Hi, I'm looking for compatible roms for my htc evo 3d hboot 1.53.007 that is s-on.
Most of the customs roms that I'm looking for requires hboot 1.49 and I don't know how to downgrade my hboot to suit them.
Can anyone give me a list or link to these roms that doesn't require me to downgrade but just use 4ext?
gaara22 said:
Hi, I'm looking for compatible roms for my htc evo 3d hboot 1.53.007 that is s-on.
Most of the customs roms that I'm looking for requires hboot 1.49 and I don't know how to downgrade my hboot to suit them.
Can anyone give me a list or link to these roms that doesn't require me to downgrade but just use 4ext?
Click to expand...
Click to collapse
Any ICS Sense ROM will be fine. Just be sure to enable smartflash in recovery before you flash
donkeykong1 said:
Any ICS Sense ROM will be fine. Just be sure to enable smartflash in recovery before you flash
Click to expand...
Click to collapse
Thank you I'll check for some!
Related
running twrp 1.1.1 if it matters, and secondly, is it going to update my hboot?
My Shooter's still got hboot 1.4.
Radio 97.00.0518
I'm looking to get the stock ROM but keep recovery and s-off...
No1ustad said:
running twrp 1.1.1 if it matters, and secondly, is it going to update my hboot?
My Shooter's still got hboot 1.4.
Radio 97.00.0518
I'm looking to get the stock ROM but keep recovery and s-off...
Click to expand...
Click to collapse
There is a list of ROMs under Android Development thread (CDMA or GSM). You can downloaded official stock unrooted ROMs or stock rooted ROMs.
if you do it will change your hboot and relock your evo but you will still have s off and yes you will loos root but you can root it and regain s off by going through the steps at alpharevolutionary.io and reinstall your custom recovery aswell
jslim38 said:
if you do it will change your hboot and relock your evo but you will still have s off and yes you will loos root but you can root it and regain s off by going through the steps at alpharevolutionary.io and reinstall your custom recovery aswell
Click to expand...
Click to collapse
Thanks guys, think I'll just snag one from here http://forum.xda-developers.com/showthread.php?t=1420206
should allow me to keep root/recovery, right?
There you go now thats how its done go for it
Sent from my HTC EVO 3D X515m using xda premium
ICS
If you.want a taste of sense 4.0 check out.newtoroot's bets if your cdma
Hello.
I used the wire Trick.
My hboot Version is 1.53.0007
S-off.
I would like to downgrade my hboot to 1.49. And use revolutionary to unlock.
Can i downgrade to that hboot and flash newest Radio/ Firmware without Problems?
Why do i want to do that?
Becouse it is the only way to flash cm Roms.
After i do that can i flash ics custom Roms without Problems?
Does someone has a Download Link for 1
.49. Hboot ?
Sent Form my HTC EVO3D using my big fat fingers.
I think you can do that (I'm CDMA so ours is a little different). You could do the write trick and then downgrade your hboot after you get s-off. I think that would be easier.
Edit: I can't read.
Read, Search, Read again, ... Then Ask with Tapatalk 2
coal686 said:
I think you can do that (I'm CDMA so ours is a little different). You could do the write trick and then downgrade your hboot after you get s-off. I think that would be easier.
Read, Search, Read again, ... Then Ask with Tapatalk 2
Click to expand...
Click to collapse
I have allready done the wire Trick.
S off too.
The question is when i downgrade the hboot are there eny Problems with that hboot and ics custom roms or do i only need to flash ics Firmware and no Problems?
Sent Form my HTC EVO3D using my big fat fingers.
Runlevel5 said:
I have allready done the wire Trick.
S off too.
The question is when i downgrade the hboot are there eny Problems with that hboot and ics custom roms or do i only need to flash ics Firmware and no Problems?
Sent Form my HTC EVO3D using my big fat fingers.
Click to expand...
Click to collapse
Duh. I misread your OP. Afaik, that hboot will allow you to install the ICS custom roms too, but you may want to wait for a GSM user to confirm. Or try it and if not, you can always revert back. The beauty of being s-off.
Read, Search, Read again, ... Then Ask with Tapatalk 2
coal686 said:
Duh. I misread your OP. Afaik, that hboot will allow you to install the ICS custom roms too, but you may want to wait for a GSM user to confirm. Or try it and if not, you can always revert back. The beauty of being s-off.
Read, Search, Read again, ... Then Ask with Tapatalk 2
Click to expand...
Click to collapse
For that i need to Download hboot 1.49 and hboot 1.53 so if something goes wrong i can flash 1.53 and dont need to install RUU.
Hope someone has this 2 hboots so i can try it.
My only hope is that hboot 1.49 works with newest Firmware and i can flash ics custom Roms without reboots and Problems.
What i want to Do is.
