HDMI Cable Compatability - Nexus 6 Accessories

Hey guys I'm wondering if any of you have encountered this cable before
http://www.motorola.com/us/accessory-family-page-1/1080p-HDMI-Cable-(15ft)/15-ft-hdmi-cable.html
I bought 3, with the idea to use them with my Nexus 6 but low and behold they actually don't fit. Any idea Why? I'm sure its made for a certain brand of phones, (I thought Motorola) but apparently not.

dynamo147 said:
Hey guys I'm wondering if any of you have encountered this cable before
http://www.motorola.com/us/accessory-family-page-1/1080p-HDMI-Cable-(15ft)/15-ft-hdmi-cable.html
I bought 3, with the idea to use them with my Nexus 6 but low and behold they actually don't fit. Any idea Why? I'm sure its made for a certain brand of phones, (I thought Motorola) but apparently not.
Click to expand...
Click to collapse
That actually says that it is an HDMI cable, not an MHL-HDMI cable or other similar such cable that has HDMI on one end and uUSB on the other. Looks like it has a micro-HDMI on one end, and a regular-HDMI on the other. Nexus 6 does NOT have a micro-HDMI socket.
Also remember that Motorola sells things that are NOT EVEN PHONES, like video baby monitors. Maybe some of their video baby monitors have HDMI output so you can plug it into a TV and swap input when you need to check on the little one.
In any case, you'd be better off with a chromecast than a cable. No point in tying yourself with a wire when you can just select "cast screen" from the main pulldown menu.

That is for the Motorola XOOM. The XOOM tablet has a micro-HDMI output port. My Nexus 10 tablet has it also. It's not for the Nexus 6.

doitright said:
That actually says that it is an HDMI cable, not an MHL-HDMI cable or other similar such cable that has HDMI on one end and uUSB on the other. Looks like it has a micro-HDMI on one end, and a regular-HDMI on the other. Nexus 6 does NOT have a micro-HDMI socket.
Also remember that Motorola sells things that are NOT EVEN PHONES, like video baby monitors. Maybe some of their video baby monitors have HDMI output so you can plug it into a TV and swap input when you need to check on the little one.
In any case, you'd be better off with a chromecast than a cable. No point in tying yourself with a wire when you can just select "cast screen" from the main pulldown menu.
Click to expand...
Click to collapse
Ah yes I love chromecast i'm using it right now to watch crunchy roll lol, just that I felt that the cable would be easier to use in cases where there isn't a wifi network I can set up with but nevertheless thanks for the info! didn't know there was such a thing as MHL-HDMI it just, like you said, really looks like it has a micro-HDMI on the end, unfortunately for me lol

PaisanNYC said:
That is for the Motorola XOOM. The XOOM tablet has a micro-HDMI output port. My Nexus 10 tablet has it also. It's not for the Nexus 6.
Click to expand...
Click to collapse
Ahh I see! Shame because I got really excited about being able to carry the cable around wherever I go lol

dynamo147 said:
Ahh I see! Shame because I got really excited about being able to carry the cable around wherever I go lol
Click to expand...
Click to collapse
Sorry to be the bearer of bad news

dynamo147 said:
Ah yes I love chromecast i'm using it right now to watch crunchy roll lol, just that I felt that the cable would be easier to use in cases where there isn't a wifi network I can set up with but nevertheless thanks for the info! didn't know there was such a thing as MHL-HDMI it just, like you said, really looks like it has a micro-HDMI on the end, unfortunately for me lol
Click to expand...
Click to collapse
Actually.... you know that you can set up a chromecast to connect to your "android wifi tether" AP? You will need to use a different device to configure the chromecast than the one acting as an AP, but once done, you just activate wifi tethering, plug in the chromecast, and there you have it without even needing a local wifi network!
---------- Post added at 04:22 PM ---------- Previous post was at 04:15 PM ----------
Here is a claim that slimport will work with a simple configuration edit;
http://forum.xda-developers.com/showpost.php?p=57649906&postcount=39
*HOWEVER*, there are no details.

doitright said:
Actually.... you know that you can set up a chromecast to connect to your "android wifi tether" AP? You will need to use a different device to configure the chromecast than the one acting as an AP, but once done, you just activate wifi tethering, plug in the chromecast, and there you have it without even needing a local wifi network!
---------- Post added at 04:22 PM ---------- Previous post was at 04:15 PM ----------
Here is a claim that slimport will work with a simple configuration edit;
http://forum.xda-developers.com/showpost.php?p=57649906&postcount=39
*HOWEVER*, there are no details.
Click to expand...
Click to collapse
That guy was a troll. The hardware is not in the nexus 6 for either Slimport OR MHL.
Personally, I use chromecast to mirror my screen in the house as well as in my car on my Appradio3. I do as you said with the hotspot on my nexus 6 with the chromecast set to connect to it.

PaisanNYC said:
Sorry to be the bearer of bad news
Click to expand...
Click to collapse
Yeah it happens >,<, welp the more you know!

doitright said:
Actually.... you know that you can set up a chromecast to connect to your "android wifi tether" AP? You will need to use a different device to configure the chromecast than the one acting as an AP, but once done, you just activate wifi tethering, plug in the chromecast, and there you have it without even needing a local wifi network!
---------- Post added at 04:22 PM ---------- Previous post was at 04:15 PM ----------
Here is a claim that slimport will work with a simple configuration edit;
http://forum.xda-developers.com/showpost.php?p=57649906&postcount=39
*HOWEVER*, there are no details.
Click to expand...
Click to collapse
Oh snap that would be like a crap ton easier >,< truth lol learned something new

Nacho~ said:
That guy was a troll. The hardware is not in the nexus 6 for either Slimport OR MHL.
Personally, I use chromecast to mirror my screen in the house as well as in my car on my Appradio3. I do as you said with the hotspot on my nexus 6 with the chromecast set to connect to it.
Click to expand...
Click to collapse
Do trolls really have nothing better to do :/? But yeah that hotspot idea sounds pretty good ^.^

Nacho~ said:
That guy was a troll. The hardware is not in the nexus 6 for either Slimport OR MHL.
Personally, I use chromecast to mirror my screen in the house as well as in my car on my Appradio3. I do as you said with the hotspot on my nexus 6 with the chromecast set to connect to it.
Click to expand...
Click to collapse
Could be. However....
The *hardware* is definitely there -- mhl/slimport is built in to the SoC, and there must be a USB switch in order for it to even select between different USB modes. The only actual question is whether or not it is wired correctly. I *HATE* it when hardware vendors wire things wrong.

doitright said:
Could be. However....
The *hardware* is definitely there -- mhl/slimport is built in to the SoC, and there must be a USB switch in order for it to even select between different USB modes. The only actual question is whether or not it is wired correctly. I *HATE* it when hardware vendors wire things wrong.
Click to expand...
Click to collapse
Couldnt it also be true that the actualy micro USB port is missing the required pins for slimport or mhl? Not every micro usb is created equal.

