Hi, i have a s5839i but running s5830i firmware. I have finally managed to install clockworkmod 5.0.2.6 after much hassle. I wanted to install cyanogenmod 11 but to do this i must have clockworkmod 6. I tried to install cwm 6 but it wont work. So which rom can i flash with cwm 5?
Benholder90 said:
Hi, i have a s5839i but running s5830i firmware. I have finally managed to install clockworkmod 5.0.2.6 after much hassle. I wanted to install cyanogenmod 11 but to do this i must have clockworkmod 6. I tried to install cwm 6 but it wont work. So which rom can i flash with cwm 5?
Click to expand...
Click to collapse
Every rom which is not cm11.
Ask question in q and a section.
Envy-X said:
Every rom which is not cm11.
Ask question in q and a section.
Click to expand...
Click to collapse
Managed to install cwm 6 and cm11 in the end. Do you have links for any other roms?
Benholder90 said:
Managed to install cwm 6 and cm11 in the end. Do you have links for any other roms?
Click to expand...
Click to collapse
Don't create a thread for asking questions in development section....
Related
Hi,
I'm kind of new to rooting and I have some questions.
Right now I'm using cyanogenmod 7.1 and now I want to install MIUI rom,
do I have to remove things first to install it or can I install with odin right away?
I have searched evereywhere but I couldnt find an answer.
ns4623 said:
Hi,
I'm kind of new to rooting and I have some questions.
Right now I'm using cyanogenmod 7.1 and now I want to install MIUI rom,
do I have to remove things first to install it or can I install with odin right away?
I have searched evereywhere but I couldnt find an answer.
Click to expand...
Click to collapse
Its a question of following the instructions for the rom you intend to install .
jje
ns4623 said:
Hi,
I'm kind of new to rooting and I have some questions.
Right now I'm using cyanogenmod 7.1 and now I want to install MIUI rom,
do I have to remove things first to install it or can I install with odin right away?
I have searched evereywhere but I couldnt find an answer.
Click to expand...
Click to collapse
there is no ODIN flashable MIUI ROM available.
from Cyanogenmode you can staight away flash MIUI ROM from Clockworkmod as I did last time...
Hi, I have updated and rooted my phone a while ago so I have forgotten a few things... I have CyanogenMod 9.1.0 and android version is 4.0.4... And now I came here and saw that there is android 4.2 and CM 10.1.... But I didn't found any information for updating between those two, there is only for coming from stock firmware. Can I just download 10.1 and install it from Clockwork mod or should I first update to 4.2 and how to do it?
Wipe data/factory reset after flashing the kernel for the new version and install the rom in cwm. All your data will be lost, but your phone should boot
Btw please ask questions in the Q&A forum
Sent from my Nexus 4 running Android 4.2.2
mihahn said:
Wipe data/factory reset after flashing the kernel for the new version and install the rom in cwm. All your data will be lost, but your phone should boot
Btw please ask questions in the Q&A forum
Sent from my Nexus 4 running Android 4.2.2
Click to expand...
Click to collapse
Sorry for the wrong forum...
And tnx for the reply... So no need to update to 4.2 manually, just kernel for rom and then rom?? Will it be like that for any onther custom rom?
filipbg said:
Sorry for the wrong forum...
And tnx for the reply... So no need to update to 4.2 manually, just kernel for rom and then rom?? Will it be like that for any onther custom rom?
Click to expand...
Click to collapse
Yes it's the same for all custom roms. Flash the kernel, boot in cwm and do the wipes, then flash the rom
Btw you could read my guide on how to install a custom rom/kernel to get more information. The link is in the "Roll up sticky thread" in the stickies in general forum :good:
Sent from my Nexus 4 running Android 4.2.2
filipbg said:
Sorry for the wrong forum...
And tnx for the reply... So no need to update to 4.2 manually, just kernel for rom and then rom?? Will it be like that for any onther custom rom?
Click to expand...
