Stock Rooted Rom - AT&T HTC One (M8)

Looking for stock rooted rom for SOFF . Are these stock roms like it , looked in the dev forum only found roms for S0FF. Mine is SOFF..

sguy156 said:
Looking for stock rooted rom for SOFF . Are these stock roms like it , looked in the dev forum only found roms for S0FF. Mine is SOFF..
Click to expand...
Click to collapse
Not clear what you are asking for. The first sentence made it sound like you want a stock ROM in order to run firewater or sunshine (but you don't specify), but then you seem to state you have S-off already. I think you may have made a mistake.
Stock rooted AT&T ROMs are listed on my Index thread (see bottom of CUSTOM ROMs section): http://forum.xda-developers.com/showthread.php?t=2751432
Also, questions of help threads don't belong in General, they belong in the Q&A, Help section. I will notify the mods to move this thread.

Looking for stock ROM which will work on S0FF .. Or I am guessing in order for me to flash stock rom I have to be S-OFF ??

sguy156 said:
Looking for stock ROM which will work on S0FF .. Or I am guessing in order for me to flash stock rom I have to be S-OFF ??
Click to expand...
Click to collapse
No, you don't need s-off to flash any ROMs (although some ROMs may give you broken WiFi or other issues if you firmware is mismatched to it).
Any of the stock ROMs I've indicated on my previous post will do. But firewater doesn't work anymore for most folks, even under the best of circumstances. Plus, the devs have discontinued firewater. So its possible the exploit will no longer work, even if everything is perfect.

Yup that might be issue I might have if I flash rom which needs firmware update which I cannt do as firewater doesn't work to get S0FF to update firmware.

sguy156 said:
Yup that might be issue I might have if I flash rom which needs firmware update which I cannt do as firewater doesn't work to get S0FF to update firmware.
Click to expand...
Click to collapse
If you flashed a ROM and WiFi won't turn on, firmware is almost certainly the issue. Long boot times (like 10+ minutes) with no boot animation is also a known symptom of mismatched firmware. Folks will often think the ROM is not booting at all, since it takes so long (but it eventually will if you let it sit long enough).
You can pay for sunshine s-off, you flash a ROM that goes with your current firmware.

Related

Bog standard un-moded rooted EU ICS 3VO rom available?

