F2FS Support
Backup/restore
EFS
Firmware
XDA:DevDB Information
Unofficial TWRP 3.0.x, Tool/Utility for the OnePlus One
Contributors
ketut.kumajaya
katinatez
recovery
device
kernel
Version Information
Status: Stable
Current Stable Version: v3.0.2-0
Stable Release Date: 2016-06-10
Created 2014-12-23
Last Updated 2016-01-27
Downloads
This is flashable through custom recovery, if you prefer fastboot commands extract recovery.img
Code:
adb reboot bootloader
fastboot flash recovery recovery.img
fastboot reboot
Changelog
Code:
[SIZE="4"]
v2.8.7.0.5
Updated
android-6.0 branch
v2.8.6.1
05/18/2015
Encryption
Update F2FS
with Jaegeuk Kim repo
v2.8.6.0.1
04/24/2015
Introduction of
materialised-theme by
ketut.kumajaya new project contributer
v2.8.6.0
03/31/2015
Fixed Sliders on Themes
New Splash screen
v2.8.6.0
03/26/2015
Initial release
v2.8.5.1
02/12/2015
v2.8.4.1
01/25/2015
All fixed
01/24/2015
Update 2.8.4.1
[COLOR="Red"]Bad build[/COLOR]
01/15/2015
Update 2.8.4.0
Fixed screen timeout
01/09/2015
Fixed reboot issues
Updated F2FS
12/22/2014
Fixed Aroma File Manager loading
12/22/2014
Initial Release
twrp 2.8.3.0
[/SIZE]
Still uploading?
I downloaded yesterday an 2.83 version and had problems when flashing roms via otg so i returned to 2.82 . Is this a new 2.83 version ? I think i downloaded it from your afh.
Anyway i will give it a try later.
Thanks for you hard work on this and Temansek
Having lived the life of a flashaholic in just the past weeks, the listed fixes and enhancements in this update are more worth to me than daily sliced bread!
So far no more reboots enabling MTP, copying large nandroid backup files via MTP ( > 1.2GB) onto phone works as well as mounting and file operations on usb sticks via USB-OTG. Also the enhanced/fixed permissions handling will hopefully avoid the manual use of restorecon from now on, will observe.
Haven't yet tried backup to/restore from USB-OTG, but will try eventually.
Thank you @katinatez!
Thanks! It's now available officially!
http://techerrata.com/browse/twrp2/bacon
@katinatez's version has extra features/fixes, need to be aware of that.
What's the "custom theme" included in this build? Did you flash it in recovery or did you extract the img-file and flashed it via fastboot?
fmc000 said:
What's the "custom theme" included in this build? Did you flash it in recovery or did you extract the img-file and flashed it via fastboot?
Click to expand...
Click to collapse
Custom theme is integrated, but you can change it with this others (1080):
http://forum.xda-developers.com/android/themes/theme-twrp-materialised-dark-light-play-t2915584
jcespi2005 said:
Custom theme is integrated, but you can change it with this others (1080):
http://forum.xda-developers.com/android/themes/theme-twrp-materialised-dark-light-play-t2915584
Click to expand...
Click to collapse
So the materialized theme is the one included? I know that you can change themes as you wish, just wanted to know which was the one the OP included in the bundle.
fmc000 said:
So the materialized theme is the one included? I know that you can change themes as you wish, just wanted to know which was the one the OP included in the bundle.
Click to expand...
Click to collapse
It isn't materialized one... but not sure what is, same button structure as default, just minor graphics change...
@katinatez
Excellent work mate! Thx! :good:
Never mind
Love the new look.... Thanks
Happy Merry Christmas to all people of good will. Love and peace to the entire world.
Sent from my 1+1
Just wanted to clarify one thing: I'm using multirom version to do multirom things, can't use this version for multirom right?
Sent From Lollipopified Bacon Goodness!
ek69 said:
Just wanted to clarify one thing: I'm using multirom version to do multirom things, can't use this version for multirom right?
Sent From Lollipopified Bacon Goodness!
Click to expand...
Click to collapse
No, only features are the ones listed.
I serm to have a problem with the timezone. I had to set GMT+2 to have the correct time and I am in Italy, so GMT+1. Never had this problem before.
Did you un/check the DST option?
Update the recovery just now, found a bug. Surprised no one called me out on it. Aroma File Manager would not load. Kinda dejavu all over again with my Philz recovery doing the same. Anyways enough jabbering all fixed now.
Related
bigbiff said:
Youtube video: http://www.youtube.com/watch?v=RIvWVS_Rkxo
Full TeamWin credits are on the TWRP page on the TeamWin website: http://teamw.in/project/twrp2
Introduction:
Team Win Recovery Project or twrp2 for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It's a fully touch driven user interface , no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Key Features:
Touchscreen driven with real buttons and drag-to-scroll
XML-based GUI that allows full customization of the layout true theming!
