Sorry guys, thought we had one of these already.
Just curious about the V_2.3.1? Mostly the reception, but....
Is the Reception any better - mainly for those that have lousy reception to start with.
Are you having any issues?
I haven't heard anything yet so let me know :good:
I have decent reception at my house but I think the beta added a bar to it (from 3 to 4). Definitely better at my son's school. I was only getting 3g there but now get LTE. The big test will be at work but I'm on vacation and don't go back until next week.
I was so amazed that I actually noticed a better internet connection I never looked at my signal bars there is an extra bar or two in my house, which I swear I only had one if that all the time one thing is that I'm not sure if it is the ROM or me but shutdownani is really choppy, every since 2.2 but I try modules sometimes that make my phone unstable like xprivacy& cool tool which I immediately remove but deff noticed improved signals, like I actually see the difference
Updated to 2.3.1 to check apn, I checked apn setting. They didn't change, so I selected reset to default. Then I lost internet and apn kept selecting VM. On reboot phone app fc. Had to revert apn.config and do ##scrtn
jcfunk said:
Updated to 2.3.1 to check apn, I checked apn setting. They didn't change, so I selected reset to default. Then I lost internet and apn kept selecting VM. On reboot phone app fc. Had to revert apn.config and do ##scrtn
Click to expand...
Click to collapse
Did you use the ,DUN METHOD via master shortcut lite, hidden menu #2 4th on list, internet•, launch
Here is a screen shot. If I hit reset it will fill in the new apn added by 2.3.1 then my internet stops, and on restart phone app fc,
jcfunk said:
Here is a screen shot. If I hit reset it will fill in the new apn added by 2.3.1 then my internet stops, and on restart phone app fc,
Click to expand...
Click to collapse
You don't create a new one. You edit the top two. Just tap them and
add ,dun to the APN.
engine95 said:
You don't create a new one. You edit the top two. Just tap them and
add ,dun to the APN.
Click to expand...
Click to collapse
Yes, I already did that edit. 4 me in a specific area the 4G is slower than the 3G. I wanted to try different apns. But those APN would not connect for Sprint at all
What is the intended effect of that file? Sprint has its own APN on a profile update
Works Well for me, definitely see improvement with Switching from 3g to LTE. I also find an LTE signal much quicker. I work in NYC, before the 2.3.1 update I would struggle to get an LTE signal once I left Penn station, now As soon as I walk out it grabs a signal. engine95 you are the Man Bro.
@engine95
I think the apn.config has bad settings for Sprint OTA, I've edited going to test, should be able to activate phone with the edits.
jcfunk said:
Yes, I already did that edit. 4 me in a specific area the 4G is slower than the 3G. I wanted to try different apns. But those APN would not connect for Sprint at all
Click to expand...
Click to collapse
I'm not sure what you were trying to do prior to the above.
If you're talking the apn in the beta, It seems to work better for all of us.
If you're talking about modifying that apn for hotspot, it works also.
jcfunk said:
What is the intended effect of that file? Sprint has its own APN on a profile update
Click to expand...
Click to collapse
See above
jcfunk said:
@engine95
I think the apn.config has bad settings for Sprint OTA, I've edited going to test, should be able to activate phone with the edits.
Click to expand...
Click to collapse
The original, and the beta do the update profile/prl as they should. And "Activate device" is the telltale.
But, you can't use the beta on a fresh install. Meaning on a full ROM. It'll only work as an update.
Remind me again what issue you're trying to fix and I'll see if I can help.
Edit: In V3, it has a new zipalign binary that does what you want.
Did some testing, updating profile/prl works because it uses apn settings from activation, but if you do ##72786# which erases everything then reboots and does an activation using apn.conf.xml to connect to ota. But the setting don't work for ota. Crashes phone app and then only way to fix by wiping and doing clean install.
jcfunk said:
Did some testing, updating profile/prl works because it uses apn settings from activation, but if you do ##72786# which erases everything then reboots and does an activation using apn.conf.xml to connect to ota. But the setting don't work for ota. Crashes phone app and then only way to fix by wiping and doing clean install.
Click to expand...
Click to collapse
That would be right because it has to go through the setup all over again. Just like a clean, full rom install. And it can't find the apn it needs.
Yes, all that file is, is a hack. Not a fix.
Well I'm going to keep working on trying to make the hack safe,
The new native hosts file appears to be blocking random pictures in the play store. Not sure which URL is the culprit but I disabled the file temporarily and the pictures come back. Other than that v3 is running great. Thank you.
I didn't experience any data or APN issues, rom running good, battery real good, only thing I noticed, LEDs aren't working for any app, for me.
Visionikz03 said:
The new native hosts file appears to be blocking random pictures in the play store. Not sure which URL is the culprit but I disabled the file temporarily and the pictures come back. Other than that v3 is running great. Thank you.
Click to expand...
Click to collapse
I've seen that, too. It used to happen with the Mother of all Ad Blockers until that dev removed some entries. Some of the devs apparently host their images on sites that also serve ads.
Here's MoaAB if you're interested: http://forum.xda-developers.com/showthread.php?t=1916098
Visionikz03 said:
The new native hosts file appears to be blocking random pictures in the play store. Not sure which URL is the culprit but I disabled the file temporarily and the pictures come back. Other than that v3 is running great. Thank you.
Click to expand...
Click to collapse
Thanks.
That can happen. If they are too restrictive, then you might have to use the stock Sprint one.
joeyhdownsouth said:
I didn't experience any data or APN issues, rom running good, battery real good, only thing I noticed, LEDs aren't working for any app, for me.
Click to expand...
Click to collapse
Mine are but the timing is about 10 sec between blinks.
I guess check your settings, and maybe wipe cache and dalvic?
I just realized I don't have the native Wi-Fi calling app. Can I ##72786# from v 3.01 and get it to download or is that only on factory ROM?
Related
I can't use any app with mobile data, except for dolphin browser. But i can't download anything with them. And in apps like whatsup, google maps, google play store etc. it just says no connection. But when i'm connected to wifi i can use them with no problem. I was looking in the settings but i didn't find anything to fix it. Anybody has some idea?
Thank you.
I had something very similar after flashing a new ROM, Im now on leedroid with no problems so It might be the rom you are using?
unrooted stock rom :/ everything is stock
Try going to settings/phone update/update profile and see if updating your profile helps.
I don't have phone update in the settings :S
Sorry....it should be System Updates
It says that I already have the latest version... but everything worked, I don't know why this happened.
could go into phone programming and reset your data profile
##3282#, edit mode, enter your msl number, data profile, menu, restore.
this code doesn't work for me
I have a dumb question probably, but mobile network is checked in wireless and networks settings right ? And the mobile network settings are right, domestic data and voice should both be checked.
If all that is correct then i would take it to or call sprint and let them fix it. Sounds like an error on their side to me since your phone is stock.
Of course the settings are correct, because I can browse internet. And everything has worked until few days ago.. i don't want to bother with factory reset and that stuff, i'll just wait for ics to come.. if then something won't work then i'll contact htc...
If you go to the phone dialpad, ##3282# doesn't work, then something definately is wrong with your phone.
ycats said:
If you go to the phone dialpad, ##3282# doesn't work, then something definately is wrong with your phone.
Click to expand...
Click to collapse
I dont believe qpst is stock on the 3d. Can't remember tbh. Qpst is required to use ## codes.
Sent from my PG86100 using xda premium
QPST does work on stock. Also, since I work for sprint I would recommend just doing a master reset since this is the first thing they will do when you take it in. Yeah it sucks having to set everything back up, but it will probably fix your issue.
I've just resetted APN's and everything works now!
But I still don't understand why was browsing working, and apps wasn't :S
hrvoje334 said:
I've just resetted APN's and everything works now!