Downgrade to 1.49
Unlock with recolutionary
Flash newest Firmware and flash and use eny custom Rom i want
Sent Form my HTC EVO3D using my big fat fingers.
I have a gsm evo my hboot is 1.49 and I can flash ics sense 3.6 and sense 4 roms without any issue, hope that helps
sent on my Evil Evo running the special sauce kernel
flashallthetime said:
I have a gsm evo my hboot is 1.49 and I can flash ics sense 3.6 and sense 4 roms without any issue, hope that helps
sent on my Evil Evo running the special sauce kernel
Click to expand...
Click to collapse
Offcourse it helps.
Thx for that.
Sent Form my HTC EVO3D using my big fat fingers.
I've been trying to flash some of these new roms such as Cool ICS and SolidRom MyUI, both to no avail. I am on h-boot 1.4 with s-off. The last successful rom I had running on the phone was ICS MIUI. I had tried flash these roms on ext4 initially, then I tried twrp and both without success. Any tips/suggestions to get one of these roms to work?
Do I need a newer h-boot in order to flash these newer roms with newer kernels? If so, then how/what do I flash without losing s-off?
Well here goes nothing...going to try jbear's 1.58 hboot.
I still get bootloop after installing Cool ICS...
Getting bootloop with SolidRom MyUI as well. Could use some help please.
RTC88 said:
Getting bootloop with SolidRom MyUI as well. Could use some help please.
Click to expand...
Click to collapse
Did you do a full wipe?
Sent from my Evo 3D GSM using xda app-developers app
Gmobilize said:
Did you do a full wipe?
Sent from my Evo 3D GSM using xda app-developers app
Click to expand...
Click to collapse
Yup, did a full wipe for prior to flashing every new rom. I have actually gotten SolidRom to work after installing the ICS firmware update img, but I still can't get Cool ICS to work.
RTC88 said:
Getting bootloop with SolidRom MyUI as well. Could use some help please.
Click to expand...
Click to collapse
If you are s-off then this should be easy to fix.
Some HBOOTs can only work for certain firmwares.
So if you want to run a ICS rom, you need to upgrade your hboot to either stock hboot 1.58, or Jbear's 1.58.5858
To upgrade your hboot, download the correct hboot from ramjet73's post here then rename the file to PG86IMG with the files extension as .ZIP
Place that on the root of your SDcard and boot into your bootloader. Accept the update, then restart your phone.
***EDIT***
I wasn't correct on some of the hboots and got some mixed up with the gsm EVO, for more info on hboots go to the link which ramjet73 has posted below.
I HOPED THIS HELPS!
MY PHONE
HTC EVO 3D
S-OFF and UNLOCKED
ROM: Team D.I.R.T. Unofficial AOKP v3.3
KERNEL: ButteredToasT-RLS v13.6
HBOOT: 1.40.0000
RECOVERY: 4EXT Touch Recovery
leogy101 said:
If you are s-off then this should be easy to fix.
Then there are the newer firmwares that everyone has been having a fit over, 1.50, 1.58.0000, 1.53, 1.58.5858 (this is the Juopunutbear's custom hboot)
Those are the hboots that run only SPRINT/VM ICS roms.
Click to expand...
Click to collapse
You might want to read through this thread to get the correct information on CDMA hboots. Most of those you mentioned are Sprint bootloaders (the only VM bootloaders are 1.57 and JBear 1.57.5757) but 1.53 is for GSM phones only.
ramjet73
ramjet73 said:
You might want to read through this thread to get the correct information on CDMA hboots. Most of those you mentioned are Sprint bootloaders (the only VM bootloaders are 1.57 and JBear 1.57.5757) but 1.53 is for GSM phones only.
ramjet73
Click to expand...
Click to collapse
Yeah, I figured I wasn't fully correct with some of the information. I'm gonna go to that thread you linked out and study. Thank you!
Leogy,
Hi all,
My HTC Evo 3D actually have HBoot 1.49.
Since I'd like to install the last version of the Viper 3D ROM, I need to flash HBoot to at least a more recent version of HBoot 1.50.
Could you please indicate me where I can find HBoot to download since I can't find anything when searching on Google ?
Thanks a lot !
Here's the the cool thing about viper. Viper3d can run on any hboot now.
Jsparta26 said:
Here's the the cool thing about viper. Viper3d can run on any hboot now.
Click to expand...
Click to collapse
Hi and thank you for your reply. This is good news not having to change the HBOOT.
Otherwise, and to know for next time, can you still tell me where you can find different versions of HBOOT for Evo3D?
Thank you in advance for your reply.
For gsm hboot 1.49 is preferred, you can flash is and jb roms without any issues
(Don't ask me for help as I couldn't care if your phone explodes, eh!
flashallthetime said:
For gsm hboot 1.49 is preferred, you can flash is and jb roms without any issues
(Don't ask me for help as I couldn't care if your phone explodes, eh!
