Hi, i've bricked my phone...someone knows how to unbrick.?
luisfernandoo.nunezfranco said:
Hi, i've bricked my phone...someone knows how to unbrick.?
Click to expand...
Click to collapse
Without any further details, it's going to be difficult to help. It's pretty hard to do so..... What did you do to brick it? Can you get into recovery. Do you have a custom rom? Provide some more details & someone might be able to help you
mightymaki said:
Without any further details, it's going to be difficult to help. It's pretty hard to do so..... What did you do to brick it? Can you get into recovery. Do you have a custom rom? Provide some more details & someone might be able to help you
Click to expand...
Click to collapse
>Hi Friend, i would appreciate yor help, my Nubua Z7 max is bricked after flashing the new(from needrom site) 5.0 stock rom and reflashing the original kitkat stock rom.
I need to repartition the phone storage , when i boot it appears only 4.0 Gbyte storage for programs , but no internal storage.
How can i repartition the internal storage?
Thank you
Simonis said:
>Hi Friend, i would appreciate yor help, my Nubua Z7 max is bricked after flashing the new(from needrom site) 5.0 stock rom and reflashing the original kitkat stock rom.
I need to repartition the phone storage , when i boot it appears only 4.0 Gbyte storage for programs , but no internal storage.
How can i repartition the internal storage?
Thank you
Click to expand...
Click to collapse
There are some instructions on the Z7 mini thread here on XDA. Have a search & follow the instructions
Unbrick Z7 max
mightymaki said:
There are some instructions on the Z7 mini thread here on XDA. Have a search & follow the instructions
Click to expand...
Click to collapse
Thank you but i did not find anything relevant by searching
[email protected] said:
Thank you but i did not find anything relevant by searching
Click to expand...
Click to collapse
You can follow this thread: http://www.androidiani.com/forum/zte-nubia-z7/446548-guida-di-unbrick-z7-max-mini.html
use google translate.
I am going to post a guide in English in about 2 hours. I have bricked mine and I followed the procedure from androidiani.
Guide to unbrick ZTE Nubia Z7 Mini
I have done this procedure on my device without any problem after a repartition failure, but I am not responsible about anything happens to your device (which is already bricked...)
The source is http://www.androidiani.com/forum/zte-nubia-z7/446548-guida-di-unbrick-z7-max-mini-27.html
1) We disable driver signature verification for windows.
- Windows XP https://mega.co.nz/#!30I1yLRD!kLblCqP9_LmiOXjpfzGbFL7m2zqAqKqZ8ciPFWMBDB0
- Windows 7 http://www.sabrent.com/support/knowledgebase.php?article=14
- Windows 8 http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
2) We download the drivers, which we extract in our desktop.
3) We connect the device while switched off to PC via a USB 2.0 port, and we launch Windows device manager. We press simultaneously Vol +/Vol -/Power button for ~5 seconds. We should see our device identified as QHUSB_BULK under Ports section in device manager. If we get prompted to format several drives we cancel all of the actions.
4) We right-click at device QHUSB_BULK > Update Driver > Browse my computer for driver software > Let me pick from a list of device drivers on my computer > Have disk > Browse, and we open Nuova cartella folder which we have extracted, containing the drivers.
We choose the driver named Qualcomm HS-USB QDloader 9008 and we install it.
We can see our device now identified with that name in the device manager.
5) We download Nubia Toolstudio , and Z7 mini files.
We extract them inside a folder in our desktop, and we run toolstudio as administrators, disabling our anti-virus, or putting the program to its' exceptions because it will be detected as malware.
In the prompt which will pop-up requiring a password, we enter the e-mail address found at the .txt file.
6) We select eMMC Download, we refresh and we should see our device identified like this.
7) We select browse, and we select the folder nx507J_files containing the Z7 mini files.
8) We select start all, and we wait until the procedure finishes.
The whole process has ended, we unplug our device and we can boot it. We will be with stock rom 1.28
Hi Stratos,
i was able bevor to google translate the italian text an d using the screenshots avaliable there i was able to flash the Nubia 7 MAX
software. BUT no imeis are in the Phone so now i have to find a method to type the IMEI numbers in the Phone dont know how..
I tried to create a flashable zip (as suggested by nano7mobile.blogspot) but did not work maybe becuase i dont know
the IMEI Folder location inside the Phone..
Simos
previously after bricked zte z7 max, can flash with ToolStudio : http://www.needrom.com/download/z7-max-2-13-android-5-beta_eng_chi/ (file: NX505J_CNCommon_V2.13.tar)
voila, phone revive.. thankyou..
Another Problem is Appear..
Imei,Meid, is gone.
i backup imei (blank) with Qpst, generate name: blank_imei.QCN ( ^^)
edit my own file : blank_imei..QCN (with blank imei,meid,esn)
the file is about 141 KB.
i open with hexa editor, feel confuse, don't know where to start, don't know the location of imei,meid,esn.
i don't know where "offset" position to be edit.
i google around,
i think need file : *.QCN from someone z7 max backup, to determine the position of imei,meid,esn. (cmiiw)
can someone help me, provide backup of Z7 Max *.QCN file?
i will Surely change it with hexa editor, edit it with my own imei,meid,esn.
or there is another way to fix this imei-meid-esn problem?
please help...
best regard's
stratos_21 said:
I have done this procedure on my device without any problem after a repartition failure, but I am not responsible about anything happens to your device (which is already bricked...)
The source is http://www.androidiani.com/forum/zte-nubia-z7/446548-guida-di-unbrick-z7-max-mini-27.html
1) We disable driver signature verification for windows.
- Windows XP https://mega.co.nz/#!30I1yLRD!kLblCqP9_LmiOXjpfzGbFL7m2zqAqKqZ8ciPFWMBDB0
- Windows 7 http://www.sabrent.com/support/knowledgebase.php?article=14
- Windows 8 http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
2) We download the drivers, which we extract in our desktop.
3) We connect the device while switched off to PC via a USB 2.0 port, and we launch Windows device manager. We press simultaneously Vol +/Vol -/Power button for ~5 seconds. We should see our device identified as QHUSB_BULK under Ports section in device manager. If we get prompted to format several drives we cancel all of the actions.
4) We right-click at device QHUSB_BULK > Update Driver > Browse my computer for driver software > Let me pick from a list of device drivers on my computer > Have disk > Browse, and we open Nuova cartella folder which we have extracted, containing the drivers.