Hi guys, I've tried many ICS roms here but unfortunately everyone has bugs and problems...
Is there a bog standard rooted 3VO EU ICS rom here to download without any modifications? Just a plain rooted OTA ICS rom?
Also where can I download old PG86IMG.ZIP radios for the 3VO, radios from gingerbread days? I've noriced a big drop in signal strength and stability with the new radios floating around since ICS came along...
This section is for development. If you had looked, one of the stickys is
[Tutorial - How to revert back to Original ROM for backup or warranty purposes]
Which shows you how to revert. You can then OTA update. Please post in the relevant section next time.
Thanks for the info but you haven't even tried to answer my question.. I know about HTC standard OTA updating....I don't want an un-rooted OTA update.
I'm asking if there is a Bog standard un-moded rooted EU ICS 3VO rom available to download here in XDA?
I'm surprised if there isn't because that's the standard first thing devs release....
There are tens of different moded ICS roms to try in XDA, everyone with individual mods and many bugs... Im looking for a Bog standard un-moded rooted EU ICS 3VO rom
oquestions in development thread are not allowed. REPORTED.
Thanks for that Mr Bavaria goosewalk
iconias said:
Hi guys, I've tried many ICS roms here but unfortunately everyone has bugs and problems...
Is there a bog standard rooted 3VO EU ICS rom here to download without any modifications? Just a plain rooted OTA ICS rom?
Also where can I download old PG86IMG.ZIP radios for the 3VO, radios from gingerbread days? I've noriced a big drop in signal strength and stability with the new radios floating around since ICS came along...
Click to expand...
Click to collapse
1. Wrong section.
2. I will try to answer your question anyway
You can root the OTA ICS rom yourself.
1. Install it
2. Unlock bootloader
3. Install custom recovery
4. Install SU 3.x.x via recovery
Voila, you're rooted.
There is a thread with all stock roms. It also has the RUU for ICS.
The problem you're having in signal strenght is not something I can comply, so I cannot agree with that. I have used all (yes...seriously, I've tried them all ) ICS Roms here and no signal strenght issues whatsoever.
The GB radio's... there is a thread also that has all ROM's , Kernels and firmware's listed. It's a sticky, so easy to find.
Not that I don't want to provide any links, it's just that I am really lazy today
edit: holy crap you guys are fast.
@e3d, thanks for the report
KrewsialNL said:
1. Wrong section.
2. I will try to answer your question anyway
You can root the OTA ICS rom yourself.
1. Install it
2. Unlock bootloader
3. Install custom recovery
4. Install SU 3.x.x via recovery
Voila, you're rooted.
There is a thread with all stock roms. It also has the RUU for ICS.
The problem you're having in signal strenght is not something I can comply, so I cannot agree with that. I have used all (yes...seriously, I've tried them all ) ICS Roms here and no signal strenght issues whatsoever.
The GB radio's... there is a thread also that has all ROM's , Kernels and firmware's listed. It's a sticky, so easy to find.
Not that I don't want to provide any links, it's just that I am really lazy today
edit: holy crap you guys are fast.
@e3d, thanks for the report
Click to expand...
Click to collapse
Great Thanks, real help some useful tips.
Is the RUU for ICS rooted?
I can't keep up with all the different threads here so I'm forced to ask sometimes. That's what forums are for...
e3d certainly has his finger ready on the button....
Why don't you just revert to stock ics, and root your self, ? ? If you have any problems is be happy to do it, create a nand and ul to my drop box
iconias said:
Great Thanks, real help some useful tips.
Is the RUU for ICS rooted?
I can't keep up with all the different threads here so I'm forced to ask sometimes. That's what forums are for...
e3d certainly has his finger ready on the button....
Click to expand...
Click to collapse
No, you need to flash the superuser.zip through recovery.
Also, there is a Q&A forum. Please use it.
gav-collins1983 said:
Why don't you just revert to stock ics, and root your self, ? ? If you have any problems is be happy to do it, create a nand and ul to my drop box
Click to expand...
Click to collapse
Thanks, but I was hoping to just download a rooted stock ICS here in XDA and install it, no such luck it seems.
I dont want to revert back to stock and stock Hboot just to be able to download an htc OTA, I'm on S-OFF
Snowled said:
No, you need to flash the superuser.zip through recovery.
Also, there is a Q&A forum. Please use it.
Click to expand...
Click to collapse
SO it's as easy as pie? I just have to download the RUU stock ICS here in XDA and then flash superuser.zip through recovery...?
I'm downloading RUU​_SHOOTER​_U_ICS​_35_S​_HTC​_Europe​_3.28​.401​.1_Radio​_11.7​... from here
iconias said:
Thanks, but I was hoping to just download a rooted stock ICS here in XDA and install it, no such luck it seems.
I dont want to revert back to stock and stock Hboot just to be able to download an htc OTA, I'm on S-OFF
SO it's as easy as pie? I just have to download the RUU stock ICS here in XDA and then flash superuser.zip through recovery...?
Click to expand...
Click to collapse
Because of leaks, thanks to mdeejay, development was instant so when ruu was released the devs were ahead of the game, and the need for a stock but rooted Rom wasn't really necessary for ics, if you wanted gb its in here somewhere, you could revert to that, then update to ics ota, and then re flash recovery and in root, after unlocking the boot loader
iconias said:
Hi guys, I've tried many ICS roms here but unfortunately everyone has bugs and problems...
Is there a bog standard rooted 3VO EU ICS rom here to download without any modifications? Just a plain rooted OTA ICS rom?
Also where can I download old PG86IMG.ZIP radios for the 3VO, radios from gingerbread days? I've noriced a big drop in signal strength and stability with the new radios floating around since ICS came along...
Click to expand...
Click to collapse
Why do you want to install a stock (non-optimized rom)? when you can install mwakious rom, for me is the best one, no bug whatsoever, very fast and very stable. Just try it.:fingers-crossed:
I've used makios's rom more than others and also in my opinion the best out of all the moded ICS roms.
But it also has some bugs in sense apps, such as sense mail and friends and facebook and wifi connection is effected by these bugs.
Anyway the mwakious thread is the place to talk about that...
I'm still downloading the RUU​_SHOOTER​_U_ICS​_35_S​_HTC​_Europe​_3.28​.401​ .1_Radio​_11.7​...its a slow file server
iconias said:
I've used makios's rom more than others and also in my opinion the best out of all the moded ICS roms.
But it also has some bugs in sense apps, such as sense mail and friends and facebook and wifi connection is effected by these bugs.
Anyway the mwakious thread is the place to talk about that...
I'm still downloading the RUU​_SHOOTER​_U_ICS​_35_S​_HTC​_Europe​_3.28​.401​ .1_Radio​_11.7​...its a slow file server
Click to expand...
Click to collapse
I didnt know that bugs existed on his rom just because i dont use sense mail, friends and i dont have facebook . With wifi i dont have problems. If i was you il better report to mwakious and he will try to solve this problems.:fingers-crossed:
I finished downloading RUU​_SHOOTER​_U_ICS​_35_S​_HTC​_Europe​_3.28​.40 1​ .1_Radio​_11.7​...
Unfortunately I see its an official HTC update, its going to revert everything back to stock including hboot....not what I was looking for
So theres no rooted stock ICS rom anywhere to download..?
iconias said:
I finished downloading RUU​_SHOOTER​_U_ICS​_35_S​_HTC​_Europe​_3.28​.40 1​ .1_Radio​_11.7​...
Unfortunately I see its an official HTC update, its going to revert everything back to stock including hboot....not what I was looking for
So theres no rooted stock ICS rom anywhere to download..?
Click to expand...
Click to collapse
Hi iconias,
I ask for a rooted ICS stock 2 or 3 weeks ago, but unfortunately in this forum nobody know or want create a rooted-deodexed ICS stock.
Try this method: http://forum.xda-developers.com/showthread.php?t=1732984
Let me know if this it can help you! I'm still waiting to use it.
Thanks for that link, it looks like what I was after, a rooted EU ICS zip for flashing normay without having to revert to htc stock and hboot....
I'm very busy the next few days but should have time to try it next week...
iconias said:
Thanks for that link, it looks like what I was after, a rooted EU ICS zip for flashing normay without having to revert to htc stock and hboot....
I'm very busy the next few days but should have time to try it next week...
Click to expand...
Click to collapse
Its' a modified OTA ICS update.
When you'll try it next week, post your result.
Bye

[Q]Jelly Bean on evo 3d ?

