[GUIDE]Xposed for official 5.0.2 - LG G2 Mini

Hello guys, I will show you how to run xposed in official 5.0.2 android.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
D620/r Only!
Installation:
Spep 1: Back Up
Yes Back up in case something goes wrong.
Step 2: Uninstall some LG apps
In order to run Xposed for LP you need to uninstall some LG apps (LG Quickcover and LG Weather)
You can flash This Zip (Thanks to suljo94 for This post), It will automatically remove the apps.
Step 3: Download Xposed
Go to Xposed for LP Thread (By rovo89) and download xposed (Both ZIP and APK) (xposed-v67-sdk21-arm.zip and XposedInstaller_3.0_alpha4.apk)
Step 4: Install Xposed and fix
Add the 3 files to your sd card (xposed helper.zip, XposedInstaller_3.0_alpha4.apk, xposed-v67-sdk21-arm.zip).
Reboot to recovery and start by flashing the fix that removes the LG apps (xposed helper.zip) then install the xposed framework (xposed-v67-sdk21-arm.zip).
Ensure that everything flashed correctly and move to the next step
Step 5: Prepare System
Reboot System and wait for your system to be updated.
When it finishes you will get a "Low on space error" and you will not be able to install any apps. Well thats normal.
Step 6: Fix low on space error
Reboot to Recovery again and wipe dalvik and cache.
Reboot System again. This time it will take longer for the system to be updated so be patient.
Step 7: Install the Xposed App
download root explorer if you dont have it already (Because stock File Manager will throw a FC) and browse to your sd card. Then find and install the Xposed apk file (XposedInstaller_3.0_alpha4.apk).
Reboot one more time and you are ready to go!
Bugs:
android.com.phone FC if the wifi is enabled. Rovo is working on it, he even released a test version that fixes it its right here (flash it instead of xposed-v67-sdk21-arm.zip and tell me if it works). We hope that the new version with the fix included is near. (Thanks to steffenbakke for pointing it out).
Found anything else? Report it!
Uninstall:
Here you can find xposed-uninstaller-arm.zip flash it and uninstall the xposed apk if you want to remove the framework.

Have you tried it Panagiotis? Is it OK?

katergaris said:
Have you tried it Panagiotis? Is it OK?
Click to expand...
Click to collapse
Of course I tried it it is OK except the file manager's force close

ofr me on the e970 cm12 snapshot, its on red letter saying xposed its not active, but i click and it says witch green letter, xposed v65 is active, i don't know why, im used alpha 3 apk

MexiDroid said:
ofr me on the e970 cm12 snapshot, its on red letter saying xposed its not active, but i click and it says witch green letter, xposed v65 is active, i don't know why, im used alpha 3 apk
Click to expand...
Click to collapse
Yeah I know its a bug don't worry about that

panagiotisden2 said:
Yeah I know its a bug don't worry about that
Click to expand...
Click to collapse
but none of my modules can start, gravity says xposed isn't active

Does lg g4 weather work of replaced? Also how can we get over the absence of smartcover (i have quickwindow cover, it is very useful for me)?

MexiDroid said:
but none of my modules can start, gravity says xposed isn't active
Click to expand...
Click to collapse
Maybe you did something wrong try flashing everything again

cretu01 said:
Does lg g4 weather work of replaced? Also how can we get over the absence of smartcover (i have quickwindow cover, it is very useful for me)?
Click to expand...
Click to collapse
I don't think g4 weather will work the bug is for all lg devices and the quick window will turn on the phone but nothing else...

And what about "Phone" app force closes? I tried to run xposed on v20c vodafone brand, but after I fixed low storage problem, deleted weather and quickcover, the Phone app started constant FCs. After frozing packet that was force closing it's all was fine, xposed runs perfectly, but can't use mobile networks
Sent from my LG-D620 using XDA Free mobile app

I don't have phone FCs . Xposed working with alpha 4 of Installer.

paveu241 said:
I don't have phone FCs . Xposed working with alpha 4 of Installer.
Click to expand...
Click to collapse
lucky you
there are com.android.phone FCs even if only xposed framework has intsalled

Hmm... I first installed Xposed Installer, then framework. Try that.

paveu241 said:
Hmm... I first installed Xposed Installer, then framework. Try that.
Click to expand...
Click to collapse
all modules working fine?

Yes, all modules working, but... After half of hour I have phone FC. Problem is in framework

panagiotisden2 said:
Hello guys, I will show you how to run xposed in official 5.0.2 android.
Click to expand...
Click to collapse
Which version do you have? Mine d620r have phone FC's with d620 stock image.

The new Xposed version is bootlooping my phone.... With previous versions i used to have the above mentioned bugs but with this it doesn't even install correctly.

well after some hours i started to get phone force closes too reboot is fixing it for a while but it starts again... i will try to find a fix for that and if anyone can find a fix before me please post it here or send it to me via pm to update the thread.
Thank you

Tse™ said:
The new Xposed version is bootlooping my phone.... With previous versions i used to have the above mentioned bugs but with this it doesn't even install correctly.
Click to expand...
Click to collapse
bootloop? i never got bootloops with the 3 last versions of xposed installed on my d620r you can try installing it all over again and also try wiping dalvik and cache before flashing the framework

@panagiotisden2, there is no fix at this time :/ Problem is with framework, which conflicts with Google Services, location services and phone services. If you still have L with Xposed and phone FCs, please log it and send with description to rovo in official discusion thread for Xposed.

Related

[LP][23.1.A.0.690][LB/UB] Mini/Full Debloat Flashable [Xposed, Play Store, No FC's]

This is my attempt to help those who are on Lollipop and want Xposed working while not having any FC's. This also keeps the Play Store working. No "Your device is not compatible with this version" message in the store. I made 2 versions. One that removes the stock keyboard, one that doesn't. Also, if you don't want to remove the priv-apps, you can delete it from the zip by opening it with 7zip. I say this because I messed up the script and it only deleted files from /system/app but still booted fine. Also booted fine multiple times after, without having to clear cache. The file is only 500kb. Enjoy!!!
My phone is the Z3(6603), running LP(23.1.A.0.690), US Version, Locked Bootloader.
This should work for anyone using the same LP version on the Z series, but no guarantees since I only have the 6603 Z3 model.
Requirements:
Lollipop (23.1.A.0.690)
TWRP Recovery
Downloads:
z3_mini_debloat_for_xposed_no_kb**this WILL remove the stock keyboard, be sure to have an alternative installed
z3_mini_debloat_for_xposed_with_kb**this will NOT delete the stock keyboard
(added 5/17/15)
Z3_Full_Debloat_no_kb**this WILL remove the stock keyboard, be sure to have an alternative installed
Xposed Files
UPDATE-SuperSU-v2.46.zip
**BACKUP BEFORE ATTEMPTING**
**I ASSUME NO RESPONSIBILITY**
**FLASH AT YOUR OWN RISK**
How to (fresh install):
1. Backup (I cannot express this enough)
2. Do a full wipe
3. Flash a prerooted LP
4. Reboot into system
5. Run byeselinux for recovery fix
6. Let it reboot into system
(INSTALL A KEYBOARD AT THIS POINT, IF USING THE NO KEYBOARD VERSION)
7. Reboot into recovery
8. Flash one of the zips below (do not reboot)
9. Flash xposed arm
10. Clear cache and dalvik-cache
11. Reboot into system
12. Install xposed apk and your modules, reboot after enabling modules
How to (dirty install):
(INSTALL A KEYBOARD, IF USING THE NO KEYBOARD VERSION)
1. Backup (I cannot express this enough)
2. Flash one of the zips below (do not reboot)
3. Flash xposed arm
4. Clear cache and dalvik-cache
5. Reboot into system
6. Install xposed apk and your modules, reboot after enabling modules
Known Issues
1. Some modules will cause boot loops. I recommend enabling one at a time and rebooting after each one. Start with the modules you want the most, first.
Bootloop fix for bad module besides a cache clear:
When you see the "ANDROID" logo after the Sony logo, press Volume Down or Up repeatedly, and fast, until you feel a long vibrate after the short ones. This disables the xposed from running its framework. I just figured this out by accident. So as far as I know, the only way to re-enable it is to navigate to "/data/data/de.robv.android.xposed.installer/conf" and delete the disable file. Just be sure to disable the module from the xposed app afterwards.
Not Working Modules:
None are giving me an issue with boot loops. However, this is because of the full debloat. Doing the mini will cause random modules to cause boot loops.
View the apps that are removed...
Mini Version:
files removed from "/system/app"
AnonymousData
Books
Chrome
com.sonyericsson.xhs
com.sonymobile.xperialounge.services
Drive
EditorsDocs
EnchantedForest
ExperienceFlow2LiveWallpaper
ExternalKeyboardJP (Only in the no keyboard zip)
ExternalKeyboardsInternational(Only in the no keyboard zip)
Hangouts
HoloSpiralWallpaper
Keep
Lifelog-googlePreloadLive-release-2.4.P.1.4
Music2
NewsWeather
Newsstand
PlayGames
PlusOne
SomcPOBox(Only in the no keyboard zip)
SonyEntrance
talkback
textinput-chn(Only in the no keyboard zip)
textinput-tng(Only in the no keyboard zip)
Videos
WeatherWidget-release
WikipediaPlugin
WorldClockWidget-release
YouTubeKaraokePlugin
files removed from "/system/priv-app"
CivilAlerts
com.bambuser.sociallive
Exchange2
FBCalendarSync
filecommander
GoogleBackupTransport
helpapp
MyXperia
retaildemo
SEMCFacebookProxy
SOMCTwitterAccount
SemcEmail
SocialEngineCore
SocialEngineFacebookPlugin
SocialEnginePicasaPlugin
SomcPodcast
SonyEntrance2
TagGoogle
youtubelive
Full Version (not listed, but also includes all from mini):
/system/app
BasicDreams
CityIdPermission
CrashMonitor
CrashMonitorSystem
cover-widget
DeviceConfigTool
DrmDialogs
DrmUI
DualShockManager
FaceLock
Galaxy4
GoogleLyricsPlugin
GoogleTTS
Initial-boot-setup
IntelligentBacklight
IntelligentRotation
KeyChain
NoiseField
PartnerBookmarksProvider
PhaseBeam
PhotoSlideshow
PhotoTable
PhotoWidget-release
RecommendationEngineExtension
RemoteControlService
SemcMetadataCleanup
SemcSimDetection
SemcWarrantyTime
sneiaccountmanager
Tasks
TopContactsWidget-release
UnsupportedHeadsetNotifier
VisualizationWallpapers
WirelessControllerManagerService
YouTubePlugin
/system/priv-app
AndroidForWork
BackupRestoreConfirmation
CoverApp
EnterpriseService
InputDevices
livewaremanager
OMAClientProvisioning
ReadyToRun
SEMCSetupWizard
SimlockUnlockApp
SmartcardService
SnpVUStore
SomcMirrorLinkManualSwitch
SomcMirrorLinkServer
SomcMirrorLinkSystem
SomcMovieCreator
SomcPhotoAnalyzer
SomcPlayAnywhere
SomcSeamlessTethering
SomcWifiDisplay
UpdateCenter
usb-mtp-backup-transport
usb-mtp-factoryreset-wrapper
usb-mtp-marlin-wrapper
usb-mtp-update-wrapper
usb-mtp-vendor-extension-service
Velvet
VoiceDialer
VpnDialogs
Save a comment by hitting thanks, if this helped, instead of commenting a "thank you". It will help keep the thread clean. Thanks =)
Working Xposed Modules:(tested and verified)
GravityBox for LP (see note 1)
Battery History XXL
Burnt Toast
Bugs/Notes for modules:
1. GB[LP] - recent apps key invisible when using navbar features
reserved
Screenshots:
Wow nice man, i will make one video about this, can i? Just hope that it will help to others
KiaTheKing said:
Wow nice man, i will make one video about this, can i? Just hope that it will help to others
Click to expand...
Click to collapse
Yea thats fine. Edit your post to add the link, then I'll add it to the screenshot section. Thank you.
redincali said:
Yea thats fine. Edit your post to add the link, then I'll add it to the screenshot section. Thank you.
Click to expand...
Click to collapse
Ok expect it tommorow
Edit: Coming soon hahha
redincali said:
Did you have a stock version of LP before attempting? Was the xposed apk installed before flashing my file? Did you follow the steps exactly? I'm not on Baltic myself but a few posts back, a Baltic user said it was working for them.
Also, I created a thread here for my deodex. Please post any questions/problems there. Thank you
Click to expand...
Click to collapse
@redincali
I am on pre-rooted ..BAL.690 and I am using exposed with byeselinux patch but when I reboot my phone I stuck bootloop.
Now if I will install your zip am I relies to bootloop?
Edit: I flash @redinvali Zip's on to BAL.690 Pre rooted ROM and bomm everything like a old days. Thanks bro.
Are you on a bootloop from my file or from using a different one? Mine hasn't caused any bootloop issues for me.
Im about to do my phone again from a factory reset to see if theres any issues. My Play store was working but now isn't. I think its due to me flashing LP without a reset, only cleared caches. I'll post results when my phone is back up.
~ via Xperia Z3, XDA App
Ok so I'm back from a factory reset. Everything is working, xposed & play store. I checked the store after every reboot to make sure there was no "your device its not compatible" message. This is how I did it...
1. Backed up all my apps with titanium
2. Booted into recovery and did factory reset
3. Flashed a prerooted LP
4. Rebooted into android
5. Went thru initial setup and signed into google (to check store for message)
6. Ran byeselinux (which restarts automatically)
7. Checked Play Store, was ok
8. Installed the Xposed apk
9. Reboot into recovery
10. Flashed mini deodex, xposed fw, & super su zips
11. Cleared cache & dalvik cache
12. Reboot into system
13. Checked Play Store, was ok
14. Rebooted and checked Play Store, was ok (2 time to be sure)
15. Restored apps with Titanium
16. Rebooted and checked Play Store, was ok
17. Enabled all my modules
18. Rebooted and checked Play Store, was ok and all modules running
So if your trying to flash this over an existing system that has been altered already, to get xposed working, then you may experience issues. I recommended backing up your apps, doing a factory reset, reflash your prerooted LP, then follow the steps in OP.
WARNING: BE SURE TO RUN "byeselinux" AFTER A FRESH INSTALL OF PREROOTED LOLLIPOP OR YOUR RECOVERY WILL STAY BROKEN
I didn't have the issue with the Play store before until I started debloating my system. Im going to do it now while checking the Play store to see if removing a specific app causes the issue.
~ via Xperia Z3, XDA App
It seems my store is showing the message again... I haven't touched anything and it was working before my last post. I checked it again to be sure, before debloating, and there it was. So I'm back to trying to figure it out :-/
~ via Xperia Z3, XDA App
Edit:
Disabling all the modules in xposed did not remove the message from the Play Store. I just flashed the mini deodex again. Currently waiting on it to finish optimizing the apps. Then I'll remove the rest of the xposed framework files manually, if the Play Store is still showing the message. So I can determine if the framework for xposed is causing the issue or if its the deodexing causing it. I will figure it out
Great work with the ROM buddy.
Just a quick one, I am wanting to debloat my system. What are the safest apps to delete, or are the ones you listed on the first post still good to delete?
Also in regards to the error message in the play store, I used to develop ROMs for HTC devices, and deodexing the ROM caused this same issuer, bearing mind this was on ICS but still.
If you need any help, feel free to PM me.
russell664 said:
Great work with the ROM buddy.
Just a quick one, I am wanting to debloat my system. What are the safest apps to delete, or are the ones you listed on the first post still good to delete?
Also in regards to the error message in the play store, I used to develop ROMs for HTC devices, and deodexing the ROM caused this same issuer, bearing mind this was on ICS but still.
If you need any help, feel free to PM me.
Click to expand...
Click to collapse
Thank you. I just wish it was working correctly. Thanks for the info about the deodexing. I never had that issue on KK and never used a deodexed version of ICS. As for the apps to remove, I'll post a list of what I removed without causing any FC's (other than the one you get for deleting the apk because it was running in the background).
I just manually removed xposed, restoring the orig files, and it caused a boot loop. Even though I did clear the cache and dalvik. So I flashed the prerooted LP again without a data wipe. Waiting for it to finish booting though app optimization right now.
Edit:
I can confirm that flashing a prerooted LP without a factory reset will not restore your Play Store. The message WILL still be there, even with a cache clear. Will perform a full wipe when I am back from the store and then try to slim the firmware deodex down and see if I can do it without losing the Play Store while still maintaining the use of Xposed.
Still no luck... I was able to get xposed running but was requiring a cache clear before each boot or else a boot loop would occur. Ill keep everyone posted on the situation if I'm able to fix it.
Just to confirm then mate, is it safe to flash this or not?
Eason85 said:
Just to confirm then mate, is it safe to flash this or not?
Click to expand...
Click to collapse
I wouldn't unless u want the message in the app store to say "Your device is not compatible with this version". There are other markets so you can always install them if you want to use this. I may do that for the time being because I enjoy having GravityBox features. Almost any app can be found elsewhere besides the Play Store. Ill update OP to let others know
I would not write your 'My Flashable' off so easily...it worked for me Was suffering from the Xposed bootloop and now its gone. Alls back to normal.
My setup (Sony Z3C):
Came from rooted KK 5.77.
Flashed pre-rooted Lollipop with R/W enabled, based on CE1
Ran 'Byeselinux' for recovery
Flashed 'Xposed.zip'
Installed 'Xposed alpha2'
Resulting in the boot loop.
Followed your guide:
Flashed the 3 files, wipe cache/ Dalvik chache & reboot.
Tested by d/l-ing app from Playstore, installed Amplify from Xposed and all is ok and using Debloater by @gatesjunior to block/freeze apps.
PS: @hzr34 actually said it worked for him in a earlier post, thats why I gave it a try.
Thanks :thumbup:. I'm using it as well. Since my last fresh install, I haven't had the play store issue. Been checking it periodically to see and still no issues (fb messenger was saying not compatible).
~ via Xperia Z3, XDA App
I've been doing some research and I've got a few ideas I'll try tomorrow. They should help narrow down the boot loop caused when installing xposed on a fully stock odex LP rom. Off to bed for now tho, 3am =)
Works Great
Thank you a lot!I missed xposed for lollipop,but it worked like a charm for me! I can confim,also,lucky patcher works great.
Ok, so I did a factory reset and flashed the prerooted LP again. Did the normal stuff for recovery then installed LiveBoot, so I could log the boot even if it crashes. So I installed xposed and got a log from the boot loop it created. Im going to go through it now and see if I can figure out whats causing the boot loop when installing xposed on an odex LP. If anyone else is interested and/or is better at detecting problems from logs, I've uploaded em HERE in a zip. One log is a working boot log, the other is the boot loop version. The only difference, besides the boot loop, is that the working log was from when i had xposed working on my deodex mini version. I hope this helps!

Greenify not recognizing Xposed

I'm running Greenify 2.7 beta 4 on BlissPop-v3.7-vs985-OFFICIAL-20150803-0536 (Verizon LG G3) with Xposed for 5.1, but for some reason every time I try to enable an option that uses Xposed in Greenify it tells me to activate the module and reboot... only I've already done those things plenty of times. I can't get it to recognize Xposed even though I can get other modules to work just fine. Is there anything I can do?
I have the same problem. I wish I could get it to work.
Actually, I got it to work by updating to the latest alpha of Xposed Installer (3.0 alpha 4 at the time)
Sent from my LG-VS985 using XDA Free mobile app
i am using alpha 4, but having the same problem... in xposed log i get:
Code:
Cannot load any modules because /data/data/de.robv.android.xposed.installer/conf/modules.list was not found
Other modules work, but i have uninstalled them anyway in an effort to fix the problem. Ths is on AryaRom for Galaxy Note 3. Yes it is Samsubg so i am using the official xposed framework, BUT ID DID NOT have this problem before i flashed this ROM. It was working while i was on Omega Rom
Hey buddy, it's just simple.
Follow the steps:
1.Go to xposed framework app.
2. Go to modules. (From menu at right top corner)
3.Then just enable greenify.
Comment me if it solved your problem.
Valkura said:
I'm running Greenify 2.7 beta 4 on BlissPop-v3.7-vs985-OFFICIAL-20150803-0536 (Verizon LG G3) with Xposed for 5.1, but for some reason every time I try to enable an option that uses Xposed in Greenify it tells me to activate the module and reboot... only I've already done those things plenty of times. I can't get it to recognize Xposed even though I can get other modules to work just fine. Is there anything I can do?
Click to expand...
Click to collapse
Just went through this. Go to Xposed installer/Modules and you'll see greenify. Click on the module and reboot =) enjoy. Also 3 of the options in greenify Xposed will soft reboot the device, just a heads up

Xposed module Gravitybox not working

It tries to load the framework and then it says Gravitybox has stopped working, it will close now.
The same problem as here:
http://forum.xda-developers.com/showthread.php?t=2529641
That fix didn't work for me.
Doesn't work on stock ROM
Sent from my Pixel C using Tapatalk
xposed and gravitybox also work sin stock rom.
use xposed v 82 sdk 32
and before you flash it use selinuxmodechanger.
you also can read it on the xposed thread.
xposed needs permissive selinux mode
and our kernel has enforcing mode. thats why it dont work
I have Xposed already installed.
skeleton1911 said:
xposed and gravitybox also work sin stock rom.
use xposed v 82 sdk 32
and before you flash it use selinuxmodechanger.
you also can read it on the xposed thread.
xposed needs permissive selinux mode
and our kernel has enforcing mode. thats why it dont work
Click to expand...
Click to collapse
Hi
Rooted stock rom.
From the official xposed xda page, I installed xposed installer, then flashed framework sdk23 (marshmallow), arm64 v84.
Xposed says 'not compatible with sdk version 23 or your processor architecture (arm64-v8a)'.
Is it the selinuxmodechanger that i haven't installed (yet) or will v84 not work anyway?
arlrb said:
Hi
Rooted stock rom.
From the official xposed xda page, I installed xposed installer, then flashed framework sdk23 (marshmallow), arm64 v84.
Xposed says 'not compatible with sdk version 23 or your processor architecture (arm64-v8a)'.
Is it the selinuxmodechanger that i haven't installed (yet) or will v84 not work anyway?
Click to expand...
Click to collapse
You're using the wrong version of xposed installer, you need v3.0-beta4.
Jonny said:
You're using the wrong version of xposed installer, you need v3.0-beta4.
Click to expand...
Click to collapse
Thank you, Jonny.
In case anyone else runs into this problem, it's the material design version by DVDandroid.
If you have any other version already installed, uninstall it first.
arlrb said:
Thank you, Jonny.
In case anyone else runs into this problem, it's the material design version by DVDandroid.
If you have any other version already installed, uninstall it first.
Click to expand...
Click to collapse
So, you downloaded the app and clicked on INSTALL/UPDATE with framework "xposed-v84-sdk23-amd64" and that's it?
xposed Qs
llucax said:
So, you downloaded the app and clicked on INSTALL/UPDATE with framework "xposed-v84-sdk23-arm64" and that's it?
Click to expand...
Click to collapse
Yes, that was it. It will auto-shutdown & auto-flash in TWRP, then restart & it should be done.
However, xposed installer says, in green, that sdk23 arm64 is active, yet, i'm not sure if a couple of modules i've tried are working properly/at all.
Minminguard module (ad blocker) for instance says that xposed is not enabled, & sure enough ads are still popping up in apps & in chrome.
So i'm wondering if certain modules won't work seeing as i'm using the latest installer & sdk/64? ie do the module developers need to keep up?
Can someone shed some light on how it works in that respect?
Should i try the 32bit sdk? (all 32bit sdks will work on a 64bit cpu, won't they?)
Or should i try a different version - 82?
Is there a version that is most reliable for most modules?
Same results in here, I guess we have to change the SELinux mode somehow for it to work according to what I've read somewhere else...
llucax said:
Same results in here, I guess we have to change the SELinux mode somehow for it to work according to what I've read somewhere else...
Click to expand...
Click to collapse
As skeleton1911 wrote "and before you flash it use selinuxmodechanger". That fixed most of my problems, I also use xposed V84, haven't tried V85 though
there is a solution for xposed by skeleton1911
---------- Post added at 02:25 PM ---------- Previous post was at 02:22 PM ----------
skeleton1911 said:
Guys
there is a solution for xposed:
1. with mixplorer go to system/etc/init.d/ 07permissive and open it with editor (just tap on it)
2. remove the sleep 60 line. save and reboot to recovery
3. flash xposed framework , reboot and install xposed app and your modules. enable them in xposed app and reboot (normal xposed procedure)
4. open your apps like gravitybox etc.. ( they will connect to the xposed framework now)
5. open 07permissive again in system/etc/init.d and add sleep 60 into it again
6. save and reboot
Done!
in short words:
the cause is permissive and enforcing. Xposed only run in permissive mode on boot , but permissive mode forces some apps to close , but it is needed for viper v4a so i did this init.d script, system boots in enforcing and after 60 sec it will switch to permissive.
this is a dirty but working method. there is no other way at the moment because elephone didnt released the kernel source to modify it..
1. remove sleep 60 in 07permissive , save and reboot
2.perform the xposed stuff and after reboot open all xposed apps so they can connect to the xposed framework
3. add sleep 60 back into 07permissive and reboot
All works now!
cheers!
p.s: I will make a flashable zip for that soon ​
Click to expand...
Click to collapse
Do it anybody probe it? Maybe Do it working?
That's for his custom rom. For the stock rom you need selinuxmodechanger, set it to permissive and soft reboot via xposed. It will work fine then!
Aha, thanks, I didn't know what is the difference
Jtig said:
That's for his custom rom. For the stock rom you need selinuxmodechanger, set it to permissive and soft reboot via xposed. It will work fine then!
Click to expand...
Click to collapse
Mmm, OK, maybe is the soft reboot what I missed, because I used selinuxmodechanger and it didn't work with a full reboot. I am using stock but with RodriguezMod, but I think I will try the Eragon ROM. I'll report back. Thanks!
I'm finally trying the Eragon ROM, and following the steps from skeleton1911 finally seem to be working! At least Amplify for the first time is not complaining about not having Xposed. So I wiped, flashed the ROM, updated the SuperSU binary, rebooted, remove the sleep from the init.d script, went to the Xposed installer Material beta, updated from v82 to v85 using the installer, and after that flash, Amplify started to recognize Xposed!
Jtig said:
That's for his custom rom. For the stock rom you need selinuxmodechanger, set it to permissive and soft reboot via xposed. It will work fine then!
Click to expand...
Click to collapse
That fixed it, thanks.

[Q] [XPOSED] Issues related with Xposed Framework

I installed xposed (it took around 20 minutes to install) and then installed 5 modules, and when I rebooted I saw that xposed is installed but not active. And when I tried installing xposed on top of it again it didn't do anything, do you know how to fix it?
List of modules installed:
Obb on SD
XInternalSD
Gravitybox MM
XStana
Lucky Patcher
nrokos said:
I installed xposed (it took around 20 minutes to install) and then installed 5 modules, and when I rebooted I saw that xposed is installed but not active. And when I tried installing xposed on top of it again it didn't do anything, do you know how to fix it?
List of modules installed:
Obb on SD
XInternalSD
Gravitybox MM
XStana
Lucky Patcher
Click to expand...
Click to collapse
The same happened to me. I just re-flashed the framework, and it worked. Of course, I waited again around 20 minutes for the phone to boot.
try to soft reboot from xposed
you have framework 86? what your device?
I flash framework 86 but no finish at boot animation, so I flash 85 version and work
my problem same with you after reboot normal, framework can't read so I did soft reboot and worked
ekin_strops said:
The same happened to me. I just re-flashed the framework, and it worked. Of course, I waited again around 20 minutes for the phone to boot.
Click to expand...
Click to collapse
I tried to reinstall the framework and again the same issue, nothing happened but I will try to soft reboot
@nrokos
Check if you have a file "disable" on /data/data/de.robv.android.xposed.installer/conf/
Delete if you have
w. junior said:
@nrokos
Check if you have a file "disable" on /data/data/de.robv.android.xposed.installer/conf/
Delete if you have
Click to expand...
Click to collapse
Thanks mate, fixed it

Official N Xposed is here

https://www.xda-developers.com/official-xposed-framework-android-nougat/
https://forum.xda-developers.com/showthread.php?t=3034811
https://forum.xda-developers.com/xposed/discussion-xposed-nougat-t3685687
Let's share what does/doesn't work
Since I made the post, it's only fair I go first.
On A2017G, stock and updated via OTA to 7.1, the flash was successful. The first boot took ~10 minutes. I will now start testing modules and update this post with what does/doesn't work.
Modules I tried so far:
LP: Works
Amplify Battery Extender: Works
Greenify: Does NOT work - The module is active, however, the app does not seem to be aware that it is.
-I'm looking for the old Youtube Background Playback module. It seems to have been pulled from the download list inside xposed manager. If anyone has a copy of it, it would be great to see if it's still working. The LP patch for background play stopped working for me on 3 different devices about 2 weeks ago.
Great!
Maybe a stupid question, but will installing xposed still break safetynet checks? That was the only benefit of running.g without xposed; aps like horizon / Ziggo Go worked, hate to have to do without it.
TIA,
Cheers,
/Cacti
Sent from my ZTE A2017G using XDA-Developers Legacy app
Amplify can't see wakelock or service...greenfy continue to tell me to activate the module. (I just set on the module and reboot many times)
UPDATE: other users with different device have the same problem, I think we need an update of these apps for working with the new version of exposed.
https://forum.xda-developers.com/xposed/discussion-xposed-nougat-t3685687
Running A2017UV1.1.0B32 (android 7.1.1) rooted by Magisk Version 14.0.
all was good but when installed xposed (SDK 25/API 25) something is wrong;
SafetyNet is faild at check and in Magisk , when pressing Menu->Superuser I get "Magisk Manager has stopped"
but root is working and Xposed modules are working.
mb0 said:
Running A2017UV1.1.0B32 (android 7.1.1) rooted by Magisk Version 14.0.
all was good but when installed xposed (SDK 25/API 25) something is wrong;
SafetyNet is faild at check and in Magisk , when pressing Menu->Superuser I get "Magisk Manager has stopped"
but root is working and Xposed modules are working.
Click to expand...
Click to collapse
I had the magisk FC too. Fixed it by switching to stable channel reinstalling both the zip and the launcher. Safety net is broken with magisk hide setting and the "universal safety net fix" module.
rzarectha said:
I had the magisk FC too. Fixed it by switching to stable channel reinstalling both the zip and the launcher. Safety net is broken with magisk hide setting and the "universal safety net fix" module.
Click to expand...
Click to collapse
Thanks. Not what I wanted to hear but still [emoji4]
Cheers,
/Cacti
Sent from my ZTE A2017G using XDA-Developers Legacy app
@rzarectha thank you, but it didn't help. even tried install beta version;
tried to complete uninstall and install again the zip and apk - it worked and no more FC.
Im also on B32 with Magisk, but currently running the official Xposed for Magisk. Should I use the Xposed uninstaller or just remove and uninstall the Magisk Xposed module before starting with the official Xposed process?
Regarding YouTube background play:
I found the .apk on their github page, it's in the first thread that mentions it being removed from the repo. I tested it and it works!
For whatever reason, I cannot get past a bootloop after installing via TWRP. Interestingly, I can install the unofficial module from back in August. I can uninstall that just fine, but reinstalling the proper one does nothing but bootloop. Anyone else having this problerm?
Could anyone try running Fate Grand Order?
After update to V88 the boot time is longer for 45-50 second on my A2017G with Stock 7.1.1B06. With inofficial V87 boots better
This is what I have setup so far. Crappalinks, YouTube Adaway, XInsta, all work. Greenify doesn't and neither did Amplify, not properly anyway. Also it does break Safety net. We'll have to wait for the Magisk Module
rzarectha said:
Since I made the post, it's only fair I go first.
On A2017G, stock and updated via OTA to 7.1, the flash was successful. The first boot took ~10 minutes. I will now start testing modules and update this post with what does/doesn't work.
Modules I tried so far:
LP: Works
Amplify Battery Extender: Works
Greenify: Does NOT work - The module is active, however, the app does not seem to be aware that it is.
-I'm looking for the old Youtube Background Playback module. It seems to have been pulled from the download list inside xposed manager. If anyone has a copy of it, it would be great to see if it's still working. The LP patch for background play stopped working for me on 3 different devices about 2 weeks ago.
Click to expand...
Click to collapse
why use Xposed for youtube adaway and background player when they make a separate app for that over here https://forum.xda-developers.com/android/apps-games/app-iytbp-injected-youtube-background-t3560900 I have been using this for a while now and it is great
reV17 said:
This is what I have setup so far. Crappalinks, YouTube Adaway, XInsta, all work. Greenify doesn't and neither did Amplify, not properly anyway. Also it does break Safety net. We'll have to wait for the Magisk Module
Click to expand...
Click to collapse
There is a magisk module on the repo but to my knowledge it still breaks safetynet
For those with issues with magisk and xposed, you can't use them both together, if you want to then you have to use the specific xposed magisk module here https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268 also flashing xposed regardless magisk or not its going to break safetynet no matter what. Will explain in that magisk xposed thread.
If someone got problems like me, heres my way i installed it successfully and get everything to work (Magisk!):
- disable xposed modules
- restart to recovery
- install Xposed v88.2 by topjohnwho (from xposed thread) via recovery
- reboot to system (first boot took ~9min)
- install Xposed Installer 3.1.2 for Magisk
- activate modules in xposed installer
- reboot phone and its done.
If you dont deactivate the xposed modules before flashing xposed, you maybe have to reinstall them and maybe set up everything new, if you cant save the settings for the modules. This was happening in my first try. In my second try i disabled them before and activated after flashing and dont have do setup every xposed module again.
A2017G with B06 and Magisk v14.2.
Can you use gravity box module on the stock rom? Is miflavor "close enough" to aosp to be compatible with mods made for that?
rzarectha said:
Can you use gravity box module on the stock rom? Is miflavor "close enough" to aosp to be compatible with mods made for that?
Click to expand...
Click to collapse
Yes. Not all is working, but center clock, battery mod in statusbar, RAM usage in recents, down-/uploadspeed in statusbar and some other things ... enough for me.

Categories

Resources