Related
Can someone help please i think ive bricked my sero 7 pro...i followed http://forum.xda-developers.com/show....php?t=2297246 post 2 to the t it seemed to root fine then i booted into recovery and it just said recovery and i couldnt get any further then it restarted and now its tsuck on the hisense logo for 45mins wont do anything if i hold volume up and power it says fastboot and nothing else if down and power it says recovery and nothing else tried the recovery mentioned in the other page nothing just stays on hisense logo
Me too?
jjsero7 said:
Can someone help please i think ive bricked my sero 7 pro...i followed http://forum.xda-developers.com/show....php?t=2297246 post 2 to the t it seemed to root fine then i booted into recovery and it just said recovery and i couldnt get any further then it restarted and now its tsuck on the hisense logo for 45mins wont do anything if i hold volume up and power it says fastboot and nothing else if down and power it says recovery and nothing else tried the recovery mentioned in the other page nothing just stays on hisense logo
Click to expand...
Click to collapse
I bought mine last week (UK version M470BSE not A) this is the 32GB version... Basically I managed to root it just fine but noticed that I couldn't get into CWM recovery? Would just stay on the 'Recovery' title screen. So after much reading on the thread I noticed that someone had the same problem and their solution was to put the tablet into 'Fastboot' mode and run the 'XERecovery.exe' but now my tablet is bricked I can tell you I'm not happy at all as I'll most probably have to destroy it in order to return it for a refund.
What was the outcome of your problem, did xboxexpert reply with an answer? Or did he just give you the following steps:
"First off, no I did not. It is definitely not bricked you can not brick this tablet thanks to my scripts.
Step 1: Remove all USB Cables and Hold Volume up and Power from a off state, you will see FASTBOOT on the tablet screen. Let go of power once you see FASTBOOT!
Step 2: Provided you have a USB cable and a PC you can plug it in now and run the recovery.exe from within the folder where my root script is located.
Step 3: By the time you read this if you followed the instructions XERecovery.exe told you to do you should have access to CWM Recovery go install a ROM."
If so that's bullsh*t! As without proper tools such as 'odin' like whats used for samsung flash recovery, we are SCREWED!!! I don't think Hisense are supporting this device like their competitors do in terms of technical resources etc.. Please let me know either way!
Cheers
itfreek said:
I bought mine last week (UK version M470BSE not A) this is the 32GB version... Basically I managed to root it just fine but noticed that I couldn't get into CWM recovery? Would just stay on the 'Recovery' title screen. So after much reading on the thread I noticed that someone had the same problem and their solution was to put the tablet into 'Fastboot' mode and run the 'XERecovery.exe' but now my tablet is bricked I can tell you I'm not happy at all as I'll most probably have to destroy it in order to return it for a refund.
What was the outcome of your problem, did xboxexpert reply with an answer? Or did he just give you the following steps:
"First off, no I did not. It is definitely not bricked you can not brick this tablet thanks to my scripts.
Step 1: Remove all USB Cables and Hold Volume up and Power from a off state, you will see FASTBOOT on the tablet screen. Let go of power once you see FASTBOOT!
Step 2: Provided you have a USB cable and a PC you can plug it in now and run the recovery.exe from within the folder where my root script is located.
Step 3: By the time you read this if you followed the instructions XERecovery.exe told you to do you should have access to CWM Recovery go install a ROM."
If so that's bullsh*t! As without proper tools such as 'odin' like whats used for samsung flash recovery, we are SCREWED!!! I don't think Hisense are supporting this device like their competitors do in terms of technical resources etc.. Please let me know either way!
Cheers
Click to expand...
Click to collapse
I just got my UK one aswell (32GB) and went through the same path, no CWN and recovery has screwed it for me too, any ideas. Its not even 2 hours old
Got fastboot access, does anyone have a UK sero image I can try or any other advise on how to recover my device ??? Anyone ????
Sorted
Just to let you know, that I got my UK 32GB unbricked.
Had to purchase another one (extreme I know !!!), got xboxexpert to dial in, grab an image of the new one and then fastboot into the bricked one and reflash it
All working now. Head over to his thread for the image files
Well pleased !!!!
Hisense Sero 7 Pro
Alpinestar777 said:
Just to let you know, that I got my UK 32GB unbricked.
Had to purchase another one (extreme I know !!!), got xboxexpert to dial in, grab an image of the new one and then fastboot into the bricked one and reflash it
All working now. Head over to his thread for the image files
Well pleased !!!!
Click to expand...
Click to collapse
Hi there,
My Sero 7 Pro is also having this same issue. But also in addition to this, it will not charge properly.
It hangs on the Hisense screen for a long time whilst connected via usb.
When I try to restart into update mode (up+down+power) it just states battery is too low.
I cannot get into fastboot neither as battery is too low?!
I was able to get into recovery before but since the battery has died, i cannot recharge it and do anything?!
Any ideas would be much appreciated!
It will charge
megabite said:
Hi there,
My Sero 7 Pro is also having this same issue. But also in addition to this, it will not charge properly.
