Related
BlackCherryS ROM is a combination of the four Super ROMs Available
Paranoid Android + AOKP + Cyanogenmod + MoKee =BlackCherryS
ScreenShot:
View attachment 2507561
View attachment 2507562
View attachment 2507563
View attachment 2507564
View attachment 2507565
View attachment 2507566
Video from This Rom :
Thanks to cobra11111
http://www.youtube.com/watch?v=t5d2tU3ZuGg&hd=1
Thanka to Troubadour666
little review too here , with xposed activated.
Features:
All in One Rom [PA, AOKP CM & MoKee]
* Latest Version Nightly Builds
* All Features from CM
* Parts from Slim Bean
* Parts from Carbon
* Parts from PAC-Man
* Of course KitKat 4.4
Not work:* You tell me
Changelog:
Press me
How to install:
* Download the ROM and GApps
* Reboot to Recovery
* Wipe data/factory reset
* Format System
* Flash the ROM and then GAapps
* Wipe Cache and Dalvik Cache
* Reboot your phone
* Enjoy
Download Link:
Mod Edit link removed
GAPPS:
gapps-kk-20131208.zip
My website:
Press me
Thanks to:
Cyanogenmod
AOKP
MoKee
Pa
Pac-man
Slimroms
Sent from my iPhone using Tapatalk
1st will try soon
Sent from my GT-N7105 using Tapatalk
Will also give it a whirl. Not very active in here but always nice to see new ROMs and devs pop in
Sent from my Note II using XDA Premium 4 mobile app
shingers5 said:
Will also give it a whirl. Not very active in here but always nice to see new ROMs and devs pop in
Sent from my Note II using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I tried and loved it, but there is one problem.
After flashing rom and gapps, i reboot it and instal titanium backup. However, after I finish to restore all my apps (only apps, not data) and reboot the phone again, then i get a message of " FC system UI, blame Tyler ", which i am not able to stop
Any recommendations to avoid tis problem?
mant thanks for the great rom
Woooow new ROMS pops up. Will give it a try
---------- Post added at 07:41 PM ---------- Previous post was at 07:38 PM ----------
Wich recovery is recomended for flash?
---------- Post added at 08:29 PM ---------- Previous post was at 07:41 PM ----------
I flashed it but no imei and no SIM?
pasil.pt said:
I tried and loved it, but there is one problem.
After flashing rom and gapps, i reboot it and instal titanium backup. However, after I finish to restore all my apps (only apps, not data) and reboot the phone again, then i get a message of " FC system UI, blame Tyler ", which i am not able to stop
Any recommendations to avoid tis problem?
mant thanks for the great rom
Click to expand...
Click to collapse
Try using a different gapps. The gapps in the Original Post is outdated..
---------- Post added at 02:50 PM ---------- Previous post was at 02:49 PM ----------
bihslk said:
Woooow new ROMS pops up. Will give it a try
---------- Post added at 07:41 PM ---------- Previous post was at 07:38 PM ----------
Wich recovery is recomended for flash?
---------- Post added at 08:29 PM ---------- Previous post was at 07:41 PM ----------
I flashed it but no imei and no SIM?
Click to expand...
Click to collapse
Don't use Twrp to flash. Use Cwm or Philz Touch Recovery for 4.4 ROMs.
OmegaBlaze said:
Try using a different gapps. The gapps in the Original Post is outdated..
---------- Post added at 02:50 PM ---------- Previous post was at 02:49 PM ----------
Don't use Twrp to flash. Cwm or Philz Touch Recovery.
Click to expand...
Click to collapse
I flashed with CWM but no baseband now
bihslk said:
I flashed with CWM but no baseband now
Click to expand...
Click to collapse
Go to the Google play store and download "SELinux Mode Changer".
Click the button, and reboot.
Tell me if it works.
@OP, could you please deodex next nightly? That it is odexed is the reason the themechooser is not working!
Gesendet von meinem GT-N7105 mit Tapatalk
OmegaBlaze said:
Go to the Google play store and download "SELinux Mode Changer".
Click the button, and reboot.
Tell me if it works.
Click to expand...