Hi,
i have an s-on gsm evo 3d with 4ext recovery installed...Can anyone tell me which jb rom i can flash...n how to do it..Please ! :fingers-crossed:
i tried this but it gets stuck on boot animation (http://forum.xda-developers.com/showthread.php?t=1801647)
Did you check here? http://forum.xda-developers.com/showthread.php?t=1786578. Also your problem maybe that you are s-on and most aosp roms require you to be s-off with a downgraded bootloader to work properly. I am suprised because you have posted in the tutorial for rearranged s-off and did not follow the guides to obtain s-off. Well, in any event. Obtaining s-off is your first priority if you want to run aosp roms on your device.
Jsparta26 said:
Did you check here? http://forum.xda-developers.com/showthread.php?t=1786578. Also your problem maybe that you are s-on and most aosp roms require you to be s-off with a downgraded bootloader to work properly. I am suprised because you have posted in the tutorial for rearranged s-off and did not follow the guides to obtain s-off. Well, in any event. Obtaining s-off is your first priority if you want to run aosp roms on your device.
Click to expand...
Click to collapse
Well thanks for answering :highfive:
Also, Which aosp rom will work ?
P.s i posted in that thread coz i was new to xda then..and wanted thanks by helping people :victory:
As well as the s-on problem the rom you linked to will only boot (for me at least) with the usb cable unplugged.. shrugs, also note first boot takes a fair time, 5 minutes or so.
Still No Luck !!! :crying:
Well, now i installed ubuntuz 0.7.2 jb rom...and it got to android is upgrading ...And it is stuck there tried everything !
Don't panic its going to be ok lol. As I have said before aosp roms do not play nice with s-on devices. I will walk you through this. First thing you will need to do is download an ruu file. Now are you unbranded or branded? If branded you will need to download the ruu for the country and carrier you are on. If not then just use the Europe one. Here's a link with a list of ruu files http://forum.xda-developers.com/showthread.php?t=1208485. Scroll through that and find the appropriate one for you. If there aren't any ruu exe's just google it to find the one appropriate for you depending on if your branded or not. Use the European one if unbranded. Here's a link to help you with getting back to stock http://forum.xda-developers.com/showthread.php?t=1655832. Okay, if you get to.stock here's a link to gaining s-off. Follow method D. Now I just want to say, a lot of users are apparently having crazy bootloops even with s-off. So my suggestion to you is to flash a sense Rom like cool sense for now until the devs can fix these aosp roms.
Jsparta26 said:
Don't panic its going to be ok lol. As I have said before aosp roms do not play nice with s-on devices. I will walk you through this. First thing you will need to do is download an ruu file. Now are you unbranded or branded? If branded you will need to download the ruu for the country and carrier you are on. If not then just use the Europe one. Here's a link with a list of ruu files http://forum.xda-developers.com/showthread.php?t=1208485. Scroll through that and find the appropriate one for you. If there aren't any ruu exe's just google it to find the one appropriate for you depending on if your branded or not. Use the European one if unbranded. Here's a link to help you with getting back to stock http://forum.xda-developers.com/showthread.php?t=1655832. Okay, if you get to.stock here's a link to gaining s-off. Follow method D. Now I just want to say, a lot of users are apparently having crazy bootloops even with s-off. So my suggestion to you is to flash a sense Rom like cool sense for now until the devs can fix these aosp roms.
Click to expand...
Click to collapse
i just restored my nand...thanks anyways ! :good:
invince2 said:
i just restored my nand...thanks anyways ! :good:
Click to expand...
Click to collapse
AOSP ROM's play fine with s-off devices. Use the hboot 1.4 or ENG hboot 1.04, I run two AOSP ROM's as daily drivers.

