"Firmware Upgrade Encountered an Issue" "Device not responding" Samsung Kies
I tried to flash an Android 5.0 ROM earlier, and my phone was only booting to the stock recovery (Safestrap was installed but I did a factory reset). Now, if the phone was turned off by removing the battery, it won't turn on when I hold the power button, or attempt to go into download/recovery mode. Nothing happens. If I plug it in, I can use whatever button combinations as normal. However, I don't think I can get to recovery mode. Both volume down/power and volume down/power/home enter download mode to the phone. I tried to flash a stock ROM in Odin, but it failed. Otherwise, it shows a screen that says " Firmware Upgrade encountered an issue. Please select recovery mode in kies and try again" And when I open kies, it just says "connecting" for an extremely long time until it eventually says "Device not responding" and I can't do anything. What do I have to do to fix this? I can't find anything for this phone that has had this problem or knows how to fix it. I've tried a few different things so far but flashing nothing in odin has worked. Any help is appreciated, thanks in advance.
Bumping for others to hopefully see... I've still made no progress and am in the same situation and simply can't find what I need to do.
What build were you on before you started? What file are you trying to flash with Odin?
Jmick363 said:
I tried to flash an Android 5.0 ROM earlier, and my phone was only booting to the stock recovery (Safestrap was installed but I did a factory reset). Now, if the phone was turned off by removing the battery, it won't turn on when I hold the power button, or attempt to go into download/recovery mode. Nothing happens. If I plug it in, I can use whatever button combinations as normal. However, I don't think I can get to recovery mode. Both volume down/power and volume down/power/home enter download mode to the phone. I tried to flash a stock ROM in Odin, but it failed. Otherwise, it shows a screen that says " Firmware Upgrade encountered an issue. Please select recovery mode in kies and try again" And when I open kies, it just says "connecting" for an extremely long time until it eventually says "Device not responding" and I can't do anything. What do I have to do to fix this? I can't find anything for this phone that has had this problem or knows how to fix it. I've tried a few different things so far but flashing nothing in odin has worked. Any help is appreciated, thanks in advance.
Click to expand...
Click to collapse
Here's the issue: since you have safestrap installed that means you're on the new bootloader. We cannot install anything other than TW based roms from nothing newer than nc5 base. If you can get into download mode, you'll need to flash the full wipe nc5 tar file through Odin. That will get you back on stock and you can re-root from there.
Hightower24 said:
Here's the issue: since you have safestrap installed that means you're on the new bootloader. We cannot install anything other than TW based roms from nothing newer than nc5 base. If you can get into download mode, you'll need to flash the full wipe nc5 tar file through Odin. That will get you back on stock and you can re-root from there.
Click to expand...
Click to collapse
Crap. You're right. I completely forgot about that last night. I was getting frustrated with Hyperdrive because when I was trying to install version 20, the WiFi would never work no matter which modules.zip I flashed.
I got fed up and just wanted to flash something else and I did this without even thinking about it... I can get the phone into download mode, but when I try to flash this in odin, it fails.
I saw someone with the same screen as me with a Note 2 and someone said something about flashing a PIT file or something like that? I think I'm going to look into that next, hopefully I can find some useful links.
riker147 said:
What build were you on before you started? What file are you trying to flash with Odin?
Click to expand...
Click to collapse
Sorry I didn't see this post at first. The file I'm using in Odin is mentioned in the above post. Before I had done anything, I was successfully using Hyperdrive 17.something. I did a factory reset, flashed the Hyperdrive 20 rom, flashed the modules.zip (I used like 3 or 4 different ones and none of them got WiFi to work) and rebooted and let the phone sit for 10 minutes, and when I would try to toggle WiFi, it wouldn't work. To make things worse, every time, when I rebooted, SafeStrap wouldn't load. So I had to go back to the ROM and install Towelroot and root the phone again, then install safestrap and install the recovery again and then I could boot to it. But I could never get the WiFi to work a single time.
Jmick363 said:
Sorry I didn't see this post at first. The file I'm using in Odin is mentioned in the above post. Before I had done anything, I was successfully using Hyperdrive 17.something. I did a factory reset, flashed the Hyperdrive 20 rom, flashed the modules.zip (I used like 3 or 4 different ones and none of them got WiFi to work) and rebooted and let the phone sit for 10 minutes, and when I would try to toggle WiFi, it wouldn't work. To make things worse, every time, when I rebooted, SafeStrap wouldn't load. So I had to go back to the ROM and install Towelroot and root the phone again, then install safestrap and install the recovery again and then I could boot to it. But I could never get the WiFi to work a single time.
Click to expand...
Click to collapse
Use this wifi fix module. It works best for me:
https://www.androidfilehost.com/?fid=23487008491963696
Hightower24 said:
Use this wifi fix module. It works best for me:
https://www.androidfilehost.com/?fid=23487008491963696
Click to expand...
Click to collapse
Thanks for this, but right now I need to be more concerned with actually getting to Safestrap... or stock touchwiz for that matter. Hopefully this will work if I manage to fix the phone.
