Related
i cant boot my huawei u8180 into recovery
i rooted it by super one click
when i tried to flash recovery with rom manager premium it restarts then freeze in boot screen
tried to reset my phone from settings ,privacy it also reboot but freeze on boot
i dont know wt to do
PLZ HELP ME WITH THIS ISSUE
plz any one tell me anything i can do with this problem
i cant even reset my phone
plz reply
thanks guys , i solved my problem alone ,, and insalled cyanogenmod 7.2
everything is ok now
how do you solved your problem with huawei u8180? i have the same isue.
Sorry to bump an old thread
I'm having the exact same problem.
Rooted the 8180 with SuperOneClick, installed Rom Manager, from Rom Manager installed CWM 8160 version with sucess, and whenever trying to boot into recovery mod the phone just hangs while showing the hourglass icon.
I tried reflashing the CWM and it still hangs
Im still running the stock firmware/rom
Can you share how you solved this problem?
Hi, I had a similar issue and did a reboot in to the CWM by holding power, volume up and the "search button" (?) the right one any way. Then did a wipe/factory reset.
Norpan70 said:
Hi, I had a similar issue and did a reboot in to the CWM by holding power, volume up and the "search button" (?) the right one any way. Then did a wipe/factory reset.
Click to expand...
Click to collapse
So you could only boot into CWM by pressing power+volume+search? The regular way (power+volume) would lock up like it does to me, is that it?
Anyway I tried your key combination and it still freezes...
Codeman666 said:
Sorry to bump an old thread
I'm having the exact same problem.
Rooted the 8180 with SuperOneClick, installed Rom Manager, from Rom Manager installed CWM 8160 version with sucess, and whenever trying to boot into recovery mod the phone just hangs while showing the hourglass icon.
I tried reflashing the CWM and it still hangs
Im still running the stock firmware/rom
Can you share how you solved this problem?
Click to expand...
Click to collapse
Bug with rom manager, you should try flashing atleast 3 times and then try and go into recovery, happened to me also, just flash again through rom amanager.
Maeur1 said:
Bug with rom manager, you should try flashing atleast 3 times and then try and go into recovery, happened to me also, just flash again through rom amanager.
Click to expand...
Click to collapse
I already flashed about 5 times and still freezes
Hi,as for the fastboot instructions - I've found this to be a great help in getting adb and fastboot to work on my Win7 x64 installs,so you might want to give it a try. Also,I'm gonna upload in a bit the earlier recovery + recovery manager (if you want to try that before you play around with adb/fastboot) to flash it to your device + the device drivers.
Edit - The link for the file - http://ubuntuone.com/14mi7lUkJelsrNBr4z5Uy2 - 12.5 MB - contains the older recovery (you can still try to flash the newer one first if you want), 2 different driver packs and the aforementioned recovery manager.
bk109 said:
Hi,as for the fastboot instructions - I've found this to be a great help in getting adb and fastboot to work on my Win7 x64 installs,so you might want to give it a try. Also,I'm gonna upload in a bit the earlier recovery + recovery manager (if you want to try that before you play around with adb/fastboot) to flash it to your device + the device drivers.
Edit - The link for the file - http://ubuntuone.com/14mi7lUkJelsrNBr4z5Uy2 - 12.5 MB - contains the older recovery (you can still try to flash the newer one first if you want), 2 different driver packs and the aforementioned recovery manager.
Click to expand...
Click to collapse
Thank you! Im trying recovery manager as I type this, I find it curious it says "Currently installed recovery: unrecognized"
As for the driver, I already had it installed from when I rooted the phone.
EDIT: So I installed the up to date recovery (recovery-clockwork-5.0.2.8-u8160) with Recovery Manager, still unrecognized and still freezes after booting into recovery.
Installed the one you supplied (ClockworkMod-u8160-v0.1) and got the exact same results, unrecognized and freeze
Codeman666 said:
Thank you! Im trying recovery manager as I type this, I find it curious it says "Currently installed recovery: unrecognized"
As for the driver, I already had it installed from when I rooted the phone.
EDIT: So I installed the up to date recovery (recovery-clockwork-5.0.2.8-u8160) with Recovery Manager, still unrecognized and still freezes after booting into recovery.
Installed the one you supplied (ClockworkMod-u8160-v0.1) and got the exact same results, unrecognized and freeze
Click to expand...
Click to collapse
In that case you might want to try the doomsday option - fastboot (not really,hell - it's actually rather useful + if you follow that website you also get adb up and working too). As for the 'unrecognized' alert,I remember getting it too once upon a time,but I have to admit - I haven't used the app myself since when I made the jump from the stock 2.2.1 ROM to a custom froyo build,so I can't recall for the moment what I did to fix that error
bk109 said:
In that case you might want to try the doomsday option - fastboot (not really,hell - it's actually rather useful + if you follow that website you also get adb up and working too). As for the 'unrecognized' alert,I remember getting it too once upon a time,but I have to admit - I haven't used the app myself since when I made the jump from the stock 2.2.1 ROM to a custom froyo build,so I can't recall for the moment what I did to fix that error
Click to expand...
Click to collapse
Will do. Besides the fastboot recovery command what else do I need to do from the phone side?
Does fastboot display any feedback or log about the flashing/installation?
Codeman666 said:
Will do. Besides the fastboot recovery command what else do I need to do from the phone side?
Does fastboot display any feedback or log about the flashing/installation?
Click to expand...
Click to collapse
Nothing specific -you just have to reboot in fastboot mode (just restart the phone while pressing Power and Volume Down. Windows should chirp and install the drivers automagically - afterwards just use that command discussed earlier and it should flash your recovery without any additional prompts (it should only print out a confirmation of a successful flash) and you should have the CWM ready to go
Edit: I put my device into fastboot mode on a clean Windows install (a Win8 Consumer Preview) and it did autodetect and install the relevant driver without restarting itself
No luck... Now it's driver issues
When booting the phone with either the vol up or down pressed and pluging in the USB my PC isn't recognizing the driver, I used both drivers you sent me.
Initially it's detected as Android 1.0 device, upon fetching the drivers it gets named "Android Sooner Single ADB Interface".
As I refresh device manager it goes back to Android 1.0 with an exclamation mark.
I think it's a driver signature issue, I'll try again in a couple of hours in a different PC
edit:in debug mode I have no driver issues and I can even detect my phone with ADB
Finally!
Tried it in another computer, auto downloaded some ASUS adb driver and installed fine.
Flashed latest CWM recovery with fastboot and now I'm able to boot into CWM!
Thank you so much for your help!
Sry for bumping.
So, i had the same trouble with the drivers. But i just downloaded HiSuite directly from the Huawei Site and these fix my problem with drivers to use adb without troubles . Hope this help someone.
