I have a Gear S (Verizon) connected with my S5 (Verizon) and I am having some trouble in standalone mode. I have read a few threads and it seems that I should be able to receive SMS messages to my S5 on my Gear when in standalone (there is no problem when I am using BT). All of my calls are forwarding without problem. It also seems that I should be able to set my Gear to call using my S5 Phone number in standalone mode which I have been unable to do. Finally, I cannot stream through Milk while in standalone mode (once again I can connect through BT and control Milk on my S5). When standalone I get a cannot login error. I have replied in another thread about this, but I am hoping to get all my answers in one spot (I have not received an answer in that thread that has worked for me).
SteveO58 said:
I have a Gear S (Verizon) connected with my S5 (Verizon) and I am having some trouble in standalone mode. I have read a few threads and it seems that I should be able to receive SMS messages to my S5 on my Gear when in standalone (there is no problem when I am using BT). All of my calls are forwarding without problem. It also seems that I should be able to set my Gear to call using my S5 Phone number in standalone mode which I have been unable to do. Finally, I cannot stream through Milk while in standalone mode (once again I can connect through BT and control Milk on my S5). When standalone I get a cannot login error. I have replied in another thread about this, but I am hoping to get all my answers in one spot (I have not received an answer in that thread that has worked for me).
Click to expand...
Click to collapse
I was able to get the SMS problem resolved. It seems that if the WIFI connected on my S5 it will not connect to my Gear S remotely. Kinda crappy :crying:
It might be the WIFI at work is blocking something that is prevent the SMS from working. Going to retest when I get home.
I still have not figured out the Milk streaming or how to use my S5 number when making a call through the Gear. It does use my S5 number when sending SMS messages remotely.
Related
Can anyone with a note already AND a car system that uses Message Access Profile (MAP) check to see if it works with the note? This should allow systems like Ford Sync, to read and send SMS over the bluetooth.
The international version of the note doesn't work with BMW's connected office (SMS and email), voice and contacts sync just fine. I too am looking for a way to enable the MAP bluetooth profile on a note.
-Wally
Ah, I'll try it - I have an aftermarket head unit that started displaying SMS messages when I got my Photon 4G. I haven't paired it with the Note yet. From the post above mine it sounds like it might not work though.
Pops_G said:
Can anyone with a note already AND a car system that uses Message Access Profile (MAP) check to see if it works with the note? This should allow systems like Ford Sync, to read and send SMS over the bluetooth.
Click to expand...
Click to collapse
There are multiple iterations of Sync (varies vehicle and year) however on my 2011 Ford F150 Platinum it will not work.
Doesn't work for me either, but my JVC unit does work with my Photon so I assume it is a limitation of the phone. Not that I want to read txts while driving anyway.
Sent from my Samsung Galaxy Note
Does anyone else have any further information regarding MAP and the Note? I haven't been able to find much.
Any updates rom that supports this
Hockey37 said:
Does anyone else have any further information regarding MAP and the Note? I haven't been able to find much.
Click to expand...
Click to collapse
Any updates rom that supports this
So ive had thd gear for 2 days and im confused. When using my note 4, if i left the phone home i thougjt the watch woild act as tye same number etc when out and about. They tout that yoi dont have to give out a seperate number etc. Was i wrong on this account.
It should if the Gear S can connect to your phone remotely. There are know bugs that if you leave Gear WiFi on, it may not connect to your phone reliably.
How do connect remotely and shut the WiFi off. T-Mobile told me it wouldn't work
Suzook1 said:
So ive had thd gear for 2 days and im confused. When using my note 4, if i left the phone home i thougjt the watch woild act as tye same number etc when out and about. They tout that yoi dont have to give out a seperate number etc. Was i wrong on this account.
Click to expand...
Click to collapse
Did you enable call forwarding so when your bluetooth is out of range it will go into call forward mode ie calls/text from note 4 you want standalone use gear only mode
---------- Post added at 02:35 AM ---------- Previous post was at 02:26 AM ----------
Suzook1 said:
How do connect remotely and shut the WiFi off. T-Mobile told me it wouldn't work
Click to expand...
Click to collapse
51
Remote Connection
You can remotely connect the Gear S to the
smartphone when a Bluetooth connection
between the devices is not available. When this
feature is activated, you can receive notifications
from the smartphone and use apps that require
a network connection on the Gear S. For more
information, refer to “Connection Modes” on page
16.
1.
On smartphone
: Sign in to your Samsung
account.
2.
On smartphone:
Tap
Apps
>
Samsung
Gear
>
Settings
, and then tap
Use Remote
connection
per t-mobile manual
====================================================================
Forwarding Calls to Gear S
If you turn on Auto call forwarding, when Gear
S is in Remote Connection mode, calls to the
smartphone are automatically forwarded to the
Gear S. You can turn on Auto call forwarding
when you pair your Gear S with a smartphone,
in the Gear S Settings, or in Settings of the
Samsung Gear app on the smartphone.
When call forwarding is active:
•
Your smartphone will ring a few times for
an incoming call, and then the call will be
forwarded to your Gear S.
•
If you do not answer the call on your Gear S,
the caller may leave a voicemail that you can
listen to on your Gear S.
To use call forwarding, the Use Remote
connection setting must be enabled on the
Samsung Gear app on the smartphone (this is
enabled by default).
Call forwarding continues until your Gear S and
smartphone are connected again, via Bluetooth
or remote connection
Sorry have to ask the noon question, how do you forward. From the phone or the watxh
question to ask
See at bottom
QUOTE=Uniquebarbee;56735402]Did you enable call forwarding so when your bluetooth is out of range it will go into call forward mode ie calls/text from note 4 you want standalone use gear only mode
---------- Post added at 02:35 AM ---------- Previous post was at 02:26 AM ----------
51
Remote Connection
You can remotely connect the Gear S to the
smartphone when a Bluetooth connection
between the devices is not available. When this
feature is activated, you can receive notifications
from the smartphone and use apps that require
a network connection on the Gear S. For more
information, refer to “Connection Modes” on page
16.
1.
On smartphone
: Sign in to your Samsung
account.
2.
On smartphone:
Tap
Apps
>
Samsung
Gear
>
Settings
, and then tap
Use Remote
connection
per t-mobile manual
Do you mean galaxy apps on my note 4
====================================================================
Forwarding Calls to Gear S
If you turn on Auto call forwarding, when Gear
S is in Remote Connection mode, calls to the
smartphone are automatically forwarded to the
Gear S. You can turn on Auto call forwarding
when you pair your Gear S with a smartphone,
in the Gear S Settings, or in Settings of the
Samsung Gear app on the smartphone.
When call forwarding is active:
•
Your smartphone will ring a few times for
an incoming call, and then the call will be
forwarded to your Gear S.
•
If you do not answer the call on your Gear S,
the caller may leave a voicemail that you can
listen to on your Gear S.
To use call forwarding, the Use Remote
connection setting must be enabled on the
Samsung Gear app on the smartphone (this is
enabled by default).
Call forwarding continues until your Gear S and
smartphone are connected again, via Bluetooth
or remote connection[/QUOTE]
Suzook1 said:
Sorry have to ask the noon question, how do you forward. From the phone or the watxh
Click to expand...
Click to collapse
http://www.samsung.com/us/mobile/wearable-tech/SM-R750TZKATMB
Left side of the list last thing manual
OK got call forwarding enabled. Last question, if I make a call from the watch, its going to show up as the number assigmed to the watch though right, note my note 4
Suzook1 said:
OK got call forwarding enabled. Last question, if I make a call from the watch, its going to show up as the number assigmed to the watch though right, note my note 4
Click to expand...
Click to collapse
You can set it up for when you call from Gs To display note 4 number or Gs number . But if you are in gear only mode then yes you will call from the watch number
*yes samsung gear manager on note 4
how do you set that up?
THis review today states this:
Which means, if you set up automatic call forwarding, you can call your friends from your wrist and the call will appear to come from your regular phone number. But if you mistakenly share the direct phone number with your coworkers like I did, then all bets are off and your wrist is ringing at midnight. Protip: don't do that.
http://gizmodo.com/samsung-gear-s-review-but-i-dont-wanna-be-****-tracy-1658861223
When you BT connected to the phone, the cell radio on the watch is forced off. You can't receive SMS or calls from your watch number. All calls go straight to voicemail. This is true regardless if you setup auto call forwarding or not.
So, don't give out your watch number.
Well that's a bummer. I really wanted to make calls independent of the phone and have my main number show up
You still can. Just turn off the BT and let it remote connect to the phone. You trade off the battery life and a few features (that won't work without BT connection) for the sake of independent phone radio.
I do but when I make a call from the watch it comes up as my other number?
It can be configured on the watch for what outgoing number it shows.
I enabled call forwarding on the watch and gear managerband now if I'm out of range from the note 4 the watch connects remotely.
Then when I make a call or send a text it shows up on my wife's phone as coming from the Note 4 number and not the watches own number.
Just make sure that WiFi on the watch is switched off and call forwarding enabled on both the watch and in gear manager app.
jongilluley said:
I enabled call forwarding on the watch and gear managerband now if I'm out of range from the note 4 the watch connects remotely.
Then when I make a call or send a text it shows up on my wife's phone as coming from the Note 4 number and not the watches own number.
Just make sure that WiFi on the watch is switched off and call forwarding enabled on both the watch and in gear manager app.
Click to expand...
Click to collapse
Whenever I'm connected remotely, the outgoing call number is my watch's phone number and not my phone. When I'm connected via Bluetooth, it's the phone's number. I have played with the settings and have call forwarding on in both areas. My text messages show as my cell phone even when remotely connected just not outgoing calls. I'm getting a little frustrated as I want to leave the phone home sometimes and I don't want people to have a different number. I can't change this setting when connected remotely as its grayed out.
Jordan, look under phone settings when connected REMOTELY. You can choose what number to call from
Jeffruby said:
Jordan, look under phone settings when connected REMOTELY. You can choose what number to call from
Click to expand...
Click to collapse
I tried it. The number is set as my gear's number and it is grayed out so that I can't change it. Maybe this is a limitation of AT&T's network. It might not be able to place a call as another number remotely. This works for messages, just not for calls. This is somewhat disappointing as it negates the idea of not giving out another number when you leave your phone behind. If I ever call anyone, they will have no idea who it is.
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
nope...will only change if a) the gear network is on always ON or b) its on auto...and your not on wifi or bluetooth to phone...will work...
to get smart relay activated properly you must first turn on the mobile data connection on your phone then the mobile data connection on your watch. if the gear s has auto mobile data defaulted, in 60 seconds you will not have to activate it manually.
This method is to get the calls forwarded. Again, to establish the remote connection both phone and watch mobile data connections must be established. If youre connected to wifi the remote connection will not work.
Once call forwarding or remote connection has been established it is not necessary to keep the mobile data connections on either the phone or watch. The remote setup has been worked out through your cellular provider and there isn't a need to keep data on if you don't need them.
This must be done every time to get it working. I'm using both a tmobile bought gear S and note 4. It all works brilliantly.
if i have the phone and watch connected, and i receive a call, and answer it from the watch, will i speak from the phone? its easier to slide from the watch...
Hello I'm having great problems with remote connection. All I get is error message when I try to activate it. all it says is error has occurred please try again. I have note 4 and tmobile. I'm stuck and been researching for 2 days now. Any ideas?
bjh2379 said:
Hello I'm having great problems with remote connection. All I get is error message when I try to activate it. all it says is error has occurred please try again. I have note 4 and tmobile. I'm stuck and been researching for 2 days now. Any ideas?
Click to expand...
Click to collapse
Redo call forwarding setup both on gear manager and watch itself
Mine takes 2-4 tries to connect but after that its flawless
It has to have remote connection first to do the call forwarding
Any ideas?
A good reset/Uninstall the apps always helps me
Yeah tried. Nothing. Now its not recognizing my sim card
i get the same error forwarding calls when moving from BT to mobile connection. although the watch shows me the notifications, it keeps the error.try again.
how do i redo the call forwarding protocol on both devices?
bjh2379 said:
Yeah tried. Nothing. Now its not recognizing my sim card
Click to expand...
Click to collapse
Did ya fix it
BAD ASS NOTE 4 + BAD ASS GEAR S
No Data Plan
hughedee74 said:
to get smart relay activated properly you must first turn on the mobile data connection on your phone then the mobile data connection on your watch. if the gear s has auto mobile data defaulted, in 60 seconds you will not have to activate it manually.
This method is to get the calls forwarded. Again, to establish the remote connection both phone and watch mobile data connections must be established. If youre connected to wifi the remote connection will not work.
Once call forwarding or remote connection has been established it is not necessary to keep the mobile data connections on either the phone or watch. The remote setup has been worked out through your cellular provider and there isn't a need to keep data on if you don't need them.
This must be done every time to get it working. I'm using both a tmobile bought gear S and note 4. It all works brilliantly.
Click to expand...
Click to collapse
I am nor completely clear.....are you saying that each time you know you will be leaving your phone at home, you must manually set up Remote Connection and then turn it off when you reconnect to the watch via bluetooth? I thought is was supposed to be automatic. Also, does this Remote Connection require a data plan to allow it to function? I am in Canada and none of the carriers have a "wearable plan". I just purchased a prepaid nanoSIM from Rogers and signed up for a talk & text plan but no data and I don't want to be paying big $ for data if the watch requires data to function with Remote Connection. HELP!
Rick76 said:
I am nor completely clear.....are you saying that each time you know you will be leaving your phone at home, you must manually set up Remote Connection and then turn it off when you reconnect to the watch via bluetooth? I thought is was supposed to be automatic. Also, does this Remote Connection require a data plan to allow it to function? I am in Canada and none of the carriers have a "wearable plan". I just purchased a prepaid nanoSIM from Rogers and signed up for a talk & text plan but no data and I don't want to be paying big $ for data if the watch requires data to function with Remote Connection. HELP!
Click to expand...
Click to collapse
As far as I'm aware there are actually two separate issues to consider here.
1) If you turn on Call Forwarding in the Gear Manager app on your phone, then calls to your phone (using your phone number) will ring on your watch when not connected through Bluetooth (by being forwarded to your watch #). This is simply call forwarding and all you need is a watch plan that allows voice; no data plan required. You would normally use this when you want to leave the phone at home and receive calls on your watch while you're out, etc. The forwarding isnt automatic, you turn it on or off as required in Gear Manager.
2) If you have a plan that allows data (or have access to a wifi connection) then you will be able to receive texts and all notifications from your phone on your watch when connected remotely. You won't be able to receive calls in real time with only a data plan though, unless you also have a voice plan and forward calls as per #1 above. On the bright side, you will still get the missed call notification if your watch plan allows data, so while you can't answer the call you can always call them back right away. Data plans (or wifi) allow for the remote connection to your phone when out of bluetooth range. This remote connection is possible because without bluetooth, the phone and watch can only sync up through your Samsung account, which is why they need some sort of data connection. Once you've set everything up on your phone and watch, the remote connection will happen autonatically within 60 seconds of losing bluetooth connectivity.
Clearer Now
sefrcoko said:
As far as I'm aware there are actually two separate issues to consider here.
1) If you turn on Call Forwarding in the Gear Manager app on your phone, then calls to your phone (using your phone number) will ring on your watch when not connected through Bluetooth (by being forwarded to your watch #). This is simply call forwarding and all you need is a watch plan that allows voice; no data plan required. You would normally use this when you want to leave the phone at home and receive calls on your watch while you're out, etc. The forwarding isnt automatic, you turn it on or off as required in Gear Manager.
2) If you have a plan that allows data (or have access to a wifi connection) then you will be able to receive texts and all notifications from your phone on your watch when connected remotely. You won't be able to receive calls in real time with only a data plan though, unless you also have a voice plan and forward calls as per #1 above. On the bright side, you will still get the missed call notification if your watch plan allows data, so while you can't answer the call you can always call them back right away. Data plans (or wifi) allow for the remote connection to your phone when out of bluetooth range. This remote connection is possible because without bluetooth, the phone and watch can only sync up through your Samsung account, which is why they need some sort of data connection. Once you've set everything up on your phone and watch, the remote connection will happen autonatically within 60 seconds of losing bluetooth connectivity.
Click to expand...
Click to collapse
Thanks for the clarification. I currently only have the Talk & Text plan so I will have to see how much data is used to push the information. I may have to get a data plan as well.
Rick76 said:
Thanks for the clarification. I currently only have the Talk & Text plan so I will have to see how much data is used to push the information. I may have to get a data plan as well.
Click to expand...
Click to collapse
Happy to help. Also check out my post from the general thread to see my experience with trying to find a good weaeable-like plan here in Canada:
http://forum.xda-developers.com/showthread.php?p=58611081
So to further ask questions about these things..
I just got the watch today and have been searching and trying to find tips on it...
If I am connected via bluetooth.. why does my watch not ring? I thought I could pretty much leave my phone in my pocket all day and do everything through the watch (receive calls and what not). I notice the "messages" app ONLY has messages in there sent from the watch itself. If I get a text message I can view it (not reply..) and it does not show up on the actual watch texts... ideas?
Thanks in advanced.
Hey all,
I just have a question. Lets assume we do have a phone with SIM-A and the Watch with SIM-B. They are connected via bluetooth and for a reason, bluetooth connection get lost. Theoretically, the calls from SIM-A should be diverted to SIM-B. Automatically. Correct?
Because, practically, I am trying this with the Galaxy S7 edge with two sims (SM-G935FD) and it is not working. I got only missed-call notification. The call is not diverted and the phone is still ringing. However, I can do it manually, which of course is not as advertised.
im looking to purchase a gear s unlocked brand new but everywhere i go to finda a demo or more info i cannot find one where i live even the staff are clueless even the ones working in the samsung store.
my questions are
1. if i put my phone sim into my gear s what functions can it do similarly on my phone if say i go for a walk without my phone? will whatsapp work?
2. does the gear s need to have your phone connected to the internet at home if you leave it there and go out for the day for full functionality? i read in order for gear manager to function the phone needs to be on and connected to a working connection (obviously the gear s will have my sim in it o i assume calls etc i'll receive via the watch)
3. is the watch truly stand alone for calls texts whatsapp etc if i just put my phone sim in it and go out for the night?
my ideal scenario is if i want to go out for the night and dont want to bring my phone wih me im hoping i can receive calls texts and whatsapp only by just having my phone sim in the watch. is this doable? or does my phone need to be connected in some way?
thanks
Yes. If you put your sim in the watch you will get phone calls and txt. You can txt back just like normal. Not sure about whatsapp because I don't use it. You do have to have a Samsung phone to get emails and other notification type stuff and the phone has to be connected to wifi for that to work. It makes a remote connection using network via wifi with phone and cell network with the watch.
Sent from my iPhone using Tapatalk
So can i leave my phone at home connected to wifi and receive calls and texts from that number pushed to the gear s and also receive calls and texts on the separate sim i have in the watch?
If i put my phone sim in my gear s can i literally get everything i need pushed?
Sorry your post answered my question above. But in regards to whatsapp calling or viber on the gear s can i do that from the watch? How loud is the loud speaker? Like if im outside and it is noisey with traffic can i still hear without needing to put the watch close to my ear?
Lastly is it possible to sideload android wear fitness apps to it even though it runs tizen?
I like i can put a sim in unlike the s 2
Hi, sorry if this has been answered previous but I can't see it. I've had a gear s before and recently purchased a new one however I'm sure the last one I had I was able to receive notifications on the watch even when my phone was not on me, I don't seem to be able to get this to work on my new one. Also my gear s won't allow me to set up the call forward from mobile feature so I can only receive calls and notifications while Bluetooth is connected. The only thing I can think I've done differently this time around is taken out a SIM on a shared plan rather than the SIM having it's own data allowance. Anyone got any ideas what I'm doing wrong?