But I still don't understand why was browsing working, and apps wasn't :S
Click to expand...
Click to collapse
I was just about to suggest that the APN's weren't correct, or to reset them, so maybe an apology to the person you told "Of course all the settings are correct" !?!?
Simple fix anyway, glad it's working.
If you ever have a problem like this in the future, chances are it's a phone issue, then a network issue then a rom issue, but ultimately a human issue.
Resetting the phone can always rule out the rom, trying another sim can rule out the rom, calling your network can rule out the network, i get issues like this on a daily basis, it's 9 /10 human error.
Oh an just a heads up, quite a few people tried to help you here and you said thanks not once?
I bought my Evo4G LTE about two weeks ago and immediately rooted it. I have S-off with lazy panda and am running CM10 JB rom. Throughout the first week everything was running just fine. I could send and receive picture messages and MMS using both 3G and wifi. However over the past few days this has all changed. Whenever a picture comes in, either on 3G or wifi, the word "downloading" appears greyed out but the message never comes in. I have turned off and back on then back off automatic downloads. I have rebooted the phone, reloaded an earlier nandroid and nothing works. This happened all the time on my OG Evo 4G and I just wrote it off to "being the way it is". But honestly that isn't good enough with a brand new phone. I tried researching this and came up with someone saying to connect to Sprint Zone, which I cannot do because it is a stock app only and let the program troubleshoot for me. I downloaded an apk of this but it will not work.
If anyone has any help with this it would be much appreciated.
Have you tried updating ur profile and prl? I do that anytime and everytime I flash a new rom.....just a thought
vel7wil said:
Have you tried updating ur profile and prl? I do that anytime and everytime I flash a new rom.....just a thought
Click to expand...
Click to collapse
Profile and prl?
rersland613 said:
Profile and prl?
Click to expand...
Click to collapse
settings/system updates update both
bigdaddy619 said:
settings/system updates update both
Click to expand...
Click to collapse
I don't have a system updates tab on my settings drop down? Maybe I'm in the wrong spot?
rersland613 said:
I don't have a system updates tab on my settings drop down? Maybe I'm in the wrong spot?
Click to expand...
Click to collapse
you are looking in quick settings there is a settings icon in the upper right of the screen in the pull down on the notifications side
bigdaddy619 said:
you are looking in quick settings there is a settings icon in the upper right of the screen in the pull down on the notifications side
Click to expand...
Click to collapse
I did that. It is divided into 6 main sections: wireless and networks, interface, device, personal, accounts, and system. But I can't find anything about system updates. Again I am running CM10 Jelly Bean.
rersland613 said:
I did that. It is divided into 6 main sections: wireless and networks, interface, device, personal, accounts, and system. But I can't find anything about system updates. Again I am running CM10 Jelly Bean.
Click to expand...
Click to collapse
it's been a while since i've been on CM try looking in system
You need a sense Rom to update profile and prl
PHP:
om4 said:
You need a sense Rom to update profile and prl
Click to expand...
Click to collapse
Which sense rom do you suggest? So I need to keep one for backup on my phone and switch back over to CM10 after I update? I've only been getting one bar of cell service lately. Is this all pointing to the same issue? Would the prl still be the problem even when on wifi?
Any sense Rom, since its just for updates grab on of the basic stock roms from android development section. All the custom roms are a lot larger due to the various mods and extra stuff
om4 said:
Any sense Rom, since its just for updates grab on of the basic stock roms from android development section. All the custom roms are a lot larger due to the various mods and extra stuff
Click to expand...
Click to collapse
Went ahead and downloaded the stock rom with goodies. Went through settings and updated the prl and profile. Can anyone tell me what the correct prl should be or does it depend on your location? Btw thank you for helping me with this.
Mine is at 25006
I'm on the same prl then. I still don't know what's up. I always have 1 bar of signal and am very frequently on 1x instead of 3g. At the same time my wife will be on 3g with full bars on her iPhone. The part that gets me about not sending and receiving pictures is that I was on WiFi. Should it matter what profile and prl I'm on if I'm trying to receive data via WiFi?
Sent from my EVO using xda app-developers app
Well most ASOP roms have the issue of intermittent mms not downloading but with that said some sense roms don't allow mms over WIFI and some do. If you aren't connected to WIFI and you still can't download mms after profile and prl updates you can get your msl number and do a data reset and go through the process of reregistering your phone with sprints network and that should solve your issue.
Sent from my EVO using Tapatalk 2
I am new to root and ROMs so perhaps I overlooked a setting.
I just rooted my phone and flashed CM 10.2 a few days ago and I cannot get 4G anymore. I can only get 3G. I have tried a few fixes like dialing *#*#4636#*#* and adjusting the APN settings but nothing worked. I have the LTE button ON and I am wondering if I am still getting 4G because I have LTE on and it's just showing 3G. But I don't think that's the case.
Any help or tips would be greatly appreciated!
Sent from my SCH-I605 using xda app-developers app
xcharliemikex said:
I am new to root and ROMs so perhaps I overlooked a setting.
I just rooted my phone and flashed CM 10.2 a few days ago and I cannot get 4G anymore. I can only get 3G. I have tried a few fixes like dialing *#*#4636#*#* and adjusting the APN settings but nothing worked. I have the LTE button ON and I am wondering if I am still getting 4G because I have LTE on and it's just showing 3G. But I don't think that's the case.
Any help or tips would be greatly appreciated!
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
reflash stock rom. make sure you have 4g. flash the vram3c radio then flash cm10.2 rom. you should have no problems with 4g after that.
I will try that. Thanks!
Sent from my SCH-I605 using xda app-developers app
I tried flashing the radio and CM again and sometimes 4G comes up for a few minutes and goes back to 1X. This happens where I have gotten 4G before. Maybe the radio isn't as strong?
Sent from my SCH-I605 using xda app-developers app
xcharliemikex said:
I tried flashing the radio and CM again and sometimes 4G comes up for a few minutes and goes back to 1X. This happens where I have gotten 4G before. Maybe the radio isn't as strong?
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
My personal experience, living in a fringe signal area, is that AOSP roms just don't have as strong a signal as TW roms (it presumably has to do with how the RIL had to be hacked/reverse-engineered to work for AOSP). I would prefer running AOSP, but unfortunately in my experience on my S3 and Note2, where I am located on the fringe of full 4G coverage areas, I have the same issues as you: on TW, full, fast, 4G; on AOSP, very obviously slow 3G or 1X.
Edit to say I've only tried 4.2.2 ROMs, haven't tried the 4.3 ones yet, so if I'm handing out wrong/outdated info, I'd love to be corrected.
I am now running a stock 4.1.2 ROM and still cannot get 4G. I now for some reason can't even dial *#*#4636#*#*. When I try it just says "Welcome to Verizon Wireless, this call cannot be completed as dialed." Anyway to get that number to work so I can check my networks again?
xcharliemikex said:
I am now running a stock 4.1.2 ROM and still cannot get 4G. I now for some reason can't even dial *#*#4636#*#*. When I try it just says "Welcome to Verizon Wireless, this call cannot be completed as dialed." Anyway to get that number to work so I can check my networks again?
Click to expand...
Click to collapse
Try going into settings and factory reset phone now. If that doesnt work, reboot into stock recovery and factory reset from there and reboot. That seems to restore signal for those of us that got stuck in roaming mode from the Carbon thread. Might help your problem too
So I decided to re-flash CyanogenMod 10.1, adjusted the APN settings again, and I have 2 bars of 4G right now. Usually 4G will flash a couple times and change to 3G, but it is staying 4G, so hopefully it stays that way!
Well it stayed 4G for a bit until I turned WiFi on. The moment I turned it on, my 4G went to 3G. I turned WiFi off and I still have 3G. Anyone know what would cause this?
EDIT: My network type shows eHRPD with 3G, where as when I had 4G (before I turned my WiFi on) it showed LTE. If this helps any.
xcharliemikex said:
Well it stayed 4G for a bit until I turned WiFi on. The moment I turned it on, my 4G went to 3G. I turned WiFi off and I still have 3G. Anyone know what would cause this?
EDIT: My network type shows eHRPD with 3G, where as when I had 4G (before I turned my WiFi on) it showed LTE. If this helps any.
Click to expand...
Click to collapse
Where do you live, i know the mid Circle drive all the way over across platted to the airport are just dead zones. I lived on Verde drive and rarely had good signal, then when i moved up circle behind the bowling alley i never had a good signal. Just something about the antennae in that area. T-mo is a complete bust in that area. But i'm sure you probably all the way over on the Nevada side completely making what i said irrelevant.
dragonstalker said:
Where do you live, i know the mid Circle drive all the way over across platted to the airport are just dead zones. I lived on Verde drive and rarely had good signal, then when i moved up circle behind the bowling alley i never had a good signal. Just something about the antennae in that area. T-mo is a complete bust in that area. But i'm sure you probably all the way over on the Nevada side completely making what i said irrelevant.
Click to expand...
Click to collapse
I live right by Peterson AFB.
xcharliemikex said:
I live right by Peterson AFB.
Click to expand...
Click to collapse
Do a search on towers in your areas. If I remember correctly the closest tower to you in right by the interstate by the new (now not so new) MCD's in Security. That tower had alot of problems in the area past the Olympics complex all the way back to Peterson because of the radio towers for the Jets. I have been gone for almost 3 yrs so don't take what i say as truth tho. Just how it was when i was there.
dragonstalker said:
Do a search on towers in your areas. If I remember correctly the closest tower to you in right by the interstate by the new (now not so new) MCD's in Security. That tower had alot of problems in the area past the Olympics complex all the way back to Peterson because of the radio towers for the Jets. I have been gone for almost 3 yrs so don't take what i say as truth tho. Just how it was when i was there.
Click to expand...
Click to collapse
I will check that.
One LAST thing...after I edit my APN, my APN list is blank. I did a search but did not find anything.
xcharliemikex said:
I will check that.
One LAST thing...after I edit my APN, my APN list is blank. I did a search but did not find anything.
Click to expand...
Click to collapse
I've had that problem before. .I used a mod like this.
This mod is from DroidXcon, Try this and hopefully it will work. (make a backup of your buld.prop first)
Instructions:
1)Go to market install BuildProp Editor
2)Once installed find and open Build Prop Editor
3)Hit the menu button and select Edit
4)Scroll to the bottom of screen and add the following lines
Code:
ril.sales_code=LOL
ro.csc.sales_code=LOL
5)Hit the save button at the top right hand corner of the screen(looks like a disk)
6)Once this is done saving restart the phone
7)After restarting go to Settings>More Settings>Mobile Networks>Access Point Names>Menu Button>+ New APN
8)Add desired carriers APN info, when finished hit menu button and save
9)Power down and change to your desired SIM card if you hadn't already done so
10)Power back on and go to Settings>More Settings>Mobile Networks> Access Point Names (if done properly you should see the APN data you entered for your respective carrier).
11)Select the respective APN listing and then you should have working data
dragonstalker said:
I've had that problem before. .I used a mod like this.
This mod is from DroidXcon, Try this and hopefully it will work. (make a backup of your buld.prop first)
Instructions:
1)Go to market install BuildProp Editor
2)Once installed find and open Build Prop Editor
3)Hit the menu button and select Edit
4)Scroll to the bottom of screen and add the following lines
Code:
ril.sales_code=LOL
ro.csc.sales_code=LOL
5)Hit the save button at the top right hand corner of the screen(looks like a disk)
6)Once this is done saving restart the phone
7)After restarting go to Settings>More Settings>Mobile Networks>Access Point Names>Menu Button>+ New APN
8)Add desired carriers APN info, when finished hit menu button and save
9)Power down and change to your desired SIM card if you hadn't already done so
10)Power back on and go to Settings>More Settings>Mobile Networks> Access Point Names (if done properly you should see the APN data you entered for your respective carrier).
11)Select the respective APN listing and then you should have working data
Click to expand...
Click to collapse
I tried this but having the same problem, so I decided to save the APN each time I edited an item, and every time I would change the MNC and save, it would not be on my APN list, and it would be blank again.
Bump... also having this issue. Trying CM 10.2 for the first time since August. It had Bluetooth issues back then, so I've been running Bean's ROM until yesterday. Can't get 4G serivce in what is absolutely a saturated 4G area...
Was able to fix the issue by wiping the phone completely (including internal storage!), installing Bean's ROM, doing a factory reset, then coming back.
FWIW I always wipe internal storage when going back and forth between 4.1 and 4.2+ roms, seems to alleviate any SD card issues that can arise from the changes to filesystem in 4.2.
Ok so i have the tmobile sim in my verizon phone I am using the fast.T-Mobile.com apn settings I'm in a 4g area. My issue is my phone rapidly changes from h+ to 3g, to 4g lte and very seldom edge..... Fyi happens as I'm at work so I'm stationary. Data works but kinda lags at times. Any thoughts as to why or what to do??? And I have tried ipv4/6 and just each respectively. Thanks in advance.
If you are set on global try switching to lte gsm utms only and see if that helps
deron37129 said:
If you are set on global try switching to lte gsm utms only and see if that helps
Click to expand...
Click to collapse
I'll give it a go in the morning. Thanks will let u know if it works.
The stock lollipop Rom has an issue with syncing hangouts and gmail. In order to force sync,IPv6 is manually disabled every 1 minute. When that happens, your data connection resets, and you see your phone go up through the speed technologies.
jfsat said:
The stock lollipop Rom has an issue with syncing hangouts and gmail. In order to force sync,IPv6 is manually disabled every 1 minute. When that happens, your data connection resets, and you see your phone go up through the speed technologies.
Click to expand...
Click to collapse
Well that sucks lol. What would you recommend? I'd just like to stop cycling through the data 4g, 3g ect.
SBAKER24 said:
Well that sucks lol. What would you recommend? I'd just like to stop cycling through the data 4g, 3g ect.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=59514506&postcount=2921
This is probably what you seek, but a word of warning; I haven't tried any of this myself. I don't know whether this will work or break your phone. If I were trying to do this, I would probably just comment out that second line (put a '#' in front), but if you start getting sync problems, this will probably be why.
jfsat said:
The stock lollipop Rom has an issue with syncing hangouts and gmail. In order to force sync,IPv6 is manually disabled every 1 minute. When that happens, your data connection resets, and you see your phone go up through the speed technologies.
Click to expand...
Click to collapse
The thread you posted seems to,only refer to Wi-Fi issues and syncing.... I am not connected to Wi-Fi. I read that when they disconnect Wi-Fi there phones are fine with data..... Not sure I wanna delete anything like that off my phone when I'm not,sure off this will help. Of I went back to stock kk would I still have this issue?
SBAKER24 said:
The thread you posted seems to,only refer to Wi-Fi issues and syncing.... I am not connected to Wi-Fi. I read that when they disconnect Wi-Fi there phones are fine with data..... Not sure I wanna delete anything like that off my phone when I'm not,sure off this will help. Of I went back to stock kk would I still have this issue?
Click to expand...
Click to collapse
Theoretically you won't still have this problem if you go back to KK. I haven't gone back to KK since I took the plunge into LP, so don't quote me on that. In fact, if you just install the stock LP ROM, you won't have this problem any more as well.
OR, you could install Jasmine 5.0, and then upgrade it to something like 5.0.7 or 5.0.8, which ever one was before the IPv6 fix started getting baked into the Rom. That's probably what I would do, but I haven't tried SkyDragon yet, so I don't know what I'm missing.
jfsat said:
Theoretically you won't still have this problem if you go back to KK. I haven't gone back to KK since I took the plunge into LP, so don't quote me on that. In fact, if you just install the stock LP ROM, you won't have this problem any more as well.
OR, you could install Jasmine 5.0, and then upgrade it to something like 5.0.7 or 5.0.8, which ever one was before the IPv6 fix started getting baked into the Rom. That's probably what I would do, but I haven't tried SkyDragon yet, so I don't know what I'm missing.
Click to expand...
Click to collapse
Think I'll give jasmine 5.0 a spin. I noticed there is a 5.0.11 changelog says disable the 10 and 1 minute ipv6 not sure if I should try it out or not :/ http://forum.xda-developers.com/showpost.php?p=59517503&postcount=2929
SBAKER24 said:
Think I'll give jasmine 5.0 a spin. I noticed there is a 5.0.11 changelog says disable the 10 and 1 minute ipv6 not sure if I should try it out or not :/ http://forum.xda-developers.com/showpost.php?p=59517503&postcount=2929
Click to expand...
Click to collapse
If you don't like the Edge > 3G > H+ > LTE, don't use 5.0.11, I'm on that, and it happens to me. I'm also Unlocked and on the T-Mobile network, just like you. It didn't happen to me at all before the IPv6 stuff started going into the Rom. And I also didn't have any sync issues.
jfsat said:
If you don't like the Edge > 3G > H+ > LTE, don't use 5.0.11, I'm on that, and it happens to me. I'm also Unlocked and on the T-Mobile network, just like you. It didn't happen to me at all before the IPv6 stuff started going into the Rom. And I also didn't have any sync issues.
Click to expand...
Click to collapse
Trying to get Jasmine 5.0 installed how didbu go about it? Looks like I can't the normal twrp flash way. I'm looking into it now.
SBAKER24 said:
Trying to get Jasmine 5.0 installed how didbu go about it? Looks like I can't the normal twrp flash way. I'm looking into it now.
Click to expand...
Click to collapse
You'll have to follow the steps from the 5.0 post. Extract the files to /sdcard/ and then do some shell commands in TWRP. Takes you out of your comfort zone a little, but it worked for me.
jfsat said:
You'll have to follow the steps from the 5.0 post. Extract the files to /sdcard/ and then do some shell commands in TWRP. Takes you out of your comfort zone a little, but it worked for me.
Click to expand...
Click to collapse
I just got it installed. It was a bit different but its up and running. Now i need to find the versions you said lol.
SBAKER24 said:
I just got it installed. It was a bit different but its up and running. Now i need to find the versions you said lol.
Click to expand...
Click to collapse
This one might be the one you're looking for. And you can install is in TWRP like any normal file
http://forum.xda-developers.com/showpost.php?p=59469705&postcount=2746
jfsat said:
This one might be the one you're looking for. And you can install is in TWRP like any normal file
http://forum.xda-developers.com/showpost.php?p=59469705&postcount=2746
Click to expand...
Click to collapse
Perfect!!! Thanks. I got it loaded up now i am getting all my data back up on the phone.
I really need some assistance ASAP on this one, folks. My phone/text is not working at all ever since I did the following stupidly today.
I tried to see if there was an option to get 2G/3G/4G working on the VS985 on 7.0. Guess I shouldn't have been so curious.
The only real steps I took to see was going to: Settings>Fulmics Tweaks>Advanced>Hidden Menu>Modem Protocol>Changed to Automatic..........now I have NO talk/text. Only 4G LTE data. Does anyone know what I'm referring to here? How do I get back to the original settings which worked fine!?
There must be a way out of this mess.
