Related
Alright so here is the premise. I had a good ol time trying to figure out what to download and where to go, what to do, etc, so i thought i would give anyone interested a step by step tutorial (only for you alltel people, vzw can fend for themselves). Please read all the instructions before you do anything, i can jump around a bit sometimes.
Yes, this should enable your GPS and Rev A. No, I will not be responsible if you destroy you phone (although highly unlikely...)
1. download the newest bootloader.
1a. file can be found here
1b. install the bootloader.
1c. this opens up a dos prompt. read it carefully and make sure your phone is already connected when you open the application.
1c. i believe the second time it asks you to "press a key to continue" you need to disconnect your phone and plug it back in. it tells you to do this so just read the directions.
1d. if it reads out that your phone cant be contacted and to check your cable, its probably because you didnt do step 2b.
2. download and install the new radios.
2a. Dont freak, we are going to download a sprint rom.
2b. Download it from here
2c. Run the exe with your phone plugged in.
2d. IMPORTANT: Once the flash is done, the phone will boot up. It will ask you to tap the screen to begin. If you tap, you Fail. Dont tap the screen.
2e. Move to step three.
3. Almost there, now we are getting a good ol' cooked ROM to run on it.
3a. Download DCD's kitchen here. You will also need to download Visual C++ and .Net Framework from here and here
3b. Once downloaded, click on build rom, you will see a bunch of fancy command prompt windows. Just let it sit there for a while. You will see a window come up with a bunch of check boxes. Really click whatever you want. The default selections should be enough to satisfy you. The only thing you need to make sure to do is click on "Alltel" in the carrier screen and click off of "Sprint", the default.
3c. Once you have selected what you want (again I encourage to just use the defaults and maybe add office or entertainment or something), then click the play button at the top. Once the window shows its done loading, click the x to close out of the builder. The command prompt window will start spewing information again at you. Disregard that, its not really vital.
3d. After the command prompt finishes the tizzy it got itself into, the HTC flashing application will automatically launch. Follow through in this window and it will eventually flash you phone. Thats really all you have to do!
Final Thoughts: This guide will also work with any of the other carriers that DCD's new kitchen supports. Thats pretty much everyone because, he is, you know, the man and all. The only thing you have to change is the selection of you carrier when you are "building" your rom. For the specifics of this guide I choose alltel but you can use whatever you want assuming it matches your carrier.
Please write down your Programming information before you do this flash. And its important to know your MSL if you have one of those BS carriers that changes it (unlike alltel). If you need to reprogram your phone, dial ##000000+send and put in your nam information. If you need to still set you A-Key or HDR password (more advanced stuff, the A key allows some sort of authentication and HDR password (located in the security section) allows you to connect to EVDO networks) then you can access the more advanced EPST menu with ##778+send.
Make sure you update with *228 to get the latest PRL or search around online.
Happy Flashing!
Feel free to send me a message if you have any questions or if i left something out
ALSO THANKS TO EVERYONE WHO MADE THIS POSSIBLE AT XDA, GREATEST PHONE SITE IN EXISTENCE
Finally, a step by step for Alltel folks...Thanks. My head was spinning trying to piece together everything from all the various posts.
Terrific write up.
If you can, include where to find the MDN, MSID, and AKEY before upgrading so that these can be re-installed if erased...
Old roms don't work
Nice guide, but you should also note that older roms have a compatibility issue with the new radio upgrade. it seems right now only dcd's cooked rom works; for me at least.
The information you are looking for can be found by using the advanced EPST feature in the phone. assuming you are using a stock dialer (or one that supports codes) inut "##778" and then press call. it will bring up a menue and ask to view or edit. If you are getting your info, of course, press view and if you are replacing info, just click edit. all the info like your mdn and min (which you should know without having to look in here) will be here. clicking the menu on the taskbar will let you choose an entire metric ****ton of info to view. a key is one of them. I noticed now that going back, my akey is not inputted. i dont know what this value is but in the past i think i have seen it as just "0" or blank. I was foolish and didnt write it down before the flash. if anyone has anything diferent in their akey, wanna post it?
update prl
alright so i think i solved the problem with the roaming issue and the EVDO connectivity. and i feel like an idiot. for some reason i just kept on putting off updating the prl since i flashed it. and for another reason i didnt think it would matter. but i have since used the latest prl and updated completely and, wouldntyouknowit, it works perfect. steps?
1. download the newest prl here.
2. bluetooth or copy to your phone
3. open the dialer and press "##775" (this spells prl)
4. enter your unlock code, should be 000000
5. click on update prl, then menu at the bottom then edit
6. browse to where the prl is on your phone (probably my docs if you BTed it)
7. update and restart, voila!
8. enjoy having EVDO and no triangle again! WOOT!
just wondering, after following through all those steps, do we need to relock it?
Also want to note that, this method does indeed work for all providers (alltel, vzw, sprint), it's just the step where you have to flash your rom (DCD's or any other) make sure it is the one with your provider. I made a mistake of downloading the Alltel rom when I'm really a Sprint user :x.
Have any of you folks been able to get OfficeSync to work with this ROM? I can surf the web but am unable to register with my account.
I was hung up in between steps 2 and 3. The screen was stuck on the Alltel screen and I couldn't connect with my pc to install the ROM. I followed other instructions to use a FAT32 formatted SD card with the ROM renamed to TITAIMG.nbh. Reset into bootloader mode by holding the power and camera buttons and hard reset. Run the setup from there... Hope this helps someone else.
Total_Lag said:
just wondering, after following through all those steps, do we need to relock it?
Also want to note that, this method does indeed work for all providers (alltel, vzw, sprint), it's just the step where you have to flash your rom (DCD's or any other) make sure it is the one with your provider. I made a mistake of downloading the Alltel rom when I'm really a Sprint user :x.
Click to expand...
Click to collapse
I never locked my phone and it works fine. So I am guessing no, you dont. And yeah you are correct it should work fine with any of DCD's roms, i just know the alltel one was a success for me, didnt want to lead someone astray. I know the telus one, for example, was bugged at first. idk
This is my first modification to my cell phone...just got it! Is there a setting I check to verify the GPS is working? I just looked around and all I saw were settings for connectiong external GPS devices. Also, when i go to communications manager...there is no setting for GPS. Shouldn't there be a way to turn GPS on and off? Thanks for the help!
Ok....I don't think mine is working because I installed Google Maps and clicked track location and it just stayed at Contacting Satellites (0)...I think I may have messed it up because I installed the SPL first, then the DCD's OS and last the radios...i went back and tried to reinstall everything int he correct order, but now the radio ROM says it's not created for my device.
Is there a way to start over with a fresh install so I can try this again and do it in the correct order this time? Please help! Thanks!
Well im having problems. I installed the new rom via sd card. Everything seemed to go smooth, but when wm starts up and goes through the align screen thing it just restarts and never starts up.
bond00 said:
Ok....I don't think mine is working because I installed Google Maps and clicked track location and it just stayed at Contacting Satellites (0)...I think I may have messed it up because I installed the SPL first, then the DCD's OS and last the radios...i went back and tried to reinstall everything int he correct order, but now the radio ROM says it's not created for my device.
Is there a way to start over with a fresh install so I can try this again and do it in the correct order this time? Please help! Thanks!
Click to expand...
Click to collapse
If you want to start from a blank slate you should be able to install a factory ROM and then begin again from there. It's my understanding that the proper order should be: New SPL --> DCD's ROM --> New Radio
I myself, when following this order, got stuck at the Alltel splash screen after I installed DCD's ROM, but before installing the radio. A reboot with the camera and power buttons held down simultaneously got me into bootloader. From there the ROM installer could recognize the device and proceed with the radio install.
If you click on the data arrow icon at the top, what does it say?
Mine says:
"Alltel Wireless (Dial-up) Connected"
I cant remember before what it said when connected but my download high was 497kps & 97kbps for upload. Either the area I am in doesnt have Rev A (Which I think is the case based upon EVDOMAPS) or my data connection is now hindered...
xweaponx said:
If you click on the data arrow icon at the top, what does it say?
Mine says:
"Alltel Wireless (Dial-up) Connected"
I cant remember before what it said when connected but my download high was 497kps & 97kbps for upload. Either the area I am in doesnt have Rev A (Which I think is the case based upon EVDOMAPS) or my data connection is now hindered...
Click to expand...
Click to collapse
I personally have not been able to reach an EVDO signal at all. in an area where i was always at EVDO, now im mostly shown as roaming and in 1x. I have most recent prl and my SIDs are correct. i think there is a reason this rom is still in beta....
Have you tried the *228, press 3 then *228 then press 2? I had the roaming indicator flashing with 1X until I completed the steps above...
axcess shop
downloaded wm6.1 and it work great but is there a way to get alltels axcess shop back or no thank you
evdo
i am not romeing but i cant get a go evdo ether just 1x i did *228 and still only get 1x any way to fix this thank you
Check my Reply in this Post! The instructions will get your phone locked back onto EVDO. Not sure what your problem is with the roaming, haven't had any problems with that. I would recheck the SID in EPST again!
http://forum.xda-developers.com/showthread.php?t=366068
Ok folks. If you are like me, you searched all over the web didnt find a definitive answer on how to go about getting your HTC rezound to Pageplus.
I bought a used Rezound. It came with NO Verizon SIM card. No software updates to it. I read a lot, sounded like getting to the latest stock was a good idea as it usually fixes issues. Well, I promptly updated to the leaked global ICS rom. Go the rom from android police dated Aug 15.
So my rezound had locked stock global ICS rom, no SIM card. Here is how i flashed it to pageplus. Please follow the steps as mentioned, as i have stumbled too many times and got it working.
================================
Not a must but...
1. Dont upgrade your phone to ICS rom if you dont want to root your phone. As ICS blocks APN updates. Meaning if you need 3g on pageplus or any other carrier and you dont want to root your phone, dont upgrade. If you dont mind rooting your phone, you can just ignore this warning.
Requirements:
MIN and MDN Information:
You can get MIN and MDN by calling pageplus or follow steps below.
goto http://www.kittywireless.com/pageplus/phonestatusform.html
right at the bottom you can enter email and phone number. You will get an email with MIN and MDN information.
OS Requirement:
Windows 7 64bit or 32bit. No support for Linux, Mac or XP(??).
Software you will need:
1. HTC Sync http://www.htc.com/us/support/htc-rezound-verizon/software-updates.
2. HTC Diag drivers. You can download from below.
3. QPST. http://conflipper.com/Software/QPST_2.7_366.rar
4. CDMA Workshop. You need the full version. Demo is not useful. There is an old 2.7 cracked version floating around in the web. That will do the job.
Steps to follow:
1. Install HTC Sync. This software will install HTC Sync and HTC Drivers. All you are looking for is HTC Drivers. So, as soon as installation is complete you can uninstall HTC Sync alone. They have seperate uninstallers.
2. Install HTC Diag drivers. Now, i hope you have access to Windows 7. These drivers didnt install in XP for me. it could work for you.
This step is crucial, without these drivers installed you wont be able to do anything.
i. Connect your phone to PC.
ii. Just leave it on charge mode. The HTC drivers you installed in previous step should recognize the phone.
iii. Goto the dialer in phone. dial ##3424. press call. This should put the phone in DM mode.
iv. Win 7 will try to find the drivers and fail. If you open the device manager (or short cut just run devmgmt.msc), you should see the
2 devices with no drivers. HTC DIAG and HTC DIAG 9K.
v. double click on HTC Diag and click upgrade drivers. You need to manually upgrade the drivers..
http://forum.xda-developers.com/showthread.php?t=697487 This guide does a very good job. I dont want to repeat it. You can look at it if you are stuck. Just look at the driver installation part alone.
vi. Just ignore the HTC Diag 9k for now.
3. You have done a major step already. (I got stuck on step 2 for quiet sometime.). Install cdma workshop(CDMAWS). This software will trip anti-virus software(AV). So, just turn-off AV( or add CDMAWS in your AV's exclusion list). Apparently CDMAWS does use the virus technique to work but it is not malicious.
i. connect the phone to PC and dial ##3424 for DM mode. Find out which COM port your phone is using to connect.
ii. start CDMAWS. Select the COM port you phone uses. click connect. These should be in the topline of the GUI.
iii. if you are connected. The status bar at the bottom of window should indicate it. If everything is fine, click read(it should be next to connect/disconnect button). If everything is working so far, lots of empty spaces will be populated with data.
iv. switch to the Security tab. look for a spc button. enter "000000" in the text box above it(dont include quotes). This is the password for EPST. click spc -> spc send. you should see a pop-up saying phone unlocked. (if you are using this guide for Sprint phones, you need to obtain this password). Verizon just leaves it unlocked.
v. goto 'other' tab. look for RU-IM. click on the drop-down box. Select "NV-only". This option will be present only in full version.
vi. if you have not downloaded the attachment on this post, do it now. Now focus your attention on PRL box in the same tab as in step v.
PRL stands for preferred raoming list. I have attached 2 prl files. For me the 51720-evdo.prl gave roaming sign. I used 52711.prl, it worked fine. Click on write and choose 52711.prl from you download directory. It should write, the information to your phone.
vii. next switch to NAM tab. Enter the MIN you got from the email you got from kitty wireless (link is provided above). You can also get that info from pageplus by calling. MDN is nothing but your cell number. Enter that in dir or directory text box. click write.
4. you are done with CDMAWS. you can reboot your phone. At this point, if you havent changed ESN with pageplus do so now. You can do ESN change through online chat at pageplus website. It is free.
5. If you see roaming sign on your rezound, you need to use a different PRL. Roaming is indicated by a small triangle above the signal bars. start CDMAWS and select a different PRL file to write to your phone(steps 3(i) - 3(vi)). If everything is fine, from you rezound, call *22890 to program your phone. You can also use *22801 to program. if after a short pause it says unable to program your phone. It failed to program. Make sure you followed all the steps. If after a long pause it says unable to program. you have succeeded in getting the phone registered with pageplus. Now you should have your phone working for Voice and SMS/texting.
6. Take a deep breath and pat yourself, you have achieved a major step. Now to program 3g part. As i said before, if you are having locked stock ICS rom, you wont be able to go further. ICS doesn't let changing APNs. GB is fine with changing APNs. I havent rooted my ICS. i am just happy with a working Voice and SMS for my needs. Wifi satisfies my need.
7. Fire up QPST configuration.
i. Click on "Add New Port..." Select the port your device is on. It should be same as in CDMAWS.
ii. On the next screen highlight your device.
iii. Click on "Start Clients--Service Programming"
iv. Click 'Read From phone" When the prompt pops up click "OK"
v. Now tab over to "M.IP"
vi. In the drop down below that says simple ip+Mobi change that to "Simple IP"
vii. Now double click on "Profile 2"
viii.In the "NAI" section put your phone [email protected]
ix. In the "tetheredNAI" section put your phone [email protected]
x. For the IP Address put 255 all the way across for the last two sections and leave the 0's in the first section and Click OK
xi. Now click on "PPP config"
xii. Click "Um"
xiii. In the box that says "User ID", Enter your phone [email protected]
xiv. Click in the box that says "Tethered NAI", Enter your phone [email protected]
xv. Click in the box that says "Password", Enter "vzw"
xvi. Click the "AN" tab, User ID is your phone [email protected] and Password is "vzw"
xvii. Click "write to phone"
8. Power your phone down then reboot it.
9. i. Connect to wifi
ii. Open market
iii. Search for "APN Backup and Restore" and install. If you have GB, this will work on it own. Now if you have a rooted ICS, you can use Titanium Backup pro to run this system app. ICS allows system apps to modify APNs.
iv. Open APN and click Backup APN's
v. Now put your phone in "airplane mode"
vi. Click "delete apn's"
vii. Click "restore apn"
viii. Select page plus apn from below
ix. Disable Airplane Mode
x. Reboot
And thats it your fully flashed with MMS, Talk, Text, 3G
Credit goes to lots of folks. Mainly to Nevell, techwerkz, folks at howard forums and scores of others who are not mentioned.
Hope this helps a few folks.
Great guide.
hey guys, im kinda new to this and im planning to switch from VM to PP. I am plannng to buy the HTC Rezound. When i buy it, do i have to buy the contract version or the "month to month" version on the verizon site?? And does this tutorial actually work? Can anyone confirm it? And i dont care about 3g or 4g so i just want talk and text/
vwade79 said:
hey guys, im kinda new to this and im planning to switch from VM to PP. I am plannng to buy the HTC Rezound. When i buy it, do i have to buy the contract version or the "month to month" version on the verizon site?? And does this tutorial actually work? Can anyone confirm it? And i dont care about 3g or 4g so i just want talk and text/
Click to expand...
Click to collapse
Im thinking of selling mine soon. PM me if your interested.
Sent from my Nexus 7 using Tapatalk 2
I got 3G data working on stock ICS 4.0.3.605.1
To make it work you need to write all necessary settings to the 9K port as well. The tricky part is that QPST will not work and you have to use full paid version of CDMA Workshop or DFS (free version is ok) instead.
Repeat steps 3 and 4 of javamaan's guide for port 9k and use DFS for step 7.
Go to Programming/Data. Fill all fields in PAP, PPP, HDR AN, HDR AN Long and HDR AN PPP boxes. Set HDR SCP force AT config to RevA_MFPA. Uncheck eHRPD enabled. Go to Mobile IP and set NAI to [email protected].
When writing, make sure that it actually writes the data. Enable full logging and see if green "nv item written ok" messages appear. Ignore offline-d errors.
For more detailed instructions, see this cricket flashing guide.
You also need to have any sim card inserted to enable Mobile network Off/On switch in settings and get rid of the annoying message on the lock screen.
APN settings have no effect in CDMA mode. I've never touched APN menu and data works just fine.
The only thing it might be necessary is MMS, but I've never bothered to set it up.
Hello all,
For the life of me, I can't get sms or 3g to work. I've gone over this tutorial over and backwards and even did the cricket tut.
My rezound is on GB. I downgraded it with the official, stock, OTA or what ever you want to call it GB. I'm rooted but not custom ROM. I just got rid of the bloatware.
I have PPC service. Thanks, that part was great! There is a "write" line missing in the RU IM part, but I figured it out. Voice and simple text work but no sms. I even copied my wife's apn from her cell, but still, no go.
OK, done with my rant. Just had to let it out. So my steps:
in QPST - wrote everything to 8K as stated above, to the "t"
-I did come up with an error, but checked it in DFS and everything was there.
in DFS - wrote everything to 9k as stated above, to the "t"
Found the apn file from another thread because it is missing in this one. Did a restore, and.....nothing.
Found the apn settings from another site and entered it in manually......nothing.
Copied my wife's apn settings...nothing.
Made myself a drink...at least I have a good buzz going...check my phone...nothing...DOHHH!
What do I do now???
Cheers!
AsianCajun said:
Hello all,
For the life of me, I can't get sms or 3g to work.
Click to expand...
Click to collapse
As already mentioned above, forget about the APNs! They are not used for CDMA mode (except MMS). Until you have 3G data, just leave the default VZWINTERNET APN as it is.
You don't need to downgrade to GingerBread. I've done everything on ICS 4.0.3.605.1, but 4.0.3.605.2 should work as well.
Make sure you've actually written everything to both ports. Especially 9K port. Read back and check if all values are there (except passwords that can't be read). Read PRL and make sure that version is 51720.
Post your screenshots of DFS after you read the data (NAM/PRL, Data and MobileIP pages).
OK, I wrote the prl over again and opened up DFS and wrote to nam1 and nam2.
Well, I was able to get it to work. I put ics back on, updated to one of the newer prl's and put a sim chip. I'm not sure what did the trick, but my bet is on the chip. note* I used an old at&t sim chip that I had laying around. I still get the warning on the lock scene, but that doesn't bother me. Thanks again to those who made these tuts.
Cheers
Im getting close to getting my Rez up on PP,... (deleted)
EDIT: Thanks so much for this thread, Im well on my way, with a few bumps along the way while I learn the software and phone. was stuck at step 5 til I realized you did the programming and dont need the #22890. with or w/o my new sim, I can make & receive calls/texts. Im barred from the ota programming by the phone.
Now I'm figuring out qpst as to why it doesnt show profile 2, just a single profile (0). So I dont know if I should modify that profile 0... And I need to get rid of the error message re the 4g activation. So i'm a little ways from having any data functioning... going to bed, sleepy and cross-eyed...
"Activating your phone..."
In the lock screen, how do you remove the irritating "Activating your phone..." message. I have everything working except MMS, but I don't care about it, I just want the stupid notification gone.
I also have an LTE card installed. I had remotesquaD flash it for me...
HTC Rezound on PagePlus no 3G data
javamaan said:
Ok folks. If you are like me, you searched all over the web didnt find a definitive answer on how to go about getting your HTC rezound to Pageplus.
I bought a used Rezound. It came with NO Verizon SIM card. No software updates to it. I read a lot, sounded like getting to the latest stock was a good idea as it usually fixes issues. Well, I promptly updated to the leaked global ICS rom. Go the rom from android police dated Aug 15.
So my rezound had locked stock global ICS rom, no SIM card. Here is how i flashed it to pageplus. Please follow the steps as mentioned, as i have stumbled too many times and got it working.
================================
Not a must but...
1. Dont upgrade your phone to ICS rom if you dont want to root your phone. As ICS blocks APN updates. Meaning if you need 3g on pageplus or any other carrier and you dont want to root your phone, dont upgrade. If you dont mind rooting your phone, you can just ignore this warning.
Requirements:
MIN and MDN Information:
You can get MIN and MDN by calling pageplus or follow steps below.
goto http://www.kittywireless.com/pageplus/phonestatusform.html
right at the bottom you can enter email and phone number. You will get an email with MIN and MDN information.
OS Requirement:
Windows 7 64bit or 32bit. No support for Linux, Mac or XP(??).
Software you will need:
1. HTC Sync http://www.htc.com/us/support/htc-rezound-verizon/software-updates.
2. HTC Diag drivers. You can download from below.
3. QPST. http://conflipper.com/Software/QPST_2.7_366.rar
4. CDMA Workshop. You need the full version. Demo is not useful. There is an old 2.7 cracked version floating around in the web. That will do the job.
Steps to follow:
1. Install HTC Sync. This software will install HTC Sync and HTC Drivers. All you are looking for is HTC Drivers. So, as soon as installation is complete you can uninstall HTC Sync alone. They have seperate uninstallers.
2. Install HTC Diag drivers. Now, i hope you have access to Windows 7. These drivers didnt install in XP for me. it could work for you.
This step is crucial, without these drivers installed you wont be able to do anything.
i. Connect your phone to PC.
ii. Just leave it on charge mode. The HTC drivers you installed in previous step should recognize the phone.
iii. Goto the dialer in phone. dial ##3424. press call. This should put the phone in DM mode.
iv. Win 7 will try to find the drivers and fail. If you open the device manager (or short cut just run devmgmt.msc), you should see the
2 devices with no drivers. HTC DIAG and HTC DIAG 9K.
v. double click on HTC Diag and click upgrade drivers. You need to manually upgrade the drivers..
http://forum.xda-developers.com/showthread.php?t=697487 This guide does a very good job. I dont want to repeat it. You can look at it if you are stuck. Just look at the driver installation part alone.
vi. Just ignore the HTC Diag 9k for now.
3. You have done a major step already. (I got stuck on step 2 for quiet sometime.). Install cdma workshop(CDMAWS). This software will trip anti-virus software(AV). So, just turn-off AV( or add CDMAWS in your AV's exclusion list). Apparently CDMAWS does use the virus technique to work but it is not malicious.
i. connect the phone to PC and dial ##3424 for DM mode. Find out which COM port your phone is using to connect.
ii. start CDMAWS. Select the COM port you phone uses. click connect. These should be in the topline of the GUI.
iii. if you are connected. The status bar at the bottom of window should indicate it. If everything is fine, click read(it should be next to connect/disconnect button). If everything is working so far, lots of empty spaces will be populated with data.
iv. switch to the Security tab. look for a spc button. enter "000000" in the text box above it(dont include quotes). This is the password for EPST. click spc -> spc send. you should see a pop-up saying phone unlocked. (if you are using this guide for Sprint phones, you need to obtain this password). Verizon just leaves it unlocked.
v. goto 'other' tab. look for RU-IM. click on the drop-down box. Select "NV-only". This option will be present only in full version.
vi. if you have not downloaded the attachment on this post, do it now. Now focus your attention on PRL box in the same tab as in step v.
PRL stands for preferred raoming list. I have attached 2 prl files. For me the 51720-evdo.prl gave roaming sign. I used 52711.prl, it worked fine. Click on write and choose 52711.prl from you download directory. It should write, the information to your phone.
vii. next switch to NAM tab. Enter the MIN you got from the email you got from kitty wireless (link is provided above). You can also get that info from pageplus by calling. MDN is nothing but your cell number. Enter that in dir or directory text box. click write.
4. you are done with CDMAWS. you can reboot your phone. At this point, if you havent changed ESN with pageplus do so now. You can do ESN change through online chat at pageplus website. It is free.
5. If you see roaming sign on your rezound, you need to use a different PRL. Roaming is indicated by a small triangle above the signal bars. start CDMAWS and select a different PRL file to write to your phone(steps 3(i) - 3(vi)). If everything is fine, from you rezound, call *22890 to program your phone. You can also use *22801 to program. if after a short pause it says unable to program your phone. It failed to program. Make sure you followed all the steps. If after a long pause it says unable to program. you have succeeded in getting the phone registered with pageplus. Now you should have your phone working for Voice and SMS/texting.
6. Take a deep breath and pat yourself, you have achieved a major step. Now to program 3g part. As i said before, if you are having locked stock ICS rom, you wont be able to go further. ICS doesn't let changing APNs. GB is fine with changing APNs. I havent rooted my ICS. i am just happy with a working Voice and SMS for my needs. Wifi satisfies my need.
7. Fire up QPST configuration.
i. Click on "Add New Port..." Select the port your device is on. It should be same as in CDMAWS.
ii. On the next screen highlight your device.
iii. Click on "Start Clients--Service Programming"
iv. Click 'Read From phone" When the prompt pops up click "OK"
v. Now tab over to "M.IP"
vi. In the drop down below that says simple ip+Mobi change that to "Simple IP"
vii. Now double click on "Profile 2"
viii.In the "NAI" section put your phone [email protected]
ix. In the "tetheredNAI" section put your phone [email protected]
x. For the IP Address put 255 all the way across for the last two sections and leave the 0's in the first section and Click OK
xi. Now click on "PPP config"
xii. Click "Um"
xiii. In the box that says "User ID", Enter your phone [email protected]
xiv. Click in the box that says "Tethered NAI", Enter your phone [email protected]
xv. Click in the box that says "Password", Enter "vzw"
xvi. Click the "AN" tab, User ID is your phone [email protected] and Password is "vzw"
xvii. Click "write to phone"
8. Power your phone down then reboot it.
9. i. Connect to wifi
ii. Open market
iii. Search for "APN Backup and Restore" and install. If you have GB, this will work on it own. Now if you have a rooted ICS, you can use Titanium Backup pro to run this system app. ICS allows system apps to modify APNs.
iv. Open APN and click Backup APN's
v. Now put your phone in "airplane mode"
vi. Click "delete apn's"
vii. Click "restore apn"
viii. Select page plus apn from below
ix. Disable Airplane Mode
x. Reboot
And thats it your fully flashed with MMS, Talk, Text, 3G
Credit goes to lots of folks. Mainly to Nevell, techwerkz, folks at howard forums and scores of others who are not mentioned.
Hope this helps a few folks.
Click to expand...
Click to collapse
Hello everyone, I am new to this forum and first thing I want to do is thank everyone for their time and effort of putting the useful information on this forum! Also thanks to javamaan, I have been able to activate my HTC Rezound (previously on Verizon) on PagePlus. I have the following working: Talk, TXT, MMS, and 1X data. But no matter what I do, (spent over a week on this now, no kidding) I can't get 3G working.
I have the original Verizon 4GLTE sim card installed.
I am S-OFF, rooted, running leaked android 4.0.3 (4.03.605.3). (QPST is only good for 8K port)
I use mostly CDMAWS 3.8.7 demo and DFS 4.0.0.5 to manipulate data.
I write same data values to 8K and 9K ports, to NAM1 and NAM2.
Could it have something to do with HA and AAA shared secret values? some say leave it blank, some say 'vzw' (in hex), some say need to get those off of a donor phone.....
Could it be that when writing any passwords in DFS for 9K port they don't seem to showup/stick?
Thank you!
-snpiee
Wileyworld said:
Im getting close to getting my Rez up on PP, but am stuck on (step 5) since I cant dial out to program phone
Click to expand...
Click to collapse
I never could get *228xx activation to work. Just filled all data manually.
You can try to insert some other sim card, like AT&T or whatever. It just wants to have something in the slot.
@ Wileywold:
Step 5 is just if you get the triangle by the signal bars. *228 in any form will give you that error. I followed yura's directions and programmed for the mms and 3g using DFS.
@ snpiee:
On my phone HA is 300 and AAA is 2. Like you, I don't know if that has anything to do with programming or not. I've tried different prls and still can't get 3g to show up. I'm also stuck on 1x.
snpiee said:
Could it have something to do with HA and AAA shared secret values? some say leave it blank, some say 'vzw' (in hex), some say need to get those off of a donor phone.....
Click to expand...
Click to collapse
You definitely don't need a donor phone. As I recall, I did "vzw". Actually, all that Mobile IP NAI stuff is not used if "Simple IP only" is selected.
Also, someone suggested to do a software reset with 4G SIM inside after writing all values. Not sure if it really helps, but you can try.
snpiee said:
Could it be that when writing any passwords in DFS for 9K port they don't seem to showup/stick?
Click to expand...
Click to collapse
Passwords don't show up when I read back after writing, so this is OK.
Check PRL version and other stuff.
---------- Post added at 10:10 PM ---------- Previous post was at 09:59 PM ----------
AsianCajun said:
I've tried different prls and still can't get 3g to show up. I'm also stuck on 1x.
Click to expand...
Click to collapse
Oh, I thought you finally got 3G... I will go make my DFS screenshots now, so we can compare.
I just updated my prl to 52874 hoping it would point my Rez to 3g towers. Well, I'm still on 1x.
Screenshots of 9K port. I've highlighted some important items.
I finally got it. I wrote to both 8K and 9K ports and NAM1 and NAM2. All values were the same. My prl is the most recent verizon from my area, which is 52874. Here are the screen shots.
Thanks again to yura and javamaan for their hard work!
AsianCajun said:
I finally got it. I wrote to both 8K and 9K ports and NAM1 and NAM2. All values were the same. My prl is the most recent verizon from my area, which is 52874. Here are the screen shots.
Thanks again to yura and javamaan for their hard work!
Click to expand...
Click to collapse
You got 3G working now? I will compare your values to mine when I get home today....
Thanks for posting DFS screenshots!
By the way in your pics you use PrefMobileIP not SimpleIP is that correct?
Yura80 said: "Screenshots of 9K port. I've highlighted some important items."
Thanks for kindly sharing help here! I continue to tinker with this by lurking here and (after success with voice/texts/1x data) I'm now working on getting the 3g operating, and the dfs screen shots are very helpful. I want to upload a few for someone to see, and point me closer to my goal. Ive tried to imitate yours, but im running dfs 3.1.xxx and there are a few differences in the location of items, and labeled a bit different. I had to guess at one of the places to insert the dun info since it didnt show quite the same layout of lines/descriptions.For example, PAP has an extra line called data, while the PPP section has 1 less line , so I tried the dun line in that PAP section.
I'm very close to having this thing DONE and I never would have gotten here without great tutors right here!
BTW, What do you use to get the great screen shots to insert here in the forum?
Well I got ahold of my 5th note 3 and nobody has the best step on how to unlock it on android 5.0 OC5 without downgrading back 4.2 so i will be posting it
Step 1:
Root it using it CF-Auto-root
https://download.chainfire.eu/362/CF-Root/CF-Auto-Root/CF-Auto-Root-hltespr-hltespr-smn900p.zip
Step 2:
Get ahold of iDone's GTv3.1.5.apk & GTUpdate2_v3.1.8.apk Install them and do the update but dont press unlock yet
Step 3 :
Downgrade the modem back M13 or Mj4 (i will double check but i have the link for the one i used )
https://mega.nz/#!mg5nVZiD
I think it was m13 plus my phone says it sooo lol
Step 4 :
After downgrading the modem back to m13 you can now go to idone gt app and press (SIM UICC Unlock) after that restart the phone (now the phone is internationally unlock)
Step 5 :
Final in the unlocking process for it work in the united states aka domestic
Goto the phone app and dial *#0011# the menu should open up press menu and back then menu key input "Q" press ok then press menu key input again "0000" press ok and wait for the menu to open
UE Setting & Info >Setting >Protocol >GCF >GSM/(E)GPRS/WCDMA GCF ON
It will say "success". Reboot the device then its domestically unlock
P.S. if you are you are using a International sim the us in order for it to roam you would have to do this step
Im also not responsible for any damage done to your device :good:
on step 3, the link prompts to insert decryption key
Unlocking Procedure
I'm new to unlocking and wanted to know if it's possible for you to add a bit more detail to this unlock procedure?
Thanks
Mitch
Note 3 unlock on domestic network
AndroidKing said:
Step 5 :
Final in the unlocking process for it work in the united states aka domestic
:good:
Click to expand...
Click to collapse
By domestic unlock do u mean it will work on t mobile?
Wow, this works perfectly. Running on AT&T.
Thanks : )
AndroidKing said:
Well I got ahold of my 5th note 3 and nobody has the best step on how to unlock it on android 5.0 OC5 without downgrading back 4.2 so i will be posting it
Step 1:
Root it using it CF-Auto-root
https://download.chainfire.eu/362/CF-Root/CF-Auto-Root/CF-Auto-Root-hltespr-hltespr-smn900p.zip
Step 2:
Get ahold of iDone's GTv3.1.5.apk & GTUpdate2_v3.1.8.apk Install them and do the update but dont press unlock yet
Step 3 :
Downgrade the modem back M13 or Mj4 (i will double check but i have the link for the one i used )
https://mega.nz/#!mg5nVZiD
I think it was m13 plus my phone says it sooo lol
Step 4 :
After downgrading the modem back to m13 you can now go to idone gt app and press (SIM UICC Unlock) after that restart the phone (now the phone is internationally unlock)
Step 5 :
Final in the unlocking process for it work in the united states aka domestic
Goto the phone app and dial *#0011# the menu should open up press menu and back then menu key input "Q" press ok then press menu key input again "0000" press ok and wait for the menu to open
UE Setting & Info >Setting >Protocol >GCF >GSM/(E)GPRS/WCDMA GCF ON
It will say "success". Reboot the device then its domestically unlock
P.S. if you are you are using a International sim the us in order for it to roam you would have to do this step
Im also not responsible for any damage done to your device :good:
Click to expand...
Click to collapse
What is the "Enter decryption key" that we need for Step 3?
IT WORKS!!!
I was getting 3G and H+ on my N900P and I couldn't have been more happy. Alright, so I've uploaded a zip file with everything you need.
Here's the link to the zip file on my Google Drive: http://bit.ly/1oZDO9t
Edit: The modem is version MI3 (That's emm eye three). Also, after you apply the GCF settings and reboot, you need to change your mobile networks settings from CDMA/LTE to GSM/UMTS for the new SIM card to be recognized. Enjoy!
BlockOfDynamite said:
IT WORKS!!!
I was getting 3G and H+ on my N900P and I couldn't have been more happy. Alright, so I've uploaded a zip file with everything you need.
Here's the link to the zip file on my Google Drive: link removed
Edit: The modem is version MI3 (That's emm eye three). Also, after you apply the GCF settings and reboot, you need to change your mobile networks settings from CDMA/LTE to GSM/UMTS for the new SIM card to be recognized. Enjoy!
Click to expand...
Click to collapse
I tried to download the zip file from the link provided and received a binary file.
JeopardyRage said:
I tried to download the zip file from the link provided and received a binary file.
Click to expand...
Click to collapse
What do you mean you received a binary file? What was the extension on the file you got? It should be a .zip file. If it's not, you'll have to redownload it.
BlockOfDynamite said:
What do you mean you received a binary file? What was the extension on the file you got? It should be a .zip file. If it's not, you'll have to redownload it.
Click to expand...
Click to collapse
Download in browser, got that trying to download with Google drive.
Sent from my SM-G920V using XDA-Developers mobile app
rbeavers said:
Download in browser, got that trying to download with Google drive.
Sent from my SM-G920V using XDA-Developers mobile app
Click to expand...
Click to collapse
It should look like this in your browser. Make sure you click the download button on the top. If it comes out as anything but .zip, then try a different browser.
toolsoldier said:
on step 3, the link prompts to insert decryption key
Click to expand...
Click to collapse
https://docs.google.com/uc?id=0B5gwgS8Wzjj1QzFuaXF0WFNnenc&export=download
It didn't work
I went through the process but when I click the sim UICC unlock a new notification pops up asking, network unlock asking for control key
MI3 Modem needed
Daniel Owusu said:
I went through the process but when I click the sim UICC unlock a new notification pops up asking, network unlock asking for control key
Click to expand...
Click to collapse
I had same problem at first, I didn't go back to modem MI3 from OK2, after it worked perfectly.
it didn't work
My sprint note 3 uicc now shows that the phone is unlocked but there is a red X on the network signal bar. How can I get rid of this to make my phone work? Please help
My network is blocked and IMEI certi shows failed
I have been able to unlock the phone but when I checked on the service mode, I realized the network is blocked and the IMEI certi shows failed.
This has caused the network signal bar to show a red X. Though unlocked, there is no signal showing. Any help please
AndroidKing said:
Well I got ahold of my 5th note 3 and nobody has the best step on how to unlock it on android 5.0 OC5 without downgrading back 4.2 so i will be posting it
Step 1:
Root it using it CF-Auto-root
https://download.chainfire.eu/362/CF-Root/CF-Auto-Root/CF-Auto-Root-hltespr-hltespr-smn900p.zip
Step 2:
Get ahold of iDone's GTv3.1.5.apk & GTUpdate2_v3.1.8.apk Install them and do the update but dont press unlock yet
Step 3 :
Downgrade the modem back M13 or Mj4 (i will double check but i have the link for the one i used )
https://mega.nz/#!mg5nVZiD
I think it was m13 plus my phone says it sooo lol
Step 4 :
After downgrading the modem back to m13 you can now go to idone gt app and press (SIM UICC Unlock) after that restart the phone (now the phone is internationally unlock)
Step 5 :
Final in the unlocking process for it work in the united states aka domestic
Goto the phone app and dial *#0011# the menu should open up press menu and back then menu key input "Q" press ok then press menu key input again "0000" press ok and wait for the menu to open
UE Setting & Info >Setting >Protocol >GCF >GSM/(E)GPRS/WCDMA GCF ON
It will say "success". Reboot the device then its domestically unlock
P.S. if you are you are using a International sim the us in order for it to roam you would have to do this step
Im also not responsible for any damage done to your device :good:
Click to expand...
Click to collapse
Better solution here. Just tryin to help http://forum.xda-developers.com/note-3-sprint/help/how-to-t-mobile-gsm-true-4g-lte-unlock-t3448000
johnb4200 said:
Better solution here. Just tryin to help http://forum.xda-developers.com/note-3-sprint/help/how-to-t-mobile-gsm-true-4g-lte-unlock-t3448000
Click to expand...
Click to collapse
No LTE, don't know about sim unlock.
Sent from my SM-G920V using XDA-Developers mobile app
rbeavers said:
No LTE, don't know about sim unlock.
Sent from my SM-G920V using XDA-Developers mobile app
Click to expand...
Click to collapse
Hey rbeavers what do you mean don't know about sim unlock did you urself try my method and now running a tmobile sim on a tmobile rom on your exsprint note I also pm you my personal phone number to assist u in getting your lte going should be a cinch since you got 4g up already
johnb4200 said:
Hey rbeavers what do you mean don't know about sim unlock did you urself try my method and now running a tmobile sim on a tmobile rom on your exsprint note I also pm you my personal phone number to assist u in getting your lte going should be a cinch since you got 4g up already
Click to expand...
Click to collapse
As I said, in your thread, I was unlocked all ready.
Sent from my SM-G920V using XDA-Developers mobile app
After reading through the OPO thread and someone confirming they saw bands unlocked for their OP2, but could not test if they are working as well as reading through the OP3 and similar threads with our processor I finally delved into trying this. Here is the quick guide of how to do it. Sorry if there is any confusion I will try my best to make it concise as possible. This is my first time writing a guide up for XDA.
I have not been able to test each band to confirm it's working, but it is showing up in Network Guru. I am on AT&T so I only unlocked AT&T bands (bc that's all I care about currently and it makes it easier for me to test)
I WILL NOT BE HELD RESPONSIBLE IF SOMETHING WRONG HAPPENS TO YOUR DEVICE BY FOLLOWING THIS GUIDE!
