Hi Folks,
I would like to boot up my zu c6833 when it is connected to AC power.
After some research, I noticed the Nexus 7 can achieve this through adding strings in bootloader binary:
Code:
fastboot oem off-mode-charge 0
And Samsung devices can achieve this through modifying the file "system/bin/playlpm" with boot command added in.
A similar solution works with Moto E through deleting the file "system/bin/charge_only_mode".
So, if anyone knows how to modify the ZU to get it automatic boot up when the charger is pluged? Thanks!
have a read of http://forum.xda-developers.com/xperia-z-ultra/help/dash-install-zu-truck-externalize-power-t2896692
Thanks @blueether. I read the thread before but could not understand how exactly the ZU can be made to boot on charging from that thread.
Does the Pimped Kernel caused the ZU to be able to boot from AC power. Can I assume if I flash the kernel, I will be able to boot the phone on AC power? Thanks for your help.
claud0902 said:
Thanks @blueether. I read the thread before but could not understand how exactly the ZU can be made to boot on charging from that thread.
Does the Pimped Kernel caused the ZU to be able to boot from AC power. Can I assume if I flash the kernel, I will be able to boot the phone on AC power? Thanks for your help.
Click to expand...
Click to collapse
my CM 11 kernel will boot when AC is connected, as will my build of the Sony AOSP 5.0.x kernel, just tested the Z1 multiboot boot.img on a c6802 and that boots on charge as well
blueether said:
my CM 11 kernel will boot when AC is connected, as will my build of the Sony AOSP 5.0.x kernel, just tested the Z1 multiboot boot.img on a c6802 and that boots on charge as well
Click to expand...
Click to collapse
Thank you very much for helping this!
blueether said:
my CM 11 kernel will boot when AC is connected, as will my build of the Sony AOSP 5.0.x kernel, just tested the Z1 multiboot boot.img on a c6802 and that boots on charge as well
Click to expand...
Click to collapse
Is that possible to give more details on the purpose of flashing Z1 multiboot boot.img on a c6802? Sorry for the noob question but I did not know the Z1 multiboot would work on a ZU and if so, the ZU would do multiboot as well? Are there any links I could follow and do more research?
Thanks in advance.
claud0902 said:
Is that possible to give more details on the purpose of flashing Z1 multiboot boot.img on a c6802? Sorry for the noob question but I did not know the Z1 multiboot would work on a ZU and if so, the ZU would do multiboot as well? Are there any links I could follow and do more research?
Thanks in advance.
Click to expand...
Click to collapse
If I get time I was going to try and port it across to the togari. At the moment it only works for main ROM on the ZU
Related
USB Charging : Okay
USB ADB : Okay
USB MTP : Okay
Video : Okay
Audio : Okay
Sensors : Okay
Screen rotation : Okay
WLAN : Okay
WLAN Hotspot : Okay
GPS : Okay
GSM : Okay
GSM Data : Okay
GSM Voice : Okay
GSM SMS : Okay
Bluetooth : Okay (BUG: Settings menu, the Bluetooth connection button does not work, but if you enter the Bluetooth menu, and there you turn it works.)
NFC : Okay (After the first boot, turn off the NFC and reboot your phone will then operate normally NFC)
Camera : Okay
FM Radio : Okay (SpiritFM Settings->Audio->Method->Digital Qcom OneXL/S/Sony/MoG)
Keyboard : Okay
MHL : Okay
OTG : Okay
Changelog pac-4.3_LBL-20140319-UNOFFICIAL-huashan
-Wifi mac load fix
-cpu thermal fix v2
Changelog pac-4.3_LBL-20140316-UNOFFICIAL-huashan
Install:
1: CWM-> Wipe data factory reset
2: CWM-> installing the ROM and then the GAPPS is also
3: CWM-> Power off
4: Flashtool: installed on this C5303_12.1.A.0.266_C1-FW.ftf
The ROM is also included CWM whatever the volume down button to enter.
Download:
pac-4.3_LBL-20140319-UNOFFICIAL-huashan
4.3 GAPPS
C5303_12.1.A.0.266_C1-FW.ftf
Source:
hijack-ramdisk-huashan
android_device_sony_huashan
android_device_sony_qcom-common
android_vendor_sony
Screenshots:
Credits:
-dh.harald
-KeiranFTW
-cray_Doze
-davidmarco
-dssmex
-DooMLoRD
-PAC-man Team
-PA Team
-AOKP Team
-Cyanogenmod Team
How?