Settings are saved to the sdcard and persist through reboots
Ability to choose which partitions to back up and which to restore
Ability to choose to compress backups now with pigz (multi-core processor support for faster compression times)
Onscreen keyboard
Decryption of /data
Easy selection of internal/external storage
See changelog below for new features
In addition to the above new features, TWRP features a scripting engine that allows an app to send commands to the recovery for the recovery to perform during startup. We call this scripting engine OpenRecoveryScript. This engine will be put to use immediately in the GooManager app. GooManager will be able to install recoveries automatically for most supported devices. The app will also let you choose to install multiple zips from within Android, wipe cache & dalvik, and run a backup.
We are looking for other talented developers, themers, and device maintainers if they are interested in helping with a free, open source project.
Theming:
Information on TWRP 2 Theming - http://teamw.in/project/twrp2themers
Known Issues:
CWM backups are not compatible - please make a fresh backup in TWRP as soon as you have flashed it
Source Code:
GitHub - https://github.com/omnirom/android_bootable_recovery
Gerrit Instance - http://gerrit.omnirom.org
If you have made your own twrp build for an unsupported device, please let us know. We might add your build to the list of unofficial builds. Bear in mind that we are working hard to add more devices and we may add your device to our official build list later.
Support:
Click http://webchat.freenode.net/?channels=twrp for live support or join us in #twrp on Freenode IRC servers
Click to expand...
Click to collapse
SPECIAL NOTE: "Alternative recoveries" only work with ROM's built after 20140510 and only on the Nutella Kernel.
Download: meticulus.co.vu
XDA:DevDB Information
TWRP for Galaxy Player 5, Tool/Utility for the Samsung Galaxy Player 4.0, 5.0
Contributors
Meticulus
Version Information
Status: Testing
Created 2014-09-05
Last Updated 2014-09-11
Dude you are awesome
Sent from my YP-G70 using XDA Free mobile app
also work with beanstalk last build ?? btw great job again :good:
lildhiel08 said:
also work with beanstalk last build ?? btw great job again :good:
Click to expand...
Click to collapse
Yep?
Meticulus said:
Yep?
Click to expand...
Click to collapse
btw ur new rom bro ? nexus5 wel it work for switch internal
lildhiel08 said:
btw ur new rom bro ? nexus5 wel it work for switch internal
Click to expand...
Click to collapse
Its not my ROM. Its @kykint ☺
Meticulus said:
Its not my ROM. Its @kykint ☺
Click to expand...
Click to collapse
oh ..sorry bro
Status 7 error
edit: nevermind, I didn't go thru the alternative recovery install procedure...duh
Hi Meticulus,
Thanks for all you do !!
When I try to install, I get "This package is for m470 devices; this is a "YP-G70" "
beeewell said:
edit: nevermind, I didn't go thru the alternative recovery install procedure...duh
Hi Meticulus,
Thanks for all you do !!
When I try to install, I get "This package is for m470 devices; this is a "YP-G70" "
Click to expand...
Click to collapse
I double checked everything... looks like you downloaded the wrong one. Make sure to download from here: http://www.meticulus.co.vu/p/twrp-2630-for-galaxy-player-5.html
EDIT: alternative recovery procedure not needed, just flash in current recovery. m470 is Hisense Sero 7 Pro.... Definately downloaded the wrong one...
Meticulus said:
I double checked everything... looks like you downloaded the wrong one. Make sure to download from here: http://www.meticulus.co.vu/p/twrp-2630-for-galaxy-player-5.html
Click to expand...
Click to collapse
Thanks again. That's exactly what I did !!! :good:
All I am receiving is cloud storage when I try to download recovery.
iselfseeallah said:
All I am receiving is cloud storage when I try to download recovery.
Click to expand...
Click to collapse
You need to either "Request the Desktop site" or install the MEGA app from the playstore.:highfive:
Not, I will do with out.
OP updated with new link...
Meticulus said:
OP updated with new link...
Click to expand...
Click to collapse
I have Clockwork installed and it acts as if it flashes OK but when I reboot or restart its reverted back to clockwork. Thoughts?
cvondra said:
I have Clockwork installed and it acts as if it flashes OK but when I reboot or restart its reverted back to clockwork. Thoughts?
Click to expand...
Click to collapse
Um try READING the op.
I'm a little late to the party, but I've gotten my hands on an YP-G70. I tried installing TWRP on it, but CWM complaints about it being the wrong version. I couldn't see any different versions of it...I've also tried flashing it with Rashr flash tool, but that one also says it's not a valid recovery.
Any hints as to what I can do next?