It hangs on the Hisense screen for a long time whilst connected via usb.
When I try to restart into update mode (up+down+power) it just states battery is too low.
I cannot get into fastboot neither as battery is too low?!
I was able to get into recovery before but since the battery has died, i cannot recharge it and do anything?!
Any ideas would be much appreciated!
Click to expand...
Click to collapse
Megabite
I had exactly the samething. Plugged into mains for the entire day did not give me enough charge for fastboot !!!! Was abit of a nightmare but plug it into your pc as the charge is slower and leave there for a 30mins + Try to switch it off (hold power button) when it starts to charge. Did that as the mains was just not holding its charge.
It will charge you just need to keep it off. You just need a little bit of juice to get into recovery (fastboot) and then it will charge.
Alpinestar777 said:
Megabite
I had exactly the samething. Plugged into mains for the entire day did not give me enough charge for fastboot !!!! Was abit of a nightmare but plug it into your pc as the charge is slower and leave there for a 30mins + Try to switch it off (hold power button) when it starts to charge. Did that as the mains was just not holding its charge.
It will charge you just need to keep it off. You just need a little bit of juice to get into recovery (fastboot) and then it will charge.
Click to expand...
Click to collapse
Thanks! I will try this.
You wouldnt happen to have an image I can then reflash it with as my recovery was actually worked until the battery died.
Thanks again
---------- Post added at 11:21 PM ---------- Previous post was at 10:25 PM ----------
Alpinestar777 said:
Megabite
I had exactly the samething. Plugged into mains for the entire day did not give me enough charge for fastboot !!!! Was abit of a nightmare but plug it into your pc as the charge is slower and leave there for a 30mins + Try to switch it off (hold power button) when it starts to charge. Did that as the mains was just not holding its charge.
It will charge you just need to keep it off. You just need a little bit of juice to get into recovery (fastboot) and then it will charge.
Click to expand...
Click to collapse
Thanks for the advice, that worked!
Ok so I can fastboot and get into recovery now.
Only problem is that because I flashed a US rom without a backup of my previous UK 32gb rom and I am a bit stuck.
Could anybody help at all with a backup image or any other advice.
Thanks
megabite said:
Thanks! I will try this.
You wouldnt happen to have an image I can then reflash it with as my recovery was actually worked until the battery died.
Thanks again
---------- Post added at 11:21 PM ---------- Previous post was at 10:25 PM ----------
Thanks for the advice, that worked!
Ok so I can fastboot and get into recovery now.
Only problem is that because I flashed a US rom without a backup of my previous UK 32gb rom and I am a bit stuck.
Could anybody help at all with a backup image or any other advice.
Thanks
Click to expand...
Click to collapse
Its all in this link
http://forum.xda-developers.com/showthread.php?t=2297246
Alpinestar777 said:
Its all in this link
http://forum.xda-developers.com/showthread.php?t=2297246
Click to expand...
Click to collapse
I've also wiped the system etc so need a UK rom. There are only boot and kernel on the first post.
Thanks for your help though
Sent from my GT-I9300 using Tapatalk 2
uk rom
megabite said:
I've also wiped the system etc so need a UK rom. There are only boot and kernel on the first post.
Thanks for your help though
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Hi,
there is a UK rom on this page:
http://forum.xda-developers.com/showpost.php?p=41875861&postcount=2
Martin
Alpinestar777 said:
Just to let you know, that I got my UK 32GB unbricked.
Had to purchase another one (extreme I know !!!), got xboxexpert to dial in, grab an image of the new one and then fastboot into the bricked one and reflash it
All working now. Head over to his thread for the image files
Well pleased !!!!
Click to expand...
Click to collapse
Hi I got my Sero 7 pro bricked. I have CWM running. I can go to the recovery and able to install any ROM I want, however my tablet shows Hisense and then gets stuck for ever. I am not sure what I can do.
Also Windows can recoganize the device as MTP USB Device, with a yellow sign. The updating of driver doesn't seem to work. So I cannot see my device when I type "adb devices".
Thanks for all the help.
It's not meant to charge via USB. Plug it into an ac adaptor.
Sent from my M470BSA using xda app-developers app
My tablet is charged but is stuck after it displays Hisense Smart. It keeps on displaying forever. I tried other ROM also, but same results. Any ideas what I can do.
Thanks.
i am facing same problem now
megabite said:
Hi there,
My Sero 7 Pro is also having this same issue. But also in addition to this, it will not charge properly.
It hangs on the Hisense screen for a long time whilst connected via usb.
When I try to restart into update mode (up+down+power) it just states battery is too low.
I cannot get into fastboot neither as battery is too low?!
I was able to get into recovery before but since the battery has died, i cannot recharge it and do anything?!
Any ideas would be much appreciated!
Click to expand...
Click to collapse
when i try to on my hisense sero pro7 after 5/ hour charging it also shows red signal.
dogood1 said:
Hi I got my Sero 7 pro bricked. I have CWM running. I can go to the recovery and able to install any ROM I want, however my tablet shows Hisense and then gets stuck for ever. I am not sure what I can do.
Also Windows can recoganize the device as MTP USB Device, with a yellow sign. The updating of driver doesn't seem to work. So I cannot see my device when I type "adb devices".
Thanks for all the help.
Click to expand...
Click to collapse
whether did you find a solution?
I'm desperate and I have the same problem: (
people help us: (
darmonus said:
whether did you find a solution?
I'm desperate and I have the same problem: (
people help us: (
Click to expand...
Click to collapse
Are you using windows XP. Try these links for help.
http://forum.xda-developers.com/showthread.php?t=2130399
also make sure you have this driver installed.
Microsoft_User-Mode_Driver_Framework_Install-v1.0-WinXP
dogood1 said:
Are you using windows XP. Try these links for help.
http://forum.xda-developers.com/showthread.php?t=2130399
also make sure you have this driver installed.
Microsoft_User-Mode_Driver_Framework_Install-v1.0-WinXP
Click to expand...
Click to collapse
I use windows 7 but I do not know how I can Install oryginal rom .
My tablet is bricked . I can use just FASTBOOT.
darmonus said:
I use windows 7 but I do not know how I can Install oryginal rom .
My tablet is bricked . I can use just FASTBOOT.
Click to expand...
Click to collapse
You should be able to install the original rom via fastboot.
I'm assuming that you are at the point where "fastboot devices" shows devices...
You can start off by installing the stock recovery: http://forum.xda-developers.com/attachment.php?attachmentid=2000996&d=1369834980
fastboot flash --RECOVERY stock_boot.img --no-reboot
Then you can grab the stock ROM from the second post in xboxexpert's thread:
http://forum.xda-developers.com/showthread.php?t=2297246
fastboot flash zip [whateverStockRomyougrabbed.zip]
Reboot into recovery and do a factory reset.
I hope that helps. It certainly can't break things worse.
just bricked my tablet. its starting in recovery and thats it
Hello,
I have recently made a horrible mistake, I flashed the incorrect ROM on my Xperia Z3v leaving the phone bricked. I am asking for your help. I have tried using the Flashtool but I am not certain if it's the phone or I that is causing a mistake. The steps thus far that I have followed.
Downloaded: Flashtool & Drivers
Installed: Drivers for Xperia Z3v
Downloaded: Firmware from XperiFirm
Now, the issue next is nothing shows up in my firmware when I attempt to flash. I have checked the source folder the .ftf files are there.
Furthermore:
When I hold VOL UP and plug in the USB>Blue led is indicated
When I hold VOL DOWN and plug in USB>Red flashes with a second of green whilst vibrating
Found this video on youtube: https://www.youtube.com/watch?v=dtaUxuorVSA
Exactly like this, checked for a solution seems like he repaired it via sony. Unfortunately for me I don't have that luxury.
**Update**
I installed the lastest release of flashtool (0.9.22.2) but it occurred to me to revert back to the previous release (0.9.18.6)
Now I can finally see the firmware but I am still having issues actually flashing the file. I get errors such as:
ERROR - root : this bundle is not valid
ERROR - Cannot delete C:\Users\Juan\.flashTool\firmwares\prepared\userdata.sin
**More Information**
I should include I am on a locked bootloader
same
that seem the same with my situation
Okay the green light is flash mode / upgrade mode. The blue light is fast boot. You want it on with the green light on to flash it once it's bricked. You can't flash it using fast boot mode because the boot loader isn't unlocked.
Now what you have to do is get it with the green light on and then the drivers installed.
Can't delete the file means that it had error while trying to flash and all that you have to do is restart the app and that goes away.
Now for the next problem is that I had this one and what I did to fix it is that I had to reinstall the drivers because those weren't correct and I did reinstalled it and it all worked good. Thanks.
Download the correct firmware for your phone (model and Country).
Use flashtool to install it on your phone
Works with a locked bootloader, no need for USB debugging.
The first error might be you ended up downloading the incorrect or incomplete firmware
I had the exact problem that you are having. I ended re downloading the flashtool a few times from various computers and then i got it to work. I figured when i downloaded it the first time i had a version that was to old/new. Or a bad connectiin when i downloaded it first time. After i downloaded flashtool again itthwn worked without issue just as it should. Whatever the provlem was for me was having to do with the download or version i downloaded wouldnt work completely. I think my internet connection when i downloaded it wasnt very good and maybe didnt download it right.
I made the same mistake too, trying to flash a z3 zip file. Then I got to run around my home city to find help. Then there's a guy. He had to open the back cover and connect directly to the circuit board in order to do something about the eMMC and SEtool or... something, I'm not sure. The phone is alive again! (costed quite a lot for a student, but... yay?). Funny though, he said the circuit board is similar to a z2 and not a z3. Maybe you could find someone who knows about these kinds of thing. Hope that help.