Jmick363 said:
Thanks for this, but right now I need to be more concerned with actually getting to Safestrap... or stock touchwiz for that matter. Hopefully this will work if I manage to fix the phone.
Click to expand...
Click to collapse
My bad. Here's a link to the tar files. I suggest using the full wipe nc5:
http://forum.xda-developers.com/showthread.php?t=2735172
Hightower24 said:
My bad. Here's a link to the tar files. I suggest using the full wipe nc5:
http://forum.xda-developers.com/showthread.php?t=2735172
Click to expand...
Click to collapse
Using the Full Wipe method on that link, I was able to resolve the problem and at least get back to a working phone. From here I'll use towelroot to root and install safestrap and then install hyperdrive 20 with those modules you linked. To be more specific for anyone reading years from now with the same problem as me, I used odin 1.85 (though many versions work) with the pit file provided from that link with "re=partition, auto reboot and f. reset time" checked in the options. At first, I was having some trouble, but I think it was because the phone had low battery. I plugged it in for a bit, booted it up, and am setting it up right now. Thanks for the help everyone, it's much appreciated. I very much hope that the modules you linked work for me, because if they don't, I have no idea what ROM to use.
I was reading a thread last night where someone listed all of the ROMS working with SafeStrap, but it was from like 2 years ago and almost all of the ROMs had been abandoned.... Is there a more updated list of options? Or just something to look for to make sure a ROM will work right away?
Jmick363 said:
Using the Full Wipe method on that link, I was able to resolve the problem and at least get back to a working phone. From here I'll use towelroot to root and install safestrap and then install hyperdrive 20 with those modules you linked. To be more specific for anyone reading years from now with the same problem as me, I used odin 1.85 (though many versions work) with the pit file provided from that link with "re=partition, auto reboot and f. reset time" checked in the options. At first, I was having some trouble, but I think it was because the phone had low battery. I plugged it in for a bit, booted it up, and am setting it up right now. Thanks for the help everyone, it's much appreciated. I very much hope that the modules you linked work for me, because if they don't, I have no idea what ROM to use.
I was reading a thread last night where someone listed all of the ROMS working with SafeStrap, but it was from like 2 years ago and almost all of the ROMs had been abandoned.... Is there a more updated list of options? Or just something to look for to make sure a ROM will work right away?
Click to expand...
Click to collapse
Hyperdrive and echoerom seem to be the most talked about. I'm running echoe v39.1
Hightower24 said:
Hyperdrive and echoerom seem to be the most talked about. I'm running echoe v39.1
Click to expand...
Click to collapse
So right now things aren't going as smoothly as I would've hoped.... The first time I flashed Hyperdrive and then that modules zip you linked, and the phone got stuck on the Samsung custom screen in some sort of loop. I reset it with odin and just the PDA from the link from before, and I then installed towelroot and safestrap again then flashed hyperdrive and modules and now I'm stuck on the hyperdrive red screen... It's just the boot animation and nothing else. When I take out the battery, the power button does nothing if the phone is not plugged in. When I plug the phone in and hold down the power button, it just shows an empty battery with a loading icon in the middle. I can't do anything else.... I'm going to reset it again now and maybe try installing this echoe rom.... Are you talking about this?
Jmick363 said:
I'm going to reset it again now and maybe try installing this echoe rom.... Are you talking about this?
Click to expand...
Click to collapse
Hightower24 said:
Hyperdrive and echoerom seem to be the most talked about. I'm running echoe v39.1
Click to expand...
Click to collapse
With EchoeRom, where do I find the signal bar fix? Is the wifi fix the thing you linked already? or is it separate from modules zip?
Jmick363 said:
With EchoeRom, where do I find the signal bar fix? Is the wifi fix the thing you linked already? or is it separate from modules zip?
Click to expand...
Click to collapse
Sorry! I had started this reply earlier in the morning then got busy with work. The link for the signal bar fix is in the OP from the forum you found by jds. It's down by the link for v26. I sent you the wifi fix that works for me. If you're going to use v39.1, you will need jrkruse's nk2 patch found here:
http://forum.xda-developers.com/showthread.php?t=2674280
The echoe site is here:
http://echoerom.com/roms/echoefull/s4/i9505/
Flash in this order:
Rom
Nk2 patch (not needed for v29/29.1)
Signal bar fix
WiFi fix
Updated supersu.zip (optional)
Be sure to verify the md5 of the downloads. Good luck!
Hightower24 said:
Sorry! I had started this reply earlier in the morning then got busy with work. The link for the signal bar fix is in the OP from the forum you found by jds. It's down by the link for v26. I sent you the wifi fix that works for me. If you're going to use v39.1, you will need jrkruse's nk2 patch found here:
http://forum.xda-developers.com/showthread.php?t=2674280
The echoe site is here:
http://echoerom.com/roms/echoefull/s4/i9505/
Flash in this order:
Rom
Nk2 patch (not needed for v29/29.1)
Signal bar fix
WiFi fix
Updated supersu.zip (optional)
Be sure to verify the md5 of the downloads. Good luck!
