I did a misstake and wipe the whole memory on my 7500 3G
Now I only got the recovery CWM-based v6.0.3.6 that I can acces to, are there any way to connect the tab to my computer and mount the memory from the recovery and paste in the rom zip file and then install it?
Or are there any ohter way?
Try flashing a rom via download mode/odin when flashed, u can now paste files. Then go to recovery, wipe system, cache, dalvik but do not factory reset or else data will be deleted. Flash that backup now. That the only way i know
Greencrow said:
Try flashing a rom via download mode/odin when flashed, u can now paste files. Then go to recovery, wipe system, cache, dalvik but do not factory reset or else data will be deleted. Flash that backup now. That the only way i know
Click to expand...
Click to collapse
Where do I find download mode?
Greencrow said:
Try flashing a rom via download mode/odin when flashed, u can now paste files. Then go to recovery, wipe system, cache, dalvik but do not factory reset or else data will be deleted. Flash that backup now. That the only way i know
Click to expand...
Click to collapse
Any guide?
On your way to recovery mode, there's another icon. That's download mode.
Related
what happens if you wipe data / factory rest , wipe cache, and wipe dalvic without doing a backup?? i have access to recovery but my phone doesnt go pass the tmobile screen. can g=it be fixed or is it bricked now?
jmoney86 said:
what happens if you wipe data / factory rest , wipe cache, and wipe dalvic without doing a backup?? i have access to recovery but my phone doesnt go pass the tmobile screen. can g=it be fixed or is it bricked now?
Click to expand...
Click to collapse
You delete system files in phone what won't boot up without it..only your suggestion is copy on sd card some custom rom and then flash it..if you would like to have official then use KDZ..
download miks cm7 6.5.7 put it into yours sd card then follow the steps below
1] reebot into recovery
2] wipe all data, dalvik cache, factory reset data.
3] format system data
4] press on install zip from sd card
5] choose zip file
6] choose miks 6.5.7
7] let it flash will take about 4-5 mins
8] reebot system now it will work
this will work on cmw recovery and twrp recovery dont know about amonra recovery.
NOTE:if u can access your recovery your phone is not bricked.
Ok so i've tried to install a rom (Touwiz4), and i've tried to follow the steps, and as dumb as i am, i've used the update.zip method (by renaming the file to update). It installed, but everytime i turn the phone on, it is stuck on the samsung logo, please help me
Also: i can get into download mode and the Home+Power menu
Please help me, i don't know what to do if i lose my phone
this can always happen this is why you have to take backups...
What is your phone?
You can search around for stock roms or try to install another custom rom.
here are some locations where you can find stock roms:
http://andwise.net/?p=199
ok it's simple:
Recovery
Wipe data
Wipe Chace
Wipe devilchace
Reinstall rom
enjoy... ^_^
andwise said:
this can always happen this is why you have to take backups...
What is your phone?
You can search around for stock roms or try to install another custom rom.
here are some locations where you can find stock roms:
Click to expand...
Click to collapse
And if i get a rom (official or custom), should i use the apply update.zip option? Or there is another way?
ubas90 said:
ok it's simple:
Recovery
Wipe data
Wipe Chace
Wipe devilchace
Reinstall rom
enjoy... ^_^
Click to expand...
Click to collapse
how to wipe devilcache?
go to recovery mode choose wipe data, wipe cache partition, then go to advance, choose wipe dalvikcache, then reboot
sent from my Walkman
chepoz said:
go to recovery mode choose wipe data, wipe cache partition, then go to advance, choose wipe dalvikcache, then reboot
sent from my Walkman
Click to expand...
Click to collapse
I don't have the advance menu
you can use update.zip method (i suppose you just select 'apply /sdcard/update.zip')
or you can select 'choose zip from sdcard' in 'install zip from sdcard menu'
BUT before that, as ubas90 said you have to:
Wipe data
Wipe Chace
Wipe dalvilk cache (which is in the advanced menu)
If you do not have advanced menu it seems that your recovery is not really CWM (check that, it has to be written ClockworkMod somewhere).
You can install CWM following these instructions: http://andwise.net/?p=268
you can always try without wiping dalvilk cache,depending on the previous state it may not be needed.
andwise said:
you can use update.zip method (i suppose you just select 'apply /sdcard/update.zip')
or you can select 'choose zip from sdcard' in 'install zip from sdcard menu'
BUT before that, as ubas90 said you have to:
Wipe data
Wipe Chace
Wipe dalvilk cache (which is in the advanced menu)
If you do not have advanced menu it seems that your recovery is not really CWM (check that, it has to be written ClockworkMod somewhere).
You can install CWM following these instructions:
you can always try without wiping dalvilk cache,depending on the previous state it may not be needed.
Click to expand...
