i flashed carbon rom on my moto e which was earlier running cm 11. then after the flashing process it dint boot.so i tried flashing stock firmware after that too it aint booting it is just stuck at boot logo nothing else dont know guys plss help pls help
Does it vibrate while on the boot logo (meaning that it's running the initrd)?
Ryccardo said:
Does it vibrate while on the boot logo (meaning that it's running the initrd)?
Click to expand...
Click to collapse
yes it does but it still gets stuck at m logo powered by android nothing else
Kadam_sahil said:
yes it does but it still gets stuck at m logo powered by android nothing else
Click to expand...
Click to collapse
And you flashed both kernel (boot.img) and system from a 4.4.4 stock image for your model, erased userdata in fastboot, yet it's still on the bootlogo?
Just see clearing data, cache , dalvik cache and hard reset and also go to advance and fix the permissions...!! If it doesnt then think that u have soft bricked ur device try this...??
---------- Post added at 03:51 AM ---------- Previous post was at 03:46 AM ----------
If this dont resolve ur problem then try unbricking by this link..!!
http://unbrick.itcse.com/unbrick-soft-bricked-moto-e/
Ryccardo said:
And you flashed both kernel (boot.img) and system from a 4.4.4 stock image for your model, erased userdata in fastboot, yet it's still on the bootlogo?
Click to expand...
Click to collapse
i think i flashed it incomplete.....means i got some no error stuff...also i didnt erase userdata after that..so please you could find someway
prathameshmestry said:
Just see clearing data, cache , dalvik cache and hard reset and also go to advance and fix the permissions...!! If it doesnt then think that u have soft bricked ur device try this...??
the link says only for xt1021 ...no xt1022 so not sure cause it cud possibly harm my device more also cwm doesnt have fix permissions in my phone sry pls some other way also when i extract my firmware it says checksum error and stops it says system.img corrupt
Click to expand...
Click to collapse
Did u try flashing orignal rom through android adb
---------- Post added at 02:42 PM ---------- Previous post was at 02:37 PM ----------
Kadam_sahil said:
prathameshmestry said:
Just see clearing data, cache , dalvik cache and hard reset and also go to advance and fix the permissions...!! If it doesnt then think that u have soft bricked ur device try this...??
the link says only for xt1021 ...no xt1022 so not sure cause it cud possibly harm my device more also cwm doesnt have fix permissions in my phone sry pls some other way also when i extract my firmware it says checksum error and stops it says system.img corrupt
Click to expand...
Click to collapse
Try just flashing othe recovery because the cwm gives issues so try flashing twrp recovery and then flash orignal firmware from that recovery..!! Think this must fix
Click to expand...
Click to collapse
Thanks for u replies.
I sorted it out.Flashed cm 11 through adb sideload and all in
It booted.
i have same problem.
sir, i have same problem could you please tell me procedure or give link if possible?
pritesharyan said:
sir, i have same problem could you please tell me procedure or give link if possible?
Click to expand...
Click to collapse
Let phone drain battery till it switches off.Charge you phone don't switch on phone let it charge for 80% then press vol down + power key for 30 sec then phone will booted into recovery.
1)Go to wipe
wipe
cache
internal
dalvik
data
2)Go to install
select rom flash it
reboot
wait for phone to boot.This will work if you have twrp installed.
Else follow this Guide
http://dev-viraj.blogspot.in/2015/02/flash-official-android-444-on-moto-e.html
Related
help,HLEP.
my GT is died~~~~
yestday it works very well
but , today,when I flash a rom ,at the begining ,it very well
then, it reboot by itself!~~~~~
then I flash another ROM, the same problem happen ,
NOW whatever rom , it reboot by itself ,~~~~
what should I do~~???
flash via odin stock rom gingerbread
lexyin said:
help,HLEP.
my GT is died~~~~
yestday it works very well
but , today,when I flash a rom ,at the begining ,it very well
then, it reboot by itself!~~~~~
then I flash another ROM, the same problem happen ,
NOW whatever rom , it reboot by itself ,~~~~
what should I do~~???
Click to expand...
Click to collapse
What ROM did you flash ?
lexyin said:
then, it reboot by itself!~~~~~
Click to expand...
Click to collapse
well seems like you are in bootloop.....
if you know something about recovery then go to it and wipe data
EmoBoiix3 said:
What ROM did you flash ?
Click to expand...
Click to collapse
every rom !!
I flashed zckpb,zckc1,zskpd,cm7-kang~~~every rom has happened this ,~~~
standard name said:
flash via odin stock rom gingerbread
Click to expand...
Click to collapse
what is this mean??I dont understand~~
madman_amit said:
well seems like you are in bootloop.....
if you know something about recovery then go to it and wipe data
Click to expand...
