Q&A for [ROM][I605]Cyanogenmod 12.0 [12/12/14]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][I605]Cyanogenmod 12.0 [12/12/14]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Wow
glockman4519 said:
I'm going to have to give that a shot. Thanks.
Click to expand...
Click to collapse
Thanks for the Lp rom will try it out when its more stable
Nice build BTW so far I can only get to the loading screen and bootloops.
Device: SHV-E250S
I tried dirty flashing from CM11 to CM12. Also flashed signed converter e250s but only stuck on Samsung Logo then reboots.
Flashed different Kernels and finally CM Logo appeared but it was sitting there for 45 mins and nothing happens.
Thanks
Nice Job
I went ahead and flashed this bad boy after reading up on it and noticed that its smooth and I got mobile data working calls and texts working only had issues with the camera and gps otherwise I was impressed with the rom build being so early and running so smooth way to go keep up the hard work and im sure its not just me but we all appreciate what you are doing for the Note 2 community Thanks Again
Working
I got the install working as correctly as everyone else.
I originally tried just dirty flashing over my current ROM(LiquidSmooth 3.2 Milestone based on 4.4.4) and that didn't work right. I factory reset and then went right to an install. Haven't had to play with any settings beyond the keyboard to get everything working correctly.
I can make and receive phone calls
Front facing camera is the only of the two that works.
Texts and can be received no problem, I haven't been able to try MMS as I get almost no service at my house as it is.
Overall this ROM works freaking great. Thanks @sbrissen!
Agree with moovlin. Been working well though occasionally dropping data. Couldn't thumbs up the solution since to new to this forum.
Sent from my SCH-I605 using Tapatalk
Update Issues
The last couple times I've tried updating from within the phone OS, I get a boot lock or a lot of FCs after. Will see if I can get it unstuck with a battery pull and a manual update. Is that feature not really working yet? or only with certain recoveries?
Thanks
---------- Post added at 04:21 PM ---------- Previous post was at 03:36 PM ----------
From within OS fails on my phone FCs nothing works most all setting lost, downloaded to extcard and updated, worse, it doesn't see my SIM card, and FCs. I'll try one more time with a full wipe and hope for the best. Anyone else having these issues? Worked good with this one from the weekend cm_i605-ota-bfb35cbe6b.
---------- Post added at 04:45 PM ---------- Previous post was at 04:21 PM ----------
Full clean wipe and reset seem to have fixed the issues. Letting it do it's restore process. A new feature maybe? Or just new window paint on the old process. I used today's update, and the 11/09 gapps here. I know there are several updates to the GAPPs too, but getting the phone to work again is most important. Keyboard does popup right away, I don't care for that keyboard at all, but hopefully with the reset, it will load and I can just select it again.
Seems to be going well so far. A lot of aps to download again. I hadn't setup the backup software to run yet...
Working
I installed this about a week ago and it's been working great! I haven't had any of the SMS or battery (wakelock) issues that others have reported, but i did have an issue where i could not make outgoing calls (it would immediately say "call ended", but the other side would ring) when it was first installed. It fixed itself after a couple of days. This is on the 12/17 build with the GPS hotfix. This is my first time installed a non-TW ROM, but I'm glad i tried it out! Keep up the good work!
Boot Loop
I'm trying to flash to the nightlies cm12's. i've done a fresh wipe. when i restart the it gets to the "updating apps" and reboots after it finishes the updates. after it just continues rebooting after a minute. any suggestions?
Could not receive incoming or hang up outgoing phone call. on CM12.1
I am using netzclub in Germany, data and SMS are fine. However, I find myself could not hang up on outgoing phone call. Incoming calls are a bit more tricky. The only call I could receive so far is the one from Google verification. The one who is calling can hear ringing and get directed to the voice mail.
I can try get a logcat. Shall I change the level of logcat?
It actually start from CM12 builds. I have tried wiping and fresh installation, nothing works, though.
I'm still on CM12, the build from April 16th, but I'm not quite ready to make the change to 12.1. I wanted to flash the last CM12 nightly, but I can't download it. Are the builds gradually rotated off of the site, or deprecated? Is there any other way I could download the last CM12 nightly?
Can't get GAPPs in CyanogenMod 12.1
I have a Verizon Note II SCH-1605. I had some version of CyanogenMod 12.0 installed, which included GAPPs. All was cool except GPS would not work; it kept turning High Accuracy mode off. So I'm trying to see if 12.1 is any better.
I can install cm-12.1-20150505-NIGHTLY-i605 with no issue using TWRP 2.6.0.1. When I try to install gapps-5.1-arm-2015-05-03-16-32-37 from the CyanogenMod web site or gapps-lp-20141109-signed from the [ROM][I605]Official Nightlies CM 12.1 thread or one or two others that I forget I get "set_metadata_recursive: some changes failed."
Anybody know of a GAPPPs version that might work?
---------- Post added at 12:59 PM ---------- Previous post was at 12:18 PM ----------
Forgot to mention that I wiped everything except the external sdcard, and I tried installing the gapps at the same time as CyanogenMod or after CyanogenMod is all set up.
jobren said:
I am using netzclub in Germany, data and SMS are fine. However, I find myself could not hang up on outgoing phone call. Incoming calls are a bit more tricky. The only call I could receive so far is the one from Google verification. The one who is calling can hear ringing and get directed to the voice mail.
I can try get a logcat. Shall I change the level of logcat?
It actually start from CM12 builds. I have tried wiping and fresh installation, nothing works, though.
Click to expand...
Click to collapse
Same issue here as well. I've tried the latest i605 nightly and the problem is still present. I've had to revert to a CM12 build dated 30 Jan 2015 in order to have a working phone.
Can we get the APN fixed?
Are u on a nightly build ?
Yes I stay current with the nightlies .
Wrapscallion said:
I'm still on CM12, the build from April 16th, but I'm not quite ready to make the change to 12.1. I wanted to flash the last CM12 nightly, but I can't download it. Are the builds gradually rotated off of the site, or deprecated? Is there any other way I could download the last CM12 nightly?