Girouette said:
I made the same mistake too, trying to flash a z3 zip file. Then I got to run around my home city to find help. Then there's a guy. He had to open the back cover and connect directly to the circuit board in order to do something about the eMMC and SEtool or... something, I'm not sure. The phone is alive again! (costed quite a lot for a student, but... yay?). Funny though, he said the circuit board is similar to a z2 and not a z3. Maybe you could find someone who knows about these kinds of thing. Hope that help.
Click to expand...
Click to collapse
That's strange were you on a locked bootloader?
Currently attempting to fix it once more, will update if I find anything out.
DireSpook said:
That's strange were you on a locked bootloader?
Currently attempting to fix it once more, will update if I find anything out.
Click to expand...
Click to collapse
Yeah, I think? I mean, it's right out of the box. Also, I think it's worth mentioning that the guy had to use SEtool twice to get mobile signal.
Did you fix the problem? I have the same problem now.
With a Z3v. D6708. I have a problem, got a wrong ROM, the flashee and now not start the phone in any way. The only way to start is "System Recovery" volume + power, which has 4 options: 1. "Continue Power UP", 2. "Safe mode", 3. "Factory Reset" and 4. "Power Down". The thing is try from flashtool but when I give "volume down" and connect the computer does not recognize. When light it even reaches the boot animation. When I give power with USB cable is connected in a loop is vibrating and shows red, blue and green.
I have exactly the same problem of the youtube video.
As it could fix the problem?
Some help ?
Thank you !
Pd. The device only have FastBoot.
did u solve this?
DireSpook said:
Hello,
I have recently made a horrible mistake, I flashed the incorrect ROM on my Xperia Z3v leaving the phone bricked. I am asking for your help. I have tried using the Flashtool but I am not certain if it's the phone or I that is causing a mistake. The steps thus far that I have followed.
Downloaded: Flashtool & Drivers
Installed: Drivers for Xperia Z3v
Downloaded: Firmware from XperiFirm
Now, the issue next is nothing shows up in my firmware when I attempt to flash. I have checked the source folder the .ftf files are there.
Furthermore:
When I hold VOL UP and plug in the USB>Blue led is indicated
When I hold VOL DOWN and plug in USB>Red flashes with a second of green whilst vibrating
Found this video on youtube: https://www.youtube.com/watch?v=dtaUxuorVSA
Exactly like this, checked for a solution seems like he repaired it via sony. Unfortunately for me I don't have that luxury.
**Update**
I installed the lastest release of flashtool (0.9.22.2) but it occurred to me to revert back to the previous release (0.9.18.6)
Now I can finally see the firmware but I am still having issues actually flashing the file. I get errors such as:
ERROR - root : this bundle is not valid
ERROR - Cannot delete C:\Users\Juan\.flashTool\firmwares\prepared\userdata.sin
**More Information**
I should include I am on a locked bootloader
Click to expand...
Click to collapse
got solved? me to have same problem
Bricked for days!
Is anyone still following this thread. I have the same problem after trying to install MIUI 6 on my rooted unlocked TWRP'd Xperia z3V. After the MIUI installation I have nothing but the symptoms below.
Not able to get into flashmode
No screen or bootup
No recovery
Symptoms:
1 -When plugged into PC or wall it only blinks RED/GREEN light and vibrates.
2 -Holding POWER the light turns and stays GREEN until released (then returns to #1)
3 -Holding POWER + VOLUME UP BLUE light stays on and puts phone in Fastboot mode
4 -Holding POWER + VOLUME DOWN does nothing (continues to do #1)
Please Help!!!
Google Sony Developers. Try to unlock your bootloader.
Sent from my D6708 using XDA-Developers mobile app
I think the phone will reject the command. Tried on a bricked z3v and that's the response I get from fastboot with the Sony commands given through the developer aite.
matrix$ said:
Is anyone still following this thread. I have the same problem after trying to install MIUI 6 on my rooted unlocked TWRP'd Xperia z3V. After the MIUI installation I have nothing but the symptoms below.
Not able to get into flashmode
No screen or bootup
No recovery
Symptoms:
1 -When plugged into PC or wall it only blinks RED/GREEN light and vibrates.
2 -Holding POWER the light turns and stays GREEN until released (then returns to #1)
3 -Holding POWER + VOLUME UP BLUE light stays on and puts phone in Fastboot mode
4 -Holding POWER + VOLUME DOWN does nothing (continues to do #1)
Please Help!!!
Click to expand...
Click to collapse
InkBastard said:
Google Sony Developers. Try to unlock your bootloader.
Sent from my D6708 using XDA-Developers mobile app
Click to expand...
Click to collapse
gunz.jones said:
I think the phone will reject the command. Tried on a bricked z3v and that's the response I get from fastboot with the Sony commands given through the developer aite.
Click to expand...
Click to collapse
The phone is not and most likely never will be bootloader unlocked. Planning to buy for another phone is your only option.
I've already moved to a tmo note 4. Not much development there either, but it's nice. Miss the z seires though and may come back to it next year. We'll see how they fair with phones for the next few months state side abs if prices even out on the x or z5.
I fixed mine
I bricked my phone it was just a paper weight Email Me I will make u a video step by step instructions to fix it
[email protected]
carldw said:
I bricked my phone it was just a paper weight Email Me I will make u a video step by step instructions to fix it
[email protected]
Click to expand...