BTW, Thanks bk109!
It did helped me thx man
Sent from my U8180 using xda app-developers app
First of all this is my first thread here in XDA and I searched as far as I can to find an answer but didn't got it that's why I'm posting here.
I have a [Gen2] ZTE v9 Tab which had 2.2 as the stock OS which I managed to get upgraded to 2.3 using modcore everything was gr8. I pushed my luck little further and tried to install Android ICS in order to do that I did a TPT using image file and after doing that my tab is bricked.
It's not booting into the OS I tried to get into the FTM mode but that doesn't work now only thing that work's is the ADB I tried the recovery methods that can be done through ADB but it says "sh:/sbin/recovery xxxx" missing.
What I think is that the system partition was recreated and Is there any way that I can get the system files on to the tab using ADB or a way to copy entire directory on to the tab using the ADB.
You're the only people I know who can help me this forum has done wonders for me.
Please help me .. Thanks in advance.
Update : Got the system to boot to FTM but when I try to flash it the software fails and gives a error "Failed to Get aprmg x x x " some thing like that if there's a way to skip this I'll be able to get my tab back to working condition please can any one help.
ZTE
sandmaan said:
First of all this is my first thread here in XDA and I searched as far as I can to find an answer but didn't got it that's why I'm posting here.
I have a [Gen2] ZTE v9 Tab which had 2.2 as the stock OS which I managed to get upgraded to 2.3 using modcore everything was gr8. I pushed my luck little further and tried to install Android ICS in order to do that I did a TPT using image file and after doing that my tab is bricked.
It's not booting into the OS I tried to get into the FTM mode but that doesn't work now only thing that work's is the ADB I tried the recovery methods that can be done through ADB but it says "sh:/sbin/recovery xxxx" missing.
What I think is that the system partition was recreated and Is there any way that I can get the system files on to the tab using ADB or a way to copy entire directory on to the tab using the ADB.
You're the only people I know who can help me this forum has done wonders for me.
Please help me .. Thanks in advance.
Update : Got the system to boot to FTM but when I try to flash it the software fails and gives a error "Failed to Get aprmg x x x " some thing like that if there's a way to skip this I'll be able to get my tab back to working condition please can any one help.
Click to expand...
Click to collapse
Hello Sandmaan, can you please help me? I'm in the same situation as you except i did a wrong rom update (one from blade - i have ZTE v9 light). Now i can't even start it no FTM no virbation no android screen no response except that red led light witch when i plug in the charger keeps beeping fast. Have any ideea how to get into FTM mode? The button combination doesn't work.
Thanks
http://forum.xda-developers.com/showthread.php?t=1706918
FTM Mode
jiffer1991 said:
http://forum.xda-developers.com/showthread.php?t=1706918
Click to expand...
Click to collapse
OK, back in FTM mode.
Found the fastboot exe linked to here http://dottech.org/t...-android-phone/ (does not seem to be included in the sdk nowadays ref. http://developer.and.../sdk/index.html, and adb would not recognise the Racer - could have messed around with installing the sdk drivers but didn't get round to this, e.g. , http://www.addictive...all-it-android/).
Booting the Racer with vol- down did not work (fastboot couldn't see it), but booting with vol+ and fastboot found a fastboot device.
The command to reflash:
>fastboot.exe flash recovery recovery.img
(image downloaded from http://raceroms.co.u....php/stock-roms)
Useful reference page here http://wiki.cyanogen...m/wiki/Fastboot
My phone it's bricked, I rooted my w100 yesterday and to celebrate I installed the ifont app from the market, but at the third change didn't reboot any more, I have searched for the rom but seems to be very new... Neither the recovery or something help me out, I was looking for the preloader or somethin ... I'm just desperate.
Some help will be very appreciated!
How did you root it?
Uri997 said:
How did you root it?
Click to expand...
Click to collapse
its pretty easy, you can use the motochopper tool, instal the mtk6589 driver and connect your phone to the pc, then hit the runme.bat file and follow the instructions, very easy!
Here you have a very simple and good post that surely will help you.
http://forum.xda-developers.com/showthread.php?t=2247537
Best wishes!
josepbennet said:
My phone it's bricked, I rooted my w100 yesterday and to celebrate I installed the ifont app from the market, but at the third change didn't reboot any more, I have searched for the rom but seems to be very new... Neither the recovery or something help me out, I was looking for the preloader or somethin ... I'm just desperate.
Some help will be very appreciated!
Click to expand...
Click to collapse
here u go:
kokuo81 said:
Here you have it
THL W100 rooted ROM:
https://mega.co.nz/#!SEYFlbxT!LYK3Rw231-M6eA0O75ccZRgEQ7JLvBrZDm_MDqdLvBU
(credits to josemdg90 on htcmania)
Originally taken from:
http://4pda.ru/forum/index.php?showtopic=462368&st=200
Hope it helps
Cheers
kok
Click to expand...
Click to collapse
josepbennet said:
My phone it's bricked, I rooted my w100 yesterday and to celebrate I installed the ifont app from the market, but at the third change didn't reboot any more, I have searched for the rom but seems to be very new... Neither the recovery or something help me out, I was looking for the preloader or somethin ... I'm just desperate.
Some help will be very appreciated!
Click to expand...
Click to collapse
You must be the absolute first to brick your w100.
Did you succeed installation of kok's rom ?
I bricked my phone too...
First I installed a partitioning app to my device, my plan was to merge the two inner partition into one.
Then i become frozen boot.
After that I tried reflash with sp Flash Tool, I made a "format" and a reflash, and now the W100 is in boot loop.
When I try to do a factory reset in recovery it says: "Mount /data error"
Could you guys help me please? What the hell can I do now...?
I've succesfully unbricked my THL W100
josepbennet said:
My phone it's bricked, I rooted my w100 yesterday and to celebrate I installed the ifont app from the market, but at the third change didn't reboot any more, I have searched for the rom but seems to be very new... Neither the recovery or something help me out, I was looking for the preloader or somethin ... I'm just desperate.
Some help will be very appreciated!
Click to expand...
Click to collapse
salaksalak said:
I bricked my phone too...
First I installed a partitioning app to my device, my plan was to merge the two inner partition into one.
Then i become frozen boot.
After that I tried reflash with sp Flash Tool, I made a "format" and a reflash, and now the W100 is in boot loop.
When I try to do a factory reset in recovery it says: "Mount /data error"
Could you guys help me please? What the hell can I do now...?
Click to expand...
