this is my device before flashing and is from the log from flashtool
Current device : C6833 - EP7337DJEB - 1275-6410_R4C - 1274-7565_14.4.A.0.108 - EURO-LTE_14.4.A.0.108
i have re locked bootloader and flashed with - C6833_14.4.A.0.108.ftf
before i messed around i had just root and had options for 4g and now this has gone
any ideas how i can fix this im on the three network
thanks in advance Mick
Related
Hello all,
I followed the [HOW-TO]UNLOCK bootloader for X10, and now i cannot use my SIM card : when i put it in the X10, it boot, i have the sony ericsson logo, then i type my PIN number and ... nothing ... blue screen (wallpaper), i cant go anywhere.
I tried many things :
> boot the X10 without SIM card => it's ok, no problem
> i insert the SIM card in an other phone => it's ok
So i :
> Installed 2.3.3 firmware via SEUS => blue screen after type pin code
> Installed 2.1 firmware via Flashtool => blue screen after type pin code
> Installed 1.6 firmware via Flashtool => blue screen after type pin code
> Downgraded Azuzu Kernel => blue screen after type pin code
> Upgraded Azuzu Kernel => blue screen after type pin code
> Installed DooMKernel-v05 => blue screen after type pin code
> I tried qsd8250_semc.cmd => blue screen after type pin code
> Then qsd8250_setool2.cmd => blue screen after type pin code
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
S1 Tool :
RUNNING S1_EROM VER "r8A033"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "R4A024"
MODEL (from GDFS): X10i
SOFTWARE VERSION: 1227-4612_3.0.1.G.0.75
CUSTOM VERSION: 1232-9897_R1C
FILESYSTEM VERSION: WORLD-1-4-8_3.0.1.G.0.75
SERIAL NO: CB511K2HJP
SEMC SIMLOCK CERTIFICATE
Elapsed:9 secs.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
I have no more idea ... And you ?
Thanks you !!
I have the same problem. No SIM card is detected after unlocking bootloader. Any fix for this?
EDIT:
Well, I finally solved the SIM card problem. I restored the original x10 bootloader, hope it helps!
Here's the link to the thread: http://forum.xda-developers.com/showthread.php?p=17494360
i dont think theres any fix for this atm... but if unlocked properly then the sim card should be read !!
well you should restart the whole process of unlocking the bootloader but make sure you are eligible for it. and instead of the application you first used to unlock the bootloader use the other one because i remember it coming with two applications
you are the man....very great solution
Feel lucky
I had the same problem but I can't restore my bootloader so I'm kinda screwed
network problem
I`ve posted my problem in several forums here in XDA, but I got no answer. Mine is kind of the same as yours, so here it goes. I`ve flashed cnm7 on my x10. The phone is locked on Vodafone Spain. I thought that if I change the software, it will allsow unlock the network, but no.
When i`ve inserted my other SIM card, the phone didn`t ask me for the network code, as it did before flashing.
and i thought that it was unlocked, but no. It`s like i don`t have network coverage.
And when I`m trying to manualy find the available networks, i get the messege "error finding networks".
I get this message with both SIM cards inserted. I`m saying both, because I only have the network problem when
i insert any other SIM card, besides the Vodafone one... Please, really need help, because I`m gonna leave Spain
and need to use my own SIM card. Thanks in advance!
Sorry if i shouldn`t post this here, but anywhere else i got no answer...
Right, i have a little problem, for some reason i can no longer flash any .ftf onto my s
A bit of history:
Phone is standard UK simfree/generic (with yellow screen!)
came with .62 stock, updated to .67 OTA
Flashed SG generic .73 - all went ok.
Flashed CE1 Generic .73 - again all went ok
I now need to revert to stock UK as i need to send the phone back for yellow tint, so i did this:
PCC- Repair phone... all went ok, but still on CE1 generic .73 (i thought this would revert phone back to UK?)
ok, i thought... simple, i'll just flash generic uk .67 with flashtool.... won't work!
i can't even flash the same CE1 generic .73 that i previously flashed!