Click to collapse
Unless you're going to post a link or YouTube video we all have access to, wouldn't bother asking people for direct email addresses to send them. That's the reason for PM'S and the forum on general. If you have a fix, we'd all like to know what it is you were able to do that none of us have figured out.
Need to Load Stock ROM
shashikiran said:
got solved? me to have same problem
Click to expand...
Click to collapse
Dear,
You have to load the Stock Rom / Flash it through the tool.
reroot the Phone and try again by clearing Dlavik Cache .
Sorry If am Wrong.
aranda.jc said:
With a Z3v. D6708. I have a problem, got a wrong ROM, the flashee and now not start the phone in any way. The only way to start is "System Recovery" volume + power, which has 4 options: 1. "Continue Power UP", 2. "Safe mode", 3. "Factory Reset" and 4. "Power Down". The thing is try from flashtool but when I give "volume down" and connect the computer does not recognize. When light it even reaches the boot animation. When I give power with USB cable is connected in a loop is vibrating and shows red, blue and green.
I have exactly the same problem of the youtube video.
As it could fix the problem?
Some help ?
Thank you !
Pd. The device only have FastBoot.
Click to expand...
Click to collapse
ok.you power down your phone
---------- Post added at 06:32 AM ---------- Previous post was at 06:21 AM ----------
1-power down your phone.
2-open the flashtool you can chose 32 or 64.almost we chosed flashtool 64.if you can't confirm it.you can oppen your computer and chesk naked (属性) then you will see your computer system is 32 or 64.
3-the new tool version is 0.23 and download it.install it on you computer C .
4Download the D6708 .ftf put it in C. the flashtool will led you. almost I will put it on C/user/.flash/firmwares
5-flash the software will lead you how to use you phone connect you computer with usb .
Hi All,
I know there are alot of similar threads but I would just like to get the forums opinion on what my options are with my bricked SM-G925F S6 Edge mobile?
Just to outline the chain of events, the phone is all stock, no custom kernel or custom ROM. and was never rooted. After applying the pushed Samsung Android update the phone crashed I manually rebooted via recovery mode and had to do a full system wipe as it continued to crash on boot. After reaching a stable boot the update was requesting to be downloaded once again which I accepted. All looked well and seemed to apply the update but the boot cycle crashed and has been un responsive ever since.
Tried to recover the device as below but no joy:
1.Long press power
2.Attempted power+volume down
3.No Recovery mode power+volume up+home
4.No Download mode power+volume down+home
5.All buttons together power+volume up/down+home
6.Plugging oem power charger no response
I would appreciate any advice, is a jtag the next route ?
Thanks in advance
celtic81 said:
Hi All,
I know there are alot of similar threads but I would just like to get the forums opinion on what my options are with my bricked SM-G925F S6 Edge mobile?
Just to outline the chain of events, the phone is all stock, no custom kernel or custom ROM. and was never rooted. After applying the pushed Samsung Android update the phone crashed I manually rebooted via recovery mode and had to do a full system wipe as it continued to crash on boot. After reaching a stable boot the update was requesting to be downloaded once again which I accepted. All looked well and seemed to apply the update but the boot cycle crashed and has been un responsive ever since.
Tried to recover the device as below but no joy:
1.Long press power
2.Attempted power+volume down
3.No Recovery mode power+volume up+home
4.No Download mode power+volume down+home
5.All buttons together power+volume up/down+home
6.Plugging oem power charger no response
I would appreciate any advice, is a jtag the next route ?
Thanks in advance
Click to expand...
Click to collapse
So the device is dead or unresponsive/bootloop?.
Sent from my SM-G925F
Dead pretty much sums it up yes.
celtic81 said:
Dead pretty much sums it up yes.
Click to expand...
Click to collapse
I think I read somewhere here usb jig is working on S6. Try your luck.
Sent from my SM-G925F
celtic81 said:
Hi All,
I know there are alot of similar threads but I would just like to get the forums opinion on what my options are with my bricked SM-G925F S6 Edge mobile?
Just to outline the chain of events, the phone is all stock, no custom kernel or custom ROM. and was never rooted. After applying the pushed Samsung Android update the phone crashed I manually rebooted via recovery mode and had to do a full system wipe as it continued to crash on boot. After reaching a stable boot the update was requesting to be downloaded once again which I accepted. All looked well and seemed to apply the update but the boot cycle crashed and has been un responsive ever since.
Tried to recover the device as below but no joy:
1.Long press power
2.Attempted power+volume down
3.No Recovery mode power+volume up+home
4.No Download mode power+volume down+home
5.All buttons together power+volume up/down+home
6.Plugging oem power charger no response
I would appreciate any advice, is a jtag the next route ?
Thanks in advance
Click to expand...
