So my Asus Zenfone 2 551ML 4gb version is bootlooped, because i didn't know im not supposed to update when my phone is rooted.
I have tried to factory reset, wipe data and cache. Doesnt work.
I can't really flash rom, because my PC wont find my device through ADB (when i type ''adb devices'' in cmd, it wont show my device).
When im installing the USB Driver, it says it is supposed to take 2-3 min, i wait 30 min and its still installing drivers. Then when i go to the Intel ASUS USB Driver folder in Program Files, then i see the folder and theres files actually in it. so IDK... What should i do?...
Related
I really Need Help! My computer wont recognize my tablet in fastboot mode, and my tablet wont read my micro SD card, also when i turn it on normally it stays at splash screen and when its plugged in to the computer the computer starts installing the drivers and it fails to install each time. I go to troubleshooting options and it states code 10. which states device cannot start.
I Have looked for ways around this, like manually installing the drivers, and my computer wont let me. Also the tablet can go to both: bootloader, and Clockworkmod recovery.
I factory reset my tablet so I cannot install anything, untill i get it to connect to my computer.
I am running Windows 7 64-bit on my computer!
Any help is very much appreciated!
Thanks!
NewDev4IOS said:
I really Need Help! My computer wont recognize my tablet in fastboot mode, and my tablet wont read my micro SD card, also when i turn it on normally it stays at splash screen and when its plugged in to the computer the computer starts installing the drivers and it fails to install each time. I go to troubleshooting options and it states code 10. which states device cannot start.
I Have looked for ways around this, like manually installing the drivers, and my computer wont let me. Also the tablet can go to both: bootloader, and Clockworkmod recovery.
I factory reset my tablet so I cannot install anything, untill i get it to connect to my computer.
I am running Windows 7 64-bit on my computer!
Any help is very much appreciated!
Thanks!
Click to expand...
Click to collapse
Did you install the naked driver from here? http://forum.xda-developers.com/showthread.php?t=1426502 if not do that first once you get that working... then you should be able to fastboot to the pc... next thing I would concider is going to twrp recovery instead of cwm....either go for an older version or go the full gambit of nvflash then install the latest twrp... after that you should be set.....I can comment more on it if you need it....
Bricked Tablet Help
Gage_Hero said:
Did you install the naked driver from here? http://forum.xda-developers.com/showthread.php?t=1426502 if not do that first once you get that working... then you should be able to fastboot to the pc... next thing I would concider is going to twrp recovery instead of cwm....either go for an older version or go the full gambit of nvflash then install the latest twrp... after that you should be set.....I can comment more on it if you need it....
Click to expand...
Click to collapse
I tried installing those drivers but it didnt work
also i used WSG_Unbricker v.1.0.3
my system is wiped
is there any way to install the operating system on it
i need a link for an update.zip
thanks
i can now only go to fastboot mode and wipe data mode.
NewDev4IOS said:
I tried installing those drivers but it didnt work
also i used WSG_Unbricker v.1.0.3
my system is wiped
is there any way to install the operating system on it
i need a link for an update.zip
thanks
i can now only go to fastboot mode and wipe data mode.
Click to expand...
Click to collapse
What do you see in device manager with the tablet plugged into the pc and running in fastboot?
Maybe this helps
I had a similar issue but my tablet couldn't be identified by windows, at first i thought it was my drivers so i tried to install new ones but windows wouldn't let me stating the same code 10. At the end it was a defective usb cable, i bought a new one and everything worked all right the first time i plugged it in. And by the way i was stucked at the CWM loop. Hope this helps and sorry for my bad english.
Bricked tablet
sj010489 said:
I had a similar issue but my tablet couldn't be identified by windows, at first i thought it was my drivers so i tried to install new ones but windows wouldn't let me stating the same code 10. At the end it was a defective usb cable, i bought a new one and everything worked all right the first time i plugged it in. And by the way i was stucked at the CWM loop. Hope this helps and sorry for my bad english.
Click to expand...
Click to collapse
Thanks
Im not sure if it is a bad usb cable, i think it is my computer because my computer doesnt even recognize my iphone and i have itunes installed,
i think it is partially due to a funky computer for me.