Since it is possible to boot non Sony ROMS with LB ROMS are popping out of the ground like trees.
@ OP: Is it possible to do the same with KitKat (CM11)?
Nice work!
Wow amazing work, it is as if ROMs are raining down from the sky now on LB now.
Sent from my Xperia SP using xda app-developers app
mrjraider said:
Since it is possible to boot non Sony ROMS with LB ROMS are popping out of the ground like trees.
@ OP: Is it possible to do the same with KitKat (CM11)?
Nice work!
Click to expand...
Click to collapse
All these roms existed back on 4.1.2...They were based on a 4.3 kernel..Now that we have a 4.3 kernel we don't need to change kernel so anyone can rebuild the roms based on the stock kernel.Unlocking the bootloader enables you to change kernels but now we have a 4.3 rom and if we rebuild it based on a 4.3 stock kernel there is no need of having unlocked bootloader.... KitKat roms require a change of kernel(4.4 kernel) which you can't change unless you have unlocked bootloader
Woooot.
And another one! ^^
TBH, the only one that's missing me is slim.... ^^
Sent with XSP running CM10.2 LB
Thanks very much, can you make a function to lock apps? xD if not please
try to made a kernel to 4.4.2 for locked bootloader if possible?
You are awesome!
---------- Post added at 09:22 PM ---------- Previous post was at 09:04 PM ----------
I LOVE U
Well, KitKat is totally possible on locked BL. We don't need to change kernels for it, we "just" need to compile a module for every change in the kk kernel, and then insmod the modules before hijacking ramdisk. So, it's possible, but really time-consuming.
The best solution is to get kexec working on locked BL's.
There's a thread on xda about it, where delewer, dh.harald and others tried to make it work. Maybe you, @bagyusz, should try? You showed us that you have great skills.
And, just to clarify, with kexec we will be prepared for Android 4.5, 4.6... and we won't need to make separate ROMs for locked and unlocked BLs. Also, MultiROM solutions would be possible.
Complete freedom and equality!
Sorry for my English!
BUG FOUND : CPU THERMAL HIGH
The cell is burning on my hand can you fix this?
Can you do a kitkat rom for locked bootloader ?
Ram Management
Is zip only 200MB to download? Is it normal?
Wysłane z mojego C5303 przy użyciu Tapatalka
Remlas said:
Is zip only 200MB to download? Is it normal?
Wysłane z mojego C5303 przy użyciu Tapatalka
Click to expand...
Click to collapse
Yup, it's perfectly normal
MrSteve555 said:
Well, KitKat is totally possible on locked BL. We don't need to change kernels for it, we "just" need to compile a module for every change in the kk kernel, and then insmod the modules before hijacking ramdisk. So, it's possible, but really time-consuming.
The best solution is to get kexec working on locked BL's.
There's a thread on xda about it, where delewer, dh.harald and others tried to make it work. Maybe you, @bagyusz, should try? You showed us that you have great skills.
And, just to clarify, with kexec we will be prepared for Android 4.5, 4.6... and we won't need to make separate ROMs for locked and unlocked BLs. Also, MultiROM solutions would be possible.
Complete freedom and equality!
Sorry for my English!
Click to expand...
Click to collapse
I already have a boot able cm11, but there is no picture to display. Should we display a highly modified CAF source. CM10.2 It works because the default lib files were used.
im unlocked.. im on cm11.. but cn i boot this? this one look interesting..
danielhariri said:
im unlocked.. im on cm11.. but cn i boot this? this one look interesting..
Click to expand...
Click to collapse
Just use normal PacRom Link if you have an unlocked bootloader.
0l1v3rof said:
Just use normal PacRom Link if you have an unlocked bootloader.
Click to expand...
Click to collapse
theres no download link n i had tried it before.. bootlooped.. btw this rom amazing.. no issue at all... testing batery life now..
---------- Post added at 01:02 AM ---------- Previous post was at 12:50 AM ----------
on first test i was able to get this score 21248 1.6ghz interactive... compare to other custom rom.. this rom the best so far..
Hello,
Same question, as i'm a noob on xperia sp (ok on galaxy s2).
I have unlocked the sp of my son, could he use this rom ?
For the installation, just like in the OP ?
Thanks in advance.
jm78
bagyusz said:
I already have a boot able cm11, but there is no picture to display. Should we display a highly modified CAF source. CM10.2 It works because the default lib files were used.
Click to expand...
Click to collapse
Please, release the cm11 for unlocked bootloader we dont need a iamge for boot
I prefer cyanogenmod because pacman and others roms are bugging CPU thermal , and battery is terrible
i using your cyanogenmod 10.2 and battery is awesome
Please!!
jm78 said:
Hello,
Same question, as i'm a noob on xperia sp (ok on galaxy s2).
I have unlocked the sp of my son, could he use this rom ?
For the installation, just like in the OP ?
Thanks in advance.
jm78
Click to expand...
Click to collapse
you can install normally, here's a guide: CLICK HERE
I have a Problem with the CM Recovery in CM12 5.0.2
In CM Recovery I can only flash CM12 Roms but no kernel or mods and you can not wipe dalvik vor fix permissions in CM Recovery.
I need a TWRP recovery for CM12 and it must compatible with Xperia Z Ultra because I love TWRP and I have find so much mods and I have a selfmade Kernel and I cannot flash them.
Sorry for my Bad english
Senat from my Xperia Z Ultra CM12 5.0.2
the-cortana-project said:
I have a Problem with the CM Recovery in CM12 5.0.2
In CM Recovery I can only flash CM12 Roms but no kernel or mods and you can not wipe dalvik vor fix permissions in CM Recovery.
I need a TWRP recovery for CM12 and it must compatible with Xperia Z Ultra because I love TWRP and I have find so much mods and I have a selfmade Kernel and I cannot flash them.
Sorry for my Bad english
Senat from my Xperia Z Ultra CM12 5.0.2
Click to expand...
Click to collapse
Have you tried using multirom? the modified TWRP should serve it's basic purpose
I made a post about recoveries for the Z Ultra check out this link
http://forum.xda-developers.com/xperia-z-ultra/help/tip-people-issues-lost-recoveries-t3016699
Choose TWRP and flash than reboot and flash whatever you need and profit!!!!
Don't forget to hit the thanks button
Murrda said:
I made a post about recoveries for the Z Ultra check out this link
http://forum.xda-developers.com/xperia-z-ultra/help/tip-people-issues-lost-recoveries-t3016699
Choose TWRP and flash than reboot and flash whatever you need and profit!!!!
Don't forget to hit the thanks button
Click to expand...
Click to collapse
Thanks, but i cannot Start Rashr, when i starting, my system crashes
Same with The Selinux Mode Changer, but that is a another Problem
Sorry for my Bad english
Sent from my Xperia Z Ultra CM12 5.0.2
This is my version of TWRP built for the 2015 Moto X Play. It should work fine, but using it is a try at your own risk procedure. Your bootloader must be unlocked to use this recovery. Fastboot mode is used to flash or boot this recovery. To enter fastboot mode, turn off your device, hold PWR and VolDn for 3 seconds, then let go.
Differences between upstream TWRP and my fork:
My original green theme
No SuperSU
No TWRP app
No HTC Dumlock cruft
Updated pigz compressor (slightly faster and more tolerant of corruption)
To temporarily boot this recovery:
Code:
fastboot boot twrp.img
To permanently flash it:
Code:
fastboot flash recovery twrp.img
The download is up on the downloads tab.
XDA:DevDB Information
TWRP, Tool/Utility for the Moto X Play
Contributors
vache, squid2
Source Code: https://github.com/sultanqasim/android_device_motorola_lux
Version Information
Status: Stable
Current Stable Version: 3.2.3-r1
Stable Release Date: 2018-08-16
Created 2015-09-05
Last Updated 2018-08-16
Reserved
2015-09-17 :
-Fix flashing custom zips
Gr8!!
Is this actually built for X Play? I know it sounds silly but there's no kernel source yet is there? Or do we not need that to build recovery?
Sent from my Vodafone Smart ultra 6 using Tapatalk
Yes it's build for X Play, based on G 2015 device tree. I'm using MSM8916 generic kernel from Motorola, modded by @squid2 (https://github.com/sultanqasim/android_kernel_motorola_msm8916)
Ahh that's great. Thanks for this my device should be delivered tomorrow so I'll be definitely using this.
We will still need kernel source for cm12 etc though surely?
Sent from my Vodafone Smart ultra 6 using Tapatalk
TWRP working fine here on XT1562
I'm making a stock TWRP Backup + some partition dump
Next move will be starting playing with CM12.1
ephumuris said:
Ahh that's great. Thanks for this my device should be delivered tomorrow so I'll be definitely using this.