Click to collapse
1. What exactly is the phone doing now?
2. You deffinately cant boot into download mode? Try holding buttons for about 20 seconds and keep repeating?
3. Is the device detected when plugged into pc/smart switch?
4. Did you ever enable dev options and usb debugging?
callumbr1 said:
1. What exactly is the phone doing now?
2. You deffinately cant boot into download mode? Try holding buttons for about 20 seconds and keep repeating?
3. Is the device detected when plugged into pc/smart switch?
4. Did you ever enable dev options and usb debugging?
Click to expand...
Click to collapse
Current status unresponsive.
My hope was download mode but not happening.
No detection via smart switch.
Dev options would have been enabled yes.
Any merit in opening up to physically disconnect reconnect battery?
celtic81 said:
Current status unresponsive.
My hope was download mode but not happening.
No detection via smart switch.
Dev options would have been enabled yes.
Any merit in opening up to physically disconnect reconnect battery?
Click to expand...
Click to collapse
The first thing would be to flash stock.. but as you can't get into download mode its a bit tricky.
Have you tried to initialize phone with serial and imei with smart switch? This should detect phone and run emergency software fix?
I wouldnt attempt to remove my battery as you have to heat up the back to melt the glue to remove the glass.
Sometimes when the phone is in the state it is in its hard to get to download mode but it eventually does.
Try to get it powered off, keep holding power and vol down or just power for 20-40 seconds. It will eventually go off then try download mode.
celtic81 said:
Current status unresponsive.
My hope was download mode but not happening.
No detection via smart switch.
Dev options would have been enabled yes.
Any merit in opening up to physically disconnect reconnect battery?
Click to expand...
Click to collapse
If the phone still can be powered on but it's stuck somewhere during boot, can force reset by pressing power+vol down for 30s or more.
Sent from my SM-G925F
Not getting anywhere with the powering off/download mode, sounds defeatist, but looks like its done.
Does it mean anything that the phone doesn't recognise the power charger is connected either?
Rosli59564 said:
I think I read somewhere here usb jig is working on S6. Try your luck.
Click to expand...
Click to collapse
I think I will give the jig a go cant really lose any more than I already have. .
celtic81 said:
Not getting anywhere with the powering off/download mode, sounds defeatist, but looks like its done.
Does it mean anything that the phone doesn't recognise the power charger is connected either?
Click to expand...
Click to collapse
If it wont power on or recognise power charger that sounds like actually bricked phone or hardware problem. Safest way would be to just take it to service centre
---------- Post added at 05:15 AM ---------- Previous post was at 05:12 AM ----------
celtic81 said:
I think I will give the jig a go cant really lose any more than I already have. .
Click to expand...
Click to collapse
The usb jig only works up to s4
callumbr1 said:
If it wont power on or recognise power charger that sounds like actually bricked phone or hardware problem. Safest way would be to just take it to service centre
---------- Post added at 05:15 AM ---------- Previous post was at 05:12 AM ----------
The usb jig only works up to s4
Click to expand...
Click to collapse
Ok that's fair enough then. Will see if they can revive it.
What percentage chance of survival would you give it. 50/50 ?
celtic81 said:
Ok that's fair enough then. Will see if they can revive it.
What percentage chance of survival would you give it. 50/50 ?
Click to expand...
Click to collapse
Well as you said in your first post it was all stock and never rooted so they will more likely be able to revive it. Fingers crossed mate
callumbr1 said:
Well as you said in your first post it was all stock and never rooted so they will more likely be able to revive it. Fingers crossed mate
Click to expand...
Click to collapse
Thanks for all your replies its appreciated. Will let you know the outcome. .
celtic81 said:
Thanks for all your replies its appreciated. Will let you know the outcome. .
Click to expand...
Click to collapse
No problem mate keep me updated
callumbr1 said:
No problem mate keep me updated
Click to expand...
Click to collapse
Sorry for the delay in updating the outcome on this. Life got in the way. So basically the bootloader was bricked and needed rebuilding. JTAG was needed so was pretty lucky.
Thanks for all the responses...
Hi!
Today i shut down my device because i wanted to do a backup. But now my phone is not turning on anymore and i am also not comming in the recovery menu.
I am on the International 15s version i think and i didnt change anything, besides installing the adb drivers today.
There is no LED, and the phone is also dead if i plug it into the charger / to a pc. It is like in this video: https://youtu.be/x_h7phOFalc
Is there anything i can do?
Thank you!
Same Problem
I have Same Problem... I put the plug in the phone and Wall... Nothing... No LED No Boot.... I send it back to the Shop and I weit
I remember during the times when I had 1s that the guys were putting them on charge with the wall charger for 12 hours and then the led would come to life. Try that.
Of course that was an mtk chipset, but it might work for you as well.
Okay, i already left it on the charger for > 6 hours but no signs of life so far
Hi Guys,
You probably already tried that, but hold the "Power" button for at least 12 or 15 seconds.
I had the same problem : my phone went down after battery was depleted. I hook it up for 30 minutes... and thought it won't wake up.
But pressing the "Power" button really long helped...
Regards.
Kampfgans said:
Hi!
Today i shut down my device because i wanted to do a backup. But now my phone is not turning on anymore and i am also not comming in the recovery menu.