Ive tried with both flashtool 0.7.1.0 and 0.6.8.0
Flashtool says:
09/011/2012 09:11:01 - INFO - Selected LT 26_6.0.A.3.67_Generic_UK_(1257-3921).ftf
09/011/2012 09:11:01 - INFO - Preparing files for flashing
09/011/2012 09:11:31 - INFO - Please connect your device into flashmode.
09/012/2012 09:12:02 - INFO - Opening device for R/W
09/012/2012 09:12:02 - INFO - Reading device information
09/012/2012 09:12:02 - INFO - Start Flashing
09/012/2012 09:12:02 - ERROR -
09/012/2012 09:12:02 - ERROR - Error flashing. Aborted
09/012/2012 09:12:02 - INFO - Device connected with USB debugging off
09/012/2012 09:12:02 - INFO - For 2011 devices line, be sure you are not in MTP mode
09/012/2012 09:12:30 - INFO - Selected LT 26_6.0.A.3.73_Generic CE1.ftf
09/012/2012 09:12:30 - INFO - Preparing files for flashing
09/012/2012 09:12:45 - INFO - Please connect your device into flashmode.
09/012/2012 09:12:45 - INFO - Opening device for R/W
09/012/2012 09:12:45 - INFO - Reading device information
09/012/2012 09:12:45 - INFO - Start Flashing
09/012/2012 09:12:45 - ERROR -
09/012/2012 09:12:45 - ERROR - Error flashing. Aborted
09/012/2012 09:12:45 - INFO - Device connected with USB debugging off
09/012/2012 09:12:45 - INFO - For 2011 devices line, be sure you are not in MTP mode
Click to expand...
Click to collapse
WTF have I done??
technaudio said:
Right, i have a little problem, for some reason i can no longer flash any .ftf onto my s
A bit of history:
Phone is standard UK simfree/generic (with yellow screen!)
came with .62 stock, updated to .67 OTA
Flashed SG generic .73 - all went ok.
Flashed CE1 Generic .73 - again all went ok
I now need to revert to stock UK as i need to send the phone back for yellow tint, so i did this:
PCC- Repair phone... all went ok, but still on CE1 generic .73 (i thought this would revert phone back to UK?)
ok, i thought... simple, i'll just flash generic uk .67 with flashtool.... won't work!
i can't even flash the same CE1 generic .73 that i previously flashed!
Ive tried with both flashtool 0.7.1.0 and 0.6.8.0
Flashtool says:
WTF have I done??
Click to expand...
Click to collapse
Try another FTF
i had a similar problem, turned out to be a problem with the phone, i had to do a repair on sony pc companion and then flash again, it did work after this one, i was trying to install the stock uk to send mine back to phones for u
I would appreciate a little help with my Sprint Samsung Galaxy Phone:
Detail:
I have been trying to load ROMs on my Phone for 2 months. I had success with rooting the phone via OneClick several months ago. Yesterday I tried for the 50th time to load to ROMs to no avail (Status 6 & 7 errors. The beta CM tool never worked for me as well Mac and Win)). I recovered back from Nandroid back up and begin to see the com.google.playservices error on a constant bases as well as no network signal. I flashed back to factory settings and completed another restore of my Nandroid backup. This cleared the goggle errors. I continue to have problems with my network reception (WiFi Works Great). I actually called Sprint and was given the MSL Code to reset the phone. When I enter the code and press OK - nothing happens - its as if the OK button is locked.
Update to PRL, Profiles, and Firmware result in an error code of 407. Samsung Software is up to date. Flashing the radio did not work. I tried all of the Samsung code settings prior to calling Sprint as well.
Details:
- Model SPH-L710
- Android Version 4.4.2
- Baseband Unknown
- Kernel Version 3.4.0-1368792
- Build KOT49H.L710PUDND8
Status:
- Mobile Network Type is Unknown
- Service state is out of service
- Mobile state is disconnected
- Phone number unknown
- MEID, IMEI, ICCID, and PRL Version - all are unknown
I would appreciate any assistance as I have researched and read all material - please.
