Hi people
Since I'm part of the lucky people owning a Huawei Ascend Mate 7 (MT7-TL10), I'm actually looking some accessories like a quick charger.
I wish a charger better than the original one if possible, with EU pins, and with a good quality checked (I prefer to avoid some product with awesome specs but not tested ...)
So anyone have any idea where I can find a good charger, and without any risk for my phone ?
Thanks
WolwX said:
Hi people
Since I'm part of the lucky people owning a Huawei Ascend Mate 7 (MT7-TL10), I'm actually looking some accessories like a quick charger.
I wish a charger better than the original one if possible, with EU pins, and with a good quality checked (I prefer to avoid some product with awesome specs but not tested ...)
So anyone have any idea where I can find a good charger, and without any risk for my phone ?
Thanks
Click to expand...
Click to collapse
for few days i went to jarir book store on KSA . I found Charger good price also 2 USB 5 volt 2.4 Amber ... compatiable with mate 7 and faster from orignal ...
just to know more fasting to charge wil damge your batter of mate 7 quickly .also orignal 2 A will damge
for me I charging with Iphone charge 1A good for batter and Stander and low risk to Device
If you want proper charging, then always use the accessories coming with that product. It is tested for sure and good. Other than that, you can use any charger delivering the same charge. The original charger is 5 volt, 2 Ampere. Don't use anything above 2 amperes as it may damage the device. Below that will charge it slowly.
BTW, why you don't want to use the original charger?
Sent from my Coolpad 9976A using Tapatalk
I use Nexus 6 Turbo charge (made by Motorola) 5v 1.6A it charge full battery in 90 minute.
http://www.motorola.com/us/accessories/power-storage/chargers/motorola-turbo-charger/motorola-turbo-charger-pdp.html
Is it safe for battery life of Mate 7?
I'm using a NTT Docomo Quickcharge 2.0 adapter and It does support it even though is not specified and it's not a qualcomm chip.
Sent from my HUAWEI MT7-L09 using Tapatalk
djmaxi said:
I'm using a NTT Docomo Quickcharge 2.0 adapter and It does support it even though is not specified and it's not a qualcomm chip.
Sent from my HUAWEI MT7-L09 using Tapatalk
Click to expand...
Click to collapse
Can you test it with ampere (free in gplay) i don't think it will charge over 1800mA so that it acts like a normal 2a charger
Fast charging
Using a fast charger will destroy your battery faster. Not recommended as the battery is not removable. You can get a battery and if you are comfortable removing the back and swapping it out then go for it.
Hi,
PoopDonkey said:
Using a fast charger will destroy your battery faster. Not recommended as the battery is not removable. You can get a battery and if you are comfortable removing the back and swapping it out then go for it.
Click to expand...
Click to collapse
that is not correct as you are not connecting the charger to the battery directly. In fact the charger is just a power supply. The actual charger is integrated into the phone (charging controller).
In general you need to know that volts are pushed to the device by the power supply and amps are drawn by the device (phone) from the power supply. Therefor using a power supply with more than 5V will kill your phone but using one with 2A, 3A or even 4A will make no difference as the charging controller will just pull the amps required. Because of that you can not really fast charge a phone by changing the power supply only if the phone supports the fast charge option (for example some Nexus phones).
I tested this myself with a power supply (can provide 5V and 1.5 to 4 amps) and an amp meter. The phone always drew between 1.5 and 1.6 amps (with and empty battery, 8 to 10% left) regardless of the selected amps of the power supply. Using a power supply with less than 1.5A will kill the power supply as the phone tries to draw the 1.5 amps or more. As result the power supply will get hot and eventually die.
Since battery is not removable be careful with fast charging, since it will decrease the life span of the battery and in the end it will just give you less battery performance.. it is stupid... however.. there is situations where it can be really needed though but not on a regular basis..
Last weekend I would really had needed fast charging.. It forced me to spend about 3 hours on a cafee so I could make it 100% so I did know I did survive the day with gps and all other things.. However in these situations I really like the ultra power saving mode..it saved me that night.. when I was lost in stockholm.. and my phone was really the only way to get contact with people
blackinfinity said:
Since battery is not removable be careful with fast charging, since it will decrease the life span of the battery and in the end it will just give you less battery performance.. it is stupid... however.. there is situations where it can be really needed though but not on a regular basis..
