download? Check MD5? Using the cable that came with the phone? Try a different USB port?
Sent from my NCC-1701 using Tapatalk.
riker147 said:
Are you flashing the full wipe? Good download? Check MD5? Using the cable that came with the phone? Try a different USB port?
Sent from my NCC-1701 using Tapatalk.
Click to expand...
Click to collapse
Well the OP said he did the wipe with that link I listed, and I would assume it's a good link. I am flashing the full wipe with the PIT file, using the cable that came with the phone, and I have tried using a different USB port. I have tried 3 different MD5 files as well and still have had no luck.
Edit (2:13 PM Eastern): Had the wrong file after some digging, and got the NC5 instead of the MK2. Phone is booting normally. Thanks for the help.
I'm sure this has been asked before but I have no idea how to find the right thread, I've been searching but I'm not sure which method to use. I used towel root to root my S4 with NC5 build running 4.4.2 a while back and lately my phone has been randomly powering off. It shuts down instantly as if holding down the power button for 10 seconds. I'm not sure if this matters but I have xposed installed and before I found out about the locked bootloader I tried to install TWRP and CWP, so when I boot up it says custom. I want to factory reset the phone to hopefully solve this powering off problem, and I wanna be able to root again so I can put xposed back on. I have a laptop to use odin on if I need to. If someone could help me out it would be very much appreciated.
Start here.
http://forum.xda-developers.com/showthread.php?t=2735172
-
meazz1 said:
Start here.
http://forum.xda-developers.com/showthread.php?t=2735172
-
Click to expand...
Click to collapse
Thank you that helps so much. So I should do the full wipe correct? And how do I extract the PIT file? Should I just download the one from the thread?
Autokill45 said:
Thank you that helps so much. So I should do the full wipe correct? And how do I extract the PIT file? Should I just download the one from the thread?
Click to expand...
Click to collapse
You want stock yes? Should just download Odin and the NC5 image. Place the NC5 in PDA if I remember correctly, been a while but should be. Once it is flashed you can then re root and do what not And yes I would do full wipe.
Illogi.xbone said:
You want stock yes? Should just download Odin and the NC5 image. Place the NC5 in PDA if I remember correctly, been a while but should be. Once it is flashed you can then re root and do what not
Click to expand...
Click to collapse
Yes I want stock NC5 so I can use towel root again. Sorry if these are stupid questions, this is my only experience with anything like this and I'm having trouble understanding.
So I should download Odin amd the full wipe NC5 image, unzip the image and place it in AP correct? But in the video he talks about drivers, do I need these and if so where do I get them? And in the thread under the directions for the full wipe step 3 says to extract the PIT file from your phone, do I need to do that?
Autokill45 said:
Yes I want stock NC5 so I can use towel root again. Sorry if these are stupid questions, this is my only experience with anything like this and I'm having trouble understanding.
So I should download Odin amd the full wipe NC5 image, unzip the image and place it in AP correct? But in the video he talks about drivers, do I need these and if so where do I get them? And in the thread under the directions for the full wipe step 3 says to extract the PIT file from your phone, do I need to do that?
Click to expand...
Click to collapse
We all start from somewhere :highfive: Yes, follow the instructions to the letter. Follow step 3 and you are golden. First Check to see if you already have drivers installed. Open Odin with your phone in download mode and plug it in. If Odin finds it then you already have the drivers if not windows may install them for you, if you are on 7 and up I know for sure. :laugh: Had to use Odin a lot before with my old S4.
Well I finally figured it out. Nearly had a heart attack when I pushed the run button lol. Thank you guys so much for the help!
Autokill45 said:
Well I finally figured it out. Nearly had a heart attack when I pushed the run button lol. Thank you guys so much for the help!
Click to expand...
Click to collapse
No problemo man :highfive:
I did the full wipe via Odin to restore to NC5 and the only hiccup I'm having is that WiFi will not connect. I've done multiple reboots, too, just FYI.
Any suggestions, please?
Do you have Safestrap installed? Sounds like you need the right modem.
Sent from my SCH-I545 using XDA Free mobile app
So, recently I rooted my GS4 SCH-I545 and wanted to install a custom rom. I installed ROM Manager and tried to install a custom recovery, but overtime I would go into recovery, it would show a dying android with the message "No Command" on the screen, then It would take me to the stock recovery.
-------------------------------------------------------
Later I downloaded TWRP Manager and looked for a custom recovery there. I found one that seemed right and downloaded it. It rebooted my phone and instead of taking me to recovery mode, it took me to the ODIN downloading screen, but on top it said, "COULD NOT DO A NORMAL BOOT" and it said Downloading. The only way to get onto the phone was for me to go to ODIN and flash OC1 firmware onto the phone, and then it would boot up. Otherwise, now I cannot do a factory reset, and/or go into recovery mode.
Is there any possible solutions on how to get the phone back to normal?
-------------------------------------------------------
BTW: My Baseband or Boot-loader is: I545VRUGOF1
Try flashing the full of1 tar
whowatchlist said:
Try flashing the full of1 tar
Click to expand...
Click to collapse
Ok then, but I have a few questions. First, what will this do to my phone? My next question is, will this brick my phone? Lastly, do I download the TAR, click the AP button on ODIN, click the TAR file, then flash it to my Phone?
---By the way, can you give me a link to the OF1 tar?
I have the OF1 ".tar.md5", also I can get you back to running prefect stock, then guide you thru the right steps to root and fix up your device!
Message me on hangouts, or PM me here!
Sent from my SCH-I545 using Tapatalk
KaosMaster said:
I have the OF1 ".tar.md5", also I can get you back to running prefect stock, then guide you thru the right steps to root and fix up your device!
Message me on hangouts, or PM me here!
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Ok, then what is your Hangout, so I can add you. Otherwise, its fine if you tell me the steps here. Although, it'd be better if you send me the steps on Hangouts.