Nacho~ said:
Couldnt it also be true that the actualy micro USB port is missing the required pins for slimport or mhl? Not every micro usb is created equal.
Click to expand...
Click to collapse
Nope. EVERY uUSB plug *IS* created equal.
MHL does not use any pins in the USB plug that are otherwise not there. USB plugs, whether they are MHL or not, have precisely 5 pins;
+5VDC, GRD, D+, D-, ID.
ALL of the pins are required and NOT OPTIONAL.
D+ and D- are the actual data pins.
+5 and GRD are POWER.
ID is the "type selection" pin.
Behind the plug itself, is a SWITCH, which is controlled by the state of the ID pin. The amount of resistance between the ID pin and GRD determines what "mode" the switch is in. And yes, there is a switch, since it is well established that the device DOES support USB OTG.
So on one side of the switch, is a USB plug. On the other side is USB HOST, USB OTG, MHL, TTY, and a bunch of other kinds of functions. Like I said, ID determines what the USB plug is actually connected to.
But like I said, I can't tell you if the MHL wires between the switch and the SoC are physically present.

doitright said:
Nope. EVERY uUSB plug *IS* created equal.
MHL does not use any pins in the USB plug that are otherwise not there. USB plugs, whether they are MHL or not, have precisely 5 pins;
+5VDC, GRD, D+, D-, ID.
ALL of the pins are required and NOT OPTIONAL.
D+ and D- are the actual data pins.
+5 and GRD are POWER.
ID is the "type selection" pin.
Behind the plug itself, is a SWITCH, which is controlled by the state of the ID pin. The amount of resistance between the ID pin and GRD determines what "mode" the switch is in. And yes, there is a switch, since it is well established that the device DOES support USB OTG.
So on one side of the switch, is a USB plug. On the other side is USB HOST, USB OTG, MHL, TTY, and a bunch of other kinds of functions. Like I said, ID determines what the USB plug is actually connected to.
But like I said, I can't tell you if the MHL wires between the switch and the SoC are physically present.
Click to expand...
Click to collapse
Well sir. That was an excellent post. Thank you for kindly explaining. I concede.

doitright said:
Nope. EVERY uUSB plug *IS* created equal.
MHL does not use any pins in the USB plug that are otherwise not there. USB plugs, whether they are MHL or not, have precisely 5 pins;
+5VDC, GRD, D+, D-, ID.
ALL of the pins are required and NOT OPTIONAL.
D+ and D- are the actual data pins.
+5 and GRD are POWER.
ID is the "type selection" pin.
Behind the plug itself, is a SWITCH, which is controlled by the state of the ID pin. The amount of resistance between the ID pin and GRD determines what "mode" the switch is in. And yes, there is a switch, since it is well established that the device DOES support USB OTG.
So on one side of the switch, is a USB plug. On the other side is USB HOST, USB OTG, MHL, TTY, and a bunch of other kinds of functions. Like I said, ID determines what the USB plug is actually connected to.
But like I said, I can't tell you if the MHL wires between the switch and the SoC are physically present.
Click to expand...
Click to collapse
Thank you very much for posting that. I learned a lot!

Someone here may find this to be highly interesting;
https://github.com/CyanogenMod/andr...mmit/c38529bf56dae15e70022641d6b15b4b856d33fb

doitright said:
Someone here may find this to be highly interesting;
https://github.com/CyanogenMod/andr...mmit/c38529bf56dae15e70022641d6b15b4b856d33fb
Click to expand...
Click to collapse
So, I guess the question becomes:
What would have to be done to achieve hardware video output on a Nexus 6?

doitright said:
Someone here may find this to be highly interesting;
https://github.com/CyanogenMod/andr...mmit/c38529bf56dae15e70022641d6b15b4b856d33fb
Click to expand...
Click to collapse
So I'm not really code savy or phone hardware adept, but I figure that the disabled string would have to be changed to enabled annnnnd, the N6 might have to be opened a tad to expose the port to make the necessary changes?

dynamo147 said:
So I'm not really code savy or phone hardware adept, but I figure that the disabled string would have to be changed to enabled annnnnd, the N6 might have to be opened a tad to expose the port to make the necessary changes?
Click to expand...
Click to collapse
That's my best guess as well (my skill level is definitely low), but I doubt it's so simple.

Related

How to creat a USB port for the Transformers do not dock ?

I don't buy Transformers enclosed dock so I could try to create a USB host port for the machine. I use two USB host connected to each other (as shown) with the correct wire colors including red, black, blue and white.
However, it does not work, exactly what the machine does not respond when the USB plug. I thought maybe it needs a 5V source to power USB operation, but do not know how.
Who can help me this? Thanks.
Did you try an USB3 Female-to-Female adaptor?
I am pretty sure it uses different pins for dock. Also, I have a feeling that USB host hardware is located in the keyboard, because when dock is detached I only see 1 USB port in console, instead of 3. However, it's probably possible to somehow switch that port to a host mode.
Added: Nwm, lsusb works a bit different than on desktop linux. It only shows host port when something is attached to it. So, there are 4 USBs on transformer. 1 usb client, and 3 hosts.(probably a usb hub in the keyboard) So, it looks like there is host on the tablet itself, just need to find the correct pins.
gr_andyx said:
Did you try an USB3 Female-to-Female adaptor?
Click to expand...
Click to collapse
I don't know the female-to-female USB, but I think that I am creating is it.
I think the problem lies in the cord is too long may not get external USB device. Is there a way to grant more power to it?
HungSanity said:
I think the problem lies in the cord is too long may not get external USB device. Is there a way to grant more power to it?
Click to expand...
Click to collapse
-_- The problems lies in the fact that it's not a USB HOST.
HungSanity said:
I don't buy Transformers enclosed dock so I could try to create a USB host port for the machine. I use two USB host connected to each other (as shown) with the correct wire colors including red, black, blue and white.
However, it does not work, exactly what the machine does not respond when the USB plug. I thought maybe it needs a 5V source to power USB operation, but do not know how.
Who can help me this? Thanks.
Click to expand...
Click to collapse
Don't put to much time, effort and energy into this.
Read the following:
Comming Asus Transformer accesories
JEV66 said:
Don't put to much time, effort and energy into this.
Read the following:
Comming Asus Transformer accesories
Click to expand...
Click to collapse
I wouldn't hold your breath waiting for these.
fader01 said:
I wouldn't hold your breath waiting for these.
Click to expand...
Click to collapse
Yeah, to be quite honest Asus completely blows as far as hardware support for this product is concerned. It's hard enough trying to find a REPLACEMENT charger let alone hold out hope of aftermarket accessories.
And the adapter looks huge. I prefer a cable.
aligatro2010 said:
-_- The problems lies in the fact that it's not a USB HOST.
Click to expand...
Click to collapse
Are you sure? There are a lot of signal wires in the 40 pin cable. It makes more sense if there is at least one host among some of those wires. If we grab power off the three + power lines in the 40 pin proprietary plug we could drive a small hub.
I was hoping to see some of these (hundreds available from dealextreme.com) modded for the tablet.
Bob Smith42 said:
Are you sure? There are a lot of signal wires in the 40 pin cable. It makes more sense if there is at least one host among some of those wires. If we grab power off the three + power lines in the 40 pin proprietary plug we could drive a small hub.
I was hoping to see some of these (hundreds available from dealextreme.com) modded for the tablet.
Click to expand...
Click to collapse
Wait too long accessories. Testing this stuff is very interesting though unsuccessful, hehe. I'm looking for a USB host power supply itself to see why. Hope everything good change.
Bob Smith42 said:
Are you sure? There are a lot of signal wires in the 40 pin cable. It makes more sense if there is at least one host among some of those wires. If we grab power off the three + power lines in the 40 pin proprietary plug we could drive a small hub.
I was hoping to see some of these (hundreds available from dealextreme.com) modded for the tablet.
Click to expand...
Click to collapse
Yes, there is definitely a USB host on that 40 pin connector, but the way OP connected cable won't work because that connector on the cable only connects to the USB client. In other words, it uses wrong pins.
I'd offer some help but the forum rules state your post has to be in English.

