[Q] Failed to install OTA package - Lenovo P780

I have ROW S226 currently and I am trying to update it S227.
But during the update installation process the Android logo falls flat with Error! and red exclamation work and when the device boots it shows failed to install OTA package.
I tried hard resetting the phone as well cleared eMMC as mentioned somewhere but didn't work out.
Did Factory reset as well but still the same error.
Please Help me out

VhCi said:
I have ROW S226 currently and I am trying to update it S227.
But during the update installation process the Android logo falls flat with Error! and red exclamation work and when the device boots it shows failed to install OTA package.
I tried hard resetting the phone as well cleared eMMC as mentioned somewhere but didn't work out.
Did Factory reset as well but still the same error.
Please Help me out
Click to expand...
Click to collapse
Hi. Did you rooted your phone and removed some apps from system ? Or did you modified something from your rom ? Because if you did so the updates will not work !

stympy said:
Hi. Did you rooted your phone and removed some apps from system ? Or did you modified something from your rom ? Because if you did so the updates will not work !
Click to expand...
Click to collapse
No I haven't rooted my phone. I Just ran into rocvery mode once to hard reset the phone.
And now when I press power+vol up it does not enter recovery mode it keeps on rebooting
And power+vol down says have been in meta....

VhCi said:
No I haven't rooted my phone. I Just ran into rocvery mode once to hard reset the phone.
And now when I press power+vol up it does not enter recovery mode it keeps on rebooting
And power+vol down says have been in meta....
Click to expand...
Click to collapse
Make backup and reflash your firmware, then do an OTA update.
Sent from my Lenovo P780

stympy said:
Make backup and reflash your firmware, then do an OTA update.
Sent from my Lenovo P780
Click to expand...
Click to collapse
My SD card is not detected by the phone. I tried other SD card as well didn't work out. So, can i flash it without it?
It will be very grateful if Can you tell me the steps or thread where can I learn to flash.

VhCi said:
My SD card is not detected by the phone. I tried other SD card as well didn't work out. So, can i flash it without it?
It will be very grateful if Can you tell me the steps or thread where can I learn to flash.
Click to expand...
Click to collapse
I have to ask you something: what rom do you have now? What rom did you have ? Did you flash Jelly Bean rom over KitKat?
If you flashed custom rom made for Jelly Bean (4.2.2) over KitKat(4.4.2), that is why your phone does not seen your SD Card.
Example: You have S220, S222, S224, S226 and you flash over it MIUI you have this kind problems!
To repair you must reflash your stock rom again !
Tell me if i am right and i will shou you how to repair your phone !

stympy said:
I have to ask you something: what rom do you have now? What rom did you have ? Did you flash Jelly Bean rom over KitKat?
If you flashed custom rom made for Jelly Bean (4.2.2) over KitKat(4.4.2), that is why your phone does not seen your SD Card.
Example: You have S220, S222, S224, S226 and you flash over it MIUI you have this kind problems!
To repair you must reflash your stock rom again !
Tell me if i am right and i will shou you how to repair your phone !
Click to expand...
Click to collapse
No. I haven't flashed or rooted my phone. I just updated to Kitkat officially via the OTA update couple of months back. Infact I don't know how to flash or root phones. I currently have ROW S226. The SD card was detected after update to Kitkat(4.4.2) and suddenly one day some error popped up and SD card refrained from being detected.

VhCi said:
No. I haven't flashed or rooted my phone. I just updated to Kitkat officially via the OTA update couple of months back. Infact I don't know how to flash or root phones. I currently have ROW S226. The SD card was detected after update to Kitkat(4.4.2) and suddenly one day some error popped up and SD card refrained from being detected.
Click to expand...
Click to collapse
Did you tried to change your SD Card with another one ?

stympy said:
Did you tried to change your SD Card with another one ?
Click to expand...
Click to collapse
Yes. My SD card is working fine in other phones. Also, I tried SD card that are working in my friends phone but my phone doesn't recognize any :crying:
How do I apply the update?
Is there any another way out to apply the update