We choose the driver named Qualcomm HS-USB QDloader 9008 and we install it.
We can see our device now identified with that name in the device manager.
5) We download Nubia Toolstudio , and Z7 mini files.
We extract them inside a folder in our desktop, and we run toolstudio as administrators, disabling our anti-virus, or putting the program to its' exceptions because it will be detected as malware.
In the prompt which will pop-up requiring a password, we enter the e-mail address found at the .txt file.
6) We select eMMC Download, we refresh and we should see our device identified like this.
7) We select browse, and we select the folder nx507J_files containing the Z7 mini files.
8) We select start all, and we wait until the procedure finishes.
The whole process has ended, we unplug our device and we can boot it. We will be with stock rom 1.28
Click to expand...
Click to collapse
I bricked it yesterday trying to downgrade from cm12.1 to Official nubia 3.01. Yesterday it showed up as QHUSB_BULK, but now it shows up as android cd rom drive and I can't do anything with it. Currently it will boot into the nubia recovery and it will charge, I can't enable it as mass storage device . I can see that all my files are there through the recovery but I can't gain access to them. Will it let me flash from External USB micro sd card as I am about to go buy one? If I turn it on it goes straight into nubia recovery and when I have it off it charges.
When you said 1.28 did you mean Official 1.82? The 1.82 did not work for me as I had an official 1.82 already downloaded. The file you linked I could not download due to poor connection. I was able to install Nubia 3.01 but I think I lost my imei because it says no sim detected. Fortunately, I do have an efs backup from HC-kTool - will I be able to restore that? Also all of this began as I went straight to V3.01 instead of V2.03, first . And then I went to cm12.1 which was extremely buggy so I try to downgrade to official v3.01 and then to Kitkat 4.4.4 v1.82 when something happened to the pc and phone lost connection during the downgrade.
What should I do next? I currently am on Lollipop 3.01 with no radios, baseband etc. My blue-tooth and wi-fi are working. Should I try to restore my efs.img I backed up with HC-kTool?
next4nextel said:
I bricked it yesterday trying to downgrade from cm12.1 to Official nubia 3.01. Yesterday it showed up as QHUSB_BULK, but now it shows up as android cd rom drive and I can't do anything with it. Currently it will boot into the nubia recovery and it will charge, I can't enable it as mass storage device . I can see that all my files are there through the recovery but I can't gain access to them. Will it let me flash from External USB micro sd card as I am about to go buy one? If I turn it on it goes straight into nubia recovery and when I have it oharges.
Click to expand...
Click to collapse
I'm in a similar situation with mine, self inflicted of course while I was trying to get the phone rooted with 3.01.
Anyway where it is now I can still boot to a point and I still have the Nubia recovery util fully functional. If you go into that and look under 'other' you will see that you have the ability to enable mass storage from there and yes you have the option of updating via SD,internal and OTG via the recovery util.
For me though unless I want to get nasty and do things from scratch it looks like I can only carry out an update using an official Nubia file and not just a recovery nor an earlier or current version of stock firmware which is kind of weird. And yes you have the option of updating via the SD,internal and OTG via the recovery util.
Thanks Parso, fortunately I followed the above steps and I restored to official 5.0. but then I lost my imei and had to sort that out. I actually like the official 5.0 except for 2 bugs one where I can't see the WiFi icon on the status bar unless I'm connected to Wi-Fi. And the other is sometimes when I get a call the screen never lights up and I can't swipe to answer the calls which is really annoying because I have to call them back.
I have the same situation right now.I upgraded my z7max 1.64 to 3.09.then I tried cm12 but there were so many problems with mobile data.
So I decided to change it.It was a big mistake to go back to 1.64 without reading anything.In the end it stopped working after a few trys.
Anyway I managed to enter toolstudio 4.6 and show it at por as com13 .Then I watched steps and flashed 3.09 to phone.It seemed like succesfull but it wasnt.Now it s not reacting and all black screen.
Also when I connected it to computer again at the beginning it was QHUSB_BULK with yellow sign.Then I tried to install Qualcomm CDMA Technologies MSM to set it up.Now it became worse.When I connect my phone it s written "unidentifed device" on device manager.
I guess we re missing one thing.For example this "Qualcomm CDMA Technologies MSM" or qhsusb驱动 folders are for XP, Vista or 7. I m using windows 8 right now and I think these files are not suitible as drivers.
So my phone is dead now.If I can set drivers up I guess I can fix it.But I cant find any other drivers and that s the biggest problem.
Hi everyone,
My feedback, After try CM12.1 i decided to return at android 4.4 and for that i used nubia updated tools and nubia studio.
After flash, no imei and only USA Band.
After restored my NV backup 1 IMEI of 2 come back ?!, After restore my
NV Value (values from opo guide, because NV Calculator give me a bad number ?) all band done USA, ENRO, JAPAN etc ...
BUT the phone lock/unlock (after enter my lock pin) every 5 secondes ?
Please help me, i have no ideas
buzz-27 said:
Hi everyone,
My feedback, After try CM12.1 i decided to return at android 4.4 and for that i used nubia updated tools and nubia studio.
After flash, no imei and only USA Band.
After restored my NV backup 1 IMEI of 2 come back ?!, After restore my
NV Value (values from opo guide, because NV Calculator give me a bad number ?) all band done USA, ENRO, JAPAN etc ...
BUT the phone lock/unlock (after enter my lock pin) every 5 secondes ?
Please help me, i have no ideas
Click to expand...
Click to collapse
For all those who are facing issues unbricking the phone as given above, use these Qualcomm drivers (5th post from top)
http://forum.cyanogenmod.org/topic/71825-hard-brick-to-hell-and-back-guide-to-recovery/page__st__40
Point to these drivers from Device manager (QHUSB_BULK). Your device should be identified correctly. Also follow the same steps exactly as given earlier. I managed to unbrick with completely working phone & IMEI.
If anyone is intersted in reading why Qualcomm devices cannot be bricked completely, read the links given below in 2 parts
http://www.androidbrick.com/ultimate-qualcomm-snapdragon-unbrick-guide-snapdragons-are-unbrickable/
http://www.androidbrick.com/unbrick...oader-9008-if-you-have-the-right-kind-of-rom/
next4nextel said:
Thanks Parso, fortunately I followed the above steps and I restored to official 5.0. but then I lost my imei and had to sort that out. I actually like the official 5.0 except for 2 bugs one where I can't see the WiFi icon on the status bar unless I'm connected to Wi-Fi. And the other is sometimes when I get a call the screen never lights up and I can't swipe to answer the calls which is really annoying because I have to call them back.
Click to expand...
Click to collapse
Hello,
COuld you please tell me how you solved the problem, cause all imei and meid are:null
Please someone help me fix the imei problem, i have my imei nr's on the box, but i did not do a back-up.
Thank you
zte z7 mini
hi bad rom update and can not get back into recovey have looked at the posts but drivers link down and when i get Nubia Toolstudio i downloade 3 times put needs password ??? any help please i am runing on windows 10 64bit and win 7 32 bit if some can help on here or mail me on [email protected] going mad with this
Hi, this is my first post here. XDA-forums are great and I think here is the place where you would help me to solve the problem with my phone Nubia z7max.
The problem is that after a software (ROM) update in recovery TWRP from the stock 3.22 to Mokee (android 6 ) , the phone remained on logo "Nubia powered by Android". I have read probably everything written about that problem in all possible places that I found around the internet including Chinese NUBIA forum, Androidiani, 4PdA and so on. I followed all the steps which incidentally are the same everywhere for fixing the phone:
http://forum.xda-developers.com/zte-z7/general/unbrick-nubia-z7-mini-t3006268/page2
stratos_21 said:
I have done this procedure on my device without any problem after a repartition failure,
but I am not responsible about anything happens to your device (which is already
bricked...)
The source is http://www.androidiani.com/forum/zte-nubia-z7/446548-guida-di-unbrick-z7-max-mini-27.html
1) We disable driver signature verification for windows.
2) We download the drivers, which we extract in our desktop.
3) We connect the device while switched off to PC via a USB 2.0 port, and we launch Windows device manager. We press simultaneously Vol +/Vol -/Power button for ~5 seconds. We should see our device identified as QHUSB_BULK under Ports section in device manager. If we get prompted to format several drives we cancel all of the actions.
4) We right-click at device QHUSB_BULK > Update Driver > Browse my computer for driver software > Let me pick from a list of device drivers on my computer > Have disk > Browse, and we open Nuova cartella folder which we have extracted, containing the drivers.
We choose the driver named Qualcomm HS-USB QDloader 9008 and we install it.
We can see our device now identified with that name in the device manager.
5) We download Z7 mini files.
We extract them inside a folder in our desktop, and we run toolstudio as administrators, disabling our anti-virus, or putting the program to its' exceptions because it will be detected as malware.
In the prompt which will pop-up requiring a password, we enter the e-mail address found at the .txt file.
6) We select eMMC Download, we refresh and we should see our device identified like this.
7) We select browse, and we select the folder nx507J_files containing the Z7 mini files.
8) We select start all, and we wait until the procedure finishes.
The whole process has ended, we unplug our device and we can boot it. We will be with stock rom 1.28
Click to expand...
Click to collapse
The difference in my case is that the procedure for flashing have completed with no errors and the phone restarts and it is in the same condition without any change: the logo "NUBIA powered by Android".
I tried to maybe over 10 different drivers. The phone is detected by the computer as it should be. When downloading the ROM in to the phone with ToolStudio_4.6 or NX505J Nubia Tool V2.1.0, procedure runs without any problems but the result is the same. There is no possibility to enter into recovery, I was TWRP and accordingly have a backup made in TWRP ahead of time when my phone is working normally.
With the combination Vol+, Vol- & Power pressed together for about 7-8 seconds the phone is recognized by the computer as HSUSB_Bulk and a cuple of disc drives with a different volume. Drivers are installed correctly although hardware is 19d2 and the phone is recognized as Qualcomm HS-USB QDLoader 9008 (COM XX).
With the combination Vol+ & Power pressed together for about 7-8 seconds the phone is recognized as Android ADB Interface, on screen are Nubia logo. In this kind I can charge (at least visibly) TWRP through "Z7_Max_All_In_One_Tool_Created_By_Tigreos" (NeedRom), but after that I can not go into Recovery. With the same tool I can install stock recovery too but still can not login to recovery.
The biggest success I've achieved after many attempts, two weeks from now, are to initial animation pictures and melody at startup and phone suddenly goes off.
Pleace Help
Related
Please help to root this phone!!!!!!!!
Мукеуз said:
Please help to root this phone!!!!!!!!
Click to expand...
Click to collapse
need to up this thread mmm... anybody know to to root this alcatel 985n
ROOTING Alcatel 985 SUCCESS Step by step tutorial
MARLBORO_R3D said:
need to up this thread mmm... anybody know to to root this alcatel 985n
Click to expand...
Click to collapse
Ok.. Hi everybody..
I'm a bit new at this so bare with me....
To root the 985 you basically need this:
- Installed Drivers VERY IMPORTANT!
- Installed ADB shell (To open ADB command prompt go into the install folder of adb -> sdk -> platform tools -> hold SHIFT and right click -> select open command prompt window here) - this was the command line for me - for you it might be different!
- Create ROM backup following these instructions:
- Open ADB command prompt (described above) and enter adb shell cat /proc/mtd
- If all goes well copy the results into notepad and save the file as firmware.info
- After that open MTK 65xx ROM Studio
- Go File -> Load Firmware.info -> select the file you generated earlier
- Notice that the window is now filled with data from your file -> click Create ROM
- Now save that file somewhere easily accessible it's your SCATTER file needed a bit later.
- Open SP Flash Tool (Make sure MT 65x3 USB VCOM drivers are installed )
- Go Options -> USB Mode
- Then press SCATTER-LOADING to the right and select your SCATTER file generated earlier (ignore messages)
- Go into the read-back tab
- Select every checkbox (to make FULL Backup,) or just what you need (Bootimg.img) select where to save Backup!
- When the windows appear make sure that READ PAGE ONLY is selected!
- Press READ BACK (by this point your phone hasn't been connected at all to the PC)
- Now turn off your phone, pull out the battery,hold VOLUME UP, plug the phone in and THEN quickly put the battery back in!!!
- If all goes well you should see one red bar and one or several blue ones (depending on what you selected to backup)
- This can take a while, BOOM Green circle
- BACKUP IS DONE!
