Hello, i just got myself a pmp7280C 3G Quad aka Prestigio Multipad 4
I've successfully rooted the stock 4.2.2 (kernel: 3.4.5) using a Chinese rooting method, then installed SuperSU
I want to install CWM on it but i can not get into flashmode I have tried clicking the reboot to flashmode button in RKAndroidTool.exe with a reply Device can not do Flash Mode, because of no drive) and holding the power up button gets me into recovery not flashmode while playing with holding the buttons down i managed to get into a service menu (in Chinese) and it showed up as CDC Serial in device manager
Is it even possible to install CWM on this tablet/phone ( it is a tablet with phone&sms functions ) if so how?
--------------EDIT---------------------
factory mode looks like this:
imageshack.com/a/img15/4442/t8is.jpg
Thanks Radek
I have videocon A15 rooted phone with Android 2.3.6(Gingerbread), Rom 512 mb,Ram 256 mb.I successfully rooted my phone via eroot.My problem is, doesn't work clockwork recovery (volume down power button) mod, but this method work perfectly before when I don't update clockwork mod CWM version 5.5.0.4 & 6.0.2.8 via Mobile uncle tool.
When i face this problem i don't go to recovery mod via mobile uncle tool, rom manager, flashify,(reboot into recovery) or volume down power button, all those methods are not working, also factory data reset not working in settings menu.Its only shows videocon logo (hang), then i removed battery & switched on.
Now what I will do,Please help me.
Hi all,
Just need some help with my tablet yes I know its a old bone lol.
I rooted this device and have successful installed CWM on it but after the last install (cyanogen) I seen to have bricked the touch screen.
The tablet boots fine into the Rom but the touch screen is not active.
If I try to access CWM it will not boot into recovery (hold volume up and power) so I have no way if attempting to install another ROM what can I do???
Any help is very appreciated
Stu
Someone please post How to flash infocus m2 3g mobile...
I am stuck in bootloop...
I cannot goto recovery mode... because i flashed it with CWM from(find the link in text file in attachment) using mobileuncleTools.apk(both are available in attachments)...after this only I got this problem...
I can only getinto Fastboot mode only...(tried with combination of Vol+ and Power Button while putting the usb cable)
I tried with Vol- & Power button combination... Still BootLoop
I tried SP FlashTool but always says timeout....
Its a Locked Bootloader so cannot flash anything via fastboot mode...It always says "Security Deny - Err:0x2017"
and I tried to Unlock Bootloader by Entering command "Fastboot -i 0x0489 oem unlock"... its also failed and result is "Unknow Command"
Please some on Tell me How to Entirely Flash with Locked Bootloader.......
HI
TigerDhana017 said:
Someone please post How to flash infocus m2 3g mobile...
I am stuck in bootloop...
I cannot goto recovery mode... because i flashed it with CWM from(find the link in text file in attachment) using mobileuncleTools.apk(both are available in attachments)...after this only I got this problem...
I can only getinto Fastboot mode only...(tried with combination of Vol+ and Power Button while putting the usb cable)
I tried with Vol- & Power button combination... Still BootLoop
I tried SP FlashTool but always says timeout....
Its a Locked Bootloader so cannot flash anything via fastboot mode...It always says "Security Deny - Err:0x2017"
and I tried to Unlock Bootloader by Entering command "Fastboot -i 0x0489 oem unlock"... its also failed and result is "Unknow Command"
Please some on Tell me How to Entirely Flash with Locked Bootloader.......
Click to expand...
Click to collapse
Link gives CMW recovery for Infocus M2 ..not for 3g
of course infocus m2 3g is factory locked bootloader...so u cant flash recoveries
wait any unlocker
hi vivek has ur problem with m2 being solved?
hi all
thanx to all of u guys at xda i was able to get my infocus working again.here's what i did:-
1) downloaded stock ROM from needrom.com the one m mentioning here by the name @"LSO-2260-0-00WW-A02-update"
2) transfer it in the root of SD Card.
3)get into recovery mode,power hold alongwith volume increase and USB attached to PC.
4) The moing ment INFOCUS logo comes up leave the power buttton.
5)keep the volume increase pressed untill recovery screen pops up(you'll be able to make out it's recovery coz of the deceased android logo with exclamation mark in it's chest) or the screen changes color,if nothing comes written on the screen after recovery screen comes( ie the deceased android logo with exclamation mark in it's chest) plz press the power button
6)recovery menu will definitely pop up.
7) select install from SD card.
8) select the zip file from the drop down menu and install.
9) reboot then and wait it''l set up the way it sets up for the first time.
10) mind it it was for the INFOCUS M2 3G INDIA version
rgds n once again thanx.
it says the scatter file is missing.what to do?
gauravinvouge said:
hi all
thanx to all of u guys at xda i was able to get my infocus working again.here's what i did:-
1) downloaded stock ROM from needrom.com the one m mentioning here by the name @"LSO-2260-0-00WW-A02-update"
2) transfer it in the root of SD Card.
