I hereby ask if someone in the forum I can sell or get to buy this card usb e2009-JBL-E03-sub-PCB-v2.0, for my hdc sunny II that was burned ... it already searched and still nothing is found and muitourgente my phone repair ...
now agadeço all possible help ...
bodyjoao said:
I hereby ask if someone in the forum I can sell or get to buy this card usb e2009-JBL-E03-sub-PCB-v2.0, for my hdc sunny II that was burned ... it already searched and still nothing is found and muitourgente my phone repair ...
now agadeço all possible help ...
Click to expand...
Click to collapse
Very late but
http://www.aliexpress.com/item/Ultr...-Sanei-N65-Ampe-A65-Zync-Z605/1864978001.html
Related
Hi,
So I am getting the Samsung Galaxy S II from Bell tomorrow. I would like to know what i should check for right out of the box.
Example would be , I heard about some yellow or blue tint on the screen, if someone can tell specifically how to check if I have that problem and where it is.
Any other things i need to check before putting my sim card in the phone. Basically like a check list to make sure its not one of those bad apples. Thank you soo much.
I would like to know asap since I am going to buy it tomorrow.
PS: It might be a direct question but i found this to be the best place to place this thread.
PSS: I found this video when googling but i dont speak the language in the video if someone can explain what is happening I would appreciate it.
after eight posts i can post links I cant right now i will update the original post when I have 8 posts, till than the name of the youtube video is "Samsung Galaxy s2 i9100 Test before buying with service menu and USB OTG test" so u can search it on youtube.)
http://www.youtube.com/watch?v=ddeynnz0XR8
ur USB host And Hub query should be solved by the Video I uploaded here ..
So am looking at getting a USB Jig for my Galaxy S2, i've seen some on ebay, but i also found a site called usbjig.com anyone got any experience with that site? Reason for asking is because i don't want to end up ordering the wrong thing, so hopefully someone here can point me in the right direction.
Thanks in advance =)
Nitrius said:
So am looking at getting a USB Jig for my Galaxy S2, i've seen some on ebay, but i also found a site called usbjig.com anyone got any experience with that site? Reason for asking is because i don't want to end up ordering the wrong thing, so hopefully someone here can point me in the right direction.
Thanks in advance =)
Click to expand...
Click to collapse
I got one off ebay for less than £2, delivered. If you have any doubts then the best thing is to just msg the seller. At least that way if it's not suitable then you can claim the money back.
johncmolyneux said:
I got one off ebay for less than £2, delivered. If you have any doubts then the best thing is to just msg the seller. At least that way if it's not suitable then you can claim the money back.
Click to expand...
Click to collapse
Could you supply a link please?
O and O said:
Could you supply a link please?
Click to expand...
Click to collapse
just type "samsung galaxy s2 jig ebay" into google and viola the top results are what you need.
Hi can you tell me if the jig is the same as the one used in the I9000, if so i have one that i made up for that one. thanks and regards...
I use the same jig I used with the vibrant... as a matter of fact, IV used it with every Samsung phone IV had. Its the same.
Sent from the best phone on the planet (SGS2) running the best ROM on the planet (Cognition S2)!
As the latest release from Samsung have some measurements put in place in the bootloader to stop the usb jig from working, can ofc update without the new bootloader or just downgrade, but am wondering, will we see new types of usb jigs now? Maybe i should wait a bit before getting one? Heard some talk about usb jig cables here: http://forum.xda-developers.com/showpost.php?p=17777492&postcount=226 is that the way to go? Or?
Also does anyone got any experience with usbjig.com?
So I got my jig today. What's the deal with the new ROMs are the jigs not compatible? Someone please explain ...
Also any news on the hidden counter?
Sent from my GT-I9100 using XDA App
no news on hidden counter
the new roms have a new bootloader that prevents the jig from working and so far there seems to be no way to make it work with the new bootloader.
solution: go to intratech's official Rom thread in the development section and search for the old bootloader, flash it with odin like a kernel (pda section), then reset your phone with the jig.
i mistakenly put the wrong phone models rom on my samsung galaxy skyrocket s 2 sgh-i727 now its "hard bricked" nothing turns on no buttons respond.. its not turning on at all.... ive found a video on Jtag'ing the motherboard to flash the origional rom again.. with a riff jtag box.. does anyone know a person that might be able to do it for me for like $50 or more... ? in LA or NEAR WOODLAND HILLS??
help please also im sorry if i posted on thte wrong post section... in new to xda
email me please: [email protected]
thank you
Dear forum friends, can I install a Samsung S2 I9100 logic board into a Samsung I777? Would that be compatible? I'm being offered an I9100 board for cheap but my display is I7777. My logic board works perfectly but the display died, so I wanted to know if the I9100 would work for me. Thanks!
calipjazz said:
Friends foreros a question I can place a logic card samsung samsung S2 I9100 I777 my bone would support my screen I777 are selling me an economic logic model badge but my screen is i9100 and i777 which works perfect it hurt me was the logic card and queia know if I can get this card which I will be selling model s2 i9100
Click to expand...
Click to collapse
Please try to reword your question because it is not understandable as you have written it. And then maybe someone will be able to offer the proper help. Thanks.
Sent from my Nexus 5 using Tapatalk
4-2ndtwin said:
Please try to reword your question because it is not understandable as you have written it. And then maybe someone will be able to offer the proper help. Thanks.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Dear forum friends, can I install a Samsung S2 I9100 logic board into a Samsung I777? Would that be compatible? I'm being offered an I9100 board for cheap but my display is I7777. My logic board works perfectly but the display died, so I wanted to know if the I9100 would work for me. Thanks!
forgive me I do not speak English
calipjazz said:
Dear forum friends, can I install a Samsung S2 I9100 logic board into a Samsung I777? Would that be compatible? I'm being offered an I9100 board for cheap but my display is I7777. My logic board works perfectly but the display died, so I wanted to know if the I9100 would work for me. Thanks!
forgive me I do not speak English
Click to expand...
Click to collapse
I would think it's "possible", but I've never done it or heard of anyone who has. Because the devices are virtually identical there's the chance it might work, but just installing an i9100 battery door on the i777 took a bit of work/small machining.
So basically if all of the holes line up theoretically it "should" work. Good luck, my friend, let us know how it goes.
SteveMurphy said:
I would think it's "possible", but I've never done it or heard of anyone who has. Because the devices are virtually identical there's the chance it might work, but just installing an i9100 battery door on the i777 took a bit of work/small machining.
So basically if all of the holes line up theoretically it "should" work. Good luck, my friend, let us know how it goes.
Click to expand...
Click to collapse
sure count on that gentleman
hi how to bypass the screen lock in the samasung galaxy tablet so s2 not to lose data but also to not remove the blockade, I need to break into the tablet to pull information from him to the owner did not realize that someone was poking around.
Please help me, it is important for me
RMNQ said:
hi how to bypass the screen lock in the samasung galaxy tablet so s2 not to lose data but also to not remove the blockade, I need to break into the tablet to pull information from him to the owner did not realize that someone was poking around.
Please help me, it is important for me
Click to expand...
Click to collapse
These types of questions are usually asked by people with stolen tablets so no one will be able to answer on this development website. Sorry.
Have your friend take it to a repair shop and prove ownership. They can help him.
Thread closed