We will still need kernel source for cm12 etc though surely?
Sent from my Vodafone Smart ultra 6 using Tapatalk
Click to expand...
Click to collapse
Yes i think we'll have to wait for kernel sources to get a working custom.
Already build one (SOKP) but cannot get it to boot (with stock kernel or msm8916 kernel)
Shreps said:
TWRP working fine here on XT1562
I'm making a stock TWRP Backup + some partition dump
Next move will be starting playing with CM12.1
Click to expand...
Click to collapse
can you please upload your dumps and backups if there are ready for it?
i have a broken XT1562 without a nandroid or other backups...
thanks
Thanks for this Vache! However, just to let you know this is still showing as Moto G 2015 when plugged into my PC whilst in recovery - not sure if that's normal or not?
skdubg said:
can you please upload your dumps and backups if there are ready for it?
i have a broken XT1562 without a nandroid or other backups...
thanks
Click to expand...
Click to collapse
Hi,
check this : http://moto.shreps.fr/?dir=Moto X Play (lux)/rom/stock_XT1562_EMEA-retfr/ZY2223RWB8
Shreps said:
Hi,
check this : http://moto.shreps.fr/?dir=Moto X Play (lux)/rom/stock_XT1562_EMEA-retfr/ZY2223RWB8
Click to expand...
Click to collapse
Hopefully they have a XT1563 full backup soon as well. Cheers.
Vibration and screen brightness are not working
Btw the stock firmware is out : http://www.filefactory.com/file/4ivu9kooeesf/?code=275
this one is for xt1563 CA
XMoDuLeSx said:
Vibration and screen brightness are not working
Btw the stock firmware is out : http://www.filefactory.com/file/4ivu9kooeesf/?code=275
this one is for xt1563 CA
Click to expand...
Click to collapse
@vache
Try adding these to the defconfig: https://github.com/sultanqasim/andr..._twrp2/arch/arm/configs/ext_config/lux.config
EDIT: I made a dedicated defconfig that you can try for this recovery: https://github.com/sultanqasim/andr...p2/arch/arm/configs/msm8916-minilux_defconfig
Wow thanks for your great work. Soon, we'll be able to get custom kernel to go with the stock firmware. We will probably get better performance with a properly tuned CPU governor. I'd also love to see CM12 being ported but the Moto firmware is already really good. In fact, I'm not sure if I could live without the added feature like Moto Voice and Moto Assist.
squid2 said:
@vache
Try adding these to the defconfig: https://github.com/sultanqasim/andr..._twrp2/arch/arm/configs/ext_config/lux.config
EDIT: I made a dedicated defconfig that you can try for this recovery: https://github.com/sultanqasim/andr...p2/arch/arm/configs/msm8916-minilux_defconfig
Click to expand...
Click to collapse
@squid2 Did you used the lux_defconfig in ext_defconfig ?
Already tried with those addition, the phone boot but i have no RIL. (Stock ROM)
Ill post a new reco with this kernel.
EDIT : Published a new version, with the new kernel config, that fix brightness and vibration.
Shreps said:
Hi,
check this : http://moto.shreps.fr/?dir=Moto X Play (lux)/rom/stock_XT1562_EMEA-retfr/ZY2223RWB8
Click to expand...
Click to collapse
So flashing this restores functionality on a XT1562?
And another thing, if your TWRP version is working when I fastboot boot it, is it guaranteed that it'll work when I fastboot flash it? And another thing: Is there a possibility to backup stock recovery, just in case TWRP doesn't work properly? I tried booting your TWRP version and backing it up but that didn't work (duh.)
Best wishes
derelektrischemoench
derelektrischemoench said:
So flashing this restores functionality on a XT1562?
And another thing, if your TWRP version is working when I fastboot boot it, is it guaranteed that it'll work when I fastboot flash it? And another thing: Is there a possibility to backup stock recovery, just in case TWRP doesn't work properly? I tried booting your TWRP version and backing it up but that didn't work (duh.)
Best wishes
derelektrischemoench
Click to expand...
Click to collapse
Stock Recovery is also available on my backup.
And yes, if TWRP is working while booting it, should work also fine when flashing it.
Be sure to use the latest version by @vache
Ok thx.
And another thing, I made a backup of my recovery partition via ls -al /dev/block/platform/7824900.sdhci/by-name
followed by
dd if=/dev/block/mmcblk0p32 (the partition that had the name "recovery"assigned in the output of the first command)
and got a nice recovery.img written to my sdcard.