Click to expand...
Click to collapse
So I tried Viper3D with HBoot 1.49 on GSM but it freezes at startup, a problem that many other people had. And all these people say that it works fine with hBoot 1.50+.
But I am not able to find a superior version of HBoot (1.58 for example) for Evo 3D GSM. Could you please indicate a depot to me ?
Thanks a lot by advance !
http://forum.xda-developers.com/showpost.php?p=30014044&postcount=7
CDMA hboots. DO NOT flash on gsm device
---------- Post added at 06:41 PM ---------- Previous post was at 06:36 PM ----------
aliasjcdenton said:
So I tried Viper3D with HBoot 1.49 on GSM but it freezes at startup, a problem that many other people had. And all these people say that it works fine with hBoot 1.50+.
But I am not able to find a superior version of HBoot (1.58 for example) for Evo 3D GSM. Could you please indicate a depot to me ?
Thanks a lot by advance !
Click to expand...
Click to collapse
1.53 hboot is latest on gsm but it has issues with viper3d. 1.49 is the best hboot for you. make sure you wipe data/cache/dalvik cache before installing. if s-on you need to turn on smartflash in 4EXT
As you mention you have 1.49 hboot so i'll just confirm, did you update to latest firmware? you need s-off for that
EM|NEM said:
http://forum.xda-developers.com/showpost.php?p=30014044&postcount=7
CDMA hboots. DO NOT flash on gsm device
---------- Post added at 06:41 PM ---------- Previous post was at 06:36 PM ----------
1.53 hboot is latest on gsm but it has issues with viper3d. 1.49 is the best hboot for you. make sure you wipe data/cache/dalvik cache before installing. if s-on you need to turn on smartflash in 4EXT
As you mention you have 1.49 hboot so i'll just confirm, did you update to latest firmware? you need s-off for that
Click to expand...
Click to collapse
Thanks you for your answer !
But "unfortunatelly" I have the GSM version of the Evo 3D.
I give you all information I found on my phone since I am not an expert :
My bootloader is :
Revolutionnary
SHOOTER_U PVT SHIP S-OFF RL
HBOOT-1.49.1107
RADIO-10.13.9020.08_2M
eMMC-boot
Jul 12 2011,15:29:51
I wiped all the caches but my phone freezes when I reboot on Viper3D.
I try now to reinstall with smartflash turned on in 4EXT and I'll let you know...
Yes i think its your old firmware.
http://d-h.st/Mf1
Flash this in bootloader
then install rom
aliasjcdenton said:
Thanks you for your answer !
But "unfortunatelly" I have the GSM version of the Evo 3D.
I give you all information I found on my phone since I am not an expert :
My bootloader is :
Revolutionnary
SHOOTER_U PVT SHIP S-OFF RL
HBOOT-1.49.1107
RADIO-10.13.9020.08_2M
eMMC-boot
Jul 12 2011,15:29:51
I wiped all the caches but my phone freezes when I reboot on Viper3D.
I try now to reinstall with smartflash turned on in 4EXT and I'll let you know...
Click to expand...
Click to collapse
I strongly suggest you keep that hboot. I have booted viper3d just fine with the 1.49 hboot.
Sent from my Evo 3D GSM using xda premium
So I reinstalled Viper3D with smartflash turned on in 4EXT. The phone reboot but still freezes (not at the same place but it freezes).
Then I installed the new bootloader.
Then I wiped all caches and reinstalled Viper3D (kernel Ziggy471).
Reboot and... IT WORKS !!! ))
THANKS A LOT FOR YOUR HELP !!!
Could you explain to me in a few words what is smartflash in 4EXT and the difference between Ziggy471 and Anthrax Kernels ?
Smartflash is used on s-on devices to flash the boot.img otherwise you would need to manually do that in fastboot.
you are s-off so you dont need that option turned on.
for differences between kernels refer to their changelogs. Anthrax is quite feature rich, not so sure about ziggy.
btw Anthrax is banned on xda so refrain from asking questions about it
Try Buttered Toast. its based on anthrax and is gpl compliant
EM|NEM said:
Smartflash is used on s-on devices to flash the boot.img otherwise you would need to manually do that in fastboot.
you are s-off so you dont need that option turned on.
for differences between kernels refer to their changelogs. Anthrax is quite feature rich, not so sure about ziggy.
btw Anthrax is banned on xda so refrain from asking questions about it
Try Buttered Toast. its based on anthrax and is gpl compliant
Click to expand...
Click to collapse
Thanks for this explanations. Very kind !
Sorry for Anthrax, I didn't know.