Click to collapse
this is the manual way (automatic is SEUS ).. but to ur question yes, it so:
before installing rom, check which kernel needed for this (or if its inside zip, to flash BEFORE install; via fastboot..)
if u switch between stock ics & cm builds OR between cm9 and cm10(.1) FULL WIPE IS recommended!!
if u do only a upgrade like install newest version of smae rom on ur phone u can WIPE NOTHING! (only if u get problem )
yes 1st kernel (recovery (CWM) built in) then ROM ; maybe some addons/gapps (google apps), dun
peace
Hii!! :laugh:
I hope I am not making an error by posting here, I am a little new to here so be king please :angel:
I just want to install Philz CMW6 on my I9100G so I can install a kitkat custom ROM; I have been facing problems with this, I tried many ROMs ( CM11 unofficial, SuperNexus, SlimRom, OmniROM .. ) but I failed everytime, I realized that my CWM was not suitable. So I started looking for it I found a good thread http://forum.xda-developers.com/showthread.php?t=2201860 after installing the CWM it goes right installing ROMs but got stuck into bootloop.
So, if someone can give me the .tar.md5 file I can flash using Odin or maybe another thing to take care of.
Thank you
PS: I had CM 10.2
Running official stock ROM : JB 4.1.2
thesm said:
Hii!! :laugh:
I hope I am not making an error by posting here, I am a little new to here so be king please :angel:
I just want to install Philz CMW6 on my I9100G so I can install a kitkat custom ROM; I have been facing problems with this, I tried many ROMs ( CM11 unofficial, SuperNexus, SlimRom, OmniROM .. ) but I failed everytime, I realized that my CWM was not suitable. So I started looking for it I found a good thread http://forum.xda-developers.com/showthread.php?t=2201860 after installing the CWM it goes right installing ROMs but got stuck into bootloop.
So, if someone can give me the .tar.md5 file I can flash using Odin or maybe another thing to take care of.
Thank you
PS: I had CM 10.2
Running official stock ROM : JB 4.1.2
Click to expand...
Click to collapse
Try this steps:
1. Use the method in this thread (http://forum.xda-developers.com/showthread.php?t=2365701) to flash JB stock + root. note that it's better to flash the kernel via recovery after it's on your external sd-card or sideload with adb. This way you don't get the triangle warning and no binary count.
2. Download the kitkat compatible CWM from here: (http://downloadandroidrom.com/file/GalaxyS2/recovery/CWM-KitKatCompatible-i9100.zip)
3. Flash the CWM and reboot to recovery (advanced -> reboot recovery)
4. Flash your Kitkat rom (with all the necessary wipes of course )
PureMind0 said:
Try this steps:
1. Use the method in this thread (http://forum.xda-developers.com/showthread.php?t=2365701) to flash JB stock + root. note that it's better to flash the kernel via recovery after it's on your external sd-card or sideload with adb. This way you don't get the triangle warning and no binary count.
2. Download the kitkat compatible CWM from here: (http://downloadandroidrom.com/file/GalaxyS2/recovery/CWM-KitKatCompatible-i9100.zip)
3. Flash the CWM and reboot to recovery (advanced -> reboot recovery)
4. Flash your Kitkat rom (with all the necessary wipes of course )
Click to expand...
Click to collapse
I tried this but I got stuck on boot again, and knowing that the CWM that you gived don't work :/ ( my model is I9100G I think that this is the reason ).
I have read somewhere that maybe the wipe data / factory reset is the source of problem. I am not sure where I am doing wrong
thanks
thesm said:
I tried this but I got stuck on boot again, and knowing that the CWM that you gived don't work :/ ( my model is I9100G I think that this is the reason ).
I have read somewhere that maybe the wipe data / factory reset is the source of problem. I am not sure where I am doing wrong
thanks
Click to expand...
Click to collapse
oh then I've missed the G :\
in that case you should probably try this thread http://forum.xda-developers.com/showthread.php?t=2199288
stock firmwares for i9100G
PureMind0 said:
oh then I've missed the G :\
in that case you should probably try this thread http://forum.xda-developers.com/showthread.php?t=2199288
stock firmwares for i9100G
Click to expand...
Click to collapse
Hi again!
I flashed stock ROM 4.1.3 and my phone's is going good. but I'm having troubles to go back to CM I don't see what the problem is but I think to change the phone, maybe it's enough for it
And I think about buying a tablet, what do you think Nexus 7 or Samsung Tab 3 ?
thesm said:
Hi again!
I flashed stock ROM 4.1.3 and my phone's is going good. but I'm having troubles to go back to CM I don't see what the problem is but I think to change the phone, maybe it's enough for it
And I think about buying a tablet, what do you think Nexus 7 or Samsung Tab 3 ?
Click to expand...
Click to collapse
Ask here
http://forum.xda-developers.com/showthread.php?t=1846277
Sent from my GT-I9100 using Tapatalk 2
Hello everyone,
Today I tried to install a new rom on my Samsung Galaxy SII I9100 but I got some problems.
I had already rooted my phone and installed Philz recovery.
The problem is that I keep getting the same error: status 7. I saw I need to update my Philz recovery but I don't understand how to do that. Can someone help me with that? After I update the recovery I want to install the rom Beanstalk with Google Apps is this compatible?
Thanks in advance for your help!
samzelf said:
Hello everyone,
Today I tried to install a new rom on my Samsung Galaxy SII I9100 but I got some problems.
I had already rooted my phone and installed Philz recovery.
The problem is that I keep getting the same error: status 7. I saw I need to update my Philz recovery but I don't understand how to do that. Can someone help me with that? After I update the recovery I want to install the rom Beanstalk with Google Apps is this compatible?
Thanks in advance for your help!
Click to expand...
Click to collapse
If u see the OP (First post) of any KK rom thread u will find the Link for the KK compatible kernel (with latest CWM recovery), dwnld the same and flash it using 'Philz' recovery and then u are ready to flash any KK rom
Sun90 said:
If u see the OP (First post) of any KK rom thread u will find the Link for the KK compatible kernel (with latest CWM recovery), dwnld the same and flash it using 'Philz' recovery and then u are ready to flash any KK rom
Click to expand...
Click to collapse
Thank you for you reply. I can't see the kernel download link on the Beanstalk rom tread: http://forum.xda-developers.com/gal...tives/rom-beanstalk-i9100-unofficial-t2580489
Could you help me with this?
samzelf said:
Thank you for you reply. I can't see the kernel download link on the Beanstalk rom tread: http://forum.xda-developers.com/gal...tives/rom-beanstalk-i9100-unofficial-t2580489
Could you help me with this?
Click to expand...
Click to collapse
Find the same in the link below
http://mirror21.downloadandroidrom.com/file/GalaxyS2/recovery/CWM-KitKatCompatible-i9100.zip
Sun90 said:
Find the same in the link below
Thank you very much!
So I need to go to Philz recovery then then install zip from SD card then select the Recovery and after that reboot?
Click to expand...
Click to collapse
samzelf said:
Sun90 said:
Find the same in the link below
Thank you very much!
So I need to go to Philz recovery then then install zip from SD card then select the Recovery and after that reboot?
Click to expand...
Click to collapse
place both the zip file the cwm one as well as the KK rom (beanstalk in your case) on ur phones internal sdcard.
then reboot to philz recovery and first flash the CWM zip and then again reboot back to recovery.
Do all the wipes using the latest CWM recovery as per the install instruction on the Bean stalk thread and flash the rom.
Click to expand...
Click to collapse
Sun90 said:
samzelf said:
place both the zip file the cwm one as well as the KK rom (beanstalk in your case) on ur phones internal sdcard.
then reboot to philz recovery and first flash the CWM zip and then again reboot back to recovery.
Do all the wipes using the latest CWM recovery as per the install instruction on the Bean stalk thread and flash the rom.
Click to expand...
Click to collapse
Thank you very much! You are awesome. Beanstalk is now running on my phone. Last question: I installed the rom but not gapps, can install gapps later without the wipes?
Click to expand...
Click to collapse
samzelf said:
Sun90 said:
Thank you very much! You are awesome. Beanstalk is now running on my phone. Last question: I installed the rom but not gapps, can install gapps later without the wipes?
Click to expand...
Click to collapse
Yes, U can install the same later without any wipes
Enjoy the Rom for now
Click to expand...
Click to collapse
Sun90 said:
samzelf said:
Yes, U can install the same later without any wipes
Enjoy the Rom for now
Click to expand...
Click to collapse
Thank you, awesome rom.
I got a error message when flashing the Gapps: insufficient storage space available in system partition gapps
And later status 7
Could you help me for the last time?
Click to expand...
Click to collapse
samzelf said:
Sun90 said:
Thank you, awesome rom.
I got a error message when flashing the Gapps: insufficient storage space available in system partition gapps
And later status 7
Could you help me for the last time?
Click to expand...
Click to collapse
Try installing a slim/micro/mini gapps package. The gapps package you are trying to flash requires more space as there are more apps associated to it. The packages I mentioned has only the essential gapps for your system. You can search for them on xda.
Click to expand...
Click to collapse
banjara said:
samzelf said:
Try installing a slim/micro/mini gapps package. The gapps package you are trying to flash requires more space as there are more apps associated to it. The packages I mentioned has only the essential gapps for your system. You can search for them on xda.
Click to expand...
Click to collapse
Thanks for helping, I used the micro gapps package.
Click to expand...
Click to collapse
Hi guys
I read about the model GT-S5839i is the same as GT-S5830i is true ?
Is possible change android to version 4.4.4 ? or bether then 2.3.6 ?
I try this procedure :
http://forum.xda-developers.com/galaxy-ace/s5830i-general/cm11-cooperve5830i-thread-cynogenmod-11-t2808268
but writing me this rom is for GT-S5830i and you have GT-S5839i
Than you for answer.
I think yes it will work in s5839i also
amolgosavi said:
I think yes it will work in s5839i also
Click to expand...
Click to collapse
How I change android ? any instruction or link ?
Go to that thread and follow instruction
I try this procedure :
http://forum.xda-developers.com/galaxy-ace/s5830i-general/cm11-cooperve5830i-thread-cynogenmod-11-t2808268
but writing me this rom is for GT-S5830i and you have GT-S5839i
I use CLOCKWORKMOD RECOVERY 6.0.1.2.
Please help ?
PS 5 hours i read and try find solution in XDA
DelBossco said:
I try this procedure :
http://forum.xda-developers.com/gal...1-cooperve5830i-thread-cynogenmod-11-t2808268
but writing me this rom is for GT-S5830i and you have GT-S5839i
I use CLOCKWORKMOD RECOVERY 6.0.1.2.
Please help ?
PS 5 hours i read and try find solution in XDA
Click to expand...
Click to collapse
I have a s5839i and cm11 is working fine. Replace s5839i to s5830i in build.prop or just flash cm7 then cm11
Also wrong section, please post in question&answer next time.
Cakawuete said:
I have a s5839i and cm11 is working fine. Replace s5839i to s5830i in build.prop or just flash cm7 then cm11
Also wrong section, please post in question&answer next time.
Click to expand...
Click to collapse
How i replace s5839i to s5830i in build.prop ?
For you is noob question but i need detailed description:
thank you so much
PS Sorry for wrong section ...
CLOCKWORKMOD RECOVERY 6.0.1.2 writing error message : "This package is for "cooperve,GT-S5830i,gt-s5830i" devices; this is a "GT-S5839i""
Edit file system\build.prop in zip file ? and change GT-S5830i to GT-S5839i ?
ro.product.model=GT-S5839i same result "This package is for "cooperve,GT-S5830i,gt-s5830i" devices; this is a "GT-S5839i""
I use this file cm-11-20140725-NIGHTLY-cooperve.zip
DelBossco said:
ro.product.model=GT-S5839i same result "This package is for "cooperve,GT-S5830i,gt-s5830i" devices; this is a "GT-S5839i""
I use this file cm-11-20140725-NIGHTLY-cooperve.zip
Click to expand...
Click to collapse
First flash any cm7 rom..u have to make ext4 system for that use multiformater then choose ext4..then flash biel cm7 kernel and then any cm7 rom..then boot..after that go to cwm and flash cm11 kernel and then reboot to recovery and then wipe everything and flash cm11..and use 19-07-2014 cm11 rom..
amolgosavi said:
First flash any cm7 rom..u have to make ext4 system for that use multiformater then choose ext4..then flash biel cm7 kernel and then any cm7 rom..then boot..after that go to cwm and flash cm11 kernel and then reboot to recovery and then wipe everything and flash cm11..and use 19-07-2014 cm11 rom..
Click to expand...
Click to collapse
Why use 19-07 ? The last (25-07) works better.
You can find cm7 here and cm7 specific kernel here. Flashing instructions are rovided in these threads.
Then flash cm11 kernel, reboot recovery (make sure it's 6.0.x.x version), mount /system and flash cm11 which you can find here.
Cakawuete said:
Why use 19-07 ? The last (25-07) works better.
You can find cm7 here and cm7 specific kernel here. Flashing instructions are rovided in these threads.
Then flash cm11 kernel, reboot recovery (make sure it's 6.0.x.x version), mount /system and flash cm11 which you can find here.
Click to expand...
Click to collapse
Becouse 25-07 build is mtd build..