Click to collapse
Will try but one thing i forgot to mention is that im at 4.3 Knox bootloader
SELinux mode Changer dont work with Knox Bootloader
---------- Post added at 09:15 PM ---------- Previous post was at 08:55 PM ----------
Come On OP any idea?
bihslk said:
I flashed with CWM but no baseband now
Click to expand...
Click to collapse
many thanks
I used last PA Gapps, from Jan,11, but I have been using TWRP 2.6.31., which is already prepared for 4.4 ROMS (OSE, OMNI, Blackbean. Teamsec, etc work well)
This "blame tyler" issue used to happen with BAM and PROBAM Roms as well
pasil.pt said:
many thanks
I used last PA Gapps, from Jan,11, but I have been using TWRP 2.6.31., which is already prepared for 4.4 ROMS (OSE, OMNI, Blackbean. Teamsec, etc work well)
This "blame tyler" issue used to happen with BAM and PROBAM Roms as well
Click to expand...
Click to collapse
I dont know what you mean?
I flashed ROM with latest CWM without problem. But have no baseband?
pasil.pt said:
I tried and loved it, but there is one problem.
After flashing rom and gapps, i reboot it and instal titanium backup. However, after I finish to restore all my apps (only apps, not data) and reboot the phone again, then i get a message of " FC system UI, blame Tyler ", which i am not able to stop
Any recommendations to avoid tis problem?
mant thanks for the great rom
Click to expand...
Click to collapse
you should refrain from using TB to restore apps as thats your issue right. use a different restore/backup method as TB causes issues. its abvious one of the apps restored has caused this issue
bihslk said:
Will try but one thing i forgot to mention is that im at 4.3 Knox bootloader
SELinux mode Changer dont work with Knox Bootloader
---------- Post added at 09:15 PM ---------- Previous post was at 08:55 PM ----------
Come On OP any idea?
Click to expand...
Click to collapse
use philz recovery as twrp and cwm seem to have issues flashing the rom correctly. very latest cwm should be fine and i know philz is as thats what i used
shingers5 said:
you should refrain from using TB to restore apps as thats your issue right. use a different restore/backup method as TB causes issues. its abvious one of the apps restored has caused this issue
use philz recovery as twrp and cwm seem to have issues flashing the rom correctly. very latest cwm should be fine and i know philz is as thats what i used
Click to expand...
Click to collapse
Ok i will give it a try...
---------- Post added at 09:44 PM ---------- Previous post was at 09:41 PM ----------
Flashed Philz Recovery and get status 7 Version 6.0.3.1
bihslk said:
Ok i will give it a try...
---------- Post added at 09:44 PM ---------- Previous post was at 09:41 PM ----------
Flashed Philz Recovery and get status 7 Version 6.0.3.1
Click to expand...
Click to collapse
get latest philz recovery mate
i used it to flash not long before
shingers5 said:
get latest philz recovery mate
i used it to flash not long before
Click to expand...
Click to collapse
Downloaded latest and flashed. Now Rom is booting. I hope the baseband is there
---------- Post added at 09:51 PM ---------- Previous post was at 09:50 PM ----------
No still no baseband.and no sim pin.
I think im reverting back to stock
You could try plasma kernel from verizon section, works with t0lte. Have baseband with it, flashed with twrp 2.6.3.1 t0lteatt.
Gesendet von meinem GT-N7105 mit Tapatalk
Already flashing STOCK rom. I dont want to mess with those roms anymore.
Baseband should be there as usual and not being flashed separatly.
bihslk said:
I dont know what you mean?
I flashed ROM with latest CWM without problem. But have no baseband?
Click to expand...
Click to collapse
shingers5 said:
you should refrain from using TB to restore apps as thats your issue right. use a different restore/backup method as TB causes issues. its abvious one of the apps restored has caused this issue
use philz recovery as twrp and cwm seem to have issues flashing the rom correctly. very latest cwm should be fine and i know philz is as thats what i used
Click to expand...
Click to collapse
I agree maybe the issue is caused by TB.
I am able to restore all apps with TB, and everytyhing seems ok (baseband ok, no FC messages), but when a reboot the device again them the "FC System UI Balme Tyler" message comes up every second...
I will try to backup with another app
many thanks
bihslk said:
Already flashing STOCK rom. I dont want to mess with those roms anymore.
Baseband should be there as usual and not being flashed separatly.
Click to expand...
Click to collapse
You need to go back to stock to get imei and baseband back then flash ROM again with philz latest recovery. Flashing with philz after losing it won't get it back.
Sent from my Note II using XDA Premium 4 mobile app
TWRP 2.8.1.0 for SM-N910F (Note 4 International)
This is based on official TWRP release for Canadian model
It is repacked with a modified property file to match stock recovery for international version
I tested on my brand new Note 4 and it works as expected, at least on a quick check
known bugs:
- many to list (adb shell, MTP, USB storage...)
PhilZ Touch proper: http://forum.xda-developers.com/note-4/snapdragon-dev/trltexx-philz-touch-t2927930
Phil3759 said:
TWRP 2.8.1.0 for SM-N910F (Note 4 International)
This is based on official TWRP release for Canadian model
It is repacked with a modified property file to match stock recovery for international version
I tested on my brand new Note 4 and it works as expected, at least on a quick check
Click to expand...
Click to collapse
Isn't the TWRP v2.8.1.1 out for the T-Mobile version?
I installed that version on my Galaxy Note 4 (SM-N910F), and it seems to be working good so far.
Tom-Helge said:
Isn't the TWRP v2.8.1.1 out for the T-Mobile version?
I installed that version on my Galaxy Note 4 (SM-N910F), and it seems to be working good so far.
Click to expand...
Click to collapse
The only issue will be to flash asserted files
else, it should be ok
I could also start compiling from sources when ever I have time
Are you planning on releasing your custom recovery for note 4 any time soon?
H0rn said:
Are you planning on releasing your custom recovery for note 4 any time soon?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=56388388&postcount=5700
when an official Cyanogenmod recovery is out, you would be able to build PhilZ Touch too
Meanwhile, I have no time to play with Samsung kernel sources and build a device tree from scratch
Phil3759 said:
http://forum.xda-developers.com/showpost.php?p=56388388&postcount=5700
when an official Cyanogenmod recovery is out, you would be able to build PhilZ Touch too
Meanwhile, I have no time to play with Samsung kernel sources and build a device tree from scratch
Click to expand...
Click to collapse
Man its good to see you here. I will sorely miss your recovery but am also so glad you've joined the international n4.
---------- Post added at 09:58 PM ---------- Previous post was at 09:40 PM ----------
Tried 3 different downloads but every time I flash this with Cwm it fails
Edit
Never mind just extracted it and saw it was a tar file lol
Hello Sir, can you please build custom recovery for N910G too ?
Whoop, been waiting for recovery, will install after the weekend.
Thankyou!
Phil3759 said:
TWRP 2.8.1.0 for SM-N910F (Note 4 International)
This is based on official TWRP release for Canadian model
It is repacked with a modified property file to match stock recovery for international version
I tested on my brand new Note 4 and it works as expected, at least on a quick check
Click to expand...
Click to collapse
https://github.com/xiaolu/android_device_samsung_trlte (include kernel headers)
https://github.com/xiaolu/android_device_samsung_trhplte
Phil3759 said:
TWRP 2.8.1.0 for SM-N910F (Note 4 International)
This is based on official TWRP release for Canadian model
It is repacked with a modified property file to match stock recovery for international version
I tested on my brand new Note 4 and it works as expected, at least on a quick check
Click to expand...
Click to collapse
Cay you do this for SM-N910C? Plss.
Works perfect on my note 4 thank a lot.
Chenglu said:
https://github.com/xiaolu/android_device_samsung_trlte (include kernel headers)
https://github.com/xiaolu/android_device_samsung_trhplte
Click to expand...
Click to collapse
:good:
You force me to compile PhilZ Touch again
Will do later
Doesnt work for me. I have 910F but when i flash with odin and try to enter recovery i get into stock recovery :S
Hi, a custom recovery for N910G version please.
If I want to flash a zip sometimes get this error ( see screenshot ) . I play a Android Backup and flash the same zip it goes . What can i do?
Working great! THanks a lot!
Phil3759 said:
The only issue will be to flash asserted files
else, it should be ok
I could also start compiling from sources when ever I have time
Click to expand...
Click to collapse
Please give a little more explation what are "asserted files" ( word by word translation to german does not make sense)
The reason for that question is that I have flashed the Echoe rom (and the new kernel) for my 910F international N4 with the T-Mobile TWRP. Now I would like to understand whether this could cause any trouble when switching to your modified TWRP.