BRICKED
Gage_Hero said:
What do you see in device manager with the tablet plugged into the pc and running in fastboot?
Click to expand...
Click to collapse
It says fastboot
I sent my tablet in to asus
just waiting on them to reply
hello,
i have Zenfone 5 (t00j)
Android KitKat,
so i accidentally got my phone boot looped, i tryed factory reset, wipe data/cache, still it doesn't work properly.
for some reason my pc cant recognize my phone, and because of that when i try to install the same firmware through adb
i get an error, because there's "no device connected"
i installed all the necessary drivers (expect "Asus usb driver" i have no idea how to install it)
please help me..
Shilo97 said:
hello,
i have Zenfone 5 (t00j)
Android KitKat,
so i accidentally got my phone boot looped, i tryed factory reset, wipe data/cache, still it doesn't work properly.
for some reason my pc cant recognize my phone, and because of that when i try to install the same firmware through adb
i get an error, because there's "no device connected"
i installed all the necessary drivers (expect "Asus usb driver" i have no idea how to install it)
please help me..
Click to expand...
Click to collapse
have you already solve this???
hi everyone i have a 10.1 " chinese tablet on an mtk6592 cpu with 3gb ram running marshmallow . i left it plugged into my windows 10 pc that was having issues with its modified xeon cpu . basically my daughter unplugged it from the pc used it then switched t off overnight next day it hangs on android screen and doesnt boot . adb doesnt see it so im assuming usb debugging is switched off . fastboot sees it but wont flash it.
when i boot it into recovery mode nd run a test it states it has a missing xbin file and 3 modified files but my daughter swerars she didnt root it or touch anything. now when i try to apply update from sd card it goes into the os on the tablet but doesnt list any files on the sd card . i have since swapped out the xeon for an old quadcore chip and reinstalled an os but went with linux mint . now i can only see the device in fastboot but not in adb and i get a mount error when i try to connect to pc in anything but fastboot mode . im no pro but im pretty competent on pcs but ive literally zero experience on android flashing etc all ive tried so far is from 3 weeks of reading forums online but im no closer to solving my problem does anyone have any ideas what i can do on a linux os . ps flashtool doesnt recognise it as connected either.
thanks for any help in advnce
I am having same problem
Brother i am having same problem. But difference is that i did it bu mistake. I installed custom bootloader and custom recovery and usb debugging is off and now my phone is stuck at company logo. if you find and aolution please inform me too
sagarrathee77 said:
Brother i am having same problem. But difference is that i did it bu mistake. I installed custom bootloader and custom recovery and usb debugging is off and now my phone is stuck at company logo. if you find and aolution please inform me too
Click to expand...
Click to collapse
no worries dude i think my daughter knocked something on the computer because i had installed kingo root to root a couple of android boxes and it was open when i came back to my machine
strongbow235 said:
hi everyone i have a 10.1 " chinese tablet on an mtk6592 cpu with 3gb ram running marshmallow . i left it plugged into my windows 10 pc that was having issues with its modified xeon cpu . basically my daughter unplugged it from the pc used it then switched t off overnight next day it hangs on android screen and doesnt boot . adb doesnt see it so im assuming usb debugging is switched off . fastboot sees it but wont flash it.
when i boot it into recovery mode nd run a test it states it has a missing xbin file and 3 modified files but my daughter swerars she didnt root it or touch anything. now when i try to apply update from sd card it goes into the os on the tablet but doesnt list any files on the sd card . i have since swapped out the xeon for an old quadcore chip and reinstalled an os but went with linux mint . now i can only see the device in fastboot but not in adb and i get a mount error when i try to connect to pc in anything but fastboot mode . im no pro but im pretty competent on pcs but ive literally zero experience on android flashing etc all ive tried so far is from 3 weeks of reading forums online but im no closer to solving my problem does anyone have any ideas what i can do on a linux os . ps flashtool doesnt recognise it as connected either.
thanks for any help in advnce
Click to expand...
Click to collapse
Did you install mtk usb drivers? If not, try to install it for SP Flash Tool to recognize your device. I also got the same problem before but installing mtk usb drivers solved it. It's worth a try. Hit thanks if it helped you.