Thanks
I hope that you now you're on the wrong forum.....
Anything you flash from here can brick you're phone.
This is the S3 i9300 INTERNATIONAL forum.
You won't get a lot of help from here.
Search for the good forum of your phone.
Hello everyone,
i've been waiting for the official lollipop update and today I noticed that my region already got it (CDA: 1281-4642 Operator: CostumizedPT Latest Release: 23.1.A.0.726 / R4C as seen on XperiFirm) I confirmed on build.prop and my Xperia Z2 is indeed using the 1281-4642, yet I'm not getting the update.
I then tried to install it my self using Sony Mobile Flasher, I followed all the procedures but when I do the final step to flash the firmware I get this error:
14/017/2015 14:17:28 - INFO - Processing loader.sin
14/017/2015 14:17:28 - INFO - Checking header
14/017/2015 14:17:28 - ERROR - Processing of loader.sin finished with errors.
14/017/2015 14:17:28 - INFO - Ending flash session
14/017/2015 14:17:28 - ERROR - Error in processHeader : 1 : Incorrect function.
14/017/2015 14:17:28 - ERROR - Error flashing. Aborted
I looked around and this seems to be related to corrupt Firmwares, however I tried 2 different ones (CostumizedPT and VodafonePT) and both gave me the same error. I also tried 2 different USB Cables.
Does anyone know why this could be happening?
Same for me, got it last week, checked system update, nothing. Connected to the PC companion and still no updates "Your device is up to date" I have the D6503 eu / Uk amazon unlocked version. When I do a flash through the software I'm back onto kit kat.. Very annoying when I need to utilise my SD card with app data.
Hello everybody!!
I have a problem with the smart phone z3v d6708
I'm not good at English. and had to use google translate
hope everyone sympathized
My problem is as follows:
I flash rom stock 5.1.1 for Z3v D6708 (stock 4.4.4 no root. no unlock bootloader) by flashtool 0.9.21 and uncheck simlock in Misc TA exclude
after flash complete, D6708 network signal is lost and the camera can not be used. I've tried every way but without success (reflash rom stock 4.4.4 _ 5.0.2_5.1.1 _hard reset_repair by xperia com.....)
My current test *#06# imei no lost. but in phone about / sim status / imei : unkown - imei sv: unkown
*#*#7378423#*#* Service test -> Security: all rows [key ok][active] . but configuration -> rooting status: unknown
hope everyone indications <3. thank you very much
pphapp said:
Hello everybody!!
I have a problem with the smart phone z3v d6708
I'm not good at English. and had to use google translate
hope everyone sympathized
My problem is as follows:
I flash rom stock 5.1.1 for Z3v D6708 (stock 4.4.4 no root. no unlock bootloader) by flashtool 0.9.21 and uncheck simlock in Misc TA exclude
after flash complete, D6708 network signal is lost and the camera can not be used. I've tried every way but without success (reflash rom stock 4.4.4 _ 5.0.2_5.1.1 _hard reset_repair by xperia com.....)
My current test *#06# imei no lost. but in phone about / sim status / imei : unkown - imei sv: unkown
*#*#7378423#*#* Service test -> Security: all rows [key ok][active] . but configuration -> rooting status: unknown
hope everyone indications <3. thank you very much
Click to expand...
Click to collapse
Pls help me :'(
Have you tried flashtool ver 0.9.23.2? and only check the items in wipe box.
pphapp said:
I flash rom stock 5.1.1 for Z3v D6708 (stock 4.4.4 no root. no unlock bootloader) by flashtool 0.9.21 and uncheck simlock in Misc TA exclude
Click to expand...
Click to collapse
I'm afraid you've bricked your phone.
You should exclude simlock.ta from being flashed (DO NOT UNCHECK it in exclude list).
Have you tried Verizon Software Upgrade/Repair Assistant?
BTW, I need also this software & will be very glad if you'd like to upload it.