Hello!
I have a Samsung XCover 2 (GT-S7710) and I've tried to flash a CM-Rom for quite a while, but without success. At some point my phone stopped to boot a single rom I installed. It automatically starts into CWM Recovery, even with my backup (made with cwm). I thought cwm could be the bad guy and I flashed the Stock Rom with Odin, but same problem here. In Odin everything is fine but again it starts in recovery automatically.
I've read that the bootloader could be the problem and you need to flash it with Odin, but I don't know which one to take, since all treads were about other phones.
Does anyone know which bootloader I have to take or if there is another solution?
Greetings!
Related
Hi, I have the following issue with my Samsung Galaxy Ace 2...
I flashed a CM10.2 ROM and it worked fine, but later I decided to return to stock ROM. I performed factory reset and all data wipes, and flashed the rom via Odin.
Then my phone became bricked, no restarting, just freezes on the Samsung booting screen. I can't go into recovery mode, and I can't flash any recovery I tried because Odin gives me NAND Write Start Fail.
The strangest thing is I can flash any ROM without a problem, but it doesn't seem to make a difference.
Please help me, I need that phone working because I use it pretty often and have no one else to turn to.
Hello dear community
This is my very first thread I am making on this website, so please pardon me if I am on the wrong page of this website.
Anyways, I'm more or less desperate. I saw a youtube tutorial on how to install Android 4.4 Kit Kat on a Samsung Galaxy Note N7000 and I heard I'd need root AND a custom recovery.
Because I'm a total newbie to this kind of stuff, I tried the very first thing I saw that had something to do with custom recovery, because I already had my phone rooted. So, I looked up a tutorial on youtube on how to install CWM custom recovery and ended up with installing it successfully, but now my phone is stuck in a bootloop. As I already mentioned, I am a newbie and therefore I am very desperate at the moment, you know.
The only thing I can do is go to Recovery Mode, but if I try to turn the phone on it gets stuck in a bootloop (It actually doesn't loop at all, it just freezes at the moment when the Samsung Galaxy Note logo appears and doesnt do anything after that.).
I think my problem is that I actually threw a new Kernel on my phone, because the video title says "How to install Kernel with CWM [...]"
I would be very very very very very grateful if anyone was kind enough to help me get out of this!
I really need help!
Thanks!
PS.
If this helps you help me:
This happened when I had Android 4.1.2 installed.
There's going to be 2 ways to get out of this:
1) Reinstall the stock firmware via Odin.
2) Install a custom rom via recovery.
Personally, I'd go with number 2 because a) you wanted to update anyway and b) if you have the right recovery and rom, it'll be easier as you can just put the files you need on an external SD card and install via the custom recovery. Now, not all recoveries are able to flash any file. Many times you need specific ones to install the newer android versions. So, if you are wanting to install something 4.4 based, then using a recovery that was made, say, last year, probably will not work well if at all.
Another thing to try first, is to wipe the cache and dalvik cache in recovery since you said you tried to install a kernel. It is always recommended to wipe these when installing (assuming you did pick a compatible kernel with what you were trying to install).
Hello
I recently recieved my sisters old galaxy s2 after it had been water damaged and the only problem was the power button not functioning.
I wanted to flash a stock 4.1.2 rom via odin and since this was my first time flashing an S2 I followed a tutorial showing me how to flash a stock rom.
Everything went well during the flash but after it completed it bootlooped forever and ever. I tried flashing the same ROM again and the same bootloop. I also tried other ROMs and nothing worked. People have fixed their odin bootloops by entering recovery and wiping everything but I just don't know how to enter recovery without a power button.
Any suggestions?
Hi everyone
My sister updated her MEGA OTA last month. She cant remember which version she was on. I am assuming it was 4.3. shes doesnt know much,
Her phone got stuck in bootloop.
Initially a got a hard time even getting into restore mode. however after a lot of goggling and trials and errors here is where i am today :
1- I can install TWRP and/or Philz recovery and boot into them.
2- I can enter download mode
3- I have tried installing many ROMS and different versions. I was only partially successful with 4.4 versions because I get a passed message in Odin however upon restart the phone enters boot loop again.
4- I have tried multiple wipe data/dalvik cache/cache and restoring factory settings but i still get the same results.
5- Only in Philz recovery i can mount the external SD card and copy zip files. I was able to root the phone that was (but im not sure if it still is). However all ROMs zip files I tried to install (both from PC and from extSD card) wouldnt open in recovery mode.
Because I get a passed message when I install a ROM from Odin , I dont know what the issue could be. But there is something wrong that happens as soon as this phone boots up.
I seriously do not know what to do anymore. I just need this phone to be working again. At this point I dont care about warranties/ROM versions/stock or custom...
Please help and sorry for my bad English
It sounds like you need to download the stock rom and flash it in Odin (you gotta put the phone in download mode to flash in Odin). The stock rom can be found on the sammobile website in the firmware section. That should get you back to square one (stock rom, stock recovery, no root). Then you start over from scratch.
Sent from my SGH-M819N using XDA Free mobile app
Thanks
I did and I still get the same problem.
In fact after installing stock rom, i could not enter "stock" so I installed philz recovery, logged in philz and wiped cache a couple of time, did a factory reset.
and yet when i restart , the phone is stuck in bootloop.
Maybe she has a Galaxy Mega with a repaired screen. Starting with 4.4 Samsung only supports a digitizer with Synaptics brand chip. It's a big mess and there are countless screens and digitizers made worthless. I think unofficial 4.4 by Cyanogen and others might work, but not official Samsung. With some Galaxy Megas you get a bootloop. With others it boots however the digitizer and touch functions no longer work. I don't know how to go back after you are on official 4.4 because last I saw, there was no root for it. If I'm wrong, someone else please clarify and continue to help.
IMHO only one way out from such situation is try to flash MegaFire MJ2 which is derived from stock 4.2. It's only one 4.2 ROM which can be safely flashed onto KK.
Iformation about MegaFire you can find HERE
Hello. I have a Galaxy Mini 2 (GT-5600d) more specific, and I installed a custom OS which the phone couldn't support well, so I wanted to turn back to my stock ROM. I found the ROM and installed it using ODIN 3.09 and the only problem I have is that I have to do a data wipe from the recovery menu. Problem is, the recovery menu is jammed for some time now. I didn't need it much before and never taught it could screw up. Seems that now I am stuck with the phone in a continuous boot loop. Any suggestions?