*** I AM NOT RESPONSIBLE FOR YOU DAMAGING YOUR DEVICE IN ANY WAY. THIS METHOD OF ROOT IS TESTED BY ME ON THE DEVICE SM-T230/T230UN.. ***
THE SM-T230 HAS NO KNOX AND THEREFORE WONT TRIP ANYTHING
THINGS NEEDED
> TAB 4 WIFI SM-T230/T230UN WITH USB DEBUGGING ENABLED AND DRIVERS INSTALLED
> ODIN 3.09 + TWRP 2.8.0.1 BOTH WHICH CAN BE FOUND IN THIS ZIP FILE >> DOWNLOAD
THE GUIDE
1. Download and extract the above zip to an easy to access location.
2. put the device into download mode by holding power+vol down+home and connect to computer with usb cable.
3. now run odin 3.09 (as administrator) and select AP and then select the openrecovery-twrp-2.8.0.1-degas.tar file
4 .hit start in odin and as soon as odin is finished the device turns off for reboot DONT let android boot, quickly press power+vol up+home to boot into twrp recovery
5. now pres reboot > system and then slide to install root
6. when device has rebooted to android open superuser installer app and follow instructions to update then install su binary updates then reboot.
7. now download busybox and install.. (from gplay)
you now have rooted your tab 4 sm-t230/t230un
EDIT: now if you wanted to or needed to you can now add init.d support to your rooted device by following the instructions here
dont forget to use the thanks button
Does this trip Knox I have a 2 year full coverage warranty will I be able to unroot with out Samsung ever knowing???
Smt230 and t230 nu do not have Knox in them at all. Only the carrier versions do. So no it will not trip Knox.☺
Sent from my SM-T230NU using XDA Free mobile app
krakenthor said:
Smt230 and t230 nu do not have Knox in them at all. Only the carrier versions do. So no it will not trip Knox.☺
Sent from my SM-T230NU using XDA Free mobile app
Click to expand...
Click to collapse
So I can restore it without them ever knowing awesome ? you made my day thank you.
---------- Post added at 02:50 AM ---------- Previous post was at 02:22 AM ----------
Inside 4ndroid said:
Firstly i have spent the best part of 5 days searching for a root method on the sm-t230 tab 4 and got no where until about 5 mins ago and just for reference and others i am going to put this guide here..
*** I AM NOT RESPONSIBLE FOR YOU DAMAGING YOUR DEVICE IN ANY WAY. THIS METHOD OF ROOT IS TESTED BY ME ON THE DEVICE SM-T230 IF IT WORKS FOR OTHER DEVICES THEN PM ME AND I WILL MAKE A LIST OF SUPPORTED DEVICES.. ***
THINGS NEEDED
> TAB 4 WIFI SM-T230 WITH USB DEBUGGING ENABLED AND DRIVERS INSTALLED
> ADB TOOLS FOR INSTALLING SUPERSU
> ODIN 3.07 + TWRP + SUPERSU ALL WHICH CAN BE FOUND IN THIS ZIP FILE >> DOWNLOAD
THE GUIDE
1. Download and extract the above zip to an easy to access location.
2. put the device into download mode by holding power+vol down+home and connect to computer with usb cable.
3. now run odin 3.07 and select AP and then select the twrp_2.7.1.0_SM-T230.tar.md5 file
4 .hit start in odinand as soon as odin is finished the device turns off for reboot DONT let android boot quickly press power+vol up+home to boot into twrp recovery
5. now goto advanced > adb sideload
6. now open a cmd on computer and use adb to sideload the SuperSU.zip file
eg, adb sideload location/of/zip/SuperSu.zip
7. twrp will now install supersu and binarys
8. reboot as normal to android and download rootchecker form gplay and check for root also granting root access when asked..
9. now also download busybox and install..
you now have rooted your tab 4 sm-t230
EDIT: while i am currently testing i have just found that certain system app remover apps seem to see the /system as not mounted although this app does work >> System App Remover (ROOT) -gplay
i am trying to work on fixing this with possible workarounds...
dont forget to use the thanks button
Click to expand...
Click to collapse
Does this work on sm-230NU
gonzalezb said:
So I can restore it without them ever knowing awesome ? you made my day thank you.
---------- Post added at 02:50 AM ---------- Previous post was at 02:22 AM ----------
Does this work on sm-230NU
Click to expand...
Click to collapse
You are very welcome gonzaleb. None of the 7 inch tabs carry Knox. And yes the twer root from Odin works on smt230nu also
Sent from my SM-T230NU using XDA Free mobile app
Chnage recovery
Please switch to this recovery the current one in your zip broke when i tried flashing a debloated stock rom this one doesn't.
http://www.reddit.com/r/AndroidQues...hats_the_easiest_method_for_rooting_a_galaxy/
I didn't have any problems but I have added it to the OP than dude..
gonzalezb said:
Please switch to this recovery the current one in your zip broke when i tried flashing a debloated stock rom this one doesn't.
http://www.reddit.com/r/AndroidQues...hats_the_easiest_method_for_rooting_a_galaxy/
Click to expand...
Click to collapse
Could you possibly give me a link to the rom you used so i can test thanks..
Inside 4ndroid said:
Could you possibly give me a link to the rom you used so i can test thanks..
Click to expand...
Click to collapse
Its the only Stock ROM for T230UN on galaxy tab 4 development.
gonzalezb said:
Its the only Stock ROM for T230UN on galaxy tab 4 development.
Click to expand...
Click to collapse
Ok thanks.. i am currently looking into developin a rom for our device only reason i really asked thanks
Inside 4ndroid said:
Ok thanks.. i am currently looking into developin a rom for our device only reason i really asked thanks
Click to expand...
Click to collapse
Awesome cant wait for it yeah when i flashed that i could not get keyboard working at all and Bluetooth broke.
Hey!
I am getting this tab in 3 weeks, is there any "1 click root" method like vroot? If not can someone help me what to type in CMD? (i've installed cwm recovery on other my devices and custom roms too but they were way easier to root with one click methods)
You would need to use v1.0 for now. Safariking is fixing the v1.5 to make it all correct again. Have fun in the meantime folks and a good new year!
Sent from my SM-T230NU using XDA Premium 4 mobile app
Much Easier...
FYI, change step 5 to then reboot system from twrp and choose to root the rom when prompted.
after booting into the OS using TWRP prompts of "play" and "normal" installed binaries and rooted no problems. no sideload or adb necessary.
TWRP handled this all just fine for me.
I also had to use Odin 3.09. 3.07 failed for me 3 times in a row.
(win 8.1/sm-t230un) wifi
I followed the instructions, but after it updated the firmware (first stage), it rebooted and went straight back into the normal OS, no changes.
Now when I try to access the download mode it won't - just keeps rebooting to normal OS.
Anyone any ideas? The Log bit from Odin says the following:
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
I've attached a screenshot of the ODIN window.
Thanks,
Matt
elation said:
I followed the instructions, but after it updated the firmware (first stage), it rebooted and went straight back into the normal OS, no changes.
Now when I try to access the download mode it won't - just keeps rebooting to normal OS.
Anyone any ideas? The Log bit from Odin says the following:
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
I've attached a screenshot of the ODIN window.
Thanks,
Matt
Click to expand...
Click to collapse
it sounds like your problem lies with step 4 and 5 after the flashing in odin is complete DONT let it reboot to android... when odin finishes and the tablet turns off and back on press and hold press power+vol up+home until it reboots the first samsung logo at which point let go of the power button and continue to vol up+home until you see TWRP logo now when in twrp just select REBOOT and then SYSTEM after android boots proceed to step 6 and 7 and you should now have root..
Awesome thanks for the help!
You should give credit to the original post as it did from ShinySide. This guide has been around for quite sometime now.
http://forum.xda-developers.com/tab-4/general/root-galaxy-tab-4-7-t230-t2835264
Added: it's still working on the latest firmware.
Can't remember too well: I too let it reboot after odin but no problem going into TWRP (note the difference in combo buttons) and select Reboot and it will has a choice to root. No need to odin again.
Got there eventually, just need to find some decent roms for it now!!
hi, just bought this awesome tab. quick question, where can I download the driver?
Related
Uploading CWMrecovery.tar to phone via Odin3 1.3
after reboot i still have samsung 2e recovery mode.
I found here CWMrecovery.tar http://forum.xda-developers.com/showthread.php?t=788099&page=24
also flased CMWR from another source and same thing.
Removed battery, pressed vol-down and connected usb
aveter yellow triangle i put battery back
In Odin phone detected with yellow square
I didnot check anything, Auto reboot and Reset F.Time was checked
Also i selected file by PDA button and after in check activaded near this button
log:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> zImage
<ID:0/008> recovery.bin
<ID:0/008> Removed!!
<ID:0/008> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Added!!
phone reboting working OK
lets say adb reboot recovery
phone boot to Android system recovery (2e)
AGAIN
where is my CWMR? what i flashed?
trying to use rom manager but got error signature verification failed in Android system recovery (2e)
I did not post 10 messages and cannot ask it in that topic
PS: I also have captivate and without any problem rooted it, unlocked and reflashed it to 2.2
verizon makes me ploblems since motorola v710, get it now and etc.
And my bluetooth not working after rooting
I start Googling tango found that peoples have same problems on rooting phones after update.
droidforums dot net
forum/samsung-fascinate/117399-lost-bluetooth-capability-after-update.html
Anybody can say me that I need to reflash?
And provide link to download and string name in Odin
Another problem, I cannot update firmware. I lived in canada and to activate phone I need to be in states.
That's an old CWM. You want the new CWM for all ROMs. Can't post a link, but it's in the devs forum by jt. Flash the Odin file and you should be fine.
Sent from my SCH-I500 using XDA App
Its latest cwmr 3.0.0.8
But... I can only run it if I choose "reboot into recovery" from rom manager.
3 buttons or adb reboot recovery or even reboot recovery from advanced menu of cwmr start samsung e2 recovery. Is it correct? How to access cwmr if I will not be able to boot?
Sent from my SCH-I500 using XDA Premium App
Hello, so this is what happened i saw a rom From http://forum.xda-developers.com/show....php?t=2154790
After that i got to 80% then it failed on Odin now i'm stuck on a Odin Mode (NOT Download mode)
Odin sees my phone kies does not
My phone info
Samsung note 1 (SHV-E160L) Korean version (has been rooted)
Any Help guides is help full By the way is this fixable?? i hope its not bricked i only got it 5~6 weeks ago
i also got a video on youtube with my problem Please help!
/watch?v=JWr67N122r8&feature=youtu.be
Adam1337 said:
Hello, so this is what happened i saw a rom From http://forum.xda-developers.com/show....php?t=2154790
After that i got to 80% then it failed on Odin now i'm stuck on a Odin Mode (NOT Download mode)
Odin sees my phone kies does not
My phone info
Samsung note 1 (SHV-E160L) Korean version (has been rooted)
Any Help guides is help full By the way is this fixable?? i hope its not bricked i only got it 5~6 weeks ago
i also got a video on youtube with my problem Please help!
/watch?v=JWr67N122r8&feature=youtu.be
Click to expand...
Click to collapse
posted link is not working remove your battery and connect it to pc and do the three button combo to get the odin mode and flash your original stock firmware first
sangalaxy said:
posted link is not working remove your battery and connect it to pc and do the three button combo to get the odin mode and flash your original stock firmware first
Click to expand...
Click to collapse
Try this link http://www.youtube.com/watch?v=JWr67N122r8
i try it came up with the same screen flash it failed
Adam1337 said:
Try this link http://www.youtube.com/watch?v=JWr67N122r8
i try it came up with the same screen flash it failed
Click to expand...
Click to collapse
is your odin still able to recoganise the devise and which firmware are you using to flash
sangalaxy said:
is your odin still able to recoganise the devise and which firmware are you using to flash
Click to expand...
Click to collapse
Odin is still able to find my phone. the firmware i use is stock rom ( HOME_E160L.UH24.1821_CL966093_REV02_user_low_ship.tar )
From http://www.general-files.org/downlo...821_CL966093_REV02_user_low_ship.tar.md5.html
Kies can't find my phone so recovery is not a option
Adam1337 said:
Odin is still able to find my phone. the firmware i use is stock rom ( HOME_E160L.UH24.1821_CL966093_REV02_user_low_ship.tar )
From http://www.general-files.org/downlo...821_CL966093_REV02_user_low_ship.tar.md5.html
Kies can't find my phone so recovery is not a option
Click to expand...
Click to collapse
maybe the firmware is the problem try flashing another and use the latest odin for flashing
http://samsung-updates.com/device/?id=SHV-E160L
http://www.sammobile.com/firmwares/1/?model=SHV-E160L&pcode=LGT#firmware
try using any of these
sangalaxy said:
maybe the firmware is the problem try flashing another and use the latest odin for flashing
http://samsung-updates.com/device/?id=SHV-E160L
http://www.sammobile.com/firmwares/1/?model=SHV-E160L&pcode=LGT#firmware
try using any of these
Click to expand...
Click to collapse
i downloaded it tried with the latest odin3 didn't work
Adam1337 said:
i downloaded it tried with the latest odin3 didn't work
Click to expand...
Click to collapse
on the first post u said that you flashed a rom may I know which one was it and please give me a link to it the link is not working
sangalaxy said:
on the first post u said that you flashed a rom may I know which one was it and please give me a link to it the link is not working
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2154790
Adam1337 said:
http://forum.xda-developers.com/showthread.php?t=2154790
Click to expand...
Click to collapse
did you followed the exact guide please try one more time correctly
may be something with that rom
and use odin 3.07
sangalaxy said:
did you followed the exact guide please try one more time correctly
may be something with that rom
and use odin 3.07
Click to expand...
Click to collapse
this is the part i did
Recommended Steps For Flashing.
Put phone into download mode
In odin select Your valila copy of the kies update and put in PDA option box
then select the posted TWRP and put in phone.
click start to flash and watch the progress,
AS SOON AS IT finishes the flash with writing the second recovery image hold down VOL UP AND VOL DOWN for the reboot, the device is now in recovery with twrp
you can either do adb sideload (choose advansed on main menu) to apply the patch or adb push and place on the sd-card (Note in recovery the phones internal memory is /emmc and the sd-card is /sd-card , so it you dont have a sd-card inserted you must use adb push filename.zip /emmc/)
once the file is sideloaded ( or installed via twrp install menu option for adb push users)
then do a factory reset once more.
Enjoy your Cherry ROM
Cherry Rom Single Download Link updated 26/may/2013
Adam1337 said:
this is the part i did
Recommended Steps For Flashing.
Put phone into download mode
In odin select Your valila copy of the kies update and put in PDA option box
then select the posted TWRP and put in phone.
click start to flash and watch the progress,
AS SOON AS IT finishes the flash with writing the second recovery image hold down VOL UP AND VOL DOWN for the reboot, the device is now in recovery with twrp
you can either do adb sideload (choose advansed on main menu) to apply the patch or adb push and place on the sd-card (Note in recovery the phones internal memory is /emmc and the sd-card is /sd-card , so it you dont have a sd-card inserted you must use adb push filename.zip /emmc/)
once the file is sideloaded ( or installed via twrp install menu option for adb push users)
then do a factory reset once more.
Enjoy your Cherry ROM
Cherry Rom Single Download Link updated 26/may/2013
Click to expand...
Click to collapse
yeah am saying try again with odin 3.07 and post a ss
sangalaxy said:
yeah am saying try again with odin 3.07 and post a ss
Click to expand...
Click to collapse
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Adam1337 said:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
i have some problem too, help me pls
Solution
Adam1337 said:
Hello, so this is what happened i saw a rom From http://forum.xda-developers.com/show....php?t=2154790
After that i got to 80% then it failed on Odin now i'm stuck on a Odin Mode (NOT Download mode)
Odin sees my phone kies does not
My phone info
Samsung note 1 (SHV-E160L) Korean version (has been rooted)
Any Help guides is help full By the way is this fixable?? i hope its not bricked i only got it 5~6 weeks ago
i also got a video on youtube with my problem Please help!
/watch?v=JWr67N122r8&feature=youtu.be
Click to expand...
Click to collapse
My Dear Friend Just Install a Recovery Like CWM OR TWRP
Your Problem Will Be Solved
[solved]How To Root Samsung Galaxy Note SHV-E160L (New Method)
Basic Requirements:
Samsung Galaxy Note (SHV-E160L)
Computer
USB data Cable
Phone Charger (You won’t expect your phone to die of the battery during rooting)
Now we move on to our step by step procedure. (Do follow each and every step and read them carefully to avoid any problem for which we will not be responsible.)
Root Samsung SHV-E160L
Procedure To Root Samsung Galaxy Note
1. First you have to download all the drivers for Samsung SH-E160L on your Computer.
2. The second and most important thing to do is, enabling USB debugging. For this, you will find Developer options in your Settings option and then Enable USB Debugging.
Developer Options
In Android 4.2.2 the Developer mode is hidden and to unhide it, go to Settings and then in about option go to System Information. Inside this, you will find Software information, and then there you will see “More” option, inside which you will get Build Number. Tap on this option for 5-8 times and then a message will appear, “You are now a Developer” which means that the developer option is now shown under your settings option that was earlier not present.
3. Now the next step is to download vRoot(search in google and download) and install it on your Computer.
4. Now open vRoot and then mount your Samsung Galaxy Note to your computer through a USB cable.
5. The vRoot will automatically search for your smartphone once its connected to your computer and it will automatically detect when your phone is attached.
6. Now, click on your phone name in vRoot and in the next window that appears, you will see a root button. Just, click on it.
7. The vRoot software will automatically start rooting the phone and will automatically install SuperSU app in it.
8. Now you have Successfully Rooted your Samsung Galaxy Note SHV-E160L. To verify that you have successfully rooted your phone, go to your menu and then search for SuperUser app. If you found that app then it means the device is successfully rooted and if not, then please repeat the process carefully.
Note: Your Manufacturer Warranty gets Void when you root your phone. It means that they will charge you for any damage that you cause to your device. So proceed after making your mind and making clear of what are you doing. WE ARE NOT RESPONSIBLE FOR ANY DAMAGE THAT YOU CAUSE TO YOUR DEVICE DURING ROOTING.
If for any reason you want to Rollback all you have done, then go to Play Store and just Download SuperSU (ChainFire) and install it. After installation, open the app, move to Settings and then select Full Unroot. Your device will be brought back to the earlier stage.
Please anyone who have tried to root this device please help me..i want to root this dwvice because i want to swap my memories..user available is too low..cant install hd games..thanks in advance..godbless
Sent from my SHV-E220S using xda app-developers app
You can use the Framaroot for this. I have used it and it rooted my phone with ease. Please use the version compatible for S3 or please read thoroughly the instructions. Have a great day.
Sent from my SHV-E220S using xda app-developers app
kjedznolimits said:
You can use the Framaroot for this. I have used it and it rooted my phone with ease. Please use the version compatible for S3 or please read thoroughly the instructions. Have a great day.
Sent from my SHV-E220S using xda app-developers app
Click to expand...
Click to collapse
Used it as indicated and worked!
Samsung Galaxy Pop SHV-E220s ROM Root How?
Samsung Galaxy Pop SHV-E220s
Hello guys.... I'm looking for link on how to root Samsung Galaxy Pop SHV-E220s...
Is there any Custom Rom for this device? I tried searching the web only to find nothing... i need some help...
If there's no custom rom for Samsung SHV-e220s, does the ROM for Samsung S3 will work?
How i wish to convert my SHV-e220s into local / international version...
Thanks in advance! Your help is very much appreciated...
kjedznolimits said:
You can use the Framaroot for this. I have used it and it rooted my phone with ease. Please use the version compatible for S3 or please read thoroughly the instructions. Have a great day.
Sent from my SHV-E220S using xda app-developers app
Click to expand...
Click to collapse
Framaroot doesn't work on 4.1.2 NA2. Any other suggestions?
With na2, i try to do this, install cwm recovery by SH, copy update-supersu 1.93.zip in extSdcard, boot in cwm recovery by power+home+vol up, install update-supersu 1.93.zip,reboot. Install busybox from google play. It worked!
Sent from my LG-V500 using Tapatalk
larrylong said:
With na2, i try to do this, install cwm recovery by SH, copy update-supersu 1.93.zip in extSdcard, boot in cwm recovery by power+home+vol up, install update-supersu 1.93.zip,reboot. Install busybox from google play. It worked!
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
Thanks. But I suppose installing cwm recovery by SH itself requires root access!!! Any help?
whoknowshimself said:
Thanks. But I suppose installing cwm recovery by SH itself requires root access!!! Any help?
Click to expand...
Click to collapse
Install SH recovery.tar by Odin
---------- Post added at 06:29 PM ---------- Previous post was at 06:27 PM ----------
whoknowshimself said:
Thanks. But I suppose installing cwm recovery by SH itself requires root access!!! Any help?
Click to expand...
Click to collapse
No, u install SH recovery.tar by Odin only
larrylong said:
Install SH recovery.tar by Odin
---------- Post added at 06:29 PM ---------- Previous post was at 06:27 PM ----------
No, u install SH recovery.tar by Odin only
Click to expand...
Click to collapse
Thanks. Can u provide a working link to SH recovery?
I got it
It's easy.
Go to this link fsrv1.sayanogen.com/Pop and download "GalaxyPOP_CWM_SH.tar".
Install it by ODIN and reboot in Recovery Mode. Install the supersu from the sdcard and you get it.
Special thanks to sktjdgns1189.
Bruno Scog said:
It's easy.
Go to this link fsrv1.sayanogen.com/Pop and download "GalaxyPOP_CWM_SH.tar".
Install it by ODIN and reboot in Recovery Mode. Install the supersu from the sdcard and you get it.
Special thanks to sktjdgns1189.
Click to expand...
Click to collapse
Thanks. I'll try the link and let the others know the result.
Bruno Scog said:
It's easy.
Go to this link fsrv1.sayanogen.com/Pop and download "GalaxyPOP_CWM_SH.tar".
Install it by ODIN and reboot in Recovery Mode. Install the supersu from the sdcard and you get it.
Special thanks to sktjdgns1189.
Click to expand...
Click to collapse
Thanks to your comment, I've successfully rooted my Galaxy Pop SHV-E220S. Here's the instruction for everybody else:
1. First download the CWM recovery from: http://fsrv1.sayanogen.com/Pop/GalaxyPOP_CWM_SH.tar
2. Flash the file through ODIN with default configurations; import the "GalaxyPOP_CWM_SH.tar" to "AP" section of ODIN.
3. Download flashable supersu zip file.
3. Go to recovery by holding up "Volume Up + Home + Power" buttons.
4. Install the "supersu" through "Install zip from SD Card".
5. Done. You can also install busybox from market.
I successfully rooted my ND2 firmware (latest version) using this method.
whoknowshimself said:
Thanks to your comment, I've successfully rooted my Galaxy Pop SHV-E220S. Here's the instruction for everybody else:
1. First download the CWM recovery from: http://fsrv1.sayanogen.com/Pop/GalaxyPOP_CWM_SH.tar
2. Flash the file through ODIN with default configurations; import the "GalaxyPOP_CWM_SH.tar" to "AP" section of ODIN.
3. Download flashable supersu zip file.
3. Go to recovery by holding up "Volume Up + Home + Power" buttons.
4. Install the "supersu" through "Install zip from SD Card".
5. Done. You can also install busybox from market.
I successfully rooted my ND2 firmware (latest version) using this method.
Click to expand...
Click to collapse
Please can somebody help me to guide about this ODIN and AP section of ODIN. how i can run/execute these things?
and please give a link of " flashable supersu.zip " file
what about if supersu needs an already rooted device ? as mentioned here ( in RED color )
http://forum.xda-developers.com/showthread.php?t=1538053
regards.
ODIN and Flashable SuperSU
oralover2006 said:
Please can somebody help me to guide about this ODIN and AP section of ODIN. how i can run/execute these things?
and please give a link of " flashable supersu.zip " file
what about if supersu needs an already rooted device ? as mentioned here ( in RED color )
http://forum.xda-developers.com/showthread.php?t=1538053
regards.
Click to expand...
Click to collapse
Hi
The link to the flashable file or "CF-Root" is provided in the link you mentioned! look at the "download" and then "CWM / TWRP / MobileODIN installable ZIP" section at the first post. here is the link: http://download.chainfire.eu/451/SuperSU/UPDATE-SuperSU-v2.01.zip
For ODIN download and help, go to the following link. A full instruction is also provided there.
http://www.sammobile.com/firmwares/3/?download=29067
Good luck
whoknowshimself said:
Hi
The link to the flashable file or "CF-Root" is provided in the link you mentioned! look at the "download" and then "CWM / TWRP / MobileODIN installable ZIP" section at the first post. here is the link: http://download.chainfire.eu/451/SuperSU/UPDATE-SuperSU-v2.01.zip
For ODIN download and help, go to the following link. A full instruction is also provided there.
http://www.sammobile.com/firmwares/3/?download=29067
Good luck
Click to expand...
Click to collapse
Thanks whoknowshimself
will try and inform, if any problem, will ask
SuperSu: there is mentioned !!! SuperSU requires a rooted device !!! what it mean? if this SuperSu required already rooted device then how this will root any non-rooted device.
one more thing, when connecting device thru cable to PC and issuing command " adb devices " it returns " list of devices attached "
is this problem due to drivers of my device? where i can find & download drivers?
regards.
any help??
oralover2006 said:
Thanks whoknowshimself
will try and inform, if any problem, will ask
SuperSu: there is mentioned !!! SuperSU requires a rooted device !!! what it mean? if this SuperSu required already rooted device then how this will root any non-rooted device.
one more thing, when connecting device thru cable to PC and issuing command " adb devices " it returns " list of devices attached "
is this problem due to drivers of my device? where i can find & download drivers?
regards.
Click to expand...
Click to collapse
oralover2006 said:
any help??
Click to expand...
Click to collapse
Hi
Dear friend
Simply ignore the "SuperSU requires a rooted device", and you're done. I've done the same!
For Samsung mobile drivers, simply refer to the this post: http://forum.xda-developers.com/showthread.php?t=961956
With these new guides in mind, stick to the instruction and BINGO! You will have a rooted device soon! Post here your success to help the others :good:.
whoknowshimself said:
Hi
Dear friend
Simply ignore the "SuperSU requires a rooted device", and you're done. I've done the same!
For Samsung mobile drivers, simply refer to the this post: http://forum.xda-developers.com/showthread.php?t=961956
With these new guides in mind, stick to the instruction and BINGO! You will have a rooted device soon! Post here your success to help the others :good:.
Click to expand...
Click to collapse
thanks for your interest to help me.
Installed KIES from Samsung, installed Minimal ADB from xda, now adb works.
got ODIN latest version,
boot my device while pressing Home+Volume Down+Power
this shows a screen which is in Korean or Chinese
pressed Volume Up + Power
this brings device in ODIN Mode
execute ODIN, only select AP and give the file GalaxyPOP_CWM_SH.tar and press Start
it shows in small window (text box) on left side as below;
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
and reboot my device in normal mode.
I powered off my device and boot it in recovery by press Power Up + Home + Power
but when it comes in recovery, it is showing previous (actual installed) recovery because there is very few options in it.
i re-tried three times all steps but failed ...
what to do now? it showing " succeed 1 " but actually not.
.
oralover2006 said:
thanks for your interest to help me.
Installed KIES from Samsung, installed Minimal ADB from xda, now adb works.
got ODIN latest version,
boot my device while pressing Home+Volume Down+Power
this shows a screen which is in Korean or Chinese
pressed Volume Up + Power
this brings device in ODIN Mode
execute ODIN, only select AP and give the file GalaxyPOP_CWM_SH.tar and press Start
it shows in small window (text box) on left side as below;
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
and reboot my device in normal mode.
I powered off my device and boot it in recovery by press Power Up + Home + Power
but when it comes in recovery, it is showing previous (actual installed) recovery because there is very few options in it.
i re-tried three times all steps but failed ...
what to do now? it showing " succeed 1 " but actually not.
.
Click to expand...
Click to collapse
Hmmm... Seems odd. I successfully rooted NA2 and ND2. What is your current firmware version?
whoknowshimself said:
hmmm... Seems odd. I successfully rooted na2 and nd2. What is your current firmware version?
Click to expand...
Click to collapse
baseband version : E220sksand1
build number: Jzo54k e220sksand2
Hey,
I have a samsung S3, I9300. I used a version of cyangenmod, a lillipop one for a while but I got a lot of troubles with, everytime the phone is down, and crashing. Yesterday, I found it blocked, it doesn't want to go on.
I tried to use Odin to install a new android but I got a problem :
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried many versions of odin, used as administrator and nothing changed.
Please help me, I really need the phone for work tomorrow.
Thank you guys.
Gate11 said:
Hey,
I have a samsung S3, I9300. I used a version of cyangenmod, a lillipop one for a while but I got a lot of troubles with, everytime the phone is down, and crashing. Yesterday, I found it blocked, it doesn't want to go on.
I tried to use Odin to install a new android but I got a problem :
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried many versions of odin, used as administrator and nothing changed.
Please help me, I really need the phone for work tomorrow.
Thank you guys.
Click to expand...
Click to collapse
Download another ROM preferably a KitKat Rom(Your choice). But since ODIN is blocked you'll have to flash it via your custom recovery. If you don't have a custom recovery:
Goto the Playstore
Download "TWRP Manager (ROOT)"
Open app
Grant Permission(on SU)
Select "Device Name"
Find "Samsung Galaxy S3 i9300"
Select "Recovery Version to install"
Select the latest one(The one very first at the top is latest available)
Hit "Install Recovery"
Make sure you have WiFi as it will now start to download the files..
If something like "Ensure the partition...... /dev/block/.." pops up; Hit "YES"
exonerare said:
Download another ROM preferably a KitKat Rom(Your choice). But since ODIN is blocked you'll have to flash it via your custom recovery. If you don't have a custom recovery:
Goto the Playstore
Download "TWRP Manager (ROOT)"
Open app
Grant Permission(on SU)
Select "Device Name"
Find "Samsung Galaxy S3 i9300"
Select "Recovery Version to install"
Select the latest one(The one very first at the top is latest available)
Hit "Install Recovery"
Make sure you have WiFi as it will now start to download the files..
If something like "Ensure the partition...... /dev/block/.." pops up; Hit "YES"
Click to expand...
Click to collapse
The problem is that the phone is blocked, i can't access or turn on. Only Download mode
Gate11 said:
The problem is that the phone is blocked, i can't access or turn on. Only Download mode
Click to expand...
Click to collapse
Sounds like the phone is bricked.
You have to return to stock S3 via download mode and start the rooting again if ODIN still works in Download Mode.
Do you know how to?
exonerare said:
Sounds like the phone is bricked.
You have to return to stock S3 via download mode and start the rooting again if ODIN still works in Download Mode.
Do you know how to?
Click to expand...
Click to collapse
No, i don't know, I installed unofficial cyagenmod via odin but it's not working now
Gate11 said:
No, i don't know, I installed unofficial cyagenmod via odin but it's not working now
Click to expand...
Click to collapse
Follow this video https://www.youtube.com/watch?v=4NMTWvXQPjk
Read the description.
Good Luck.
exonerare said:
Follow this video
Read the description.
Good Luck.
Click to expand...
Click to collapse
That's what I was doing actually, i'm trying to download a new ROM now.
doesn't work, any other idea please?
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
@Gate11: try to repartition, Link
Take 4.3-set, of course, and if it contains no PIT-file, take this from 4.1.
rp158 said:
@Gate11: try to repartition, Link
Take 4.3-set, of course, and if it contains no PIT-file, take this from 4.1.
Click to expand...
Click to collapse
The links are dead :/
@Gate11, they aren't dead. They're Mega-links, download via your PC-browser or Mega-app.
rp158 said:
@Gate11, they aren't dead. They're Mega-links, download via your PC-browser or Mega-app.
Click to expand...
Click to collapse
I know me.ga but the files were deleted.
@Gate11, shame, then take this german site to download or search by yourself.
TWRP 3.0.2 for Samsung Galaxy [email protected] J5(2016)Description:
Bugs
- Brightness slider
- PC mounting MTP (but adb should work)
__________________________________________________________________________________________________
INSTALLATION(Instructions)
Code:
1. Install device usb drivers and Odin
2. Power off the device.
3. Boot to download mode (VOLUME DOWN/HOME/POWER).
4. Volume UP once.
5. Open Odin as an administrator, connect the device to a usb port,
and make sure a blue button appears and says "Added" in description on the left.