DIY Accessories - anything goes (almost)

Seems to be a perfect fit for the ASUS 40 pin connector.
Now we have to decide WHAT to make. I was thinking about a few items, but your suggestions needed.
Wheeeeeeee....
Note: There may be other places to get it, but this is the first place I found it.
Mouser Part #: 571-2129276-1
Manufacturer Part #:
2129276-1
Manufacturer:
TE Connectivity
Description: I/O Connectors 40P CABLE MNT PLUG CHAMP DOCKING
Stock: 1,070 Can Ship Immediately
Pricing (USD)
1: $3.49
10: $3.14
25: $2.85
100: $2.71
PS: These are very small connection points, so you need to have special soldering equipment (sub-mm tips).
Well, maybe start with USB Host?
My suggestions:
- USB-Hub like Soundsurfer said
- Infrared adapter to control your home cinema (i saw that the new sony tablet s has it built in. maye we can port the software?)
- DVB-t
greetings
SoundSurfer said:
Well, maybe start with USB Host?
Click to expand...
Click to collapse
Great idea. I like it a lot.
I ordered a couple of these ACT4060 items:
ACT4060A SOP-8 ACT4060 Wide Input 2A Step Down
The idea is to take 15V from the tablet or charger and step down to 5V to power a USB hub, similar the the ASUS USB host device (same part).
I also thought to add a 5.5mm female barrel socket for charging with a 15V power supply, like these: Power Supply DC 15V
Note: Many other power supply are available from 12V-15V with 5.5mm barrel plug.
---------- Post added at 03:26 PM ---------- Previous post was at 03:22 PM ----------
w04g005 said:
My suggestions:
- USB-Hub like Soundsurfer said
- Infrared adapter to control your home cinema (i saw that the new sony tablet s has it built in. maye we can port the software?)
- DVB-t
greetings
Click to expand...
Click to collapse
Great, thanks!
I do not think the HDMI output is on the 40 pin cable, but I could be wrong. There is audio available, because it is on the TF101 Desktop Stand.
Any links to an infrared control?
Bob Smith42 said:
Any links to an infrared control?
Click to expand...
Click to collapse
Sorry,
i have no link for infrared control. I only have seen the video with infrared remote from the tablet s
http://www.youtube.com/watch?v=tbYzckPXJ2Q&feature=player_embedded
But we can try to combine a standard usb infrared adapter with the 40-pin connector. Maybe it doesn't work because of the lack of drivers (if they couldn't get extracted from the sony tablet). But i have to say that i'm neither a electronic technician nor a programmer. Only wanted to suggest my wishes ;-)
Maybe this can help:
http://www.irdroid.com/
greetings
Can you make a regular USB cable with this connector ?
question: do you have the pin out of the 40-pin connector?
w04g005 said:
- Infrared adapter to control your home cinema (i saw that the new sony tablet s has it built in. maye we can port the software?)
Click to expand...
Click to collapse
This would be a great idea - this sort of feature makes the Sony offering stand out in an otherwise fairly homogenous tablet market. Don't know anything about how to do this though, but will post back if I manage to find out anything useful...
fisha21 said:
This would be a great idea - this sort of feature makes the Sony offering stand out in an otherwise fairly homogenous tablet market. Don't know anything about how to do this though, but will post back if I manage to find out anything useful...
Click to expand...
Click to collapse
Ok, i assume 2 or 3 pins on the 40-pin connector are for audio signals because the dock has an audio out! we could connect some irda leds to the pins like shown in this project:
www.irdroid.com
But i have to say that i read today about a new logitech product called: logitech harmony link
www.logitech.com/en-us/remotes/universal-remotes/devices/harmony-link
i think i will buy these to replace my harmony one.
greetings
Matthias
how about a mini usb cord? So I could plug my DSLR camera into it and download the pictures on the fly?..or even a micro to plug the phone in...but if it was a USB hub, it would work as well..just a longer cord.
w04g005 said:
Ok, i assume 2 or 3 pins on the 40-pin connector are for audio signals because the dock has an audio out! we could connect some irda leds to the pins like shown in this project:
www.irdroid.com
Click to expand...
Click to collapse
Quick look on Google shows up this serial IR transceiver made by IguanaWorks. I'm afraid my electronics knowledge is very limited, but could the serial connector be replaced by these Asus-compatible adapters. I suspect the main problem might be the way the transceiver draws charge from the serial port to charge up the capacitor? According to the website, it uses LIRC so either the Irdroid or Androlirc apps might work (Androlirc requires an audio-IR device, so may need some tweaking, but is apparently open-source).
The other option might be the Newkinetix Re - whether it would be possible to replace the iThing connector with the ones you have located. Of course, the app is only for iOS, so yet another stumbling block.
I'm only feeding back the results of my digging, lack any of the required skills to make any of this work, so forgive if it all misses the mark completely.
w04g005 said:
But i have to say that i read today about a new logitech product called: logitech harmony link
www.logitech.com/en-us/remotes/universal-remotes/devices/harmony-link
Click to expand...
Click to collapse
Of course, this does also look pretty good, if you don't mind the IR extender "spiders" ... and the fact that the TV guide feature is only available for iPad (grr!)
I thought this thread would be more popular. If the plug didn't cost so much to ship to my country I'd be building a wall charger with a long lead and a car charger.
Sent from my u8800 using XDA App
That's a nice find! Now if only we knew some technical details about the connector pin-out.. I guess a good start would be looking at what both docks have inside and the connector routings, I doubt they use any external electronics, so should be quite easy to do cool things.
EDIT: at least now we'll be able to do another cable.. buy a standard USB 3.0, cut one end out and solder the new connector. A bit of cleaning everything up and ready to go.
PatrickVogeli said:
That's a nice find! Now if only we knew some technical details about the connector pin-out.. I guess a good start would be looking at what both docks have inside and the connector routings, I doubt they use any external electronics, so should be quite easy to do cool things.
EDIT: at least now we'll be able to do another cable.. buy a standard USB 3.0, cut one end out and solder the new connector. A bit of cleaning everything up and ready to go.
Click to expand...
Click to collapse
I finally got my USB Host Kit for the TF, so I can work on the connector pin out. The USB Kit did not work (for me) on the dock 40 pin socket, so apparently there are differences between the Dock and Tablet 40 pin sockets.
Can anyone can confirm the USB Kit does/does not work on the dock 40 pin socket?
Thanks
fisha21 said:
Quick look on Google shows up this serial IR transceiver made by IguanaWorks. I'm afraid my electronics knowledge is very limited, but could the serial connector be replaced by these Asus-compatible adapters. I suspect the main problem might be the way the transceiver draws charge from the serial port to charge up the capacitor? According to the website, it uses LIRC so either the Irdroid or Androlirc apps might work (Androlirc requires an audio-IR device, so may need some tweaking, but is apparently open-source).
The other option might be the Newkinetix Re - whether it would be possible to replace the iThing connector with the ones you have located. Of course, the app is only for iOS, so yet another stumbling block.
I'm only feeding back the results of my digging, lack any of the required skills to make any of this work, so forgive if it all misses the mark completely.
Of course, this does also look pretty good, if you don't mind the IR extender "spiders" ... and the fact that the TV guide feature is only available for iPad (grr!)
Click to expand...
Click to collapse
Seems many people like infra-red controls. Here is some pics of the I-Got-Control device for the iPod/iPad/iPhone.
There seems to be only a few lines connected to the Apple 30 pin connector. Does anyone have the pin-out for Apple 30 pin connectors?
I think this might be easily attached to the Asus USB Host or SD adapter.
Thanks!
a backpack style add-on for the TF would be neat...something that adds a battery/usb/etc at the cost of making it a bit fatter and maybe taller..
Sent from my Transformer TF101 using xda premium
Any updates on this?
Amazed at how hard it is to find a 30-pin connector pinout, seems Apple tweaked it a bit as new generations came along.
This is the kind of thread I love to see, on Android+TF!
Sent from my Nexus S using Tapatalk
If I were to solder every connector point through a wire, would connecting the dock from the side through the 40 pin connector to the bottom slot of the TF give the same communication as if the TF is docked? Been wanting to "dock" the tablet without actually having them together.
Yeah, it would work, but instead of soldering better find connectors and a cable. I'm thinking of doing it to my USB adaptor (which is very badly done, completely loose).
Bob Smith42 said:
Does anyone have the pin-out for Apple 30 pin connectors?
Click to expand...
Click to collapse
Isn't that available all over the net?
pinouts.ru /PortableDevices/ipod_pinout.shtml
Cheers!
-M
Xda member since 2007