Credit: All my fellow XDA'rs who have been diligently testing, experimenting, bricking/unbricking, creating ROMs, FLASH, Root ability, and Bootloader unlocking. You are the heart and soul of XDA!
[URL="https://forum.xda-developers.com/member.php?u=4066277" @otonieru[/URL] for the concise guide
[URL="https://forum.xda-developers.com/member.php?u=7846474" @baskaflyfer[/URL] Rmt Storage Patch Zip
Here is the OP3 thread I based this guide off of and credit to all those mentioned in there as getting this far would have been impossible without them: https://forum.xda-developers.com/oneplus-3/how-to/guide-unlock-additional-lte-bands-t3519563
OKAY:
PreReq's:
1. Rooted
2. TWRP or like
3. RMT Storage patch from OP3 forums: SEE POST BELOW!
4. DFS Explorer - Find via searching XDA, again checking OP3 thread or OPO
5. ADB installed (whether that be minimal ADB or like from other toolboxes out there)
6. QPST - Check forums for download
Guide:
1. Put phone in MTP mode if not default (Some default to charge mode) Just go to status bar and press the charging mode to change to file transfer
2. Place file from PRE-REQ #3 in a folder you'll remember
3. Reboot phone (or shut down) and when coming on hold Vol Down+Power for a few seconds and let go
4. Boot into TWRP
5. Backup (If you don't have a backup of EVERYTHING at this point, probably a good idea to do so)
---If you do take only EFS
And install file from #3
6. Restart into System
7. Open up your CMD and run this ADB command :
adb devices
adb shell
su (you will get pop up on your phone to give root authorization for ADB, authorize it)
setprop sys.usb.config diag,adb (this will open your OP3 diagnostic port)
Click to expand...
Click to collapse
This forces it into DIAG mode, check your Device Manager to see if you see a port connection displaying a COM PORT.. IF NOT, you need to install drivers--Search thread for drivers, likely will be find in original OPO or OP3 thread.
***********THIS SECTION IS PURELY PRECAUTIONARY*********************** SKIP TO 11 IF YOU WANT
Purely precautionary we did not have to restore any QCN as they do in OP3 due to encryption:
8. Install QPST, open QPST
Now fire up QPST and go to "Port" tab, and choose "Add New Port" ,
9. On "Serial/USB Port" tab, unchecked the option of "Show Serial & USB...bl bla bla" option, you will see your phone listed there as a "COM#" (# is a number depending on your PC) choose it, and click "OK"
10. Now choose "Start Clients" from the Menu tab above, and choose "Software Download"
**********************************************************************************
11. CLOSE QPST. Open up DFS Explorer, when the signup option comes up it is up to you whether or not you want to register for an account (Good to support them since it's a good application) If not, press the X and the app will be there
12. You should see your PORT listed as you did on QPST. Double click on it (If you can't; confirm QPST is closed otherwise you won't be able to connect to the port) You should see it turn green and highlighted ONLINE if you successfully connected
13. Go to the "Band" option then click on "LTE"
14. Press READ; Give it a second and you should see all currently enabled bands listed; If you want to compare you can go to "Network Guru" and press the 3 dots on the top right and press Band Locking and then press LTE.. Should list the same ones
15. Check the additional bands (Just because it says it's enabled, doesn't mean hardware wise it will work due to chipset hardware limitations; This is why as you all do this if you can confirm which bands for you connected and/or didn't connect we can keep a running list.)
16. Press "Write"
17. Since we're in Demo mode it will count down and then in the LOG box you'll see operation successful
18. Restart the phone at this point and disconnect the cable
19. Wait until it boots up again and go to "Network Guru" press the 3 dots again and go to Band Locking and you should see the new bands listed
*If you don't press the 3 dots and press Clear forcings and it'll prompt that a power cycle may occur; That's okay, let it, mine did, wait until the phone comes back up and repeat 19 and the new bands should be listed.
20. LET US KNOW ON THIS THREAD what bands are working, what aren't. It will allow us to further play with the device to discover if there's limitations or if further editing is required like in the OP3.
*Please press THANK YOU if this guide was helpful.
**Sorry for the missing of some info in the guide! Seems when I added the HYPERLINK it removed most of the other text before it so it started at #4 instead of the remainder of #1-3
Direct link to RMT STORAGE PATCH:
Rmt Storage Patch Zip
usb debugging should be enabled i think, you didn't mentioned that. " (this will open your OP3 diagnostic port)" and here should be op2 i think. thanks for thread, i have a2005 and want to unlock 20 band(800mhz), will try asap, now i have exams running out of time. btw, so the risk of breaking phone is low right, this steps only modify EFS partition only? so hybrid recovery and flashfire can backup/restore if enything goes wrong
What is the benefit from this? Better reception?
Sent from my ONE A2005 using Tapatalk
So... Are your at&t bands working now? Which bands specifically?
我從使用 Tapatalk 的 Nexus 9 發送
Still something is missing
Hi, I think something is missing. Let me describe what I have done on a A2005:
1- I downloaded the rmt_storage from the link provided on Pre-reqs #3.
2- I backed up EFS, installed the patched rmt_storage, reboot into system.
3- I installed the modified HTC modem driver as unsigned driver, did the adb diag port commands, and the phone is recognized by DFS.
4- On DFS, I must click on SPC 000000 since the log shows errors. I'm not sure if a specific SPC value is required ***
5- When I click on Read, it captures the values, I wanted to add Band 3 (1800) so I checked it and then clicked on write. The logs showed that the write was successful.
6- I restart the phone, connect it and load adb diag port commands again, load DFS, click on read and the values stay
7- When I open Network Guru on locked LTE bands, the list shows me the previous one, as if nothing has been written. I restarted the phone already several times, still no LTE on Band 3.
Besides the SPC code, I might think that:
- The rmt_storage somehow it's not working
- DFS keeps the values but they are not reflected into Network Guru or phone. I already set 4G/3G/2G enabled on the connectivity options. No changes
- Maybe there is another value that needs to be changed with another tool such as QXDM
Any help would be very appreciated!!!
haroldgv said:
Hi, I think something is missing. Let me describe what I have done on a A2005:
1- I downloaded the rmt_storage from the link provided on Pre-reqs #3.
2- I backed up EFS, installed the patched rmt_storage, reboot into system.
3- I installed the modified HTC modem driver as unsigned driver, did the adb diag port commands, and the phone is recognized by DFS.
4- On DFS, I must click on SPC 000000 since the log shows errors. I'm not sure if a specific SPC value is required ***
5- When I click on Read, it captures the values, I wanted to add Band 3 (1800) so I checked it and then clicked on write. The logs showed that the write was successful.
6- I restart the phone, connect it and load adb diag port commands again, load DFS, click on read and the values stay
7- When I open Network Guru on locked LTE bands, the list shows me the previous one, as if nothing has been written. I restarted the phone already several times, still no LTE on Band 3.
Besides the SPC code, I might think that:
- The rmt_storage somehow it's not working
- DFS keeps the values but they are not reflected into Network Guru or phone. I already set 4G/3G/2G enabled on the connectivity options. No changes
- Maybe there is another value that needs to be changed with another tool such as QXDM
Any help would be very appreciated!!!
Click to expand...
Click to collapse
what and where is PRE-REQ #3?
haroldgv said:
Hi, I think something is missing. Let me describe what I have done on a A2005:
1- I downloaded the rmt_storage from the link provided on Pre-reqs #3.
2- I backed up EFS, installed the patched rmt_storage, reboot into system.
3- I installed the modified HTC modem driver as unsigned driver, did the adb diag port commands, and the phone is recognized by DFS.
4- On DFS, I must click on SPC 000000 since the log shows errors. I'm not sure if a specific SPC value is required ***
5- When I click on Read, it captures the values, I wanted to add Band 3 (1800) so I checked it and then clicked on write. The logs showed that the write was successful.
6- I restart the phone, connect it and load adb diag port commands again, load DFS, click on read and the values stay
7- When I open Network Guru on locked LTE bands, the list shows me the previous one, as if nothing has been written. I restarted the phone already several times, still no LTE on Band 3.
Besides the SPC code, I might think that:
- The rmt_storage somehow it's not working
- DFS keeps the values but they are not reflected into Network Guru or phone. I already set 4G/3G/2G enabled on the connectivity options. No changes
- Maybe there is another value that needs to be changed with another tool such as QXDM
Any help would be very appreciated!!!
Click to expand...
Click to collapse
In Network Signal Guru, choose clear forcing. And check the LTE bands again,
or, install Network Signal Guru after you done unlocking, else it will show what it remember on previous set up
---------- Post added at 01:44 PM ---------- Previous post was at 01:43 PM ----------
chxei said:
what and where is PRE-REQ #3?
Click to expand...
Click to collapse
the guide forget to mention that u need to flash rmt storage patch before do any modification,
else no mod will be saved (will revert upon boot)
the patch is in my OP3 thread
Thanks! So today's update:
1- I connected the phone again, ran adb commands, reviewed the bands again on DFS tool and settings stayed. I'm pursuing to enable Band 3
2- I uninstalled Network Signal Guru
3- On Recovery, flashed again the patched rmt_storage, boot the phone, wrote the values again on DFS tool. Reboot phone
4- I installed Network Signal Guru and now it's showing up on the bands lists. I unchecked the bands default on A2005 and used the ones from Eruper/Asia Model as FDD-LTE: Bands 1/3/5/7/8/20 and TDD-LTE: Bands 38/40/41. My provider in Costa Rica (Movistar) uses Band 3 (1800) for their LTE. I clicked on Band locking, clicked on GSM and WDCMA and removed all checks. Then clicked on LTE and left all LTE bands in hopes that it will connect to that frequency. The list shows:
B1: 2100
B3: 1800+
B5: 850
B7: 2600
B8: 900 GSM
B20: 800 DD
B38: TDD2600
B40: TDD 2300
B41: TDD 2500
When I only picked LTE bands as checked, it never resovled to get connected to any cell base.
5- I dialed *#*#4636#*#* to access the information about the phone and monitored the signal setting it up to "LTE Only". No signal on that either
Top of my head, I will restore the qcn backup I made and restore the backup I made for EFS and start again. Now it's saving values after reboot, which is great, but not identifying anything.
Is there any log worth posting here? I read on the OP3 guide that they were restoring a qcn file with bands enabled. Is it worth trying the same?
Anyone that has LTE band 3 enabled would be very appreciated if they post their qcn backup
t99220475 said:
So... Are your at&t bands working now? Which bands specifically?
我從使用 Tapatalk 的 Nexus 9 發送
Click to expand...
Click to collapse
I have not been able to further test as all the phones I compare to that are also AT&T ie: AT&T S6 are connected to the same Bands as me so cannot test til I get to an area where other bands are available currently. Will report back as I can test, but was hoping others can test in the mean time as well.
haroldgv said:
Thanks! So today's update:
Click to expand...
Click to collapse
You shouldn't need to restore any QCN or EFS, just re-check the bands you unchecked and it should pickup all the bands again. Also, confirm your APN is correct to be used with LTE?
Did you get ANY LTE Bands before this mod? Or you only have LTE on Band3?
You can use RAT locking to enable LTE Only rather than unchecking all the WCDMA and GSM bands. that way it'll force LTE, if it doesn't go to the Cellular Network tab and press the Preferred NETWORK to go to LTE ONLY.
sadly for me nothing happened, i have a2005 and want to add band 3 and band 20, did everything 2-3 times whats in a guide, everything went well, write process was comlete but bands didn't added
When you say didn't add, you don't see them in network guru or you see then, but unable to catch signal on them?
aurfawce said:
When you say didn't add, you don't see them in network guru or you see then, but unable to catch signal on them?
Click to expand...
Click to collapse
both, not shown in neywork guru, nor lte signal
chxei said:
both, not shown in neywork guru, nor lte signal
Click to expand...
Click to collapse
You tried to force clear in network guru? If so, when you reconnect and enter diag mode and go to DFS, press bands and LTE, press read, did the changes you made stick?
Just so ppl around here know... there is old forum about band OPT band unlocking with various trials of changing bands, which failed, due to missing RMT patch OR BUT it got MANY juicy info !!!
in the past other users sent me qcn/qcnx files of the EU and CN models ( credit: whoever sent me these files from the old thread ) - I hope this help you out.
keep up the good work ! :good:
gps3dx said:
Just so ppl around here know... there is old forum about band OPT band unlocking.
( un-successful of course due to missing RMT patch OR modem ( on A2005=US) ) with juicy info.
in the past other users sent me qcn/qcnx files of the EU and CN models ( credit: whoever sent me these files from the old thread ) - I hope this help you out.
keep up the good work ! :good:
Click to expand...
Click to collapse
Have you tried what we said here? And tried to see if you can band lock on 3?
I'm going to see the qcn based off of the op3 guide as well as they had to do qcn restoring.
aurfawce said:
Have you tried what we said here? And tried to see if you can band lock on 3?
I'm going to see the qcn based off of the op3 guide as well as they had to do qcn restoring.
Click to expand...
Click to collapse
not yet...it will take me some time, i'm a master's student in exam period.
nontheless, as you can see from the old forum, i'm really interested in opening LTE band 3 on my A2005.
Thanks guys! I live in Venezuela and we use band 3 for LTE and I have the EU version. I'll try this guide today
EDIT: I tried without success, I did all the process but i do not have LTE signal on Band 3. On Network Guru, Band 3 appears as supported. I tried RAT locking but It keeps without signal.
gps3dx said:
Just so ppl around here know... there is old forum about band OPT band unlocking with various trials of changing bands, which failed, due to missing RMT patch OR BUT it got MANY juicy info !!!
in the past other users sent me qcn/qcnx files of the EU and CN models ( credit: whoever sent me these files from the old thread ) - I hope this help you out.
keep up the good work ! :good:
Click to expand...
Click to collapse
Thank you for the qcn files. I've tried it, and it overwrites my imei, which is expected. Then I tried to replace the imei with mine by hex editor, but flashing the modified qcn still overwrites my imei. We may get into the same trouble with op3, which is the imei encryption.
OK so freedompop is an app that lets you call, text, and get data for free. They also include a sim card, but you need to make an account and order it. Add your credit card to make account, once you get it make sure to call them and tell them you want to be on the free service, i got some special that gave sim card plus unlimited call and text with 2gb for 5 dollars. Once you make an account go ahead and go to your sim port and remove sim(easly done by taking a small flat head at 20 degree angle to push sim out, the you can use your finger to push it down or get another small flat head and grab from both sides to pull out). It will say invalid sim.....now thanks to darksavior, this is what i did and the idoneapps gt
Rooted
Step
1. Open up odin, click options and select nand erase all if you want, then click ap and select the N900PVPUDNH7_N900PSPTDNH7_N900PVPUDNH7_HOME.tar. Connect your phone in odin mode(power down, hold volume down, home button, and power button, press up to accept and your in odin mode) then hit start untill your phone reboots
2. Mine gets stuck at the samsung logo so what you do is go to recovery mode(power down, hold volume up, home, power)get to factory reset and reboot. 5 mins later it should say setting up phone for first time, this may take 5 to 10 mins.
3. Congrats, your on stock rom. Invalid sim and attempting to activate phone should pop up, you click active and it will say failed and hit exit. Power back down to odin mode
4. Click ap again and choose the CF-Auto-Root-hltespr-hltespr-smn900p.tar file, it will restart and root, when the message appears 10 seconds to restart try to go into odin mode again and choose the twrp-2.8.7.0-hlte-4.4.img(this is the verision needed to install most roms nowadays) and install twrp. Go to recovery mode, wipe, advance wipe, select delvik cache and cache, then reboot to system. Power off phone again and go into odin mode last time, and click CP button and choose the modem.bin file and reboot to system.
5. put the GTv3.1.5.apk in root of your sd or phone so you can find it. So we need to go to settings, general, security, check mark unknown sources and discheck verify apps. go on apps, samsung, my files, all, choose where you put your file,and click on it, then hit install, open, grant root access, it should say Baseband: N900PVPUBMJ4 and Bootloader: N900PVPUDNH7
6. Click sim uicc unlock, success, and should show UNLOCKED. Click the off button on hiddenmenu and it should turn on, click the IOTHIDDENMENU button on bottom of screen, TestMode Menu, UE SETTINGS AND INFO, SETTINGS, PROTOCOL, GCF, GSM/(E)GPRS/WCDMA GCF ON, success, restart phone to see At&t at bottom
7. Settings, connections, more networks, mobile networks, network mode, Gsm/umts, automatic, then access point names, plus sign, name what ever you want, apn fp.com.attz (or what ever it says in envople your sim came in) the button on the left from home button, save, and click the circle so its green.