Related

[Q] Downgrading from 4.1 to 2.2

I upgraded my LG Optimus One from it's original Froyo 2.2 to the newer Jelly Bean 4.1. The upgrade worked well but now I cannot get on the a mobile network, I cannot connect properly with Bluetooth and I cannot even download apps. My phone has become completely useless. Is there a way I can get it back to it's original 2.2 format?
How did you upgrade it? I guess through cwm recovery? Did you make backup before?
Well you can always do a factory reset and flash a 2.2 or 2.3 Android.
you might try find 2.2 firmware and flash them into your phone
sciepy said:
How did you upgrade it? I guess through cwm recovery? Did you make backup before?
Well you can always do a factory reset and flash a 2.2 or 2.3 Android.
Click to expand...
Click to collapse
Yes I did use clockworkmod recovery to upgrade it. I'm not sure, I thought I did make a backup on my SD card but I can only access it by plugging the card into my computer. I don't have a USB cord and the bluetooth isn't working correctly. I tried a factory reset and it turns out that that does not affect the OS.
CMarie7 said:
Yes I did use clockworkmod recovery to upgrade it. I'm not sure, I thought I did make a backup on my SD card but I can only access it by plugging the card into my computer. I don't have a USB cord and the bluetooth isn't working correctly. I tried a factory reset and it turns out that that does not affect the OS.
Click to expand...
Click to collapse
Try the backup/restore option in cwm and see if it finds your backup.
Other than that see if you can find another (more stable) rom and flash it
misiex2212 said:
you might try find 2.2 firmware and flash them into your phone
Click to expand...
Click to collapse
I am only tech savey to an extent. What do you mean by "flash them to your phone"?
sciepy said:
Try the backup/restore option in cwm and see if it finds your backup.
Other than that see if you can find another (more stable) rom and flash it
Click to expand...
Click to collapse
Only problem with that is that I followed the instructions from a video and when I installed the 4.1 rom it said to make sure I factory restored it so there wouldn't be any problems with things not being compatible. So I do not have the app on my phone anymore. I can install apps but they go straight to my SD card which I can't access on my phone.

[P765] LG Update Tool Error After Flashing JB

Hey All...need your expertise a particular issue that I'm facing. I flashed my P765 offline with the P760 JB kdz. flashed cm10.1. faced some issues so I returned to ICS with my cwm backup. Now when I try to flash either ICS or JB kdz with LG Update tool, it wont do it and I get stuck at 4% and it tells me to connect my phone with my computer - which I have already done (all drivers installed).
Attached is a screenshot and a log from the update tool. Hoping someone can guide me here. BTW - I have uninstalled and re-installed all drivers.
I have the same problem...
Did u try using cwm backups in the forum? If that works, try flashing kdz again n see :good:
Gh0sT.RPG said:
Did u try using cwm backups in the forum? If that works, try flashing kdz again n see :good:
Click to expand...
Click to collapse
Yup....i am on my cwm backup(ics)..tried flashing jb kdz again, but it keeps doing the same thing.
fab0004 said:
Yup....i am on my cwm backup(ics)..tried flashing jb kdz again, but it keeps doing the same thing.
Click to expand...
Click to collapse
Then this s a serious problem, i cant help u further sorry requesting other members to look into this
Is there any way to lock the bootloader? Оr someone upload backup оf JB?
arman4o said:
Is there any way to lock the bootloader? Оr someone upload backup оf JB?
Click to expand...
Click to collapse
hey all...i think I solved it...don't manually put your phone in software mode. Keep it powered on and in LG software mode. flash kdz using update tool and the tool will automatically put the phone in software mode.
arman4o, let me know if this works for ya !!!:good:
Yes It works! Thank you very much! Work on p760
[Solved][P765] LG Update Tool Error After Flashing JB
Glad it helped!!!
fab0004 said:
hey all...i think I solved it...don't manually put your phone in software mode. Keep it powered on and in LG software mode. flash kdz using update tool and the tool will automatically put the phone in software mode.
arman4o, let me know if this works for ya !!!:good:
Click to expand...
Click to collapse
to me does not help. maybe because I unlocked botlooader.
I think that's the problem.
Currently i have :crying:the V10H but I'd be happy to come back again to JB
I think I have Beckup.
i Was trying to wipe the card and i found CWM backup I hope that this is a version of JB
great
fab0004 said:
hey all...i think I solved it...don't manually put your phone in software mode. Keep it powered on and in LG software mode. flash kdz using update tool and the tool will automatically put the phone in software mode.
arman4o, let me know if this works for ya !!!:good:
Click to expand...
Click to collapse
Thats good workaround which solves this new problem. :good:+1
aleksa2210 said:
to me does not help. maybe because I unlocked botlooader.
I think that's the problem.
Currently i have :crying:the V10H but I'd be happy to come back again to JB
I think I have Beckup.
i Was trying to wipe the card and i found CWM backup I hope that this is a version of JB
Click to expand...
Click to collapse
Hey i have an unlocked bootloader too....i actually tried this a second time and it worked...ensure that you have all drivers installed.
Help
I back to v10a, but my MicroSD Card does not work, any idea? My phone is P768g
Thanks!
cmahendra said:
Thats good workaround which solves this new problem. :good:+1
Click to expand...
Click to collapse
LuigiGDL said:
I back to v10a, but my MicroSD Card does not work, any idea? My phone is P768g
Thanks!
Click to expand...
Click to collapse
Format your Sd card with mini partition,with primary not logical option n fat 32 file system. ..
Sent from my LG-P760 using xda premium
solved
I found out what is the problem. My computer has too many USB devices while the power supply is not the brightest. probably due to variations in voltage of 5V I had a problem updating. I disconnected bluetooth and external HDD after which everything is done regularly.
fab0004 said:
hey all...i think I solved it...don't manually put your phone in software mode. Keep it powered on and in LG software mode. flash kdz using update tool and the tool will automatically put the phone in software mode.
arman4o, let me know if this works for ya !!!:good:
Click to expand...
Click to collapse
your are a champion,i was a bit to eager and flashed my wifes p768 with the jelly bean rom for the p760,bad idea,camera did not work anymore and apps like talk came back with error messages.tried to flash it back to ics but that was a no go with the manual option of sw mode,stopped constantly at 15% saying phone or device not connected.tried your option as last resort et voila' it worked like a charm.ics back on the phone
camera working again and no error msg's.
have to say but that the upgrade in general to jb on a lg phone does not seem to be a huge step,when i flashed my galaxy s2 to jelly bean that phone had like a whole new feel about it,feature and smoothness wise.
either way u made my day m8:laugh::good:
sgrurru said:
your are a champion,i was a bit to eager and flashed my wifes p768 with the jelly bean rom for the p760,bad idea,camera did not work anymore and apps like talk came back with error messages.tried to flash it back to ics but that was a no go with the manual option of sw mode,stopped constantly at 15% saying phone or device not connected.tried your option as last resort et voila' it worked like a charm.ics back on the phone
camera working again and no error msg's.
have to say but that the upgrade in general to jb on a lg phone does not seem to be a huge step,when i flashed my galaxy s2 to jelly bean that phone had like a whole new feel about it,feature and smoothness wise.
either way u made my day m8:laugh::good:
Click to expand...
Click to collapse
Happy it worked my friend !!!:good:

