Hi I got my note 4 rooted yesterday and was wondering if I install the xposed module would it slow my phone down? Also I havent installed the CWM/TWRP recovery yet, so if I install xposed moduile would it still work?
Cheers :good:
Ok my bad, posted in the wrong section
If you are going to install xposed you either need to edit your buildprop to secure storage false or you can just install the xposed secure storage fix. Either way you'll be fine after you do it
sawdoctor said:
If you are going to install xposed you either need to edit your buildprop to secure storage false or you can just install the xposed secure storage fix. Either way you'll be fine after you do it
Click to expand...
Click to collapse
Why is that? I installed xposed and it worked fine, didn't do the memory card fix.
wdkingery said:
Why is that? I installed xposed and it worked fine, didn't do the memory card fix.
Click to expand...
Click to collapse
This is the xposed mod
http://forum.xda-developers.com/xposed/modules/app-xshealth-bypass-secure-storage-t2878708
If you are on a custom rom you might have it already in the buildprop
When i installed Xposed, My note 4 became VERY slow, like almost non functioning slow...uninstalled until i see an update or a fix
sawdoctor said:
If you are going to install xposed you either need to edit your buildprop to secure storage false or you can just install the xposed secure storage fix. Either way you'll be fine after you do it
Click to expand...
Click to collapse
Yeah I managed to install Xposed on stock rom, but now I am on a custom ROM which already have Xposed Module built-in.
LNKNPRKFN said:
When i installed Xposed, My note 4 became VERY slow, like almost non functioning slow...uninstalled until i see an update or a fix
Click to expand...
Click to collapse
set secure storage to false .... huh
Just wondering if this is what you mean...
SENT FROM MY CANADIAN NOTE 4
100% Working Fix Private Mode and S Health and Lags
see the video :
https://www.youtube.com/watch?v=m8Zy6kpqlrk
Enjoy :good:
Related
Hello guys, I will show you how to run xposed in official 5.0.2 android.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
D620/r Only!
Installation:
Spep 1: Back Up
Yes Back up in case something goes wrong.
Step 2: Uninstall some LG apps
In order to run Xposed for LP you need to uninstall some LG apps (LG Quickcover and LG Weather)
You can flash This Zip (Thanks to suljo94 for This post), It will automatically remove the apps.
Step 3: Download Xposed
Go to Xposed for LP Thread (By rovo89) and download xposed (Both ZIP and APK) (xposed-v67-sdk21-arm.zip and XposedInstaller_3.0_alpha4.apk)
Step 4: Install Xposed and fix
Add the 3 files to your sd card (xposed helper.zip, XposedInstaller_3.0_alpha4.apk, xposed-v67-sdk21-arm.zip).
Reboot to recovery and start by flashing the fix that removes the LG apps (xposed helper.zip) then install the xposed framework (xposed-v67-sdk21-arm.zip).
Ensure that everything flashed correctly and move to the next step
Step 5: Prepare System
Reboot System and wait for your system to be updated.
When it finishes you will get a "Low on space error" and you will not be able to install any apps. Well thats normal.
Step 6: Fix low on space error
Reboot to Recovery again and wipe dalvik and cache.
Reboot System again. This time it will take longer for the system to be updated so be patient.
Step 7: Install the Xposed App
download root explorer if you dont have it already (Because stock File Manager will throw a FC) and browse to your sd card. Then find and install the Xposed apk file (XposedInstaller_3.0_alpha4.apk).
Reboot one more time and you are ready to go!
Bugs:
android.com.phone FC if the wifi is enabled. Rovo is working on it, he even released a test version that fixes it its right here (flash it instead of xposed-v67-sdk21-arm.zip and tell me if it works). We hope that the new version with the fix included is near. (Thanks to steffenbakke for pointing it out).
Found anything else? Report it!
Uninstall:
Here you can find xposed-uninstaller-arm.zip flash it and uninstall the xposed apk if you want to remove the framework.
Have you tried it Panagiotis? Is it OK?
katergaris said:
Have you tried it Panagiotis? Is it OK?
Click to expand...
