Related
Hello everyone, I have a few questions / issues regarding this phone and android in general, here it goes:
Voice Talk: what are the differences between the two apps (the one with the green and the one with the blue background colors)? They seem to do the same things to me.
Energy saving: the energy saving implementation doesn't seem too "smart" to me. I'm cool with setting reduced energy configurations like lower brightness and turning off bluetooth etc when the battery treshold kicks in, but I'd expect it to restore my setup once the battery level goes above the treshold again. Atm I have to manually undo all the changes that the battery saving functionality does, basically once a day. Isn't there a "smarter" app that restores my settings before the energy saving mode kicks in?
The battery: I've streamed 30 min of music from the device to my car's bluetooth stereo, and it removed 26% of the battery charge. I'm on fw KE2 cause it seems that KE7 is even worse when it comes to power consumption. Still, isn't it too much?
Volume: I've turned it all the way up both with the side button and inside settings -> sounds (all 4 of them). Still, if someone in my office is talking I miss a sms reception etc. It never happened to me when I had the 5800 express music, so I'm not deaf
App notifications: I left my phone near my bed, there is at least 3 out of 4 bars of 3G signal, facebook is set on 30 min updates, accuweather on 3 hours, info-costs every hour, the phone never turned off nor lost the 3g coverage, yet it missed completely or partially a LOT of updates
App settings: app settings also seem a bit random. I have an app called noLed to show led notifications on the screen when it's locked. I had enabled it, checked the "start noled after phone reboot" and all, and even if the phone never even rebooted, after a day or two I went it and the first checkbox (activate NoLed) was misteriously turned off...
Thanks everyone,
TD
tylerdurden83 said:
Hello
What are the differences between Maps,
Maps are MAPPING Latitude Is a precise location for locating friends in the nearby location and Navigator? Voice guided navigation walking driving ..
jje
Click to expand...
Click to collapse
JJEgan said:
tylerdurden83 said:
Hello
What are the differences between Maps,
Maps are MAPPING Latitude Is a precise location for locating friends in the nearby location and Navigator? Voice guided navigation walking driving ..
jje
Click to expand...
Click to collapse
Not that I'm not following your logic, it just seems kinda silly to have 3 apps for doing something that 1 app would be enough to do. For example, it's like having Street View as another external application, even thought it's just clearly a Maps "add-on".
Click to expand...
Click to collapse
Yes true but a lot of users are incapable of using stuff that requires effort and need big shiny widgets and hand holding .
jje
mini bump!
Some GS2 issues / questions
Hello everyone, I have a few questions / issues regarding this phone and android in general, here it goes:
Voice Talk: what are the differences between the two apps (the one with the green and the one with the blue background colors)? They seem to do the same things to me.
Energy saving: the energy saving implementation doesn't seem too "smart" to me. I'm cool with setting reduced energy configurations like lower brightness and turning off bluetooth etc when the battery treshold kicks in, but I'd expect it to restore my setup once the battery level goes above the treshold again. Atm I have to manually undo all the changes that the battery saving functionality does, basically once a day. Isn't there a "smarter" app that restores my settings before the energy saving mode kicks in?
The battery: I've streamed 30 min of music from the device to my car's bluetooth stereo, and it removed 26% of the battery charge. I'm on fw KE2 cause it seems that KE7 is even worse when it comes to power consumption. Still, isn't it too much?
Volume: I've turned it all the way up both with the side button and inside settings -> sounds (all 4 of them). Still, if someone in my office is talking I miss a sms reception etc. It never happened to me when I had the 5800 express music, so I'm not deaf
App notifications: I left my phone near my bed, there is at least 3 out of 4 bars of 3G signal, facebook is set on 30 min updates, accuweather on 3 hours, info-costs every hour, the phone never turned off nor lost the 3g coverage, yet it missed completely or partially a LOT of updates
App settings: app settings also seem a bit random. I have an app called noLed to show led notifications on the screen when it's locked. I had enabled it, checked the "start noled after phone reboot" and all, and even if the phone never even rebooted, after a day or two I went it and the first checkbox (activate NoLed) was misteriously turned off...