[Q] Soft Brick?

Hi,
Today I had a message that I can upgrade something in my d605. So I started upgrade and my phone restarted to CWM. And now it's stuck in restarting to CWM.
So i tried to recover, install new soft and even kdz upgrade. Nothing worked and i'm still rebooting to CWM.
Can anybody help me? I'll be more than grateful.
P.S. My 'old' soft (and original) was 4.4.2 v20B
EDIT: To sum up, it looks like whole OS is missing, no matter what I do, I end up in CWM. Even factory reset does nothing. I don't know what to do...
If CWM works why don't you flash your ROM through it using a flashable zip?
Varcain said:
If CWM works why don't you flash your ROM through it using a flashable zip?
Click to expand...
Click to collapse
I tried doing this with two different ROMs, but nothing happened. I said that new soft wasn't working, by that I meant flashing with CWM.
Ok, so I managed to unbrick my phone using guide on another forum (wich I can't post link to because of policy).
Now I just need to flash new rom, but that's easy. Thanks for (no) help everybody!
I'm sorry for you but Varcain said to not upgrade via OTA if you have cwm
cescom said:
Something like that happened to me few months ago, it was because I entered CWM with vol- + power, during data factory reset cwm said it was because data partition was corrupted;
if you did so, you simply had to go to mount and storage, format data and data/media;
(i know i'm late but if someone will face the same problem i hope this will help him)
Click to expand...
Click to collapse
I did that, but it didn't work for me. Whole boot part was missing, I don't know how this happened.

[Q] Moto E Soak update failed. Help!