EDIT: there is! seemingly random combo led me to a solution.
Under the phone settings for mobile network - network mode: select CDMA+LTE/EVDO, and under the access point names: use VZWINTERNET. Make sure both of those are also the same in the hidden menu as well as selecting AUTO under Modem Protocol. That seemed to fix it for me.
Mods can close this one up.
----
SOCOM-HERO said:
I really need some assistance ASAP on this one, folks. My phone/text is not working at all ever since I did the following stupidly today.
I tried to see if there was an option to get 2G/3G/4G working on the VS985 on 7.0. Guess I shouldn't have been so curious.
The only real steps I took to see was going to: Settings>Fulmics Tweaks>Advanced>Hidden Menu>Modem Protocol>Changed to Automatic..........now I have NO talk/text. Only 4G LTE data. Does anyone know what I'm referring to here? How do I get back to the original settings which worked fine!?
There must be a way out of this mess.
EDIT: there is! seemingly random combo led me to a solution.
Under the phone settings for mobile network - network mode: select CDMA+LTE/EVDO, and under the access point names: use VZWINTERNET. Make sure both of those are also the same in the hidden menu as well as selecting AUTO under Modem Protocol. That seemed to fix it for me.
Mods can close this one up.
Click to expand...
Click to collapse
Glad you got it figured out, do you have consistent 4g Data with Fulmics?
mopartonyg said:
Glad you got it figured out, do you have consistent 4g Data with Fulmics?
Click to expand...
Click to collapse
So far, so good. I haven't been to any areas with 3G coverage, but I hope to have that working as well now. I'm traveling halfway around the US this week, so it should make for a good test. Also installed Greenify - does voodoo magic for the battery life.
SOCOM-HERO said:
So far, so good. I haven't been to any areas with 3G coverage, but I hope to have that working as well now. I'm traveling halfway around the US this week, so it should make for a good test. Also installed Greenify - does voodoo magic for the battery life.
Click to expand...
Click to collapse
Thanks for the response, will give it a go later. Have a safe trip.
mopartonyg said:
Thanks for the response, will give it a go later. Have a safe trip.
Click to expand...
Click to collapse
Thanks! If the combo above doesn't work, you can also try auto under the hidden menu frequency, and auto (or global) in the phone APN settings if LTE/CDMA don't give you a good signal or only give you data but not voice. For some reason the phone APN settings may look different depending on what you have previously selected or when you reboot. The access point should always be VZWINTERNET and you should not change any of those values in either the hidden menu or the phone network menu.
Once you get it figured out, you should not have any further issues or need to tweak these values unless traveling internationally. If that is the case, check the LTE bands carefully 1st and adjust frequency 2nd.
I'd be extremely cautious about changing any of these values. If you make any mistakes, recovering can be a slow process as these are system level changes that will impact the phone - no matter what version of android, rom or nandroid backups you had previously - cannot override these changes. Also, screenshots won't help because the changes in the hidden menu aren't reflected in the UI.
SOCOM-HERO said:
Thanks! If the combo above doesn't work, you can also try auto under the hidden menu frequency, and auto (or global) in the phone APN settings if LTE/CDMA don't give you a good signal or only give you data but not voice. For some reason the phone APN settings may look different depending on what you have previously selected or when you reboot. The access point should always be VZWINTERNET and you should not change any of those values in either the hidden menu or the phone network menu.
Once you get it figured out, you should not have any further issues or need to tweak these values unless traveling internationally. If that is the case, check the LTE bands carefully 1st and adjust frequency 2nd.
I'd be extremely cautious about changing any of these values. If you make any mistakes, recovering can be a slow process as these are system level changes that will impact the phone - no matter what version of android, rom or nandroid backups you had previously - cannot override these changes. Also, screenshots won't help because the changes in the hidden menu aren't reflected in the UI.
Click to expand...
Click to collapse
Thank you again kind sir. Safe travels.
this working only werizon area?