[Q] Atrix Lapdock & MHL TO HDMI. ?

hey.
i have sailed the internetz looking for answers for this. but i thought ild ask what everyone else thought.
would atrix lapdock work with sg2? (with mods off course) like changing the connectors about. and using a mhl to hdmi cable?
i was looking at the connectors and it is a micro hdmi and a micro usb if im not wrong..
whats everyones thoughts to this???
Timoxa said:
hey.
i have sailed the internetz looking for answers for this. but i thought ild ask what everyone else thought.
would atrix lapdock work with sg2? (with mods off course) like changing the connectors about. and using a mhl to hdmi cable?
i was looking at the connectors and it is a micro hdmi and a micro usb if im not wrong..
whats everyones thoughts to this???
Click to expand...
Click to collapse
My thoughts; not sure if serious...
ctomgee said:
My thoughts; not sure if serious...
Click to expand...
Click to collapse
what do you mean by that? its a valid question.
i know for sure you can connect your sg2 to the hdmi to display. but its the trackpad and keyboard im wondering about the most?
Timoxa said:
what do you mean by that? its a valid question.
i know for sure you can connect your sg2 to the hdmi to display. but its the trackpad and keyboard im wondering about the most?
Click to expand...
Click to collapse
NO.
Atrix has two different output ports. Micro USB for charging and data transfer, and micro-HDMI for TV-out. The laptop dock specific (I stress specific) for the Atrix uses BOTH of these ports in conjuction.
Galaxy S2 has ONE output port, a micro USB port that doubles for charging/data transfer, and connection to the optional MHL adapter accessory.
In NO WAY would you be able to MacGyver the Galaxy S2 to use the Atrix laptop dock.
ctomgee said:
NO.
Atrix has two different output ports. Micro USB for charging and data transfer, and micro-HDMI for TV-out. The laptop dock specific (I stress specific) for the Atrix uses BOTH of these ports in conjuction.
Galaxy S2 has ONE output port, a micro USB port that doubles for charging/data transfer, and connection to the optional MHL adapter accessory.
In NO WAY would you be able to MacGyver the Galaxy S2 to use the Atrix laptop dock.
Click to expand...
Click to collapse
alright. well thanks for the answer. guess il have to look for another idea. possibly using portable hd screen and a bluetooth mouse and keyboard.
cheers anyway.
ctomgee said:
NO.
Atrix has two different output ports. Micro USB for charging and data transfer, and micro-HDMI for TV-out. The laptop dock specific (I stress specific) for the Atrix uses BOTH of these ports in conjuction.
Galaxy S2 has ONE output port, a micro USB port that doubles for charging/data transfer, and connection to the optional MHL adapter accessory.
In NO WAY would you be able to MacGyver the Galaxy S2 to use the Atrix laptop dock.
Click to expand...
Click to collapse
Timoxa said:
alright. well thanks for the answer. guess il have to look for another idea. possibly using portable hd screen and a bluetooth mouse and keyboard.
cheers anyway.
Click to expand...
Click to collapse
You know... it just might work. The atrix lapdock does feed 5v power up the usb port which you could adapt from micro usb to whichever varient you need on your MHL cable. This would provide the power necessary to drive the hdmi circuitry that you had feeding into the micro hdmi input of the lapdock. Obviously you wouldnt have a true 'dock' but it sounds like you understand that. As long as your phone detected the mouse and keyboard as input devices it should work. Not sure how that operates with an MHL cable. It might require USB OTG, and im not sure if that is available over the USB connectivity provided by MHL. You could try with a standard usb keyboard If that works, then the lapdocks should too.
I know for certain that you can use the lapdock as the screen by just connecting the video out of the MHL adapter to the lapdock, and a usb power only cable (for the MHL adapter) to the lapdocks normal USB charge ports.
There is a thread called Lapdock HDMI that has more details!
http://forum.xda-developers.com/showthread.php?t=1376679
As for the person saying it is or was impossible... you so sure now?
phire420 said:
You know... it just might work. The atrix lapdock does feed 5v power up the usb port which you could adapt from micro usb to whichever varient you need on your MHL cable. This would provide the power necessary to drive the hdmi circuitry that you had feeding into the micro hdmi input of the lapdock. Obviously you wouldnt have a true 'dock' but it sounds like you understand that. As long as your phone detected the mouse and keyboard as input devices it should work. Not sure how that operates with an MHL cable. It might require USB OTG, and im not sure if that is available over the USB connectivity provided by MHL. You could try with a standard usb keyboard If that works, then the lapdocks should too.
Click to expand...
Click to collapse
ive seen some mhl cables online which have a micro usb port on the side also. so you can plug in the micro hdmi and usb at the same time .. not as the other guy said. anyway im going to order the dock to see what mods i can get done. if anything promising il repost.
phire420 said:
You know... it just might work. The atrix lapdock does feed 5v power up the usb port which you could adapt from micro usb to whichever varient you need on your MHL cable. This would provide the power necessary to drive the hdmi circuitry that you had feeding into the micro hdmi input of the lapdock. Obviously you wouldnt have a true 'dock' but it sounds like you understand that. As long as your phone detected the mouse and keyboard as input devices it should work. Not sure how that operates with an MHL cable. It might require USB OTG, and im not sure if that is available over the USB connectivity provided by MHL. You could try with a standard usb keyboard If that works, then the lapdocks should too.
I know for certain that you can use the lapdock as the screen by just connecting the video out of the MHL adapter to the lapdock, and a usb power only cable (for the MHL adapter) to the lapdocks normal USB charge ports.
There is a thread called Lapdock HDMI that has more details!
http://forum.xda-developers.com/showthread.php?t=1376679
As for the person saying it is or was impossible... you so sure now?
Click to expand...
Click to collapse