Click to collapse
no ~~it is not bootloop.....~~
as I said,when I used~~it reboot ~~~forexample:when I phoning~~It reboot ~~I dont known why~~every rom has this problem
lexyin said:
what is this mean??I dont understand~~
Click to expand...
Click to collapse
Odin is a software.For more information on flashing via Odin,go http://forum.xda-developers.com/showthread.php?t=1034145
---------- Post added at 07:08 PM ---------- Previous post was at 07:06 PM ----------
lexyin said:
no ~~it is not bootloop.....~~
as I said,when I used~~it reboot ~~~forexample:when I phoning~~It reboot ~~I dont known why~~every rom has this problem
Click to expand...
Click to collapse
You mean,you can turn the phone on,it boots fine and then when you phone with it,it reboots....weird
try remove the battery, go in recovery mod and do a wipe/data reset after flash the stock rom
lexyin said:
help,HLEP.
my GT is died~~~~
yestday it works very well
but , today,when I flash a rom ,at the begining ,it very well
then, it reboot by itself!~~~~~
then I flash another ROM, the same problem happen ,
NOW whatever rom , it reboot by itself ,~~~~
what should I do~~???
Click to expand...
Click to collapse
switch off your ace... HOLD PRESS MIDDDLE KEY+then press on power on button... leave power on screen as the screen open but hold on middle button till you get to recoery....
FACTORY RESTE WIPE CACHE WIPE DALVIK CACHE.. FORMAT SD , SD-EXT .... (remove SIM )... (FOLLOW IT EVERY TIME BEFORE U FLASH A ROM) ...
now flash via ODIN (if flashing STCOK ROM)
for custom rom prefer FLASHING BY CLOCKWORKMOD 4 (clockworkmod 5 is for cyanogen)
so i did something stupid i know.. i put viper 2.0.2 on without doing a full wipe, just installed it over the old viper 1.0.0.. now it just keeps rebooting.. when i try to use the power+vol down to get into recovery, it just goes to a hboot screen that says parsing..[sd zip] [1] recovery and asking if i want to start the update.. if i do, it does something then asks to reboot and when i do, it just goes back into the reboot loop.. i did try the viper boot-img-flasher 1.2.1 and when it gets into a part of the reboot, the program does see the device and does its thing, makes my phone reboot into a fastboot screen, then i do the boot.img part and it seems to work fine, then it reboots, and starts going into the loop again.. is there any way i can get to recovery so i can just do a full wipe and install the ROM again? i also tried using the current RUU and it did look like it worked once, but then just kept going into the bootloop.. so that dont seem to be working either... thanks in advance for any help.. i feel stuck...
bbernstone said:
so i did something stupid i know.. i put viper 2.0.2 on without doing a full wipe, just installed it over the old viper 1.0.0.. now it just keeps rebooting.. when i try to use the power+vol down to get into recovery, it just goes to a hboot screen that says parsing..[sd zip] [1] recovery and asking if i want to start the update.. if i do, it does something then asks to reboot and when i do, it just goes back into the reboot loop.. i did try the viper boot-img-flasher 1.2.1 and when it gets into a part of the reboot, the program does see the device and does its thing, makes my phone reboot into a fastboot screen, then i do the boot.img part and it seems to work fine, then it reboots, and starts going into the loop again.. is there any way i can get to recovery so i can just do a full wipe and install the ROM again? i also tried using the current RUU and it did look like it worked once, but then just kept going into the bootloop.. so that dont seem to be working either... thanks in advance for any help.. i feel stuck...
Click to expand...
Click to collapse
Take out your sd card until you get to recovery.
Sent from my EVO using Tapatalk 2
thicklizard said:
take out your sd card until you get to recovery.
Sent from my evo using tapatalk 2
Click to expand...
Click to collapse
thanks!! Didnt even think of that!!
ok.. well that worked and i was able to go into the recovery and install the viper 2.0.2 again and did it using the full wipe choice.. now it just reboots into the fastboot loader and wont just boot up.. it goes into the bootloader every time... sorry.. got any more ideas? thanks mucho...
bbernstone said:
ok.. well that worked and i was able to go into the recovery and install the viper 2.0.2 again and did it using the full wipe choice.. now it just reboots into the fastboot loader and wont just boot up.. it goes into the bootloader every time... sorry.. got any more ideas? thanks mucho...
Click to expand...
Click to collapse
When you wiped did you wipe system cache Dalvik cache and factory reset?
Sent from my EVO using Tapatalk 2
---------- Post added at 05:07 PM ---------- Previous post was at 05:06 PM ----------
Also you might want to try to fastboot the boot.img
Sent from my EVO using Tapatalk 2
thicklizard said:
When you wiped did you wipe system cache Dalvik cache and factory reset?