8. Turn on your wifi and go to playstore to download the freedompop messaging phone sim app, open it up, it should read your sim and sign you in. Turn off your wifi and you should see an H+ network. Thats it your on freedompop now
9. Since this is older firmware i looked and saw developers stopped making roms for this back in 2014, so your pretty much stuck on this firmware but its not so bad your rooted. So what i did was install System app remover (ROOT) from play store and removed the annoying samsung dms service to get rid of the activation screen and anything else i didnt want on the phone.
Bonus, my 3 year old orginal samsung battery went crazy and kinda got fat. So i ordered another orginal oem note 3 battery because ive tested batterys through AccuBattery app and found out batterys lie about their mAh size orginals dont. Anyways got the new battery, used the battery repair on it, and advanced battery calibrator app, (calabrate, ok, close ad, shut down, charge to 100%) so now my freedom pop working and brand new battery
and here is link to all files from google drive https://drive.google.com/drive/folders/0B9MVYh1yVnznNzhQeWxtUTJhZnM?usp=sharing
Yes, it works. I sim unlocked my note 3 for domestic use without sprint's help. I did it two weeks ago. My phone now gets LTE gsm through freedompop's gsm sim. There's two threads in the general note 3 sprint section to read up on, but this might be the simpler one:
https://forum.xda-developers.com/note-3-sprint/general/sprint-galaxy-note-3-international-t3339789
The tutorial needs to be re-written. The goal is to be on NH7 bootloader, 4.4 rom, and MJ4 modem. Galaxy tools will unlock the sim only on 4.4 and it only needs to be done once. I installed NH7 stock rom, rooted, then installed MJ4 modem. You won't be able to use sprint roms anymore after you're done altering stuff in the hidden menu. It will have trouble getting a gsm signal. I am on a note 7 ported rom from the main note 3 section. You can try any others if you want.
Here's the corrections from the tutorial thread:
Step 1: Do NOT install the cf-auto root recovery from that thread, since its meant for lollipop, and it won't work on kk.
Step 2: You only need GT 3.1.5 apk
Step 3: You only need MJ4
Step 4: You need to be on a 4.4 rom to do this.
Step 5: You can open the hidden menu with GT. No need to open the phone app and dial to get it.
If that doesn't work, I also installed the regionlock away app and changed some other settings of the hidden menu from the other sim unlock thread. I'm not sure if that makes a difference.
Ill try this. So from what i understand. Download stock NH7 rom from sammobile, root, install gt apk, flash the mj4 modem, and follow the directions on gt apk
djhulk2 said:
Ill try this. So from what i understand. Download stock NH7 rom from sammobile, root, install gt apk, flash the mj4 modem, and follow the directions on gt apk
Click to expand...
Click to collapse
Sounds right. Also install twrp 2.8.7.0 recovery so you can install a rom from https://forum.xda-developers.com/galaxy-note-3
It has to be that version because newer versions have issues with roms that use aroma installers.
darksavior said:
Sounds right. Also install twrp 2.8.7.0 recovery so you can install a rom from https://forum.xda-developers.com/galaxy-note-3
It has to be that version because newer versions have issues with roms that use aroma installers.
Click to expand...
Click to collapse
ok the only problem im having is finding a cf rooter under 5.0
ok i followed your instruction i did the 3.15 app only. pressed unlock and the SIM uicc: UNLOCKED. it is also saying phone type gsm, then i dialed Goto the phone app and dial *#0011# the menu should open up press menu and back then menu key input "Q" press ok then press menu key input again "0000" press ok and wait for the menu to open
UE Setting & Info >Setting >Protocol >GCF >GSM/(E)GPRS/WCDMA GCF ON
It will say "success"
and i got success. But it is saying the sim card is still invalid
but i have done all i should right? and am unlocked
djhulk2 said:
ok i followed your instruction i did the 3.15 app only. pressed unlock and the SIM uicc: UNLOCKED. it is also saying phone type gsm, then i dialed Goto the phone app and dial *#0011# the menu should open up press menu and back then menu key input "Q" press ok then press menu key input again "0000" press ok and wait for the menu to open
UE Setting & Info >Setting >Protocol >GCF >GSM/(E)GPRS/WCDMA GCF ON
It will say "success"
and i got success. But it is saying the sim card is still invalid
but i have done all i should right? and am unlocked
Click to expand...
Click to collapse
Are you on the MJ4 modem? I installed that after i unlocked my sim and the invalid sim msg went away. I rooted with kingoroot on pc. There might be alternate ways but that seemed to work.
You can also try the method from https://forum.xda-developers.com/showthread.php?t=2593305
darksavior said:
Are you on the MJ4 modem? I installed that after i unlocked my sim and the invalid sim msg went away. I rooted with kingoroot on pc. There might be alternate ways but that seemed to work.
You can also try the method from https://forum.xda-developers.com/showthread.php?t=2593305
Click to expand...
Click to collapse
yes im getting modem from this post https://forum.xda-developers.com/showthread.php?t=2684798
it is no longer showing invalid sim but At&T at bottom xD
djhulk2 said:
yes im getting modem from this post https://forum.xda-developers.com/showthread.php?t=2684798
it is no longer showing invalid sim but At&T at bottom xD
Click to expand...
Click to collapse
now it showing at&t and t mobile, after clicking settings, network, mobile networks, select provider....but how do i choose this freedom pop network
djhulk2 said:
now it showing at&t and t mobile, after clicking settings, network, mobile networks, select provider....but how do i choose this freedom pop network
Click to expand...
Click to collapse
Fp uses the att network. Make an apn with fp.com.attz then download the fp messaging app. It should give you a notification of your phone number. If the connection is unstable, use another rom.
ok i will try again, i did all those steps without the modom. I installed the modom last and was on at&t...then i installed rom and said invalid sim xD so ill try again the right way. it should no longer say invalid sim any more at all right? and i dont need to select the gsm network or lte cmda? just once it shows at&t at bottom make the apn?
darksavior said:
Fp uses the att network. Make an apn with fp.com.attz then download the fp messaging app. It should give you a notification of your phone number. If the connection is unstable, use another rom.
Click to expand...
Click to collapse
so after an hour success. im connected to a network showing as H+ and internet working. im going back to darklord rom and hope sim still works
Qq on the darklord rom it says sim invalid. So i only got freedompop to work on the sprint stock rom
djhulk2 said:
Qq on the darklord rom it says sim invalid. So i only got freedompop to work on the sprint stock rom
Click to expand...
Click to collapse
Make sure you're on the correct bootloader and modem. It shouldn't say that anymore. As i said, you can also try the other tutorial that has a bit more stuff to edit in hidden menu. Use GT to access it.
You can try the regionlock away apk.
What darklord rom are you on? Darklord roms tend to be junk compared to the new note 7 ports.
Phronesis might work but I'm on a norma note 7 port, installed with tmobile option(not sure if that helps), and mobile networks I did not touch. It was set to auto (lte/3g/2g)
Ill try the tmobile option also, it doesnt have at&t option from install
So region lockaway didnt do anything, i try click unlock from gt and it asks for a code. I did the dial and domestic unlock but it also didnt do anything
Unless....i can only use 4.4 roms
I tried "FREEDOMPOP(CDMA sprint sim LTE)" on "MM 6.0.1 Darklord Modded V5 By JCordero31 N5N7 APPS 1/22/17" with MVNOBuzbee.zip
but it did not work. MVNOBuzbee.zip might need edited but i just decided to move on.
So then...is just this rom not working with or i need be on any 4.4 rom
djhulk2 said:
So region lockaway didnt do anything, i try click unlock from gt and it asks for a code. I did the dial and domestic unlock but it also didnt do anything
Unless....i can only use 4.4 roms
Click to expand...
Click to collapse
You are not on the correct bootloader or modem. That's why it got locked again. Also, you can't unlock on a LP rom, so you''ll get that window for a code. So let me repeat myself:
You have to be on NH7 and MJ4 and a 4.4 rom to unlock sim. you HAVE to stay on NH7 and MJ4 FOREVER in order for the sim unlock to stick. You don't have to stay on the 4.4 rom. NEVER flash a stock rom again since it will flash its own bl and modem, in your case, PH1.
You undid all your work by flashing a stock rom...
Ok i can live with that. So as long as modem and bootloader stay same...i can unlock, then flash any 4.4 rom and not have ti redo all this?