I have been attempting to install CM12 / Carbon 5.1.1. I have worked my way up from GB to CM 11 / Carbon KK 4.4.4 then I get stuck.
After installing on reboot I get an initial Nutella logo for a few seconds and then the screen goes black (although you can tell it is still backlit) and then nothing. Left it for a couple of hours just in case it required a long install time... nothing. I can get it into this rudimentary recovery fwiw.
So came across this, Is it still mandatory to install TWRP 2.8.0.0? If so could someone kindly upload or add a new link please. Most are to Mega which is now kaput.
I tried installing from Slim 4.4.2 ( Beanstock is also on Mega but it only has TWRP 2.6.5) as suggested somewhere but no go either.
Thanks for breathing life back into my Player 5, I am eager to try Lollipop on it.
Thanks in advance.
How do I install it? I am on stock firmware, do I need a custom firmware first?
tiwas said:
I'm a little late to the party, but I've gotten my hands on an YP-G70. I tried installing TWRP on it, but CWM complaints about it being the wrong version. I couldn't see any different versions of it...I've also tried flashing it with Rashr flash tool, but that one also says it's not a valid recovery.
Any hints as to what I can do next?
Click to expand...
Click to collapse
I'm stuck at the same place. The error msg seems to imply its for the USA version:
"This package is for yp-G70, venturi,venturi_USA" devices. This device is a "herring".
SlimRoms is a custom android operating system. The main goal is to offer users a slimmed down but still feature rich alternative to other android operating systems.
The entire SlimTeam work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through GitHub and you can stop by the public Gerrit to submit patches of any type.
SlimLP is the project name for SlimRoms based on Android 5.1 Lollipop and offers the following original features:
Slim Dialer
A full replacement of the official Google closed source dialer with added features. - We've got you covered.
Privacy guard
Disable unnecessary permissions set by app developers. - Privacy is part of the experience.
Slim Center
Downloads, contact information, system app removal. - More fun than you can shake a stick at.
System-Wide Keyboard Controls
Rotation, cursor control, optional emoticons..etc. - You'll be tapping away to your heart's content.
Custom Shortcuts WIP
Hardware keys, Navigation Ring, Navigation Bar, Lockscreen, Tiles, Notifications etc. - Customize it the way you like it.
Important links:
slimroms.eu - The official webpage where you find everything you need to know about SlimRoms.
Downloads (Unofficial builds for now) - also download GAPPS
Installation instructions - Follow these steps to the letter if you're about to install SlimRoms on your device.
Latest Changelog - Read here if you want information on changes in latest build.
FAQ - The most frequent asked questions with answers.
Kernel Source - The source of your device's kernel.
Get in touch! - Contact SlimRoms at these places if you have questions, requests or feedback.
Google+
Twitter
Facebook
Xda Forums
Disclaimer: SlimRoms are not responsible for any damages to your device.
XDA:DevDB Information
SlimLP - Togari, ROM for the Sony Xperia Z Ultra
Contributors
OmarEinea, SlimRoms
Source Code: https://github.com/SlimRoms
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Version Information
Status: Beta
Current Beta Version: 0.5
Beta Release Date: 2015-08-16
Created 2015-01-26
Last Updated 2015-08-16
Bugs:
- Minor bugs, same as CM, Mainly:
Some issues while enabling Adaptive brightness
Misc stuff:
Old Screenshots or Newer ScreenShots - (from my Z1 Compact)
Bugtracker - to report your bugs
SlimLP kernel contains some nice features like:
Intellidemand Governor
SIO & FIOPS I/Os
Sound Control
MultiROM Support
THE ROM DOESN'T CONTAIN RECOVERY!
Though you can get yourself one by flashing one of these:
Fota TWRP 2.8.x.x recovery for togari
MultiROM TWRP recovery
I don't see the ROM. How to install?
@OmarEinea thank you for all the hard work, you've brought a couple lollipop Roms to our device now and have been keeping them up to date. Great job, much appreciated. How is battery life on this? And is the kernel able to make backups or is it like the cyanogenmod recovery?
theinspector said:
@OmarEinea is the kernel able to make backups or is it like the cyanogenmod recovery?
Click to expand...
Click to collapse
SlimLP has TWRP, so yes.
Yay finally! No what happened to the slimgapps for lollipop?!?
Sent from my Xperia Z Ultra using Tapatalk
---------- Post added at 07:50 PM ---------- Previous post was at 07:49 PM ----------
Whoops nvm should've looked closer!
Sent from my Xperia Z Ultra using Tapatalk
I will try flashing again in a bit, but right now I have slow data on LTE and WiFi which is normally fast. Typical speeds right now are very slow. Recovery doesn't work either. Will edit my post after I flash again
UPDATE: Tried flashing again with the same issues.
