Hello guys. I am trying to root my new xperia z2 using the rootkitxperia file and I'm stuck at waiting for device. Im using windows 7 on a mac via parallels desktop. Could it be the reason? Help pls
First and foremost, what firmware are you running?
Oh sorry, my bad. I'm running 4.4.2 build 17.1.2.A.0.314 and the model is D6502.
Thanks
Have you enabled USB debugging?
If not, tap the build number in the settings 7 times. Then go to developer options, enable USB debugging. Also make sure to authorise the computers RSA key when you connect the phone to it.
gamer649 said:
Have you enabled USB debugging?
If not, tap the build number in the settings 7 times. Then go to developer options, enable USB debugging. Also make sure to authorise the computers RSA key when you connect the phone to it.
Click to expand...
Click to collapse
I have enabled debugging and also installed adb and fastboot. I'm nt sure I get the RSA key part, can you explain more pls?
Anybody pls??? Need to get rid of the annoying ads on my phone!!
When you connect you phone to the computer, your phone will ask if you accept the connection. Something like below
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Its Rooted now!! It was due to some driver issues that I solved by googling around. Thanks guys?
Related
Hey guys! Using Windows xp(Old I know :/) And when ever I connect my USB from my phone to the computer regardless USB debugging on or off, a message telling me to install a new software will always come up! And I can't seem to tether no matter what :/ Help! Picture below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Optimus One on CM7 O'C to 768mhz!
How about installing the LG drivers?
Soooooo that's the prompt to tell me to install the LG drivers?
Sent from my Optimus One on CM7 O'C to 768mhz!
Yes, it is the fricking generic XP prompt telling you that it needs the fricking drivers.
doktornotor said:
Yes, it is the fricking generic XP prompt telling you that it needs the fricking drivers.
Click to expand...
Click to collapse
Well ok! Thanks!
Sent from my Optimus One on CM7 O'C to 768mhz!
Hi fiends, I'm facing a serious problem with my USB tethering. The connection is getting lost frequently even though the symbol for the usb tethering still remains. To regain my connection, I have to first uncheck (OFF) and then check (ON) the tethering option.
It is not a fault of the service provider because I checked it with my w810i.
I am using 2.2.2 v10d and my pc is running on win XP.
Is that XP's problem or is it my phone's firmware's problem or some other problem ..???????
Pleaseee HELPPP!!!!
Use dialup
Sent from my LG-P500
Hi
I'm a complete noob in this matter but I want to Root my device, I'm following the instructions in this thread: http://forum.xda-developers.com/showthread.php?t=2107775
My phone's version is 6.1.1.B.1.54
I'm at this point
A window will be opened saying to connect your device.switch off your phone for 30 secs.now connect the USB cable to PC(not on your device).now press down the vol.down button and hold it while connecting the USB to your phone.[now the flashtool will start flashing.but if you are doing for the first time sometimes the drivers are not able to detect the drivers of your phone and the phone starts charging in a normal way instead of flashing.don't worry.Disconnect the USB from phone only.wait for 10-20 secs.repeat from step v again and then connect your device while pressing vol.down button.the flashtool will detect your device and start flashing.)
You will be able to see percentage below.after it is finished it will be written there.disconnect USB cable from your phone only after watching it.
But I'm stuck at this point, theres absolutely no change at all at the process, this screen has been like that for like 20 mins
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
One mid-experienced friend is telling me that it seems that the program is doing nothing, that I should turn the phone on, but I know the risk is BRICK, and hell I dont want that
So if any of you more experienced users could tell me what to do or what to expect I would be greatly thankful
edit: image seems not to upload properly so here is the link http://prntscr.com/uenfj
guys please forgive me ... im a complete fa...
dont pay attention to me
Use
(Root_with_Restore_by_Bin4ry) method..
Sent from my LT22i using xda app-developers app
I have a Xolo Q700 and I broke it. The screen is cracked and I can't type my password.
By default, USB Charging mode is on ... so no use connecting it to my pc. I also tried rebooting but the USB charge stays default.
How do I control my phone now coz the OS is working fine. I cannot login.
All my data is in phone memory. How do I atleast get that data ?
glidero2l said:
I have a Xolo Q700 and I broke it. The screen is cracked and I can't type my password.
By default, USB Charging mode is on ... so no use connecting it to my pc. I also tried rebooting but the USB charge stays default.
How do I control my phone now coz the OS is working fine. I cannot login.
All my data is in phone memory. How do I atleast get that data ?
Click to expand...
Click to collapse
If you have CWM, you can try to mounting storage
Check this out! You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, click on their Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.
Hello, I am looking for help from experts and I hope you will be able to help me.
My phone has fallen and the display is not responding at all. When I turn it on, the phone vibrates and charges (the computer detects it), but the screen is all black. Having a black screen, I cannot enter the unlock code and switch it to mass storage mode.
What I have to do is recover documents, photos and contacts from this phone, but I cannot do it via my computer.
My question is, is it possible to force the computer into mass storage mode on the phone with some probgram.
Do you know any way to recover data?
I will add that I do not want to replace the screen because it is too expensive for me.
Thanks a lot for any help.
@Whitehawk1983
If phone can successfully get accessed via ADB you can pull out all desired data files to your Windows PC.
Of course in your phone USB debugging must got enabled previously
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
jwoegerbauer said:
@Whitehawk1983
If phone can successfully get accessed via ADB you can pull out all desired data files to your Windows PC.
Of course in your phone USB debugging must got enabled previously
Click to expand...
Click to collapse
This is where the problem is that I don't have USB debugging enabled.
Of course, I will try your method and will be happy to share my thoughts.
Or maybe an idea of using recovery? I already lack ideas, when I come back from work I will see what I can get from ADB.
Unfortunately, I don't have debugging on my phone and ADB doesn't work: /
Do you have any other ideas? Maybe with the use of Odin?
No.
BTW: ODIN is Samsung's user-friendly implementation of Fastboot.
I have done this many times through Unity for Android development. This phone is the latest to my collection for connection. I had to turn off Dev mode to get the usb menu back.
I turned Dev mode back on and still the pc doesnt show this phone.
Any ideas?
TIA.
Reinstall the Google USB drivers, then try again?
mthous01 said:
Reinstall the Google USB drivers, then try again?
Click to expand...
Click to collapse
Thank you. I will try that.
giantkiller3d said:
Thank you. I will try that.
Click to expand...
Click to collapse
I did. It seems to be the phone. I get the connection menu on the phone and select tethering but the PC nevers sees the pone in ADB devices. I am not sure what to do at this point.
mthous01 said:
Reinstall the Google USB drivers, then try again?
Click to expand...
Click to collapse
Bump.
What system are you plugging into, Windows/Linux?
Further, what adb package are you using? We've seen issues with minimal adb, so you might get the newest platform-tools and try again.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
As a Win10 Unity to Android and Oculus developer I solved an ADB issue in the past where there were two different versions running.
Unity had its own compared to Android Studio.
This time its different. I am going right into ADB to the phone. The phone says its tethered but the PC version reports no devices.
I did go through Android Studio to install the Google USB drvier.
Sorry my bad! I found the usb debugging option turned off. I switched it on.
I am now back in business.
Thank you all for the comments.