Last weekend I would really had needed fast charging.. It forced me to spend about 3 hours on a cafee so I could make it 100% so I did know I did survive the day with gps and all other things.. However in these situations I really like the ultra power saving mode..it saved me that night.. when I was lost in stockholm.. and my phone was really the only way to get contact with people
Click to expand...
Click to collapse
Why don't you buy a powerbank? I can advice you the xiaomi 16000mah. That one charges fast and you can be mobile.
Any recommendations?
I wonder if a S6 charger do the trick. Stock charger is too slow damn. Spending 3 hours to have a full charge is not acceptable for me.
I'm going to be honest, it doesn't really matter how you charge your phone as long as you don't go over 5v and 2 Amps. Batteries will automatically lose cells from charge cycles and by the time you feel the effects of the battery going bad, you would have already moved on to the next device for the next person to worry about. And saying to use the Stock Charger isn't really good enough as the Stock charger doesn't serve as a Car charger also. If you want to charge your phone quick, and you already have a 2 Amp charger, Check your microUSB cable. Don't use junk cables, buy quality or use the cable you received with the device. You get what you pay for. Fast Charging won't work as the Charger has a chip inside that communicates with the Phone and Device. Also, when buying a charger, don't just randomly buy a charger online, Make sure its UL Tested. Even if it says UL tested, there should be a test number on that UL Label, take it a step further and google it and make sure it matches the charger specs and passes as knockoff chargers are notorious for copying other chargers Regulatory icons to make it seem authentic. You don't want to buy a junk charger that ends up burning your house down or gives you a very bad 120 Volt shock through the microUSB cable that would also kill and fry your phone.
treem said:
I use Nexus 6 Turbo charge (made by Motorola) 5v 1.6A it charge full battery in 90 minute.
http://www.motorola.com/us/accessories/power-storage/chargers/motorola-turbo-charger/motorola-turbo-charger-pdp.html
Click to expand...
Click to collapse
1.6A is nothing.. i use 2.0A and it still chrges 3 hours
one friend conected his phone to a hi suite, he went to repair sistem or something like that, and it pop out an option of QUICK CHARGE... even he doesent know how that hapends, now his phone charges faster. he is on b331 rom
cyvr1 said:
Hi,
that is not correct as you are not connecting the charger to the battery directly. In fact the charger is just a power supply. The actual charger is integrated into the phone (charging controller).
In general you need to know that volts are pushed to the device by the power supply and amps are drawn by the device (phone) from the power supply. Therefor using a power supply with more than 5V will kill your phone but using one with 2A, 3A or even 4A will make no difference as the charging controller will just pull the amps required. Because of that you can not really fast charge a phone by changing the power supply only if the phone supports the fast charge option (for example some Nexus phones).
I tested this myself with a power supply (can provide 5V and 1.5 to 4 amps) and an amp meter. The phone always drew between 1.5 and 1.6 amps (with and empty battery, 8 to 10% left) regardless of the selected amps of the power supply. Using a power supply with less than 1.5A will kill the power supply as the phone tries to draw the 1.5 amps or more. As result the power supply will get hot and eventually die.
Click to expand...
Click to collapse
so much misinformation
this post is the only one who gets it right.
Kalemucu said:
Any recommendations?
I wonder if a S6 charger do the trick. Stock charger is too slow damn. Spending 3 hours to have a full charge is not acceptable for me.
Click to expand...
Click to collapse
You have not read my earlier post or you did not understand it. Changing the charger on the Mate 7 will have NO effect (zero, nada) on the time required to charge your phone except the charger delivers less then appr. 1.6A. Then it would take longer and evetually kill the charger. The Mate 7 uses a Kirin chip which has no fastcharge implemented. Samsung uses Qualcomm Chips with implemented fastcharge technology. The charger (in fact a power supply) and the phone/CPU/charge controller need to communicate with each other, otherwise fastcharge will not be activated (the reason fastcharge with charge-only cables does not work because they lack the required data cables for communication).
I'm going to be honest, it doesn't really matter how you charge your phone as long as you don't go over 5v and 2 Amps.
Click to expand...
Click to collapse
Wrong. Correct would be "I'm going to be honest, it doesn't really matter how you charge your phone as long as you don't go over 5v." The amps of the charger don't matter at all -> amps are PULLED by the phone not pushed to the phone. You could use a charger with 100 or 1000 amps and it would not hurt your phone a bit as long as it is only charged with 5 Volts.
More amps (>1.6A) on the charger do not improve the time for charging one second.
1.6A is nothing. i use 2.0A and it still chrges 3 hours.