6. Select AP or PDA for older Odin and search for the downloaded tar file.
7. Uncheck auto reboot from the second tab.
8. Start flash and you should see the succeeded command.
9. Unplug the device and long press POWER until it powers off or remove the battery.
10. Reboot to TWRP and enjoy! (VOLUME UP/HOME/POWER).
Many thanks vaibhavpandeyvpz!:good:
Tested model SM- J510H(FN)@ J5(2016) for other models not yet verified
ROOT J510 ( tested model J510H / J510FN / J510F / J510GN )
Flash zip SU
https://download.chainfire.eu/969/SuperSU/UPDATE-SuperSU-v2.76-20160630161323.zip
___________________________________________________________________________________
Ver / TWRP 2.8.7.0 fix
http://forum.xda-developers.com/showpost.php?p=68624038&postcount=28
Nice Bro!! Thank you for your work
Btw does it works in my J5108 lollipop 5.1.1? :highfive:
Recommended Installation Flow:
Flash TWRP via ODIN
Reboot to Recovery (TWRP)
Flash latest SuperSU zip (anything > 2.46)
Deleted
Got Root !::good:
All thanks vaibhavpandeyvpz!!!:good:
That's great!
A huge step forward in the development of SM-J510
Thank you Bro! ????
Me too.
Got Root access on SM-J510GN. Thanks for the great work!
Deleted
Hi guys,
Just tried it on SM-J510GN, but flash failed:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Click to expand...
Click to collapse
On the phone screen it showed something about flash being prevented by security lock or similar. Maybe I was using wrong Odin? Any thoughts?
andre6b said:
Hi guys,
Just tried it on SM-J510GN, but flash failed:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
On the phone screen it showed something about flash being prevented by security lock or similar. Maybe I was using wrong Odin? Any thoughts?
Click to expand...
Click to collapse
Bro have you enabled USB Debugging in Developer Options in Settings app? It'd be better
Enable OEM Unlock in Developer options and also remove all Google accounts before proceeding to flash using ODIN. Otherwise your device will be stuck in boot loop (with Samsung boot screen).
Sent from my SM-J510GN using XDA-Developers mobile app
Yuen.Jason22 said:
Bro have you enabled USB Debugging in Developer Options in Settings app? It'd be better
Click to expand...
Click to collapse
It was off! Well, thanks, will retry now
---------- Post added at 09:22 AM ---------- Previous post was at 09:09 AM ----------
By the way, will Samsung's updates still work after rooting?
andre6b said:
It was off! Well, thanks, will retry now
---------- Post added at 09:22 AM ---------- Previous post was at 09:09 AM ----------
By the way, will Samsung's updates still work after rooting?
Click to expand...
Click to collapse
OTA updates probably won't, I guess
If you have already flashed TWRP recovery, then KNOX counter would have been triggered and no updates and warranty from Samsung. :crying:
But you can always flash new Samsung firmwares via Odin
just go to Samsung firmwares website and search for your model number and download the new updates manually
Hi
There is some bug in this recovery,
After I install it, when I tried to make a factory reset from the settings, the phone keep booting to recovery again and agian after the wipe. even if i choose reboot>system in twrp it keep rebooting into recovery, until I flashed the stock recovery again.
Can you fix this problem please? my device is J510FN.
Thank you very much!
Brightness bug is only in slider on the task bar ? Can I change the level of the brightness in settings ?
Cuz i need this function but i want to delete all.of trashes which samsung gave me . Last question if I will flash device to.orgginal software KNOX flag will be returning to correctly status and i shouldn't have problems with warranty?
Huee said:
Brightness bug is only in slider on the task bar ? Can I change the level of the brightness in settings ?
Cuz i need this function but i want to delete all.of trashes which samsung gave me . Last question if I will flash device to.orgginal software KNOX flag will be returning to correctly status and i shouldn't have problems with warranty?
Click to expand...
Click to collapse
Once you tripped KNOX to 0x1, it would be recorded at a E-Fuse which permanently marked that you have void the warranty. Samsung customer service centres would refuse to repair your device
I tried this methid and installed recovery image sucessfully. But after flashing Superuser.zip my phone stuck on Samsung logo. My model is J510FN. What may cause the problem. Any help is apprciated.
---------- Post added at 08:55 PM ---------- Previous post was at 08:52 PM ----------
XtremeX said:
Enable OEM Unlock in Developer options and also remove all Google accounts before proceeding to flash using ODIN. Otherwise your device will be stuck in boot loop (with Samsung boot screen).
Click to expand...
Click to collapse
Tried it all. Stuck on Samsung Animation after flashing superuser.zip
Will this trigger the knox counter on the phone?
cilmanalo said:
Will this trigger the knox counter on the phone?
Click to expand...
Click to collapse
Of course flashing TWRP via Odin will trigger Knox 0x1 then no warranty
Yuen.Jason22 said:
Of course flashing TWRP via Odin will trigger Knox 0x1 then no warranty
Click to expand...
Click to collapse
Oh that's unfortunate. Will flash after warranty then haha