- Now on to the rooting stuff:
- In SP Flash Tool (I am expecting that you closed it and opened it again)
- Check to see if USB Mode is enabled (see above)
- Load the SCATTER file again
- Then when you see the files and checkboxes in the window under click on BOOTIMG and SELECT the one
that is attached to this post (!!!!NOTE This is the same BOOTIMG from the serbian video on youtube WE ONLY NEED THE BOOTIMG FROM THIS GUY NOTHING ELSE ESPECIALLY NOT THE SCATTER!!!!)
- Ignore the following messages
- Make sure that your phone is not plugged in, turned off and battery removed
- Press Download, wait 15 sec, plug the phone in THEN insert battery
- Wait for it.. (Nice one)
- A yellow bar will go across and BOOM Green circle
AT THIS POINT YOU HAVE FLASHED YOUR BOOTIMG IF YOU HAVE DONE THIS RIGHT THERE WOULD BE NO PROBLEMS, IF IT'S DONE WRONG YOUR PHONE MIGHT NOT RECOGNIZE THE SIM CARD (IF THIS HAPPENS DO THE LAST STEP AGAIN BUT WITH THE BOOTIMG FROM THE BACKUP)
- Unplug phone, remove battery, insert battery -> BOOT
If it boots, OK, if not flash back with backup (see above written in BIG letters
- Download SuperOneClick and open it
- Plug in your phone TURNED ON!
- Click Root. Reboot. DONE
If anything else pops up you have a problem with the drivers make sure that the drivers are correctly installed (stupid Windows rrrr...)
Now you have rooted you ALCATEL OT-985n/d and can do all kinds of crazy stuff... :cyclops:
DISCLAIMER:
I AM NOT RESPONSIBLE FOR THE DAMAGE TO YOUR PHONE, YOU, OR ANY OTHER MEMBER OF YOUR FAMILY.
WON'T BE HELD AT CHARGE IF YOUR PHONE BLOWS UP, FALLS DOWN AND ERRADICATES HALF OF THE HUMAN RACE AS A RESULT OF MOLECULAR MUTATION CAUSED BY THE GAMA RADIATION BLA BLA YOU GET MY DRIFT..
THIS POST IS A RESULT FROM VARIOUS POSTS (and screwing up my phone multiple times) PUT TOGETHER IN THE METHOD THAT WORKED FOR ME!
CREDITS:
WOULD LIKE TO THANK
giuaig - this is all yours buddy :good
and every other member that banged their head at this for days.. screwed up their phone at least twice and had the nerve to cope!
Bye everybody
Need help in restoring Android and custpack
Hi everybody!
I need some help to restore my 985. I succeeded rooting the phone with this great guide but I messed up with /custpack trying to remove some factory apps (facebook, operator apps...) with the result of having an unusable device stuck in the boot process and rebooting before the system is up in an infinite cycle.
I tried to restore my custpack backup made before rooting with no results. After some whole nights spent asleep to find factory ROM or updates
which seems can't be found on the net, I took the fool decision to format the whole ROM trying to make One Touch Updater S search the firmware and restore the phone but it didn't, leaving me with a message like "You already got the latest version for your phone" (kidding?).
I managed to restore some partition backups with SP Flash Tool. Now the phone can turn on, show the battery-charging logo, the android logo and the recovery system. But it won't boot in normal mode: it gets stuck at the Android logo with no further steps. ADB can discover and recognise the stuck device, but won't let me reach a shell ("/system/bin/sh not found" or something similar). SPFT seems to let me download the Android and custpack images but at the end it fires an error about DRAM.
Is there any Alcatel One Touch 985 user that can send me Android and custpack images to restore my phone?
Hallo guys. Thanks for opening this thread.
My OT985 is stuffed with bloatware from an Italian Carrier, that makes it impossible to download updates and new apps (I can't even download G+).
Do you think that flashing an original stock rom will fix my issue? Does anybody out there have a non-branded backup rom I could possibly use?
Thank you for any help and replies.
AlcaWel said:
Hi everybody!
I need some help to restore my 985. I succeeded rooting the phone with this great guide but I messed up with /custpack trying to remove some factory apps (facebook, operator apps...) with the result of having an unusable device stuck in the boot process and rebooting before the system is up in an infinite cycle.
I tried to restore my custpack backup made before rooting with no results. After some whole nights spent asleep to find factory ROM or updates
which seems can't be found on the net, I took the fool decision to format the whole ROM trying to make One Touch Updater S search the firmware and restore the phone but it didn't, leaving me with a message like "You already got the latest version for your phone" (kidding?).
I managed to restore some partition backups with SP Flash Tool. Now the phone can turn on, show the battery-charging logo, the android logo and the recovery system. But it won't boot in normal mode: it gets stuck at the Android logo with no further steps. ADB can discover and recognise the stuck device, but won't let me reach a shell ("/system/bin/sh not found" or something similar). SPFT seems to let me download the Android and custpack images but at the end it fires an error about DRAM.
Is there any Alcatel One Touch 985 user that can send me Android and custpack images to restore my phone?
Click to expand...
Click to collapse
I think I have a backup but I'm new and can't post links... I'll be back!
help me for mt65x3 driver
hi all,
i need help for installing the mt65x3 driver.
My ot 985d has USB\Vid_1bbb&Pid_00f2&Rev_0255&MI_01
USB\Vid_1bbb&Pid_00f2&MI_01
this device is by Mt65x3 Driver Installation not suported.
Sorry for my bad english, im for german
Thanks for our help ! ! !
Hi to all . Is there any user of 985d who can back up and send me the original boot.img of the device?
Hi all,
first I was runing into numerous problems with this guide, so I switched to this one and I managed to do a lot more: http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5
But with that other guide, I couldn't go further than step 8, because error "PMT changed for the ROM, it must be downloaded." would pop-up.
The same would happen if I followed the steps after "Now onto the rooting stuff" - the error "PMT changed for the ROM, it must be downloaded." pops-up instead of a "green circle".
Can anyone help resolve this?
Hello, need to root ZTE V790. Please help. Thank you very much.
Rooting ZTE V790
After series of serching, I was able to root zte V790 through the help of a chinese forum:
bbs.hiapk.com/thread-4620917-1-1.html :good:
Tools to Download
1. Download drivers.
mediafire.com/?f7h1f7i7skggmtg
2. Download V790 Root Tool
pan.baidu.com/share/link?shareid=379900&uk=255085915
DISCLAIMER: I AM NOT RESPONSIBLE IF YOU BRICK / RUIN YOUR PHONE IN ANY WAY. THE FOLLOWING ARE THE STEPS I HAVE FOLLOWED TO SUCCESSFULLY ROOT MY ZTE V790
Procedures:
1.Extract and Install all drivers in the computer.
2.Turn Off the phone and take the sim card out.
3.Turn on the phone. Ensure that the battery is not less than 50%.
4.Plug the usb cable from phone to computer. Ensure that the phone USB debugging is ticked.(Home>Settings>Developer options>USB Debugging). Phone USB computer connection should be "connected as an installer", this can be done by unticking Media device MTP or Camera PTP.
5.Run the Root Tool.exe. (Note that this is in chinese but there are few english words just Follow on screen prompts. It will automatically detect the phone if the drivers are installed correctly)
6.Phone will restart after the process is completed. (Whole process take about 2 to 5 minutes)
7.Once the phone has turned on, You can now see the Superuser icon and Root explorer. Congratulations, you are now rooted.:highfive:
If unsuccessful, repeat all the steps.
Hit Thanks.
astigjaps said:
After series of serching, I was able to root zte V790 through the help of a chinese forum:
bbs.hiapk.com/thread-4620917-1-1.html :good:
Tools to Download
1. Download drivers.
mediafire.com/?f7h1f7i7skggmtg
2. Download V790 Root Tool
pan.baidu.com/share/link?shareid=379900&uk=255085915
DISCLAIMER: I AM NOT RESPONSIBLE IF YOU BRICK / RUIN YOUR PHONE IN ANY WAY. THE FOLLOWING ARE THE STEPS I HAVE FOLLOWED TO SUCCESSFULLY ROOT MY ZTE V790
Procedures:
1.Extract and Install all drivers in the computer.
2.Turn Off the phone and take the sim card out.
3.Turn on the phone. Ensure that the battery is not less than 50%.
4.Plug the usb cable from phone to computer. Ensure that the phone USB debugging is ticked.(Home>Settings>Developer options>USB Debugging). Phone USB computer connection should be "connected as an installer", this can be done by unticking Media device MTP or Camera PTP.
5.Run the Root Tool.exe. (Note that this is in chinese but there are few english words just Follow on screen prompts. It will automatically detect the phone if the drivers are installed correctly)
6.Phone will restart after the process is completed. (Whole process take about 2 to 5 minutes)
7.Once the phone has turned on, You can now see the Superuser icon and Root explorer. Congratulations, you are now rooted.:highfive:
If unsuccessful, repeat all the steps.
Hit Thanks.
Click to expand...
Click to collapse
Wow, thanks.. Finally rooted mine. You're the man :highfive:
Astig ka nga!
help
jessiegoran said:
Wow, thanks.. Finally rooted mine. You're the man :highfive:
Astig ka nga!
Click to expand...
Click to collapse
tol bat ayaw gumana saakin ? na stock ako sa zte boot logo
Help
Hi every one, I bought ZTE V790 Movistar Motion, (in Venezuela) I've rooted and Install a Vietname Rom, Now my Phone Is (Model Number: V8403 Based version Viettel_V8403B01 Build Number VIETTEL_V8403V1.0.0B09) and it's a stupid Rom, I've tried to install another rom from Russian Site but my phone refuse it!!! I want my Phone Back I Don't want this Vietname Version Pleas HELP
Oh yes!!!
thanks for this tutorial bro.. it worked for me!!
now my phone is rooted!!
you're great dude..
thanks a lot..
BTW.. if i managed to root my phone is there any way i can unlock the SIM slots?
SIM2 is already unlocked but SIM1 slot is still locked.
thanks again dude..
it says adb is out of date...
Some tips:
1) If the device is not recognised in the root tool. Install JoinMe as well, it contains another USB driver.
2) If you are stuck in ZTE logo or "waiting for device", just enable an option in Windows Update to automatically search and install device drivers. Windows will ask this when you select 'Trouble shooting' if installing drivers fails.
3) You may need to install USB drivers in total three times from: ZTE USB driver, JoinMe and Windows Update.
ZTE 790 Root
My ZTE v790 still gets stuck in ZTE Logo.
Android driver still missing after selecting auto update drivers.
I'm using XP and it's online.
I reinstalled both the ZTE Drivers and Join ME.
Any other suggestions?
English version of ROM for v90
Hello
is there any English version ROM for v790? I have bought zte v790, android 2.3.6 and unfortunately there is plenty of useless applications in Chinese, as well as Chinese system communicates and the worst thing is that the browser is very difficult to get Google or any proper websites like facebook for example. I can do root and thank you for the instruction but then i will need to install ROM in english version. Is there any way to get English version for v790?
Thank you!
Mk
Heya,
I'm looking for android 4.0 rom for this phone too. Any know where i can find one? I've found Russian one but that's far from what I'm looking for.
Thanks
kptbomba said:
Heya,
I'm looking for android 4.0 rom for this phone too. Any know where i can find one? I've found Russian one but that's far from what I'm looking for.
Thanks
Click to expand...
Click to collapse
every rom has every language, just change it through the settings. i didn't find it very hard to guess where to click as there are icons and the language list has "english" in english. funny that.
Found the fix to getting stuck at ZTE Logo!
Hi guys,
Like Furiku, i kept getting stuck at the ZTE Logo when attempting the steps from the OP.
After doing some research, i found another spanish-language guide that included the Moto Helper drivers. Installing the drivers did the trick.
As i am a new user and cannot yet post links, please search for the file indicated below on google, install, and do the steps again. I'm using Windows 8 and there comes a point when it goes beyond the ZTE Logo to a green screen which looks pixelated, and i thought i might have ruined my phone. Gave me a 3-second heart attack. Then the Moto Helper drivers kicked in, and it rebooted, and now the SuperUser icon is there.
Please note that I am making the same disclaimer as the OP: Do this at your own risk. Follow instructions to the letter. We cannot be held responsible for issues that may lead to a damaged/bricked phone.
Google this file and DL: MotoHelper_2.1.32_Driver_5.4.0.exe
No go with Android 4
AzmoD3uS said:
Hi guys,
Like Furiku, i kept getting stuck at the ZTE Logo when attempting the steps from the OP.
After doing some research, i found another spanish-language guide that included the Moto Helper drivers. Installing the drivers did the trick.
As i am a new user and cannot yet post links, please search for the file indicated below on google, install, and do the steps again. I'm using Windows 8 and there comes a point when it goes beyond the ZTE Logo to a green screen which looks pixelated, and i thought i might have ruined my phone. Gave me a 3-second heart attack. Then the Moto Helper drivers kicked in, and it rebooted, and now the SuperUser icon is there.
Please note that I am making the same disclaimer as the OP: Do this at your own risk. Follow instructions to the letter. We cannot be held responsible for issues that may lead to a damaged/bricked phone.
Google this file and DL: MotoHelper_2.1.32_Driver_5.4.0.exe
Click to expand...
Click to collapse
I've installed all the drivers. On the English words displayed (after being told to press any key & doing so), I get "fastboot error: protocol fault (no status)" & "< waiting for device >" with the phone's display stuck on the ZTE logo. I think that the problem is that my phone uses Android 4 (Jelly Bean) whereas other phones successfully rooted are using Android 2 (Gingerbread). Any ideas?
astigjaps said:
After series of serching, I was able to root zte V790 through the help of a chinese forum:
bbs.hiapk.com/thread-4620917-1-1.html :good:
Tools to Download
1. Download drivers.
mediafire.com/?f7h1f7i7skggmtg
2. Download V790 Root Tool
pan.baidu.com/share/link?shareid=379900&uk=255085915
DISCLAIMER: I AM NOT RESPONSIBLE IF YOU BRICK / RUIN YOUR PHONE IN ANY WAY. THE FOLLOWING ARE THE STEPS I HAVE FOLLOWED TO SUCCESSFULLY ROOT MY ZTE V790
Procedures:
1.Extract and Install all drivers in the computer.
2.Turn Off the phone and take the sim card out.
3.Turn on the phone. Ensure that the battery is not less than 50%.
4.Plug the usb cable from phone to computer. Ensure that the phone USB debugging is ticked.(Home>Settings>Developer options>USB Debugging). Phone USB computer connection should be "connected as an installer", this can be done by unticking Media device MTP or Camera PTP.
5.Run the Root Tool.exe. (Note that this is in chinese but there are few english words just Follow on screen prompts. It will automatically detect the phone if the drivers are installed correctly)
6.Phone will restart after the process is completed. (Whole process take about 2 to 5 minutes)
7.Once the phone has turned on, You can now see the Superuser icon and Root explorer. Congratulations, you are now rooted.:highfive:
If unsuccessful, repeat all the steps.
Hit Thanks.
Click to expand...
Click to collapse
jessiegoran said:
Wow, thanks.. Finally rooted mine. You're the man :highfive:
Astig ka nga!
Click to expand...
Click to collapse
How do you install the CFW????
Please help
Thanks
Is there any custom ROM for this phone?
Why when I plug jt my computer it says it's a V790 when it's a t2 lite
Hallo everyone.
I have just tried to follow this guide to install Google Play and so on: http://forum.xda-developers.com/showthread.php?t=2256075
Guide:
I'm here for help you, and yes I bought K900
Here is the international .inb file to flash.
Part One: How flash international version:
1. create SDFUSE folder in the / of sdcard.
2. insert inb file there
3. go to fastboot mode (Vol+ + Power) and choose sdfuseupdate
4. done.
you'll get official international 47 rom (ROW region). It has google apps, it has play store.
INB file is here:
https://mega.co.nz/#F!xNdywAJA!AFbE_HikuoFODLpoc1j7Yg
But right after the message saying SDCARD UPDATE COMPLETED (as i remember it), the phone wont start again. The three buttons on the front flashes and nothing else happens.
Any clues to what might be the problem?
I hope you can help me!
Best regard
Jonas Kristiansen
Question
Hi Jonas,
Sorry to hear that.
Did you totally brick your phone? Can you still go into recovery or Hboot?
Is your phone recognized by adb and fastboot?
If you tell me more, maybe I can help.
Denis
Jonas Kristiansen said:
Hallo everyone.
I have just tried to follow this guide to install Google Play and so on: http://forum.xda-developers.com/showthread.php?t=2256075
Guide:
I'm here for help you, and yes I bought K900
Here is the international .inb file to flash.
Part One: How flash international version:
1. create SDFUSE folder in the / of sdcard.
2. insert inb file there
3. go to fastboot mode (Vol+ + Power) and choose sdfuseupdate
4. done.
you'll get official international 47 rom (ROW region). It has google apps, it has play store.
INB file is here:
https://mega.co.nz/#F!xNdywAJA!AFbE_HikuoFODLpoc1j7Yg
But right after the message saying SDCARD UPDATE COMPLETED (as i remember it), the phone wont start again. The three buttons on the front flashes and nothing else happens.
Any clues to what might be the problem?
I hope you can help me!
Best regard
Jonas Kristiansen
Click to expand...
Click to collapse
Same problem
Hello
I have same problem, i brick my K900. I try to start it, but phone is really little ignorant, absolutly not response to all. Flash using xFSTK is without chance.
Yep, Recovery and DroidBoot is unavilable. Phone only one flash touch buttons and nothing more... :crying:
Can you help me? I thing, hard-brick is too hard to solve.
Sorry for my english...
Maybe it will be usefull:
Volume down, hold it, then power button, Testing Menu appear, Droidboot, Recovery, Clear cache, Clear data (factory reset), reboot.
how unbrick ur k900 device
Jonas Kristiansen said:
Hallo everyone.
I have just tried to follow this guide to install Google Play and so on: http://forum.xda-developers.com/showthread.php?t=2256075
Guide:
I'm here for help you, and yes I bought K900
Here is the international .inb file to flash.
Part One: How flash international version:
1. create SDFUSE folder in the / of sdcard.
2. insert inb file there
3. go to fastboot mode (Vol+ + Power) and choose sdfuseupdate
4. done.
you'll get official international 47 rom (ROW region). It has google apps, it has play store.
INB file is here:
https://mega.co.nz/#F!xNdywAJA!AFbE_HikuoFODLpoc1j7Yg
But right after the message saying SDCARD UPDATE COMPLETED (as i remember it), the phone wont start again. The three buttons on the front flashes and nothing else happens.
Any clues to what might be the problem?
I hope you can help me!
Best regard
Jonas Kristiansen
Click to expand...
Click to collapse
(my english is veryyyyyyyyyy bad)
dont worry . there is a simple method :
this method work for hardbrick and softbrick too.
first download a favorite Rom you want
u can choice ur Rom from this page : http://m.kaskus.co.id/post/5300581ffbca17d47b8b457c#post5300581ffbca17d47b8b457c
download and install manufacturing flash tool and intel android device usb driver
https://dl.dropboxusercontent.com/u/26833962/K900 Tools/ManufacturingFlashTool_Setup_6.0.2.exe
http://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
second Refer this : http://forum.xda-developers.com/show...postcount=3245
This method require computer with driver and software installed and USB cable for sure
( unzip ur rom and open xml file on ur rom with manufacturing flash tool softwre)
maybe this video can help you too :
https://www.youtube.com/watch?v=BhvA_T694kw
This method works on my hardbrick device succeesfully
tatu63 said:
(my english is veryyyyyyyyyy bad)
dont worry . there is a simple method :
this method work for hardbrick and softbrick too.
first download a favorite Rom you want
u can choice ur Rom from this page : http://m.kaskus.co.id/post/5300581ffbca17d47b8b457c#post5300581ffbca17d47b8b457c
download and install manufacturing flash tool and intel android device usb driver
https://dl.dropboxusercontent.com/u/26833962/K900 Tools/ManufacturingFlashTool_Setup_6.0.2.exe
http://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
second Refer this : http://forum.xda-developers.com/show...postcount=3245
This method require computer with driver and software installed and USB cable for sure
( unzip ur rom and open xml file on ur rom with manufacturing flash tool softwre)
maybe this video can help you too :
https://www.youtube.com/watch?v=BhvA_T694kw
This method works on my hardbrick device succeesfully
Click to expand...
Click to collapse
hi tatu63
Me too got my K900 bricked while updating Rom from MFT .
Its not starting anymore. Complete black screen no menu lights at all.
When i connect my phone to usb cable it shows this in MFT tool and hangs up
07/01/14 12:47:15.886 DEBUG : New Android device -> serial: MedfieldEC710F76 status: 0 port: 1
and
Hello , Guys
Since you all probably know, Lenovo A7020a48 has Android 6.0 Marshmallow which cannot be rooted because of the following :
1 - We got a locked bootloader, we can't flash or boot into custom recoveries and sadly at the moment I couldn't find a way to unlock it.
2 - We don't even have a custom recovery made for that model yet, I tried different version of TWRP for A7020a40 ~ A7020a46 models and they all crashed upon booting to them.
3 - Kingroot and similiar apps can't root Android 6.0.
So the only way to root your phone would be to downgrade it to Android 5.1 Lolipop which is easy.
Here is download links for the stock roms :
A7020a48_LL_S125_160419_ROW.rar.7z
A7020a48_S259_160721_ROW.7z
When you finish downloading please don't forget that we are going to use the SP Flash Tool provided in the rom as only that version "SP_Flash_Tool_5.1552.00" worked for me with no errors however with latest versions i got problems.
Obviously you are going to install the USB drivers and CDC drivers located at the "DRV_Tools" folder in the rom you downloaded.
after installing the drivers correctly turn off your phone, open SP flash tool, and choose the scatter file located at : "\SW\target_bin\MT6755_Android_scatter.txt" and then choose "Download Mode" then wait for it to finish checking the files, then click on the download button on the top left corner.
Then connect your device and wait for it to detect the device .
Wait until the flashing is complete Then After the green circle appears, simply disconnect your phone and boot into system normally.
Note: You might see a black box in the bottom left corner saying "efuse flash done or similar stuff" don't worry about it" it won't appear again however if you got an error saying "DL image failed" then you did something wrong repeat the previous steps again and make sure you choose everything correct especially your rom.
Now to the last part, finish the first time setup screens by skipping most of them and DO NOT UPDATE YOUR SYSTEM AT ALL
if you got a notification to update, simply ignore it or press cancel, and open google chrome, download king root and wait for it to simply root you phone.
Congratulations that's the first part for rooting your phone.
Now to Fixing Your IMEI
Simply Enable USB debugging in options and enable OEM unlocking.
Then power off your phone.
Download this tool : MauiMETA_v9.1635.23.rar
Yes Again it has to be that specific versions, with other versions i couldn't connect to my device however with this version i could.
Extract it to a random location on your pc and MauiMeta.exe and click on options and enable "enable composite kernel usb (adb)" then click on reconnect.
Now you have to connect your device with usb and turn it on, don't worry MauiMeta will change the boot to META mode automatically after it starts booting leave it as it's and wait for the tool to connect to your phone.
***After it connects simply choose IMEI download and a new window should appear, first click on upload from flash button then click yes to retrieve the modem file from your phone, then simply type your IMEI ( Please note that changing your IMEI is illegal however you should only use this method to fix your IMEI not change it ! , you have been warned)
Note : IMEI numbers should be 15 numbers however with MauiMeta you should only type the first 14 number as the 15th number is only a checksum number and will be added automatically.
After typing the IMEIs and checking them simply click on download to flash.
After it says "flashing is successful" then close the window and click Disconnect, and your phone should turn off automatically and you should start it up again.
*** Note : If you have a corrupted NVRAM file on your phone then you are lucky since that rom comes with the modem db file as well to fix NVRAM issues, simply click "Change NVRAM database file" then click No to choose the file, The file exists in the ROM package you downloaded earlier in the following location : "SW\modemdb\MDDB_InfoCustomApp....etc.EDB" and continue the rest of the steps normally.
Please Note that I won't provide support for this, I have only created this tutorial to save time for other people and I'm not expert yet to fix all the problem you may face however after following these steps i managed to root my device and even fix the invalid imei errors i got.
Also if you found errors in my thread or mistakes Please let me know so i can fix them.
Good luck and Don't hard brick your phone XD
I get this error in SP FLASH TOOL 5.1552.00- STATUS_SEC_PL_VFY_FAIL (-10*****)
Any idea ?
Error coming?
i got the same error in SP FLASH TOOL 5.1552.00- (BROM ERROR : STATUS_SEC_PL_VFY_FAIL (-1073610746))
nishkarshxda said:
i got the same error in SP FLASH TOOL 5.1552.00- (BROM ERROR : STATUS_SEC_PL_VFY_FAIL (-1073610746))
Click to expand...
Click to collapse
Use This Version Of Flash tool enable usb and storage checksum hit download ( Use different usb port better use backside of CPU )
Sp-flash-tool-V5-1548
10000% Working
mobile not getting switched on after downgrading
Hi, I tried to flash my Lenovo vibe K5 note (a7020a48 4 GB RAM). It was done without any error but I couldn't switch on my mobile nor it was detected in my computer. Please help me
Bro i download and flashed successfully but phone cant turn on but i flashed again marshmallow phone will turn on...Why lollipop cant boot... Second link for rom is lollipop or not
Any proof?
Bro where did you get these two rooms from? Tell us the source. Otherwise, how will we know?
after flash mobile no on anybody can u help me to how to flash 5.0 in lenovo k5 note
It worked great thanks .......though minor glitches may occur such as not playing any sound and not supporting JIO sim card. These can be fixed by System Updating your phone to the latest version preferably through a sound wifi connection.
Hi all,
I recently got my hands on a screen-damaged Archos 50 Diamond (ac50da) running the latest stable stock Android 4.4.4 ROM (I didn't know that an Android 5.1 preview was available here : https://blog.archos.com/fr/lollipop-en-version-beta-sur-le-50-diamond/).
I bricked it by doing the following :
- Trying to install @phhusson TWRP from here : https://twrp.me/archos/archos50diamond.html, without upgrading to 5.1 first (as explained here : https://forum.xda-developers.com/ar...ment/twrp-support-thread-archos-twrp-t3468677).
This did not work, as when trying to enter recovery mode by holding VolumeUp while powering up the phone would now bring up a totally green, then totally red screen, but nothing else. No device is detected if I plug it in a computer (either Linux or Windows).
- Booting (not flashing yet) CWM from here : http://www.arctablet.com/blog/forum...50-diamond-root-procedure-recovery-cwm-v6051/
For some reason, I ended up rebooting (without installing CWM or anything else). But before rebooting, CWM warned me that my ROM wasn't rooted, and offered to install the su binary in /system/xbin/su. That's were I met my doom, because the device would then no longer boot.
- If I power up the device, the Archos logo shows up, then a black screen. Plugging the device on a Windows computer shows a dozen data drives, and the devices itself identified as QHSUSB_BULK.
- I thought of using QFIL (Qualcomm File Image Loader) to re-image the device : https://androidmtk.com/download-qualcomm-flash-image-loader-qfil
I managed to get my hands on a stock firmware image (prog_emmc_firehose_8936.mbn or validated_emmc_firehose_8936.mbn) by paying here : https://firmware.gem-flash.com/index.php?a=browse&b=file-info&id=110067 but QFIL won't flash it as I don't have a driver for QHSUSB_BULK.
- However, I'm unable to find a proper driver for that device. I found several Qualcomm drivers, either for QHSUSB_BULK or the (apparently older) QDLOAD, but none of them include definitions for the Archos 50 Diamond.
- The device's USB identification is the following : USB\VID_05C6&PID_9057&MI_00
VID (Vendor ID) 05C6 = Qualcomm
PID (Product ID) 9057 = ??? (should be the Archos 50 Diamond but is not referenced anywhere)
MI (Master Interface) = ??? (no idea what that means)
- Other findings :
The .mbn files refer to a Qualcomm Snapdragon 610 MSM8936
Inside the stock image is an android-info.txt file that reads "board=msm8916"
So, can you guys help me out here ?
I think that finding a proper QHSUSB_BULK driver for VID_05C6&PID_9057 should be enough, but I'm open to any suggestion.
Thanks !
I think I found a driver for that device here : https://driverpack.io/fr/hwids/USB\VID_1D9C&PID_9057&MI_04
It's for a "Sonim XP5 HS-USB NMEA 9057", but whatever.
However, after installing the driver (just uncompress it using 7-zip), QFIL fails when trying to download the firmware image with "failed to switch to EDL mode" (EDL = emergency download).
Anyone has a better idea*?
VICTORY !!!
When trying to power off/reboot the device, I noticed that it could still boot in fastboot mode, by holding VolumeUp + power until the screen turns green, then release the buttons before the screen turns red.
I could then boot again in CWM (still unable to flash it though), and re-install a stock ROM from the manufacturer site : https://www.archos.com/us/support/support_tech/downloads.html?type=s&rlist=1&devid=240
Phew ! At last !
And now to try and install the 5.1 beta update…
Hello! I have Archos diamond 50 in qd 9008 mode always. Can you upload firmware that you download from gemflash? I want try unbrick device.
IDLeon said:
Hello! I have Archos diamond 50 in qd 9008 mode always. Can you upload firmware that you download from gemflash? I want try unbrick device.
Click to expand...
Click to collapse
Do you have any place I can upload it to ?
Hi.
I have the same problem and I cant find the flash file.
Can you please give me the .mbn flash file (prog_emmc_firehose_8936.mbn or validated_emmc_firehose_8936.mbn) ?
Thank you
karim-ps said:
Hi.
I have the same problem and I cant find the flash file.
Can you please give me the .mbn flash file (prog_emmc_firehose_8936.mbn or validated_emmc_firehose_8936.mbn) ?
Thank you
Click to expand...
Click to collapse
Do you have any place I can upload it to ?
Maybe Google drive or wetransfer.com
Thank you
karim-ps said:
Maybe Google drive or wetransfer.com
Thank you
Click to expand...
Click to collapse
If you can give me access to one of yours, I'll do it ASAP. I don't have one myself and don't plan to.
breversa said:
If you can give me access to one of yours, I'll do it ASAP. I don't have one myself and don't plan to.
Click to expand...
Click to collapse
I sent it through a private message.
Thank you
For anyone interested : I have some stock firmware files, but nowhere to store them (I'm not looking to register to yet another service). If you're willing to host them, please send me a private message. Thanks !
Thank you
breversa said:
For anyone interested : I have some stock firmware files, but nowhere to store them (I'm not looking to register to yet another service). If you're willing to host them, please send me a private message. Thanks !
Click to expand...
Click to collapse
I'm in the process of uploading the 50_Diamond.rar stock firmware to https://androidfilehost.com/
I'll give the link when it's done. Feel free to ping me if I forget !
Okay, here it is : https://www.androidfilehost.com/?w=files&flid=319661