Click to collapse
I'll first try without installing CWM, i just don't need to get in more trouble
Also, what is the key combination for the ace for the bootloader use? When to use the fastboot.exe?
have u last recovery?
look is simple, make 3 wipe, then install zip and reboot
if couldn't make wipe devil cache could find the devil's zip by brainmaster...
ubas90 said:
have u last recovery?
look is simple, make 3 wipe, then install zip and reboot
if couldn't make wipe devil cache could find the devil's zip by brainmaster...
Click to expand...
Click to collapse
Do you happen to have a link?
OMG after i installed another rom the exact same thing happened
It worked! I'm so happy right now
I've used odin, and it was easier than it seemed
Also, thanks everybody for your help, it's greatly appreciated
Assuming my Galaxy Note II phone has been unlocked successfully, if I do a factory reset to upgrade to note2_JellyBeans_B8.zip:
YOU MUST BE UNLOCKED
Step 1-
Wipe Data Factory Reset!
Step 2-
Wipe davlick cache
Step 3-
install zip and pick your options
Step 4-
Reboot and enjoy!
wouldn't this restore the phone back to stock?? Or is it just the bootloader partition that is left alone when you do a factory reset? Also, the instructions were not too clear when it mentions: "install zip and pick your options". Do I unzip the file and pick something in the install folder? A tad confused here...
hugeyeti said:
Assuming my Galaxy Note II phone has been unlocked successfully, if I do a factory reset to upgrade to note2_JellyBeans_B8.zip:
YOU MUST BE UNLOCKED
Step 1-
Wipe Data Factory Reset!
Step 2-
Wipe davlick cache
Step 3-
install zip and pick your options
Step 4-
Reboot and enjoy!
wouldn't this restore the phone back to stock?? Or is it just the bootloader partition that is left alone when you do a factory reset? Also, the instructions were not too clear when it mentions: "install zip and pick your options". Do I unzip the file and pick something in the install folder? A tad confused here...
Click to expand...
Click to collapse
You want to wipe system, factory reset, cache and dalvik cache. Factory reset will wipe data like Google account and apps and such.
Then the ROM installs with aroma which loads up a GUI that let's you choose what you want. Can choose apps installed clock location how many widgets you show at the top what kernel you run etc. Literally flash the zip and you'll understand.
Sent from my SCH-I605 using xda app-developers app
nosympathy said:
You want to wipe system, factory reset, cache and dalvik cache. Factory reset will wipe data like Google account and apps and such.
Then the ROM installs with aroma which loads up a GUI that let's you choose what you want. Can choose apps installed clock location how many widgets you show at the top what kernel you run etc. Literally flash the zip and you'll understand.
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Thanks. I am not sure how to "wipe system", but I read how to factory reset and clear dalvik cache. Also not sure how to load the jellybeans ROM(do I mount it.. is it an .iso? etc.)... lots of reading to do. Ty for the input m8.
hugeyeti said:
Thanks. I am not sure how to "wipe system", but I read how to factory reset and clear dalvik cache. Also not sure how to load the jellybeans ROM(do I mount it.. is it an .iso? etc.)... lots of reading to do. Ty for the input m8.
Click to expand...
Click to collapse
If youre using TWRP click wipe, then factory reset, swipe to do so, then cache same way, then dalvik.
To flash rom click the install tab, find the rom, make sure you tell it to look at the internal or external at the top and find the rom, then swipe to flash it
sidenote: factory reset clears data, which is what most people do. system wipe actually clears out the partition where the rom is, in other words the phone will not reboot until youve flashed a rom to it
hugeyeti said:
Thanks. I am not sure how to "wipe system", but I read how to factory reset and clear dalvik cache. Also not sure how to load the jellybeans ROM(do I mount it.. is it an .iso? etc.)... lots of reading to do. Ty for the input m8.
Click to expand...
Click to collapse
Put the ROM on your phone and go to the install section of your recovery (You must boot into recovery by holding power, home, and volume up while turning on your phone) and flash it from there.
Joshina said:
Put the ROM on your phone and go to the install section of your recovery (You must boot into recovery by holding power, home, and volume up while turning on your phone) and flash it from there.
Click to expand...
Click to collapse
My phone is now unlocked + jailbroken after following instructions from CASUAL. No issues.
When u say put the rom in your phone. U mean my SD card? Per littleguevara's post:
"To flash rom click the install tab, find the rom, make sure you tell it to look at the internal or external at the top and find the rom, then swipe to flash it
sidenote: factory reset clears data, which is what most people do. system wipe actually clears out the partition where the rom is, in other words the phone will not reboot until youve flashed a rom to it" <----- if the phone is wiped then everything is gone so I can't put the jellybeans rom there.
Also from "Originally Posted by nosympathy
You want to wipe system, factory reset, cache and dalvik cache. Factory reset will wipe data like Google account and apps and such"
Will I be able to wipe cache and dalvik cache WHILE in recovery mode? I just want to be as proactive as possible and avoid being reactive to anything that comes my way that I am not aware of. I believe I already have TWRP (i saw their logo while jailbreaking).. Any input is appreciated m8.
Hi!
I rooted my wt19i phone and installed a 5.0.2.7 recovery.
Then I went to recovery and wipe/format everything for the new rom, but the rom wasn't on the SD.
Then I reboot my phone, but I couldn't step in again into the recovery.
What is the problem?
Why can't I go into recovery?
Pls, help!
ps: sorry for my english, I'm hungarian
Tonchi said:
Hi!
I rooted my wt19i phone and installed a 5.0.2.7 recovery.
Then I went to recovery and wipe/format everything for the new rom, but the rom wasn't on the SD.
Then I reboot my phone, but I couldn't step in again into the recovery.
What is the problem?
Why can't I go into recovery?
Pls, help!
ps: sorry for my english, I'm hungarian
Click to expand...
Click to collapse
That's because maybe you click in the option format sd card. When you install a new rom, just wipe cache, wipe dalvik & if in the thread rom said that you need to wipe data, you must wipe it. Not format anything.
mauam said:
That's because maybe you click in the option format sd card. When you install a new rom, just wipe cache, wipe dalvik & if in the thread rom said that you need to wipe data, you must wipe it. Not format anything.
Click to expand...
Click to collapse
So, in the mount and storage menu doesn't have to format, okay.
Woth flashtool, i put on my phone a 4.0.2.A.0.58 rom.
So, i think, i'm fine
THX!
I think You have locked bootloader, so when You wipe everything, doesn't install new ROM and reboot device - You have also wiped recovery That's why You wasn't able to boot into it : )
Bolussimo said:
I think You have locked bootloader, so when You wipe everything, doesn't install new ROM and reboot device - You have also wiped recovery That's why You wasn't able to boot into it : )
Click to expand...
Click to collapse
That's right. If you haven't flashed a kernel with a recovery mode installing a recovery by any other method installs it to the system partition.
you can find a flashable zip for cwm recovery in themes and apps section. remember to flash it whenever you change your rom before exiting recovery mode.
I know the basics of flashing and I've done it before to unbrick this very same phone (SGS2 SGH-I777) however since then the USB port broke and I cannot update to 4.1.2 without using Mobile Odin. I have purchased the Pro Version and have the flash kernel auto installed so I have the following questions.
- Do I flash the file in .zip or not?
- When I unzip there are 2 files. One of them to flash and the other SS_DL.dll. Do I flash this?
- I plan to clear dalvik cache and data to ensure success.
- I do NOT have CWM Recovery/any other recovery. My phone is completely stock other than being rooted. Can I still flash as this?
- This is a STOCK and OFFICIAL Firmware.
These questions may seem silly but I want to ensure I don't brick my device as if I lose this phone I'm stuck with a Samsung Flight in the meantime. Thanks in advance.
Edit: No data partition was added but everything else was. Is that ok?
http://imgur.com/kPHza4o
imgur link because uploading is messed up via S2
I just put the .tar firmware file on my sdcard and then open Mobile Odin Pro and select "Open file..." and navigate to the .tar firmware file and then select it and Mobile Odin will set the partitions for u. All u have to do is tap OK.
Your image looks like Mobile Odin Pro is loaded correctly. U don't flash the.dll file.
U can now select (if u want) Enable EverRoot, Inject SuperSU, Inject Mobile Odin. Wipe data and cache and Wipe Dalvik cache, i would recommend to select also.
Then Flash firmware.
And if u wanna get that micro usb port fixed/replaced, contact mobiletechvideos.com
HeatSeekerism said:
- Do I flash the file in .zip or not?
Click to expand...
Click to collapse
You flash the .tar.md5 file.
- When I unzip there are 2 files. One of them to flash and the other SS_DL.dll. Do I flash this?
Click to expand...
Click to collapse
Ignore SS_DL.dll
- I plan to clear dalvik cache and data to ensure success.
Click to expand...
Click to collapse
Yes. Also, before flashing, enter the stock 3e recovery and perform a wipe data/factory reset. And then in Mobile Odin, check both Wipe data and cache and wipe dalvik cache
- I do NOT have CWM Recovery/any other recovery. My phone is completely stock other than being rooted. Can I still flash as this?
Click to expand...
Click to collapse
Yes.
- This is a STOCK and OFFICIAL Firmware.
Click to expand...
Click to collapse
Yes.
Edit: No data partition was added but everything else was. Is that ok?
Click to expand...
Click to collapse
Yes.
creepyncrawly said:
You flash the .tar.md5 file.
Ignore SS_DL.dll
Yes. Also, before flashing, enter the stock 3e recovery and perform a wipe data/factory reset. And then in Mobile Odin, check both Wipe data and cache and wipe dalvik cache
Yes.
Yes.
Yes.
Click to expand...
Click to collapse
Alright. Wish me luck. Once my battery is fully charged I'll flash. I'll let you know how it goes.
:salute: