[Q] [XPOSED] Issues related with Xposed Framework - Sony Xperia M4 Aqua

I installed xposed (it took around 20 minutes to install) and then installed 5 modules, and when I rebooted I saw that xposed is installed but not active. And when I tried installing xposed on top of it again it didn't do anything, do you know how to fix it?
List of modules installed:
Obb on SD
XInternalSD
Gravitybox MM
XStana
Lucky Patcher

nrokos said:
I installed xposed (it took around 20 minutes to install) and then installed 5 modules, and when I rebooted I saw that xposed is installed but not active. And when I tried installing xposed on top of it again it didn't do anything, do you know how to fix it?
List of modules installed:
Obb on SD
XInternalSD
Gravitybox MM
XStana
Lucky Patcher
Click to expand...
Click to collapse
The same happened to me. I just re-flashed the framework, and it worked. Of course, I waited again around 20 minutes for the phone to boot.

try to soft reboot from xposed
you have framework 86? what your device?
I flash framework 86 but no finish at boot animation, so I flash 85 version and work
my problem same with you after reboot normal, framework can't read so I did soft reboot and worked

ekin_strops said:
The same happened to me. I just re-flashed the framework, and it worked. Of course, I waited again around 20 minutes for the phone to boot.
Click to expand...
Click to collapse
I tried to reinstall the framework and again the same issue, nothing happened but I will try to soft reboot

@nrokos
Check if you have a file "disable" on /data/data/de.robv.android.xposed.installer/conf/
Delete if you have

w. junior said:
@nrokos
Check if you have a file "disable" on /data/data/de.robv.android.xposed.installer/conf/
Delete if you have
Click to expand...
Click to collapse
Thanks mate, fixed it

Related

[GUIDE]Xposed for official 5.0.2

Hello guys, I will show you how to run xposed in official 5.0.2 android.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
D620/r Only!
Installation:
Spep 1: Back Up
Yes Back up in case something goes wrong.
Step 2: Uninstall some LG apps
In order to run Xposed for LP you need to uninstall some LG apps (LG Quickcover and LG Weather)
You can flash This Zip (Thanks to suljo94 for This post), It will automatically remove the apps.
Step 3: Download Xposed
Go to Xposed for LP Thread (By rovo89) and download xposed (Both ZIP and APK) (xposed-v67-sdk21-arm.zip and XposedInstaller_3.0_alpha4.apk)
Step 4: Install Xposed and fix
Add the 3 files to your sd card (xposed helper.zip, XposedInstaller_3.0_alpha4.apk, xposed-v67-sdk21-arm.zip).
Reboot to recovery and start by flashing the fix that removes the LG apps (xposed helper.zip) then install the xposed framework (xposed-v67-sdk21-arm.zip).
Ensure that everything flashed correctly and move to the next step
Step 5: Prepare System
Reboot System and wait for your system to be updated.
When it finishes you will get a "Low on space error" and you will not be able to install any apps. Well thats normal.
Step 6: Fix low on space error
Reboot to Recovery again and wipe dalvik and cache.
Reboot System again. This time it will take longer for the system to be updated so be patient.
Step 7: Install the Xposed App
download root explorer if you dont have it already (Because stock File Manager will throw a FC) and browse to your sd card. Then find and install the Xposed apk file (XposedInstaller_3.0_alpha4.apk).
Reboot one more time and you are ready to go!
Bugs:
android.com.phone FC if the wifi is enabled. Rovo is working on it, he even released a test version that fixes it its right here (flash it instead of xposed-v67-sdk21-arm.zip and tell me if it works). We hope that the new version with the fix included is near. (Thanks to steffenbakke for pointing it out).
Found anything else? Report it!
Uninstall:
Here you can find xposed-uninstaller-arm.zip flash it and uninstall the xposed apk if you want to remove the framework.
Have you tried it Panagiotis? Is it OK?
katergaris said:
Have you tried it Panagiotis? Is it OK?
Click to expand...
Click to collapse
Of course I tried it it is OK except the file manager's force close
ofr me on the e970 cm12 snapshot, its on red letter saying xposed its not active, but i click and it says witch green letter, xposed v65 is active, i don't know why, im used alpha 3 apk
MexiDroid said:
ofr me on the e970 cm12 snapshot, its on red letter saying xposed its not active, but i click and it says witch green letter, xposed v65 is active, i don't know why, im used alpha 3 apk
Click to expand...
Click to collapse
Yeah I know its a bug don't worry about that
panagiotisden2 said:
Yeah I know its a bug don't worry about that
Click to expand...
Click to collapse
but none of my modules can start, gravity says xposed isn't active
Does lg g4 weather work of replaced? Also how can we get over the absence of smartcover (i have quickwindow cover, it is very useful for me)?
MexiDroid said:
but none of my modules can start, gravity says xposed isn't active
Click to expand...
Click to collapse
Maybe you did something wrong try flashing everything again
cretu01 said:
Does lg g4 weather work of replaced? Also how can we get over the absence of smartcover (i have quickwindow cover, it is very useful for me)?
Click to expand...
Click to collapse
I don't think g4 weather will work the bug is for all lg devices and the quick window will turn on the phone but nothing else...
And what about "Phone" app force closes? I tried to run xposed on v20c vodafone brand, but after I fixed low storage problem, deleted weather and quickcover, the Phone app started constant FCs. After frozing packet that was force closing it's all was fine, xposed runs perfectly, but can't use mobile networks
Sent from my LG-D620 using XDA Free mobile app
I don't have phone FCs . Xposed working with alpha 4 of Installer.
paveu241 said:
I don't have phone FCs . Xposed working with alpha 4 of Installer.
Click to expand...
Click to collapse
lucky you
there are com.android.phone FCs even if only xposed framework has intsalled
Hmm... I first installed Xposed Installer, then framework. Try that.
paveu241 said:
Hmm... I first installed Xposed Installer, then framework. Try that.
Click to expand...
Click to collapse
all modules working fine?
Yes, all modules working, but... After half of hour I have phone FC. Problem is in framework
panagiotisden2 said:
Hello guys, I will show you how to run xposed in official 5.0.2 android.
Click to expand...
Click to collapse
Which version do you have? Mine d620r have phone FC's with d620 stock image.
The new Xposed version is bootlooping my phone.... With previous versions i used to have the above mentioned bugs but with this it doesn't even install correctly.
well after some hours i started to get phone force closes too reboot is fixing it for a while but it starts again... i will try to find a fix for that and if anyone can find a fix before me please post it here or send it to me via pm to update the thread.
Thank you
Tse™ said:
The new Xposed version is bootlooping my phone.... With previous versions i used to have the above mentioned bugs but with this it doesn't even install correctly.
Click to expand...
Click to collapse
bootloop? i never got bootloops with the 3 last versions of xposed installed on my d620r you can try installing it all over again and also try wiping dalvik and cache before flashing the framework
@panagiotisden2, there is no fix at this time :/ Problem is with framework, which conflicts with Google Services, location services and phone services. If you still have L with Xposed and phone FCs, please log it and send with description to rovo in official discusion thread for Xposed.

Please help my phone is not working after installing resOverloader Module from xposed

Hi Guys,
Please help my phone is not working after installing resOverloader Module from xposed.
when i rebooted my phone it gave me error saying "Process System isn't responding" and gives me 2 option wait and Ok. please help guys
Boot to recovery and flash rom with no wipe
Boot TWRP -> File Manager -> go to /data/data/de.robv.android.xposedinstaller/conf/ press "modules.list", press Delete. Then reboot.
pyler said:
Boot TWRP -> File Manager -> go to /data/data/de.robv.android.xposedinstaller/conf/ press "modules.list", press Delete. Then reboot.
Click to expand...
Click to collapse
This worked like a charm for me. I am using a stock rooted 6.0 rom on my Moto X Pure xt1575 with SuperSU 2.66. Main uses for Xposed are greenify and amplify.
Quick follow up question: after this operation Greenify does not recognize the Xposed installation. I am not sure what else doesn't recognize it because that is all I have noticed. Is there something else that needs to be done to cause the modules list to rebuild?
Edit: although Xposed looks normal and all boxes are checked,, none of the individual programs recognize that Xposed is there.
Second edit: I deleted the modules and reinstalled them,, then rebooted and all was well. Solved.
Thanks!

Greenify not recognizing Xposed

I'm running Greenify 2.7 beta 4 on BlissPop-v3.7-vs985-OFFICIAL-20150803-0536 (Verizon LG G3) with Xposed for 5.1, but for some reason every time I try to enable an option that uses Xposed in Greenify it tells me to activate the module and reboot... only I've already done those things plenty of times. I can't get it to recognize Xposed even though I can get other modules to work just fine. Is there anything I can do?
I have the same problem. I wish I could get it to work.
Actually, I got it to work by updating to the latest alpha of Xposed Installer (3.0 alpha 4 at the time)
Sent from my LG-VS985 using XDA Free mobile app
i am using alpha 4, but having the same problem... in xposed log i get:
Code:
Cannot load any modules because /data/data/de.robv.android.xposed.installer/conf/modules.list was not found
Other modules work, but i have uninstalled them anyway in an effort to fix the problem. Ths is on AryaRom for Galaxy Note 3. Yes it is Samsubg so i am using the official xposed framework, BUT ID DID NOT have this problem before i flashed this ROM. It was working while i was on Omega Rom
Hey buddy, it's just simple.
Follow the steps:
1.Go to xposed framework app.
2. Go to modules. (From menu at right top corner)
3.Then just enable greenify.
Comment me if it solved your problem.
Valkura said:
I'm running Greenify 2.7 beta 4 on BlissPop-v3.7-vs985-OFFICIAL-20150803-0536 (Verizon LG G3) with Xposed for 5.1, but for some reason every time I try to enable an option that uses Xposed in Greenify it tells me to activate the module and reboot... only I've already done those things plenty of times. I can't get it to recognize Xposed even though I can get other modules to work just fine. Is there anything I can do?
Click to expand...
Click to collapse
Just went through this. Go to Xposed installer/Modules and you'll see greenify. Click on the module and reboot =) enjoy. Also 3 of the options in greenify Xposed will soft reboot the device, just a heads up

Xposed module Gravitybox not working

It tries to load the framework and then it says Gravitybox has stopped working, it will close now.
The same problem as here:
http://forum.xda-developers.com/showthread.php?t=2529641
That fix didn't work for me.
Doesn't work on stock ROM
Sent from my Pixel C using Tapatalk
xposed and gravitybox also work sin stock rom.
use xposed v 82 sdk 32
and before you flash it use selinuxmodechanger.
you also can read it on the xposed thread.
xposed needs permissive selinux mode
and our kernel has enforcing mode. thats why it dont work
I have Xposed already installed.
skeleton1911 said:
xposed and gravitybox also work sin stock rom.
use xposed v 82 sdk 32
and before you flash it use selinuxmodechanger.
you also can read it on the xposed thread.
xposed needs permissive selinux mode
and our kernel has enforcing mode. thats why it dont work
Click to expand...
Click to collapse
Hi
Rooted stock rom.
From the official xposed xda page, I installed xposed installer, then flashed framework sdk23 (marshmallow), arm64 v84.
Xposed says 'not compatible with sdk version 23 or your processor architecture (arm64-v8a)'.
Is it the selinuxmodechanger that i haven't installed (yet) or will v84 not work anyway?
arlrb said:
Hi
Rooted stock rom.
From the official xposed xda page, I installed xposed installer, then flashed framework sdk23 (marshmallow), arm64 v84.
Xposed says 'not compatible with sdk version 23 or your processor architecture (arm64-v8a)'.
Is it the selinuxmodechanger that i haven't installed (yet) or will v84 not work anyway?
Click to expand...
Click to collapse
You're using the wrong version of xposed installer, you need v3.0-beta4.
Jonny said:
You're using the wrong version of xposed installer, you need v3.0-beta4.
Click to expand...
Click to collapse
Thank you, Jonny.
In case anyone else runs into this problem, it's the material design version by DVDandroid.
If you have any other version already installed, uninstall it first.
arlrb said:
Thank you, Jonny.
In case anyone else runs into this problem, it's the material design version by DVDandroid.
If you have any other version already installed, uninstall it first.
Click to expand...
Click to collapse
So, you downloaded the app and clicked on INSTALL/UPDATE with framework "xposed-v84-sdk23-amd64" and that's it?
xposed Qs
llucax said:
So, you downloaded the app and clicked on INSTALL/UPDATE with framework "xposed-v84-sdk23-arm64" and that's it?
Click to expand...
Click to collapse
Yes, that was it. It will auto-shutdown & auto-flash in TWRP, then restart & it should be done.
However, xposed installer says, in green, that sdk23 arm64 is active, yet, i'm not sure if a couple of modules i've tried are working properly/at all.
Minminguard module (ad blocker) for instance says that xposed is not enabled, & sure enough ads are still popping up in apps & in chrome.
So i'm wondering if certain modules won't work seeing as i'm using the latest installer & sdk/64? ie do the module developers need to keep up?
Can someone shed some light on how it works in that respect?
Should i try the 32bit sdk? (all 32bit sdks will work on a 64bit cpu, won't they?)
Or should i try a different version - 82?
Is there a version that is most reliable for most modules?
Same results in here, I guess we have to change the SELinux mode somehow for it to work according to what I've read somewhere else...
llucax said:
Same results in here, I guess we have to change the SELinux mode somehow for it to work according to what I've read somewhere else...
Click to expand...
Click to collapse
As skeleton1911 wrote "and before you flash it use selinuxmodechanger". That fixed most of my problems, I also use xposed V84, haven't tried V85 though
there is a solution for xposed by skeleton1911
---------- Post added at 02:25 PM ---------- Previous post was at 02:22 PM ----------
skeleton1911 said:
Guys
there is a solution for xposed:
1. with mixplorer go to system/etc/init.d/ 07permissive and open it with editor (just tap on it)
2. remove the sleep 60 line. save and reboot to recovery
3. flash xposed framework , reboot and install xposed app and your modules. enable them in xposed app and reboot (normal xposed procedure)
4. open your apps like gravitybox etc.. ( they will connect to the xposed framework now)
5. open 07permissive again in system/etc/init.d and add sleep 60 into it again
6. save and reboot
Done!
in short words:
the cause is permissive and enforcing. Xposed only run in permissive mode on boot , but permissive mode forces some apps to close , but it is needed for viper v4a so i did this init.d script, system boots in enforcing and after 60 sec it will switch to permissive.
this is a dirty but working method. there is no other way at the moment because elephone didnt released the kernel source to modify it..
1. remove sleep 60 in 07permissive , save and reboot
2.perform the xposed stuff and after reboot open all xposed apps so they can connect to the xposed framework
3. add sleep 60 back into 07permissive and reboot
All works now!
cheers!
p.s: I will make a flashable zip for that soon ​
Click to expand...
Click to collapse
Do it anybody probe it? Maybe Do it working?
That's for his custom rom. For the stock rom you need selinuxmodechanger, set it to permissive and soft reboot via xposed. It will work fine then!
Aha, thanks, I didn't know what is the difference
Jtig said:
That's for his custom rom. For the stock rom you need selinuxmodechanger, set it to permissive and soft reboot via xposed. It will work fine then!
Click to expand...
Click to collapse
Mmm, OK, maybe is the soft reboot what I missed, because I used selinuxmodechanger and it didn't work with a full reboot. I am using stock but with RodriguezMod, but I think I will try the Eragon ROM. I'll report back. Thanks!
I'm finally trying the Eragon ROM, and following the steps from skeleton1911 finally seem to be working! At least Amplify for the first time is not complaining about not having Xposed. So I wiped, flashed the ROM, updated the SuperSU binary, rebooted, remove the sleep from the init.d script, went to the Xposed installer Material beta, updated from v82 to v85 using the installer, and after that flash, Amplify started to recognize Xposed!
Jtig said:
That's for his custom rom. For the stock rom you need selinuxmodechanger, set it to permissive and soft reboot via xposed. It will work fine then!
Click to expand...
Click to collapse
That fixed it, thanks.

Official N Xposed is here

https://www.xda-developers.com/official-xposed-framework-android-nougat/
https://forum.xda-developers.com/showthread.php?t=3034811
https://forum.xda-developers.com/xposed/discussion-xposed-nougat-t3685687
Let's share what does/doesn't work
Since I made the post, it's only fair I go first.
On A2017G, stock and updated via OTA to 7.1, the flash was successful. The first boot took ~10 minutes. I will now start testing modules and update this post with what does/doesn't work.
Modules I tried so far:
LP: Works
Amplify Battery Extender: Works
Greenify: Does NOT work - The module is active, however, the app does not seem to be aware that it is.
-I'm looking for the old Youtube Background Playback module. It seems to have been pulled from the download list inside xposed manager. If anyone has a copy of it, it would be great to see if it's still working. The LP patch for background play stopped working for me on 3 different devices about 2 weeks ago.
Great!
Maybe a stupid question, but will installing xposed still break safetynet checks? That was the only benefit of running.g without xposed; aps like horizon / Ziggo Go worked, hate to have to do without it.
TIA,
Cheers,
/Cacti
Sent from my ZTE A2017G using XDA-Developers Legacy app
Amplify can't see wakelock or service...greenfy continue to tell me to activate the module. (I just set on the module and reboot many times)
UPDATE: other users with different device have the same problem, I think we need an update of these apps for working with the new version of exposed.
https://forum.xda-developers.com/xposed/discussion-xposed-nougat-t3685687
Running A2017UV1.1.0B32 (android 7.1.1) rooted by Magisk Version 14.0.
all was good but when installed xposed (SDK 25/API 25) something is wrong;
SafetyNet is faild at check and in Magisk , when pressing Menu->Superuser I get "Magisk Manager has stopped"
but root is working and Xposed modules are working.
mb0 said:
Running A2017UV1.1.0B32 (android 7.1.1) rooted by Magisk Version 14.0.
all was good but when installed xposed (SDK 25/API 25) something is wrong;
SafetyNet is faild at check and in Magisk , when pressing Menu->Superuser I get "Magisk Manager has stopped"
but root is working and Xposed modules are working.
Click to expand...
Click to collapse
I had the magisk FC too. Fixed it by switching to stable channel reinstalling both the zip and the launcher. Safety net is broken with magisk hide setting and the "universal safety net fix" module.
rzarectha said:
I had the magisk FC too. Fixed it by switching to stable channel reinstalling both the zip and the launcher. Safety net is broken with magisk hide setting and the "universal safety net fix" module.
Click to expand...
Click to collapse
Thanks. Not what I wanted to hear but still [emoji4]
Cheers,
/Cacti
Sent from my ZTE A2017G using XDA-Developers Legacy app
@rzarectha thank you, but it didn't help. even tried install beta version;
tried to complete uninstall and install again the zip and apk - it worked and no more FC.
Im also on B32 with Magisk, but currently running the official Xposed for Magisk. Should I use the Xposed uninstaller or just remove and uninstall the Magisk Xposed module before starting with the official Xposed process?
Regarding YouTube background play:
I found the .apk on their github page, it's in the first thread that mentions it being removed from the repo. I tested it and it works!
For whatever reason, I cannot get past a bootloop after installing via TWRP. Interestingly, I can install the unofficial module from back in August. I can uninstall that just fine, but reinstalling the proper one does nothing but bootloop. Anyone else having this problerm?
Could anyone try running Fate Grand Order?
After update to V88 the boot time is longer for 45-50 second on my A2017G with Stock 7.1.1B06. With inofficial V87 boots better
This is what I have setup so far. Crappalinks, YouTube Adaway, XInsta, all work. Greenify doesn't and neither did Amplify, not properly anyway. Also it does break Safety net. We'll have to wait for the Magisk Module
rzarectha said:
Since I made the post, it's only fair I go first.
On A2017G, stock and updated via OTA to 7.1, the flash was successful. The first boot took ~10 minutes. I will now start testing modules and update this post with what does/doesn't work.
Modules I tried so far:
LP: Works
Amplify Battery Extender: Works
Greenify: Does NOT work - The module is active, however, the app does not seem to be aware that it is.
-I'm looking for the old Youtube Background Playback module. It seems to have been pulled from the download list inside xposed manager. If anyone has a copy of it, it would be great to see if it's still working. The LP patch for background play stopped working for me on 3 different devices about 2 weeks ago.
Click to expand...
Click to collapse
why use Xposed for youtube adaway and background player when they make a separate app for that over here https://forum.xda-developers.com/android/apps-games/app-iytbp-injected-youtube-background-t3560900 I have been using this for a while now and it is great
reV17 said:
This is what I have setup so far. Crappalinks, YouTube Adaway, XInsta, all work. Greenify doesn't and neither did Amplify, not properly anyway. Also it does break Safety net. We'll have to wait for the Magisk Module
Click to expand...
Click to collapse
There is a magisk module on the repo but to my knowledge it still breaks safetynet
For those with issues with magisk and xposed, you can't use them both together, if you want to then you have to use the specific xposed magisk module here https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268 also flashing xposed regardless magisk or not its going to break safetynet no matter what. Will explain in that magisk xposed thread.
If someone got problems like me, heres my way i installed it successfully and get everything to work (Magisk!):
- disable xposed modules
- restart to recovery
- install Xposed v88.2 by topjohnwho (from xposed thread) via recovery
- reboot to system (first boot took ~9min)
- install Xposed Installer 3.1.2 for Magisk
- activate modules in xposed installer
- reboot phone and its done.
If you dont deactivate the xposed modules before flashing xposed, you maybe have to reinstall them and maybe set up everything new, if you cant save the settings for the modules. This was happening in my first try. In my second try i disabled them before and activated after flashing and dont have do setup every xposed module again.
A2017G with B06 and Magisk v14.2.
Can you use gravity box module on the stock rom? Is miflavor "close enough" to aosp to be compatible with mods made for that?
rzarectha said:
Can you use gravity box module on the stock rom? Is miflavor "close enough" to aosp to be compatible with mods made for that?
Click to expand...
Click to collapse
Yes. Not all is working, but center clock, battery mod in statusbar, RAM usage in recents, down-/uploadspeed in statusbar and some other things ... enough for me.

Categories

Resources