Related
is there any twrp for the Castor windy?
or even philz, i don't want the dualrecovery
spider623 said:
is there any twrp for the Castor windy?
or even philz, i don't want the dualrecovery
Click to expand...
Click to collapse
what's the problem with dualrecovery?
I flashed dualrecovery and by default the device loads twrp anyway
greetings
MJFox
MJFox78 said:
what's the problem with dualrecovery?
I flashed dualrecovery and by default the device loads twrp anyway
greetings
MJFox
Click to expand...
Click to collapse
nothing wrong with it, i just don't want to flash it every time
Maybe a dumb question, but should it not be enough to replace the "default.prop" in offical twrp for tablet z with the one from the lockeddualrecovery for z2 tab?
I tried it and it seems to work here (backup, advanced wipe, restore).
LazyT said:
Maybe a dumb question, but should it not be enough to replace the "default.prop" in offical twrp for tablet z with the one from the lockeddualrecovery for z2 tab?
I tried it and it seems to work here (backup, advanced wipe, restore).
Click to expand...
Click to collapse
hello
look into pac thread there are a twrp for castor and castor-windy
rcstar6696
But this ist not version 2.8.5.0
LazyT said:
But this ist not version 2.8.5.0
Click to expand...
Click to collapse
I will update it next week and i will provide cwm and philz touch,too
I make an extra thread for it.
rcstar6696 said:
I will update it next week and i will provide cwm and philz touch,too
Click to expand...
Click to collapse
Nice, compiled from source or what are you doing?
I've attached my modified twrp for castor and windy if someone like to test. It's the original twrp for pollux with the default.props from cm12.
LazyT said:
Nice, compiled from source or what are you doing?
I've attached my modified twrp for castor and windy if someone like to test. It's the original twrp for pollux with the default.props from cm12.
Click to expand...
Click to collapse
No i will use the ramdisk from nut s recovery and complie it to an image that all people can flash it
There is an extra program for this but i forgot the Name
LazyT said:
Nice, compiled from source or what are you doing?
I've attached my modified twrp for castor and windy if someone like to test. It's the original twrp for pollux with the default.props from cm12.
Click to expand...
Click to collapse
before I mess up my SGP511 tablet
just wanted to confirm i should run
Code:
fastboot flash boot twrp-2.8.5.0-sgp511.img
to load the recovery image provided by LazyT, right?
Hello
Did you try?
AllGamer said:
before I mess up my SGP511 tablet
just wanted to confirm i should run
Code:
fastboot flash boot twrp-2.8.5.0-sgp511.img
to load the recovery image provided by LazyT, right?
Click to expand...
Click to collapse
Noooo
Fastboot flash recovery twrp-2.8.5.0-sgp511.img
If you fastboot TWRP to the boot sector you'll wipe your kernel. Flash it to the recovery partition.
---------- Post added at 09:59 AM ---------- Previous post was at 09:58 AM ----------
FlyingMik said:
Hello
Did you try?
Click to expand...
Click to collapse
I hope he didn't, not like that.
LazyT said:
Nice, compiled from source or what are you doing?
I've attached my modified twrp for castor and windy if someone like to test. It's the original twrp for pollux with the default.props from cm12.
Click to expand...
Click to collapse
I tested. I confirm it is working perfectly well with the latest cm12.1 nightlies.
So feel Free to work on further versions of trwp
Thanks for your work !
Unlocked Bootloader !!!!!!!!
ScrubberPortRom GPE5.0_LRX21P & GPE5.1_LMY47D!!!
Baseband 10270054-60 GPE5.0_LRX21P
Baseband 10270054-64 GPE5.1_LMY47D
for Sony Xperia Z Ultra LTE/HSPA+ (6833, 6802)
- Made from full system/boot dump of Google Play Edition Z Ultra Android 5.0 LRX21P & Android 5.1 LMY47D
- Rooted with SuperSU by Chainfire
- Busybox installed
- Init.D
Requirements
- LTE Sony Xperia Z Ultra (C6833/C6806)
- HSPA+ Sony Xperia Z Ultra (C6802)
- Be on 4.4.4 & 5.0.2 firmware
- Unlocked Bootloader
Features
- Stock Android 5.0 LRX21P & Stock Android 5.1 LMY47D
- Google Apps
- ART only
- X-Reality in Display Settings+
- Dual Recovery (Clockwork & TWRP) built into boot.img
- Init.D Support
- SD Card Write Permissions enabled
- ScrubbKernel @ Selinux to permissive mode by Scrubber only port Android 5.1 LMY47D
Credits
- DooMLoRD for all his excellent work on our much loved Sony phones!