Click to expand...
Click to collapse
No need to apologize!! Your job isn't to monitor me, and I can't thank you enough for all the help. I'm going to give this a shot at some point today, hopefully it'll work. I'll comment back in the thread whatever happens... As you can probably tell, I typically have horrible luck with these things.
So I have had the same issue as the OP after trying to flash to a 5.0 ROM, but my issue is still ongoing, as when I try to flash the stock ROM from this link I get the error that it failed in Odin.
madhavok09 said:
So I have had the same issue as the OP after trying to flash to a 5.0 ROM, but my issue is still ongoing, as when I try to flash the stock ROM from this link I get the error that it failed in Odin.
Click to expand...
Click to collapse
Are you flashing the full wipe? Good download? Check MD5? Using the cable that came with the phone? Try a different USB port?
Sent from my NCC-1701 using Tapatalk.
riker147 said:
Are you flashing the full wipe? Good download? Check MD5? Using the cable that came with the phone? Try a different USB port?
Sent from my NCC-1701 using Tapatalk.
Click to expand...
Click to collapse
Well the OP said he did the wipe with that link I listed, and I would assume it's a good link. I am flashing the full wipe with the PIT file, using the cable that came with the phone, and I have tried using a different USB port. I have tried 3 different MD5 files as well and still have had no luck.
Edit (2:13 PM Eastern): Had the wrong file after some digging, and got the NC5 instead of the MK2. Phone is booting normally. Thanks for the help.
Related
Hi Guys,
Sorry to bother you with this, but I'm out of ideas...
I decided to root my i9100 using this guide9.
As I was doing this, the recovery rom would reboot when using the volume buttons to navigate (only on the first "page") - This was easily worked around by using the touchscreen, but now I'm wondering if this was the start of my issues...
I applied the SU busy box installer, and got root. I installed rom manager, and noticed that it seemed to lock up when doing certain things. I put this down to CWM saying there was no official mod for the i9100.
The next day I decided to try and install a CM10.1 nightly, so I took a backup, wiped cache and data, and applied the rom and gapps.
When I rebooted, the phone wouldn't finished booting, it just sat at the initial logo screen.
After that, I tried following this recovery guide but the odin flash failed at around 80% (I retried and the same happened again).
Since then I've had difficulty getting in to recovery mode. I've tried flashing various stock roms with odin, and trying to restore with Kies.
In Kies I get as far as it conencting to the phone in download mode, but it pops up a "notice" in a foreign language - presumably Korean (and I can't copy the text to even attempt a google translation).
I tried flashing Siyah-s2-v5.0.1 to get a different recovery - that seemed to have a garbled progress bar, before hanging when I tried to wipe /data again.
When I use odin to flash a stock rom - is it supposed to restore absolutely everything? I'm not sure how I'm still getting problems if this is the case. Any ideas on what to try next?
(The current stock rom I'm try ing to use is this one)
Let me know if I'm missing any info, and thanks in advance for any help.
Using rom manager would have been the start of your problems-not the temp cwm recovery in the rooting guide.
If you can boot into download mode then I would download LP7 stock rom, disable kies and flash that with Odin.
{go back to your iphone since you are an android noob}
Thanks for the reply.
Rom manager didn't work properly for me, so I stopped using it. I used the temp cwm recovery to install the CM nightly.
I can boot in to download mode, but I've already tried an LP7 rom, - as with the others, it doesn't boot.
Any ideas on how to tell why it isn't booting? logcat doesn't seem to want to to work. Not sure if it's broken / too early in the boot process / etc
Silly Billy said:
Thanks for the reply.
Rom manager didn't work properly for me, so I stopped using it. I used the temp cwm recovery to install the CM nightly.
I can boot in to download mode, but I've already tried an LP7 rom, - as with the others, it doesn't boot.
Any ideas on how to tell why it isn't booting? logcat doesn't seem to want to to work. Not sure if it's broken / too early in the boot process / etc
Click to expand...
Click to collapse
I9100 right?
Try this:
- Download this ROM.
- Kies installed? uninstall it, re install it. Close it all up with Task manager (3 or 4 applications running).
- Flash ROM via Odin (CSC, MODEM, PHONE).
- If that doesn't fly, try another usb port & usb cable. Another PC would also be recommended.
- Repeat the process.
- Still no luck? try flashing a previous siyah version.
- No go? repeat all the above.
- Let us know how you did.
gastonw;37017081- Download this ROM.[/QUOTE said:
Thanks, I'll give it a go. (Will take a while for the file to download from hotfile...).
Are odin images for stock roms supposed to restore the stock recovery, or do they leave that alone?
Click to expand...
Click to collapse
As a matter of interest, how far did you go with Phistachios repair guide.
{go back to your iphone since you are an android noob}
Silly Billy said:
Thanks, I'll give it a go. (Will take a while for the file to download from hotfile...).
Are odin images for stock roms supposed to restore the stock recovery, or do they leave that alone?
Click to expand...
Click to collapse
Focus on getting a ROM to boot.
That ROM will install stock recovery.
gastonw said:
Let us know how you did.
Click to expand...
Click to collapse
For some reason, I can't get Odin to flash that rom - it just hands for a while at the start of data.img, before saying "Complete(Write) operation failed."
There a .pit file in the archive, although the link says not to repartition (so I didn't).
Some roms seem to get written, some don't, I'm not sure why...
theunderling said:
As a matter of interest, how far did you go with Phistachios repair guide.
Click to expand...
Click to collapse
Odin failed about 80% through flashing (step 4, after taking the ICS steps). I tried flashing the kernel afterwards, which flashed, but didn't help with my boot issues.
gastonw said:
Focus on getting a ROM to boot.
That ROM will install stock recovery.
Click to expand...
Click to collapse
Of course, I was just trying to get a better understanding of how things work - I'd settle for anything booting right now.
I was meaning how far did you go with his guide.He says (near the end) to flash a bootloader/kernel/rom.
You can try everything in his guide, but understand about the risks involved with pit and bootloaders.
{go back to your iphone since you are an android noob}
theunderling said:
I was meaning how far did you go with his guide.He says (near the end) to flash a bootloader/kernel/rom.
You can try everything in his guide, but understand about the risks involved with pit and bootloaders.
{go back to your iphone since you are an android noob}
Click to expand...
Click to collapse
He's right.
Keep trying, consider pit files & bootloaders as a last resort.
Tried everything?
Used another usb cable for the flash? tried in another PC? tried in a laptop?
Are you sure kies is all shut down?
I've read about so many people having the same issue than you, they keep on flashing as in trial & error and most times they come out winners.
GL!
gastonw said:
He's right.
Keep trying, consider pit files & bootloaders as a last resort.
Tried everything?
Used another usb cable for the flash? tried in another PC? tried in a laptop?
Are you sure kies is all shut down?
I've read about so many people having the same issue than you, they keep on flashing as in trial & error and most times they come out winners.
GL!
Click to expand...
Click to collapse
I guess I'll keep at it then.
I'd tried another cable with kies shut down. Just tried a different machine, and flashed the ROM you suggested with heimdall. It flashed without complaining (unlike odin), but I'm still getting a boot loop.
Looking at the initial recovery guide I was following - I suspect that I might've flashed the bootloader (the guide shows in bold which file goes in which box, so I probably loaded them all). Maybe this is the source of my troubles...
I also noticed that heimdall can pull data from the phone too - if I can pull and mount these, am I likely to find any useful log files?
For completeness (and anyone else who finds themselves with the same issue): It seems I hit the EMMC brick bug, which rendered some of my EMMC storage unusable.
This helpful chap came up with a workaround to partition around the dead space. (Please read the post carefully and make sure this really is your problem before flashing!)
That method will let you know what part of your memory is corrupted. It's done via recovery as far as I remember.
Did you bring your device back to life?
Sent from the little guy
gastonw said:
That method will let you know what part of your memory is corrupted. It's done via recovery as far as I remember.
Did you bring your device back to life?
Click to expand...
Click to collapse
Yes, that's right. IIRC, I flashed a working recovery with Odin, then did most of the work from adb shell.
I got my device back to life for the most part. I get the occasional hang but haven't investigated much (have since bought a Nexus 4, so not using the S2 so much).
Just thought I'd share for the next poor soul who has the same problem
So, I was on 4.1.2 (running CM 11), and I downloaded the toltevzw_mj9_official_firmware1.tar.md5 and Odin 3.07.
I loaded the toltevzw_mj9_official_firmware1.tar.md5 into the PDA section of ODIN, and booted into download mode.
I ran Odin, and it seemed to work--restarted, Odin said it was successful, but now I have no cellular service and my Baseband Version is "unknown".
I've tried this multiple times, with different computers and different cords. I even flashed back to stock to get the modem back, then tried again. Same result.
Am I using ODIN wrong? Can anyone help me? Please? I have searched these forums, but every thread I found was unhelpful.
Thank you.
beans3660 said:
So, I was on 4.1.2 (running CM 11), and I downloaded the toltevzw_mj9_official_firmware1.tar.md5 and Odin 3.07.
I loaded the toltevzw_mj9_official_firmware1.tar.md5 into the PDA section of ODIN, and booted into download mode.
I ran Odin, and it seemed to work--restarted, Odin said it was successful, but now I have no cellular service and my Baseband Version is "unknown".
I've tried this multiple times, with different computers and different cords. I even flashed back to stock to get the modem back, then tried again. Same result.
Am I using ODIN wrong? Can anyone help me? Please? I have searched these forums, but every thread I found was unhelpful.
Thank you.
Click to expand...
Click to collapse
What I have found to help me and not run into this issue is flash back to stock, and re-root using the causal tool. Then I would install the lastest CWM or TWRP, install 4.3TW rom, boot up, reboot back into download mode, run odin package of the firmware (make sure you have a good md5, a bad download can affect it accepting the upgraded firmware), then wipe data,cache, dalvik and reboot. Then once rebooted confirm your modem was accepted and working, then get a GPS lock, then upgrade to CM11 if thats what you prefer.
bigmike35 said:
What I have found to help me and not run into this issue is flash back to stock, and re-root using the causal tool. Then I would install the lastest CWM or TWRP, install 4.3TW rom, boot up, reboot back into download mode, run odin package of the firmware (make sure you have a good md5, a bad download can affect it accepting the upgraded firmware), then wipe data,cache, dalvik and reboot. Then once rebooted confirm your modem was accepted and working, then get a GPS lock, then upgrade to CM11 if thats what you prefer.
Click to expand...
Click to collapse
So I did most of this, installed Alliance Rom. Now, ODIN won't recognize my device when it is in download mode. It will recognize it when I boot up normally, however. Yet, as soon as I boot into download mode, nothing.
Why is this such a pain in the ass for me? I haven't seen anyone have this much trouble.
beans3660 said:
So I did most of this, installed Alliance Rom. Now, ODIN won't recognize my device when it is in download mode. It will recognize it when I boot up normally, however. Yet, as soon as I boot into download mode, nothing.
Why is this such a pain in the ass for me? I haven't seen anyone have this much trouble.
Click to expand...
Click to collapse
That is a common problem, no worries man.
You need to go into device manager and delete/uninstall the casual/Samsung driver. Look under android development, then droid style, a sticky thread which shows you to delete driver. When you do that, that should do the trick for you!
Thank you bigmike35, so much. Everything you said worked.
To anyone else with this problem, try installing a 4.3 rom first before the mJ9. I wasted hours and hours by not doing this.
beans3660 said:
Thank you bigmike35, so much. Everything you said worked.
To anyone else with this problem, try installing a 4.3 rom first before the mJ9. I wasted hours and hours by not doing this.
Click to expand...
Click to collapse
Can you post a Link to this 4.3 Rom? or even the Rom name? thanks
I've searched the forums and haven't found a solution to my problem. I have rooted S4 MK2 and wanted to put Gummy ROM on it, only finding out after I had installed TWRP that this wouldn't be possible. No big deal, but now, I can't get away from the stupid downloading screen for TWRP. No longer do I get the screen before it warning about tinkering with your operating system, and once it's stuck on the screen, getting the phone to boot properly sometimes takes a while, and a lot of foul language. I've tried several things to bypass/delete/overwrite TWRP, to no avail. ODIN doesn't work for me, tried several versions, ROM Manager and CWM doesn't work, when I try to boot into CWM mode it goes to downloading screen of TWRP. I finally gave up, decided to nuke it from space and do a factory reset... which took me straight to the damnedable downloading screen! This tells me I will probably be unable to update or use any ASOP ROMs that I might run into, because once on the downloading screen, nothing works, the phone isn't recognized by my computer, two different versions of ODIN failed to get its attention, unable to to load .pit or .tar files... I'm at wits end folks, and haven't found a solution in any other threads on xda, or the net in general, any help and suggestions would be much appreciated. I've not used ADB before, but if need be, I'll learn if there's a fix going that route.
roshane said:
I've searched the forums and haven't found a solution to my problem. I have rooted S4 MK2 and wanted to put Gummy ROM on it, only finding out after I had installed TWRP that this wouldn't be possible. No big deal, but now, I can't get away from the stupid downloading screen for TWRP. No longer do I get the screen before it warning about tinkering with your operating system, and once it's stuck on the screen, getting the phone to boot properly sometimes takes a while, and a lot of foul language. I've tried several things to bypass/delete/overwrite TWRP, to no avail. ODIN doesn't work for me, tried several versions, ROM Manager and CWM doesn't work, when I try to boot into CWM mode it goes to downloading screen of TWRP. I finally gave up, decided to nuke it from space and do a factory reset... which took me straight to the damnedable downloading screen! This tells me I will probably be unable to update or use any ASOP ROMs that I might run into, because once on the downloading screen, nothing works, the phone isn't recognized by my computer, two different versions of ODIN failed to get its attention, unable to to load .pit or .tar files... I'm at wits end folks, and haven't found a solution in any other threads on xda, or the net in general, any help and suggestions would be much appreciated. I've not used ADB before, but if need be, I'll learn if there's a fix going that route.
Click to expand...
Click to collapse
Does Odin "see" your phone? If so, what build are you trying to install?
I know the damage is done, but a little reading before hand would have let you know that with MK2 you can't install a custom recovery. Only Safestrap works with compatible Touchwiz 4.3 Roms
Edit: Maybe this thread will help. http://forum.xda-developers.com/showthread.php?t=2578209
Edit #2: My apologies. Just re-read your post and I see you said, more than once, that Odin isn't seeing your phone. I'm afraid I won't be any help. Good luck.
Odin sees the phone, but fails at all attempts to install anything. .pit, .tar etc. I originally wanted to install Gummy but now I know that won't ever work, then I just tried to install stock .tar file and it also fails.
roshane said:
I've searched the forums and haven't found a solution to my problem. I have rooted S4 MK2 and wanted to put Gummy ROM on it, only finding out after I had installed TWRP that this wouldn't be possible. No big deal, but now, I can't get away from the stupid downloading screen for TWRP. No longer do I get the screen before it warning about tinkering with your operating system, and once it's stuck on the screen, getting the phone to boot properly sometimes takes a while, and a lot of foul language. I've tried several things to bypass/delete/overwrite TWRP, to no avail. ODIN doesn't work for me, tried several versions, ROM Manager and CWM doesn't work, when I try to boot into CWM mode it goes to downloading screen of TWRP. I finally gave up, decided to nuke it from space and do a factory reset... which took me straight to the damnedable downloading screen! This tells me I will probably be unable to update or use any ASOP ROMs that I might run into, because once on the downloading screen, nothing works, the phone isn't recognized by my computer, two different versions of ODIN failed to get its attention, unable to to load .pit or .tar files... I'm at wits end folks, and haven't found a solution in any other threads on xda, or the net in general, any help and suggestions would be much appreciated. I've not used ADB before, but if need be, I'll learn if there's a fix going that route.
Click to expand...
Click to collapse
If you had taken 5 minutes of time to research...you wouldn't have bricked your phone...Countless threads on this very thing.
Sent from my SCH-I545 using XDA Premium 4 mobile app
roshane said:
Odin sees the phone, but fails at all attempts to install anything. .pit, .tar etc. I originally wanted to install Gummy but now I know that won't ever work, then I just tried to install stock .tar file and it also fails.
Click to expand...
Click to collapse
What exactly are you trying to install with Odin?
no bricking, just, let's say a small pebble.
riker147 said:
What exactly are you trying to install with Odin?
Click to expand...
Click to collapse
My most recent attempt was SCH-I545.pit, didn't work... I also tried Philz_Touch, gummy, and one other ROM which, of course didn't work, now I know why the roms didn't, but no sure why the .pit file won't work. All I really want to do now is remove all traces of TWRP. My phone isn't bricked, totally usable, it just won't be able to be updated or customized until I get rid of TWRP
roshane said:
My most recent attempt was SCH-I545.pit, didn't work... I also tried Philz_Touch, gummy, and one other ROM which, of course didn't work, now I know why the roms didn't, but no sure why the .pit file won't work. All I really want to do now is remove all traces of TWRP. My phone isn't bricked, totally usable, it just won't be able to be updated or customized until I get rid of TWRP
Click to expand...
Click to collapse
It looks to me like your only option is to Odin back to stock MK2. Did you check out the link I gave you in my first post?
riker147 said:
It looks to me like your only option is to Odin back to stock MK2. Did you check out the link I gave you in my first post?
Click to expand...
Click to collapse
I'm reading over it now, considering doing the full wipe. Now that I know custom ROMS are going to be limited to ASOP I don't mind going stock and unrooted. I really appreciate your help
roshane said:
I'm reading over it now, considering doing the full wipe. Now that I know custom ROMS are going to be limited to ASOP I don't mind going stock and unrooted. I really appreciate your help
Click to expand...
Click to collapse
If you get it straightened out I would recommend reading this thread after. http://forum.xda-developers.com/showthread.php?t=2606501
Let me know how you make out. Good luck.
From reading this I think you're confusing TWRP with Odin. TWRP doesnt have a downloading screen, but Odin does and thats exactly the screen you want to be on to flash a stock Odin tar. You will need to flash a full stock tar. And if you respond saying it didnt work please include the Odin error log.
Sent from my SCH-I545 using XDA Premium 4 mobile app
riker147 said:
If you get it straightened out I would recommend reading this thread after. http://forum.xda-developers.com/showthread.php?t=2606501
Let me know how you make out. Good luck.
Click to expand...
Click to collapse
no luck so far, got the full wipe downloaded, put everything into Odin, and in the Odin message box it says setupconnection.. not real sure what to do...
roshane said:
no luck so far, got the full wipe downloaded, put everything into Odin, and in the Odin message box it says setupconnection.. not real sure what to do...
Click to expand...
Click to collapse
You making sure you have the proper USB drivers as well as a good USB cable?
Also like surge said its kind of confusing I think you're confusing Odin with twrp as well at times.
So now your trying to load which file from within Odin???
Sent from my SCH-I545 using Tapatalk
Mistertac said:
You making sure you have the proper USB drivers as well as a good USB cable?
Also like surge said its kind of confusing I think you're confusing Odin with twrp as well at times.
So now your trying to load which file from within Odin???
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Got everything working, I'm all stock and all systems are go. Thank you very much for your kind help. I'm going to now patiently wait for the official 4.4 update to arrive and otherwise leave my phone stock.
I went to upgrade to the new hyperdrive since they sent me the ota. Phone has been acting weird so I was going to do a complete wipe. I took my sd card out which my son took and lost on me and OI can find anywhere. I had another card so d/l new hyperdrive onto other card. I went to wipe cache and install new rom. phone wiped data and now wouldnt install new rom. I dont remember all the build I was on on the phone but I had Hyperdrive 16 before I started this if that helps at all. I am stuck on samsung custom boot screen. I can get into odin recovery and tried recovery but keeps failing. can I get some help I need my phone i have to go to work soon. Thanks
ive tried the rootjunky video with both no wipe and full wipe neither worked. odin failed.
FlipFlop425 said:
ive tried the rootjunky video with both no wipe and full wipe neither worked. odin failed.
Click to expand...
Click to collapse
What files are you trying to flash? Did you use Safestrap to install RLS16?
Sent from my NCC-1701 using Tapatalk.
i had downloaded the new update for hyper drive. Right now my biggest probelm is I cannot get past the splash screen. I can get into download mode though so can we try to figure out how to unbrick me first. Download mode is the only thing I can seem to get into right now
FlipFlop425 said:
i had downloaded the new update for hyper drive. Right now my biggest probelm is I cannot get past the splash screen. I can get into download mode though so can we try to figure out how to unbrick me first. Download mode is the only thing I can seem to get into right now
Click to expand...
Click to collapse
That's why I need to know if you used Safestrap as your recovery. It's very likely you're trying to flash the wrong file with Odin.
If you had Safestrap your build wasn't MDK. If you didn't need Safestrap then your build was MDK.
So I'll ask again, what file are you trying to flash, with Odin, that keeps failing?
riker147 said:
That's why I need to know if you used Safestrap as your recovery. It's very likely you're trying to flash the wrong file with Odin.
If you had Safestrap your build wasn't MDK. If you didn't need Safestrap then your build was MDK.
So I'll ask again, what file are you trying to flash, with Odin, that keeps failing?
Click to expand...
Click to collapse
I used to have to use safestrap. I was trying to flash the mdk file from rootjunky's video on unbricking your phone
FlipFlop425 said:
I used to have to use safestrap. I was trying to flash the mdk file from rootjunky's video on unbricking your phone
Click to expand...
Click to collapse
NO!!! You cannot flash the MDK file, you cannot downgrade the S4! Always ends badly, go to the general section and grab the NC5 full-wipe tar and flash with ODIN.
npjohnson said:
NO!!! You cannot flash the MDK file, you cannot downgrade the S4! Always ends badly, go to the general section and grab the NC5 full-wipe tar and flash with ODIN.
Click to expand...
Click to collapse
I have tried that from SUrge1223. That did not work for me. I cannot get in to my phone to re root it. Is that the right file the one from him?
FlipFlop425 said:
I have tried that from SUrge1223. That did not work for me. I cannot get in to my phone to re root it. Is that the right file the one from him?
Click to expand...
Click to collapse
From here http://forum.xda-developers.com/showthread.php?t=2735172. I would choose the "Full Wipe" version. Make sure you have a good download. Check MD5. Make sure you follow the directions for Odin. If you verify all of that, and it still doesn't work, I'm afraid I won't be any more help. Someone with more knowledge than I have will have to step in. Good luck.
riker147 said:
From here http://forum.xda-developers.com/showthread.php?t=2735172. I would choose the "Full Wipe" version. Make sure you have a good download. Check MD5. Make sure you follow the directions for Odin. If you verify all of that, and it still doesn't work, I'm afraid I won't be any more help. Someone with more knowledge than I have will have to step in. Good luck.
Click to expand...
Click to collapse
I can vouch for the full Version. Saved my bacon.
You have to boot the phone into a special mode that will allow ODIN to funtion
Turn off the SGS4 and boot it into Download/Odin Mode: press and hold the Volume Down, Home and Power buttons simultaneously for a couple of seconds till you see a warning screen. Then press Volume Upkey to enter Download Mode.
I got it!!! Found my Samsung cable and all went well. TY for ALL the help!
FlipFlop425 said:
I got it!!! Found my Samsung cable and all went well. TY for ALL the help!
Click to expand...
Click to collapse
Yeah, it is a really good feeling when that ODIN starts to run like it means it. Nothing beats that first boot up!
I have a S4 i545 for Verizon. It was on 4.2.2 rooted and I upgraded using Fireflash with I545_OC1_Stock_DeOdexed_ROMwNK4_BL.zip. Everything seemed fine so I was using Titanium back up to remove the bloatware and then my battery died. When I charged it and booted up it got to the Verizon screen and hung there. I reset and tried several more times. I tried to use odin and flash a stock 4.2.2 ROM SCH-I545_VZW_1_20140330160240_yni63xq6zh and I also tried a 4.4.2 rom. Odin gave a an error and failed. I then tried going into the boot loader and flash the I545_OC1_Stock_DeOdexed_ROMwNK4_BL.zip also. Not sure if this was foolish or not but when I booted up I got to a black screen and there was a voice talking, maybe some sort of app that was running, but I couldn't do anything.
Right now when I turn on the phone it says firmware upgrade encountered an issue. Please select recovery mode in kies and try again. I tried connecting it to my computer and opening kies but it doesn't find it. If anyone can point me in the right direction on how to unbrick my S4 I would appreciate it. I know I screwed up.
as long as you can access ODIN you can unbrick. since your on 4.4.2 get the original rom and install. re root and install your rom of choice. from there if you have a previous backup in titanium you can restore
Sent from my LG-D415 using Tapatalk
I was on 4.2.2. I tried downloading the original ROM for this but it didn't work in Odin.
