I just bought a galaxy mega [L600] and it was soft bricked [ Firmware upgrade was interrupted] Well i've flashed around and managed to get it back to semi functional and activsted.
However I have no service at all.
I've seen that Kies should be able to completely fix this for me, but Kies asks for a "serial" that I cannot give. I've tried every dec nd hex i can possibly try and nothing.
I've tried flashing modems..
At this point Im lost.
Can someone please help?
bump
Related
Ok guys I'm super new to this and have been searching all day. I got a Nexus S with Videotron here in Canada. It is the I9020T I made the mistake of trying to root it which brought me to the google logo loop.
I then panicked and followed the unrooting process to fix the phone: http://forum.xda-developers.com/showthread.php?t=1088494
When I ran Odin with the package supplied the Radio failed.
The phone will now boot up, however, the signal bar is grey'd out with an x which I'm assuming is because I have no radio.
I should also mention my phone is 3g and the odin package is 4g which I'm assuming is one of the reasons it did not work.
I would just like to know what to do to bring the whole thing back to stock. I have tried the bootloader recovery but it just gives me the android guy with a triangle and an exclamation point inside.
I have also tried factory reset and another odin package which just hangs.
Could someone please tell me exactly what to do as this is a work phone, and I'm in a lot of trouble if I can't fix it.
I beg you please help before work tomorrow!!
Thanks guys,
Chris
Well, today I installed new ROM, and I don't realy understand in those things, so I did as was in intstructions, few minutes ago, I turned it off, tried to turn it on and its not turning again!
What to do? I am sure it is bircked, and if my parents will know they will kill me!!
I bought the phone 3 weeks ago (( please help
I could get it to work with Odin.. I plugged the USB with the phone and ODIN showed yellow thing on it with port working... But I Cant get it in download mode
please help me!
Here are some questions so that we might be able to help you:
-What exact model do you have? 5660 or 5660M (Bell Canada variant)?
-What exactly did you try to flash?
-To get your phone in download mode, did you try the "three button combo"? meaning: volume down, home and power all at the same time.
-Are you sure that whatever you're going to try and flash this time is going to be suitable for your phone?
Good luck,
Darkshado
S5660 GT
ROM
Yes I tried
Well yes
Odin recognizes the phone but I can't get it to download or rescovery mode, it is not even flashing. What should I do? Please help me!! it is urgent, my parents will kill me!!
The screen is black, no downloade mode, no rscovery, i tried all combinations, i plugged usb and the phone and Odin detected it... i guess it is fully bricked
i bought phone few weeks ago ((((((((((((((((( nowi have no phone and i afraid to tell my parents what to do plz help
Does anyone know if a USB jig like those used on the Galaxy S and Nexus S series would work to get his phone in download mode?
Make I should go to the company and maybe they will can fix it? Should I tell my parents tomorow or got solution?
i really typed a big explanation regarding the problem, but i have no F*****G clue how it got erased. am already sad n pissed, well recently i tried to plug in my usb for my Galaxy Tab 7 running Overcome 7 ROM and Kernal 4.00.
but it dint get recognized at all, it hasnt happend before, but now i have tried every possible troubleshooting technique including kies troubleshooting and couple of em off google.
nothing has worked, and lastly i tried to install ChopSuey-v.9.1-SYNERGY_GODMODE-signed Kernal, coz for someone els it worked, but i totally bricked my tab, i used some android based software as odin doesnt know my tab exists, my hardisk is unable to mount and complete the factory reset all tat is failing.
right now no usb connection and my tab doesnt boot, doesnt recignize in download mode either!!!! please someone tell me what to do. i cnt take it to the service centre, am guessing theyll know its rooted and with custom rom thus voiding the warrenty.
it is stuck at the boot screen, and if i switch it off, it doesnt switch off just reboots , ad its stuck.
anybody any help?
Hi all.
I have already posted my problem in this thread which I have read to the end ( [GUIDE] Fix an unflashable or soft bricked I9100G )
but was not able to get any solution so I'm starting a new thread hopefully someone might be able to help me and sorry if I was not suppose to start a new thread.
My problem is as follows and hope that someone can help.
I have downloaded odin mobile and installed it on my S2 I9100 G which previously had CM 10 installed on it and I wanted to flash the official firmware using Odin mobile. I did run it and then the phone prompted me for M5 or Md5 that was detected and should click yes to verify before flashing. I clicked yes then it started verifying and when it was done it rebooted and then was stuck on the (Samsung Galaxy S2 GT-19100G black screen) and did not want to move. I waited for an hour and a half and nothing happened. When I removed the battery (I could not reset or do anything else) and put it back, the phone turned on by itself and stayed still on the starting screen (Samsung Galaxy S2 GT-19100G black screen)
Now I'm not being able to put it in recovery nor download mode.
Can any one help and anyone knows if the jtag dongle can actually force it to go to download mode even at this stage
Thanks in advance for any suggestion
Ok thank you guys. I think I was able to fix it and revive my phone.
go to service centre they solve your problem
Sent from my GT-I9100G using xda premium
Make sure you got the right M.O kernel (I9100G).
Sent from the little guy
Hey guys
Today i was trying to downgrade my s2 from 4.1.2 to 2.3.6 by Odin 1.85 program.
In the middle of the process i plugged off the phone accidentally.
So after that i turned off the phone and tried to power it on back but the phone did't boot anything even the os or the recovery or download mode, I got only a black screen.
And the tutorial i was following http://www.youtube.com/watch?v=ModCPTUbIjA
So i hope if can anyone help me.
I would be very thankful
Service centre. Or if you want to try a jig, try one (very unlikely to work though).