- The Team Win developers for TWRP
- The ClockWorkMod developers for CWM
- [NUT] for byeselinux.ko
- Chainfire for SuperSU
- zxz0O0 BIG thanks goes to for creating the kernel module which made this possible Selinux OFF !
Changelog
- Android 5.0 LRX21P
- Android 5.1 LMY47D
Bugs:
Errors committed by the developers of Sony
"Fix NO SD BUG"
Not required for those using the latest TWRP.
For sd bug This is because 5.x.x seems to point to: data/media/0
This passage is essential after all full wipe or clean install with old TWRP or CWM, not for dirty flash.
- download terminal emulator from Play Store
And run:
Code:
su
restorecon -FR /data/media/0
Instructions
- Save all information from the internal memory !!!
-Fastboot flash boot.img w/ recovery (use CM boot.img, or comparable)
-Reboot into recovery
- Wipe: system, data, dalvik and cache
-Flash ROM (do not flash gapps packages, gapps are already included)
If you want to donate a project, please contact me via the "Send Private Message". Thanks!
Donate To Me (paypal)
Downloads ScrubberPortRom GPE5.0_LRX21P & GPE5.1_LMY47D
- Android 5.0 LRX21P
Mega
- Android 5.1 LMY47D
drive.google.com
XDA:DevDB Information
ScrubberPortRom GPE5.0_LRX21P & GPE5.1_LMY47D release-keys, ROM for the Sony Xperia Z Ultra
Contributors
scrubber
ROM OS Version: 5.x.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Based On: Stok
Version Information
Status: Testing
Current Beta Version: RC-2.0
Add Porting firmware 5.1 LMY47D
What kind of internal storage bug?
On topic: Nice work scrubber! Just like the user above I'd like to know the steps of the porting procedure.
We don't need 4 pages of posts saying "can't wait" here thanks.
This is a development forum... please treat it as such.
Edit: Apparently nobody is taking any notice of the above.
@scrubber In future, don't even create the thread until you have everything ready to go.
Also, don't request the thread be reopened unless it's to post a download link.
Thread Closed.
Link is up! Downloading now!
Edit: Everything is smooth. Video playback works. Multitasking is noticeably better than other 5.0 builds.
Can this be flashed over scrubber's KitKat port just with wiping data/cache?
alksv said:
Can this be flashed over scrubber's KitKat port just with wiping data/cache?
Click to expand...
Click to collapse
no!!!
scrubber said:
no!!!
Click to expand...
Click to collapse
I fastboot flashed the kernel in your rom so I could install the rom. Do I still need to run the fix in the terminal?
Why is " Save all information from the internal memory !!! " important and how do I get to it?
doctahjeph said:
I fastboot flashed the kernel in your rom so I could install the rom. Do I still need to run the fix in the terminal?
Click to expand...
Click to collapse
no, if this is no problem
d0p3d said:
Why is " Save all information from the internal memory !!! " important and how do I get to it?
Click to expand...
Click to collapse
yes!!
d0p3d said:
Why is " Save all information from the internal memory !!! " important and how do I get to it?
Click to expand...
Click to collapse
I interpreted this as saying this would wipe your internal SD including media. So make sure you have backup up all media/pics beforehand.
Sent from my C6806 using XDA Free mobile app
Can confirm that it is working perfectly. Flashed after wiping system, data and cache. Thanks a lot, scrubber!
texaspledge said:
I interpreted this as saying this would wipe your internal SD including media. So make sure you have backup up all media/pics beforehand.
Sent from my C6806 using XDA Free mobile app
Click to expand...
Click to collapse
Ah, ok thx, if thats the correct interpretation I won't bother backing that up I guess.
In case anyone needs a mirror:
https://mega.co.nz/#!5VY3gCTR!BFkvQZn9yZDboPlSvAlzEy2hdorB43uMxEOftlSHVTw
CRC-32: f7807ecf
MD4: b613dc885bc82a8801747451c58b0733
MD5: 2947b8168a0a60800bff3df203b34778
SHA-1: d985b9527ecdcdcf4f3c7288239d99ab61e8fa12
Feel free to add it to the OP
Thanks for the port @scrubber
what is the boot ;img name i need to fastboot it form the rom zip file?