Click to expand...
Click to collapse
Yes, and that won't change one bit even if you use the best and most expensive charger and a 1000$ cable. The Mate 7 is limited by its hardware (built in charge controller) and pulls max 1.6A. End of story.
As long as you don't understand how charging works you will spend 100's of bucks for cables and chargers to no avail.
The only reason, why charging with some charges is quicker than with others is that those chargers actually deliver the amps they are supposed to deliver. There are a lot of cheap/bad chargers out there which are labelled with 5V/2A but only deliver a fraction of the amps. You can identify those chargers easily because they get extremly hot. I use a 2A charger from Aukey which gets only lukeworm.
Related
I'm looking for an external battery charger (preferably solar powered) for taking my Note on backpacking trips. Unfortunately, most of the solar packs that I've found have only .5 - .7 amps available for USB output. If I'm using a 1amp charging cable (with the data leads shorted), will .7 amps kick in the AC charging speed? Is .5 amps enough to charge the phone while I sleep for 7 hours?
I suppose it depends on how long you are out without power but another alternative is an external battery that allows you to charge your phone by plugging it into the external battery.
This one here (at $75 USD) will let you charge the Note from completely dead to a full complete charge 4.4 times.
http://www.amazon.com/New-Trent-IMP...Z64Q/ref=sr_1_2?ie=UTF8&qid=1336084828&sr=8-2
So, if you started your backpacking with a full charge on both the phone and the battery pack, and assuming you charge the phone every night at say 20% battery left, you should get 6 days. If you need more than that, you can just buy a second battery pack (personally, Id want to have two just in case).
That's a good suggestion from littlewierdo. I would also have at least 2 spare batteries for the note. I don't think that .5 amps is enough.
Budge said:
I'm looking for an external battery charger (preferably solar powered) for taking my Note on backpacking trips. Unfortunately, most of the solar packs that I've found have only .5 - .7 amps available for USB output. If I'm using a 1amp charging cable (with the data leads shorted), will .7 amps kick in the AC charging speed? Is .5 amps enough to charge the phone while I sleep for 7 hours?
Click to expand...
Click to collapse
Budge I had an HTC evo 4g and got a 5400mah battery. This worked ok. However the output is .5a which will not charge the note if you are using maps with gps or bluetooth or playing tunes. It wil charge when not using those. Say at night when you are asleep. I think you would have to find a battery with output better than 1a to actually charge when you are actively using your phone. I am not sure of the actual output you would need. I will research it though for my own needs. I do use my note on my motorcyle with a charger which outputs .5a and this is nowhere near what is needed to use google maps and bluetooth and play tunes.
I am actively looking for a solution which will charge my note while using google maps, bluetooth, and playing tunes etc. I may have found a solution with a usb y cable which is connected a 2a source and a .5a source on my motorcycle.
The only solution for backpacking may be to charge when not using the note. I am fairly sure it will charge at .5a when sleeping.
Good luck.
kimtyson said:
That's a good suggestion from littlewierdo. I would also have at least 2 spare batteries for the note. I don't think that .5 amps is enough.
Click to expand...
Click to collapse
imesg said:
I am actively looking for a solution which will charge my note while using google maps, bluetooth, and playing tunes etc. I may have found a solution with a usb y cable which is connected a 2a source and a .5a source on my motorcycle.
Click to expand...
Click to collapse
Im not sure where you got the .5 amps from, it outputs 1 amp, so it will charge the Note with the screen on. However, it wont charge quite as fast as the wall charger will it will actually charge the phone.
It should be able to handle keeping the screen on, bluetooth doesnt use much power at all so playing music shouldnt be an issue and gps uses very little battery as well. I dont see an issue with it.
Admittedly, I dont have one of these, dont really have much of a use for one at the moment but I cant possibly see any issues with this.
HOWEVER, there are alternative external battery packs that are MUCH cheaper with less mah capacity (meaning, in simple speak, you would get less power storage meaning that you wouldnt be able to charge your phone as many times as you might like). There are other USB battery packs that might also have less power output (or more) which might mean that you wouldnt be able to keep the screen on AND charge the phone.
Truth be told, I only looked for the highest capacity battery pack given what your situation was AND I tend to buy higher end if the price makes sense. In the case of battery packs similar to this design (external usb battery packs), they generally start at $30 and go to about $80 so buying the best possible makes sense. However, if the highest/best possible was $200, Id probably get something cheaper, but since its only ~$80, if I were in your shoes, that would be my choice.