---------- Post added at 11:11 PM ---------- Previous post was at 11:03 PM ----------
sagarrathee77 said:
Brother i am having same problem. But difference is that i did it bu mistake. I installed custom bootloader and custom recovery and usb debugging is off and now my phone is stuck at company logo. if you find and aolution please inform me too
Click to expand...
Click to collapse
Install SP flash tool, install mtk usb drivers, download the correct rom for your device. The zipped rom should come with a 'scatter file' when unzipped. Run sp flash tool as administrator load scatter file then when sp flash tool reads your device (you can see it at the boottom of sp flash tool window), click download and wait for it to finish. That should solve to bootloop. Hit thanks button if it helped you.
Hello all.
I have hit a problem with my Hisense c20. I rooted using kingoroot and everything seemed to work fine. SuperUser was installed and working as it should. The phone then ran flat so I plugged it in and booted but it just hung on the SMART powered by android screen. So I restarted again into recovery mode and cleared system cache. Rebooted again but same thing. So tried again but with the wipe user data option. Still just hangs there. I then decided to try flash a stock rom via needrom. I followed the instructions but cannot seem to get the phone to be visible as a com port on Windows 7 64 bit. I have tried different cables and USB ports and reinstalled drivers countless times. Please could anyone assist me on getting this phone to be seen as a com port so I can flash it with QFIL.
Kind regards
Ryan
Ok so i managed to figure this out on my own. Basically what i did was plugged phone into pc while holding volume + and power. Phone showed up as Hisense in device manager, along with ADB device and USB composite device. I then right clicked on Hisense and uninstalled driver. Then i downloaded QCDLoader drivers and manually installed the driver via Have disk option and made sure to select the 9006 port driver package from the qcser.inf driver package. Once that was installed the phone was detected as a COM port. I then went into eMMC software download program in QPST and set the phone to download mode. Then back to device manager and saw QHUSB unidentified device. Right clicked that and went through same procedure as the 9006 driver except selecting the QCDLoader option instead of 9006 package. Phone then allowed me to flash Stock rom and was unbricked after a cache clear and system wipe. Took 3 days to figure it out but it worked. If anyone reading this is struggling with the same problem, let me know and i can go into more depth to try help. Really late and about to head off to bed.
Kind regards
Ruan
Need a file *qcn. or backup NV backup ?
Who has the opportunity to give?
[email protected]
[email protected]
RuanRex said:
Ok so i managed to figure this out on my own. Basically what i did was plugged phone into pc while holding volume + and power. Phone showed up as Hisense in device manager, along with ADB device and USB composite device. I then right clicked on Hisense and uninstalled driver. Then i downloaded QCDLoader drivers and manually installed the driver via Have disk option and made sure to select the 9006 port driver package from the qcser.inf driver package. Once that was installed the phone was detected as a COM port. I then went into eMMC software download program in QPST and set the phone to download mode. Then back to device manager and saw QHUSB unidentified device. Right clicked that and went through same procedure as the 9006 driver except selecting the QCDLoader option instead of 9006 package. Phone then allowed me to flash Stock rom and was unbricked after a cache clear and system wipe. Took 3 days to figure it out but it worked. If anyone reading this is struggling with the same problem, let me know and i can go into more depth to try help. Really late and about to head off to bed.
Kind regards
Ruan
Click to expand...
Click to collapse
Hi Ruan. You haven't found a custom recovery?
My Zenfone 4 Selfie(ZD553KL) is bootlooped, doesn't starts after the zenfone logo (restarts). I've tried adb sideload (it worked normally) the latest firmware, wiping all data including cache and nothing happenned. Asus FlashTool didn't recognize the smartphone in CSC fastboot mode. I guess it was because my USB debugging probably wasn't active. What can I do?
Firmware: 15.0400.1903.508
Not Rooted.
No Custom Recovery.
No OEM
EDIT: I managed to start the phone, but it keeps restarting a lot before proper start of the android (10min restarting until it starts). I've activated USB debbuging now, but still want to solve this.