Click to collapse
Hi everyone,
Few days ago, I've also bricked my THL W100... My mistake was one of the most stupid one: instead of click on Download in SP Flash Tool, I click on Format and accept the operation without reading the warning message. Result: first boot I got the white THL logo in bootloop, and second attempt give me only a black screen with only a faint red light on the front LED.
I've read many threads about unbricking MediaTek based devices, made many manipulations without success. I've even disassemble my device in search of a secret 'test point' dedicated to full memory flash.
Unbricking THL W100 in far more simple than all this. You'll need one of the 'THL W100 original ROM'. I've choosen the May 16th edition (130516) on NeedRom (http://www.needrom.com/phone-roms/thl/thl-w100/). And off course, you'll need SP Flash Tool, also available on NeedRom.
Unpack the Rom files, launch SP Flash Tool, and load Scatter file, and press 'Download' button
The 'deep memory flash mode' require activation of the 'MTK DA USB VCOM' driver. To activate this mode, you'll have to:
1) disconnect the battery
2) keep the Vol+ down and connect the USB cable (without battery)
These are the main operations...
For my problem, I've tried to flash:
- the whole Rom except Preloader... but it fails,
- the whole Rom including Preloader... but it fails too,
The solution came by using first 'Format' function, and select 'Format whole flash' option, before flashing Rom as previously described. But, I used this format function with classic flash connection, e.g.: connecting the THL W100 to the PC via USB cable without the battery, and inserting the battery (and no use of Vol+ button, off course).
Be carreful: before trying this kamikaze procedure, try to unbrick your device by simply flashing the Rom without/with Preloader.
hi
Who have THL W100 firmware upgrade, please send a link to me, thank you
Lindsay02 said:
hi
Who have THL W100 firmware upgrade, please send a link to me, thank you
Click to expand...
Click to collapse
here it is : http://www.needrom.com/mobile/thl-w100-official/
pigot said:
The solution came by using first 'Format' function, and select 'Format whole flash' option, before flashing Rom as previously described. But, I used this format function with classic flash connection, e.g.: connecting the THL W100 to the PC via USB cable without the battery, and inserting the battery (and no use of Vol+ button, off course).
Click to expand...
Click to collapse
Afraid I don't understand...
The format is what you had done to brick it in the first place isn't it ?
So you needed to format again using 'Format whole flash' option ?
Is that correct ?
ch-vox said:
here it is : http://www.needrom.com/mobile/thl-w100-official/
Click to expand...
Click to collapse
Thank you
Lindsay02 said:
Thank you
Click to expand...
Click to collapse
you're welcome
intrax said:
Afraid I don't understand...
The format is what you had done to brick it in the first place isn't it ?
So you needed to format again using 'Format whole flash' option ?
Is that correct ?
Click to expand...
Click to collapse
True: I've bricked my device by using 'Format' with the option 'Format whole flash except Bootloader". At the first reboot, I got a THL white logo bootloop. After second reboot, nothing but a black screen and a faint red light from the front Led. I've tried 'Download' and 'Upgrade' SP Flash Tool functions to reinstall ROM(s) with or without 'Preloader' partition: got lots of sybilin error messages, and correct download.upgrade achievements, but my device remains bricked.
I've also tried 'Format whole flash except Bootloader' function + immediate Rom download, but it fails... until I use 'Format whole flash' function (USB cable connected + battery insertion) and immediately after whole ROM (130529) 'Download' (no battery inserted + Vol+ pushed + USB cable). First boot took about 4 minutes... but everithing works after that.
Need help please
please help me !!! I THINK MY DEVICE IS BRICK I NEED THE OFFICIAL ROM
please help me i BOUGHT THL W300 befor 5 days ago ...i try to update the recovery but the divice is died and black screen it is no work and no start up no charging . now i want for your help
it is new divce but no support here in saudi arabia..
when I conict the computer there is no logo no show any thing gust black screen gust I heard some sound when I plunge with computer . I try to flashing ROM(thl w100) it is show message error 4023 in flashtools.
now I need file to flashing ROM also file for bootloader.or any help to start up agin
iam sorry my english languge is not ok
I can't do it!!
pigot said:
True: I've bricked my device by using 'Format' with the option 'Format whole flash except Bootloader". At the first reboot, I got a THL white logo bootloop. After second reboot, nothing but a black screen and a faint red light from the front Led. I've tried 'Download' and 'Upgrade' SP Flash Tool functions to reinstall ROM(s) with or without 'Preloader' partition: got lots of sybilin error messages, and correct download.upgrade achievements, but my device remains bricked.
I've also tried 'Format whole flash except Bootloader' function + immediate Rom download, but it fails... until I use 'Format whole flash' function (USB cable connected + battery insertion) and immediately after whole ROM (130529) 'Download' (no battery inserted + Vol+ pushed + USB cable). First boot took about 4 minutes... but everithing works after that.
Click to expand...
Click to collapse
Hi everyone!
When I got my w100 I tried to put an other ROM with sp flash tool, flash tool process completed perfectly but when I tried to boot my phone, the pone it started up but the screen only showed white lines. I even heard the sound of the boot.. But screen remained black with white and other colours lines.
I tried to flash it again with diferents many ROMs..W100_130912_backup_131001-214504, W100_130504_ForFlashtoolFromReadBack_130605-170952, ThL.W100.130701.JBV2.HD.EN.COM.8P32_MT6589.
Even though the process got complete, the perfomance of the phone was the same as I said.
As I got tired of flash it once and again, then I followed your advice, so I did a "Format whole flash", I got it, but after I tried the "Download" I always get the same error, after first red bar it's 100% sp flash tool always shows the same message:
BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM Failed!
HINT:
Please check your load matches to your target which is to be downloaded.
Now when I tried to do whole format or download, I got the same error.
I tried by vol+ pushed + cable usb and cable usb conected without battery then I put de battery. But still the same result.
I'm starting to think that can be a motherboard damage or samthing!!
Can anyone help me please!!?
I found the solution!!
I did it by using Windows xp!!! Then the error message disappeared!! And i've got my phone working!!
---------- Post added at 07:38 PM ---------- Previous post was at 07:02 PM ----------
I found the solution!!
I did it by using Windows xp!!! Then the error message disappeared!! And i've got my phone working!!
pigot said:
True: I've bricked my device by using 'Format' with the option 'Format whole flash except Bootloader". At the first reboot, I got a THL white logo bootloop. After second reboot, nothing but a black screen and a faint red light from the front Led. I've tried 'Download' and 'Upgrade' SP Flash Tool functions to reinstall ROM(s) with or without 'Preloader' partition: got lots of sybilin error messages, and correct download.upgrade achievements, but my device remains bricked.
