Hi all! I was porting a rom to my device (hlte), anche when i flash rom's zip it seems all gone fine. But "SystemUI stopped" issue doesn't allow me to boot system and (this is the question) I can't logcat errors because adb says device is offline.
Anyone knows how to fix it?
Related
Hi. The original software (Bulgarian GLOBUL Q1 SE ROM) was updated with T-Mobile update. After the update when phone boots gets error - Sorry. The application CustomAPKsHidden (process com.huawei.android.CustomAPKsHidden) has stopped unexpectedly. Please try again.. Only option that I have is Force Quit, but the error message appears again and again! I tried to flash with other stock ROMs, but the operation fails at installing. The only stock ROM I can install correctly so far is the T-Mobile ROM! I have tried a lot of custom ROMs too. With them I have network problems. I noticed that phone did not recognize IMEI and BASEBAND. Please help me
p.s. So I managed the CustomAPKsHidden problem by rm /system/app/CustomAPKsHidden.apk. Now the phone boots, and I can use network properly, but Wi-Fi isn't working! I have read a post on other forum, that I need to install Wi-Fi driver, but the file is .tar.gz and the recovery (both AmonRA and CMW) did not recognize the file! How can I install this driver?!
I have the same problem !!!
Please Help me
i have the same problem also
Hi all, first of all apologies for my English ...
I have single micro sim MTK6575 I9300 800x600 Android version 4.1.19.
I tried to make do with the problem of synchronization gmail contacts and it tried to install gapps-ics-20120429-signed.zip via CWM and I returned "Error: Invalid OTA package. Missing scatter ..." probe with other versions of gapps error and gave me Signature error ...
So much reading I found behind a guy who sent the files in System had to be replaced and how many people appreciated, so I follow his advice and I copied those files ... I went to restart the message "unfortunately the process com.android.phone has stopped" very often and the phone was very unstable ... but yes, Android show me the possibility of synchronization my contacts ...
On another forum I read that this was enough to get right to make a "wipe cache partition" from recovery mode ... so in my ignorance, I did ....
The result is that the message "unfortunately the process com.android.phone has stopped" appears continuously, to the point that I can not even finish the setup tutorial... now I have a mobile where I can't do anything...but it's fine.
I have a ROM, but I SP_Flash_Tool_v3.1224.01 doesn't recognize the phone (I can not access USB debugging Setting up for your Android device) in my PC the driver is installed beacause yesterday I tried.
- I have a rom not recognize the Recovery mode to put it from "apply update from sdcard2"
Nor do I have a cwm with gapps that the recovery mode accepts.
I do not know if I'm missing something ... but the truth is that after so much error I'm pretty sure I'll brick my phone in my next try..
I would appreciate thoughts .. for sure in my ignorance I'm having an simple option ... I have the opcion of spend two days more reading about to make the convert Stock ROM flashable ZIP
Thanks in advance
Finally I get a ROM and back to 4.1.19 no syncronize contact but no crash with continuos "unfortunately the process com.android.phone has stopped" errors
If somebody know how to fix not sincronize I apretiate too much
For SP flash tool you need the correct drivers and here is the site to install the ADB drivers or you can search over the Internet its easy to find......
Can you get to the settings? Then go there and wipe the data and cache of phone and contacts under application settings
maybe you can get out of this mess:good:
Hello everyone,
Here is my problem of which I hope you can help me out.
I own a Allwinner A13 7 inch tablet, on which I installed the Cyanogen 10 mod (Due to restrictions I cannot place the link to the mod)
The problem is I probably installed the wrong touchscreen driver, so the tablet boots perfectly into the Mod but I can't do anything.
Normally it would be no problem to just put back my backup, but I can't get it to boot into CWM.
In the first place I rebooted into CWM to instal the mod by adding the following command through the "terminal app" before rebooting,
Command: "echo -e 'boot-recovery\0' > /dev/block/nandf; sync"
Now I cannot use the screen so i cant use the terminal.
I also cannot use ADB because USB debugging is standard switched of after flashing a new MOD.
Does anyone know if there is another way to get into CWM??
Thanks a LOT!
Thanks a lot!
I will have a look
Do you by change know where to get a working stock rom? I flashed one which i found using google a couple of times but it only results in a Boot loop (I have no luck at all!).
Thanks!
Update: found a stock version that works. But no my touchscreen is inverted.
Also I probably made another **** up, because I accepted the format option of Livesuit, so now I lost my backup.....
Hi! I'm trying to repair an ipro s3pro (an mtk6577-based galaxy s3 clone) which has a big problem: it doesn't call!
It's rooted and I think it doesn't have a working recovery because I can't enter it (neither I can enter fastboot) neither by adb nor by using some app on the phone... It just powers off of reboots. If I wipe it from settings, it does nothing but rebooting or halting, like if recovery doesn't exist.
The phone problem is that it has a dialogue stating "process com.android.phone has stopped" which once closed opens again and again and again, unallowing to do anything... With logcat I saw it was something related to drawable resources if I'm not wrong... I first tried to remove Phone.odex from /system/app and the error disappeared but the phone doesn't still work: the settings->about->phone info window makes com.android.phone crash because of something like "PhoneFactory.getDefaultPhone must be called from Looper thread" and the same does *#*#4636#*#*->phone info... If I try to dial a number it infinitely does network scan (it did the same also initially, but it took ten minutes to compose a number because of the force closes)... So, where can I find a system image, a stock ROM, any other ROM for this phone, or anything can help me to make it work? I tried other Phone.apk from some stock ROM or some generic mtk ROM but with no success. Also a custom (or even stock) recovery would be appreciated... What else could I do? Extract the kernel and insert it into a generic mtk ROM and then flash it?
Help me please!!!!
P.s sorry if this wasn't the best category for this, but I couldn't find anything better...
Hello.
Today I've tried to install my first KitKat-custom-rom om my device (Xperia Neo / Hallon). The fastboot of the boot.img etc. was sucessful. Also the installation of the ROM (in CWM) said that it was completed. Furthermroe the reboot was not conspicuous. But now (after the boot, where you normally can choose your language) I get this error "Unfortunately, the process com.android.phone has stopped". What I have done wrong? I also have tried Ultrakat, but get the same error. Please help me! I need my thelephone. Thanks. Bergfex
Simple issue
Bergfex2 said:
Hello.
Today I've tried to install my first KitKat-custom-rom om my device (Xperia Neo / Hallon). The fastboot of the boot.img etc. was sucessful. Also the installation of the ROM (in CWM) said that it was completed. Furthermroe the reboot was not conspicuous. But now (after the boot, where you normally can choose your language) I get this error "Unfortunately, the process com.android.phone has stopped". What I have done wrong? I also have tried Ultrakat, but get the same error. Please help me! I need my thelephone. Thanks. Bergfex
Click to expand...
Click to collapse
Just install the ROM and leave flashing gapps..... it will work..... Also try flashing different gapps.... you can try banks minimal gapps...
Try different rom
If your phone starts up now and ur able to go to developer settings try
Settings - developer options - launch tools - bad behaviour - crash the main app thread