Many thanks & Best regards,
dingolino
Yup confirmed working. Just did nandroid backup and flashed couple zips. Thanks Phil!
Phil3759 said:
:good:
You force me to compile PhilZ Touch again
Will do later
Click to expand...
Click to collapse
:laugh:
Chenglu said:
:laugh:
Click to expand...
Click to collapse
Ooh its philz
---------- Post added at 09:59 PM ---------- Previous post was at 09:58 PM ----------
Now the question is will it work on tmobile n4
---------- Post added at 10:02 PM ---------- Previous post was at 09:59 PM ----------
Chenglu said:
:laugh:
Click to expand...
Click to collapse
Cant wait if i knew how to compile it i would
[Android5.0.2] Red Rice Note 4G TD / W version CM12 experience Third Edition by Syhost
I didnt created this rom, This rom made user from miui forum his name is Syhost.
LINK TO ORIGINAL THREAD: http://en.miui.com/thread-91779-1-1.html
Things not working:
1. Camera
Instructions:
Download http://www.mediafire.com/download/3fgtidcxp3gqm6d/cm-12-20150305-UNOFFICIAL-dior.zip.
Use a custom recovery to flash the zip
Wipe Data and Cache before rebooting.
Install Gapps
ENJOY
Version Information
Last Updated 2015-03-10
RESERVED
Thank you for sharing.
---------- Post added at 09:26 PM ---------- Previous post was at 09:25 PM ----------
Can custom camera be used instead?
No but he is trying to fix it so we must wait.
The other lollipop thread in this section is about the very same rom. :-/
Gps not working, anyone else with this problem ?
I think GPS is hit and miss but can be solved with a combination of reboots and wiping data.
Hello everybody.
I building a Noble Kernel, the first rooting support for Galaxy Note5.
But have some problem( random reboot, lack stability) and I have some personal reasons should stop development Kernel Noble.
Now I'm come back with SpaceX Kernel. Random reboot problems has been fixed, more stability!
Click to expand...
Click to collapse
SpaceX Kernel
Galaxy Note 5/S6 Edge+
SpaceX Kernel Features
BuiLd from latest Ramdisk & Official Opensource
Auto-Rooting
Auto BusyBox
SELinux set to permissive
Init.d support
Auto-Kill Knox/SecurityLogAgent
Deep Sleep fixed
Wifi pass forget fixed
Reboot on Android panics (Random reboot) fixed
Disable Samsung Rooting Restriction Feature & TIMA
Removed Some Unnecessary Samsung Security Stuff
Add DHA tweak - optimize memory managements
Bic as default TCP congestion control for best networking speed
Supported devices status
SM-N920C
SM-N9200
SM-N9208
SM-N920P
SM-N920R4
SM-N920T
SM-N920W8
SM-N902I
SM-G928C
SM-G9287C
SM-G928G
SM-G928F/I/C/L/S/K
SM-G928P
SM-G928R4
SM-G928T/W8
SM-N920CD (N920C Dual)
Download
[*]SpaceX Kernel v0.1 - Official
[*]SpaceX Kernel v0.2 - Test
[*]TEST: Random reboot fix (10/09/2015)
Flash Guide
IMPORTANT: Maybe help with reboot issue during call & random reboot
Wipe Cache & Dalvik-Cache or full wipe after flash Kernel
Click to expand...
Click to collapse
- Via Recovery custom
Enabled OEM unlock, then boot into Download mode
Download and install Phliz Touch Recovery HERE via Odin 3.10.7 (thank @arter97)
Copy Kernel (.zip) file to devices
Boot into Recovery, flash Kernel
Reboot
Update SU binary If asked (normal update)
Click to expand...
Click to collapse
- Via Odin
Enabled OEM unlock, then boot into Download mode
Flash Kernel via Odin 3.10.7
Reboot
Update SU binary If asked (normal update)
Click to expand...
Click to collapse
Donate to Me!!!