Thanks everyone,
TD
I'm particularly interested in a response to the energy saving that is stock on the sgs2.
However what i want to know is if the energy saving is active, or whether 'energy saving enabled' simply means it is ready to cut in when battery gets down to set target.
Any response to the above questions would be appreciated.
Ta in advance.
Sent from my GT-I9100 using XDA App
I don't think there's any difference between Voice command and Voice talk. Different interface is all I guess?
yamanote said:
I don't think there's any difference between Voice command and Voice talk. Different interface is all I guess?
Click to expand...
Click to collapse
Isn't it kinda silly to have two different interfaces for a program I'm not even really supposed to use via its interface, but via voice commands?....
samed1983 said:
I'm particularly interested in a response to the energy saving that is stock on the sgs2.
However what i want to know is if the energy saving is active, or whether 'energy saving enabled' simply means it is ready to cut in when battery gets down to set target.
Any response to the above questions would be appreciated.
Ta in advance.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
As far as I've understood, when it says 'energy saving enabled' in the notification panel it just means that the feature is turned on, but it doesn't necessarely mean that it's gone into 'energy saving mode' already.
My issue with it remains, I don't want it to disable account sync, bluetooth, turn down the brightness etc, and the day after, once the phone is recharged, I have to re-enable all of them...
tylerdurden83 said:
Isn't it kinda silly to have two different interfaces for a program I'm not even really supposed to use via its interface, but via voice commands?....
Click to expand...
Click to collapse
Got it figured out.
Voice command is for when you're sitting down or something and can give the phone your total attention, while Voice talk is for when you're driving or something.
In Voice talk you can enable 'driving mode', which reads out and incoming texts and numbers of the phone which is calling you.
Even with that disabled, you can just say 'Hi Galaxy' or 'Hey Galaxy' and it will start listening to your commands.
(useful while you're just driving and don't want to be distracted by having to hold down the home button (ahem iPhone) or tap the Tap to speak button)
Still a bit redundant (why not just have voice talk?) but at least there's a difference
I now see what you mean about sync being disabled after leaving power saving mode.
Had a scout about and can't find a solution to this.
Anyone have a solution because this is very annoying.
Sent from my GT-I9100 using XDA App
I'm a bit puzzled by the battery life. I mean, afterall they advertise the various components of the gs2 as battery saving (for example the actually turned off pixels of the super amoled, or the dual core).
So, by logic, if the more advanced parts of it are energy saving compared to other less advanced models, why isn't it consuming less battery?....
Any more info?
I have a new question, is it normal under KE2 that the wi fi can't catch the signals almost al all?
At university I couldn't even detect the network, while the guy next to me with an iphone4 had full signal strength. On the train I had 1 line and it kept disconnecting, while my mate with the nokia 5800 express had no issue with it.
Even at my house going from my desk where the router is to my bed right in front of it, it already starts to drop significantly.
Another issue that I've noticed is that sometimes even tho there is 3g coverage the apps won't refresh. For example, AccuWeather hasnt refreshed since the day before, or manually firing a refresh of the contacts in my WhatsApp list ends in a "update failed, try again later" message, but after rebooting the phone it magically works right away...
My goal is actually to save battery life and simplify my day-to-day. Many people rave over Tasker, but I have no interest in learning an app of that complexity when my needs are very simple. They are:
By time (usually with respect to my work schedule), turn on/off volume.
Turn off autosync at work as I use my desktop for that, but enable it when I get home (so my calendar and email is up to date).
Turn Bluetooth on when I get in the car to go to work.
Turn off stuff at night.
By location, override the above, if I'm not at work - ie: on a Friday, if I take the day off and am not at work, leave wifi on.