I've also tried 'Format whole flash except Bootloader' function + immediate Rom download, but it fails... until I use 'Format whole flash' function (USB cable connected + battery insertion) and immediately after whole ROM (130529) 'Download' (no battery inserted + Vol+ pushed + USB cable). First boot took about 4 minutes... but everithing works after that.
Click to expand...
Click to collapse
Great! That work for my friend phone after a lot of trying , Thank you.
Sent from my GT-I9000 using Tapatalk
Brom error: S_ft_enable_dram_fail (4032)
Hello,
my THL W100 arrived yesterday and i was immediatelly interested in some custom rom so i began flashing it not knowing properly, what i was doing, so firstly i ended up in boot loop, then completely bricked with device refusing to boot (black screen).
I tried recovering using SP Flash Tool these builds, but nothing worked for me:
thl.w100.130529.jbv2.hd.en.com.8p32_mt65
ThL.W100.130701.JBV2.HD.EN.COM.8P32_MT65
ThL.W100.130802.JBV2_.HD_.EN_.COM_.8P32_MT65892
W100_130504_ForFlashtoolFromReadBack_130605-170952
I also tried using different versions of SP Flash Tool (.119, .139 .150), but all showed error BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
As said here before, tried on Win XP and Win 7 64bit and it showed same error.
So then being despred for several hours I actually dig up a lot on internet and found up some information:
1) There are apparently some hardware revisions, according to beginning of serial code:
BFYSG94W - Rev. 1
BFYSG9410 - Rev. 2
But my phone has CFYSGM4W - maybe its a new Rev. 3?
2) Based on many other mtk6589 phones having the same problem, you should look for firmware released by date of manufacture. It should be written somewhere, but I didn't find any information on device no package, so I decide to look for latest.
3) The phone shows up in device manager as "alcatel RNDIS" under network cards, I had to manually update the driver selecting "Preloader for Flash SP.Flash" .ini file manually from a disk. It may tell that the device may not work or something, but don't worry, reconnecting it shows up as MTK USB Port under COM and LPT ports and it should be fine.
4) I also had to disassemble to device and short LCOLO test pin to ground - here is the original post with image http://forum.xda-developers.com/showthread.php?p=44208574#post44208574 I soldered a single wire of hdd ribbon cable to lcolo, the other side being wrapper around USB cable. I flashed without battery, shorted all the time. The Flash Tool immediatelly discovered the device, when the lcolo pin is shorted, then when progress bar turned from red to violet the MTK USB Port device changed to 'MediaTek Preloader USB VCOM Port' so the preloader was owerwrited and phone successfully flashed back to factory state.
(before you lose your warranty try connecting usb > inserting battery or connecting usb without battery + holding volume up, it does practically the same job)
5) There are lot of stock roms here - http://www.needrom.com/phone-roms/thl/thl-w100/
So finally the version that worked for me was: ThL.W100.130912.JBV2.QHD.EN.COM.V01.8P32-kol
I even managed to get CWM working, (used same scatter, checked only recovery and doble clicked and selected recovery-cwm-6037-w100-130912).
To make it easier for people having the same problem I put up the things that worked for me and uploaded it, includes:
ThL.W100.130912.JBV2.QHD.EN.COM.V01.8P32-kol
SP_Flash_Tool_v3.1316.0.150
recovery-cwm-6037-w100-130912
and drivers for ADB and Preloader for Flash with SP.Flash
http://www.4shared.com/archive/FjP0asvJ/thl_w100_rev3.html
I hope you will find my first post useful, sorry for my bad english
Regards,
Umakarton
I also received a THL W100 with a CFYSGM4W serial today.
I flashed a different stock rom to it and it refused to boot (just showed some black and white lines). Google led me here and your package worked great . I tried a few different roms but the one you provided seems to be the only one to work.
Thanks
Snippo said:
I also received a THL W100 with a CFYSGM4W serial today.
I flashed a different stock rom to it and it refused to boot (just showed some black and white lines). Google led me here and your package worked great . I tried a few different roms but the one you provided seems to be the only one to work.
Thanks
Click to expand...
Click to collapse
I am glad it worked for you too, I don't found any complete info in one place so i decided to write this essay. It feels nice to help other people! :good:
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Sorry to hear about your bricked phone. I can't help specifically as I don't have a Lenovo, but having a search around XDA there seems to have been some success reported in the following thread:
http://forum.xda-developers.com/showthread.php?t=2597590
See this post - http://forum.xda-developers.com/showpost.php?p=52013378&postcount=412
Another post in that thread suggests:
Turn off the phone --> Run minimal ABD and fastboot as admin--> just write the command for recovery install (don't hit enter yet)--> press volume + and volume - button and connect the phone to pc via usb--> now hit enter and voila. Your phone will boot in recovery.
Click to expand...
Click to collapse
Good luck!
anyone?
f4780y said:
Sorry to hear about your bricked phone. I can't help specifically as I don't have a Lenovo, but having a search around XDA there seems to have been some success reported in the following thread:
http://forum.xda-developers.com/showthread.php?t=2597590
See this post - http://forum.xda-developers.com/showpost.php?p=52013378&postcount=412
Another post in that thread suggests:
Good luck!
Click to expand...
Click to collapse
i tried this aldready, but my phone is locked bootloder so that method is no help. Thank you for your support anyway.
hientran41 said:
i tried this aldready, but my phone is locked bootloder so that method is no help. Thank you for your support anyway.
Click to expand...
Click to collapse
OK, but did you look at the second link there, to the specific post in that thread? It suggests a process for locked bootloader, which is why I thought it might help...
Anyhoo, I hope you manage to get it fixed somehow!
Is anybody have the droidboot.img file from the VibeZ K910 dualsim, pls upload it for me. i cannot find it anywhere.
I look into the second link as well. that method for user have a working phone but locked bootloader and want to downgrade.
Ah, OK. Sorry I couldn't help.
u fix your phone?
hientran41 said:
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Click to expand...
Click to collapse
hi do u fix your phone?
Geguniukas said:
hi do u fix your phone?
Click to expand...
Click to collapse
i bricked also
dunno what to do..
---------- Post added at 12:13 AM ---------- Previous post was at 12:13 AM ----------
hientran41 said:
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Click to expand...
Click to collapse
did you fixed the phone?
lenovo k910e 4.2.2 bricked after TWRP for 4.4.2 installation
Hi , this is my first time on the site , so forgive me if ive posted this in the wrong place.
I briked my Lenovo k910e running 4.2.2 rom with google apps purchased off Aliexpress.
What i did was run the flashrec.exe file for TWRP , but not until too late did i realise it was for 4.4.2 instead of 4.2.2.
Now i cannot boot the phone , TWRP was successfully installed and operational , but after about 20 reboots TWRP flash screen is stuck on the TeamWin logo and not accessable.