Hello,
I am trying to install the soak update manually on my unrooted Moto E with stock recovery.
Downloaded Blur_Version.22.21.32.condor_retaildsds.retaildsdsall.en.03.zip file and kept it in SD card.
System update successfully detected the update.
Started extracting the package.
Asked a reboot.
System entered update mode.
System is being updated message came.
When it reached nearly 30%, the update failed and it restarted automatically.
After booting in to OS, "Update failed. No changes made" message came.
Can anyone kindly help what went wrong here?
Thanks in advance:good:
satham_s said:
Hello,
I am trying to install the soak update manually on my unrooted Moto E with stock recovery.
Downloaded Blur_Version.22.21.32.condor_retaildsds.retaildsdsall.en.03.zip file and kept it in SD card.
System update successfully detected the update.
Started extracting the package.
Asked a reboot.
System entered update mode.
System is being updated message came.
When it reached nearly 30%, the update failed and it restarted automatically.
After booting in to OS, "Update failed. No changes made" message came.
Can anyone kindly help what went wrong here?
Thanks in advance:good:
Click to expand...
Click to collapse
4.4.4 after failed update start normal?
Soak update failed
silent_digger said:
4.4.4 after failed update start normal?
Click to expand...
Click to collapse
Yes I am trying to update from 4.4.4 to 5.0.2.
After it failed, it is again saying ready to update and this continues..
satham_s said:
Yes I am trying to update from 4.4.4 to 5.0.2.
After it failed, it is again saying ready to update and this continues..
Click to expand...
Click to collapse
My E not see these update. I copied to SD to root directory, restart 4 times , and not working .. I have eu retail version ..
Sent from my XT1021 using XDA Free mobile app
Hi,
Buddy if you ever tried to root your phone and then you unrooted and then you complain about this then its waste....
I tried all possible method to root, unroot, unlocked the bootloader, then re locked the bootloader but it won't works sorry bro...
If you know someone in motorola service center then he/she might help you but only if he/she knows you personally or they won't even touch your phone... And also tried this :thumbdown:
Sent from my XT1022 using XDA Free mobile app
Resolved!
pathakkapil1989 said:
Hi,
Buddy if you ever tried to root your phone and then you unrooted and then you complain about this then its waste....
I tried all possible method to root, unroot, unlocked the bootloader, then re locked the bootloader but it won't works sorry bro...
If you know someone in motorola service center then he/she might help you but only if he/she knows you personally or they won't even touch your phone... And also tried this :thumbdown:
Sent from my XT1022 using XDA Free mobile app
Click to expand...
Click to collapse
I found the problem. Now its lollipop 5.0.2 on my Moto E. Yeyyy! Previously I have rooted and unlocked the bootloader. But i was using Stock ROM.(Was using Gravity box for some tweeks.)
So, for lolipop update, I just unrooted and replaced the stock recovery. It detected the update. But while installing the update it failed.
Finally I found the solution. Eventhough you have Stock ROM Since you rooted, Stock recovery will think it is a third party ROM(Unsigned). So you have to replace your Stock ROM also for this soak update.
If anyone need clariffication reply to this post. I will help you further.
Soak update for Moto E is very simple.
silentdogger said:
My E not see these update. I copied to SD to root directory, restart 4 times , and not working .. I have eu retail version ..
Sent from my XT1021 using XDA Free mobile app
Click to expand...
Click to collapse
Dude, Its very simple. You have rooted and unlocked your bootloader. Or using any other ROM not Stock? Then there are some steps you need to follow.
If you haven't done any of the above steps, do this.
1.Connect your Moto E to PC.
2.Copy this download update file "Blur_Version.22.21.32.condor_retaildsds.retaildsdsall.en.03.zip" to SD card directly.(Not inside any folder)
Or
3.You can use ES explorer in your Mobile to copy this file directly to SD card.
4.Update these in play store "Motorola Contexual services" and "Motorola Update services".
5.Goto settings->about->check for updates.
6.You are not good to go further. Click "Yes I'm in".
Still if you face any issue, feel free to conatct me by replying to this post.
Regards,
Satham Hussain
satham_s said:
Hello,
I am trying to install the soak update manually on my unrooted Moto E with stock recovery.
Downloaded Blur_Version.22.21.32.condor_retaildsds.retaildsdsall.en.03.zip file and kept it in SD card.
System update successfully detected the update.
Started extracting the package.
Asked a reboot.
System entered update mode.
System is being updated message came.
When it reached nearly 30%, the update failed and it restarted automatically.
After booting in to OS, "Update failed. No changes made" message came.
Can anyone kindly help what went wrong here?
Thanks in advance:good:
Click to expand...
Click to collapse
Are you sure your battery was at least 70% charged? If it was not, then charge your battery and try again.
Hit Thanks if I helped!
:good:

My P780 does not has signal at all...please help !