Click to collapse
Of course I tried it it is OK except the file manager's force close
ofr me on the e970 cm12 snapshot, its on red letter saying xposed its not active, but i click and it says witch green letter, xposed v65 is active, i don't know why, im used alpha 3 apk
MexiDroid said:
ofr me on the e970 cm12 snapshot, its on red letter saying xposed its not active, but i click and it says witch green letter, xposed v65 is active, i don't know why, im used alpha 3 apk
Click to expand...
Click to collapse
Yeah I know its a bug don't worry about that
panagiotisden2 said:
Yeah I know its a bug don't worry about that
Click to expand...
Click to collapse
but none of my modules can start, gravity says xposed isn't active
Does lg g4 weather work of replaced? Also how can we get over the absence of smartcover (i have quickwindow cover, it is very useful for me)?
MexiDroid said:
but none of my modules can start, gravity says xposed isn't active
Click to expand...
Click to collapse
Maybe you did something wrong try flashing everything again
cretu01 said:
Does lg g4 weather work of replaced? Also how can we get over the absence of smartcover (i have quickwindow cover, it is very useful for me)?
Click to expand...
Click to collapse
I don't think g4 weather will work the bug is for all lg devices and the quick window will turn on the phone but nothing else...
And what about "Phone" app force closes? I tried to run xposed on v20c vodafone brand, but after I fixed low storage problem, deleted weather and quickcover, the Phone app started constant FCs. After frozing packet that was force closing it's all was fine, xposed runs perfectly, but can't use mobile networks
Sent from my LG-D620 using XDA Free mobile app
I don't have phone FCs . Xposed working with alpha 4 of Installer.
paveu241 said:
I don't have phone FCs . Xposed working with alpha 4 of Installer.
Click to expand...
Click to collapse
lucky you
there are com.android.phone FCs even if only xposed framework has intsalled
Hmm... I first installed Xposed Installer, then framework. Try that.
paveu241 said:
Hmm... I first installed Xposed Installer, then framework. Try that.
Click to expand...
Click to collapse
all modules working fine?
Yes, all modules working, but... After half of hour I have phone FC. Problem is in framework
panagiotisden2 said:
Hello guys, I will show you how to run xposed in official 5.0.2 android.
Click to expand...
Click to collapse
Which version do you have? Mine d620r have phone FC's with d620 stock image.
The new Xposed version is bootlooping my phone.... With previous versions i used to have the above mentioned bugs but with this it doesn't even install correctly.
well after some hours i started to get phone force closes too reboot is fixing it for a while but it starts again... i will try to find a fix for that and if anyone can find a fix before me please post it here or send it to me via pm to update the thread.
Thank you
Tse™ said:
The new Xposed version is bootlooping my phone.... With previous versions i used to have the above mentioned bugs but with this it doesn't even install correctly.
Click to expand...
Click to collapse
bootloop? i never got bootloops with the 3 last versions of xposed installed on my d620r you can try installing it all over again and also try wiping dalvik and cache before flashing the framework
@panagiotisden2, there is no fix at this time :/ Problem is with framework, which conflicts with Google Services, location services and phone services. If you still have L with Xposed and phone FCs, please log it and send with description to rovo in official discusion thread for Xposed.
I'm running Greenify 2.7 beta 4 on BlissPop-v3.7-vs985-OFFICIAL-20150803-0536 (Verizon LG G3) with Xposed for 5.1, but for some reason every time I try to enable an option that uses Xposed in Greenify it tells me to activate the module and reboot... only I've already done those things plenty of times. I can't get it to recognize Xposed even though I can get other modules to work just fine. Is there anything I can do?
I have the same problem. I wish I could get it to work.
Actually, I got it to work by updating to the latest alpha of Xposed Installer (3.0 alpha 4 at the time)
Sent from my LG-VS985 using XDA Free mobile app
i am using alpha 4, but having the same problem... in xposed log i get:
Code:
Cannot load any modules because /data/data/de.robv.android.xposed.installer/conf/modules.list was not found
Other modules work, but i have uninstalled them anyway in an effort to fix the problem. Ths is on AryaRom for Galaxy Note 3. Yes it is Samsubg so i am using the official xposed framework, BUT ID DID NOT have this problem before i flashed this ROM. It was working while i was on Omega Rom
Hey buddy, it's just simple.
Follow the steps:
1.Go to xposed framework app.
2. Go to modules. (From menu at right top corner)
3.Then just enable greenify.
Comment me if it solved your problem.
Valkura said:
I'm running Greenify 2.7 beta 4 on BlissPop-v3.7-vs985-OFFICIAL-20150803-0536 (Verizon LG G3) with Xposed for 5.1, but for some reason every time I try to enable an option that uses Xposed in Greenify it tells me to activate the module and reboot... only I've already done those things plenty of times. I can't get it to recognize Xposed even though I can get other modules to work just fine. Is there anything I can do?
Click to expand...
Click to collapse
Just went through this. Go to Xposed installer/Modules and you'll see greenify. Click on the module and reboot =) enjoy. Also 3 of the options in greenify Xposed will soft reboot the device, just a heads up
It tries to load the framework and then it says Gravitybox has stopped working, it will close now.
The same problem as here:
http://forum.xda-developers.com/showthread.php?t=2529641
That fix didn't work for me.
Doesn't work on stock ROM
Sent from my Pixel C using Tapatalk
xposed and gravitybox also work sin stock rom.
use xposed v 82 sdk 32
and before you flash it use selinuxmodechanger.
you also can read it on the xposed thread.
xposed needs permissive selinux mode
and our kernel has enforcing mode. thats why it dont work
I have Xposed already installed.
skeleton1911 said:
xposed and gravitybox also work sin stock rom.
use xposed v 82 sdk 32
and before you flash it use selinuxmodechanger.
you also can read it on the xposed thread.
xposed needs permissive selinux mode
and our kernel has enforcing mode. thats why it dont work
Click to expand...
Click to collapse
Hi
Rooted stock rom.
From the official xposed xda page, I installed xposed installer, then flashed framework sdk23 (marshmallow), arm64 v84.
Xposed says 'not compatible with sdk version 23 or your processor architecture (arm64-v8a)'.
Is it the selinuxmodechanger that i haven't installed (yet) or will v84 not work anyway?
arlrb said:
Hi
Rooted stock rom.
From the official xposed xda page, I installed xposed installer, then flashed framework sdk23 (marshmallow), arm64 v84.
Xposed says 'not compatible with sdk version 23 or your processor architecture (arm64-v8a)'.
Is it the selinuxmodechanger that i haven't installed (yet) or will v84 not work anyway?
Click to expand...
Click to collapse
You're using the wrong version of xposed installer, you need v3.0-beta4.
Jonny said:
You're using the wrong version of xposed installer, you need v3.0-beta4.
Click to expand...
Click to collapse
Thank you, Jonny.
In case anyone else runs into this problem, it's the material design version by DVDandroid.
If you have any other version already installed, uninstall it first.
arlrb said:
Thank you, Jonny.
In case anyone else runs into this problem, it's the material design version by DVDandroid.
If you have any other version already installed, uninstall it first.
Click to expand...
Click to collapse
So, you downloaded the app and clicked on INSTALL/UPDATE with framework "xposed-v84-sdk23-amd64" and that's it?
xposed Qs
llucax said:
So, you downloaded the app and clicked on INSTALL/UPDATE with framework "xposed-v84-sdk23-arm64" and that's it?
Click to expand...
Click to collapse
Yes, that was it. It will auto-shutdown & auto-flash in TWRP, then restart & it should be done.
However, xposed installer says, in green, that sdk23 arm64 is active, yet, i'm not sure if a couple of modules i've tried are working properly/at all.
Minminguard module (ad blocker) for instance says that xposed is not enabled, & sure enough ads are still popping up in apps & in chrome.
So i'm wondering if certain modules won't work seeing as i'm using the latest installer & sdk/64? ie do the module developers need to keep up?
Can someone shed some light on how it works in that respect?
Should i try the 32bit sdk? (all 32bit sdks will work on a 64bit cpu, won't they?)
Or should i try a different version - 82?
Is there a version that is most reliable for most modules?
Same results in here, I guess we have to change the SELinux mode somehow for it to work according to what I've read somewhere else...
llucax said:
Same results in here, I guess we have to change the SELinux mode somehow for it to work according to what I've read somewhere else...
Click to expand...
Click to collapse
As skeleton1911 wrote "and before you flash it use selinuxmodechanger". That fixed most of my problems, I also use xposed V84, haven't tried V85 though
there is a solution for xposed by skeleton1911
---------- Post added at 02:25 PM ---------- Previous post was at 02:22 PM ----------
skeleton1911 said:
Guys
there is a solution for xposed:
1. with mixplorer go to system/etc/init.d/ 07permissive and open it with editor (just tap on it)
2. remove the sleep 60 line. save and reboot to recovery
3. flash xposed framework , reboot and install xposed app and your modules. enable them in xposed app and reboot (normal xposed procedure)
4. open your apps like gravitybox etc.. ( they will connect to the xposed framework now)
5. open 07permissive again in system/etc/init.d and add sleep 60 into it again
6. save and reboot
Done!
in short words:
the cause is permissive and enforcing. Xposed only run in permissive mode on boot , but permissive mode forces some apps to close , but it is needed for viper v4a so i did this init.d script, system boots in enforcing and after 60 sec it will switch to permissive.
this is a dirty but working method. there is no other way at the moment because elephone didnt released the kernel source to modify it..
1. remove sleep 60 in 07permissive , save and reboot
2.perform the xposed stuff and after reboot open all xposed apps so they can connect to the xposed framework
3. add sleep 60 back into 07permissive and reboot
All works now!
cheers!
p.s: I will make a flashable zip for that soon
Click to expand...
Click to collapse
Do it anybody probe it? Maybe Do it working?
That's for his custom rom. For the stock rom you need selinuxmodechanger, set it to permissive and soft reboot via xposed. It will work fine then!
Aha, thanks, I didn't know what is the difference
Jtig said:
That's for his custom rom. For the stock rom you need selinuxmodechanger, set it to permissive and soft reboot via xposed. It will work fine then!
Click to expand...
Click to collapse
Mmm, OK, maybe is the soft reboot what I missed, because I used selinuxmodechanger and it didn't work with a full reboot. I am using stock but with RodriguezMod, but I think I will try the Eragon ROM. I'll report back. Thanks!
I'm finally trying the Eragon ROM, and following the steps from skeleton1911 finally seem to be working! At least Amplify for the first time is not complaining about not having Xposed. So I wiped, flashed the ROM, updated the SuperSU binary, rebooted, remove the sleep from the init.d script, went to the Xposed installer Material beta, updated from v82 to v85 using the installer, and after that flash, Amplify started to recognize Xposed!
Jtig said:
That's for his custom rom. For the stock rom you need selinuxmodechanger, set it to permissive and soft reboot via xposed. It will work fine then!
Click to expand...
Click to collapse
That fixed it, thanks.
Hello guys!
If you update to the latest Magisk version (v16.4), you will notice that it will now pass SafetyNet check.
Check attached screenshots!
rzarectha said:
Hello guys!
If you update to the latest Magisk version (v16.4), you will notice that it will now pass SafetyNet check.
Check attached screenshots!
Click to expand...
Click to collapse
Thats nice to know. I mean i havent used magisk yet (on previous phone it didnt work at all). Currently still on supersu. But its good to know that it works again, so i might switch in the future.
Sent from my ZTE A2017G running V1.2.0B08 using XDA Labs
GodOfPsychos said:
Thats nice to know. I mean i havent used magisk yet (on previous phone it didnt work at all). Currently still on supersu. But its good to know that it works again, so i might switch in the future.
Sent from my ZTE A2017G running V1.2.0B08 using XDA Labs
Click to expand...
Click to collapse
I think it's just as good as SuperSU in handling root apps. The way Magisk stands out though is the modules. I would recommend that you install only the magisk manager (it does not mess with anything in your phone if you just install it), and browse through the list of modules it has. It's very similar to the way modules in xposed look like. Maybe you can find some interesting functionality in there.
I am using the greenify module (works much like boost mode on xposed), busybox, adblocker, systemiser (turns user apps in sys apps), debloater (completely uninstall user apps). There's a ton of mods though, I don't even understand what most actually do.
Keep in mind that having xposed installed will break safetynet no matter what. Magisk can't hide it.
rzarectha said:
I think it's just as good as SuperSU in handling root apps. The way Magisk stands out though is the modules. I would recommend that you install only the magisk manager (it does not mess with anything in your phone if you just install it), and browse through the list of modules it has. It's very similar to the way modules in xposed look like. Maybe you can find some interesting functionality in there.
I am using the greenify module (works much like boost mode on xposed), busybox, adblocker, systemiser (turns user apps in sys apps), debloater (completely uninstall user apps). There's a ton of mods though, I don't even understand what most actually do.
Keep in mind that having xposed installed will break safetynet no matter what. Magisk can't hide it.
Click to expand...
Click to collapse
Edit: i moved this issue to the Q&A and help section since more issues keep coming
https://forum.xda-developers.com/axon-7/help/finally-decided-to-switch-supersu-to-t3787201
just switched to latest stock rom (1.2.0 B10) and installed magisk (16.4). it works and safetynet passes. the problem i got now is that the greenify module fails to install in magisk (see screenshot)
do i gotta flash the module through TWRP maybe? still a newbie to magisk since the axon 7 is the first phone to have it working
EDIT: for some reason magisk doesn't remember which apps have requested root after a reboot. everytime i reboot i get a prompt to allow root access to all my root apps (like greenify). idk why this is happening. i mean, root itself is working as it should. i already uninstalled bloatware and disabled/freezed things like the powermanagement
I'm interested in knowing where Magisk is at
Hi guys is xposed framework running fine on Honor 10 with latest EMUI?
leAndroid91 said:
Hi guys is xposed framework running fine on Honor 10 with latest EMUI?
Click to expand...
Click to collapse
Are you referring to pie emui? Then no. If it is 8.1 yes it is working fine and I'm using it currently
fosterqaz11 said:
Are you referring to pie emui? Then no. If it is 8.1 yes it is working fine and I'm using it currently
Click to expand...
Click to collapse
yes, i'm referring to 8.1.
so you just flashed the latest sdk27 arm64 xposed.zip with TWRP then?
yes, i'm referring to 8.1
so you just flashed the latest sdk27 arm64 xposed.zip with TWRP?
sorry for the dump question but that's my first non-AOSP phone so i want to be sure
leAndroid91 said:
yes, i'm referring to 8.1
so you just flashed the latest sdk27 arm64 xposed.zip with TWRP?
sorry for the dump question but that's my first non-AOSP phone so i want to be sure
Click to expand...
Click to collapse
Sorry I don't flash xposed directly to system. I don't want my system to be messy ?.
I used magisk version which is easier to control since that way I can disable xposed when I have to use Google pay
I recommend you to also use magisk module one, safer and better
fosterqaz11 said:
Sorry I don't flash xposed directly to system. I don't want my system to be messy .
I used magisk version which is easier to control since that way I can disable xposed when I have to use Google pay
I recommend you to also use magisk module one, safer and better
Click to expand...
Click to collapse
i now downloaded & installed the xposed module by magisk manager.
but after rebooting the xposed installer says "Xposed-Framework Version 90-beta3 is installed, but not active. Please see Logs for Details."
but when trying to see the logs it only shows "Cannot read log/data/user_de/0/de.robv.android.xposed.installer/log/error.log no such file or directory"
i just have a file called "log" in root directory, but no folder.
do you know what happend there?
leAndroid91 said:
i now downloaded & installed the xposed module by magisk manager.
but after rebooting the xposed installer says "Xposed-Framework Version 90-beta3 is installed, but not active. Please see Logs for Details."
but when trying to see the logs it only shows "Cannot read log/data/user_de/0/de.robv.android.xposed.installer/log/error.log no such file or directory"
i just have a file called "log" in root directory, but no folder.
do you know what happend there?
Click to expand...
Click to collapse
Force stop xposed installer and clear xposed app data and cache.
Reboot phone and let me know
fosterqaz11 said:
Force stop xposed installer and clear xposed app data and cache.
Reboot phone and let me know
Click to expand...
Click to collapse
did a reboot in the meantime but without stopping the app and clearing data and cache.
don't know why but that 2nd reboot did the trick.
thanks!
leAndroid91 said:
did a reboot in the meantime but without stopping the app and clearing data and cache.
don't know why but that 2nd reboot did the trick.
thanks!
Click to expand...
Click to collapse
Cheers