Click to expand...
Click to collapse
Here you can found all new version of the nightly build : http://download.cyanogenmod.org/?device=i605&type=nightly
Don't forget that if you are on a nightly build you have to flash your phone with a nighty update, you can switch between builds.
Related
Q&A for [CM12] [Lollerpop] JFLTEVZW Nightly Kangs
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [CM12] [Lollerpop] JFLTEVZW Nightly Kangs. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Looking very good so far. Just a couple things I noticed.
Contacts app crashes when trying to view a listing.
Bluetooth audio is slow and low pitched and skips a lot - makes it unusable for the time being.
MMS
Anyone else having issues with MMS? With the 11/21 build through the 11/25 build I don't always receive my MMS messages. Seems to work with the first message received after boot but after that it takes up to 15 minutes to receive a MMS if I get it at all. It also seems to take a very long time to send MMS messages out. The problem seems worse when I have WIFI enabled but it could be unrelated. I did clean installs and I am on the I545VRUFNG6 baseband if that makes a difference. Also, starting with the 11/24 build I had to go into my Network and toggle LTE/CDMA to connect to the verizon network after every boot.
If I could get MMS working reliably I would use this as my daily. Thanks for the good work devs.
whichonespink73 said:
I'm having a weird issue with my MMS. I am able to send always, but when receiving they almost always show up as "New MMS message to doanload: size xKB, expires [date]". At first I just thought it was my reception, but that doesn't seem to be the case as it's kind of a rampant issue. I only noticed this because I'm in an ongoing group chat with some old friends and I will get about 10 of these obnoxious messages with very few coming through on the first try. Thoughts?
Click to expand...
Click to collapse
I have the same issue as well. 1st MMS is usually quick but every message after send or receive takes really long. Recieved messages take up to 10 mins if i get them at all.
Home button wake on lock screen
My home button does not turn the screen on at the lock screen and I've got a malfunctioning power power button. I'm running 11/23. Do any of the newer builds permit such an action? I have attempted to change the key log but that isn't working for whatever reason. Does anyone have any suggestions?
Yes, home button wake has worked for about a week.
gonzlobo said:
Yes, home button wake has worked for about a week.
Click to expand...
Click to collapse
Thank you!
Notification pulldown
Pulling down twice from the center or once from the right side gives me my full notification toggles, but underneath my profile photo it has the text "null - null". Is there any way to get rid of this? Version 12/3
I believe it has to do with a weather icon but then again I'm not entirely sure.
It was the weather in the status bar option in settings, thanks for the fast PM's you guys are fantastic.
Having issue with voicemail. Dialer is crashing every time i call my voicemail but if I do not clear the error, everything works but because of the in screen error, I cannot interface with the keypad. Sorry if this is a known issue but I've been using this since day one and just noticed it and do not remember seeing this issue in the thread.
Sent from my SCH-I545 using XDA Free mobile app
Quick question [HELP NEEDED]
Quick question for the more knowledgeable here:
My Device: Verizon Galaxy s4
Current daily driver: Hyperdrive 18.1
Baseband: I545VRUFNC2
I read on the CyanogenMod official site that attempting to flash a CM based ROM on NC2 is more or less a suicidal move. Does anybody know any way i can work around this limitation? I want to try out this (or any other) Lollipop ROM
Thanks!
Anyone have swype working? Which keyboard?
thedoman said:
Anyone have swype working? Which keyboard?
Click to expand...
Click to collapse
SwiftKey works great for me.
[GS4 VZW] Problem Updating from CM11 KitKat 4.4.4 to CM12
I have had my phone rooted since the day I got my GS4 VZW, which was the day after it was released, and I have almost exclusively been on Cyanogen Mod 10/11 the entire time.
I am currently having trouble updating to CM 12. After I factory restore in CWM and wipe dalvik, I go to install the newest CM12 and I receive the "installation aborted error." I tried installing several other compatible versions of CM12 and all receive the same abortion error. I then reverted back to CM11 and I had no problem installing the rom as well as GApps. I even went through the MetaINF>Com>Google>Android>Updater-Script and removed the check device to see if that would change anything; it did not. Can someone assist me with this problem, I have no idea what's wrong and I've scoured the forum for the past day trying to find a solution and I've found nothing. Thanks for any help offered!
Jas_Bart said:
I have had my phone rooted since the day I got my GS4 VZW, which was the day after it was released, and I have almost exclusively been on Cyanogen Mod 10/11 the entire time.
I am currently having trouble updating to CM 12. After I factory restore in CWM and wipe dalvik, I go to install the newest CM12 and I receive the "installation aborted error." I tried installing several other compatible versions of CM12 and all receive the same abortion error. I then reverted back to CM11 and I had no problem installing the rom as well as GApps. I even went through the MetaINF>Com>Google>Android>Updater-Script and removed the check device to see if that would change anything; it did not. Can someone assist me with this problem, I have no idea what's wrong and I've scoured the forum for the past day trying to find a solution and I've found nothing. Thanks for any help offered!
Click to expand...
Click to collapse
Did you verify the MD5 checksum? Might be a bad download.
EDIT: I just re-read your post, I suppose it's unlikely that you would have had several bad downloads, but it's still worth checking the MD5. Also, which recovery do you have? You might have to toggle the script asserts before you flash the rom.
keyboard issue
Hey I'm on yesterday's nightly (12/17) and am having an issue with my keyboard. I can't seem to get it to use Swiftkey, each time I set it to swiftkey under Language & input it only seems to work for one use and the next time I go to search / text I have google keyboard. Anyone else seeing this? Rom otherwise running great ... just made the jump from Kitkat Monday and am very impressed with how stable this is already.
ascallop said:
Did you verify the MD5 checksum? Might be a bad download.
EDIT: I just re-read your post, I suppose it's unlikely that you would have had several bad downloads, but it's still worth checking the MD5. Also, which recovery do you have? You might have to toggle the script asserts before you flash the rom.