I have hot booted doomlords kernel (fastboot boot boot.img) to boot into recovery (volume up while seeing doomlords logo), then full wiped, flashed scrubbers excelent port from sdcard1 und tada, everything works perfectly)!
Really good job! Thanks a lot.
alksv said:
Can confirm that it is working perfectly. Flashed after wiping system, data and cache. Thanks a lot, scrubber!
Click to expand...
Click to collapse
Great to hear. Out of curiosity are you still unlocked bootloader without your original TA partition? And camera (pics and video) is working?
I was wondering if the camera bug without our original TA partition was going to hit us on this one. Some GPE users are reporting it with Lollipop as well.
Thanks
where is this doomlords kernel boot file? it is in the rom zip? just flash it? thin install rom with recovery?
madphone said:
I have hot booted doomlords kernel (fastboot boot boot.img) to boot into recovery (volume up while seeing doomlords logo), then full wiped, flashed scrubbers excelent port from sdcard1 und tada, everything works perfectly)!
Really good job! Thanks a lot.
Click to expand...
Click to collapse
Did the same. Stuck in boot loop!
Edit: Tried again with CWM instead of TWRP. Works now!
hello xda
i found this rom yesterday here it is only for d802 but if u have d800 u can try blastagator patch (I am not responsible for for any thing happen to your phone)
youtube video here
this is not my rom
Looks awesome. I like it.
it is stock based or Aosp ? LP or KK ?
stock 5.0.2 @TornadoMiMo
just installed it and what can i say , just great
amin44 said:
stock 5.0.2
Click to expand...
Click to collapse
Google edition 1.5 based rom added some apps and mod
Very nice rom, i almost feel like i buy xperia phone lol, i whuld only sugest to deweloper if he can see this or read, make aroma options, because i feel that there is too mutch of blotver apps from experia, which, i personaly always delete eaven on my xperia phone
note: work on my d800 with blastagator patch and dorimanx kernel
please translate the way i can install the rom to english i don't understand how to install it
based on CM or Stock ?
@GnehWnos just choose the first Suggestion at aroma ,it is stock 5.0.2 based
I installed the rom and I have f2fs cache.
After rom installation i rebooted to recovery to install dorimanx kernel. unfortunately twrp doesn't load. I only see the twrp logo and then my phone reboots.
The rom stucks at a screen "encryption" or something. What can I do?
amin44 said:
stock 5.0.2 @TornadoMiMo
Click to expand...
Click to collapse
I think it is CM13 based. On video, it is displayed "6.0.1".
@Alex93917 it is stock based 5.0.2 see original thread
@lollipo I think your data was encrypted back to stock tot
Can please someone upload somewhere?
The download is totally slow.
intrersting tnx
Too much bloatware.
Wysłane z mojego LG-D802 przy użyciu Tapatalka
This ROM will reflash BOOT,RECOVERY....etc.
You must first replace zen-recovery.img within the ZIP archive, or flash the newest RECOVERY again. Otherwise the RECOVERY is downgraded and can not be accessed.
Installed in all ext4 format, and then backup and restore converted to F2FS(data,cache). Flash Dorimanx 12.0 Kernel is working very good and fast.
Unfortunately, many Xperia APP can't use.
amin44 said:
@GnehWnos just choose the first Suggestion at aroma ,it is stock 5.0.2 based
Click to expand...
Click to collapse
Could you please how to insatall on D800 and where can i download patch?
---------- Post added at 08:56 PM ---------- Previous post was at 08:43 PM ----------
Harris777 said:
Could you please how to insatall on D800 and where can i download patch?
Click to expand...
Click to collapse
Can i install themes?
@Harris777 flash this after rom https://forum.xda-developers.com/att-g2/development/stock-patch-stock-g2-rom-att-t3124809 and no u can not install theme it is stock based
[RECOVERY][UNOFFICIAL][Z2/Z3/Z3C] TWRP 3.0.2-0 for XZDualRecovery (LP) & RecRoot (MM)
Updated TWRP 3.0.2-0 for XZDualRecovery (LP) and RecRoot (MM)
First of all - This is the work of master @shoey63 who build this from Omnirom tree and made several very usefull changes!
Visit his original post for more details and give him a thanks as well!
All what I did is modifing partition layout to backup TA and LTALabel partitions also.
Furthermore I did some tests for Z3C on LP and made this installer.