Stuck at HTC boot splash

I can get back into recovery but ever since I've attempted to flash a costum rom such as Viper or Revolution it gets stuck in the splash screen.
I'm not sure whats going on but I can boot into AOKP. If someone can help me out with the appropriate steps to take to flash one of those roms OR to flash back to stock I'd really appreciate because I've been at this for a couple of hours now and my head is starting to hurt :/
You need to update your firmware to run a Sense 2.22 based ROM: http://forum.xda-developers.com/showpost.php?p=54408500&postcount=9592
From the linked post:
The issues you will see without the new firmware include long boot times with no boot animations and some users on 9.1 reported wifi and bluetooth issues.
redpoint73 said:
You need to update your firmware to run a Sense 2.22 based ROM: http://forum.xda-developers.com/showpost.php?p=54408500&postcount=9592
From the linked post:
The issues you will see without the new firmware include long boot times with no boot animations and some users on 9.1 reported wifi and bluetooth issues.
Click to expand...
Click to collapse
I see you helping a lot people here redpoint so first of all thanks.
I just used the RUU.exe to return to at&t stock software number 1.58.502.1
I've read exactly what you said about being on Sense 2.22 but that's where I'm not sure what to do since AT&T hasn't release 4.4.3 yet and theres nothing for me to update to.
Do I have to S-off to obtain Sense 2.22? And also how difficult is it to S-ON? Again thanks so much.
afrojoc said:
I just used the RUU.exe to return to at&t stock software number 1.58.502.1
Click to expand...
Click to collapse
Kind of did things the hard way, although you are back up and running. Now you will need to unlock the bootloader and install custom recovery again, to get back to where you were.
All you really needed to do was either restore your nandroid (you should always make one before flashing anything) or get a different ROM (Sense 1.xxx base) onto the phone and flash it.
Also, the phone was likely not really "stuck", just taking a REALLY LONG time to boot, like 10 minutes.
afrojoc said:
I've read exactly what you said about being on Sense 2.22 but that's where I'm not sure what to do since AT&T hasn't release 4.4.3 yet and theres nothing for me to update to.
Click to expand...
Click to collapse
The post I linked previously includes the specific firmware package for US users, and a link to detailed instructions. 2.22.1540 is what you want to use, its pulled from the US Dev Edition OTA. While its not the "official AT&T" firmware, the DE is identical to the AT&T version in everything except AT&T branding (band support, etc.) and designed specifically for use on AT&T. Users here (including myself) can confirm it works seamlessly on the AT&T version.
2.22.1540 is also specifically advocated for use on the AT&T version in the following ROM post, along with great instruction (this is personally the one I used). Although you have to download the whole ROM, as the firmware is packed with it:
http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
afrojoc said:
Do I have to S-off to obtain Sense 2.22?
Click to expand...
Click to collapse
To update the firmware as I've described, yes. Reason being, the partitions that need to be updated by the firmware (radio, hboot, etc.) can't be modified without either S-off, or "official" update meant for your version.
The other option is to remain S-on and wait until AT&T releases the OTA. But who knows when that will be . . .
afrojoc said:
And also how difficult is it to S-ON?
Click to expand...
Click to collapse
S-on isn't really necessary. As long as you understand the implications of s-off, its usually better to be s-off. More freedom, and more options to recover if you have issues.
Also, AT&T doesn't care about s-off in terms of warranty service. They only care about physical damage or water damage.
afrojoc said:
Again thanks so much. I see you helping a lot people here redpoint so first of all thanks
Click to expand...
Click to collapse
No problem at all. I've benefited a lot from XDA, and its my way of contributing.