Noble Kernel
Noble Kernel Features:
- Base Samsung N920T/P opensource
- Supports N920T/N920P
- Auto-Rooting
- Auto BusyBox
- Auto-Kill SecurityLogAgent
- Deep Sleep fix
- Wifi pass forget fix
Download:
N920T: Noble_Kernel_Auto-Root_N920T_v0.1_Rebuid3.zip
N920P: Noble_Kernel_Auto-Root_N920P_v0.1_Alpha.zip
N920I/C/W8,.... & Noble Kernel v0.2 >>> Testing Area HERE
1) Enabled OEM unlock
2) Flash Noble Kernel via Odin 3.10.7
3) Reboot
4) Go to Google Play Store and install SuperSU or download and install SuperSU.apk HERE
5) Update SU binary If asked (normal update)
Phone is now rooted !!!
Click to expand...
Click to collapse
TWRP v2.8.7.1 N920T/P: http://forum.xda-developers.com/showpost.php?p=62524562&postcount=3
Vietnamese post - My blog: http://samfirm.net/post/127663940617/noblekernel-note5
XDA:DevDB Information
[Kernel] SpaceX Kernel - Auto Root/Busybox | Galaxy Note5/S6 Edge+, Kernel for the Samsung Galaxy Note 5
Contributors
Manh_IT
Source Code: https://github.com/ManhIT-CMB/SpaceX-Kernel-Exynos7420
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: 0.1
Beta Release Date: 2015-09-26
Created 2015-08-23
Last Updated 2015-10-03
Changelog
10/02/2015:
Add support devices: N920R4, G928F/I/C/S/L/K/T/W8
SpaceX Kernel v0.1 - 09/27/2015:
Add support devices: N920I, N920CD, N9208, N920W8
SpaceX Kernel v0.1 - 09/26/2015:
Add support devices: N920C, N9200, N920T
Bic as default TCP congestion control for best networking speed
SpaceX Kernel - 09/25/2015: Start project SpaceX Kernel
Noble Kernel v0.1 - Aug, 27 2015: First beta release
TWRP Recovery Project For Galaxy Note 5
TWRP v2.8.7.1 N920T/P: https://www.androidfilehost.com/?fid=24052804347802037
N920A root please
Pre-Root for N920T if that is possible?
N920P if possible as well
Sent from my SM-N920P using XDA Free mobile app
almony8 said:
N920P if possible as well
Sent from my SM-N920P using XDA Free mobile app
Click to expand...
Click to collapse
+1
mocsab said:
Pre-Root for N920T if that is possible?
Click to expand...
Click to collapse
this
n9200(hong kong) root please
http://www.sammobile.com/firmwares/download/53195/N9200ZHU1AOH3_N9200ZZH1AOH3_TGY/
I'm on SM-N920I. Ready to test anything....
I am working...
http://www.theandroidsoul.com/download/n920tuvu1aoge-oge-firmware/
T-Mobile firwmware
Will test root as soon as you upload.
Thanks
sml2004 said:
+1
Click to expand...
Click to collapse
+2
Sent from my SM-N920P using Tapatalk
N920I
Waiting for N920I ...
http://imgur.com/ZRDB9fN
N920W8 please =). It's a Canadian model
I am on the SM-N920A as well. You will be a God to me if you can do it. It's been 5 days without root and I'm going crazy!
17akota said:
I am on the SM-N920A as well. You will be a God to me if you can do it. It's been 5 days without root and I'm going crazy!
Click to expand...
Click to collapse
It's not safe rooting the att and verizon version. The phone doesn't boot afterwards.
Sent from my SM-N920T using Tapatalk
---------- Post added at 04:59 PM ---------- Previous post was at 04:56 PM ----------
Waiting on 920T.
Can anyone confirm P working for Sprint users?
Sent from my SM-N920T using Tapatalk
charlieb620 said:
It's not safe rooting the att and verizon version. The phone doesn't boot afterwards.
Sent from my SM-N920T using Tapatalk
---------- Post added at 04:59 PM ---------- Previous post was at 04:56 PM ----------
Waiting on 920T.
Can anyone confirm P working for Sprint users?
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
I've read about that, but I'm sure there's a way.
Sent from my SAMSUNG-SM-N920A using Tapatalk
charlieb620 said:
It's not safe rooting the att and verizon version. The phone doesn't boot afterwards.
Sent from my SM-N920T using Tapatalk
---------- Post added at 04:59 PM ---------- Previous post was at 04:56 PM ----------
Waiting on 920T.
Can anyone confirm P working for Sprint users?
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
Downloading now ill let you know. Wish me luck
sml2004 said:
Downloading now ill let you know. Wish me luck
Click to expand...
Click to collapse
Download the stock firmware just in case... Hoping the root works for you though.
Sent from my SM-N920T using Tapatalk
TWRP RECOVERY
GALAXY GRAND 2
Team Win Recovery Project 3.1.0.x
Official TWRP App
The official TWRP app is the first and only first-party app developed by Team Win for TWRP. Please bear with us as we work to fix any bugs and build out the features. The initial version of the app does not support flashing on the Pixel due to the Pixel's A/B partition layout. In addition, the app may not support finding and flashing images from external storage locations. We are working hard to improve these items and bring you more new features.
Download Links:
We recommend downloading the app from the Play Store.
If you do not have Play Store access, you may download the Official TWRP App here: https://dl.twrp.me/twrpapp/
How do I use the app?
When you first open the app, you will be greeted by a few options. First, you will need to agree not to hold us responsible for anything that happens to your device while using the app. You may also grant the app root permissions. The app will work without root, but some functionality like image flashing will be disabled. Lastly, you can opt into enabling InsightCore (more on this feature later).
Once you have passed this initial screen, you will be greeted with the app home screen where you can choose TWRP FLASH or NETWORK STATISTICS (more on the network statistics later). On the TWRP FLASH screen you will need to select a device. Once you have selected a device, the app will periodically check for new TWRP versions for the device that you have selected. The default interval is once per day, but you can tap on the settings icon in the upper-right to change the interval or disable the update check entirely.
If you enabled root access, you will see options for selecting an image and buttons for flashing the selected image to boot or recovery. Note that you should flash TWRP images to recovery. The boot image flashing is for flashing full boot images (not just kernel zImages) and should not be used for flashing TWRP.
ScreenShoot:
Bugs:
None
Stable
DOWNLOAD Link:
https://mega.nz/#!tUgxRI5b!XaTp_Ddurz4HlsuzmLme60IkUq9GwQMDpInii92dayU
Pls Don't Forget Thanks Button
Good work bro. ☺
hackako11 said:
Good work bro.
Click to expand...
Click to collapse
does it work for G7102 ??
Koko2017 said:
does it work for G7102 ??
Click to expand...
Click to collapse
no but ı can ported for SM-G7102
Ooops i almost flashed this. Didnt read that its for 7105 only. Can you port it to 7102? It would be great too. ?
hackako11 said:
Ooops i almost flashed this. Didnt read that its for 7105 only. Can you port it to 7102? It would be great too.
Click to expand...
Click to collapse
oke bro
Does It work for 7105L? By the way Where can I find the ODIN Version Because I don't have any Recovery
---------- Post added at 09:58 PM ---------- Previous post was at 09:25 PM ----------
Koko2017 said:
does it work for G7102 ??
Click to expand...
Click to collapse
You can find it here...
https://forum.xda-developers.com/showthread.php?t=3577631
ccortina said:
Does It work for 7105L? By the way Where can I find the ODIN Version Because I don't have any Recovery
---------- Post added at 09:58 PM ---------- Previous post was at 09:25 PM ----------
You can find it here...
https://forum.xda-developers.com/showthread.php?t=3577631
Click to expand...
Click to collapse
https://forum.xda-developers.com/ga...recovery-twrp-2-8-7-0-touch-recovery-t3207764
Working bro ı make new TWRP for both grand 2
Hi please will this twrp work on grand 2 with model SM-G7108V. If no and any help to get twrp working on it will be much appreciated thanks
working link ?
ccortina said:
Does It work for 7105L? By the way Where can I find the ODIN Version Because I don't have any Recovery
---------- Post added at 09:58 PM ---------- Previous post was at 09:25 PM ----------
You can find it here...
https://forum.xda-developers.com/showthread.php?t=3577631
Click to expand...
Click to collapse
***
maybe you have a working link ?
that would be gret +++
hola que tal como debo instalarlo.....agradecería tu respuesta
Is there a newer version?
How to instal twrp without root and with original recovery?
Hi this work for the 7105H?
Hello guys also have a G7108V is there any custom rom I can use on the phone and a custom recovery as well
Any help is appreciated