Sent from my EVO using Tapatalk 2
---------- Post added at 05:07 PM ---------- Previous post was at 05:06 PM ----------
Also you might want to try to fastboot the boot.img
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
yes.. i did wipe cache, dalvik cache, and factory reset, but i dont think it did anything... i then tried to use RUU to get it back to factory rom, but it fails when it start to go install it.. hangs up with the HTC logo on the phone screen..
You need to flash the kernel in fastboot, there is another thread with the same issue, I posted a copy of adb tools and instructions on flashing the boot.img
om4 said:
You need to flash the kernel in fastboot, there is another thread with the same issue, I posted a copy of adb tools and instructions on flashing the boot.img
Click to expand...
Click to collapse
ok.. that did it.. it was the boot.img... thanks!!
Hi, i put the wrong rom on my i9300 and it went into a boot loop and i want to put the right rom on. i downloaded it on my computer but i can't transfer my files until i actual boot successfully. any suggestions? unfortunately, i haven't backed up my phone in a while so i wouldn't really want to factory reset.
grab a sd card and put the files on them, then flash in recovery
Kyle Maclean said:
Hi, i put the wrong rom on my i9300 and it went into a boot loop and i want to put the right rom on. i downloaded it on my computer but i can't transfer my files until i actual boot successfully. any suggestions? unfortunately, i haven't backed up my phone in a while so i wouldn't really want to factory reset.
Click to expand...
Click to collapse
Good evening!!!
Try to reboot on CWM and delete cache and dalvik cache,
I am pretty sure that will be end on a succesful boot (it happened to me a few times)
---------- Post added at 08:54 PM ---------- Previous post was at 08:53 PM ----------
brom25 said:
grab a sd card and put the files on them, then flash in recovery
Click to expand...
Click to collapse
He says he can't boot. So it's files are unaccesable to him
worf_1977 said:
Good evening!!!
Try to reboot on CWM and delete cache and dalvik cache,
I am pretty sure that will be end on a succesful boot (it happened to me a few times)
Click to expand...
Click to collapse
i tried deleting dalivik cache and wiping cache but that didnt work
Kyle Maclean said:
i tried deleting dalivik cache and wiping cache but that didnt work
Click to expand...
Click to collapse
Try to flash a stock ROM, and see what happens next then
No, don't flash a stock ROM, because then you will HAVE to do a factory reset.
Can you access recovery? Push the file via adb.
And anyway, you have to do a factory reset when switching ROMs, what were you thinking?
Hi, i solved the problem, first of all, it was a bad rom and then i was using outdated gapps. none of my non-system google apps work but i'll just solve that by intalling and reinstalling them. at least play works
After I flashed stock ROM. The Phone keeps on blinking Samsung Galaxy S3 GT I9300 Logo. Doesn't start. Tried reflashing other stock ROMs. Tried Factory Reset as well..Please Help
You can try flashing Philz recovery via odin, then run a mega wipe script to fully format system, data and preload.
In recovery does it show any errors?
boomboomer said:
You can try flashing Philz recovery via odin, then run a mega wipe script to fully format system, data and preload.
In recovery does it show any errors?
Click to expand...
Click to collapse
No error is shown...but the android robot logo appears with a red indicator(red hazard sign) at top...but wipe cache and data works perfectly..
Try using a usb jig, them flash tje r with full wipe.
Sent from my HTC HD2 using xda app-developers app
tatz619 said:
After I flashed stock ROM. The Phone keeps on blinking Samsung Galaxy S3 GT I9300 Logo. Doesn't start. Tried reflashing other stock ROMs. Tried Factory Reset as well..Please Help
Click to expand...
Click to collapse
in download mode what does it show under PRODUCT NAME? if it is empty, the phone is screwed and service center in required.
boomboomer said:
You can try flashing Philz recovery via odin, then run a mega wipe script to fully format system, data and preload.
In recovery does it show any errors?
Click to expand...
Click to collapse
Tried mega wipe.zip from this thread. http://forum.xda-developers.com/showthread.php?t=1832326
No use..
Tried formatting everything using Philz recovery.. no use...
tatz619 said:
Tried mega wipe.zip from this thread. http://forum.xda-developers.com/showthread.php?t=1832326
No use..
Tried formatting everything using Philz recovery.. no use...
Click to expand...
Click to collapse
Read and reply to post 7
sriram231092 said:
in download mode what does it show under PRODUCT NAME? if it is empty, the phone is screwed and service center in required.
Click to expand...
Click to collapse
Product Name shows GT I9300...
tatz619 said:
Tried mega wipe.zip from this thread. http://forum.xda-developers.com/showthread.php?t=1832326
No use..
Tried formatting everything using Philz recovery.. no use...
Click to expand...
Click to collapse
What firmware are you flashing ??
Did you initially flash a wrong firmware ??
Hi
I'm new to the forums and just wondering if anyone can help me out.