Just flashed this ROM and really liking it - very fast will be daily driver for now thanks for the great ROM
Any chance y'all could look into supporting the GPE edition also? Loved slim on my G2 and Galaxy Nexus.
Thanks!
theinspector said:
@OmarEinea thank you for all the hard work, you've brought a couple lollipop Roms to our device now and have been keeping them up to date. Great job, much appreciated. How is battery life on this? And is the kernel able to make backups or is it like the cyanogenmod recovery?
Click to expand...
Click to collapse
theinspector said:
I will try flashing again in a bit, but right now I have slow data on LTE and WiFi which is normally fast. Typical speeds right now are very slow. Recovery doesn't work either. Will edit my post after I flash again
UPDATE: Tried flashing again with the same issues.
Click to expand...
Click to collapse
SlimLP doesn't have recovery yet, you should be able to have recovery through many different ways,
my recommended one is to use MultiROM mode, it's fantastic
ApertureAndroid said:
SlimLP has TWRP, so yes.
Click to expand...
Click to collapse
It's true SlimKat had TWRP, but SlimLP has aosp recovery until now, though TWRP should be included in it soon (I hope )
lexdad86 said:
Any chance y'all could look into supporting the GPE edition also? Loved slim on my G2 and Galaxy Nexus.
Thanks!
Click to expand...
Click to collapse
I'll check and see.
bgpepi said:
I don't see the ROM. How to install?
Click to expand...
Click to collapse
Well just like any other ROM (in addition to flashing SuperSU)
http://slimroms.net/index.php/installation
so just after flashing GAPPS, flash SuperSU and you'll be good to go.
Regards,
Omar.
Tried to use Multirom TWRP to F2FS format and clean install but it doesnt work. So convert back to ext4 and clean installed. Worked well but couldn't recognise my 64GB card which is exFaT formatted. So going to convert to FAT32 before trying again.
Works fast and furious. So will be using as daily for now.
Thank you Omar... you and the rest of the devs have been fast and furious getting LP roms out for us.
How to enter the recovery? I just can't manage how to do that.
Jecmenn said:
How to enter the recovery? I just can't manage how to do that.
Click to expand...
Click to collapse
Hi and i had the problem with recovery for me the most easy way is to enter dual recovery with flashtool and 108_DualRec_Jackie099.img kernel and simply Hot boot the kernel .Its not permanent recovery everytime you need you have to use flashtool and the hot boot kernel.I can make a video if you want.
really fast and extremely easy to set up.
this runs smoother and faster than the GPE port.
face smart-lock is extremely useful!
Viper4Android works ? Thx BTW.
Jecmenn said:
How to enter the recovery? I just can't manage how to do that.
Click to expand...
Click to collapse
veskostoev said:
Hi and i had the problem with recovery for me the most easy way is to enter dual recovery with flashtool and 108_DualRec_Jackie099.img kernel and simply Hot boot the kernel .Its not permanent recovery everytime you need you have to use flashtool and the hot boot kernel.I can make a video if you want.
Click to expand...
Click to collapse
SlimLP doesn't have recovery yet, so I recommend you to install the TWRP recovery from MultiROM through fastboot in /recovery partition,
or use the whole MultiROM mode as it's brilliant and very useful
this way you'll have recovery out side of the ROM and you'll be able to update and do everything without losing the recovery.
Regards,
Omar.
OmarEinea said:
SlimLP doesn't have recovery yet, so I recommend you to install the TWRP recovery from MultiROM through fastboot in /recovery partition,
or use the whole MultiROM mode as it's brilliant and very useful
this way you'll have recovery out side of the ROM and you'll be able to update and do everything without losing the recovery.
Regards,
Omar.
Click to expand...
Click to collapse
Thank you! MultiROM is actually very cool and solved my problem.
Omar,
Would you have any idea why formatting data and cache to f2fs would cause the ROM to boot endlessly after the kernel boot up?
Meaning the booting continues at the SlimLP boot animation for a long time. I tried doing it by converting to f2fs after a clean install with both data and cache as ext4 initially and also formatting to f2fs before doing a clean install. Both just gets stuck at the booting animation. It just keeps running
I am also running this rom with multirom and it is great, with more features be added later like dark slim, etc. ?
Also the battery life is quite good as well, getting about 5 hours sot all lte no wifi with location on and syncing 5 email accounts
hello,
after installation I have no access to the sd card. not possible with titanium backup restore apps.
I will update this thread whenever a new TWRP build for hammerhead comes out....
What is it for?
Those who want to flash CyanogenMod (myfluxi) builds with Code Aurora Forum (CAF) optimizations, will require this modded TWRP as those builds will not flash with regular TWRP recovery.
Download
https://dl.twrp.me/hammerheadcaf
How to install this recovery?