That thread is from the Atrix forum. What bearing does that have on the argument on getting this working on an S2??
Have you even looked at the connections involved here?
The Atrix's micro USB and micro HDMI port are side by side, and the dock plugs into both of them.
The MHL cable plugs into the ONLY port on the S2.
So I'm certainly not an expert on the inner workings of MHL, USB, and HDMI, but from what I can gather, you would have to splice an MHL cable to separate out the USB leads from the HDMI leads, then try to run the HDMI leads into a micro HDMI female port, and run the USB leads to a female micro USB port. I don't even know if that would work with MHL in the equation. I'm fairly certain the phone detects what is plugged in and decides how to use the port, which shoots this down idea down altogether... unless more hacking is involved into the OS. Which is way above my head, and I'm not fool enough to try.
See this thread, which is admittedly for the Galaxy Nexus, but is WAY more relevant than the Atrix thread you linked, as the GNex is also manufactured by Samsung, and also uses MHL technology.
Timoxa said:
ive seen some mhl cables online which have a micro usb port on the side also. so you can plug in the micro hdmi and usb at the same time .. not as the other guy said. anyway im going to order the dock to see what mods i can get done. if anything promising il repost.
Click to expand...
Click to collapse
No - the micro USB port on the side of the MHL adapter is for power. If the HDMI port you plug into is NOT MHL compliant (and not many are, yet), you need to plug an AC adapter in to power the phone while HDMI is in use.
ctomgee said:
That thread is from the Atrix forum. What bearing does that have on the argument on getting this working on an S2??
Have you even looked at the connections involved here?
The Atrix's micro USB and micro HDMI port are side by side, and the dock plugs into both of them.
The MHL cable plugs into the ONLY port on the S2.
So I'm certainly not an expert on the inner workings of MHL, USB, and HDMI, but from what I can gather, you would have to splice an MHL cable to separate out the USB leads from the HDMI leads, then try to run the HDMI leads into a micro HDMI female port, and run the USB leads to a female micro USB port. I don't even know if that would work with MHL in the equation. I'm fairly certain the phone detects what is plugged in and decides how to use the port, which shoots this down idea down altogether... unless more hacking is involved into the OS. Which is way above my head, and I'm not fool enough to try.
See this thread, which is admittedly for the Galaxy Nexus, but is WAY more relevant than the Atrix thread you linked, as the GNex is also manufactured by Samsung, and also uses MHL technology.
No - the micro USB port on the side of the MHL adapter is for power. If the HDMI port you plug into is NOT MHL compliant (and not many are, yet), you need to plug an AC adapter in to power the phone while HDMI is in use.
Click to expand...
Click to collapse
well. theres allot of different mhl cables. even if none of them support it. splitting the usb data from the other cables on the mhl should be easy. but like i said il order one to play with. im pretty sure even if i cant do anything with the sg2 il find another use for it. would be great for a project. but many thanks for your input. sure has shed some light in the dark.
Timoxa said:
well. theres allot of different mhl cables. even if none of them support it. splitting the usb data from the other cables on the mhl should be easy. but like i said il order one to play with. im pretty sure even if i cant do anything with the sg2 il find another use for it. would be great for a project. but many thanks for your input. sure has shed some light in the dark.
Click to expand...
Click to collapse
Sure, there are a lot of MHL cables, but they are all essentially third party versions of the OEM Samsung MHL cable. (or whatever phone manufacturer you have that uses MHL - HTC, whatever)
I have high doubts ANY MHL cable will support it, since as I said, the phone will detect what type of connection is attached to decide how to send/receive signals from the port - if it sees the MHL adapter, it will do charge/HDMI; if it sees a regular USB cable, it will do charge/data transfer/OTG; if it sees an AC adapter, it does strictly charging. Notice how it can tell the difference when you have it plugged into your computer as opposed to when you have it plugged into the wall?
But if you want to go for it, good luck.
EDIT: yet another piece of info shooting this idea down.
Here's the video that he talks about in that post. Info specific on why this DOESN'T work is at about 7:25.
ctomgee said:
Sure, there are a lot of MHL cables, but they are all essentially third party versions of the OEM Samsung MHL cable. (or whatever phone manufacturer you have that uses MHL - HTC, whatever)
I have high doubts ANY MHL cable will support it, since as I said, the phone will detect what type of connection is attached to decide how to send/receive signals from the port - if it sees the MHL adapter, it will do charge/HDMI; if it sees a regular USB cable, it will do charge/data transfer/OTG; if it sees an AC adapter, it does strictly charging. Notice how it can tell the difference when you have it plugged into your computer as opposed to when you have it plugged into the wall?
But if you want to go for it, good luck.
EDIT: yet another piece of info shooting this idea down.
Here's the video that he talks about in that post.
Click to expand...
Click to collapse
i pretty much thought the usb and hdmi wouldnt work from the beginning, il have to look into modding the dock to allow bluetooth. ive have just looked at the specifications of a mhl even though they can in theory support usb and hdmi at the same time. the sg2 wont. and i cant see any software mod that would allow this. il see what sort of bluetooth mods are available. maybe incorporate stuff i have done in the past. but the dock is too good to pass by.
i think we can close this thread as its been answered.
Timoxa said:
i pretty much thought the usb and hdmi wouldnt work from the beginning, il have to look into modding the dock to allow bluetooth. ive have just looked at the specifications of a mhl even though they can in theory support usb and hdmi at the same time. the sg2 wont. and i cant see any software mod that would allow this. il see what sort of bluetooth mods are available. maybe incorporate stuff i have done in the past. but the dock is too good to pass by.