My Lenovo P780 does not any signal at all. Please suggest me the solution. I am using Android Version 4.4.2. - Thanks
loshavri said:
My Lenovo P780 does not any signal at all. Please suggest me the solution. I am using Android Version 4.4.2. - Thanks
Click to expand...
Click to collapse
Hi. Your phone is rooted? Any custom recovery like TWRP?
What have you done to the phone?
Did you moved to another region?
By the way... in what country are you in now?
So many variabiles?
Try and dial *#06# and tell me if you see the IMEI's.... Or invalid. This is a precious information.
Send from my Lenovo P1 Vibe Pro
stympy said:
Hi. Your phone is rooted? Any custom recovery like TWRP?
What have you done to the phone?
Did you moved to another region?
By the way... in what country are you in now?
So many variabiles?
Try and dial *#06# and tell me if you see the IMEI's.... Or invalid. This is a precious information.
Send from my Lenovo P1 Vibe Pro
Click to expand...
Click to collapse
Thanks !!!
When dialing *#06#, I can see 2 IMEI's in my phone.
The issue started when I was using the phone in the same reason, Mumbai in India, however now I have moved to another.
The phone is not rooted neither any custom recovery tried.
As far as I can guess, the problem started when I updated phone android version from Jelly Bean to Kitkat however I am not sure.
Should I try downgrading android version of the phone. Please mention how to do that. What else should I try.
Thanks in advance,
loshavri said:
Thanks !!!
When dialing *#06#, I can see 2 IMEI's in my phone.
The issue started when I was using the phone in the same reason, Mumbai in India, however now I have moved to another.
The phone is not rooted neither any custom recovery tried.
As far as I can guess, the problem started when I updated phone android version from Jelly Bean to Kitkat however I am not sure.
Should I try downgrading android version of the phone. Please mention how to do that. What else should I try.
Thanks in advance,
Click to expand...
Click to collapse
Hi.
Ok if you see your phones IMEI is good.
Lets start with first steps:
1. Beacuse this is your last official update to your phone and is quite old you could root your phone.
2. Rooting tutorial with tools and istall TWRP here:http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605 . Use TWRP 2.8.4.0 REV2 ROW if you have ROW version of your phone.
3. Read first act later.
4. After rooting and TWRP install, go to TWRP and do a full backup. NOT OPTIONAL. Save backup to an SD Card.
5. Now go to this post and download all Europa Modems: https://drive.google.com/drive/folders/0B2ORIgaV4iacaFFaM2pnX1A2Rnc
6. Putt all those modems on a folder called Modems.
7. Reboot to TWRP. For this part go to Magazin Play and install Reboot Recovery. Give root rights and reboot in to the recovery.
8. After you are in TWRP go to Install option, browse for your Modem folder, select one modem and swipe to install.
9. After install do not wipe to factory reset. Dont need this factory reset in this tutorial.
10. After install reboot your phone in to system and wait for the signal to appear. Iff by any chance is not working , the install of the modem procedure must be repeted, till one of those modems works.
11. Do not hurry up. Let the phone to find the signal for a minute or two. First time the signal will appear more slow.
12. Good Luck.
I have the same problem. However, my phone doesn't detect SD either, so I can't do the procedure described above. Everything was OK, util I did factory reset. I can also see my IMEI.
oktagon said:
I have the same problem. However, my phone doesn't detect SD either, so I can't do the procedure described above. Everything was OK, util I did factory reset. I can also see my IMEI.
Click to expand...
Click to collapse
In stead of using the sd card, use the imternal memory of the phone.
What happened? Why did you reset the phone? Did you flashed another firmware?
Send from my Lenovo P1 Vibe Pro
stympy said:
In stead of using the sd card, use the imternal memory of the phone.
What happened? Why did you reset the phone? Did you flashed another firmware?
Send from my Lenovo P1 Vibe Pro
Click to expand...
Click to collapse
Thanks, I'll try. I reset it because I gave it to another person, and now that's the problem. I bought it from China, and it worked perfectly for 2 years.
oktagon said:
Thanks, I'll try. I reset it because I gave it to another person, and now that's the problem. I bought it from China, and it worked perfectly for 2 years.
Click to expand...
Click to collapse
It worked with the internal storage?
Send from my Lenovo P1 Vibe Pro
Yes, worked just fine.
Great thread! Flashed an old P780 4GB CH late 2014 with the AOSP ROM the other day and the GiffGaff SIM in it stopped getting a signal. Just flashed Modem_P780_KK_V.103.zip from the Modem Europa folder and now both the GiffGaff and Vectone SIM cards are working perfectly once again.
Thanks stympy!

Categories

Resources