I tried the both kernels, installed by the Aroma installer from Viper3D. But with both of them I can't use the Wifi. Not working (
Do you have an idea on how to fix it ?
Do you think that if I install the Buttered Toast kernel it can fix this problem ? If yes, how do I install it ? Do I need to flash it trough bootlaoder ? Then reinstall Viper3D or not (reinstall will ask me to choose beetween Ziggy and Anthrax kernels again) ?
you mean the kernels were already present in Viper3D installer? if so then download anthrax(or buttered toast) kernel and install it from recovery after wiping Cache+dalvik. should solve wifi issue
EM|NEM said:
you mean the kernels were already present in Viper3D installer? if so then download anthrax(or buttered toast) kernel and install it from recovery after wiping Cache+dalvik. should solve wifi issue
Click to expand...
Click to collapse
Yes, during the installation of Viper3D, the Aroma installer ask to choose between Anthrax, Ziggy or stock kernels. If I choose Anthrax one, I have to answer some questions about overclocking and other things (but nothing about wifi). I I choose Ziggy one, all is done automatically, nothing to answer. I didn't try the stock one.
I'll try the Buttered Toast kernel now and I'll let you know...
in case it doesnt work do this:
use flash image GUI to flash a non-aroma kernel like yoda's v10.1
then flash whichever (aroma)kernel you want from recovery.
aliasjcdenton said:
Hi all,
My HTC Evo 3D actually have HBoot 1.49.
Since I'd like to install the last version of the Viper 3D ROM, I need to flash HBoot to at least a more recent version of HBoot 1.50.
Could you please indicate me where I can find HBoot to download since I can't find anything when searching on Google ?
Thanks a lot !
Click to expand...
Click to collapse
here are some Hboot downloads http://unlimited.io/jbhboots.htm
EM|NEM said:
in case it doesnt work do this:
use flash image GUI to flash a non-aroma kernel like yoda's v10.1
then flash whichever (aroma)kernel you want from recovery.
Click to expand...
Click to collapse
So I installed the Buttered Toast kernel after Viper3D installation and the wifi doesn't work too.
Today I don't have the time but tomorrow I'll try with yoda's v10.1 and let you know what happened...
mcerk02 said:
here are some Hboot downloads http://unlimited.io/jbhboots.htm
Click to expand...
Click to collapse
Thank you mcerk02 !
For the moment I keep hboot 1.49 ICS to try Viper3D and the solution given by EM|NEM.
But I've downloaded the 1.53 you indicated to me for the time i'll install a JB ROM.
aliasjcdenton said:
Thank you mcerk02 !
For the moment I sty with hboot 1.49 ICS to try Viper3D and the solution given by EM|NEM.
But I've downloaded the 1.53 you indicated to me for the time i'll install a JB ROM.
Click to expand...
Click to collapse
Its recommended to stay on 1.49 for aosp ROMs.
aliasjcdenton said:
Thank you mcerk02 !
For the moment I keep hboot 1.49 ICS to try Viper3D and the solution given by EM|NEM.
But I've downloaded the 1.53 you indicated to me for the time i'll install a JB ROM.
Click to expand...
Click to collapse
i think you are confused by the name of the hboot. jb_hboot means juopunutbear hboot not jelly bean hboot
stay on 1.49 its the best for you
i am new to this and just unlocked, rooted, s-off my evo 3d cdma and now looking to put a rom on it just wondering if there are any jelly bean roms out that work with the hboot 1.58? i tried pacman and miui but it just goes into bootloop. any ideas why or if there are any?
None of the GB or AOSP based ROM's will boot with the 1.58 hboot and there are no JB Sense ROM's for the Evo 3D yet. Since you are S-OFF you can download your bootloader with the instructions in this post, then you should be able to flash and boot JB AOSP ROM's like PacMan. I recommend using either the JBear GB (1.50.5050) or engineering (ENG 1.04) hboot for the AOSP ROM's, but other hboots that are 1.50 or lower will work.
ramjet73
I will try that now AMD see how it goes. Thanks. Posting if need help I have 4ext as recovery and did the jbear. Hope it works.
Sent from my PG86100 using xda app-developers app
hboot 1.58
hboot 1.58 from what I know, is only is only compatible with 2.89 kernal.. and I have not found a jb rom compatible.. You will have to downgrade to 1.4 or 1.04. I haven't done this yet but very close.
gollolakers said:
i am new to this and just unlocked, rooted, s-off my evo 3d cdma and now looking to put a rom on it just wondering if there are any jelly bean roms out that work with the hboot 1.58? i tried pacman and miui but it just goes into bootloop. any ideas why or if there are any?
Click to expand...
Click to collapse
ya buddy i got the pacman rom working i downgraded to 1.50 hboot but locked and downloaded the 4.1.2 rom i love it. thanks ramjet