hello,
i have Zenfone 5 (t00j)
Android KitKat,
so i accidentally got my phone boot looped, i tryed factory reset, wipe data/cache, still it doesn't work properly.
for some reason my pc cant recognize my phone, and because of that when i try to install the same firmware through adb
i get an error, because there's "no device connected"
i installed all the necessary drivers (expect "Asus usb driver" i have no idea how to install it)
please help me..
Shilo97 said:
hello,
i have Zenfone 5 (t00j)
Android KitKat,
so i accidentally got my phone boot looped, i tryed factory reset, wipe data/cache, still it doesn't work properly.
for some reason my pc cant recognize my phone, and because of that when i try to install the same firmware through adb
i get an error, because there's "no device connected"
i installed all the necessary drivers (expect "Asus usb driver" i have no idea how to install it)
please help me..
Click to expand...
Click to collapse
have you already solve this???
Related
Hello,
my device (i9300) as mentioned above got stuck in a boot loop.
First I did was I installed the latest pac-man ROM from here. After successful testing I decided to flash the latest OmniRom 4.4 from here.
Now here comes the dilemma with: My Failure was that I had a old Recovery (CWM-based Recovery v5.5.0.4) and I didn't see the point where it says that I have to update it first.
My USB Connection to my PC was already broken before I started to flash any of the ROMs. So I can't connect to the PC to flash via Odin. It fails on the driver installtion. (I copied everything in my cloud and downloaded it to the internal sd)
The Device Manager shows alwas a ! in a yellow triangle near the "Samsung Mobile USB CDC Composite Device" (Download Mode) with a errer code 10: Device cannot start. I did millions of solutions but nothing worked against this issue ...
Currently my device starts where the Samsung galaxy s3 logo pops up, get stuck by that with a red 1 on the upper left corner and boots into the "old" recovery.
This is my Problem. Please help me to fix this (and the USB bug).
Thank you very much
Kind regards,
A.R.Cante
A.R.Cante said:
Hello,
my device (i9300) as mentioned above got stuck in a boot loop.
First I did was I installed the latest pac-man ROM from here. After successful testing I decided to flash the latest OmniRom 4.4 from here.
Now here comes the dilemma with: My Failure was that I had a old Recovery (CWM-based Recovery v5.5.0.4) and I didn't see the point where it says that I have to update it first.
My USB Connection to my PC was already broken before I started to flash any of the ROMs. So I can't connect to the PC to flash via Odin. It fails on the driver installtion. (I copied everything in my cloud and downloaded it to the internal sd)
The Device Manager shows alwas a ! in a yellow triangle near the "Samsung Mobile USB CDC Composite Device" (Download Mode) with a errer code 10: Device cannot start. I did millions of solutions but nothing worked against this issue ...
Currently my device starts where the Samsung galaxy s3 logo pops up, get stuck by that with a red 1 on the upper left corner and boots into the "old" recovery.
This is my Problem. Please help me to fix this (and the USB bug).
Thank you very much
Kind regards,
A.R.Cante
Click to expand...
Click to collapse
To fix the USB bug, you must uninstall that driver and download the driver ( try to install kies for example )
To fix the bootloop try to do a full wipe in recovery mode
abidifethi said:
To fix the USB bug, you must uninstall that driver and download the driver ( try to install kies for example )
To fix the bootloop try to do a full wipe in recovery mode
Click to expand...
Click to collapse
None of your advices worked. I did unistall all drivers and also Kies. Reinstalled and it doesn't worked. So I uninstalled it again and installed only the drivers but this didn't worked too.
Everytime I uninstall the drivers and connect the device to the PC it is trying to Install the Drivers over Windows Update and Kies isn't reacting at all.
Now since I wiped data/factory reset, cache partition, dalvik cache and formated /system and /preload my device won't start automatically in the recovery anymore. It get stuck on the Samsung Galaxy SIII Logo with the red 1 in the upper left corner. To Access to the Recovery I have to take the battery out and and insert it again and press volume up + home + power.
What can I do now?
Thanks in advance
A.R.Cante said:
None of your advices worked. I did unistall all drivers and also Kies. Reinstalled and it doesn't worked. So I uninstalled it again and installed only the drivers but this didn't worked too.
Everytime I uninstall the drivers and connect the device to the PC it is trying to Install the Drivers over Windows Update and Kies isn't reacting at all.
Now since I wiped data/factory reset, cache partition, dalvik cache and formated /system and /preload my device won't start automatically in the recovery anymore. It get stuck on the Samsung Galaxy SIII Logo with the red 1 in the upper left corner. To Access to the Recovery I have to take the battery out and and insert it again and press volume up + home + power.
What can I do now?
Thanks in advance
Click to expand...
Click to collapse
Try to download any custom ROM if you don't done yet and put it in your external sd card ( use an other phone or card reader ) and now try to enter in recovery mode and install it and let us know the result
abidifethi said:
Try to download any custom ROM if you don't done yet and put it in your external sd card ( use an other phone or card reader ) and now try to enter in recovery mode and install it and let us know the result
Click to expand...
Click to collapse
I tried this now on my Desktop Computer and it worked fine. I didn't need to install drivers manually. It installed it by itself and therefore i was able to use odin!
I flashed the new recovery and put the omnirom and pa-gapps on my sd card (I also tried this on my notebook but my card reader is maybe broken)
so i installed teamwin recvovery over pc, put rom and gapps on my sd card and flashed them over recovery.
Now all works fine.
Thank you for your help.
But what I don't understand is my Win 7 OS (32 bit) is recently set up on my VM everything was fresh but it didnt recognized my device... Google says a lot of people are having this issues. I've tried everything whenever I found allegedly a solution for this problem. None of them worked. I simply switched the computer and everything is fine. This is ridiculous. One year ago, when I had running windows as main OS, there were no problems at all. If the problem was caused by a virtual machine I think that not many people would complain about this issue.
