[Q] Some gapps force close when ativate ART on NEAT ROM - Galaxy S II Q&A, Help & Troubleshooting

hello im using this rom and when im activate ART(from dev opt/select runtime) i got some gapps crashed
i flashing gapps 4.4.0 in the beginning (when im flashing this rom too), and now i try to flashing gapps 4.4.4 but im always got an error when flashing
maybe someone can help me

kai1313 said:
hello im using this rom and when im activate ART(from dev opt/select runtime) i got some gapps crashed
i flashing gapps 4.4.0 in the beginning (when im flashing this rom too), and now i try to flashing gapps 4.4.4 but im always got an error when flashing
maybe someone can help me
Click to expand...
Click to collapse
What gapps are you flashing? Try nano or micro gapps and try again. You can also try to wipe the cache for google play services.

Related

[Q] Help I have no GAPPS for ics Passion v13

I used the instructions on the development page.. Root, wipe everything then flash cm7, then cm7 gapps, then wipe everything and flash ics passion 13.. But I have no gapps installed when I booted. Is there a gapps link I can flash or do I need to go back to stock and redo it all from scratch? Thx in advance guys!
Just flash the gapps that you have.
s15274n said:
Just flash the gapps that you have.
Click to expand...
Click to collapse
I've tried that, then for some reason I get a boot loop.. Can I flash cm9 gapps? And if so do you have a link?

GAAPS installation Problem

Hello guys, I am a newbie to this forum(been following it for a long time and finaaly decided to join)
Anyways,
I am using a rooted moto e with twrp 2.7.2.0.
My problem is that when I flash this stock rom flashable zip(optimised version)
http://forum.xda-developers.com/moto-e/development/flashable-zip-stock-deodexed-rom-moto-e-t2823368
it flashes fine.But after clean flashing this rom, when I try to flash PA Gapps it throws an error which says
"INSTALLATION FAILURE: PA GApps can only be installed on top of an existing
PA GApps installation. Since you are currently using another GApps package, you
will need to wipe (format) your system partition before installing PA GApps"
This is happening for this file pa_gapps-modular-mini-4.4.4-20141121-signed.
It worked fine with previous versions of PA Gapps.I have attached the log file below.
Please help.
Why are you flashing gapps on a ROM that already has the playstore?
Sent from my XT1023
it will not work...as stock rom already have a gapp package
alex_is_the_1 said:
Why are you flashing gapps on a ROM that already has the playstore?
Sent from my XT1023
Click to expand...
Click to collapse
Just to update all Google applications to the latest version.
dchatterjee172 said:
it will not work...as stock rom already have a gapp package
Click to expand...
Click to collapse
Let me see flashing older gaaps versions. Yup i tried with an older version which is not gaaps 2.0
pa_gapps-modular-mini-4.4.4-20141110 and this worked. Maybe its a problem with latest gaaps package.

Moto E almost dead

Hi Guys!
Today I need your help. My moto e runs perfectly on kitkat roms only. When I flash lp or mm roms, it's system ui starts force closing. This is how the problem started:
I was on cm13 nightly and I decided to update my twrp from play store. So, I downloaded the twrp manager app from play store and updated my recovery to 3.0.0. And the phone worked perfectly until the next day, when it started giving Fc's all of a sudden. I rebooted to recovery and made a full wipe including internal storage. Then I flashed cm11 and flashed gapps. The ROM booted up perfectly and had no fc's at all. So I decided to flash mm again. I flashed AOKP marshmallow but it again started giving me FC's. So, I reverted back to cm11and found no fc's again.
Here's the list of ROMs I tried and was unsuccessful each time:
AOKP(MM)
AOSP(MM and LP)
Cm13
Cm12.1
Blisspop(MM and LP)
Tesla ROM(LP)
Crdroid(MM)
ZephyrOS(MM)
AICP(MM)
Here's the list of ROMs I flashed and the device didn't give any fc's:
Cm11 nightly
Stock ROM Optimized
Stock ROM Full
CrDroid(kitkat)
Please guys I am in need of Deliberate help. Please do not post condolence comments like,"Strange issue mate, Sorry I don't know, Best of Luck". Please post only if you know the method or you have any links to the method.
In need of your help,
Regards,
PoseidonKing
I had the same issue with other MM roms. I got no fc error on CM13 and Resurrection Remix MM rom. Only these two mm Roms worked for me.
It's surely a device hardware issue. If only kitkat based roms work in your condor, then maybe it doesn't properly support art framework. So your last resort maybe going to service center
Sent from my Moto E
Try flashing factory image
Sent from my Moto E using Tapatalk
i think the problem is in the recovery. download cwm recovery img and flash it with fastboot and after that wipe everything including internal storage (do not reboot recovery at that tyme or before installing rom ) do not wipe ur sd card and then install rom without gapps and boot up after sucessful boot then again boot to recovery and install gapps... if problems remains same then try downloading other gapps package for 6.0 (preferred open gapps).
no need all of this, just record the logcat and post here, surely you'll get proper fix!
I think Twrp 3.0 is causing this revert to old 2.8 version.It is nothing to do with hardware if it is a hardware related problem then you can't even switch on phone.
Agreed! Custom recoveries known to, often cause these sort of problems.. Give the twrp 3.0.2 by magdoez or 2.8.7 a try.. These are the ones that work perfectly for me.
Try updating recovery from your current recovery itself & reboot.. Then try the aforementioned mm roms..
piku 123 said:
I think Twrp 3.0 is causing this revert to old 2.8 version.It is nothing to do with hardware if it is a hardware related problem then you can't even switch on phone.
Click to expand...
Click to collapse
Thanks bro, but the method ain't working. I am currently on TWRP 2.7.1.0 and I still face the same problem...
Adarsh1998 said:
no need all of this, just record the logcat and post here, surely you'll get proper fix!
Click to expand...
Click to collapse
Okay, thanks! But how the hell do I record a logcat??
PoseidonKing said:
Okay, thanks! But how the hell do I record a logcat??
Click to expand...
Click to collapse
Refer this thread: http://forum.xda-developers.com/showthread.php?t=1726238&page=28
Sent from my Moto E using Tapatalk
Hi guys,
Thank You everyone for your generous and quick help. My Moto E is fixed now. I flashed cyanpop mm and then tried the adopted sd option. Rebooted the device and now it is working perfectly. Though it wouldn't have been possible without my brother's help @Andy1911. Thank you once again to all of them who helped me.
Regards,
PoseidonKing.

cm13 flashing gapps at nightly upgrade

I was wondering if someone could clarify if dirty flashing a cm13 upgrade (nightly) you can also flash new gapps, or if based on the recommendation below that can only be done on first cm flash from stock.
Anyone ever done this or it just is not useful /should not /cannot be done?
"Note: In case you want to use any gapps, YOU MUST install the right gapps the first time that you flash a marshmallow ROM. Do not boot with an older gapps or without one and then try to install it later."
Thanks!
Yes you can flash new gapps after dirty flashing CM13. But I don't know why anyone would do that since CM13 has gapps persistence between dirty flash.
Pixel launcher as system app got me wondering about this!
Thanks!
xskull03 said:
Yes you can flash new gapps after dirty flashing CM13. But I don't know why anyone would do that since CM13 has gapps persistence between dirty flash.
Click to expand...
Click to collapse
AGREE !~:good:
do whatever , but remember,
DO NOT TURN ON THAT "UPDATE CYANOGEN RECOVERY" OPTION, which erases twrp ,
and too many ppl complain about stuck in cm recovery after ota,, remember that..
Thanks for that!
Don't even know where that is.
Will look for it!
jvc73 said:
Thanks for that!
Don't even know where that is.
Will look for it!
Click to expand...
Click to collapse
It's in Developer Options.
Sent from my Galaxy Tab 3 using XDA Labs

Android 7.1.2 don't work

Hi i have a problem, when i install custom rom for example. rr 5.8.3 on 7.1.2 when i boot phone and i have screen welcome and i start configuration and this configuration crashed, i install with wipe, and i install new nitrogenos and i have the same situation. When i install rom on 7.1.1 all its ok, what can i do to fix it? Please help me its screen from phone http://imgur.com/a/uUPls
You might be using an outdated GApps package, as it is known to cause this issue. Try with the latest opengapps.
jayaram95 said:
You might be using an outdated GApps package, as it is known to cause this issue. Try with the latest opengapps.
Click to expand...
Click to collapse
Yea i install old version gapps and i dont have any problems on 7.1.1, hmm then i must install new gapps if i check i will write
;P
You can flash newer gapps from here.
OR
You can follow this guide on older gapps.
Very thanks, i have one question, i must install firmware to install rom for example rr or nitrogen? i never install and everything is right
Okay i install beansgapps and its works Thanks for help
badamczuk1 said:
Very thanks, i have one question, i must install firmware to install rom for example rr or nitrogen? i never install and everything is right
Click to expand...
Click to collapse
no need to flash it if there's nothing wrong
if there's something wrong, try to flash latest MIUI Beta firmware, you can find it in ROM section, and no need to flash it everytime you flash a new ROM, just flash it once and you're good to go

Categories

Resources