[Q&A] AT&T Stock Backups, Recoveries, OTAs and Radio IMGs

Q&A for AT&T Stock Backups, Recoveries, OTAs and Radio IMGs
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for AT&T Stock Backups, Recoveries, OTAs and Radio IMGs. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
When i resturned to stock. I only flash the stock recovery at rom. And i dont the radio. What radio does? Do i still need to flash it?
Little explanations needed !!!
Hi guys,just joined this HUGE community where you can find almost everything you need for your satisfaction:good: !
But since i`m noobie would appreciate some assistance in explaining how to unlock my M8,and install Android Revolution HD ROM !!!
I spent like 5 hours yesterday reading all kind`a info about how,where,why etc ... and the more i read,the more confused i got
Things i got to find out about my M8 = *software statusfficial* *Locked* HBoot-3.19.0.0000 Radio-1.22.30306251.27G CidNum- HTC__Y13 Version Main - 3.33.401.6
So the things i`m clearly too dumb to understand is STEPS from A-Z ,to get Android Revolution HD over Original(full with crap )ROM !?!
Would appreciate if some smart developer could explain step by step what should i do first,and what last... should i get S-off first,or should i unlock it first,or make it bootable ...as i told, i read so many info ,and got rally confused about all that process :silly:
Sorry for my bad english ,and tnx in advance for all who cared to shine some knowledge in my darkness :angel:
GruziiC said:
Things i got to find out about my M8 = *software statusfficial* *Locked* HBoot-3.19.0.0000 Radio-1.22.30306251.27G CidNum- HTC__Y13 Version Main - 3.33.401.6
Click to expand...
Click to collapse
This forum section is specifically for the AT&T version of the M8, which your phone is not.
You want to post here: http://forum.xda-developers.com/htc-one-m8/help
But all you need to do to install ARHD on your phone is unlock the bootloader via HTCDev.com, install custom recovery and flash the ROM.
---------- Post added at 10:25 AM ---------- Previous post was at 10:23 AM ----------
xtiandrey said:
When i resturned to stock. I only flash the stock recovery at rom. And i dont the radio. What radio does? Do i still need to flash it?
Click to expand...
Click to collapse
Its not clear what you are trying to do, or what your current configuration is. The radio is the software that makes your phone work on the cell network.
If you did not specifically flash the radio (s-off required) its still on some stock radio. Although it might not correspond to the software (main version or OS) version you are on, since its also not clear what software you are on.
Ok really stupid question...what does AT&T mean ...this forum is FULL with different abbreviations ,i got no clue what does half of them mean ... there should be made a topic for noobs like me with only explanation of abbreviations:fingers-crossed:
GruziiC said:
Ok really stupid question...what does AT&T mean ...this forum is FULL with different abbreviations ,i got no clue what does half of them mean ... there should be made a topic for noobs like me with only explanation of abbreviations:fingers-crossed:
Click to expand...
Click to collapse
AT&T is a carrier in the US. If you didn't know what it meant, then you shouldn't have posted here.
If you don't know an abbreviation, than look it up. There are a variety of threads that already explain what you are asking about, or just Google for it. Here is one: http://forum.xda-developers.com/showthread.php?p=52484527
It doesn't tell you what AT&T is, but it explains a great many other common acronyms and terms.
AT&T is a mobile carrier...
---------- Post added at 04:17 PM ---------- Previous post was at 04:16 PM ----------
Not an android term...just a mobile carrier network
where would i find the firmware for 4.4.4.? I tried downloading the android revolution custom rom 22.1 but i couldnt get any wifi after flashing.
didnt realize i had to update firmware(however when i received phone i was on 4.4.2 and i tried doing software update and was told up to date)
i was told go back to stock and take stock update but i never received one in the first place.
is there a way that i can flash 4.4.4. firmware now that im bootloader unlocked/rooted and s-off?
would i flash zip firmware then reflash android 22.1 or the other way around?
sorry for the noob questions but after searching for awhile i can say im honestly stuck without having to go back to 100 percent stock and hope i get an ota update
there is no att 4.4.4,if on an ATT variant,change your cid to BS_US001 and flash the 3.28.1540.5 ruu if you really want 4.4.4
nogaros4v8 said:
where would i find the firmware for 4.4.4.? I tried downloading the android revolution custom rom 22.1 but i couldnt get any wifi after flashing.
didnt realize i had to update firmware(however when i received phone i was on 4.4.2 and i tried doing software update and was told up to date)
i was told go back to stock and take stock update but i never received one in the first place.
is there a way that i can flash 4.4.4. firmware now that im bootloader unlocked/rooted and s-off?
would i flash zip firmware then reflash android 22.1 or the other way around?
sorry for the noob questions but after searching for awhile i can say im honestly stuck without having to go back to 100 percent stock and hope i get an ota update
Click to expand...
Click to collapse
nogaros4v8 said:
where would i find the firmware for 4.4.4.? I tried downloading the android revolution custom rom 22.1 but i couldnt get any wifi after flashing.
didnt realize i had to update firmware(however when i received phone i was on 4.4.2 and i tried doing software update and was told up to date)
i was told go back to stock and take stock update but i never received one in the first place.
is there a way that i can flash 4.4.4. firmware now that im bootloader unlocked/rooted and s-off?
would i flash zip firmware then reflash android 22.1 or the other way around?
Click to expand...
Click to collapse
This is discussed in a great many places. Euro firmware and instructions here: http://forum.xda-developers.com/showthread.php?t=2696282
US Dev Edition firmware here (included with WNC's ROM): http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
Assume you are on AT&T, since this forum section is specific to the AT&T version. Note that Euro ROMs may create some network issues on AT&T (most prominent of which is LTE issues with Google services). The best combo for AT&T is WNC's ROM and the matching firmware.
Wonders_Never_Cease said:
there is no att 4.4.4,if on an ATT variant,change your cid to BS_US001 and flash the 3.28.1540.5 ruu if you really want 4.4.4
Click to expand...
Click to collapse
i guess thats where the confusion lies. Its not that i want 4.4.4. i thought i needed 4.4.4. to run the custom rom.
---------- Post added at 04:07 PM ---------- Previous post was at 04:02 PM ----------
redpoint73 said:
This is discussed in a great many places. Euro firmware and instructions here: http://forum.xda-developers.com/showthread.php?t=2696282
US Dev Edition firmware here (included with WNC's ROM): http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
Assume you are on AT&T, since this forum section is specific to the AT&T version. Note that Euro ROMs may create some network issues on AT&T (most prominent of which is LTE issues with Google services). The best combo for AT&T is WNC's ROM and the matching firmware.
Click to expand...
Click to collapse
correct i followed those instructions and downloaded the latest firmware from that link and i still couldnt get wifi to work on the revolution 22.1 rom. i then followed the directions went s-off to try and find a firmware for me to run the rom and couldnt get anything to work.
Yes i am on att. currently 4.4.2 rooted with s-off running twrp as my customer recovery.
nogaros4v8 said:
correct i followed those instructions and downloaded the latest firmware from that link and i still couldnt get wifi to work on the revolution 22.1 rom. i then followed the directions went s-off to try and find a firmware for me to run the rom and couldnt get anything to work.
Click to expand...
Click to collapse
What did you try to flash ("couldn't get anything to work" doesn't' tell us a thing)? And what was the result?
redpoint73 said:
What did you try to flash ("couldn't get anything to work" doesn't' tell us a thing)? And what was the result?
Click to expand...
Click to collapse
your right i should be more specific. i went under the firmware section for the revolution rom and downloaded the firmware (3.32.531.2.zip). Now learning that this is euro rom and not att specific rom i guess the firmware i installed had nothing to do with att. the result didnt change. it was as if i flashed the rom without the firmware again. everything worked fine just no wifi. Before doing any of that i did a backup with twrp with just stock settings. right now im rooted and s-off. Looking into the rom you suggested and reading before i do anything. Its quite confusing this go around for me not too sure why.
appreciate everyones help though ! :good:
Backup your files [email protected] pics music etc,change cid and run the 3.28.1540.5 ruu,this is the same device(att variant) as us developer edition,will put you to latest compatable firmware and enable you to run any 4.4.4 builds out.
nogaros4v8 said:
your right i should be more specific. i went under the firmware section for the revolution rom and downloaded the firmware (3.32.531.2.zip). Now learning that this is euro rom and not att specific rom i guess the firmware i installed had nothing to do with att. the result didnt change. it was as if i flashed the rom without the firmware again. everything worked fine just no wifi. Before doing any of that i did a backup with twrp with just stock settings. right now im rooted and s-off. Looking into the rom you suggested and reading before i do anything. Its quite confusing this go around for me not too sure why.
appreciate everyones help though ! :good:
Click to expand...
Click to collapse
nogaros4v8 said:
your right i should be more specific. i went under the firmware section for the revolution rom and downloaded the firmware (3.32.531.2.zip). Now learning that this is euro rom and not att specific rom i guess the firmware i installed had nothing to do with att. the result didnt change. it was as if i flashed the rom without the firmware again. everything worked fine just no wifi. Before doing any of that i did a backup with twrp with just stock settings. right now im rooted and s-off. Looking into the rom you suggested and reading before i do anything. Its quite confusing this go around for me not too sure why.
Click to expand...
Click to collapse
Did you flash the firmware with fastboot, following the instructions from the first link I supplied?
I think you are doing something wrong, which is probably why WNC is suggesting the RUU (which is a executable, and pretty much self-running).
Wonders_Never_Cease said:
Backup your files [email protected] pics music etc,change cid and run the 3.28.1540.5 ruu,this is the same device(att variant) as us developer edition,will put you to latest compatable firmware and enable you to run any 4.4.4 builds out.
Click to expand...
Click to collapse
just realized you wrote the rom that was suggested lol. I think im going to go that route instead. Not sure how to change a CID but i will def read up on it. i noticed your rom says it doesnt need to be changed however. thanks for the support
---------- Post added at 05:07 PM ---------- Previous post was at 04:59 PM ----------
redpoint73 said:
Did you flash the firmware with fastboot, following the instructions from the first link I supplied?
I think you are doing something wrong, which is probably why WNC is suggesting the RUU (which is a executable, and pretty much self-running).
Click to expand...
Click to collapse
yes i flashed the firmware with fastboot. i read both those posts before attempting even watched a few vids to make sure i did everything correct. However i think i am just going to go with WNC rom. i honestly had no idea there were euro roms and att specific roms. I figured everything in the att section was att specific. live and learn
nogaros4v8 said:
yes i flashed the firmware with fastboot. i read both those posts before attempting even watched a few vids to make sure i did everything correct. However i think i am just going to go with WNC rom. i honestly had no idea there were euro roms and att specific roms. I figured everything in the att section was att specific. live and learn
Click to expand...
Click to collapse
What is your current hboot and radio numbers (both are displayed in bootloader).
Also, you often have to flash the firmware zip twice in order for all the modules to install.
Connect phone to computer with fastboot in power settings turned off, open a command prompt navigate to your adb/fastboot location and run adb reboot bootloader,once phone reboots it will connect to fastbootusb ,once this is established run this command fastboot oem writecid BS_US001then run fastboot reboot-bootloader,once this is done can run the ruu from fastboot connection.
nogaros4v8 said:
just realized you wrote the rom that was suggested lol. I think im going to go that route instead. Not sure how to change a CID but i will def read up on it. i noticed your rom says it doesnt need to be changed however. thanks for the support
---------- Post added at 05:07 PM ---------- Previous post was at 04:59 PM ----------
yes i flashed the firmware with fastboot. i read both those posts before attempting even watched a few vids to make sure i did everything correct. However i think i am just going to go with WNC rom. i honestly had no idea there were euro roms and att specific roms. I figured everything in the att section was att specific. live and learn
Click to expand...
Click to collapse
redpoint73 said:
What is your current hboot and radio numbers (both are displayed in bootloader).
Also, you often have to flash the firmware zip twice in order for all the modules to install.
Click to expand...
Click to collapse
hboot- 3.19.0.000
radio 1.22.21331147a1.296
yea i read that it will fail sometimes the first time and to just run the process again.
nogaros4v8 said:
hboot- 3.19.0.000
radio 1.22.21331147a1.296
yea i read that it will fail sometimes the first time and to just run the process again.
Click to expand...
Click to collapse
The hboot and radio numbers indicate you are on the latest firmware. If you did in fact flash the firmware twice, I would be confidant the firmware is all properly installed. I would try either:
1) Flash the desired ROM again after wiping data, cache and Dalvik
2) RUU as WNC suggests
3) Try WNC's ROM with corresponding firmware

Need Help flashing 4.4.4 To AT&T HTC One M8.

I have an HTC One M8 AT&T Branded but it has 4.4.2 on it and i wanna flash viperrom 3.2.1 but it requires androids 4.4.4 software. im S-ON, 3.16 Bootloader with 1.58.502.1 Software number. Baseband Version is 1.16.21331931.LA11G_20.31A.4145.02L. im just looking to Update from 4.4.2 to 4.4.4 but i cant seem to find out how. Any help would be great.
Perfect.
Unlock your bootlooader if you haven't already, fastboot flash recovery (TWRP/PHILZ),root using the chosen custom recovery,make a backup before or after root.
Go here http://theroot.ninja/ for Sunshine
S-OFF cause that's what your going to need to update as far as 4.4.4
Orrrr just wait a few days for the ATT 4.4.4 build to be released (ETA 29th) and then youll have 4.4.4 without having to do anything.
Wonders_Never_Cease said:
Orrrr just wait a few days for the ATT 4.4.4 build to be released (ETA 29th) and then youll have 4.4.4 without having to do anything.
Click to expand...
Click to collapse
That's a better idea for sure.
I haven't noticed if Sunshine has an update that works with 4.4.4 yet.
Are you S-OFF ?
What are the advantages/disadvantages of S-OFF so the OP knows what he might be missing.
Do you know when the Sunshine update will be?
Yup,no [email protected],[email protected],there are plenty of posts about advantages and disadvantages...my point of view is simple,it is not needed for the novice,ive seen too many mess things due to lack of knowledge. My usage of it is for switching between att and developer ROM's to get latest updates. Outside of that I dont mess with conversions,to risky for a 6-700 device. My advice is stick to htc dev unlocked bootloader and wait for official update.
jball said:
That's a better idea for sure.
I haven't noticed if Sunshine has an update that works with 4.4.4 yet.
Are you S-OFF ?
What are the advantages/disadvantages of S-OFF so the OP knows what he might be missing.
Do you know when the Sunshine update will be?
Click to expand...
Click to collapse
Wonders_Never_Cease said:
Yup,no [email protected],[email protected],there are plenty of posts about advantages and disadvantages...my point of view is simple,it is not needed for the novice,ive seen too many mess things due to lack of knowledge. My usage of it is for switching between att and developer ROM's to get latest updates. Outside of that I dont mess with conversions,to risky for a 6-700 device. My advice is stick to htc dev unlocked bootloader and wait for official update.
Click to expand...
Click to collapse
Cool thank you
Im not S-OFF but hell ill wait for the 29th to roll around and see if i have an update. Can you link me to the info stating its around the 29th?
darkninja908 said:
Im not S-OFF but hell ill wait for the 29th to roll around and see if i have an update. Can you link me to the info stating its around the 29th?
Click to expand...
Click to collapse
I didn't Google for to long but I haven't found concrete links that state the exact date .how many times have we been promised a date and watch it pass by anyways.
May I ask if you've modified any other device before this one?
I'm not trying to push,but S-OFF might be in your future and will not halt an OTA from installing.
The version your on is easily exploitable using "Sunshine" unless you take the soon to be 4.4.4 update.
Nobody knows when Sunshine will have an update even with the team working on it as we speak.
Wont be much on Google @date,came from somewhere else. And nothing is ever "concrete" with software,especially with carrier branded software.
jball said:
I didn't Google for to long but I haven't found concrete links that state the exact date .how many times have we been promised a date and watch it pass by anyways.
May I ask if you've modified any other device before this one?
I'm not trying to push,but S-OFF might be in your future and will not halt an OTA from installing.
The version your on is easily exploitable using "Sunshine" unless you take the soon to be 4.4.4 update.
Nobody knows when Sunshine will have an update even with the team working on it as we speak.
Click to expand...
Click to collapse
jball said:
I didn't Google for to long but I haven't found concrete links that state the exact date .how many times have we been promised a date and watch it pass by anyways.
May I ask if you've modified any other device before this one?
I'm not trying to push,but S-OFF might be in your future and will not halt an OTA from installing.
The version your on is easily exploitable using "Sunshine" unless you take the soon to be 4.4.4 update.
Nobody knows when Sunshine will have an update even with the team working on it as we speak.
Click to expand...
Click to collapse
I have Rooted, and flashed multiple ROMS to my old M7 before. Nothing crazy.
I as well have the same build, unlocked bootloader, flashed custom recovery. Will I have to return to stock recovery using 1.58.502.1 RUU and to get the OTA update to 4.4.4??
I'm trying to get the latest Android Revolution ROM for 4.4.4 but realized I was in a bit of a pickle. I'd like to take the path of least resistance on this one - any advice would be super appreciated. Thanks!
pmoser16 said:
I as well have the same build, unlocked bootloader, flashed custom recovery. Will I have to return to stock recovery using 1.58.502.1 RUU and to get the OTA update to 4.4.4??
I'm trying to get the latest Android Revolution ROM for 4.4.4 but realized I was in a bit of a pickle. I'd like to take the path of least resistance on this one - any advice would be super appreciated. Thanks!
Click to expand...
Click to collapse
I'd say wait till tomorrow to see if an OTA update will roll out.
Or if you just can't wait for the ability to flash what you desire than I would go S-OFF and flash a non At&t firmware that you need to allow a smooth function of mentioned ROM.
Im restoring back to default AT&T ROM and such and will post weather the update has been pushed or not. i sure hope it has
**Update** Still no update, i got the " Current Software is up to date, You may check again in 23 Hours 59 Mintues.
darkninja908 said:
Im restoring back to default AT&T ROM and such and will post weather the update has been pushed or not. i sure hope it has
**Update** Still no update, i got the " Current Software is up to date, You may check again in 23 Hours 59 Mintues.
Click to expand...
Click to collapse
You can check as many times as you like by setting your time manually ahead and your phone/device won't know the difference.
Check as many times as you like but it will remain the same,you should get a notification when it's time
So if you don't have s-off you can't update to 4.44 Sense ROMS with AT&T? I'm on Slim Rom and sound quality stinks. I want the new Android Revolution but i've read wi-fi and such doesn't work. Clarification plz?
war eagle said:
So if you don't have s-off you can't update to 4.44 Sense ROMS with AT&T? I'm on Slim Rom and sound quality stinks. I want the new Android Revolution but i've read wi-fi and such doesn't work. Clarification plz?
Click to expand...
Click to collapse
Correct .
S-OFF allows you to change your CID witch will allow you to ruu Dev Edition 4.4.4 so everything runs smoothly
I've not looked on this thread in a while. I am S-off and unlocked and my cid is 11111111 but I have never updated firmware so that I can run a 4.4.4 rom. Is it correct that I flash a RUU (guess it's not called flashing when it comes to a RUU). How do I know which RUU to post - I found this one here: http://forum.xda-developers.com/showthread.php?t=2757462 (http://dl3.htc.com/application/RUU_...G_20.31A.4145.02L_release_368350_signed_2.exe)
Will I loose root or anything (other than wiping my data) when running the ruu.
jball said:
Correct .
S-OFF allows you to change your CID witch will allow you to ruu Dev Edition 4.4.4 so everything runs smoothly
Click to expand...
Click to collapse
karatche said:
I've not looked on this thread in a while. I am S-off and unlocked and my cid is 11111111 but I have never updated firmware so that I can run a 4.4.4 rom. Is it correct that I flash a RUU (guess it's not called flashing when it comes to a RUU). How do I know which RUU to post - I found this one here: http://forum.xda-developers.com/showthread.php?t=2757462 (http://dl3.htc.com/application/RUU_...G_20.31A.4145.02L_release_368350_signed_2.exe)
Will I loose root or anything (other than wiping my data) when running the ruu.
Click to expand...
Click to collapse
I'll just say that if it's a stock ruu than it's most likely without root and it will wipe as if it came out of the box.if its a full ruu than it will come with the updated firmware as well witch should allow you to flash 4.4.4 Roms and still run smoothly.
What I did around 5:00am this morning was restore my Dev edition backup I had along with the stock recovery so I could take the Dev edition lollipop official update and now I have lollipop firmware to use with my stock GPE 5.0.1 lollipop ROM/backup .
Sweetness
karatche said:
I've not looked on this thread in a while. I am S-off and unlocked and my cid is 11111111 but I have never updated firmware so that I can run a 4.4.4 rom. Is it correct that I flash a RUU (guess it's not called flashing when it comes to a RUU). How do I know which RUU to post - I found this one here: http://forum.xda-developers.com/showthread.php?t=2757462 (http://dl3.htc.com/application/RUU_...G_20.31A.4145.02L_release_368350_signed_2.exe)
Will I loose root or anything (other than wiping my data) when running the ruu.
Click to expand...
Click to collapse
Yes, running/flashing the 4.4.4 Dev Edition RUU will update you to that appropriate firmware. But, what you linked is not Dev Edition, its a stock AT&T RUU. And its not 4.4.4 either, its 4.4.2, which is probably where you already are.
What you want is the 3.28.1540 RUU linked here: http://forum.xda-developers.com/htc-one-m8/development/ruu-m8-developer-edition-sense-1-54-t2884777
RUU will wipe the phone, install stock ROM (meaning root will be lost) and stock recovery.
But I also think its overkill to run an RUU just to update firmware, if that is the intent. My suggestion is to just run the firmware linked in the following post (which also has great instructions for doing so): http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
The above method shouldn't overwrite the current ROM and user data. But backup anything important before flashing firmware, just in case.
Side note, "flash" is a fairly generic term, and as the RUU flashes stock ROM among other things, the term "flash" is appropriate IMO.
So can I just load the firmware file and flash thru fastboot? Is it This one?
3.28.1540.5 Firmware only unmodified (Latest 4.4.4 Update,S-OFF REQUIRED)
http://goo.gl/tyhRRZ
redpoint73 said:
Yes, running/flashing the 4.4.4 Dev Edition RUU will update you to that appropriate firmware. But, what you linked is not Dev Edition, its a stock AT&T RUU. And its not 4.4.4 either, its 4.4.2, which is probably where you already are.
What you want is the 3.28.1540 RUU linked here: http://forum.xda-developers.com/htc-one-m8/development/ruu-m8-developer-edition-sense-1-54-t2884777
RUU will wipe the phone, install stock ROM (meaning root will be lost) and stock recovery.
But I also think its overkill to run an RUU just to update firmware, if that is the intent. My suggestion is to just run the firmware linked in the following post (which also has great instructions for doing so): http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
The above method shouldn't overwrite the current ROM and user data. But backup anything important before flashing firmware, just in case.
Side note, "flash" is a fairly generic term, and as the RUU flashes stock ROM among other things, the term "flash" is appropriate IMO.
Click to expand...
Click to collapse

Categories

Resources