Problem is I can't get into download mode now, or recovery mode even. It's just at that screen I mentioned above. So Odin isn't recognizing my phone.
thats outside my knowledge base. sorry. good luck
Sent from my LG-D415 using Tapatalk
bump up
dr0832 said:
Problem is I can't get into download mode now, or recovery mode even. It's just at that screen I mentioned above. So Odin isn't recognizing my phone.
Click to expand...
Click to collapse
so if you hold down VOL- and power it doesn't go into download mode?
It won't be recognized in Odin until you get back to download mode. - in Odin then you'd want to flash the PIT file and the ROM you need.
The only other way to fix would be to get ahold of a copy of Verizon's Software Upgrade Assistant/Software Recovery Assistant, which looks like someone has uploaded here:
http://forum.xda-developers.com/showthread.php?t=2469615
The Software Recovery Assistant should fix it if nothing else does, I have used it before.
No when I turn it on it goes straight to the screen I mention with a yellow triangle and it does the same if I hold all the buttons down like you normally would to get in recovery.
I assume a battery pull didn't help. Since you have MDK, it MIGHT be worth it to get the JTAG dongle, which will boot the phone into download mode. It is about 3 bucks.
I tried installing in windows xp, windows 7 and windows 8 with no luck. I clicked the exe and it does nothing. I then tried installing on a MAC. It installed but when I went to run it the software opened for 1 second and then close with an error software closed unexpectedly. The I updated the software on the MAC and the software opened but the second I plugged in the phone it gave the same error. The MAC did find the phone though but windows did not.
bump
dr0832 said:
bump
Click to expand...
Click to collapse
Just plug the phone (on that screen) into your PC and see if it shows up in Odin.
If not, pull the battery, and hold the volume down and power buttons as you put the battery back in. Then choose Continue.
Did you read my post? I have done that. My phone is hard bricked. I can't get into recovery mode and therefore I can't get into download mode so therefore odin won't find my phone.
dr0832 said:
Did you read my post? I have done that. My phone is hard bricked. I can't get into recovery mode and therefore I can't get into download mode so therefore odin won't find my phone.
Click to expand...
Click to collapse
Which ROM did you flash, link?
Ahhh. The linked version of the Verizon Software Upgrade Assistant doesn't work. Sorry about that.
I just pulled the .iso from my S4 and posted it up, try this one: https://www.androidfilehost.com/?fid=24052804347780563
Per npjohnson advice I was able to get the phone into download mode. I misread your post at first so sorry about that. Now I need to figure out how to fix this. I flashed Lollipop originally so does that mean I can't actually go back to 4.2.2 using a stock ROM? Can someone point me to a ROM I should try to flash since the so called stock ROM's I have tried are failing in Odin.
I tried flashing this one:
http://stockroms.net/file/GalaxyS4/SCH-i545/VRUAMDK_NoWipe.tar.zip
It came from here:
http://galaxys4root.com/galaxy-s4-stock-firmware/
As for the Verizon assistant that was just posted it does not install just like the other. I click it and the screen flashed and then it does nothing.
dr0832 said:
Per npjohnson advice I was able to get the phone into download mode. I misread your post at first so sorry about that. Now I need to figure out how to fix this. I flashed Lollipop originally so does that mean I can't actually go back to 4.2.2 using a stock ROM? Can someone point me to a ROM I should try to flash since the so called stock ROM's I have tried are failing in Odin.
I tried flashing this one:
http://stockroms.net/file/GalaxyS4/SCH-i545/VRUAMDK_NoWipe.tar.zip
It came from here:
http://galaxys4root.com/galaxy-s4-stock-firmware/
As for the Verizon assistant that was just posted it does not install just like the other. I click it and the screen flashed and then it does nothing.
Click to expand...
Click to collapse
What lollipop did you flash originally? OTA?
I was rooted and then I flashed I545_OC1_Stock_DeOdexed_ROMwNK4_BL which I think is android 5.0.1. I used flashfire.
This was the thread I followed:
http://forum.xda-developers.com/gal...-to-update-to-i545oc1-5-0-1-keeproot-t3096558
Did the battery die on you? I think this is where you need the debrick image....
dr0832 said:
I was rooted and then I flashed I545_OC1_Stock_DeOdexed_ROMwNK4_BL which I think is android 5.0.1. I used flashfire.
This was the thread I followed:
http://forum.xda-developers.com/gal...-to-update-to-i545oc1-5-0-1-keeproot-t3096558
Click to expand...
Click to collapse
Probably should try the full factory image linked here: http://forum.xda-developers.com/gal...pment/odin-i545vrugoc1-factory-image-t3160125
That will put you on 5.0.1 OC1 including bootloader. You'll then root with Kingroot, use Super-sume to replace Kingroot with SuperSu and then you can use the NON-MDK ROM with FlashFire. (odex, or deodex if you want to use xposed modules.