Id probably consider getting two of them (that is, if we are talking about longer than 1 week excursions, if under a week, just get 1) and a decently long usb cable (3-4 ft) but not too long (you dont want to be tripping over the cable but you need it long enough that if you need to, you can charge the phone mid-day while hiking).
You dont need multiple batteries for the Note, the whole point of this external battery pack is to eliminate the need for them.
littlewierdo said:
Im not sure where you got the .5 amps from, it outputs 1 amp, so it will charge the Note with the screen on. However, it wont charge quite as fast as the wall charger will it will actually charge the phone.
Click to expand...
Click to collapse
littlewierdo I was not necessarily speaking of the device you suggested but one I had. I was warning Budge to be careful and not get a device which outputs only .5a. I was suggesting that he find one which will put out 2a if such exists. The device which you suggested will put out 1a. However I don't believe this would be enough for my purposes and maybe no Budge's either. i was not refering to your device or you. Not my intent to get in an argument with you but to help Budge find a suitable solution.
link to imp1000 manual:
http://www.google.com/url?sa=t&rct=...sg=AFQjCNFPt8XfUpeSr8olPnKLYCivrRvqFg&cad=rja
Couldn't make the link post as a link. Do a search for 'imp1000 manual'.
Ciao
Littlewierdo- I didn't disagree with your suggestion to use another battery pack to charge the existing battery. In fact, I have one and use that option myself. I was adding that it may be a good idea to have a spare. I was responding to the OP who mentioned .5 amps. I assume that's where imesg was coming from, too.
Hi all,
When I use the charger that came with the HTC One my phone charges great, rapid.
But when I use any other charger that I have in my home/office it charges very slow. Even with a 2.1 amp charger!
The charger that comes with the phone has an output of 1 amp.
I've tried multiple other chargers (1 amp and 2.1 amp) and they all trickle charge.
Anyone else noticing this?
Thanks
Joe
I'm using old charges at home and in the office and it did seems slow but had not heard of rapid charge. Will the phone indicate this rapid charge mode? If not, is it real?
I'm getting slow charging even on the stock HTC charger. Not sure how I can enable this rapid charge cause 4+ hours from 0-1% to full is a bit ridiculous.
use orginal charger is best , maybe it has some relationship with your battery life
If anyone is coming from phones with smaller batteries, remember the larger the capacity the long it takes to charge.
I use the cable and charger from my Nexus 7 and it charges fast. Off my USB it is slow.
Real AC chargers have two pins shorted. You can hack a USB to micro USB cable and short the same two pins to enable AC charging with any adapter, wall, USB, or car. Should be pins 3+4, but don't hold me to that.
Sent from my HTC One using xda app-developers app
flooty333 said:
Hi all,
When I use the charger that came with the HTC One my phone charges great, rapid.
But when I use any other charger that I have in my home/office it charges very slow. Even with a 2.1 amp charger!
The charger that comes with the phone has an output of 1 amp.
I've tried multiple other chargers (1 amp and 2.1 amp) and they all trickle charge.
Anyone else noticing this?
Thanks
Joe
Click to expand...
Click to collapse
Try to change your phone
c5satellite2 said:
Real AC chargers have two pins shorted. You can hack a USB to micro USB cable and short the same two pins to enable AC charging with any adapter, wall, USB, or car. Should be pins 3+4, but don't hold me to that.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
i've done exactly this, and damned if the One still refuses to draw more than ~500 ma off of anything but the 2.1 A wallwart it came with (i don't have any others to try with). i'm about to dig out an old inverter to see if that will actually work. wish i'd paid more attention to my EE dad when i lived at home; i've gotten a serious crash course in this stuff while trying to get my One to charge in my car, when it's on.
edit: so i got my old inverter out, and spent about 15 minutes testing. i used the 2.0A adapter that came with my Nexus 7 to test, as well as the 3.1A Mediabridge adapter i got here. my phone was at about 45% when i started testing. unplugged, Battery Monitor Widget reported a drain of anywhere between 500ma and 650ma (running Ingress, wifi on). plugged in to the Mediabridge adapter showed, at best, a drain of 50ma. the Nexus adapter plugged in to my inverter charged at a fairly consistent ~120ma. i didn't touch my phone the entire time.
i left my Nexus 7 at work so i can't use it to repeat the test, but i will do so tomorrow. the cable i'm using is this one. i'm not crazy about having a ridiculous DC-AC inverter in my car for my phone, but if that's what i have to do so it can be used and not drain, then so be it. admittedly, i don't really understand these things enough to explain these variations, but i plan on learning ASAP. perhaps somebody else can shed some light on why the device charges different, and how it identifies an AC-USB adapter vs a DC-USB adapter.
sluflyer06 said:
If anyone is coming from phones with smaller batteries, remember the larger the capacity the long it takes to charge.
