Hi all guys today afternoon i rooted my xperia tablet s by the new method , unfortunately after several hours of use and after several reboots ,suddenly, after my last reboot , my xperia tablet s doesn't boot and got stucked on SONY logo. I tryed to enter recovery but i can't :/ I am a little bit noob can someone help me? Or i have to send it to assistance? Plz help me
You did Vol up + power but it does not enter recovery? Btw you might want to ask in the tablet s forum that's where guys hang out
Sent from my R800i using Tapatalk 2
jpm168 said:
You did Vol up + power but it does not enter recovery? Btw you might want to ask in the tablet s forum that's where guys hang out
Sent from my R800i using Tapatalk 2
Click to expand...
Click to collapse
in the tablet s forum they answer for tablet s not for xperia tablet s i think :/ Btw i have tried for that combination but i can't enter
wyatt86 said:
in the tablet s forum they answer for tablet s not for xperia tablet s i think :/ Btw i have tried for that combination but i can't enter
Click to expand...
Click to collapse
I guess it's the same, just ask here
If I'm wrong a mod could redirect you to the right forum
ty
Enter menu Recovery Xperia Tablet S SGPT121US
es algo complicado entrar en el menu recovery en esta tablet, luego de intentar e intentar logre entrar, la combinacion es la siguiente: volumen + (mantenlo presionado siempre) presionas power... al encender la pantalla lo sueltas, cuando aparezca el logo sony (es algo rapido) presionas de nuevo y lo mantienes pulsado... si lo haz hecho bien... el logo sony desaparece y sale como distorcionado, en ese momento sueltas power y lo presionas repetidamente! Ya te debe aparecer el Menu REcovery
No se cual es el metodo para entrar a dicho menu... pero asi es que lo hago
Help... un-brick Xperia Tablet S
I had the same problem... after i got root and downloaded various applications, and modify built.prop to make it compatible with some games, I put the original built.prop, then i reset and after that SONY logo disappeared, the screen stayed gray ... I entered the recovery menu, load a update from SD card (the firmewares I got are txs03)
I can not update!!! if somebody can help me.. please, let me know
My padfone was bricked when I tried to replace the recovery by TWRP via goomanager (TWRP official recommended).
The procedure of goomanager makes nothing happens, it seems like just download the TWRP package.
The problem is that phone has different protection policies compared to HTC, samsung etc and the bootloader (fastboot mode) is locked by default.
In other words, there is no such a way to connect your phone when your rom, recovery did not pass the verification unless unlock the bootloader by ASUS official tool and void warranty before your operations.
If the recovery or roms did not pass the validation then the left-top corner of screen will show 'invalid kernel' and the phone haven't been unlocked to be premised to visit fastboot mode then the phone will be bricked.
I think there is two way to unbrick, the first is to unlock the bootloader by external connector, the other is to flash official recovery data by external. But when I tried to search solutions, I got nothing about padfone A66 even that RIFFBOX official forum.
Does anyone have an ideal to help me break the difficult circumstances?
s943035 said:
My padfone was bricked when I tried to replace the recovery by TWRP via goomanager (TWRP official recommended).
The procedure of goomanager makes nothing happens, it seems like just download the TWRP package.
The problem is that phone has different protection policies compared to HTC, samsung etc and the bootloader (fastboot mode) is locked by default.
In other words, there is no such a way to connect your phone when your rom, recovery did not pass the verification unless unlock the bootloader by ASUS official tool and void warranty before your operations.
If the recovery or roms did not pass the validation then the left-top corner of screen will show 'invalid kernel' and the phone haven't been unlocked to be premised to visit fastboot mode then the phone will be bricked.
I think there is two way to unbrick, the first is to unlock the bootloader by external connector, the other is to flash official recovery data by external. But when I tried to search solutions, I got nothing about padfone A66 even that RIFFBOX official forum.
Does anyone have an ideal to help me break the difficult circumstances?
Click to expand...
Click to collapse
even after bootloader unlock still got invalid kernel.. and there is no way to connect the device to pc in this case.
Hi, i did fix "invalid kernel" via jtag
Jig
nicolayer said:
Hi, i did fix "invalid kernel" via jtag
Click to expand...
Click to collapse
Hi!
I heave the same problem on my a66 "invalid kernel"!
I would bee wery thankful i you would describe a little bit more about that how you fixed using jig!
My phone is dead for 6 months, it would be great to fix it!
+ 1
Anyone here succeeded in unbricking?
in Windows 7 64 devicemanger the phone does show up as: ASUS android bootloader interface. In other words; Windows can see the phone.
What if you connect the bricked phone to a Linuxcomputer. Would that help? I mean, System and Storage are all on one single eMMc inside the phone. Is there no way to access this and read - write on it?
Nicolayer: you'r still there? A tutorial would be much appreciated.
signed .hex file needed
Hi guys!
Maybe I founded a soution for unbrick asus A66 with qualcomm download mode.
form teh pst ( http://forum.xda-developers.com/showthread.php?t=2136738 ) I take qlod.py and other stuff, just dosen't work because need proer signed MPRG8260.hex file for waking up the phone from a "deep sleep".
This "invalid kernel" has just happened to me for the second time when downgrading to 4.0.3 ICS using TWRP and I'm rather frustrated right now. I'm posting here because I am highly interested in a way to fix this that does not involve ASUS, which I've already done.
What's the deal with this signed MPRG8260.hex file? Also, is there anything new concerning a fix using JTAG? Is there anyone out there who can fix it and would offer a repair? I really want to get this brick back to life.
Thanks in advance,
-L
Padfone A66 JTAG fix for invalid kernel
<delete please>
missing files
my new information is...
QPST and Qualcomm QDload driver need.
manulal for emmcswdownload you can find on the internet
sahara.xml
8260mprg.mbn
8260_msimage.mbn
rawprogram0.xml
patch0.xml
and need a full firmware.
anybody have got these files?
I fnid *.mbn files (on chinese sites) but all was died...
s943035 said:
Mi padfone se bloqueó cuando intenté reemplazar la recuperación por TWRP a través de goomanager (recomendado por el oficial de TWRP).
El procedimiento de goomanager hace que no pase nada, parece que simplemente descargue el paquete TWRP.
El problema es que el teléfono tiene diferentes políticas de protección en comparación con HTC, Samsung, etc. y el gestor de arranque (modo de arranque rápido) está bloqueado de forma predeterminada.
En otras palabras, no existe tal manera de conectar su teléfono cuando su rom, la recuperación no pasó la verificación a menos que desbloquee el cargador de arranque con la herramienta oficial de ASUS y anule la garantía antes de sus operaciones.
Si la recuperación o las roms no pasaron la validación, la esquina superior izquierda de la pantalla mostrará 'kernel no válido' y el teléfono no se ha desbloqueado para visitar el modo fastboot, entonces el teléfono se bloqueará.
Creo que hay dos formas de desbloqueo, la primera es desbloquear el cargador de arranque mediante un conector externo, la otra es actualizar los datos de recuperación oficiales mediante un conector externo. Pero cuando traté de buscar soluciones, no obtuve nada sobre padfone A66 ni siquiera en el foro oficial de RIFFBOX.
¿Alguien tiene un ideal que me ayude a romper las circunstancias difíciles?
Click to expand...
Click to collapse
Mod edit - translated by https://www.deepl.com/translator
Hello, I have exactly the same problem, KERNEL NOT VALID on my asus a66 and it is incredible that 11 years later there is still no other solution than RIFF JTAG to solve this, however for the asus A68 if it exists, it is very strange, The mobile turns on but the computer does not detect it, any help?
***********************
Hola, tengo exactamente el mismo problema, KERNEL NO VÁLIDO en mi asus a66 y es increíble que 11 años después todavía no haya otra solución que no sea RIFF JTAG para solucionar esto, sin embargo para el asus A68 si existe, es muy raro, El móvil enciende pero no lo detecta el ordenador, alguna ayuda?
kevin_23 said:
Mod edit - translated by https://www.deepl.com/translator
Hello, I have exactly the same problem, KERNEL NOT VALID on my asus a66 and it is incredible that 11 years later there is still no other solution than RIFF JTAG to solve this, however for the asus A68 if it exists, it is very strange, The mobile turns on but the computer does not detect it, any help?
***********************
Hola, tengo exactamente el mismo problema, KERNEL NO VÁLIDO en mi asus a66 y es increíble que 11 años después todavía no haya otra solución que no sea RIFF JTAG para solucionar esto, sin embargo para el asus A68 si existe, es muy raro, El móvil enciende pero no lo detecta el ordenador, alguna ayuda?
Click to expand...
Click to collapse
@kevin_23
As courtesy I've translated your above post. With reference to rule no. 4 of the XDA Forum Rules, please post in English or add at least an English translation to your Spanish posts.
Spoiler: Rule No. 4
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
Hello!
I am using Sony Xperia Go ST27i. I had a pattern lock on phone and my younger brother tried to unlock my phone. he draw the pattern 20 times wrong and now my phone is asking for security question and my account details. i forgot what was the answer of my security question and also my phone is not connected to the internet so I can't enter my account details untill its connect to internet. I am trying to Factory Reset my phone. I have tried to go into recovery mode but my phone only vibrates 3 times and nothing happens when i try to go in recovery mode. i have also tried flashing it with xperia flashtool by andryoxide. but error occured when i try to do that. it shows this error "the processing of loader.sin completed with errors" and then Flashing aborted. plz someone help me.
Thank you
Hi,
Have you tried using PC Companion?
1. Install PC Companion from Sony Mobile's website ( http://support.sonymobile.com/gb/tools/pc-companion// )
2. Connect your phone to your computer and when it detects, press Support Zone.
3. Choose Software Update, and there'll be a pop up
4. Press Recover phone (Might say little different, but it is blue in letters)
And now you should be able to factory reset your phone.
Helpme please con mi Xperia Go ST27i..!
Amigos buenas tardes mira tengo un sony xpeia go st27i se me queda en encendido infinito ya usa pc compation y nada le di combinacion de teclas y solo logro apagarlo. Por casualidad vi tu video y me llamo la atencion y me meti needroom y para mi modelo hay 2 lin de descargas uno que dice Xperia ST27i GO / a y la otra que dice FIX. Te pregungo como manejo estas 2 carpetas que ya desgargues en el flash tool por favor explicame por que no se en que parte coloco esas carpetas,
Hola, tengo el samsung galaxy s4 SCH-I545 android lollipop 5.0.1 rooteado, sucede que hoy instale el TWRP sin haber liberado el bootloader y ahora el dispositivo solo dice: Start up Failded Your device didn't start up successfully. Use the verizon software repair assistant.... pero cuando conecto el dispositivo no me deja darle a reparar en el programa, y cuando lo apago solo vibra, vibra y vibra... AYUDA PORFAVOR! :crying: :crying: :crying:
Hi, I have samsung galaxy s4 SCH-I545 lollipop 5.0.1 android rooted, happens today to install the TWRP without the bootloader is released and now the device only says: Start up Failded Your device did not start up successfully. Use the verizon software repair assistant... but when I connect the device will not let me give it to repair the program, and when I turn off it just vibrates, vibrates, and vibra... HELP PLEASE! :crying: :crying: :crying:
Contacto/Contact
Facebook: Axel Espiritusanto
Hotmail: [email protected]
Didn't see my thread , huh?
http://forum.xda-developers.com/galaxy-s4-verizon/general/guide-sch-i545-vrugof1-look-t3395833
(Raising topic in English).
Greetings to all the members of this great Community.
I come to the Forum for some suggestions to try to revive this Cell Phone.
This is the Sony Xperia XZ1 (Trying to solve the problem on the mobile).
Well, from my point of view I have noticed the following:
-The phone does not take charge.
-When Connecting the Charger does not turn on the Led Lights.
-Do not enter Recovery Mode.
-I can not Flash some FTF because it does not enter Mode.
-When connecting to the PC, the PC does not recognize the device but immediately turn it off and press Volume Down (Fastboot Mode), in the Device Manager, in the Section (Other Device) there is a device called QUSB_BULK that needs Driver to install.
Note:
I have left Loading up to 2 hours and nothing,
To see who helps to revive the mobile, I will thank you for the help.
What idea could I give for the Possible Solution?
This forums needs you post English only.
(en este foro no se permiten post que no sean inglés. Por lo que dices yo diría posiblemente es problema del puerto usb, por eso no carga y no lo reconoce el pc. El recovery no sale si tienes el cel stock). Lo encuentras en, por ejemplo
https://www.etradesupply.com/sony-xperia-xz1-charging-port-flex-cable-grade-s.html
https://www.amazon.com/Plug-Cable-Repair-Xperia-Compact/dp/B07FNDTY1M