I've just started exploring custom ROMs and the like. I've flashed and rooted my Galaxy SIII about four times and never had any problems. Just yesterday I flashed the latest stable build of Slimbean and when I went to root it afterwards it completed the process but wouldn't start. Now it's stuck in a boot loop. I can't access download or recovery mode. Please Help!!!!!!!!
rmamaniac said:
Hi
I'm new to the forums and just wondering if anyone can help me out.
I've just started exploring custom ROMs and the like. I've flashed and rooted my Galaxy SIII about four times and never had any problems. Just yesterday I flashed the latest stable build of Slimbean and when I went to root it afterwards it completed the process but wouldn't start. Now it's stuck in a boot loop. I can't access download or recovery mode. Please Help!!!!!!!!
Click to expand...
Click to collapse
Your question is posted multiple times SEARCH/
Basics read first.
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts .
Wipe data + cache + davlik cache
---------- Post added at 01:32 PM ---------- Previous post was at 12:53 PM ----------
if doesn't work re update your device
TheDarkLegend said:
Wipe data + cache + davlik cache
---------- Post added at 01:32 PM ---------- Previous post was at 12:53 PM ----------
if doesn't work re update your device
Click to expand...
Click to collapse
How can I wipe cache or preform a factory reset if i can't access recovery mode?
Please help!
The phone is not rooted and is fully stock. It was working just fine last night but in the morning, the phone was stuck in eRecovery.
I tried downloading the latest version and recovery from the given options but it displays the message 'Getting package info failed' (It connects to the home WI-FI)
I have not backed up the phone in a months time so is there any way to recover the data before performing a factory reset?
Any help would be greatly appreciated...
Aren't you able to boot normally now?
Try if it boots to recovery or fastboot
From there try as
Fastboot reboot.
Or in recovery, try clearing cache only and boot.
If all above fails, just dload the current firmware you had.
shashank1320 said:
Aren't you able to boot normally now?
Try if it boots to recovery or fastboot
From there try as
Fastboot reboot.
Or in recovery, try clearing cache only and boot.
If all above fails, just dload the current firmware you had.
Click to expand...
Click to collapse
It doesn't boot up. When the phone is turned on, it goes to recovery...
I'll try to fastboot reboot
I cleared cache, no luck
I'll check how to dload and see if it works
Sorry to hear you that. Another member and I got hit by it as well. Unfortunately a hard reset was the only solution to solve it.
Maybe you'd have better luck that us.
The discussion was here https://forum.xda-developers.com/mate-10/help/mate-10-pro-bootloop-official-update-t3934740
Cheers.
tgmuneer said:
Sorry to hear you that. Another member and I got hit by it as well. Unfortunately a hard reset was the only solution to solve it.
Maybe you'd have better luck that us.
The discussion was here https://forum.xda-developers.com/mate-10/help/mate-10-pro-bootloop-official-update-t3934740
Cheers.
Click to expand...
Click to collapse
Seems like I'd have to do the same...
Thank you for directing me to the post
edirisinghe30 said:
Seems like I'd have to do the same...
Thank you for directing me to the post
Click to expand...
Click to collapse
No worries.
Cheers
hello there , my device Huawei Mate 10 Lite suddenly restarts this morning and now stucks in Recovery Mode. I'e tried every option like downloading the latest version and recovery. It successfully downloads and installs, but still stuck in recovery . I've tried hard reset option and wipe cache partition also but still the issue is same. "Stucks in recovery". Can any one please tell me the solution ???
Immad9555 said:
hello there , my device Huawei Mate 10 Lite suddenly restarts this morning and now stucks in Recovery Mode. I'e tried every option like downloading the latest version and recovery. It successfully downloads and installs, but still stuck in recovery . I've tried hard reset option and wipe cache partition also but still the issue is same. "Stucks in recovery". Can any one please tell me the solution ???
Click to expand...
Click to collapse
What did you do in the first place, for it to be stuck in recovery?
Hayeni said:
What did you do in the first place, for it to be stuck in recovery?
Click to expand...
Click to collapse
i didn't do anything. I was on a whatsapp call and phone suddenly reboots, after rebooting it was in recovery mode directly.
Immad9555 said:
i didn't do anything. I was on a whatsapp call and phone suddenly reboots, after rebooting it was in recovery mode directly.
Click to expand...
Click to collapse
can you suggest any solution ?
---------- Post added at 01:51 PM ---------- Previous post was at 01:49 PM ----------
edirisinghe30 said:
It doesn't boot up. When the phone is turned on, it goes to recovery...
I'll try to fastboot reboot
I cleared cache, no luck
I'll check how to dload and see if it works
Click to expand...
Click to collapse
is your problem solved, regarding mate 10 lite stucks in recovery ? if yes, do tell me the solution you used ....