That's about it. I'm hoping it will help my battery life a bit. I've used Timeriffic in the past and it is really very good and doesn't seem to drain the battery. But it very much requires me to stick to my schedule very closely or it isn't effective - ie: BT on for car use, but if I'm running late, it it's useless.
I have Juice Defender Ultimate, but it's frustrating me as it turns data and wifi off and just doesn't seem very smart about turning them on, even though I've whitelisted apps to always have data on for. It's kinda driving me nuts. It also doesn't really do the rest of what I want, with respect to volume stuff. I will likely leave it running with wifi/data toggles turned off so it can't mess with that. I like that it will throttle the phone when it is locked, though I'm not certain Android doesn't already do that - (I'm on an LG Optimus 2x v10e and Android v2.2.2)
Other thoughts: I want a simple, set-and-forget app. If something comes up that I want to change, add a new rule/setting and leave it again. I just want it to work, but not at the expense of battery life. My needs are pretty basic, so I'm hoping battery life won't be that affected.
My thoughts on the competition so far is:
Setting Profiles - seems pretty good, decent reviews. UI doesn't seem as simple as Locale, so unless it's drastically better, I'm still leaning towards Locale.
PhoneWeaver - as above, but reviews aren't quite as good. UI still better and simpler on Locale.
Llama - free, but god the UI!! If this just made more sense, I'd likely go with it.
Locationbot - cheap, but the reviews don't seem that great.
Tasker - overkill for what I need, I suspect.
EasyProfile Pro - more money than the rest. UI is okay, not great. Gets good reviews. The popup widget thing looks decent.
Your thoughts/experience?
Thanks in advance...
Profile
https://market.android.com/details?id=com.noimjosh.profile&feature=search_result
is strictly time based and its only for manipulating notifications, wifi and bluetooth, screen brightness, and can auto replay to calls or sms.
Its very good at those though(can even seperate sms from email notifications which was my biggest need) and it has a widget that you can throw on your desktop to quickly manually switch between profiles you create.
However as I said it strictly for profiles, wifi and bluetooth so it won't handle sync scheduling.
Taking a closer look though it does have control over turning on and off airplane mode which might be what you are looking for.
I have a somewhat complex question, and I am hoping that someone knows a good approach or apps that I can use.
I have Android devices in multiple rooms around my house, primarily set up as clocks, all on the home wi-fi network, of course. I have a primary phone, a couple of retired phones with wi-fi only, a couple of tablets with wi-fi only. (My eventual goal is to have them all connected together for several purposes, including an intercom system; this current project is a stepping stone.)
I have reminder alarms that go off all day long. Due to physical problems, the ability to control an alarm remotely is very handy.
I used to have the reminder alarms on my chumby, and I could ssh into that and control the alarm. I could change the alarm time, snooze, turn alarms on or off, etc. I used to just ssh into the chumby, then leave that konsole open on a virtual desktop on the linux machine, and switch to it when I needed to access the chumby. I also had an android remote control for it, very spiffy.
Sometimes, though, I was in another room and I didn't hear it. Problematic.
Yes, my obvious solution is to put all the alarms on my phone and carry it with me all the time. Except if I were the sort of person who has a mind like a steel trap, I wouldn't _need_ the reminder alarms in the first place It doesn't help much if the phone alarm is going off and it's three rooms away. Either I won't hear it, or I'll have to get up to shut it off, and I might not be able to.
So here's what I'd like to do:
* For each alarm, ALL the android devices sound off.
* Snoozing or dismissing the alarm from one device snoozes or dismisses the entire alarm (they all stop making noise, and they all start again when the snooze is up).
* Snooze or dismiss the alarms from my linux box with the same effects as from the android devices.
* Have some way to direct the alarms to just my phone until further notice--when I am going to be out of the house, I'll still need those reminder alarms, and the poor dogs don't need to deal with alarms sounding for hours until I get home.