Ive tried mostl sugestions on this site and others without luck.
I can get the phone recognised with fastboot only after these commands ;
cd downloads
cd fastboot
adb devices
and it seems i may be able to push files to my device.
Is there a working link to the k910 OEM rom k910_ss_s_2_040_0109_131226 someone could direct me to.
All the links i have found so far are corrupted. Is there a way of repairing the TWRP recovery i have in the phone now.
Am I correct in assuming I have to install the OEM factory 4.2.2 ROM to wipe TWRP and istal Lenovo recovery ?.
Any help would be so appreciated. Thanks
Solution ( k910 bricked )
Ok here is the solution even if your device ( k910 dual sim ) is completely bricked as was mine.
I was stuck in Lenovo logo with no success in finding right and working drivers ( windows 7 64x ) and i was not able to to get in recovery official ...everything was just - somehow - deleted...
I had locked bootloader **** and was not be able to flash cmw in working mode ****
There was nothing for me that could recover my phone even if the "hard" way with QPST or miflash etc
So....after 3 days....find this solution and hope this will help you because it is soooooooooo easy finally!
Steps:
1) Download lenovo driver ( i think it is useless in fact but ok....just run it you dont have anything more to loose )
https://www.dropbox.com/s/frbpz16udrefoit/LenovoUsbDriver_autorun_1.0.112.exe?dl=0
2a) Download and install Minimal adb
https://www.dropbox.com/s/uvngsu4vz4hvsky/minimal_adb_fastboot_v1.1.3_setup.exe?dl=0
So now you have to use the right recovery image ( this file has to be inside minimal adb folder )....so here it is:
https://www.dropbox.com/s/ge05m1fe8n4qgb1/recovery.img?dl=0
2b)
Download this ROM ( this worked for me - with other i did try i did get an error )
http://www.needrom.com/download/lenovo-k910-vibeui-2-0/
prefer the last updated version ( 1501 )
Put this rom in the same ADB folder and renale zip in VIBE1411.ZIP ( in order to be easier later )
3) Turn off the device open Adb and write : fastboot boot recovery.img ( to have it ready )
4) Push volume + $ volume - at the same time and AFTER connect with usb to your pc - At the time the device will vibrate HIT ENTER in ADB
This will flash the recovery and after 1 minute device will open in a recovery screen with an adb update option ***
SELECT THIS adb update OPTION !
Your device kow it is ready to flash the new rom ! ( you will realize that everything is right from many usb beeps you will hear )
5)In adb console write : adb sideload VIBE1411.ZIP
This will take a little ....after that your device will reboot ! Dont panic if for a few minutes it will stuck in lenovo logo....
IT IS NORMAL AND YOU HAVE TO WAIT!
Hope this will help you.....please feel free to tell me if this worked for you.
C u
Same thing happens to my lenovo vibe z k910
buzzbuzz1 said:
Hi , this is my first time on the site , so forgive me if ive posted this in the wrong place.
I briked my Lenovo k910e running 4.2.2 rom with google apps purchased off Aliexpress.
What i did was run the flashrec.exe file for TWRP , but not until too late did i realise it was for 4.4.2 instead of 4.2.2.
Now i cannot boot the phone , TWRP was successfully installed and operational , but after about 20 reboots TWRP flash screen is stuck on the TeamWin logo and not accessable.
Ive tried mostl sugestions on this site and others without luck.
I can get the phone recognised with fastboot only after these commands ;
cd downloads
cd fastboot
adb devices
and it seems i may be able to push files to my device.
Is there a working link to the k910 OEM rom k910_ss_s_2_040_0109_131226 someone could direct me to.
All the links i have found so far are corrupted. Is there a way of repairing the TWRP recovery i have in the phone now.
Am I correct in assuming I have to install the OEM factory 4.2.2 ROM to wipe TWRP and istal Lenovo recovery ?.
Any help would be so appreciated. Thanks
Click to expand...
Click to collapse
After running twrp recovery it operates 3-4 times but now it flashes on twrp screen and screen goes blank and again flashes . I am unable to on it and as it shows only light and lenovo logo after that blank screen . Please help me in this. Its only detecting in adb recovery not any other mode.
lenove vibe Z k910 locked and stuck in logo
hello all
I ve done every word and many other tutorials but still the problem the same:
adb devices give just nothing
but fastboot devices gives the device
the driver is installed correctly detected in devices of the computer
here is the response for :fastboot boot recovery.img:
~/Desktop/lenovo]$ fastboot boot recovery.img (master✱)
< waiting for device >
downloading 'boot.img'...
OKAY [ 0.536s]
booting...
FAILED (remote: Locked)
finished. total time: 0.538s
thanks for everyone to help
Boot into recovery under bricked condition
Today I bricked K910 after reinstalling GMS apk.
The phone hanged at boot logo.
Nothing can be from here.
I decided to take this risk.
I removed the back cover and disconnected the battery terminal.
After that I plugged back the terminal.
Several tries by power button and volume down to get into the recovery mode. All failed.
Each time it hanged at boot logo.
I have to redo the battery terminal unplug sequence again.
This is correct method to get into recovery mode.
Press power button and volume down till the Lenovo logo appears.
Move the power button finger to the position of the " Home " of the touchscreen position.
Hold till the recovery menu appears. Choose factory reset to erase the phone.
There was two lit small icon below. Make your choice.
The phone will be erased by reset.
Reboot after the process.
I solved my phone bricked problem.
Hope the method will solve your problem.
Good day to all K910 users.
my vibe z cannot access the recovery mode (PWR + VLM DOWN), it only vibrate. If turn on only stuck at Logo. Please help .
Hi...
I try to root my FL02 (ALCATEL FLASH PLUS 2) every thing goes perfect and i get ORANGE STATUS but at the last step when trying to flash the rom with TWRP it could not read the SD card and system folder isn't abel to wipe so i try to repeat steps again.
first flasing in the video done and mobile restarting. no logo on screen and it doesnt boot and cannt go in boot mode or fastboot mode.
it connect and disconnect with PC but i still can connect it to flashing programme and i can send flash from PC but it doesnt boot and nothing appear on the screen.
any help....
Phone : FLASH PLUS 2
N D1M N7KE 03 TJZ
ANDROID 6.0
I follow this video to root
youtube.com/watch?v=d8zPGPJ_uZY
EFAYSAL said:
Hi...
I try to root my FL02 (ALCATEL FLASH PLUS 2) every thing goes perfect and i get ORANGE STATUS but at the last step when trying to flash the rom with TWRP it could not read the SD card and system folder isn't abel to wipe so i try to repeat steps again.
first flasing in the video done and mobile restarting. no logo on screen and it doesnt boot and cannt go in boot mode or fastboot mode.
it connect and disconnect with PC but i still can connect it to flashing programme and i can send flash from PC but it doesnt boot and nothing appear on the screen.
any help....