Click to expand...
Click to collapse
Okay I found the fix to anyone with the same problem. I was using a Mac to download the .zip files and what would happen is that safari would automatically unzip the files and to fix it I thought I could just simply compress them again. Here is the fix, go to Safari>Preferences>General and uncheck the "open safe files after download" box and that will prevent the files from automatically unzipping. Then you can go ahead with flashing your rom normally. Hope this helped anyone using a mac and trying to update their GS4!
medic211987-2 said:
Quick question for the more knowledgeable here:
My Device: Verizon Galaxy s4
Current daily driver: Hyperdrive 18.1
Baseband: I545VRUFNC2
I read on the CyanogenMod official site that attempting to flash a CM based ROM on NC2 is more or less a suicidal move. Does anybody know any way i can work around this limitation? I want to try out this (or any other) Lollipop ROM
Thanks!
Click to expand...
Click to collapse
Bootloader needs to be MDK to flash CM since that is the only bootloader capable of being locki'd to flash a new kernel. Modem can be any one you want.
lRawd said:
I have the same issue as well. 1st MMS is usually quick but every message after send or receive takes really long. Recieved messages take up to 10 mins if i get them at all.
Click to expand...
Click to collapse
same problem here. But i've had this issues since CM11
jareddlc said:
same problem here. But i've had this issues since CM11
Click to expand...
Click to collapse
I was able to fix the issue by flashing SLIM_APNS.zip. I am on VZW and that fixed all of my mms issues. On CM11 I fixed it by editing APN settings which I assume this zip does. Let me find a link to the zip/post.
---------- Post added at 10:46 AM ---------- Previous post was at 09:59 AM ----------
For any VZW users having MMS issues, flashing the SLIM_APNS.zip from here seems to work.
what modem are you running?
Q&A for [ROM][CM12.0] Official CM12.0 for E970
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][CM12.0] Official CM12.0 for E970. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
wkobaint said:
Could this versions working on e975?
Click to expand...
Click to collapse
Nope, but if you choose you model from device list below, it will works.
So I dirty flashed this over my cm11 and Google play has stopped working. Won't connect at all. Any help is appreciated
Volstagg.The.Valiant said:
So I dirty flashed this over my cm11 and Google play has stopped working. Won't connect at all. Any help is appreciated
Click to expand...
Click to collapse
Did you flash 5.0 gapps?
dandrumheller said:
Did you flash 5.0 gapps?
Click to expand...
Click to collapse
Nope. Could find only old gapps
terribly sorry about the brain fart. whole problem arose because i didnt flash the correct gapps . got the gapps from xda and now its working well. but i am getting a pop up saying that google play services have not been installed on your computer etc...
will this problem go away if i just install the google play services apk?
edit : after flashing the proper gapps, an update from the play store solved everything. Now running smoothly.
since i updated to cm12,go power master has not been able to turn data off when the screen turns off. this was working flawlessly in kitkat. even the go power master widget is not working. thought there might be a problem with root,so flashed supersu 2.40 from recovery. but still it isnt working. any idea what the problem might be?
Volstagg.The.Valiant said:
since i updated to cm12,go power master has not been able to turn data off when the screen turns off. this was working flawlessly in kitkat. even the go power master widget is not working. thought there might be a problem with root,so flashed supersu 2.40 from recovery. but still it isnt working. any idea what the problem might be?
Click to expand...
Click to collapse
Has the app been updated to support LP? At times in the past, access for 3rd party apps to stuff like data connection, which requires root, sometimes changes functionality with version upgrades. Don't know if that's the case in this circumstance, but it's something to look into.
Performance drop
Flashed this rom with fulll wipe. Works well, but sometimes performance *drops* happens. It becomes VERY slow, like CPU speed drops down to 128mhz. I had the same problem on cm 11.
Who knows how to fix it?
Looking great and functions great but I am getting terrible battery life due to "miscellaneous" or "Cellular Standby" according to battery stats.
E970
1/15/2015 nightly (problem persists from previous nightly)
Same problem on stock and Solid_GEEB Kernel
PA 5.0 GAPPS
Lucky to get 12 hours of battery under normal use. Any suggestions?
Thanks,
-Nick
Any ideas how to fix my issue with the BT mac address being changed to "00:00:00:00:5A:AD"? I had the wrong address on CM11 also but it was a different incorrect address and I was able to fix it. I've posted details in my thread for fixing the issue on CM11. http://forum.xda-developers.com/showthread.php?t=2759056#post58131969<br/>
Video call issue
Video call isn't working in both skype and viber. Skype app is crashing as soon as I turn video on. Viber just doesn't turn on the video transmission. Can please somebody report about this issue to CyanogenMod team. I use video calling really often, so this is kind of issue keeps me away from using official CM12 builds. CM11 builds had this issue too and it hasn't got fixed till now.
azatheadfi said:
Video call isn't working in both skype and viber. Skype app is crashing as soon as I turn video on. Viber just doesn't turn on the video transmission. Can please somebody report about this issue to CyanogenMod team. I use video calling really often, so this is kind of issue keeps me away from using official CM12 builds. CM11 builds had this issue too and it hasn't got fixed till now.
Click to expand...
Click to collapse
Post a logcat of it happening.
Sent from my LG-ls990 using XDA Free mobile app
CM Updates
Settings - About phone - CyanogenMod updates indicates no new updates found despite new updates posted at http://download.cyanogenmod.org/?device=e970. I switched from unofficial CM12 to official CM12 several updates ago. I'm using the gapps posted here https://s.basketbuild.com/gapps. Is there a setting I need to revise to begin seeing the CM updates on my phone. It's no big deal since I can go to the CM device list and download directly.
alliance1975 said:
Settings - About phone - CyanogenMod updates indicates no new updates found despite new updates posted at http://download.cyanogenmod.org/?device=e970. I switched from unofficial CM12 to official CM12 several updates ago. I'm using the gapps posted here https://s.basketbuild.com/gapps. Is there a setting I need to revise to begin seeing the CM updates on my phone. It's no big deal since I can go to the CM device list and download directly.