1) It seems like the easiest way to manage this would be to set up something like a streaming media server on the linux box, and have it play on each of the android devices at times set up in a crontab. I *think* it was possible to stream media through multiple chumbies at the same time, so surely it's possible to do it through multiple android devices? Yes?
But I don't know how to use one to snooze a program set off by a crontab. I also don't know how to divert all the alarms to my phone [for use when leaving the house] if the alarms are primarily controlled by a linux server at home. I don't think my wi-fi reaches that far.
2) It seems like the next-most easy way to do this would be some kind of script that remotely controls the various android devices, but I have no idea where to start. I do know that you can access the terminal on an android phone, you can write shell scripts, and that you can ssh into phones if you have the right apps. What I don't know is how to control the android alarms from the command line or how to synchronize media on multiple devices.
Again, I'd want to snooze/dismiss alarms from any of the android devices on the wi-fi network, or from my linux computer.
I'd want to be able to turn off all alarms except the primary phone occasionally. It'd be awesome if the other devices could automatically detect if the phone were on the network, and only sound if it were present.
3) Other options? Are there apps or programs or scripts or methods that I don't know about, that would make this easy-peasy? Am I fretting when there is already a solution?
Thank you.
Bump? Please? Anyone? Anything?
Well, I'm just throwing my thoughts out there. This definitely sounds like a difficult task.
I assume that you are not able to write your own android apps, neither am I. So we just can't build our own solution.
I don't have an idea that solves all your questions, but I have some ideas for some of them.
Regarding your need to change the behavior if you leave your perimeter:
There are apps that can trigger predetermined tasks based on your location (wifi, GPS, etc), so you could use that.
You definitely need some kind of Webserver, connecting your phone to the other devices when you're on UMTS.
There are apps like "Android lost" that enable you to remotely control your devices, for example triggering alarms, etc. Maybe you could put that into some use.
Regarding your idea with the streaming server:
Could you set up all the devices so they start playing as soon as the server starts streaming? Maybe let vlc constantly run listening to your server on all the devices. Or a Internet radio is probably better because it can run in the background playing "silence" the whole time.
Create a shortcut on all devices to send a command to the server to stop the streaming, those servers should be manageable through ssh.
Install a normal alarm on your phone. Combine this with the location based triggering, so it is only turned on while your outside your house. Have a shortcut on your phone to manage the server and the house alarms as well.
I think this might work and should be actually be possible to realize.
I know this is not well written at all and not really in a straight line, I just made it up on the fly.
I'll try to turn it into a Tl;dr
1. Set up Internet radio server on your home network.
2. Tune all house devices in to said server.
3. Play alarms over Internet radio
4. Use command shortcuts to turn off alarm
5. Use app to automatically toggle the alarm on your phone based on your location.
6.???
7.profit
Let me know what you think, especially if it was any help at all. I like projects like that!
Sent from my GT-I9300 using xda app-developers app
Okay, great, that is really helpful and gives me a place to start Thank you!
I do have Tasker, and I'm willing to buy other apps if they look like they'd help, but I think Tasker is probably going to be my biggest help with the location detection.
I do not have any idea how to tell Tasker "turn off alarms on [primary phone] phone if [home network] is detected, turn on X, Z, and Q alarms if [home network] is not detected." I've played around a bit with it and realized that getting Tasker to execute specific actions with other programs--in this case, Alarm Clock Xtreme--is really kind of obscure, if it's even possible. It must be possible, yeah?
--Wait, is there an alarm clock for the Alarm Control Freak that will *also* detect [home network]? I loooove the way I can use Alarm Clock Extreme: unlimited numbers of preprogrammed alarms, just toggle the ones I need; all kind of options with respect to what happens when the alarm goes off, choice of snooze duration, etc etc. If there's one like that that _also_ has the option to detect location, that would be awesomeness.
Or...hmmm...I suppose I could have it freeze Alarm Clock Xtreme if it's on [home network] but activate it if it's off. I really do have to get around to rooting the phone, I suppose.
...