I am on the International 15s version i think and i didnt change anything, besides installing the adb drivers today.
There is no LED, and the phone is also dead if i plug it into the charger / to a pc. It is like in this video: https://youtu.be/x_h7phOFalc
Is there anything i can do?
Thank you!
Click to expand...
Click to collapse
Did you try plugging it in a different wall power socket? Also try using different wire and charging adapter. Try charging it from your PC's USB 3 port as (USB 3 port has slightly high power)
sanke1 said:
Did you try plugging it in a different wall power socket? Also try using different wire and charging adapter. Try charging it from your PC's USB 3 port as (USB 3 port has slightly high power)
Click to expand...
Click to collapse
Hi,
Yes i plugged it into 3 different sockets with 2 different chargers and 2 different cables, also via usb 3 and usb 2. No signs of life.
The only thing that happens is: When i connect it to the pc, it sometimes makes this "bing" for a connected usb device. The Windows Device Manager Shows me a "QUSB_BULK". But i cannt communicate to the phone via fastboot...
Any other ideas ?
Kampfgans said:
Hi,
Yes i plugged it into 3 different sockets with 2 different chargers and 2 different cables, also via usb 3 and usb 2. No signs of life.
The only thing that happens is: When i connect it to the pc, it sometimes makes this "bing" for a connected usb device. The Windows Device Manager Shows me a "QUSB_BULK". But i cannt communicate to the phone via fastboot...
Any other ideas ?
Click to expand...
Click to collapse
You tried to backup in recovery?
RISHI RAJ said:
You tried to backup in recovery?
Click to expand...
Click to collapse
What do you mean with recovery?
The display is always black, im not comming into recovery mode
Your device seems to be in Qualcomm Recovery mode.
Does it boot into fastboot mode?
Keep ( Power and Vol Down ) button combo pressed till you get the fastboot screen with chinese characters.
If you get that screen, then you can flash TeamSpain recovery, then perform factory reset and sideload any CM13 based rom.
If you do not get any of that, then I am afraid that you have to visit nearest LE Eco Service center to re-flash the factory firmware.
sanke1 said:
Your device seems to be in Qualcomm Recovery mode.
Does it boot into fastboot mode?
Keep ( Power and Vol Down ) button combo pressed till you get the fastboot screen with chinese characters.
If you get that screen, then you can flash TeamSpain recovery, then perform factory reset and sideload any CM13 based rom.
If you do not get any of that, then I am afraid that you have to visit nearest LE Eco Service center to re-flash the factory firmware.
Click to expand...
Click to collapse
No, unfortunately i dont get into the fastboot screen...
Kampfgans said:
What do you mean with recovery?
The display is always black, im not comming into recovery mode
Click to expand...
Click to collapse
I mean why did you switched it off to backup?You had custom recovery installed?
RISHI RAJ said:
I mean why did you switched it off to backup?You had custom recovery installed?
Click to expand...
Click to collapse
No, i had nothing installed.
I wanted to Backup it, but as i switched it of, the phone was just dead
Kampfgans said:
No, i had nothing installed.
I wanted to Backup it, but as i switched it of, the phone was just dead
Click to expand...
Click to collapse
I suspect your usb port could be broken and your phone is out of juice, so there is no way of bringing it back to life without the usb port. If you trust your DIY skills, you can watch a tear down video and hopefully see if all is well inside.
King Krued said:
I suspect your usb port could be broken and your phone is out of juice, so there is no way of bringing it back to life without the usb port. If you trust your DIY skills, you can watch a tear down video and hopefully see if all is well inside.
Click to expand...
Click to collapse
Hmm the battery had over 80% as this happend... I dont want to loose my warranty if i open it
Maybe there is no other way than sending it back to china
Then you should give it to Le Eco service center.
Did u find out what the problem was? Same thing happened to mine! It started with screen being unresponsive in the lower parts of the phone, then when I powered it off to see if that would help, it just wouldn't power on anymore. No sign of life! Wtf is happening
---------- Post added at 02:25 PM ---------- Previous post was at 02:24 PM ----------
If you don't mind me asking, where did u get it from?
Mavrik666 said:
Did u find out what the problem was? Same thing happened to mine! It started with screen being unresponsive in the lower parts of the phone, then when I powered it off to see if that would help, it just wouldn't power on anymore. No sign of life! Wtf is happening
---------- Post added at 02:25 PM ---------- Previous post was at 02:24 PM ----------
If you don't mind me asking, where did u get it from?
Click to expand...
Click to collapse
Did you try rooting or flashing custom recovery?
RISHI RAJ said:
Did you try rooting or flashing custom recovery?
Click to expand...
Click to collapse
Never tinkered with any of that. Plugging it into PC does nothing either. seems completely dead.
Mavrik666 said:
Never tinkered with any of that. Plugging it into PC does nothing either. seems completely dead.
Click to expand...
