I like using WidgetLocker and it's been working generally well until I realized it does not replace the default lockscreen. After my 3 minute screen timeout for my Droid 2 to lock up, I have to unlock using WidgetLocker and then the default lockscreen. Is there a way so that I do not see the default lockscreen itself? BTW, I am using a pattern lock.
I use an app called "no lock" and it works really well.
I'm the dev of WidgetLocker.
The issue you are experiencing is because the standard swipe unlock is tied to the pattern (and pin and password) security on Motorola phones. I haven't yet found a way around this. There's two methods I may use to solve this (possibly both options)
1) Implement security into WidgetLocker.
2) Use root to bypass the intermediate swipe unlock
The advantage of using the system's security is that it's for sure protected at phone boot, it's harder for a third-party-app to guarantee that. The advantage of WidgetLocker's own security is that it wouldn't require root (Then again maybe it would for at-boot protection) and would allow more options.
I don't know when I will have a solution to this, I just know it will NOT be in the next update. If you just purchased and this issue is causing you to not use WidgetLocker email me ([email protected]) with your order number (and mention this thread) and I can cancel/refund the order.
No Lock will disable your security. I don't remember offhand if LockBot Pro just completely bypasses the security or has the same issue, but it doesn't solve the problem.
Thread moved to General.
Alright, thanks guys for the good info. I'll continue to use WidgetLocker just because I like it that much, and I hope a solution can be found some time in the future. Thanks!
So, any updates? I'm now unlock homescreen 3 times ). Widgetlocker+Standart_SlideLocker+Pattern. Temporary removed widgetlocker.
[email protected] said:
I'm the dev of WidgetLocker.
The issue you are experiencing is because the standard swipe unlock is tied to the pattern (and pin and password) security on Motorola phones. I haven't yet found a way around this. There's two methods I may use to solve this (possibly both options)
1) Implement security into WidgetLocker.
2) Use root to bypass the intermediate swipe unlock
The advantage of using the system's security is that it's for sure protected at phone boot, it's harder for a third-party-app to guarantee that. The advantage of WidgetLocker's own security is that it wouldn't require root (Then again maybe it would for at-boot protection) and would allow more options.
I don't know when I will have a solution to this, I just know it will NOT be in the next update. If you just purchased and this issue is causing you to not use WidgetLocker email me ([email protected]) with your order number (and mention this thread) and I can cancel/refund the order.
No Lock will disable your security. I don't remember offhand if LockBot Pro just completely bypasses the security or has the same issue, but it doesn't solve the problem.
Click to expand...
Click to collapse
i know it's an old thread and problem, but i thought i'd just throw this idea out there...
my current security solution for Motorola phones (Droid X and Bionic) is to enable PIN security. this means that i do not have to depend on a third party app to lock my phone down at boot (which is difficult as you point out).
while using my phone at home, i temporarily disable the PIN security using Switchpro widget's "Auto ScreenLock" toggle (i think No Lock work too). when my phone is rebooted, the Motorola security is automatically active again, and i have to select Switchpro widget again to temporarily disable the PIN security if i choose, or i can leave it enabled if i'm at work or someplace else where the likelihood of losing my phone is increased.
unfortunately this means i can't really use WidgetLocker because whenever i' have PIN security enabled, i have to deal with the extra swipe of the stock lock screen. yes, the new feature for auto-swiping works and is cool, but it's a bit slow and awkward.
Possible solution: if WidgetLocker included a separate post-boot security PIN feature that was reasonably secure while the phone is on (and without disabling the stock security PIN), then i would be in heaven. this would allow me to leave system security PIN in place (protecting me during boot), i would have to swipe and enter my PIN twice the first time i enter my phone after boot (once for system PIN, once for WidgetLocker), then i could disable the system PIN via Switchpro widget (or No Lock) and only have the WidgetLocker PIN on subsequent attempts to unlock my phone until the next reboot. i used exactly this process on my Droid X with LockBot Pro, but LockBot Pro is not compatible with the Bionic.
is this description even remotely clear? i realize that it might be a confusing sequence for some folks, but it would totally address the issue of security during boot and post-boot while also being able to use this excellent app on Motorola phones.
just a thought...
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Hi,
I got the same problem as the threadstarter. Any progesses made? Teslacoil hompage says:
Can I use WidgetLocker with a security lockscreen?
Yes, but it depends on your configuration. Some devices force their own slider, before the security slider. This means WidgetLocker, then system slider, then system security. Generally Samsung and HTC devices don't have this issue, and other devices don't have this issue when using Pattern security rather than PIN or Password. WidgetLocker includes a work around for root users to "auto-swipe" the system slider.
Click to expand...
Click to collapse
On my Galaxy S2 this workaraound does not auto-slide the systemslider... What's wrong with it?
Have a Atrix 2 here and as PhilDX said, it is kinda slow and awkward. When I have the pattern security active and swipe the Widgetlocker lock, it kinda "flashes" my homescreen then goes to the pattern. Also, even though I have autoswipe enabled, but sometimes the original lockscreen pops up.
Great program though, LOVE that I can put widgets on the lockscreen^^
Hello, My phone is SGS2-GTI9100G model.
Can I ask any method to prevent exit active applications from the task manager?
I have a similar problem
[email protected] said:
I'm the dev of WidgetLocker.
The issue you are experiencing is because the standard swipe unlock is tied to the pattern (and pin and password) security on Motorola phones. I haven't yet found a way around this. There's two methods I may use to solve this (possibly both options)
1) Implement security into WidgetLocker.
2) Use root to bypass the intermediate swipe unlock
The advantage of using the system's security is that it's for sure protected at phone boot, it's harder for a third-party-app to guarantee that. The advantage of WidgetLocker's own security is that it wouldn't require root (Then again maybe it would for at-boot protection) and would allow more options.
I don't know when I will have a solution to this, I just know it will NOT be in the next update. If you just purchased and this issue is causing you to not use WidgetLocker email me ([email protected]) with your order number (and mention this thread) and I can cancel/refund the order.
No Lock will disable your security. I don't remember offhand if LockBot Pro just completely bypasses the security or has the same issue, but it doesn't solve the problem.
Click to expand...
Click to collapse
My (unrooted) Samsung Stratosphere's Default lockscreen keeps Activating and overriding WidgetLocker. WidgetLocker doesn't even show up or if it does it pops up after I've already unlocked the phone. I have tried setting WL homehelper as home but default still replaces it, then widgetlocker locks the screen at random while I'm in the middle of something. I also tried no lock which disabled all lockscreens temporarily before stock kicked in and locked the phone. is there a way to fix this without root?
I just wanted to throw this out there and see if anyone had any ideas. It's required by my device administrator policy to have a pin or password lockscreen but I hate it. Does anyone think it could be possible to take a simple lockscreen like one that requires a slide across the screen and replace the the standard pin lockscreen so that the device administration still thinks there is a pin?
My company requires me to protect my tablet with a password that includes both letters and numbers if I want to get my corporate email on it. The keyboard that the lock screen uses is the default android keyboard, even if I have a different keyboard (Swiftkey, in my case) selected as my primary input method.
This makes entering an alphanumeric password a pain, since I have to press the "?123" key to bring up the numeric keypad every time I need to enter a number.
Is there a way (without rooting, preferably) to use a different keyboard for the lock screen ... it doesn't have to be swiftkey, necessarily, I just need something that has either has a 5th row with numbers, or that allows the top (qwerty) row to bring up numbers with a long-press.
Any help would be much appreciated!
I'm currently using external SD card encryption, but that needs passcode protection.
So I've already set it up, and now I must input my password to release lockscreen.
Everything is OK.
When I turn on the screen, passcode box is appeared, BUT the keyboard is not appeared automatically until I touch the passcode box.
I must touch passcode box to activate keyboard.
That's very inconvenient, not like iPhone. (iPhone lockscreen is designed like what I want)
Is there any good way to solve this problem? (actually it's not a problem, but I mean, just any solution)
nope. it's a design flaw
Hi. When I received the phone, out of the box security was not enabled and I was able to unlock the screen only by sliding the pad lock UP on the lock screen.
This worked well for me as I could read all notifications while locked, without unlocking the phone.
I then tried out the other security methods including Pattern. Didn't like it and wanted to go back to slide to unlock.
Under Security there is not a Slide to Unlock option.
Now, if I leave it as No Security, anything unlocks the screen, even a tap.
How do I get the original pad lock Slide to Unlock feature back?
A hard reset?
Sorry if this has been answered before, I did a quick search and didn't find a thread.
Thanks.
Set it to wallpaper lockscreen. Personally I use productivity so my messages go on lockscreen
Btw option is under settings / personalization / lockscreen type
Sent from my HTC One using xda premium
Same Issue
Hello I am currently having the same issue with my lock screen. I hadn't even realized that switching the lock screen type was the reason, but it makes sense. Did you find a way to fix it? The above poster's method did not work for me.
Thanks for putting this problem in words!
So it looks like this is an issue that happens whenever you have an accessibility setting enabled as described here. This goes for any accessibility settings... Can someone confirm if this still happens with other Sense ROMs or if this only happens with stock?
http://forum.xda-developers.com/showthread.php?p=40407262#post40407262
Can't seem to find a fix for it though, hopefully with 4.2.2
Hi guys! Made a fix for this issue please refer to this thread.
http://forum.xda-developers.com/showthread.php?p=41744250
Please report if it doesn't work.