3)get into recovery mode,power hold alongwith volume increase and USB attached to PC.
4) The moing ment INFOCUS logo comes up leave the power buttton.
5)keep the volume increase pressed untill recovery screen pops up(you'll be able to make out it's recovery coz of the deceased android logo with exclamation mark in it's chest) or the screen changes color,if nothing comes written on the screen after recovery screen comes( ie the deceased android logo with exclamation mark in it's chest) plz press the power button
6)recovery menu will definitely pop up.
7) select install from SD card.
8) select the zip file from the drop down menu and install.
9) reboot then and wait it''l set up the way it sets up for the first time.
10) mind it it was for the INFOCUS M2 3G INDIA version
rgds n once again thanx.
Click to expand...
Click to collapse
I downloaded the LSO-2260-0-00WW-A02-update from serioushackguid4u.blogspot.com for my Indian version.but it says the scatter file is missing.what should I do now?please send me the link
.
Bro...i rooted my Infocus M350 and then i ran a ota update..but atlast i get an error..then my phone was in bootloop..
then i installed cwm recovery mode through fastboot mode and flashes the stock rom(dwnloded from xda's site) and then lollipopupdate.zip..
But samething happens..the bootlogo was according to lollipopupdate.zip but still i was in a bootloop..then i reflashes the stock(kitkat.zip) and when i rebooted my phone then there was a lighted black screen with no symbols and no logo...but it is connecting to pc and fastboot mode can be accessed but android screen is blackened with nothing showing...plz help..i m in a big trouble and Thanks in Advance
Sent from my GT-S7582 using XDA Free mobile app
What help u need
my infocus m2 during a update getting error and now when i switch on the phone then the sign of infocus view and then after showing that sign its again swich off
please help what can i do .....
reply must
recovery mode 'no command''
Bro i have Infocus m2 3g version . I forgot my password then i was go to the recovery mode there are show's 'no command' pls help me thanxx in advance
krtbc11 said:
Bro i have Infocus m2 3g version . I forgot my password then i was go to the recovery mode there are show's 'no command' pls help me thanxx in advance
Click to expand...
Click to collapse
User mobile is cwm no comment found show on logo just press volume up button and down button press it two time your phone opended on cwm recovery
Is there is any way to update infocus m2 3g in a latest android version?????
plzz answer soon.
Hi guys. Please help me. . My m2 3g is already rooted. Then i download Software update lastnight. I install it but error. Then after a few minutes. My m2 is stuck in a logo and no command. I don't have a backup... I already tried to fix it in my pc. But not connected. Please help me. (sorry for my bad english) need help guys.
its showing invalid ota missing sctter file installation aborted error
what should i do please help me
i am also facing same problem so plzzz send me that zip file or link for infocus m2 3g on my mail id "[email protected]" plzzz
[/YOUTUBE]
TigerDhana017 said:
Someone please post How to flash infocus m2 3g mobile...
I am stuck in bootloop...
I cannot goto recovery mode... because i flashed it with CWM from(find the link in text file in attachment) using mobileuncleTools.apk(both are available in attachments)...after this only I got this problem...
I can only getinto Fastboot mode only...(tried with combination of Vol+ and Power Button while putting the usb cable)
I tried with Vol- & Power button combination... Still BootLoop
I tried SP FlashTool but always says timeout....
Its a Locked Bootloader so cannot flash anything via fastboot mode...It always says "Security Deny - Err:0x2017"
and I tried to Unlock Bootloader by Entering command "Fastboot -i 0x0489 oem unlock"... its also failed and result is "Unknow Command"
Please some on Tell me How to Entirely Flash with Locked Bootloader.......
Click to expand...
Click to collapse
how to stop adds on infocus m2 3g as i am getting frequently on browsing on wifi
{reopen} infocus m2 4g need help
fastboot solution please.
fastboot boot cwm.img commang works but my device's bootloader stucks as it is showing download mode at left corner.
when i hold power button it simply restarts.
it isnt because of, i tried to flash that custom recovery .but my device is not permanantly flashable.
at that time it bricked and goes to a qualcomm qdloader something driver state.
when i overcome that problem , now i unable to go to cwm again.
before the problem of qdloader qualcomm driver ,my device easily accepts the cwm img . now it wont.
sorry for bad english
Hi Everyone,
This is my first post here. I don't have much idea about android systems so posting here.
My friend has some booting issue with his HTC OneX+.
The phone is not starting up (Stuck at boot- time HTC logo) and we are not able to enter into recovery mode using Volume Down Key + Power Button.
I want to know if its somehow possible to flash the complete device and install fresh android remotely using USB without entering into fastboot mode / recovery mode.
Thanks in Advance.
hi there, if you boot the phone into fastboot you can reflash recovery, after that you may need to adb sideload the rom and reflash the kernal