Click to expand...
Click to collapse
Math doesn't support what is happening though. Phone has a 2300mAh battery. The OEM charger outputs 1A (1000mAh)
At most, it should be around 3 hours for full charge, when in fact it is closer to 4-4.5 hours. It's the last 10% that is the issue, it will trickle charge to 100% rather than rapid charge.
nest75068 said:
Math doesn't support what is happening though. Phone has a 2300mAh battery. The OEM charger outputs 1A (1000mAh)
At most, it should be around 3 hours for full charge, when in fact it is closer to 4-4.5 hours. It's the last 10% that is the issue, it will trickle charge to 100% rather than rapid charge.
Click to expand...
Click to collapse
Yes, I think that's exactly what the HTC does... I read a pretty good article recently about Li-Ion batteries that talks about how trickle charging is the best for battery life, and it wouldn't surprise me if HTC got a little aggressive the way the this phone charges since we can't swap the battery ourselves.
I'm trying one last car charger, which matches the wattage of my Nexus 7's 5Vdc/2A AC adapter (which I've had the best luck with, when charging the phone while in use): http://www.amazon.com/gp/product/B009TBF7IG/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
If that doesn't work, I'm going to put a 300W inverter in my car with the AC adapters themselves and stop buying stinking DC adapters. This phone clearly pays very close attention to the wattage available from whatever it's plugged in to.
veener79 said:
I use the cable and charger from my Nexus 7 and it charges fast. Off my USB it is slow.
Click to expand...
Click to collapse
Same here, 2a Nexus 7 brick with a long Logitech USB cable, much faster than stock (and longer)
Harbinger1080 said:
Yes, I think that's exactly what the HTC does... I read a pretty good article recently about Li-Ion batteries that talks about how trickle charging is the best for battery life, and it wouldn't surprise me if HTC got a little aggressive the way the this phone charges since we can't swap the battery ourselves.
I'm trying one last car charger, which matches the wattage of my Nexus 7's 5Vdc/2A AC adapter (which I've had the best luck with, when charging the phone while in use): http://www.amazon.com/gp/product/B009TBF7IG/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
If that doesn't work, I'm going to put a 300W inverter in my car with the AC adapters themselves and stop buying stinking DC adapters. This phone clearly pays very close attention to the wattage available from whatever it's plugged in to.
Click to expand...
Click to collapse
I'm fortunate my car has a built in inverter that I use for charging my phone.
nest75068 said:
I'm fortunate my car has a built in inverter that I use for charging my phone.
Click to expand...
Click to collapse
My next car will too, because I can only imagine that power requirements for these devices is going to increase.
That said, I think I have a winner, and instead of retyping my posts, I'll just link to that thread instead: http://forum.xda-developers.com/showpost.php?p=41797839&postcount=6
Since the snap Dragon 600 has fast charging capabilities, why didn't HTC Include it in the kernel??? I've noticed my 2500 mAh note battery charges faster than my 2300 MAH HTC one
Sent from the Sexiest Android Device (HTC One)
The Xperia Tablet Z is a notoriously slow charger and won't charge over USB (from what I've heard, I don't have mine yet). Does anyone know of a portable charger or power pack that'll work with it?
Ideally one available in Europe.
Cheers.
Sent from my GT-N7100 using xda app-developers app
Morti said:
The Xperia Tablet Z ... won't charge over USB (from what I've heard, I don't have mine yet).
Click to expand...
Click to collapse
The Xperia Tablet Z is supplied with a charger that connects to its USB port; so, the XTZ will charge via its USB port.
If you attempt to charge the tablet via a computer's USB port, that port must be capable of supplying enough charging amperes, otherwise, the tablet will not charge. Standard USB 2.0 ports supply up to 500 mA and standard USB 3.0 ports supply up 900 mA, neither of which is truly enough amperes to charge the tablet. USB ports on computers that are specifically designed for charging devices usually supply 1500 mA (1.5 A) or more. Some manufacturers mark these types of USB ports with a lightening bolt symbol.
As for portable chargers, I have not used any except for chargers that fit in my automobile's power plug (cigarette lighter plug).
Morti said:
The Xperia Tablet Z is a notoriously slow charger and won't charge over USB (from what I've heard, I don't have mine yet). Does anyone know of a portable charger or power pack that'll work with it?
Ideally one available in Europe.
Cheers.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Any halfway recent (read: last 5 years) USB charger will work with it. Be it the one Sony supplies with the tablet, an iPad charger...or one for the Galaxy Note 2.
USB chargers are standardized, you need a "special" one nowadays about as much as you need a "special" socket for a device with a power plug.
The only difference is that we have weaker and stronger chargers, but this does not limit their usability. If you use a weak charger your device will charge slower, if you use a charger with an higher maximum power as your device needs it will expl nothing bad will happen either, it won't take more from the charger than it can handle.
Personally I bought (since I need the original 1.5A charger for the dock) a 2A Samsung charger for travelling. I think it is the same as the Galaxy Note 2 uses, which you already have.
Oh, and it charges with the 2A one over USB also around 30% faster than with Sonys 1.5A.
Psykhe said:
Any halfway recent (read: last 5 years) USB charger will work with it. Be it the one Sony supplies with the tablet, an iPad charger...or one for the Galaxy Note 2.
Click to expand...
Click to collapse
Maybe I'm not being clear.
Portable power supply. With a battery. One that puts out enough power to actually use the XTZ while it's charging, even if doing so only keeps the battery the same rather than actually charging it.
Can anyone recommend anything?
I know it uses a standard micro USB connector to charge but I've heard it won't charge from most PCs as they don't put out enough power. My understanding of many portable chargers is that they also don't put out a great deal of power unless specifically designed for laptops and the like. I don't know if the tablet's needs are quite that, but I'm looking for anyone who has experience using a battery pack with it and if anyone has any recommendations.
Or am I being silly and it'll work with anything capable of charging any tablet?
Thanks.
Morti said:
Or am I being silly and it'll work with anything capable of charging any tablet?
Click to expand...
Click to collapse
It should. The XTZs battery isn't exactly high capacity as tablets go. The Nexus 10 has a 50% bigger one and the iPad3/4 one is almost twice as large.
The principle of power packs is in the end identical as that of basic USB chargers, even a 500mA one will charge the XTZ, but it will take around 15 hours for that (and around 24+ hours to charge an iPad). It isn't a question of "working", but of "working how fast". But, as said, the XDZ hasn't exactly an huge battery, so if anything it will charge faster than other Tablets.
Assuming you do not use it, that is. It is quite possible to discharge it as fast a 3A/hour if you use maximum screen brightness and CPU intensive tasks. But you can discharge other Tablets faster than you can charge them as well.
So what to use - same principle as with USB chargers, pick any. It does not matter if its power comes from a power plug or batteries. If ti works for one USB device it will work for all. What matters is it's maximum A output. One with 2A should be able to charge the XTZ in 4.5 hours, one with 1.5A in 6 hours, and so on...
Psykhe said:
So what to use - same principle as with USB chargers, pick any. It does not matter if its power comes from a power plug or batteries. If ti works for one USB device it will work for all. What matters is it's maximum A output. One with 2A should be able to charge the XTZ in 4.5 hours, one with 1.5A in 6 hours, and so on...
Click to expand...
Click to collapse
Yeah, I'm looking for something that charges the XTZ faster than (or as fast as) it discharges.
Morti said:
Yeah, I'm looking for something that charges the XTZ faster than (or as fast as) it discharges.
Click to expand...
Click to collapse
The Sony CPF2LS USB Portable Power Supply with 7000 mAh Battery charges at 1.5 amps so it should work for you. I'd post a link to Amazon, but, alas, I can't. It's around 63 bucks.
Regards,
John Francis
Morti said:
The Xperia Tablet Z is a notoriously slow charger and won't charge over USB (from what I've heard, I don't have mine yet). Does anyone know of a portable charger or power pack that'll work with it?
Ideally one available in Europe.
Cheers.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
There is a slew of chargers that will charge it. You can use laptop USB, but like mentioned if you use it while charging it will drain
To solve this problem you simply need to have a portable charger that will put out at least 1.5amp(which is what the tablet charges at if im not mistaken).
So plenty are on amazon or ebay which you should have access to in europe
I use powergen ,they work well and is good quailty. Like either of these will workbigger mah will make the charger simply last longer)
http://www.amazon.com/PowerGen-PGMP...=UTF8&qid=1372292278&sr=8-2&keywords=powergen
http://www.amazon.com/PowerGen-PGMP...=UTF8&qid=1372292278&sr=8-3&keywords=powergen
Key thing is to simply look for the amerpage it puts out before you buy, that's how you know if it will charge and use the tablet at the same time. I can sucessfully do both using my car charger(2amp made for iphones) and my Powergen
Morti said:
Yeah, I'm looking for something that charges the XTZ faster than (or as fast as) it discharges.
Click to expand...
Click to collapse
The thing is this entirely depends how you use it. It is quite possible to use it in such a way that you would need a 3A charger to stop it from discharging. I do not think such one exists nor that the battery can accept such a charge.
So AFAIK a charger (be it a power plug or battery one) which stops it from discharging under all kinds of usage scenarios does not exist.
Therefore there is no answer to you "which charger I should use" question, only that the more A a charger puts out, the more usage scenarios will be covered (as in "will charge tablet while using it that way") by it.
Test how fast the Tablet discharges (without charging it) when you use it the way you plan to while using your charger. That will give you an indicator what kind of power you need. I.e. if it takes 12 hours even only a 0.5A charger will work, if it takes 2 hours you would need a 3A charger, which likely doesn't exists.
Im using an innergie charger that gives 2.1 amps and it charges a little faster than the 1.5a that came with it!
---------- Post added at 09:01 PM ---------- Previous post was at 08:53 PM ----------
also i noticed that the quality of the cable has an effect, cheap ones take longer!!
http://www.amazon.com/Portable-Flas...?ie=UTF8&qid=1374806804&sr=8-3&keywords=anker
I'm looking into buying this,hopefully the charging will be somewhat quick as opposed to my current rate. I wonder if there will we a decent charging rate when I use it with this:
http://www.kickstarter.com/projects/david-toledo/the-practical-meter-know-your-power
padooka said:
http://www.amazon.com/Portable-Flas...?ie=UTF8&qid=1374806804&sr=8-3&keywords=anker
I'm looking into buying this,hopefully the charging will be somewhat quick as opposed to my current rate. I wonder if there will we a decent charging rate when I use it with this:
http://www.kickstarter.com/projects/david-toledo/the-practical-meter-know-your-power
Click to expand...
Click to collapse
You know that that charger will only charge around 66% of the XTZs battery, though?
(Effective maximum capacity ~4A (see "attrition factor" explained in 2nd review), XTZs battery: 6A)
I am using my Samsung Note2 charger that states 2A.
Charges alot faster so for people with other chargers I should check samsung chargers haha.
Heya,
I've used the Momox iPowerPro+ on my Xperia Tablet Z and no problems
http://shop.brando.com/Momax-8500mA...2-1A-1A-External-Battery_p08658c0191d003.html
I know there is a thread about what charger to buy, but I have a specs question. Mine z5 came with the International charger and I am in the US. I noted it is 5v and 1.5a. I have a 5v 1a charger on hand. Can I use that?
Sure, it will just take longer to charge.
No lasting negative effects on the battery?
BigHulkDiesel said:
No lasting negative effects on the battery?
Click to expand...
Click to collapse
Most certainly no negative effects. In theory it should actually be better for the battery to charge it with less current, but I don't know if that is true.
Different topic: I read that there are multiple versions of the Z5 (US, Europe, ...) and that they support different LTE frequencies. So maybe you want to check if your mobile connection works as intended, if you don't have the US version.
My phone is showing LTE after choosing my apn settings.
I tried using a 5V 1A charger with my phone and it doesnt seem to work. (It works fine on my old phone) The charge light keeps turning on and off. The vibration pulse you hear when it starts charging keeps pulsing too.
Better use an HIGHER amperage, than lower!! Charger will adapte it to phone specifics...A lower amperage will reduce your battery capacity in long time.
I once connected my Z5C to an old 500mA charger (caught the wrong cable) and kept using it a bit (screen on, etc.) and it gave me a nag screen that said that the charger is not suitable because apparently the battery drain from usage was more than what trickled back in.
However, if left alone even a 500mA charger should eventually charge the phone, taking much longer though.
Generally, with chargers, you need to get the voltage right. If the Amperage is higher that what the OEM charger is it does not matter. The electronics in the device limit the charge to what the device can handle. The Amperage on the charger is the max it can deliver. In other words, the charger does not pump 2.5A into the phone forcefully, the phone just nibbles whatever it can take (say 1,5A).
farfetch said:
Better use an HIGHER amperage, than lower!! Charger will adapte it to phone specifics...A lower amperage will reduce your battery capacity in long time.
Click to expand...
Click to collapse
Any reliable source for that? The charging will be slower - yes, but I seriously doubt, that this has negative long-term effects on the capacity.
dd23 said:
Any reliable source for that? The charging will be slower - yes, but I seriously doubt, that this has negative long-term effects on the capacity.
Click to expand...
Click to collapse
Just try it by yourself for few days
Sent from my E5823 using Tapatalk
I think you need a 2A charger to be sure with the Z5c. Most of my older chargers take hours to charge it, and the car USB port (Nissan Qashqai 2015) barely charges it at all.
The UCH20 that came with the phone, takes 2 hours 15 mins to charge the phone fully. I got a quick charger which takes around 1 hour and 10 mins at max
Wow, really?
It is basic electronics. The voltage must be the exact one. Amperage is what the device draws , therefore the charger must be capable to provide a minimum not a maximum.
I repeat, it is basic electronics!
Now a more pertinent question :
What are the voltages for quick charge ? Does anyone know?
If someone has a original charger with quick charge can you please state what voltages are written on it?
Should be 2 or 3 voltages with lowest 5V
Edit : Found myself the info on Sony UK website of a Sony charger.
[email protected],
[email protected],
[email protected]
farfetch said:
Better use an HIGHER amperage, than lower!! Charger will adapte it to phone specifics...A lower amperage will reduce your battery capacity in long time.
Click to expand...
Click to collapse
I also want a source for that... It's the first time in my life i hear it's the opposite... and i have been charging this phone with 1 amp or 500mA (with pc usb) for the past 4 years, battery is still fine. Only used a 1.5A charger a few times.
On the other hand, my sisters z5 had a swollen battery a year ago, she always used quick chargers...
farfetch said:
Just try it by yourself for few days
Click to expand...
Click to collapse
What do you mean by that?
you are not going to notice battery degradation in just a few days of charging...
EDIT: i only notice now that i accidentally replied to a post from years ago, sorry for that...
Hello all,
I have a really stupid question but it's keeping me awake...
The DashCharge charger, can I use it with other devices? Like a MP3 player? Or another phone? Or is it purely and uniquely proprietary for the OnePlus phones and it might damage the other devices I would use it with?
I know it won't charge faster the devices or... But if I can plug anything with it, then I can drop the other chargers I have and keep only the DC in my bag
Thanx for your replies
Dash power chargers work at 5 Volts 4 Amps which translates to 20 Watts, if I'm not mistaken, Qualcomm's Quick Charge 3.0 works at 6.5 Volts on 3 Amps which means 19.5 Watts of power. The difference in Volts and amps between different chargers is not an issue for most devices for two main reasons.
1. Amperage is pulled by the device, which means that if you have a charger with a 4 Amp capacity, you can pretty much charge any device that draws up to 4 Amps, since no phone that I know of besides the 1+5 and 1+3(t) draws that much, you'll be fine.
2. On the voltage side, most phone chargers (apart from Qualcomm's Quick Charge) usually work at 5 Volts, the same as 1+ Dash chargers. And even if the Voltage rating on the charger is higher than the phone. These type of devices have safety features that reduce the output if they don't recognize the device being charged as compatible with their technology.
So for a quick recap, if the phone you're charging is not compatible with the technology of the charger (1+ Dash, Qualcomm QC for example) the charger will make sure to reduce the amount of power being fed to the device to a safe amount. So normally a non Dash compatible phone will probably charge at no more than 5V 2 or 2.4A.
Thanx a lot for your answer
So I can plug to my DashChargers my MP3 players and lent them sometimes to my colleagues to charge their phones as well, with nothing to worry about. It's good to know
LeKeiser said:
Thanx a lot for your answer
So I can plug to my DashChargers my MP3 players and lent them sometimes to my colleagues to charge their phones as well, with nothing to worry about. It's good to know
Click to expand...
Click to collapse
Yup, it just won't charge at full speed as it would with 1+ devices
You can use it with any device you like, but only OnePlus devices get the fast charge advantage!
Had anyone tried usb c power delivery charge yet?
I've got one for my cheap vernee which works well, in theory it requires negotiation to draw the correct power, but wondered if anyone has tested one yet
and oppo