Do you have any suggestions for what to use for streaming from the house server, and what apps to use for receiving the streaming? Oh, I see you mentioned VLC (for some reason my brain parsed that as VPN); I'll look into that.
I think if there's a decent app for listening to streaming (suggestion welcome!), and the server can stream to all the devices at once, I can probably figure out how to use just one device to ...mute the server? (With the app itself, or a shortcut, or a short ssh script maybe.) Since they all need to be listening 24/7, muting is the thing to do, right? If I turn off the server, that could make them disconnect or stop listening, right?
I still need a snooze mechanism, though. Among other things, sometimes I need to postpone whatever the reminder alarm is going off for; sometimes I need it to help me keep track of the passing of time after the alarm goes off. It's complicated. I need to be able to snooze.
...
Question: In this setup, how do we prevent the alarms from going off on all the devices when the primary phone has left the house? I can see how we get the alarms on the primary phone TO go off, but not how we turn off the streaming alarms. I mean, I don't know how to tell the server to stop serving if it can't detect [primary phone]; is that possible?
It's not that I object to music playing when I'm not home. It's that if the dogs wake up while I'm gone, they'll need to pee. I'd really, really like not to have to clean that up every time I leave
Hm. A kind of bulky and inefficient way to do it could be turning off the streaming on the devices. Perhaps have them turn off the streaming app when the phone leaves the network, and then start it up again when they detect it again.
This is slightly problematic, because my house has very, very, VERY bad reception inside. We have to have a repeater (effectively a second network) for The Spouse's computer, which is FIFTEEN FEET from the wi-fi router. With no walls between. Really, really terrible reception. My phone drops off the wifi network, and immediately reconnects, dozens of times in a day. So does my laptop.
Soooooo I probably need a better metric than "is [primary phone] visible on wifi? No? TURN IT ALL OFF!" Maybe this is better: "Has [primary phone] been off the network for 15 minutes? Okay! TURN IT ALL OFF!" But reconnecting would still be a bit of a pain, unless the other devices only check for re-connections when the streaming app is already off. Hmmmm. I suppose they could check, say, 20 minutes before an alarm is due to go off, then 5 minutes before, and otherwise not check at all.
Except that, drat, it's the server that knows the alarm times, not the devices. They're _mostly_ on the hour, but not always. And what if I forget and it's partway through a "snooze" when I'm heading out the door? They should definitely shut off rather than continue once the snooze duration is up.
...
Nuts, it looks like this is not going to be the jumping-off point for a whole-house intercom system the way I hoped it would be. Not if everything is strung though the server, which is only working with streaming media. I could really, really use that intercom system. I just want to be able to touch a shortcut on one device and have all the rest of them repeat whatever that device hears. Then tap it again [to stop broadcasting] and let someone else respond, if they want to, from another device, the same way.
This will eventually need to reach to an outbuilding, with either a cat6 line run to it or a wireless repeater, so bluetooth won't do. I'm wondering if Skype set up to call all the other devices in the house would do it, but I want push to talk, not push to dial. (Not to mention the pain in the neck of giving each wi-fi only device a whole voip setup.)
(The various intercom apps I've tried don't work very well. The first time one of the devices leaves the home network, they never seem to reconnect and accept transmissions again. Even the apps that are _supposed_ to work if they have ANY kind of reception, including mobile data or other wifi networks.)
...
You've given me a lot to think about, thank you. But I know I am not there yet. I am wide open to further suggestions, for mechanisms, for apps, for anything!
Just a quick reply to signal you that I'm still there
I, hopefully, will come back later with a more detailed answer.
Regarding your WiFi connection problems, are you living in an area with a lot of different wireless networks present? Because this sounds to me like the channel your WiFi router is set to is already overcrowded. At such a close distance, as you described, there should be excellent reception. Unless other signals interfere, causing your mentioned frequent disconnects.
Solution: Download the free app "WiFi Analyzer" from the market and run it to see if other networks are causing interferences.
Regards, Ichwillquark
ichwillquark said:
Regarding your WiFi connection problems, are you living in an area with a lot of different wireless networks present?
Click to expand...
Click to collapse
Ah, no, actually. Quite the opposite. We're way out and surrounded by non-technically-minded people. We're the only wireless network anywhere near here, according to, for example, OpenSignalMaps and The Spouse's various wardriving type apps. Hm, pretty sure he uses Wifi Analyzer too, actually.
It's the freaking HOUSE. We can't get _any_ reception inside; not wifi, not cell, not radio, not TV. Go three steps outside the house and we have crystal-clear cell and radio reception. We've _tried_ to change "channels" on the wifi router, change routers, change DSL modem, all kinds of things; nothing works. It's the freaking house.
Being so remote is part of the problem. I have reminder alarms that go off all day; if I leave, I am gone ALL day. The poor dogs!
...
Thanks for bouncing the signal and letting me know you still exist I do too. Would love to hear anything else you have to suggest. [Hey! I think I finally hit the minimum post limit necessary for being able to click "thanks!" Spiffy!]
I don't know how helpful to you this could be, but Timely, a recently created alarm clock app has alarm syncing. I don't know to which extent (snooze sync?) but it might be worth inquiring to the creator(s).
There's a trial function too from what I can remember, but after that you will need to purchase whichever functions you'd like to keep.
https://play.google.com/store/apps/details?id=ch.bitspin.timely
If this suits you, I imagine it would be more convenient than a convoluted Tasker task.
polobunny said:
Timely, a recently created alarm clock app has alarm syncing.
Click to expand...
Click to collapse
"Manage, dismiss and snooze alarms on all your devices at once"
Oooooooh, that sounds WONderful!
That does sound a lot easier than running a media stream from a server, and working out scripts to snooze or dismiss.
I don't _see_ any mention of anything except a ringtone for the alarm sound, either on Play or on their website. I'll try it out and see.
...
The Tasker [or some other location detection] looks like it's still going to be necessary, though, and I still don't know how to do it. I need to disable the alarms on ALL the other devices when I--and the primary phone--leave the house. But the alarms on the primary phone still need to go off.
So I do still need some way for [something] to detect the phone, and to disable the alarms on [everything else] when it leaves the house.
...
Oh, POOP. Timely is not *compatible* with some of the devices.
Those are rooted Sensations with ancient versions of Android. If I put updated ROMs on them, will they be able to handle more recent apps? I mean, they can't even get Google Play, currently, they're still using Market. We didn't want to mess with them, because re-setting up a phone is annoying enough once, and we _thought_ they had all the apps they were going to need.
elfchick said:
Oh, POOP. Timely is not *compatible* with some of the devices.
Click to expand...
Click to collapse
I might be wrong, but this might be just because the resolution of some of your devices is not supported. Which doesn't necessarily mean that the app won't work just fine, it's just the market trying to safe you from an inconvenient user experience. A possible workaround would be to download the app on a supported device, extract the apk, and then install them on the unsupported ones.
Other workaround would be to get an app that spoofs the information that is send to the market about your device's resolution. I just read about this possibility today. The xposed framework has an applet that does that.
Interesting about the possibilities of getting an app installed without the Market's "approval"; I'll try that if Timely responds to the questions I sent them. And hey, if it's just that I have a really old ROM on there...well, it might be worth updating the version of Android on those phones anyway.
...
I just read about NFC tags, and I wonder if I could use them for this. Apparently you can buy NFC tags and program your phone to recognize them. So you can, for example, save battery by tapping the phone to a pre-programmed NFC tag on your door as you are leaving, and the phone will turn off wi-fi.
Perhaaaaaaaps I could use this in some way to turn off alarms in the house as I am leaving. Tap the NFC tag, a script disables the alarms on everything but [primary phone]. Tap it again when I get home, re-enable the alarms. That way nothing has to be constantly checking for the presence of [primary phone]. I can be scatterbrained, but if I put it by my keys I *should* manage to see it and remember to tap it, and tap it again when I get home and put my keys away.
Very intriguing. This seems like it _might_ be something I can script. As soon as I figure out just what I need to do to disable and re-enable alarms automatically.
Don't forget it's necessary for your phone to be NFC enabled. So definitely the Sensation cannot use the NFC directly, don't know which phone is your primary so that's to consider.
polobunny said:
Don't forget it's necessary for your phone to be NFC enabled. So definitely the Sensation cannot use the NFC directly.
Click to expand...
Click to collapse
Yeah, thanks The Sensations were retired this year when we replaced them with HTC Ones, so not a problem. I thought it'd be more clear, though, throughout the thread, if I use phrasing with descriptors like [primary phone] instead of expecting people to rmemeber which of my devices is which. (I found this thread hilarious; I could almost have been the one who wrote it: http://forum.xda-developers.com/showthread.php?t=2486180 ...very helpful.)
I'm thinking touch the NFC tag on the way out and the way in, and [...profit?] the HTC One somehow sends signals to the other devices to disable/re-enable their alarms. Don't know how to do this yet, but it seems like a MUCH better idea than having all the other devices constantly scanning the network to make sure they can find [primary phone]. Especially since they might be trying to find it while it's temporarily disconnected.
Hey elfchick, just following up as you mentioned that syncing multiple devices for an Alarm clock app was just a first step and I was wondering if you had taken this concept any further?
I've got several unusual ideas about setting up tablets as Home Automation devices and wondered if you had taken this idea any further.
Thanks, Earl
Hi,
as soon as I bought this phone I am struggling with making the GPS receiver working properly in app such as Starava and Endomondo. Mate constantly drops the signal for couple of seconds. I tried different solutions such as:
apps->ignore battery optimization
manage the apps (running in the background) manually
Strava works without autopause
last used apps -> padlock is set to locked
Below you will see a compare of a proper signal (red) and Mate's (blue) with a lot of losses.
Please help as it is very annoying 'feature'.
Nobody?
Huawei Mate 10 GPS performance is poor
Cameyo said:
Nobody?
Click to expand...
Click to collapse
I have exactly the same experience. My (new) Mate 10 Pro has far worse GPS accuracy than my (previous) Galaxy S7 Edge.
Tried many possible solutions, nothing helps. Shame on you, Huawei!! :crying:
I don't use these apps but I remember the same complaints about Mate 9. A joke that it hasn't been sorted out yet!
Mate 10 lite garbage gps
Same issues with endomondo amd my huawei mate 10 lite.... Gps loosing signal when running in the park, but no issues with gps driving applications... Instead of 3.14 km it shows me only 2 km, it is loosing signal every 5 mins.
Same thing here, bought mate 10 pro (bla-l29) 3 weeks ago and besides its great camera and other stuff, this problem with gps and strava is so annoying.
Here are two pics, first from a bike ride, with numerous spikes, and other, walking, where red line is gps track from the mate and cyan is actual track that I was walking.
I have sent a question today to the official croatian huawei forum, but I don't expect some remedy. Maybe a new Android Pie and EMUI 9,which is scheduled to arrive in my country on 14 December fixes that issue, otherwise I'm thinking on selling the thing, because I'm quite often on my bike and trekking in nature.
Edit: Since I'm a new member, can't post external links to pics, sorry.
My mate 10 works great with GPS.. In the car or walking. Even in the train..
Is GPS dropping only while the screen is off (or app in background)? If rooted, the solution is to disable the Power Genius app using either Titanium Backup or Service Disabler (and then reboot). If not rooted, you can try via ADB but I'm not sure it will work.
"Ignore Battery Optimization" affects Android's built-in battery optimization. Power Genius is responsible for Huawei's built-in battery optimization features - which don't increase your battery life but do cause issues with GPS, music playback, screen brightness, etc.
thref23 said:
Is GPS dropping only while the screen is off (or app in background)? If rooted, the solution is to disable the Power Genius app using either Titanium Backup or Service Disabler (and then reboot). If not rooted, you can try via ADB but I'm not sure it will work.
"Ignore Battery Optimization" affects Android's built-in battery optimization. Power Genius is responsible for Huawei's built-in battery optimization features - which don't increase your battery life but do cause issues with GPS, music playback, screen brightness, etc.
Click to expand...
Click to collapse
There are two things which can be done, one is to manage apps manually (via battery settings) and other with that "Ignore Battery Optimization".
So you are saying both are standard android features, nothing to do with Power Genius service?
Yesterday I've allowed "Ignore Battery Optimization" for Strava, restarted the phone (as suggested on many places after this), and went for a short test ride. It seems that there are definitely less spikes than before, but still there were two of them on a 5km trip. And the GPS accuracy is still not satisfying. The screen was locked, as was always on my previous Samsung A5 and all iPhones before that.
I've tried disabling the lock screen few days before, but during walking. Half trip the screen was on, half off. I didn't notice any difference. During walking there were no spikes, but the accuracy was very bad, the track had two very strange off-paths in order of 40-50 meters.
Static accuracy of GPS is always ok, in several apps. But dinamic gps tracking is bad.
I'll try Endomondo, other app for the same purpose and post results here.
"Ignore Battery Optimization" is an Android feature.
"Launch" (manage apps manually) is an EMUI feature.
"Power Genius" is a separate EMUI feature. Amongst other things, it uses an algorithm to determine what apps and processes should be killed off when they are in the background. But it is artificial intelligence that is not intelligent - when you are streaming music, it kills processes necessary for bluetooth music playback. If you use an app like Google Maps, it gets killed off like clockwork after so many minutes in the background.
There are sometimes ways to manipulate it, i.e. I think it looks at how long a process has been running, how many apps are running in the background, whether the phone is being charged. But generally, there is no downside to disabling it if you are rooted.
I am relatively new to Huawei, Power Genius is the main reason I would never be inclined to recommend a Huawei device to a lay person who did not intend to root it, or what not.
Oh, bummer.
Well, I'll test some more, with Strava and Endomondo, and if nothing improves, I'll see whether to consider rooting, or that ADB thing, or replacing it for Samsung S8.
I don't have experience with rooting, but I jailbreaked every iPhone I had, my occupation is software developer, recently changed the firm and now beginning to develop under Android studio, so i think I could do that. But I'm afraid it could be pure GPS problem, either hardware or software, I'm not sure.
If I leave the screen on during the ride, and problems persist, can we exclude Power Genius and blame GPS receiver or code responsible for it?
The phone has a problem with the GPS, thats for sure. Even after the Pie update, nothing changed. I personally had no issues with killing apps, but overall GPS accuracy is very poor. For example, Im walking down the road on a left sidewalk, google maps says Im on the right side of the road. Thats about 10 meters away ! And in a open space with no obsticles. Definitely a HW issue
Hi, I'm having an issue with battery drain during phone call. The battery meter consistently shows audio phone calls as "screen on" and drains battery exactly as if the screen was on, even though the screen is off during the call, with a headset being used. Same issue regardless of LTE or wifi-calling. Audio calls on whatsapp and google hangouts (again with screen off throughout) always shows as 50% screen on/50% background.
Is this normal for iphone? Very frustrating as I am used to making long phone calls on android with very little battery drain!
Obviously it's being misreported which can happen but it's suspicious.
Possibly could be malware... iPhones aren't malware proof. Social apps elevate the risk level.
WhatsApp is malware or close enough... I won't let it FB or any social media apps run on my devices. If I can't completely access it by browser alone, I don't go there.
I would take out the trash and go from there.
Use the native phone app instead.
Thank you so much for the information; this website contains a lot of other fascinating stuff as well.
Keep sharing posts that are as informative as this one. aim provider portal