Click to collapse
Im very much scared now.Guess Ive made a mistake by trusting on This Chinese brand.Please Contact Letv company & ask the reason behind it & update here.If its related to motherboard like in LG G4
---------- Post added at 06:22 PM ---------- Previous post was at 05:51 PM ----------
Which Model you both had?
Hey all
Bought this phone because it seemed great on paper.
Sadly I had very huge trouble getting twrp and root on it.
Tried the one post on xdevelpoers and got my phone finally bricked.
It starts up and resets all the time. It doesnt get past the "orange state, your device has been unlocked, please wait 5 seconds for boot"
It just crashes after 3 seconds and restarts all the time. Im unable to get into recovery or fastboot or anything.
This ****ing **** is driving me crazy. Ive never seen so many false information on the internet.
I had many phones bricked but still easy fixed. This is completly new for me and never happened before.
janii said:
Hey all
Bought this phone because it seemed great on paper.
Sadly I had very huge trouble getting twrp and root on it.
Tried the one post on xdevelpoers and got my phone finally bricked.
It starts up and resets all the time. It doesnt get past the "orange state, your device has been unlocked, please wait 5 seconds for boot"
It just crashes after 3 seconds and restarts all the time. Im unable to get into recovery or fastboot or anything.
This ****ing **** is driving me crazy. Ive never seen so many false information on the internet.
I had many phones bricked but still easy fixed. This is completly new for me and never happened before.
Click to expand...
Click to collapse
Are you unable to get into download mode?
agatgamez said:
Are you unable to get into download mode?
Click to expand...
Click to collapse
Thanks for your reply
If I try power button + volume up: Phone vibrates. Stays black for 3 seconds. Then (I think) it resets, vibrates again and simply tries to boot the phone.
After that the phone just resets after 3-5 seconds forever.
Before the bricking, this usualy lead me directly to a screen where I could choose recovery or fastbood mode.
Power button + volume down doesnt do anything I believe (neither did it before)
Alright I got something else now.
Read about some unbricking ways.
One suggested launching SP flash tool, clicking on auto format and starting it. Then plugging the phone in.
I did that. It said formatting success after like 3 seconds.
Now my phone doesnt boot at all. Its just black. Nothing happens when I power on. No vibration.
LED still shows when I try to charge. PC also now says unknown usb device or something detected.
Is it all over now lol?
janii said:
Alright I got something else now.
Read about some unbricking ways.
One suggested launching SP flash tool, clicking on auto format and starting it. Then plugging the phone in.
I did that. It said formatting success after like 3 seconds.
Now my phone doesnt boot at all. Its just black. Nothing happens when I power on. No vibration.
LED still shows when I try to charge. PC also now says unknown usb device or something detected.
Is it all over now lol?
Click to expand...
Click to collapse
I don't think so but a lot of devices In situations like this require either a unlocked bootloader and USB debugging. I will try to see if I can help you. I know if your frustrated. And this is not really my area but I try to help as many as possible
---------- Post added at 10:12 PM ---------- Previous post was at 10:08 PM ----------
janii said:
Alright I got something else now.
Read about some unbricking ways.
One suggested launching SP flash tool, clicking on auto format and starting it. Then plugging the phone in.
I did that. It said formatting success after like 3 seconds.
Now my phone doesnt boot at all. Its just black. Nothing happens when I power on. No vibration.
LED still shows when I try to charge. PC also now says unknown usb device or something detected.
Is it all over now lol?
Click to expand...
Click to collapse
To be able to fully help you right, I would have to know your devices name or build number( example sm-a510f) and just possibly if you are able to access anything
janii said:
Alright I got something else now.
Read about some unbricking ways.
One suggested launching SP flash tool, clicking on auto format and starting it. Then plugging the phone in.
I did that. It said formatting success after like 3 seconds.
Now my phone doesnt boot at all. Its just black. Nothing happens when I power on. No vibration.
LED still shows when I try to charge. PC also now says unknown usb device or something detected.
Is it all over now lol?
Click to expand...
Click to collapse
So flash tool needs drivers to allow it to see your device see if you have installed the driver's and see what happens......
Have here one such device and it won`t power up even after flashing with
GQ3056MF2_HCS986A_ulefone_20180620_G18
in folder there is bom10-n1_Power_3S_G02_user
Totally 3.73 GB
Somebody to advice something ?
i will be looking for fix now...
I have the same problem with ulefone power 3
I can't install any rom on my ulefone power 3 see the photos
https://imgshare.io/image/Dwip9
https://imgshare.io/image/DwyiO
janii said:
Hey all
Bought this phone because it seemed great on paper.
Sadly I had very huge trouble getting twrp and root on it.
Tried the one post on xdevelpoers and got my phone finally bricked.
It starts up and resets all the time. It doesnt get past the "orange state, your device has been unlocked, please wait 5 seconds for boot"
It just crashes after 3 seconds and restarts all the time. Im unable to get into recovery or fastboot or anything.
This ****ing **** is driving me crazy. Ive never seen so many false information on the internet.
I had many phones bricked but still easy fixed. This is completly new for me and never happened before.
Click to expand...
Click to collapse
How did you solve it, I have the same problem