EDIT: For sure RecRoot has already TWRP (also 3.0.2-0 Recovery from shoey63) but this is a slightly different version (with TA Backup). Actually I only made this that users with MM do not run into problems...
Whats needed
Z2/Z3/Z3C LP with XZDualRecovery installed
or
Z2/Z3/Z3C MM with RecRoot installed
Installation
Flash ZIP via recovery - What a surprise...
Thanks to
@shoey63
@[NUT]
@Wolfbreak
and for sure thanks goes to TeamWin for developing TWRP
Info
20160507 - Removed Z3C_TWRP_3.0.2-0_for_XZDR.zip due to installer problem with older XZDR installations. Use V02 now.
20160513 - V03 - Added support for MM with RecRoot (http://forum.xda-developers.com/z3/general/wip-sony-android-6-0-mm-t3337357)
20160526 - V04 - Now with universal installer for Z2, Z3 and Z3C - It installes automatically the correct recovery for your device!
20160621 - V05 - Added "z2", "z3" and "z3c" to assert check - Some recovery are using this for "ro.product.device"
Screenshots
Don't work for me...
dialiv said:
Don't work for me...
Click to expand...
Click to collapse
No details. No support.
Slim 5.0, dual recovery, tvrp 2.8.x.x, flashing your zip from twrp, say installed. .
But after reboot, same tvrp 2.8 xx
dialiv said:
Slim 5.0, dual recovery, tvrp 2.8.x.x, flashing your zip from twrp, say installed. .
But after reboot, same tvrp 2.8 xx
Click to expand...
Click to collapse
+1
D5803 cihazımdan Tapatalk kullanılarak gönderildi
dialiv said:
Slim 5.0, dual recovery, tvrp 2.8.x.x, flashing your zip from twrp, say installed. . But after reboot, same tvrp 2.8 xx
Click to expand...
Click to collapse
UnsYusuFxD said:
+1
Click to expand...
Click to collapse
Please test V02. And report! This should work for old and new XZDR now
SLiM usesd "old" XZDR installation folder to system/bin - That was the reason.
V02 working
Thanks and congratulation!!
fluffi444 said:
Please test V02. And report! This should work for old and new XZDR now
SLiM usesd "old" XZDR installation folder to system/bin - That was the reason.
Click to expand...
Click to collapse
Working.. Thanks
D5803 cihazımdan Tapatalk kullanılarak gönderildi
works on Android 6 ?
Yes. I installed it on Android 6.0.1 with a locked bootlader and works perfekt.
r0nnie said:
Yes. I installed it on Android 6.0.1 with a locked bootlader and works perfekt.
Click to expand...
Click to collapse
so why when i install busybox or xposed recovery losts ?
I can only boot into recovery, when I press the volume down button when I boot and the green led blink.
Gesendet von meinem D5803 mit Tapatalk
r0nnie said:
Yes. I installed it on Android 6.0.1 with a locked bootlader and works perfekt.
Click to expand...
Click to collapse
This is a bit strange because MM has its recovery in folder /system/etc/mm_twrp_recovery/ - If RecRoot is used
And this is actually not part of my script....
But for sure you can copy recovery.twrp.cpio.lzma manually to this folder /system/etc/mm_twrp_recovery/ for MM (if RecRoot is used)
But it would not be to much hassle to integrade recovery prosition for MM to installer script also.
when i install busybox or xposed zip i cant find recovery
UPDATE
20160526 - V04 - Now with universal installer for Z2, Z3 and Z3C - It installes automatically the correct recovery for your device!
@fluffi444 hey, is it possible that the infamous wifi drops on Z3c MM are somehow connected to RecRoot?
toxic-hero said:
@fluffi444 hey, is it possible that the infamous wifi drops on Z3c MM are somehow connected to RecRoot?
Click to expand...
Click to collapse
Actually I wonder why you ask here. This is only about a bit updated TWRP Recovery for already installed TWRPs setups.
To be honest (and even if I do not know it in particular): I don't think so...
But I'm still on LP and will stay there for longer time - So actually I'm not in the position so say anything regarding this...
20160621 - V05 - Added "z2", "z3" and "z3c" to assert check - Some recoveries are using this for "ro.product.device"
This works with .291 firmware?
Moglie said:
This works with .291 firmware?
Click to expand...
Click to collapse
Actually this depends not on the firmware but on the way the Recovery was installed originally.