Click to expand...
Click to collapse
The 1/27 update was detected and installed. I do not know what if anything i did to make it work.
Shelnutt2 said:
Post a logcat of it happening.
Sent from my LG-ls990 using XDA Free mobile app
Click to expand...
Click to collapse
Sorry for late answer. I was too busy to post logcats earlier. I hope issues will get fixed.
I installed CM12.0 (1/27 build) but any 5.0 gapps I try fails to flash on the official TWRP 2.8.3.0 for the e970. I've tried bpear, PA, and one other. I can get the ROM to boot, then it gives FC's for every Google App, and the apps are all named by their com. ... name, and say "app not installed" when clicked. I have loaded the zip files over wifi, through adb push, via usb, and through straight download to the device. I've also run them from the external SD and the internal storage.
Is there a different recovery I should be using with this? Will a Nexus 4 recovery work on the e970?
thunder2132 said:
I installed CM12.0 (1/27 build) but any 5.0 gapps I try fails to flash on the official TWRP 2.8.3.0 for the e970. I've tried bpear, PA, and one other. I can get the ROM to boot, then it gives FC's for every Google App, and the apps are all named by their com. ... name, and say "app not installed" when clicked. I have loaded the zip files over wifi, through adb push, via usb, and through straight download to the device. I've also run them from the external SD and the internal storage.
Is there a different recovery I should be using with this? Will a Nexus 4 recovery work on the e970?
Click to expand...
Click to collapse
I'm using TWRP 2.8.4.0 recovery. I initially installed the CM12 unofficial rom along with this gapps:
https://s.basketbuild.com/gapps
and had no problem. I switched to official CM12 when announced by Shelnutt2 and have made no changes to gapps. Perhaps give that gapps a try.
Audio calls problem
Hi,
I recently updated my OS from LG's Official 4.1.2 to CM12. Everything seems to be working fine but for making/receiving calls. I am not able to hear or speak over the microphone and speaker outlet unless or until I use a headphones in which case both work properly. Can anyone please help?
Details on my upgrade:
I had backed up my data and downloaded the CM12 zip files with Gapps and SuperUser into my SD card. Once they were ready, I restarted my mobile in Recovery mode and wiped the user data and installed CM12.zip followed by Gapps followed by SuperUser. Then rebooted my mobile and check everything for the working condition. It was working perfectly except for the fact that when I receive phone calls or when I make a phone call once I attend the call, I would not be able to speak to the person or hear the person in normal mode nor in speaker mode. The only way it works is if I use my headphones.
I had installed CM12 01/26/2015 version. And have tried later versions until 01/30 but I do not find that to be fixing. It would be of great help if anyone could help me.
Thanks,
Arun
arun.rama said:
Hi,
I recently updated my OS from LG's Official 4.1.2 to CM12. Everything seems to be working fine but for making/receiving calls. I am not able to hear or speak over the microphone and speaker outlet unless or until I use a headphones in which case both work properly. Can anyone please help?
Details on my upgrade:
I had backed up my data and downloaded the CM12 zip files with Gapps and SuperUser into my SD card. Once they were ready, I restarted my mobile in Recovery mode and wiped the user data and installed CM12.zip followed by Gapps followed by SuperUser. Then rebooted my mobile and check everything for the working condition. It was working perfectly except for the fact that when I receive phone calls or when I make a phone call once I attend the call, I would not be able to speak to the person or hear the person in normal mode nor in speaker mode. The only way it works is if I use my headphones.
I had installed CM12 01/26/2015 version. And have tried later versions until 01/30 but I do not find that to be fixing. It would be of great help if anyone could help me.
Thanks,
Arun
Click to expand...
Click to collapse
Make a clean flash (in TWRP wipe system, data, cache, dalvik cache and after install cm12 and gapps) and install 84/27 hybrid modem during same recovery session, after reboot to system. Modem issues with e970 are really whimsical. I hope this will help.
P.S. Find modem image in this thread:
http://forum.xda-developers.com/showthread.php?t=2584981
azatheadfi said:
Make a clean flash (in TWRP wipe system, data, cache, dalvik cache and after install cm12 and gapps) and install 84/27 hybrid modem during same recovery session, after reboot to system. Modem issues with e970 are really whimsical. I hope this will help.
P.S. Find modem image in this thread:
http://forum.xda-developers.com/showthread.php?t=2584981
Click to expand...
Click to collapse
Hey, I just tried the steps you had mentioned and it worked like a gem. Thanks a lot for your solution. I really appreciate your help. Have a great weekend.
Arun
Q&A for [ROM] CM12-Light BETA
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] CM12-Light BETA. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
GPS Bug
Is the GPS still restarting the phone on this build?
Mustapha21 said:
Is the GPS still restarting the phone on this build?
Click to expand...
Click to collapse
Check the replies in the development build. T399 has to download an app specified in the development but people with the T399N seem to have no problems with v23.
Sent from my SGH-T399 using XDA Premium app
The developer Acreaperjb needed people to test the ROM and kireflow seems to have the SGH-T399N while he is meant to develop it for the SGH-T399. Is he now making a hybrid build for both models?
Sent from my SGH-T399 using XDA Free mobile app
wow
Had the lightwave rom on this before, and it worked well. After a few hrs of running cm i am blown away at the performance. Buttery smooth. Calls crisp, no issues whatsoever aside from the camera. Got xposed on it, gravitybox and greenify working great so far
And just thought I'd try it with the Camera MX from playstore and voila, it works! One picture at least
Bluetooth freezes calling app
Hi everyone, first of all, big thanks to AcreaperJB
I just installed version 0.2.3, overall I really like the ROM, I have two issues with it, really it's just one that I care about, here I go
1 - the big deal) I can't make calls over Bluetooth, after dialing I hear maybe one signal, maybe two if I'm lucky, after that the calling apps freezes, can't finish the call, can't call anybody else, can't hear anything, even turning off Bluetooth won't restore things, I can switch between apps and everything is fine except the calling app it's just stuck until I restart the phone, no more calling basically
2 - the workaround) camera will crash right after taking the photo, won't save the photo, I installed open camera from the play store and it works fine, I know it's a known issue, I just want to confirm it
Things to mention
- I did full install, all the partitions got wiped except the external SD card partition where I kept the ROM
- installation was scary, after installing the ROM it would circle back and forth, it was restarting and it wouldn't let me do anything, as soon as it got to CM wizard it restarted, I had no way to stop it or pause it so after about 10 restarts I gave up and just moved on and left the phone do restarts and I took care of other things around the house, already started thinking on how to go back to the stock rom, after coming back to the phone about two hours later the CM was waiting for me, got so surprised that it got out of the endless loop, i finished the wizard, went into CM and it doesn't restart anymore
thanks again
Uhm
Hey, does anyone know of a fix for the YouTube app? It keeps saying 'an error has occurred touch to retry'
SIM Card not detected?
So I clean installed the dirty v.0.2.3 and when it went to setup it said my sim card wasn't detected. Did I miss something? Does the "dirty" mean I won't get data? I'm new to this and I don't really know what the lingo means. I also can't change the APN's. It says "Access point name not available for this user".
I can't make any phone calls nor send any texts. My cellular data doesn't work either. Wi-fi and everything else works fine. Just the actual service.
Am I missing a step?
I flashed the ROM with twrp 2.8.4.0, I wiped davlick, data, cache, etc. I did the clean install, I don't understand why I am not getting any service or why my sim card isn't detected.
Please help
I need another link to download
Hi everyone
So my problem is for some reason here in Cuba I can enter to www.androidfilehost.com and download (Dirty) V.0.2.3 https://www.androidfilehost.com/?fid=24052804347774276 I dont know why but if anyone can please reupload the file to another server like MEGA or mediafire I have the Galaxy Light and I like to help to test the build and make some comments about.
Regards
michel0303 said:
Hi everyone
So my problem is for some reason here in Cuba I can enter to www.androidfilehost.com and download (Dirty) V.0.2.3 https://www.androidfilehost.com/?fid=24052804347774276 I dont know why but if anyone can please reupload the file to another server like MEGA or mediafire I have the Galaxy Light and I like to help to test the build and make some comments about.
Regards
Click to expand...
Click to collapse
https://mega.co.nz/#!R8RkhRTI!A72ioxNsedZ3uGgY3jE6MMjKkaVYYBwL8z8WBnie8lI
kireflow90 said:
https://mega.co.nz/#!R8RkhRTI!A72ioxNsedZ3uGgY3jE6MMjKkaVYYBwL8z8WBnie8lI
Click to expand...
Click to collapse
Thank you so much Downloading right now.
michel0303 said:
Thank you so much Downloading right now.
Click to expand...
Click to collapse
no problem, glad I could help
Screen going blank upon boot
I tried installing this rom after doing a full backup & then wipe. I made sure to wipe dalvik and cache. I then installed the 0.2.3.zip via TWRP 2.7.1.0 that comes with Light V3 Rom.
Install completed without error but upon boot the setup menu appears and then vanishes. I can get it to display ever-so-briefly by powering the display off/on.
I have a T-Mobile T399 unlocked for use on ATT. Unjustified Devs earlier builds did the same thing but would constantly reboot as well. Your rom doesn't reboot but the screen behaves similarly.
Have you heard of this behavior before, and are there any steps I can take to provide you with diagnostic information?
Update TWRP
Vorell said:
I tried installing this rom after doing a full backup & then wipe. I made sure to wipe dalvik and cache. I then installed the 0.2.3.zip via TWRP 2.7.1.0 that comes with Light V3 Rom.
Install completed without error but upon boot the setup menu appears and then vanishes. I can get it to display ever-so-briefly by powering the display off/on.
I have a T-Mobile T399 unlocked for use on ATT. Unjustified Devs earlier builds did the same thing but would constantly reboot as well. Your rom doesn't reboot but the screen behaves similarly.
Have you heard of this behavior before, and are there any steps I can take to provide you with diagnostic information?
Click to expand...
Click to collapse
Think you need to use the twrp 2.8.4 that is in the forum
http://forum.xda-developers.com/android/development/recovery-twrp-2-8-1-0-touch-recovery-t2924604
Try flashing a T-Mobile radio. Just Google it and it should come up.
Sent from my SGH-T399 using XDA Free mobile app
Answer: CM12-Light BETA for t399n camara workaround.
I have installed cm12 for the Samsung galaxy light t399N.. I am happy to report Everything is working fine! except the stock camera, I tried 7-8 camera apps on the Google play store with no luck, until.... VIOLA, I found one that works. It is called FOTOR. it works now. I have an extra step to deal with but the point is that my phone is now fully functional and running 5.02 lollipop on my METRO PCS t399n. BTW i did not have to edit the apn settings; interestingly, I have an indicator that tells me I have T-Mobil for my carrier.... Thank goodness for the recent merger and switch over to the T-Mobil network, one more problem solved. Hope that helps someone else out there.
thanks
it works
I'm using it a week ago, everythings is ok, only the stock camera not save the photos,
Sorry for my english,
---------- Post added at 01:18 AM ---------- Previous post was at 01:12 AM ----------
md777 said:
I have installed cm12 for the Samsung galaxy light t399N.. I am happy to report Everything is working fine! except the stock camera, I tried 7-8 camera apps on the Google play store with no luck, until.... VIOLA, I found one that works. It is called FOTOR. it works now. I have an extra step to deal with but the point is that my phone is now fully functional and running 5.02 lollipop on my METRO PCS t399n. BTW i did not have to edit the apn settings; interestingly, I have an indicator that tells me I have T-Mobil for my carrier.... Thank goodness for the recent merger and switch over to the T-Mobil network, one more problem solved. Hope that helps someone else out there.
Click to expand...
Click to collapse
I'm using the app A Better Camera, it's woking ok, on my t399n
Reboot cycle
After installing V0.2.3 using TWRP 2.8.4.0 on a T399 on a T-mo network I am stuck in a continuous cycle of rebooting every few seconds. I have tried reinstalling starting from a stock image and wiping the cache, data, and dalvik. Any idea what I could be messing up?
yodal said:
After installing V0.2.3 using TWRP 2.8.4.0 on a T399 on a T-mo network I am stuck in a continuous cycle of rebooting every few seconds. I have tried reinstalling starting from a stock image and wiping the cache, data, and dalvik. Any idea what I could be messing up?
Click to expand...
Click to collapse
Set GPS to device only
Sent from my SGH-T399N using XDA Free mobile app
DISCLAIMER: I AM IN NO WAY RESPONSIBLE FOR ANY PROBLEMS ON YOUR DEVICES CAUSED BY FLASHING THESE BUILDS. THE UPSTREAM CODE AND BUILDING IS MAINTAINED BY THE CYANOGENMOD TEAM, NOT ME. I AM NOT ASSOCIATED WITH THEIR TEAM, I AM JUST THE THREAD OWNER.
What is CyanogenMod ? It is an aftermarket firmware for a number of cell phones based on the open-source Android operating system. It offers features not found in the official Android based firmwares of vendors of these cell phones.
CyanogenMod 13.0 : Download
Changelog : Changelog
Open GApps : Download ( arm, 6.0, nano )
TWRP : Download​
CM13 Nightlies, ROM for the Sprint Galaxy S5
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Nightly, now moved to 14.1
UPDATE 6/14: Looks like there's an issue that 5ghz network doesn't work on higher bands, but it works on 36-48 and bluetooth. Hopefully it will be fixed soon.
UPDATE 6/23: There's a fix attempt on boot image. Link. Thanks to @haggertk
UPDATE 6/27: Looks like Bluetooth and Wifi issue have been fixed since 6/25 nightly.
Thanks to @haggertk
Created 2016-05-12
Last Updated 2016-11-29
Reserved
Works great!
Is there a version of SuperSU that works with CM13? All trash the ROM and have to do full restore.
I just needed confirmation on something. I'm currently running CM12.1 on a SM-G900P with firmware G900PVPU3BOK4. Does the update to CM 13.0 require a firmware update to G900PVPU3CPCA (the MM level of firmware from the stock Sprint download) or can I stay on G900PVPU3BOK4 with CM13.0?
btw: Sorry for the double post. I'm new to XDA and having trouble figuring out which forum is correct for me to ask my questions in.
Thanks!
alexclang said:
I just needed confirmation on something. I'm currently running CM12.1 on a SM-G900P with firmware G900PVPU3BOK4. Does the update to CM 13.0 require a firmware update to G900PVPU3CPCA (the MM level of firmware from the stock Sprint download) or can I stay on G900PVPU3BOK4 with CM13.0?
btw: Sorry for the double post. I'm new to XDA and having trouble figuring out which forum is correct for me to ask my questions in.
Thanks!
Click to expand...
Click to collapse
From my limited experience, it does not appear to run on CPCA. CM13 on OK4 worked for me.
e-j said:
From my limited experience, it does not appear to run on CPCA. CM13 on OK4 worked for me.
Click to expand...
Click to collapse
Excellent!! I'll just install the latest nightly for CM13 just like I was going for 12.1 and hopefully things will go smoothly!
I'm having difficulty with CM13 and Open GApps. If I flash CM13 alone everything is fine. When I install CM13 and then the ARM 6.0 pico Open GApps through the same TWRP 3.0.2-1 session (as directed here: https://github.com/opengapps/opengapps/wiki/Notes-for-Android-6.0), I either get constant force close errors after boot (with 5/19 CM & GApps zips) or an endless blue android boot screen (with 5/20 CM & GApps zips). I've tried re-downloading the zips and reinstalling after wiping (dalvik, system, data, cache) multiple times.
Any ideas?
UPDATE/PSA: USE THE NANO GAPPS AS STATED IN THE OP. NANOGAPPS INFINITY OPENS THE DOOR.
e-j said:
I'm having difficulty with CM13 and Open GApps. If I flash CM13 alone everything is fine. When I install CM13 and then the ARM 6.0 pico Open GApps through the same TWRP 3.0.2-1 session (as directed here: https://github.com/opengapps/opengapps/wiki/Notes-for-Android-6.0), I either get constant force close errors after boot (with 5/19 CM & GApps zips) or an endless blue android boot screen (with 5/20 CM & GApps zips). I've tried re-downloading the zips and reinstalling after wiping (dalvik, system, data, cache) multiple times.
Any ideas?
Click to expand...
Click to collapse
I've had similar issues; all with Google apps. When I see it, I delete the Google app in question and then immediately re-install from the App store. Once I've done that, I haven't had the Google app force quit again.
alexclang said:
I've had similar issues; all with Google apps. When I see it, I delete the Google app in question and then immediately re-install from the App store. Once I've done that, I haven't had the Google app force quit again.
Click to expand...
Click to collapse
Got it working after I realized the OP specifically mentioned the "nano" GApps variant; booted fine after a clean install of CM13 & the nano zip.
Issues w. CM13 flash
Ok... slightly frustrated here.
Basic issue: Have flashed CM13 (Nightly 5.17.16) along with the latest Gapps. Upon reboot my phone will go to the Cyanagenmod splash screen, appear to load for several seconds, and then restart. It keeps doing this for at least 10 minutes until I turn it off. I have re-flashed a couple times after reloading the backup but no change.
Process I used: First of all my phone already has Android 6.0.1 firmware installed (not sure if that's an issue). I have TWRP setup as recovery and rooted with su 2.52 (and yes I verified the root prior to flashing). To flash I boot into recovery (obviously), factory reset, install cm13, clear dalvik, and repeat process with gapps. I've done this before with older CM's successfully but for some reason I can't get past the CM splash screen.
Any assistance is appreciated. If I have made a completely stupid error in my process or this exact issue is covered in another thread don't hesitate to point that out!!
Thank you in advance.
smspenc said:
Ok... slightly frustrated here.
Basic issue: Have flashed CM13 (Nightly 5.17.16) along with the latest Gapps. Upon reboot my phone will go to the Cyanagenmod splash screen, appear to load for several seconds, and then restart. It keeps doing this for at least 10 minutes until I turn it off. I have re-flashed a couple times after reloading the backup but no change.
Process I used: First of all my phone already has Android 6.0.1 firmware installed (not sure if that's an issue). I have TWRP setup as recovery and rooted with su 2.52 (and yes I verified the root prior to flashing). To flash I boot into recovery (obviously), factory reset, install cm13, clear dalvik, and repeat process with gapps. I've done this before with older CM's successfully but for some reason I can't get past the CM splash screen.
Any assistance is appreciated. If I have made a completely stupid error in my process or this exact issue is covered in another thread don't hesitate to point that out!!
Thank you in advance.
Click to expand...
Click to collapse
Would boot loop on the latest firmware for me as well; had to Odin back to OK4.
smspenc said:
Ok... slightly frustrated here.
Basic issue: Have flashed CM13 (Nightly 5.17.16) along with the latest Gapps. Upon reboot my phone will go to the Cyanagenmod splash screen, appear to load for several seconds, and then restart. It keeps doing this for at least 10 minutes until I turn it off. I have re-flashed a couple times after reloading the backup but no change.
Process I used: First of all my phone already has Android 6.0.1 firmware installed (not sure if that's an issue). I have TWRP setup as recovery and rooted with su 2.52 (and yes I verified the root prior to flashing). To flash I boot into recovery (obviously), factory reset, install cm13, clear dalvik, and repeat process with gapps. I've done this before with older CM's successfully but for some reason I can't get past the CM splash screen.
Any assistance is appreciated. If I have made a completely stupid error in my process or this exact issue is covered in another thread don't hesitate to point that out!!
Thank you in advance.
Click to expand...
Click to collapse
You had the official MM installed from Samsung, correct?
As far as I know, the current CM13 needs LP bootloader installed.
I have no issue with LP bootloader.
lentm said:
You had the official MM installed from Samsung, correct?
As far as I know, the current CM13 needs LP bootloader installed.
I have no issue with LP bootloader.
Click to expand...
Click to collapse
Yeah that was exactly the issue. Reflashed 5.0 then made the jump and it worked perfectly. So much wasted time...
---------- Post added at 05:28 AM ---------- Previous post was at 05:25 AM ----------
e-j said:
Would boot loop on the latest firmware for me as well; had to Odin back to OK4.
Click to expand...
Click to collapse
Yeah reflashing lollipop then installing cm13 did the trick.
Does this Rom fix Bluetooth issues?
Sent from my SM-G900P using XDA-Developers mobile app
has anyone got themes to work ine keeps crashing
manolze said:
has anyone got themes to work ine keeps crashing
Click to expand...
Click to collapse
Mine works fine with Puzzled UI - CM Theme from Play Store on 5/20 build.
I have no working theme chooser on this releaese
xenokc said:
Works great!
Is there a version of SuperSU that works with CM13? All trash the ROM and have to do full restore.
Click to expand...
Click to collapse
no need just go into developer and turn on root access
---------- Post added at 03:28 PM ---------- Previous post was at 03:24 PM ----------
anyone have a solution to theme chooser yet? i have already fixed phone dial problem and time out of sync problem
xpm69420 said:
no need just go into developer and turn on root access
---------- Post added at 03:28 PM ---------- Previous post was at 03:24 PM ----------
anyone have a solution to theme chooser yet? i have already fixed phone dial problem and time out of sync problem
Click to expand...
Click to collapse
Theme chooser works great for me, not having any issues with it. I am having an issue with the time being or of sync when set to automatic... How'd you fix it? Also, what's wrong with the dialer... can't say I'm having any issues there either.
unclejuju said:
Does this Rom fix Bluetooth issues?
Sent from my SM-G900P using XDA-Developers mobile app
Click to expand...
Click to collapse
I little late here, but CM 13.0 did NOT fix the S5 bluetooth issues. Still have the skipping and studdering.
Android Ice Cold Project
Disclaimer: I take no responsibility for bad things that happen as a result of flashing this.
[ROM]
Download Latest (credits to @c0urier)
(Note: need one more reboot after fresh install for data to work.)
[GAPPS]
Download
Clean installation is encouraged if come from different roms or android versions...
Thanks AICP team for the amazing ROM.
Special thanks to: @DerTeufel1980 , @sbrissen , @rogersb11 , @TheBr0ken , @DreamFX , @frankie, @Option58, @PoisonNinja...
XDA:DevDB Information
AICP, ROM for the Verizon Samsung Galaxy Note II
Contributors
wilson3q
Source Code: http://github.com/LineageOS/android_kernel_samsung_smdk4412
ROM OS Version: 2.3.x Gingerbread
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Created 2017-12-15
Last Updated 2017-12-15
Been running this for a couple days and it's doing well. I did not flash gapps. The biggest issue I have seems to be that apps will crash once the first time they try to access storage. I just reopen the app to do the same task and it works. Sometimes the MTP service crashes when I do something storage related, too. WiFi seems fine, but I haven't had a chance to use Bluetooth or make a call yet.
Thanks for this. Apparently the last ROM I was running on this particular device was a CM build of yours from early last year .
Adding this a couple days later: Wow, battery life has drastically improved over the old CM ROM.
100% Recommended
Just installed this to my Verizon Note 2 SCH-i605.
Running very stable and fast. Definitely better than any ROMS out there.
God bless you!
hi
how to apply it because i'm newer to install custom rooms
I'm having a real good time with this rom. Really brings this ol' girl back to life. I'm also having a real bad time with this rom.
Three issues I'm having so far:
1. Can't send a text. I can get texts in, but when I try to send one out will just say "sending" be then display a notification that it failed.
2. Phone screen turns off on calls and will not come on at all. Power button, home button, prox sensor, nothing gets the screen to come back on. This means I can't hang up and can't press 1 for English.
And 3. Caller ID isn't working at all.
I'm also getting a seemingly random popup saying MTP host failed, or something like that. Not sure if that is related
Any advice on what the problem could be would be splendid.
1. Which carrier to do you use?
2. What APN settings did you use?
This will be easy fix~I have no problems with my rom at the moment.
Dopeskwyd said:
I'm having a real goo1d time with this rom. Really brings this ol' girl back to life. I'm also having a real bad time with this rom.
Three issues I'm having so far:
1. Can't send a text. I can get texts in, but when I try to send one out will just say "sending" be then display a notification that it failed.
2. Phone screen turns off on calls and will not come on at all. Power button, home button, prox sensor, nothing gets the screen to come back on. This means I can't hang up and can't press 1 for English.
And 3. Caller ID isn't working at all.
I'm also getting a seemingly random popup saying MTP host failed, or something like that. Not sure if that is related
Any advice on what the problem could be would be splendid.
Click to expand...
Click to collapse
sideyh said:
Just installed this to my Verizon Note 2 SCH-i605.
Running very stable and fast. Definitely better than any ROMS out there.
God bless you!
Click to expand...
Click to collapse
verizon note 2 on build ND7?
sideyh said:
1. Which carrier to do you use?
2. What APN settings did you use?
This will be easy fix~I have no problems with my rom at the moment.
Click to expand...
Click to collapse
1. The big red V
2. No idea. Just however it came by default. Been on another rom for a few weeks now. If I remember correctly I did go into the *#*#4636*#*# menu and reset VZW's smsc number, but was dismayed like a mofo that it was of no use.
Would love to get this rom running solid, but the screen going black on a call is a major killjoy.
Update:
Loaded this rom again, still no go on the texts. Tried to restore APNs from a backup and got a pop-up saying this version of Android doesn't allow modifying of apn info.
Most of the entries for all four apn options say "not set"
I can't get it to save my APN. It's the country code. It will not let you have 311 it only let's you use APNs that have a 310 country code. I can't even edit it directly and use the 311 country code.
Any idea how I can get around this.? I've seen this in other ROMs before some ROMs just won't work on virtual carriers. And some don't have an problems with the 311 code.
---------- Post added at 04:20 AM ---------- Previous post was at 04:13 AM ----------
Dopeskwyd said:
I'm having a real good time with this rom. Really brings this ol' girl back to life. I'm also having a real bad time with this rom.
Three issues I'm having so far:
1. Can't send a text. I can get texts in, but when I try to send one out will just say "sending" be then display a notification that it failed.
2. Phone screen turns off on calls and will not come on at all. Power button, home button, prox sensor, nothing gets the screen to come back on. This means I can't hang up and can't press 1 for English.
And 3. Caller ID isn't working at all.
I'm also getting a seemingly random popup saying MTP host failed, or something like that. Not sure if that is related
Any advice on what the problem could be would be splendid.
Click to expand...
Click to collapse
Read this. I think you might be needing the base band and build up dates that these guys are talking about and linking to.
https://forum.xda-developers.com/note-2-verizon/development/mj9-radio-t3285280
Already on the mj9. pushed the md7 radio, reflashed the rom, no change. going back to beans 4.1.
Is there anyway I can unlock the ND7 bootloader for this device or is that completely hopeless?
swift5645 said:
Is there anyway I can unlock the ND7 bootloader for this device or is that completely hopeless?
Click to expand...
Click to collapse
Once updated, it is hopeless
stays stuck on aicp logo after flash. wth?
jerryspring said:
stays stuck on aicp logo after flash. wth?
Click to expand...
Click to collapse
the reason is because you swiped after reset.
you should not install any rooting after flashing.
flashing -> reboot WITHOUT rooting option
you shall be fine
sideyh said:
the reason is because you swiped after reset.
you should not install any rooting after flashing.
flashing -> reboot WITHOUT rooting option
you shall be fine
Click to expand...
Click to collapse
I did that. Still same outcome
um..yeah.. ok.. how do you even know what i did after flashing rom? i flashed rom, and rebooted...i have flashed supersu then rom and rebooted, i have tried all ways to flash the rom. keeps on aicp logo animation. i went and flashed stock rom, reunlocked the bootloader and flashed rom again. still doing same. wth? Flashed and waited 3 hours. Something is wrong with this phone.
I know because i made same mistakes and installed same thing multiple times until i figured it out.
If you see AICP logo, you are 99% there.
Did you install Gapp?
sideyh said:
I know because i made same mistakes and installed same thing multiple times until i figured it out.
If you see AICP logo, you are 99% there.
Did you install Gapp?
Click to expand...
Click to collapse
Nothing is writing to partitions... I can't even paste zips onto my phone from my PC. Internal storage on PC shows it's -1046870900. WTH?
---------- Post added at 12:17 PM ---------- Previous post was at 12:15 PM ----------
sideyh said:
Once updated, it is hopeless
Click to expand...
Click to collapse
No it's not. Flash ramc3 firmware
jerryspring said:
Nothing is writing to partitions... I can't even paste zips onto my phone from my PC. Internal storage on PC shows it's -1046870900. WTH?
---------- Post added at 12:17 PM ---------- Previous post was at 12:15 PM ----------
No it's not. Flash ramc3 firmware
Click to expand...
Click to collapse
Use your external micro SD Card for installation.
You don't need to paste ZIP files onto your internal phone from the beginning...Gapp and ZIP files must be stored in microSD Card first.