Now from my understanding, in case something goes wrong with TWRP i should be able to restore my stock recovery via fastboot flash recovery nameoftheimagethatidumped.img, is that correct?
Greetz DeM
squid2 said:
@vache
Try adding these to the defconfig: https://github.com/sultanqasim/andr..._twrp2/arch/arm/configs/ext_config/lux.config
EDIT: I made a dedicated defconfig that you can try for this recovery: https://github.com/sultanqasim/andr...p2/arch/arm/configs/msm8916-minilux_defconfig
Click to expand...
Click to collapse
Got it booting, my repack method was wrong. All seems to work fine now.
Now trying to build a custom ROM.
Orginal post:
https://www.google.pl/amp/s/forum.x...lopment/experimental-phh-treble-t3709659/amp/
Downolad Version V10:
With gapps and Su:
https://androidfilehost.com/?fid=746010030569954763
Without gapps and Su
https://androidfilehost.com/?fid=673956719939820512
Installation:
- First, you MUST be running a stock Android 8.0 ROM.
- Obviously, unlock your bootloader
- Download the correct system.img variant (see list of devices above, and dowload links below)
- Flash the system.img
- Do a Factory reset
- Reboot
What nor working?
- Broken camera because DRM KEY...
But all probably work pretty good!
For Xperia XZ1 and XZ1 COMPACT FLASH ONLY A version!!
Changeleog
v10: (2018-02/18)
- Android 8.1 !
- Includes versioned vndk, so devices running both 8.1 and 8.0 should work.
i heard google camera hdr+ working on android 8.1. is it working? What about battery efficiency?
Idk i not test this because my phone go to repair. I think camera not work on all apk. Because drm key broken but i don't know on 100%.
ok I will try it
eggimong said:
ok I will try it
Click to expand...
Click to collapse
Give screen plz. I will add on #1 post. And thank u!
i stuck on bootloop..
i flashed the file include su and gapps on 47.1.A.12.75. it stuck at sony boot logo then i flashed nosu and it stuck at boot animation
then i downgraded xz1 on 47.1.A.8.49 and flashed both but same result
i am not good at english :/
eggimong said:
i heard google camera hdr+ working on android 8.1. is it working? What about battery efficiency?
Click to expand...
Click to collapse
Maybe off topic but in Xperia XZ, Google camera hdr mod work fine without DRM keys in AOSP rom. I guess should work the same for XZ1
snake218 said:
Maybe off topic but in Xperia XZ, Google camera hdr mod work fine without DRM keys in AOSP rom. I guess should work the same for XZ1
Click to expand...
Click to collapse
you're right I installed aosp 8.1 (https://forum.xda-developers.com/xperia-xz1/how-to/aosp-8-1-t3750951)because project treble cause bootloop. it works hdr+!
eggimong said:
you're right i installed aosp 8.1 (https://forum.xda-developers.com/xperia-xz1/how-to/aosp-8-1-t3750951)because project treble cause bootloop. It works hdr+!
Click to expand...
Click to collapse
but their are limitation from sony like back cemra is set to 17 mp and iso set to 800 only they are in kernel i am working on it i am now learning kernel patching i have not done before lets hope for best
You can use TWRP brush into it？
V11 released
who can test that version?
I'll give it a shot
Download link?
N1ghtr08d said:
Download link?
Click to expand...
Click to collapse
Can be found in the original post from the treble forums.
Here is the post:
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
Good luck, let us know.
Redcalibur said:
Can be found in the original post from the treble forums.
Here is the post:
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
Good luck, let us know.
Click to expand...
Click to collapse
Complete waste of time. I tried several different ways to flash this ROM but it's just not compatible with the XZ1 8341. Now i have to flash back to stock and the restore my TWRP backup.
Incompatible ROMs should NOT be posted on these forums unless they have been tested at the very least by the OP.
N1ghtr08d said:
Complete waste of time. I tried several different ways to flash this ROM but it's just not compatible with the XZ1 8341. Now i have to flash back to stock and the restore my TWRP backup.
Incompatible ROMs should NOT be posted on these forums unless they have been tested at the very least by the OP.
Click to expand...
Click to collapse
Hey, I'm asking this just to be sure that we can consider the rom incompatible for our device.
You used the rom that said A-only, right? Since the thread states that the XZ1 only supports build A-only. If so, we could try mentioning the issues you experienced in the original thread.
Thank you for your time.
Edit: I've just seen your posts in the original thread. Sorry for the quote.
No it's ok, I don't mind helping, it's just frustrating. I flashed the A only nosu vanilla version, then booted into TWRP and performed a factory reset and when I rebooted into system the phone just hangs on the Sony boot screen for ages then reboots and does the same thing again and again.
I had the same experience with all A-only versions.
N1ghtr08d said:
No it's ok, I don't mind helping, it's just frustrating. I flashed the A only nosu vanilla version, then booted into TWRP and performed a factory reset and when I rebooted into system the phone just hangs on the Sony boot screen for ages then reboots and does the same thing again and again.
Click to expand...
Click to collapse
try this version, for me on xz1c it loads to the inscription of "xperia", and it hangs https://drive.google.com/open?id=118pwXm2UK95AaYTvIfDAiWDBk-rUBh6Q
Infinite restart animation………………cnm?
Xperia XZ1 G8341 Vanilla AOSP ROM
This is my first ROM and its fully Vanilla. I Just followed this Build guide without any modifications whatsoever.
The future goal is to build a stable Rom with mostly FOSS Software, stability and useful tools/settings.
Bugs/missing functions i discovered so far:
- Camera Not working always and -> Lens Distortion. Although RAW should be possible.
- Sony Bootlogo has some Artifacts
- No automatic APN setting
- No NFC 25.05 working
- No 90/120Hz mode (or does it?)
- No Display Colour Calibration
- Low Singlethread Geekbench Score (836) and (6060 Multicore) [Governors and schedulers not optimized]
Fingerprint Sensor is working and it takes some time to find Network (not sure if bug or normal).
I hope to find usable answers to those problems + ideas and hope, to receive enough feedback to improve as much as possible.
Just Flash all files (boot, recovery [or any working TWRP], system,vendor, userdata and the OEM Binaries [
SW_binaries_for_Xperia_Android_9.0_2.3.2_v9_yoshino.img] and you should be good to go.
XZ1 Single Sim(25.05.19)
XZ1 Dual Sim
SW_binaries_for_Xperia_Android_9.0_2.3.2_v9_yoshino.img
120Hz Mode
Obviously I am not responsible for bricked devices or anything that this could be related to.
XDA:DevDB Information
RumiRom, ROM for the Sony Xperia XZ1
Contributors
celeron1
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Based On: Stock AOSP Userdebug
Version Information
Status: Testing
Created 2019-05-25
Last Updated 2019-05-30
Don't use V8 binaries, V9 are out
https://developer.sony.com/file/dow...-for-aosp-pie-android-9-0-kernel-4-9-yoshino/
Worse perfomance is expected because of lack of qti perf framework
marios199546 said:
Don't use V8 binaries, V9 are out
https://developer.sony.com/file/dow...-for-aosp-pie-android-9-0-kernel-4-9-yoshino/
Worse perfomance is expected because of lack of qti perf framework
Click to expand...
Click to collapse
Neat!
Im gonna try these. Thanks a lot.
I would marry if you turn 60fps to 90-120-144 omg plz plz
ΒΕΓΑ said:
I would marry if you turn 60fps to 90-120-144 omg plz plz
Click to expand...
Click to collapse
There is little to nothing about this I could find for the xz1 except one oreo based rom. I have to compile the kernel for it and find out if 60+ hz is really working and how to succesfully implement a toggle option for it. Since im new at this it might take some time without help but its something I want to impliment.
The Xz1s Display obviously is really underperforming in non Sony roms without the "Bravia engine" (colour apperence) imo compared to other open roms. I tried the Bravia magisk module but could not see any difference (also did not checked what it should do at system level).
So if someone has more knowledge feel free to share
I compiled a Kernel from here and modified:
arch/arm64/boot/dts/qcom/dsi-panel-somc-poplar-base-sde.dtsi
arch/arm64/boot/dts/qcom/dsi-panel-somc-poplar-sde.dtsi
arch/arm64/boot/dts/qcom/dsi-panel-somc-poplar.dtsi
(changed 60hz to 90/120hz).
How can I check if the Panel really is working under those frequencies and if other steps are needed?
When compiling I got an Error with drivers/staging/wlan-qc/qcacld-3.0 -> so i removed them from drivers/staging/Kconfig (So apparently no Wifi).