It's compatible if you have already your recovery in here: /system/etc/mm_twrp_recovery/recovery.twrp.cpio.lzma
Like it is for RecRoot and this quite new way: http://forum.xda-developers.com/z3-compact/general/recovery-root-mm-575-lb-t3418714
It's not compatible if you use FOTA Recovery.
Is there a way to install the Xposed Framework on the Xperia X with 34.4.A.2.118?
I have UB, root with Magisk with TWRP.
I need help please.
Not for the time being. There's a conflict with security patch which makes the phone go into bootloop. I started with match security patch.
https://forum.xda-developers.com/xperia-x/themes/oreo-xposed-framework-fix-t3861292
Try this
XGEN rom
bootloop on this rom
https://forum.xda-developers.com/xp...m-1-0-5-xperia-x-t3778738/page13#post78164516
wangkeing said:
bootloop on this rom
https://forum.xda-developers.com/xp...m-1-0-5-xperia-x-t3778738/page13#post78164516
Click to expand...
Click to collapse
I try for this rom and it boots successfully.
First you factory reset your device, flash this rom with magisk and selinux permissive. Wait for first boot, then you can flash fix xposed and after that flash xposed.
Good luck!
Flash the official version and works fine
RenkaHinkaru said:
I try for this rom and it boots successfully.
First you factory reset your device, flash this rom with magisk and selinux permissive. Wait for first boot, then you can flash fix xposed and after that flash xposed.
Good luck!
Click to expand...
Click to collapse
I failed again.
1. wipe data/system/cache
2. flash XGEN ROM with magisk and selinux permissive
3. Wait for first boot, and do nothing,then reboot to Recovery
4. flash fix xposed
5. flash xposed-v90-sdk26-arm64-beta3.zip
6. reboot! but the phone bootloop
Maybe I should install the latest .118 firmware through FlashTool again, or xposed version is wrong?
wangkeing said:
I failed again.
1. wipe data/system/cache
2. flash XGEN ROM with magisk and selinux permissive
3. Wait for first boot, and do nothing,then reboot to Recovery
4. flash fix xposed
5. flash xposed-v90-sdk26-arm64-beta3.zip
6. reboot! but the phone bootloop
Maybe I should install the latest .118 firmware through FlashTool again, or xposed version is wrong?
Click to expand...
Click to collapse
My Xposed Fix is only for Stock .118 Deodexed FW and on eXistenZ v7.0.0 includes by default.
You cant use it on every ROM you want becouse it's a system files (framework,jar and services,jar)
all developers makes modifications on this files to make a "mods", so if a custom ROM have difference from stock fw.118 it cause a bootloop.
I can make a fix for you, if you give me a framework.jar and services,jar from this ROM
lubik1 said:
My Xposed Fix is only for Stock .118 Deodexed FW and on eXistenZ v7.0.0 includes by default.
You cant use it on every ROM you want becouse it's a system files (framework,jar and services,jar)
all developers makes modifications on this files to make a "mods", so if a custom ROM have difference from stock fw.118 it cause a bootloop.
I can make a fix for you, if you give me a framework.jar and services,jar from this ROM
Click to expand...
Click to collapse
Thank you very much.
https://drive.google.com/file/d/1lnl6T2Q1zpjaRdelNMvVc56uKIWTWs4Z/view?usp=sharing
wangkeing said:
Thank you very much.
https://drive.google.com/file/d/1lnl6T2Q1zpjaRdelNMvVc56uKIWTWs4Z/view?usp=sharing
Click to expand...
Click to collapse
View attachment 4650477
RenkaHinkaru said:
I try for this rom and it boots successfully.
First you factory reset your device, flash this rom with magisk and selinux permissive. Wait for first boot, then you can flash fix xposed and after that flash xposed.
Good luck!
Click to expand...
Click to collapse
Do you have probleme with fingerprint sensor ? I update Version 1.1-0 (20181017, final) and got this issue.
and are you still on this ROM? Could you please backup you system with xposed fix from twrp and send to me?
I
wangkeing said:
Do you have probleme with fingerprint sensor ? I update Version 1.1-0 (20181017, final) and got this issue.
and are you still on this ROM? Could you please backup you system with xposed fix from twrp and send to me?
I
Click to expand...
Click to collapse
Im using stock rom bro, i dont know.
You can post it in the xgen rom thread
RenkaHinkaru said:
Im using stock rom bro, i dont know.
You can post it in the xgen rom thread
Click to expand...
Click to collapse
Is that stock rom path 6.0 base on stock 34.4.A.2.118 firmware?