(Make sure your bootloader is unlocked.)
Flash the downloaded recovery.img with fastboot. (fastboot flash recovery recovery.img)
Previous Build
Download
(Current TWRP-CAF version: 3.0.0)
rghost.net/7gBSJsDMZ
How to install this recovery?
(Make sure your bootloader is unlocked.)
Flash the download in any custom recovery to switch to TWRP CAF.
OR
Extract downloaded zip, flash the extracted recovery.img with fastboot. (fastboot flash recovery recovery.img)
TWRP-CAF latest sources (based on CM13): https://bitbucket.org/kylon/android_device_lge_hammerheadcaf_twrp
Build and source provided by @kylon ! Thanks!
Thanks
Enviado desde mi Nexus 5 CAF mediante Tapatalk
Fransis88 said:
Thanks
Enviado desde mi Nexus 5 CAF mediante Tapatalk
Click to expand...
Click to collapse
Welcome is it working fine?
I changed the script installation, simply I took the script of a no caf and overwrite a caf, ie used the TWRP without alteration and it worked. The net effect (stability, speed, compatibility) is the same?
davidsonsjesus said:
I changed the script installation, simply I took the script of a no caf and overwrite a caf, ie used the TWRP without alteration and it worked. The net effect (stability, speed, compatibility) is the same?
Click to expand...
Click to collapse
Sure but you have to edit your updater-script for each nightly. Moreover, if you are using an updater tool like CyanDelta then TWRP for CAF is more than welcome.
With another unofficial version I use, there's no differences between AOSP and CAF versions. TWRP for CAF works with 'hammerheadcaf' instead of 'hammerhead' when flashing a rom. That's it.
Primokorn said:
Sure but you have to edit your updater-script for each nightly. Moreover, if you are using an updater tool like CyanDelta then TWRP for CAF is more than welcome.
With another unofficial version I use, there's no differences between AOSP and CAF versions. TWRP for CAF works with 'hammerheadcaf' instead of 'hammerhead' when flashing a rom. That's it.
Click to expand...
Click to collapse
Change every night is no problem for me since I customize various items for installation, but a hybrid TWRP is great. The topic of this hybrid is or there is another (not yet tried)?
davidsonsjesus said:
Change every night is no problem for me since I customize various items for installation, but a hybrid TWRP is great. The topic of this hybrid is or there is another (not yet tried)?
Click to expand...
Click to collapse
Not that I'm aware of.
davidsonsjesus said:
Change every night is no problem for me since I customize various items for installation, but a hybrid TWRP is great. The topic of this hybrid is or there is another (not yet tried)?
Click to expand...
Click to collapse
you should rather create a standalone flashable zip package with all your tweaks so that you wouldn't have to modify the package every day...
Yash98 said:
you should rather create a standalone flashable zip package with all your tweaks so that you wouldn't have to modify the package every day...
Click to expand...
Click to collapse
My settings are not only Tweaks, ranging from the delete apps on rom expendable to me the restoration of personal apps installed on the system and inserting lines in build.prop among others.
davidsonsjesus said:
My settings are not only Tweaks, ranging from the delete apps on rom expendable to me the restoration of personal apps installed on the system and inserting lines in build.prop among others.
Click to expand...
Click to collapse
Yep deleting apps, adding personal apps, inserting lines in build.prop can be done with a flashable zip. Though you may have to read a little to create the updater-script.
Yash98 said:
Yep deleting apps, adding personal apps, inserting lines in build.prop can be done with a flashable zip. Though you may have to read a little to create the updater-script.
Click to expand...
Click to collapse
Friend I have not any problems with scripts, only it's more convenient for me to include in the rom zip my custom structure, only this.
So this is a hybrid Recovery, can we use Non-CAF roms with this one? and is multirum useable?
Would love to see the possibility using a CAF rom as Primary and Android M as Secundaire !
@davidsonjesus Best way is the one you find convenient.
Added TWRP 2.8.7.1
Guys, how do I revert back to a hammerhead recovery? Tried to flash the twrp, but got an error message!
mat738 said:
Guys, how do I revert back to a hammerhead recovery? Tried to flash the twrp, but got an error message!
Click to expand...
Click to collapse
Download the AOSP version from TWRP website then flash the .img from your CAF TWRP or use fastboot flash recovery recovery.img
Anyone have zips with modified splash?
w0uter said:
So this is a hybrid Recovery, can we use Non-CAF roms with this one? and is multirum useable?
Would love to see the possibility using a CAF rom as Primary and Android M as Secundaire !
Click to expand...
Click to collapse
Didn't see an answer to this. Is this downwards compatible with regular ROM's?
C0BRA01 said:
Didn't see an answer to this. Is this downwards compatible with regular ROM's?
Click to expand...
Click to collapse
No only CAF
If I flash caf twrp, can I make and restore a backup of a non caf rom ?
I'm on chroma now, and want to try cm13 caf.
[RECOVERY] [06/16/16] TWRP 3.1.0 - TeamWin Recovery Project
TeamWin is proud to present TWRP 3.0.2-0 for the Samsung Galaxy Note EDGE (Exynos/Qualcomm International)!
Youtube video: http://www.youtube.com/watch?v=RIvWVS_Rkxo
Full TeamWin credits are on the TWRP page on the TeamWin website: http://teamw.in/project/twrp2
Introduction:
Team Win Recovery Project or twrp2 for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It's a fully touch driven user interface , no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Key Features:
Touchscreen driven with real buttons and drag-to-scroll
XML-based GUI that allows full customization of the layout true theming!
Settings are saved to the sdcard and persist through reboots
Ability to choose which partitions to back up and which to restore
Ability to choose to compress backups now with pigz (multi-core processor support for faster compression times)
Onscreen keyboard
Decryption of /data
Easy selection of internal/external storage
See changelog below for new features
In addition to the above new features, TWRP features a scripting engine that allows an app to send commands to the recovery for the recovery to perform during startup. We call this scripting engine OpenRecoveryScript. This engine will be put to use immediately in the GooManager app. GooManager will be able to install recoveries automatically for most supported devices. The app will also let you choose to install multiple zips from within Android, wipe cache & dalvik, and run a backup.
We are looking for other talented developers, themers, and device maintainers if they are interested in helping with a free, open source project.
Download
In Attached Files. It's zip files.Flash via custom recovery
Changelog 22 Feb
-TWRP 3.0 (lot of change)
-Build with CM13.0
-Fix some minor bug
-Add full support for F2FS format
Changelog for 3.0.3.x
Build recovery from last source cm-14.1
Changelog 3.1.0
Update recovery from last commit in twrp/cm-14.1 for 915F/915FY/915G (for the moment only)
XDAevDB Information
915F 915FY 915T 915W8 915G 915P 915R4 915V 915TMO TWRP, Tool/Utility for the Galaxy Note Edge
Contributors
micky387
my source code: https://github.com/micky387
Version Information
Status: Stable
Created 2015-06-07
Last Updated 29-03-2017
Here TAR version.
You can Flash it by ODIN (in AP or PDA) :good:
EDIT
28/03/2017
Update 915F/915FY/915G to 3.1.0
29/03/2017
Add Tmo and Can variant
Thank works beautifully.
SM-N915FY
kernel: r16
http://forum.xda-developers.com/note-edge/orig-development/tw-emotroid-team-htcspain-t3111963
Rom: v3
http://forum.xda-developers.com/note-edge/development/rom-wip-note-edge-n915f-nk5-deodexed-t2977321
You`re the man. Thanks. I didn`t have time to flash anything but so far it`s working great.
Just tried it on rooted stock custom. Works like a charm. Nice job.
Thanks guys. Nobody test in T-Mobile variante ?
micky387 said:
Thanks guys. Nobody test in T-Mobile variante ?
Click to expand...
Click to collapse
I'm on T-Mobile. Just running a rooted basic ROM right now. Just flashed a theme is all.
micky387 said:
Thanks guys. Nobody test in T-Mobile variante ?
Click to expand...
Click to collapse
I installed on my T-mobile, and seems like it's working without any problems. I'm already made a backup and finished without a hiccup. Thank you for your work.
Sent from my SM-N915T using Tapatalk
@micky387
Great work!
May I update the guide?
Thanks all. Yes you can update your guide. So if all is all right,i can put T-Mobile in stable and build another variant.
Link's death
Information on TWRP 2 Theming - http://teamw.in/project/twrp2themers
Fooox1 said:
Link's death
Information on TWRP 2 Theming - http://teamw.in/project/twrp2themers
Click to expand...
Click to collapse
Yes. It's new twrp website and all are not uploaded
I'm going to try this on my spring variant any reason not to
Dont worry. I have build for sprint variant. It's in upload.
After,i build for verizon variant
Thank you so much! Looking forward to testing out the Sprint variant.
OK. So OP updated.
PLease read carefully OP. I take lot of my free time to write it and build .So please,dont pm me for nothing
I have build twrp for all variant device.
For device "in test" please test and report here if it working or not and say what version do you download.Thanks.
ATTENTION FOR USERS 915F and 915FY download again recovey in OP. I have fixed permission for theming.
Other variant still ok
Can any of the variants be tested on a n915g?
Beetle84 said:
Can any of the variants be tested on a n915g?
Click to expand...
Click to collapse
Sorry for mistake name. 915DT (tbltedt) is 915G. I have edited OP
micky387 said:
Sorry for mistake name. 915DT (tbltedt) is 915G. I have edited OP
Click to expand...
Click to collapse
Legend! Thanks mate.
Beetle84 said:
Legend! Thanks mate.
Click to expand...
Click to collapse
You can hit THANKS button if you like it
Analogous to my other projects I present here a custom ROM on stock basis. This ROM is based on the 10.0 DBT FW. It is not supposed to become something big. Actually it was only meant for me, but I thought, maybe it would help some of you who don't want to flash the FWs with Odin.
The ROM is mostly "stock-alike" because I'm no friend of "heavy modifications" anymore.
Neither I nor XDA is responsible for any damage to your device. You flash it at your own risk!
Before you start, make a Nandroid(Backup) of your system. Safe is safe!
Features
Based on last Android 10.0 DBT XXU3BTK1 FW
DBT as CSC active
Stock Kernel
Bluetooth Patch
Removed RMM
Odexed (for better Performance)
Knox-free
A bit debloated (Knox- and MS-stuff)
Stock alike
Flashbable through Custom Recovery
Changelog
Changelog v4.0
Rebased to XXU3BTK1 Android 10.0 (Security Patch from 01.11.2020)
Hopefully Fixxed Bluetooth-Probleme - Should work witout BT Patcher.
Changelog v3.1
Fixxed bluetooth-probs
Patching of bluetooth didnt work anymore, so you have to use now Bluetooth Library Patcher as Magisk Modul, otherwise you lose every reboot your bluetooth connections
Changelog v3.0
Rebased to XXU3BTH4 Android 10.0 (Security Patch from 01.09.2020)
Changelog v2.0
Rebased to XXU3BTFN Android 10.0 (Security Patch from 01.07.2020)
Be on android 10 fw, otherwise it wont work!!!
Changelog v1.0
Initial Release
Rebased to XXS3ATE3 Android 9.0 (Security Patch from 01.05.2020)
What do you need?
actual Custom Recovery, >>here!!<<
my FW (Zip)
are familiar with the matter of flashing:winki:
How to get Root?
You have to patch the TWRP yourself
Alternatively i can provide the patched TWRP see latest twrp file above
Pictures
None, since everybody knows the Stock FWs
Download
Stock ROM Q 10.0 (AndroidFileHost)
Download Modem/Bootloader
Flashable_T510_Firmware (flash it through recovery - follows next!!)
How-To flash:
Place the Zip on the internal or better external memory.
Boot into Recovery -> Hold Vol. Up at restart
--> Fullwipe if coming from another ROM
Then click on install in TWRP
Searches the folder where you put the Zip in
And flash them now by clicking on the zip and dragging the slider to the right at TWRP
Then reboot -> Reboot to System = Boot with Magisk!
The reboot with a fullwipe usually takes a while - can take up to 10 minutes. So keep calm.
Troubeshooting
If you got an bootloop or it stays on samsung logo, make a fullwipe. Otherwis it wont boot correctly into root partition.
I had the same problems. Only a fullwipe solved it.
Credits
Samsung
topjohnwu
MrWaehere
ianmcd
Magendanz
twrp
and others i forgot
If you like it, hit thanks.
XDA:DevDB Information
Stock ROM, ROM for the Samsung Galaxy Tab A series
Contributors
hanspampel
ROM OS Version: 10.x Q
Version Information
Status: Stable
Current Stable Version: 30.08.2020
Created 2020-06-01
Last Updated 2020-09-29
hanspampel said:
Analogous to my other projects I present here a custom ROM on stock basis. This ROM is based on the 9.0 DBT FW. It is not supposed to become something big. Actually it was only meant for me, but I thought, maybe it would help some of you who don't want to flash the FWs with Odin.
The ROM is mostly "stock-alike" because I'm no friend of "heavy modifications" anymore.
Neither I nor XDA is responsible for any damage to your device. You flash it at your own risk!
Before you start, make a Nandroid(Backup) of your system. Safe is safe!
Features
Based on last Android 9.0 DBT XXS3ATE3 FW
DBT as CSC active
Stock Kernel
Bluetooth Patch
Removed RMM
Odexed (for better Performance)
Knox-free
A bit debloated (Knox- and MS-stuff)
Stock alike
Flashbable through Custom Recovery
Changelog
Changelog v1.0
Initial Release
Rebased auf XXS3ATE3 Android 9.0 (Security Patch vom 01.05.2020)
What do you need?
actual Custom Recovery, >>here!!<<
my FW (Zip)
are familiar with the matter of flashing:winki:
How to get Root?
You have to patch the TWRP yourself, alternatively I can provide the patched TWRP.
Pictures
None, since everybody knows the Stock FWs
Download
Stock ROM Pie 9.0 (AndroidFileHost)
Download Modem/Bootloader
Flashable_T510_Firmware (flash it through recovery - follows next!!)
How-To flash:
Place the Zip on the internal or better external memory.
Boot into Recovery -> Hold Vol. Up at restart
--> Fullwipe if coming from another ROM
Then click on install in TWRP
Searches the folder where you put the Zip in
And flash them now by clicking on the zip and dragging the slider to the right at TWRP
Then reboot -> Reboot to System = Boot with Magisk!
The reboot with a fullwipe usually takes a while - can take up to 10 minutes. So keep calm.
Credits
Samsung
topjohnwu
MrWhaere
ianmcd
Magendanz
twrp
and others i forgot
If you like it, hit thanks.
XDA:DevDB Information
Stock ROM, ROM for the Samsung Galaxy Tab A series
Contributors
hanspampel
ROM OS Version: 9.x Pie
Version Information
Status: Stable
Current Stable Version: 01.06.2020
Created 2020-06-01
Last Updated 2020-06-01
Click to expand...
Click to collapse
MOD EDIT : No need to quote the ENTIRE first post ...
Does this rom lag or feel sluggish to you?
Sent from my SM-T510 using Tapatalk
Not more like on Stock. Samsung didnt made a good job with this Tab. It feels more sluggish as on my old Tab A 2016. Maybe its the SoC or the OneUi stuff.
No problem here, using it with custom kernel with oc and everything works fine. As fast as nexus stock
klemen241 said:
No problem here, using it with custom kernel with oc and everything works fine. As fast as nexus stock
Click to expand...
Click to collapse
which kernel are you using on this rom? is it this one?
https://forum.xda-developers.com/galaxy-tab-a/development/kernel-infinity-kernel-1-2-ask1-t4028739
I thought it was made for LineageOS?
zfk110 said:
which kernel are you using on this rom? is it this one?
https://forum.xda-developers.com/galaxy-tab-a/development/kernel-infinity-kernel-1-2-ask1-t4028739
I thought it was made for LineageOS?
Click to expand...
Click to collapse
Yea that's the one. Works with stock too, I checked the frequencies after flashing and it's oc
klemen241 said:
Yea that's the one. Works with stock too, I checked the frequencies after flashing and it's oc
Click to expand...
Click to collapse
What about if you play games? like Pokémon go will it runs hot??
zfk110 said:
What about if you play games? like Pokémon go will it runs hot??
Click to expand...
Click to collapse
I only use it for Netflix, so no idea. I think it's safe
hanspampel said:
Not more like on Stock. Samsung didnt made a good job with this Tab. It feels more sluggish as on my old Tab A 2016. Maybe its the SoC or the OneUi stuff.
Click to expand...
Click to collapse
Its failing CTS profile. any idea how to fix it? on stock firmware without kernel
zfk110 said:
Its failing CTS profile. any idea how to fix it? on stock firmware without kernel
Click to expand...
Click to collapse
no.. safetynet now does hardware checks
Update to Q-based BTFN FW.
Changelog v2.0
Rebased auf XXU3BTFN Android 10.0 (Security Patch vom 01.07.2020)
Be on android 10 fw, otherwise it wont work!!!
Read Troubleshooting in OP!
Thanks for the update.
I am currently using your v1.0 (Android 9).
To update to v2.0 (Android 10) i have to flash stock rom XXU3BTFN first and repeat the procedure to patch TWRP, flash TWRP, flash multidisabler ...?
does the rom work with the T510N version also?
@seppfx
Yepp, you need latets bootloader and twrp etc. Otherwise it won't boot.
@AndroSysQ
Im not confirm what's the difference between both models.
hanspampel said:
@seppfx
Yepp, you need latets bootloader and twrp etc. Otherwise it won't boot.
@AndroSysQ
Im not confirm what's the difference between both models.
Click to expand...
Click to collapse
from what i have read it has 3GB instead of 2GB ram and 64GB instead of 32GB storage.
I think the rest of the internal components are the same.
It is the wifi(T510/T510N) version and not the LTE(T515/T515N)
Hmm try it out if you want. I don't guarantee it will work. If so, it could be that it show not the correct Infos about your tab, ram, emmc etc.
@seppfx
You can push the twrp inside the AP_ file, delete recovery.img and rename twrp to this one. So you don't have to format Data again.
I'm on Android 10. And as you know that TWRP version is T510XXS3ATE3 and TWRP is still not available for T510XXU3BTFN So how am I suppose to do all these stuffs. Can I flash your file through TWRP on Android 9 ?
Please clear my doubts.
No, you must be on android 10, as i said before. Flash Magendanz TWRP. There is a q twrp in his thread.
Can you please post a link of that TWRP ? I'm unable to find that.
Take a look at here.