Phone : FLASH PLUS 2
N D1M N7KE 03 TJZ
ANDROID 6.0
I follow this video to root
youtube.com/watch?v=d8zPGPJ_uZY
Click to expand...
Click to collapse
Ok, tell me to can help you;
Do you have TWRP installed?
Do you unlock bootloader succesfully?
In which modes you can enter? fastboot, recovery, download (do detects SPFlash Tool?)
SubwayChamp said:
Ok, tell me to can help you;
Do you have TWRP installed?
Do you unlock bootloader succesfully?
In which modes you can enter? fastboot, recovery, download (do detects SPFlash Tool?)
Click to expand...
Click to collapse
Thank you SubwayChamp for help.
No , TWRP is not installed now .
Yes, I think bootloader has been unlocked. It is done with Orange status.
I think it is in download mode. it detects SPFlash.
EFAYSAL said:
Thank you SubwayChamp for help.
No , TWRP is not installed now .
Yes, I think bootloader has been unlocked. It is done with Orange status.
I think it is in download mode. it detects SPFlash.
Click to expand...
Click to collapse
Ok, I guess that your device is actually in bootloop and don´t booting.
Tutorial that you followed has many steps and don´t need to do all this to just root device and it contains some files like lk.bin that you can´t be sure that should be for your device.
Some users use this file (lk.bin) of an unlocked device and think that flashng in other device then get unlock it but no need, your device can be unlock it just follow some commands in fastboot mode.
Now you can do the next;
Try to flash again your rom stock (I guess that you don´t have a backup), if for some reason your official tool doesn´t work then use only some images like boot, system and userdata with the scatter.txt to flash them through SP Flash Tool.
Here a link to TWRP https://youtu.be/6vj_BY6xJdA, you can root it with supersu v2.78 0r v2.82 and here some files that can be usefull too https://drive.google.com/uc?id=0BwJgeCYTpnEHNlg2VUlieHFTYVU&export=download
Update steps that you are following to can assist. What extension has your rom and if it is recogniced for SP Flash Tool. I didn´t ask you if you can enter to fastboot mode and if you can then you can know if your bootloader is unlocked typing fastboot oem info
Most info that you give and some screenie will help to understand better
Unfortunatly, it can not enter to fastboot or recovery mode. Those files in replay didn't work and i dont have a backup. I try to flash recovery.img, system.img and preloader_shine_plus.bin . All done but it still black screen and does not boot. But now it connect to Pc without disconect .
I cant add link or images to my post.
EFAYSAL said:
Unfortunatly, it can not enter to fastboot or recovery mode. Those files in replay didn't work and i dont have a backup. I try to flash recovery.img, system.img and preloader_shine_plus.bin . All done but it still black screen and does not boot. But now it connect to Pc without disconect .
I cant add link or images to my post.
Click to expand...
Click to collapse
Gmail didn´t warn myself about your post. Did you solve it?
You said that flashed recovery, system and preloader but how, through SPFlashTool?, if yes, are you sure that this tool recogniced your device?
You forgot to flash boot.img too.
Other way to try; flash only preloader.bin and then try flashing boot, system and userdata that are the three most important partitions to can boot.
Like last resort you can do a Format all + flash but only like last.
SubwayChamp said:
Gmail didn´t warn myself about your post. Did you solve it?
You said that flashed recovery, system and preloader but how, through SPFlashTool?, if yes, are you sure that this tool recogniced your device?
You forgot to flash boot.img too.
Other way to try; flash only preloader.bin and then try flashing boot, system and userdata that are the three most important partitions to can boot.
Like last resort you can do a Format all + flash but only like last.
Click to expand...
Click to collapse
first of all thank you for your help. I was busy last week .
Yes it was with SPFlash and it is show MT6775 when mobile connect . but if i try flashing boot it gives an erorr and cant flashing.
I think i have a wrong boot file.
I miss userdata file.
Do you know where can i download necessary files for this model?
I apologize for delaying. It is time for school examin
EFAYSAL said:
first of all thank you for your help. I was busy last week .
Yes it was with SPFlash and it is show MT6775 when mobile connect . but if i try flashing boot it gives an erorr and cant flashing.
I think i have a wrong boot file.
I miss userdata file.
Do you know where can i download necessary files for this model?
I apologize for delaying. It is time for school examin
Click to expand...
Click to collapse
I´m not sure if you are connecting correctly your device at right time and form to can flash it properly. Every device has more or less a specific way to do it. My last alcatel it was connected just with device power off and after to tap on download, but in other device Blu Dash was connected pressing just vol_up and my last mt6757 Bluboo had to press both vol up and down at time to connect to pc and after to tap on download option. To have sure that is well done increase volume in your pc, you will hear a first sound that is cause pc is recognicing but then you have to hear a second sound that is when SPFlashTool is recognicing device and you will see a red line in down side of the tool window, release button inmediately and let tool to work.
This is a good rom for your device according the author is optimized https://droid1311.blogspot.com/2017/08/alcatel-fl02-aka-flash-plus-2-via.html and this is the link directly if you have troubles with pop-up-adds https://drive.google.com/file/d/0BwAGh1drb91SeDZwV1VXbXpjQWM/view
Also you can try with other versions of SP Flash Tool, most stable maybe should be v5,1628 https://androidmtk.com/smart-phone-flash-tool leth me know how you go
If I understant, the status bar has to be red then I will release the mobile button and click download in SPFlashTool.
SPFlashTool 5.1628:
I try all the way with and without pressing any button but no luck . And when it work finishing with error.
SPFlashTool 5.1628:
I try all the way to get that mode but nothing works. So I try to click download button then conect the phone by random buttons and every time i get red color , yellow , green ,purple , yellow (for many times 100%)
then i get this error:
ERR: STATUS-SEC-IMG-TYPE-MISMATCH (0xC002002A)
EFAYSAL said:
If I understant, the status bar has to be red then I will release the mobile button and click download in SPFlashTool.
I try all the way to get that mode but nothing works. So I try to click download button then conect the pkone by random buttons and every time i get red color , yellow , green ,purple , yellow (for many times 100%)
then i get this error:
ERR: STATUS-SEC-IMG-TYPE-MISMATCH (0xC002002A)
Click to expand...
Click to collapse
There is a part that is not variable in the way to use this tool, ever you have to tap on download before to connect device and is recommendable too connect cable usb to pc (not yet to device); from here is when the button that you have to press can vary but like I said you before in my last mt6757 (a very similar to yours) works pressing both vol at same time to connect terminal cable to device and now you will see a red line (could be violet-ish)
Try before just flashing only preloader file to recreate some partitions and then do other flash for the other files.
Of course you have to be sure that all drivers are installed correctly cause this tool needs to put your device in download mode (a special level) and also keep it in this state so find VCOM drivers for Alcatel and adb/fastboot installer and try to uninstalling some older drivers that you don´t use and many times we keep in our pcs and for a short data transmission can helo that all the rom move it in same folder where SPFlashTool is allocated.
After updating drivers and trying all the possibilities buttons the red line doesnt appear.
EFAYSAL said:
After updating drivers and trying all the possibilities buttons the red line doesnt appear.
Click to expand...
Click to collapse
Ok, here there are somethings that we need to know
- First of all don´t forget to charge your battery, after many attempts could consume a lot.
- Your device is recogniced in fastboot mode? mtk has two variables ways to enter to, pressing both vol + pwr till an options menu appear, then you have to select, and the other method most known is vol down+ pwr to go diirectly
- In what android version are you, 6.0?
- What is the exact variant of your device, you can know maybe seeing in the box, this rom is for 5095K version 6.0 MM
- Did you try to flash just preloader, only this file?
If SPFlashTool don´t give signals of recognicing device is probably that your device is not now totally power off, try pressing pwr by 7 seconds, then try to flash again combining both vol with pwr button
Upload some screenshot about the process
SubwayChamp said:
Ok, here there are somethings that we need to know
- First of all don´t forget to charge your battery, after many attempts could consume a lot.
- Your device is recogniced in fastboot mode? mtk has two variables ways to enter to, pressing both vol + pwr till an options menu appear, then you have to select, and the other method most known is vol down+ pwr to go diirectly
Click to expand...
Click to collapse
Which option mode should appear? Screen is always black (off) all that i have on the phone is the LED.
I try more than 4 different drivers for Alcatel Flash Plus 2 (vcom & cdc) but no sound from SPFlash to prove that it recognise the phone. Sounds just release and keep relrease from Windows 10.
SubwayChamp said:
- In what android version are you, 6.0?
Click to expand...
Click to collapse
Yes, last time it was 6.0 before the root
SubwayChamp said:
- What is the exact variant of your device, you can know maybe seeing in the box, this rom is for 5095K version 6.0 MM
Click to expand...
Click to collapse
Unfortunatly, I dont know . There is nothing on the box or manuel.
that is what i found on the box :
FL02
Venus gold H-B
FL02-2HLCEU2
- PWR+VOL(+) : reset the phone
SubwayChamp said:
- Did you try to flash just preloader, only this file?
Click to expand...
Click to collapse
It is done. all that i have to do is to tab on Download and then connect the phone and I dont need to press any button.
SubwayChamp said:
If SPFlashTool don´t give signals of recognicing device is probably that your device is not now totally power off, try pressing pwr by 7 seconds, then try to flash again combining both vol with pwr button
Upload some screenshot about the process
Click to expand...
Click to collapse
I did that but it is same.
Note:
Success fash always done without pressing any button on the phone. and I try it with and without buttons sometimes it is fail when I press a button and otherwise it work.
I have formated whole fash.
EFAYSAL said:
Which option mode should appear? Screen is always black (off) all that i have on the phone is the LED.
I try more than 4 different drivers for Alcatel Flash Plus 2 (vcom & cdc) but no sound from SPFlash to prove that it recognise the phone. Sounds just release and keep relrease from Windows 10.
Yes, last time it was 6.0 before the root
Unfortunatly, I dont know . There is nothing on the box or manuel.
that is what i found on the box :
FL02
Venus gold H-B
FL02-2HLCEU2
- PWR+VOL(+) : reset the phone
It is done. all that i have to do is to tab on Download and then connect the phone and I dont need to press any button.
I did that but it is same.
Note:
Success fash always done without pressing any button on the phone. and I try it with and without buttons sometimes it is fail when I press a button and otherwise it work.
I have formated whole fash.
Click to expand...
Click to collapse
You need to try two different ways to flash files and restore your device.
First method: fastboot mode
You need to get device enter to fastboot in order to flash some files like system, boot and userdata, then there are two main methods to do it:
- Pressing pwr + vol down
- And I mentioned that sometimes work pressing both volume button + pwr and a menu have to appear to can select an option to enter to (fastboot mode), in some devices this method is not working but you have to try several times attempting to.
Second method: SPFlashTool
You have to ever press first of all Download box and connect terminal cable to pc and the buttons thhat you need to press at time to connec cable usb to your device may vary, sometimes vol down, sometimes both vol but never pwr button; if pc recognice then you have to release all buttone an let it pc continue the flash process.
If SPFlashTool recognice device first flash only preloader file and select now lk.bin too. Flash only these two files and after do again a new flash with the rest of the files, Why you need to do this? your partitions are corrupted and you need to restore them with these files in order to can flash all another files.
Before all of this charge your battery, if you have a cover removable then extract it some minutes and put it again.
Also I read that for this model it´s used this tool instead of SPFlash Tool https://androidmtk.com/download-sugar-mtk-sp-flash-tool (inside the zip you will find a password to start the tool) but I´m not sure what kind of rom it needs, you have to connect your device to begin the process, you will find in product models section in the tool this variant for your device "FL02"
Try first the other tool and then this and let me know how you go, mtk devices are almost unbrickeable so it´s just to find the appropriate way to return it to the life.
Hi again!
It was along time,I know . But I tried to know why I can’t return my phone back to life.
I have searched all possible websites for rom of this model and I have formatted my pc and installed win7 with all necessary drivers.
I can’t found any rom for it but now I can flash all the necessary files for boot they flashing and running smoothly but the mobile can’t boot up.
I try to use that app in your replay. It recognizes the device but stuck after that and keep looking for rom without any chance to download it.
I think I have a wrong rom files. I can’t find any other reason but this.
I will write again all information about my phone:
It is called Alcatel Flash Plus 2
I bought it from AliExpress and it came from Indonesia as I remember (not sure)
On battery wrote:
FL02
TCL communication Ltd
FL02-2HLCEU2
EFAYSAL said:
Hi again!
It was along time,I know . But I tried to know why I can’t return my phone back to life.
I have searched all possible websites for rom of this model and I have formatted my pc and installed win7 with all necessary drivers.
I can’t found any rom for it but now I can flash all the necessary files for boot they flashing and running smoothly but the mobile can’t boot up.
I try to use that app in your replay. It recognizes the device but stuck after that and keep looking for rom without any chance to download it.
I think I have a wrong rom files. I can’t find any other reason but this.
I will write again all information about my phone:
It is called Alcatel Flash Plus 2
I bought it from AliExpress and it came from Indonesia as I remember (not sure)
On battery wrote:
FL02
TCL communication Ltd
FL02-2HLCEU2
Click to expand...
Click to collapse
Yes, so many time
When device is booting, it stays in bootlogo or goes atleast to bootanimation?
I understand that you tried with Sugar tool with no lucky.
Did you try again through SP Flash tool? trying to flash in a first attempt only preloader file and in a second attempt the other files? (try with 2 or 3 versions and see the differences).
Is there some custom development, recovery, roms for your device?
I think that now you are flashing correct rom through fastboot but like you did before bad/wrong flashings your bootloader is refusing to boot to system. Flash through fastboot all the partitions that you can follow the syntax for every one of them by i.e. typing fastboot flash cache cache.img and so on one by one (some of them are unflashable through this method)
SubwayChamp said:
Yes, so many time
When device is booting, it stays in bootlogo or goes atleast to bootanimation?
Click to expand...
Click to collapse
Unfortunately, nothing happens. The screen is black no bootlogo appears or anything that shows that device is booting. It is looking like nothing has happened.
SubwayChamp said:
I understand that you tried with Sugar tool with no lucky.
Click to expand...
Click to collapse
Yes. After recognizing it keeps trying to download data but no luck.
SubwayChamp said:
Did you try again through SP Flash tool? trying to flash in a first attempt only preloader file and in a second attempt the other files? (try with 2 or 3 versions and see the differences).
Click to expand...
Click to collapse
I know it is disappointing!. I try this but no luck.
SubwayChamp said:
Is there some custom development, recovery, roms for your device?
Click to expand...
Click to collapse
Unfortunately no, all that I found are TWRP recovery Roms. I don’t know if I can use them with SPFLASH Tool.
SubwayChamp said:
I think that now you are flashing correct rom through fastboot but like you did before bad/wrong flashings your bootloader is refusing to boot to system. Flash through fastboot all the partitions that you can follow the syntax for every one of them by i.e. typing fastboot flash cache cache.img and so on one by one (some of them are unflashable through this method)
Click to expand...
Click to collapse
I began lose hope that the mobile could work again. I live in Sweden and no technicians kan help me to fix this issue. I should do it by myself.
If you kan help me to do that step by step. Please write to me what I have to do from the beginning step by step until I reach the end. To be sure I'm doing it by the right way.
Thanks
EFAYSAL said:
Unfortunately, nothing happens. The screen is black no bootlogo appears or anything that shows that device is booting. It is looking like nothing has happened.
Yes. After recognizing it keeps trying to download data but no luck.
I know it is disappointing!. I try this but no luck.
Unfortunately no, all that I found are TWRP recovery Roms. I don’t know if I can use them with SPFLASH Tool.
I began lose hope that the mobile could work again. I live in Sweden and no technicians kan help me to fix this issue. I should do it by myself.
If you kan help me to do that step by step. Please write to me what I have to do from the beginning step by step until I reach the end. To be sure I'm doing it by the right way.
Thanks
Click to expand...
Click to collapse
I´ll tell you some ideas with no any specific order that you can try or see if works.
Really very strange that display stays in black, you told me that flashing files through fastboot is working but doesn´t appear not even bootlogo, connect to pc as it is and see how pc recognices in devices manager and my pc if appears like a determined drive d/e/f so it looks that some bad flashing burn your kernel and this case is similar to when a Samsung device need to use jtag method to revive, if in your country no-one knows about Alcatel devices this could be a similar case to what I´m saying then it could be a clue for a technician. I tell you this cause many time ago when I flashed by error a Samsung s4 and only this method revived my device.
Try this, flash your stock recovery only through SPFlash tool and flash after through Alcatel Download tool your stock rom cause some firmwares need to detect stock recovery first to can flash other partitions.
At this stage don´t you have stock recovery, no? so you can try to format data cause sometimes when bootloader is altered then avoid to boot and formatting data can solve this.
If this recovery twrp is for your device you can try flashing through SPFlash tool, you have to put recovery.img and scatter-txt in a same folder. then if succesfull format data, system, wipe cache and dalvik and maybe later try to port some custom rom would be a way to solve this.
To flash any partition through fastboot this is the syntax, just follow one by one any of the files that are in your rom folder so just follow these, if some of then can´t be flashed don´t worry then it´s not flashable:
fastboot flash boot bot.img
fastboot flash cache cache.img
fastboot flash lk lk.bin
and so on till the end
...But after try this if you didn´t get boot to recovery and obviously you can´t delete data nor system then delete first the next partitions trough fastboot typing:
fastboot erase system
fastboot erase cache
fastboot erase userdata
fastboot erase boot
Try all this and let us see how it goes
I have flashed TWRP Rom but it is same , no luck.
On sugar tool I got this message after success flashing via SPFLASH tool.
I tried all possible buttons to connect device to PC on Fastboot mode but the PC cannot send data to my device.
To be in Fastboot mode , the device has to boot while pressing on (PWR & VOL+) but my device can’t boot.
EFAYSAL said:
I have flashed TWRP Rom but it is same , no luck.
On sugar tool I got this message after success flashing via SPFLASH tool.
View attachment 4518365
I tried all possible buttons to connect device to PC on Fastboot mode but the PC cannot send data to my device.
To be in Fastboot mode , the device has to boot while pressing on (PWR & VOL+) but my device can’t boot.
Click to expand...
Click to collapse
I see that Sugar tool detects your device like rooted and refuses to flash anything, compare imei number which is in the box, I hope that it couldn´t be changed.
Don´t tell me simply no luck, what it says in SPFlash tool when you tried to flash TWRP and I guess that you put scatter-txt and twrp renamed recovery.img simply in the same folder. Just to be clear, to can flash with this tool your device it has to be off not needed fastboot for this. (provide some screenie)
Other combination of keys to enter to fastboot to flash some partitions when something is missing is, try these three ways:
- Pressing only vol down and at same time connecting to charger (connect first one terminal of cable to your device and then to the charger)
- Pressing the three buttons till a menu appears (you must to release inmediately all)
- Pressing vol up + pwr till a menu appears (you must to release pwr button inmediately) then choose fastboot
In the post 4 I provided a link from Google Drive, in this zip there are 8 items;
- From the item 2 use this version of SP Flash tool, put the four files in a folder and flash them
- In the item 3 you will find some scripts for fastboot, maybe they´re working better and also you have here a subfolder with twrp image.
- And if you get sucessfully install twrp in the item 7 there is a backup with some files to restore from this recovery.
Try one by one and update the info, I hope that your motherboard is not damaged.