i think we can close this thread as its been answered.
Click to expand...
Click to collapse
Not to nitpick, but it's MHL 1.0 that won't support it. The GS2 just uses MHL. Who knows if there's a possibility to update it to whatever MHL 2.0 is, whenever it comes out.
Sent from my GT-I9100 using XDA App
ctomgee said:
That thread is from the Atrix forum. What bearing does that have on the argument on getting this working on an S2??
Click to expand...
Click to collapse
Noone is 'arguing', instead I am trying to be productive and help. Forgive me opening the door to actually trying it and thinking it through instead of just saying 'THERE IS NO WAY ITS POSSIBLE, OMG ATRIX FORUM'. you do know where you are.. right?
ctomgee said:
Have you even looked at the connections involved here? The Atrix's micro USB and micro HDMI port are side by side, and the dock plugs into both of them. The MHL cable plugs into the ONLY port on the S2.
Click to expand...
Click to collapse
yes, of course. you couldn't tell by my reply?
ctomgee said:
So I'm certainly not an expert on the inner workings of MHL, USB, and HDMI, but from what I can gather, you would have to splice an MHL cable to separate out the USB leads from the HDMI leads, then try to run the HDMI leads into a micro HDMI female port, and run the USB leads to a female micro USB port. I don't even know if that would work with MHL in the equation.
Click to expand...
Click to collapse
Right, which is why i even posted in the first place. First you claimed to know, now you dont know, not very helpful. and yes, i think its understood there would be cables and a potential need for splicing, as outlined in the other lapdock thread.
ctomgee said:
See this thread, which is admittedly for the Galaxy Nexus, but is WAY more relevant than the Atrix thread you linked, as the GNex is also manufactured by Samsung, and also uses MHL technology.
Click to expand...
Click to collapse
actually the other thread is perfectly relevant, if you read it, you would understand the point of the thread is a howto on interfacing the lapdock with devices OTHER than the atrix, how could it be more relevant?
phire420 said:
Noone is 'arguing'
Click to expand...
Click to collapse
Seriously? You're arguing that no one is arguing? By arguing?
phire420 said:
instead I am trying to be productive and help. Forgive me opening the door to actually trying it and thinking it through instead of just saying 'THERE IS NO WAY ITS POSSIBLE, OMG ATRIX FORUM'. you do know where you are.. right?
Click to expand...
Click to collapse
Yes, I do. In the I9100 forums. Which is based on completely different hardware and architecture than the Motorola Atrix.
phire420 said:
ctomgee said:
Have you even looked at the connections involved here? The Atrix's micro USB and micro HDMI port are side by side, and the dock plugs into both of them. The MHL cable plugs into the ONLY port on the S2.
Click to expand...
Click to collapse
yes, of course. you couldn't tell by my reply?
Click to expand...
Click to collapse
Clearly not, since you apparently understand less about how MHL works than I do.
phire420 said:
ctomgee said:
So I'm certainly not an expert on the inner workings of MHL, USB, and HDMI, but from what I can gather, you would have to splice an MHL cable to separate out the USB leads from the HDMI leads, then try to run the HDMI leads into a micro HDMI female port, and run the USB leads to a female micro USB port. I don't even know if that would work with MHL in the equation.
Click to expand...
Click to collapse
Right, which is why i even posted in the first place. First you claimed to know, now you dont know, not very helpful. and yes, i think its understood there would be cables and a potential need for splicing, as outlined in the other lapdock thread.
Click to expand...
Click to collapse
Actually, I said I'm not an expert. Not that I didn't know. That's two different things. I notice you also conveniently left off the part of my quote after the part that said "I don't even know if that would work with MHL in the equation" which read:
ctomgee said:
I'm fairly certain the phone detects what is plugged in and decides how to use the port, which shoots this down idea down altogether... unless more hacking is involved into the OS. Which is way above my head, and I'm not fool enough to try.
Click to expand...
Click to collapse
phire420 said:
actually the other thread is perfectly relevant, if you read it, you would understand the point of the thread is a howto on interfacing the lapdock with devices OTHER than the atrix, how could it be more relevant?
Click to expand...
Click to collapse
Sure, relevant. But not, at the same time. Look at post 10 of that thread. It says "The lapdock keyboard and touchpad work just like a normal USB keyboard and mouse."
Now, clearly I read the thread you linked. Did YOU read anything I linked, or watch the video featuring a spokesman from the frigging MHL consortium??? How he said HDMI out and USB will NOT work at the same time on any phone that utilizes MHL, not just the Galaxy S2? And goes on to explain why?
You started this fight with:
phire420 said:
As for the person saying it is or was impossible... you so sure now?
Click to expand...
Click to collapse
in post 6. Get off your frigging high-and-mighty-horse, and crawl back under your bridge.
Timoxa said:
i pretty much thought the usb and hdmi wouldnt work from the beginning
Click to expand...
Click to collapse
Video will work, but as ctomgee stated and linked, usb wont work at the same time
Timoxa said:
ill have to look into modding the dock to allow bluetooth.
Click to expand...
Click to collapse
good luck m8 id love to see if you can pull this off!
you can always solder in a usb-Bluetooth tx so that the keypad and keyboard will work via bluetooth and hdmi via MHL. thats the only way
rmyc said:
you can always solder in a usb-Bluetooth tx so that the keypad and keyboard will work via bluetooth and hdmi via MHL. thats the only way
Click to expand...
Click to collapse
sounds like it's a possible solution, i'm trying to find a way to use the lapdock with my galaxy s3. any idea where we can get a usb-bluetooth tx? pair this setup with allshare dongle for wireless transmission to hdmi, we'll hv a total wireless solution to connect any phone to the lapdock?!

[Q] 11 Pin MHL + USB OTG

Hey there, i have tried gathering information about this subject and it seems all threads always lead to this announcement:
http://www.gottabemobile.com/2012/06/29/galaxy-s-iii-new-mhl-connector-also-enables-usb-on-go/
Short: Samsung have changed to an 11 Pin-out to enable USB OTG and MHL Hdmi out at the same time. I purchased an original HDTV Adapter (EPL-3FHUBEGSTD) which as far as i can reliably count indeed has about 11 connectors inside the USB connector that goes into the phone.
Now, i can get HDMI out just fine, but ONLY when i also connect the MHL adapter to a power source (a PC USB Port will do fine), however i have also read, that the phone is able to power the MHL adapter itself but obviously would not be charged then (no surprises there). This does not work however.
Further, connecting a USB OTG cable to the micro usb port on the MHL adapter does nothing. No notification and no devices connecting. No power either, since the LED on my USB Hub does not light up as it should. Connecting any devices to the hub does nothing to change that situation. If i leave out the MHL adapter and connect the USB OTG cable directly to the phone, everything works perfectly. I have tried this with 2 different OTG cables so they are not the problem.
This is an original genuine HDTV Adapter for our phones, which according to that post should be working fine with USB OTG.
AFAIK, this topic --does-- come up more frequently now as i can find a few more discussions about it, albeit none really helpful:
http://android.stackexchange.com/qu...-of-11-pin-mhl-connector-in-samsung-galaxy-s3
http://forum.xda-developers.com/showthread.php?t=1743128
http://forum.xda-developers.com/showthread.php?t=1803079
http://en.wikipedia.org/wiki/Mobile_High-Definition_Link#11-pin_MHL-USB_Connector
http://forum.xda-developers.com/showthread.php?t=1811435
That wiki entry is the most interesting link as it definitely states that using MHL and USB OTG simultaneously is possible and is also the reason why the 5 pin layout was changed to an 11 Pin layout.
Looking forward to reading your replies!
the ability to use MHL and OTG simultaneously would give the S3 so much more purpose. It is powerful enough to replace a desktop computer used only for light stuff like browsing and watching videos, and even simple gaming. If samsung made a dock like the one for the motorola atrix I'm convinced they will broaden their target group. The atrix got everything right with this but is inferior hardware wise. I love the idea of a one device for everything concept. Unfortunately it doesn't rhyme very well with the growth society.
Love the MHL and the OTG is even better only after I got the correct cables as the cables changed on S3 to the S2 version, unlimited space for watching films on my phone is now awesome and even better connecting it to to the TV just need a good dock,
is there perhaps any expert advise on this? According to multiple sources it should work but really doesnt. Did i buy the wrong mhl adapter?
I think they will only both work together when being used with an MHL enabled tv. That way the power comes from the tv and the usb on the adapter can be used for the usb-otg cable.
Sent from my GT-I9300 using Tapatalk 2
But if i connected the MHL with the s3. Would sound come out of my phone AND my TV or just my TV. If it justs comes out of my TV, then can i hook up my bluetooth headphones and listen to my video or it would not allow me?
Thanks
joysleep said:
But if i connected the MHL with the s3. Would sound come out of my phone AND my TV or just my TV. If it justs comes out of my TV, then can i hook up my bluetooth headphones and listen to my video or it would not allow me?
Thanks
Click to expand...
Click to collapse
I think you already got a reply in the other thread on this, you should use subscriptions.
mertzi said:
I think you already got a reply in the other thread on this, you should use subscriptions.
Click to expand...
Click to collapse
It wasnt clear.
No1 knows the actual answer to this questions. Really frustraing
joysleep said:
It wasnt clear.
No1 knows the actual answer to this questions. Really frustraing
Click to expand...
Click to collapse
Ah ok sorry! Afaik you should be able to choose your headphones as primary audio source in the bluetooth settings. I know I can choose what I want to be output to my bluetooth headset, but I don't own an MHL adapter so I don't know about that. Someone with one should be able to try it, and if they don't own a bluetooth headset/pair of headphones they could try with wired ones and see what happens.
mertzi said:
Ah ok sorry! Afaik you should be able to choose your headphones as primary audio source in the bluetooth settings. I know I can choose what I want to be output to my bluetooth headset, but I don't own an MHL adapter so I don't know about that. Someone with one should be able to try it, and if they don't own a bluetooth headset/pair of headphones they could try with wired ones and see what happens.
Click to expand...
Click to collapse
I have recently received an MHL connector (5 pin type) and the samsung 11 to 5 pin adapter for it. I can confirm that if I plug my OTG cable into it, and then into my powered USB hub, I can get the MHL to work just fine, both video and audio. The OTG cable powers it just fine, but does NOT allow me to use other devices attached to the USB hub.
I am still researching. I suspect you need to bring all 11 pins off the phone with a splitter of some sort, or possibly wire data lines through the MHL. Probably not with the 5 pin MHL connector and 11 to 5 pin adapter, but with the full 11 pin MHL adapter. I am not up to that level of hardware hacking. I suspect whoever does it first can sell a BUNCH of them!
Oh, and I have a Moto Lapdock for my Raspberry Pi, and would love to hook my S3 to it too!
Scott

USB-C to HDMI on 6P - Tried it, as expected, didn't work.

I bought a USB-C to HDMI adapter through the Google Store, as I have a laptop with USB-C (and no HDMI Out or DIsplay Port) that I need to mirror to my 65" TV. Works great for that. (Miracast and Chromecast frequently drop the mirroring connection for me).
Just for sh*ts and giggles, I tried it on the 6P to see if it would work, even though I knew it wasn't supposed to. I can confirm that there is no video out on the 6P through the USB-C port. TV says there is no signal from the 6P.
Nothing earth shattering here. I just figured there are some people out there where in the back of their minds they were still wondering whether it might work. Put your minds at ease, it does not.
Pig Vomit said:
I bought a USB-C to HDMI adapter through the Google Store, as I have a laptop with USB-C (and no HDMI Out or DIsplay Port) that I need to mirror to my 65" TV. Works great for that. (Miracast and Chromecast frequently drop the mirroring connection for me).
Just for sh*ts and giggles, I tried it on the 6P to see if it would work, even though I knew it wasn't supposed to. I can confirm that there is no video out on the 6P through the USB-C port. TV says there is no signal from the 6P.
Nothing earth shattering here. I just figured there are some people out there where in the back of their minds they were still wondering whether it might work. Put your minds at ease, it does not.
Click to expand...
Click to collapse
Bummer, why does your Chromecast drop signal, that sounds router related.
I know Google is really pushing Chromecast, but limiting people to 720p is just sad. I've tried the experimental 1080p ChromeCast from my laptop Chrome to my Sony KDL65W850C and it just produces a broken picture. The Nexus 5 had fantastic SlimPort that I used! It was amazing for movies or testing TV inputs. Heck, I even used it for VMware Horizon View and loved it! This is a feature that Google should put into all Nexus phones.
/rant
I had to get that off my chest.
CNLiberal said:
I know Google is really pushing Chromecast, but limiting people to 720p is just sad. I've tried the experimental 1080p ChromeCast from my laptop Chrome to my Sony KDL65W850C and it just produces a broken picture. The Nexus 5 had fantastic SlimPort that I used! It was amazing for movies or testing TV inputs. Heck, I even used it for VMware Horizon View and loved it! This is a feature that Google should put into all Nexus phones.
/rant
I had to get that off my chest.
Click to expand...
Click to collapse
I agree , i know the chromecast is decent, but to actually mirror you're entire display the slimport option was so superior , no frame drops etc . shame it doesn't have it, but oh well , maybe the nexus Nexus huh.
italia0101 said:
I agree , i know the chromecast is decent, but to actually mirror you're entire display the slimport option was so superior , no frame drops etc . shame it doesn't have it, but oh well , maybe the nexus Nexus huh.
Click to expand...
Click to collapse
I'm doubting it. Google wants Cast to take over. I can see it from their POV. But the fact they want to call this PREMIUM and not having this feature...very disappointing.
I really do appreciate you trying this out. I was searching at work the other day for a USB-C to HDMI, but couldn't find one. Thanks for doing the needful!
CNLiberal said:
I'm doubting it. Google wants Cast to take over. I can see it from their POV. But the fact they want to call this PREMIUM and not having this feature...very disappointing.
I really do appreciate you trying this out. I was searching at work the other day for a USB-C to HDMI, but couldn't find one. Thanks for doing the needful!
Click to expand...
Click to collapse
Very true, but when usb c 3.1 happens isn't hdmi supported?
Sent from my Nexus 6P using Tapatalk
italia0101 said:
Very true, but when usb c 3.1 happens isn't hdmi supported?
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
It's not really HDMI that's supported. It's DisplayPort. And DisplayPort is already supported in the USB Type-C spec. Google just didn't implement it for whatever insane reason.
Check out this image. It shows that the USB Type-C ALTERNATE MODE uses pins A2, A3 and A10, A11. These can be for either high speed USB3, or for DisplayPort.
CNLiberal said:
It's not really HDMI that's supported. It's DisplayPort. And DisplayPort is already supported in the USB Type-C spec. Google just didn't implement it for whatever insane reason.
Check out this image. It shows that the USB Type-C ALTERNATE MODE uses pins A2, A3 and A10, A11. These can be for either high speed USB3, or for DisplayPort.
Click to expand...
Click to collapse
Ah I see! So it's a choice that they didn't take, bummer, Thanks for the info,
Sent from my Nexus 6P using Tapatalk
Anyone know if it would be possible to implement via a custom kernal?
Sammaul said:
Anyone know if it would be possible to implement via a custom kernal?
Click to expand...
Click to collapse
I'd imagine that the hardware doesn't exist in the phone to make this idea possible.
CNLiberal said:
I'd imagine that the hardware doesn't exist in the phone to make this idea possible.
Click to expand...
Click to collapse
Thought type C was capable by default.
It is shocking to me that a 2015 flagship phone does not support video out via dongle to HDMI cable. My old S3 and HTC M7 do. All my iPhones did and still do. I believe the Samsung S6 does not support video out either.
Sent from my iPhone 8
I thought this was a must have at first. As it turns out. I never really used it on my old phone. Loving the chromecast though.
Sent from my Nexus 6P using Tapatalk
Though I'm sure it won't help, I sent feedback to Google regarding why "Enable Wireless Display" isn't available under the "Cast" display setting. What a crock!
I guess it's Chromecast Dongle or bust. All smartphones today should have wireless display capabilities - smh.
Sammaul said:
Thought type C was capable by default.
Click to expand...
Click to collapse
The spec allows for it. However, it's up to the hardware designer to actually implement it. Google decided not to. Bad idea in my opinion.
CNLiberal said:
The spec allows for it. However, it's up to the hardware designer to actually implement it. Google decided not to. Bad idea in my opinion.
Click to expand...
Click to collapse
From what I understand, it's a USB 3.1 feature. Though the device uses a USB C connector, the data path is still USB 2.0.
corani said:
From what I understand, it's a USB 3.1 feature. Though the device uses a USB C connector, the data path is still USB 2.0.
Click to expand...
Click to collapse
Its actually not a USB 3.1 feature. It's part of the USB Type C spec called "Alternate Mode". DisplayPort would use the same pins that could be used to enable USB 3.0 to push DisplayPort data instead of USB3.0 data. Its a one or the other deal with USB Type C. Either DisplayPort or USB 3.0/3.1. USB 2.0 is always present.
Crap, wish I saw this post before I purchased an USB-C to HDMI cable from newegg
Sent from my Nexus 6P using Tapatalk
---------- Post added at 05:18 AM ---------- Previous post was at 05:16 AM ----------
I tether my phones data, so that I can watch Hulu. I just bought a cable thinking I'd be able to just run Hulu through my phone to my TV w/o tethering, but I guess I wasted my money buying that cable.
Sent from my Nexus 6P using Tapatalk

Categories

Resources