Kind regards
Why would old Win 7 recognize your device unless you install drivers .
JJEgan said:
Why would old Win 7 recognize your device unless you install drivers .
Click to expand...
Click to collapse
I don't really understand your comment. The Problem of this USB error has no root. When your Windows System says error code 10: device cannot start then you have a big problem because you don't know why and how to fix this. Try and Google this. You will find thousands of people complaining the same error. Everyone has other solutions for that. Some edit their registry, others simply do a soft-reset and try another USB-Port.
Samsung support can't help you at all because they don't know why this is happening. And the solving of this problem is really random. i tried for hours to solve this with no success (except switching to another computer).
Windows says on my laptop the device cannot start but it is perfectly connecting to my other computer. How can this happen? I don't know. Maybe the error code 10 is not that specific and there is something other wrong than my device.
Hello everyone. i got my Galaxy Ace GT-i5839i stuck on bootloop and i watn to flash the rom again from all over start because from the recovery i got a message after factory reset everything and when i press restart i got error saying ''cant mount / DataRebooting'' or something.
is there any fix for that besides the odin? i yes please tell me how. if no please tell me how can i get the proper drivers for this phone, i have tried everything and cannot do with the drivers, i got windows 7 and the computer recognises it correctly but at the drivers it installs ther is an exclamation mark and odin is not recognising it.
please any help to fix my phone.
thanks alot.
So my Asus Zenfone 2 551ML 4gb version is bootlooped, because i didn't know im not supposed to update when my phone is rooted.
I have tried to factory reset, wipe data and cache. Doesnt work.
I can't really flash rom, because my PC wont find my device through ADB (when i type ''adb devices'' in cmd, it wont show my device).
When im installing the USB Driver, it says it is supposed to take 2-3 min, i wait 30 min and its still installing drivers. Then when i go to the Intel ASUS USB Driver folder in Program Files, then i see the folder and theres files actually in it. so IDK... What should i do?...
hey guys...
My phone is in trouble and I tried to solve it but couldn't even after a day long struggle..So, I decided to post this thread!
I just installed the cwm recovery v6.0.4.5 through Odin..
And then I tried to install a custom ROM after wiping the system data,cache and dalvik cache...
But unfortunately when I did a system reboot it started booting into the cwm recovery...
And to my surprise Odin is no longer detecting the phone in the downloading mode...
When I checked the device manager I saw "Samsung Mobile USB CDC composite device" under the bus controllers and its drivers are not installed properly... So, I tried updating its drivers but I only get "This device cannot start .(Code 10)" error.
I installed kies to check if I have proper drivers installed but still Odin isn't detecting my phone.
So someone please step up and help me in recovering my phone..
Thanks,in advance!
My samsung galaxy grand quattro was bricked then i am upload the stock rom and it was successfully uploaded but one problem is there.. My phone is not start on battery life but it shows 100% if i connect the charger then my phone is started but after 10 to 15 seconds it is turning off.... How can i solve this problem...? Please help me.....
bbsankarreddy said:
hey guys...
My phone is in trouble and I tried to solve it but couldn't even after a day long struggle..So, I decided to post this thread!
I just installed the cwm recovery v6.0.4.5 through Odin..
And then I tried to install a custom ROM after wiping the system data,cache and dalvik cache...
But unfortunately when I did a system reboot it started booting into the cwm recovery...
And to my surprise Odin is no longer detecting the phone in the downloading mode...
When I checked the device manager I saw "Samsung Mobile USB CDC composite device" under the bus controllers and its drivers are not installed properly... So, I tried updating its drivers but I only get "This device cannot start .(Code 10)" error.
I installed kies to check if I have proper drivers installed but still Odin isn't detecting my phone.
So someone please step up and help me in recovering my phone..
Thanks,in advance!
Click to expand...
Click to collapse
Update drivers on your pc Odin will detect then after that, reflag stock os for battery either use battery cal liberator or most probably like my case Battery is dead
bbsankarreddy said:
hey guys...
My phone is in trouble and I tried to solve it but couldn't even after a day long struggle..So, I decided to post this thread!
I just installed the cwm recovery v6.0.4.5 through Odin..
And then I tried to install a custom ROM after wiping the system data,cache and dalvik cache...
But unfortunately when I did a system reboot it started booting into the cwm recovery...
And to my surprise Odin is no longer detecting the phone in the downloading mode...
When I checked the device manager I saw "Samsung Mobile USB CDC composite device" under the bus controllers and its drivers are not installed properly... So, I tried updating its drivers but I only get "This device cannot start .(Code 10)" error.
I installed kies to check if I have proper drivers installed but still Odin isn't detecting my phone.
So someone please step up and help me in recovering my phone..
Thanks,in advance!
Click to expand...
Click to collapse
your phone is not soft bricked....its just in a cwm loop.....
https://forum.xda-developers.com/showthread.php?t=2716953&page=4#post70376808
just check this thread.
it helped me
youre welcome:fingers-crossed:
Facing the same problem!
My Zenfone 4 Selfie(ZD553KL) is bootlooped, doesn't starts after the zenfone logo (restarts). I've tried adb sideload (it worked normally) the latest firmware, wiping all data including cache and nothing happenned. Asus FlashTool didn't recognize the smartphone in CSC fastboot mode. I guess it was because my USB debugging probably wasn't active. What can I do?
Firmware: 15.0400.1903.508
Not Rooted.
No Custom Recovery.
No OEM
EDIT: I managed to start the phone, but it keeps restarting a lot before proper start of the android (10min restarting until it starts). I've activated USB debbuging now, but still want to solve this.