These are the Kernels (boot):
90Hz
*Update 29.05. I Fixed Wifi for the 120Hz version. link in first post
Camera seems to work without problems (also Raw) so I guess there is something wrong with the precompiled Sony Kernel.
Also the Sony bootlogo is not present (no artifakts??)
And again. Flash at own risk.
What about the version for two SIM cards?
Model G8342.
Your rom works perfect on my phone, thanks dev.
Btw, doesn't it support Treble? I cannot boot any of the GSI roms on the forum...
Riskypedia said:
Your rom works perfect on my phone, thanks dev.
Btw, doesn't it support Treble? I cannot boot any of the GSI roms on the forum...
Click to expand...
Click to collapse
It should support Treble.
Maybe you also need to flash "Disable DM Verity" and "Magisk" after
Can be used on G8342 ? ?
Sent from my Sony Xperia XZ1 using XDA Labs
celeron1 said:
I compiled a Kernel from here and modified:
arch/arm64/boot/dts/qcom/dsi-panel-somc-poplar-base-sde.dtsi
arch/arm64/boot/dts/qcom/dsi-panel-somc-poplar-sde.dtsi
arch/arm64/boot/dts/qcom/dsi-panel-somc-poplar.dtsi
(changed 60hz to 90/120hz).
How can I check if the Panel really is working under those frequencies and if other steps are needed?
When compiling I got an Error with drivers/staging/wlan-qc/qcacld-3.0 -> so i removed them from drivers/staging/Kconfig (So apparently no Wifi).
These are the Kernels (boot):
90Hz
120Hz
Camera seems to work without problems (also Raw) so I guess there is something wrong with the precompiled Sony Kernel.
Also the Sony bootlogo is not present (no artifakts??)
And again. Flash at own risk.
Click to expand...
Click to collapse
Can i use this kernel with stock sony rom? (Existenz patched btw...)
ΒΕΓΑ said:
Can i use this kernel with stock sony rom? (Existenz patched btw...)
Click to expand...
Click to collapse
The Kernel is for AOSP (Linux kernel 4.9) so normally it shouldnt work with the Stock Firmware but i dont know if it works with the patched Existenz rom.
therma.cpp said:
What about the version for two SIM cards?
Model G8342.
Click to expand...
Click to collapse
Its for the single Sim.
Im not satisfied with the current State but I can build a dual sim version as well. (Building on hdd due to small SSD so it might take a while)
Screen is not responsive (SOV36). Any suggestions?
update: not the rom. tried to flash different rom and same result.
sinkoo1979 said:
Screen is not responsive (SOV36). Any suggestions?
update: not the rom. tried to flash different rom and same result.
Click to expand...
Click to collapse
Does it respond different while charging?
Is the screen properly clean?
Try flashing the last stock rom > same result?
If not try flashing any gsi > result?
Then full cfw flash + sw binary.
And do factory resets before flashing.
Hoping for the best. Not sure how and if the SOV36 model differs from the rest
celeron1 said:
Does it respond different while charging?
Is the screen properly clean?
Try flashing the last stock rom > same result?
If not try flashing any gsi > result?
Then full cfw flash + sw binary.
And do factory resets before flashing.
Hoping for the best. Not sure how and if the SOV36 model differs from the rest
Click to expand...
Click to collapse
no
yes
no
did not work
works with stock
sinkoo1979 said:
no
yes
no
did not work
works with stock
Click to expand...
Click to collapse
Dis you try one of these GSIs and did you flash the SW-Binaries after?
How "non responsive" is it? Laggy/Not at all/Ghost touches etc.?
Since this is off-Topic i will delete this message after you read it. You shuld open a new Thread where the Problem could be discussed.:good:
celeron1 said:
Dis you try one of these GSIs and did you flash the SW-Binaries after?
How "non responsive" is it? Laggy/Not at all/Ghost touches etc.?
Since this is off-Topic i will delete this message after you read it. You shuld open a new Thread where the Problem could be discussed.:good:
Click to expand...
Click to collapse
Nothing at all
sinkoo1979 said:
Nothing at all
Click to expand...
Click to collapse
Try flashing a oreo based stock rom.(or if you only tried oreo then pie), then flash gsi etc
ΒΕΓΑ said:
I would marry if you turn 60fps to 90-120-144 omg plz plz
Click to expand...
Click to collapse
don't you think it would be the least manner to put some pics of your ass when you come around with "marrying-for-asking"? XD :silly::silly: