I have the Tudia ultra slim lite case on my LG G3 and really like it a lot. However, it doesn't work very well with my current Pleson tempered glass screen protector because the Tudia's edge's extend over the Pleson's edges, and it can catch on the glass and lift it up. I'm already going to need to replace the Pleson because dirt has gotten under one of its edges.
So, is anyone using a Tudia with a tempered glass screen protector that fits? If so, which one are you using?
I am looking for one as I have a dbrand skin on my phone (they are great ), most screen protectors are mostly for the whole front part.
Buy a normal screen protector and cut it how you want
I've been looking for one as well, for the same reason. No luck so far. Slickwraps usually include such a screen protector with their orders, but I've no idea how it would perform on our "2.5D" screen. It's also probably not worth ordering a set of skins just for the very average PET film.
danieleporu said:
Buy a normal screen protector and cut it how you want
Click to expand...
Click to collapse
The edges won't stick, you'll get a "halo" effect, dust will get in, etc.
You *could* try something from Skinomi, though. I know their wet-apply protectors stick really well on curved glass (I swore by it back in my HTC One X days). You could either try to cut it down to size, if you have such precise tools, or even just stick the whole thing over your skin, it'll probably be fine. Plus you get protection for your nice skin.
I am in the same boat. I'm getting a skin for mine and want to still be able to protect my screen.
Yesterday I received i-croo full screen protector and I think it's the best protection available today. This type of PET must be combined with proper case like Ringke Slim to avoid peeling on edges.
I-Croo fullscreen protector:
http://www.ebay.com/itm/36152666338...49&var=630914327414&ssPageName=STRK:MEBIDX:IT
Ringke Slim:
http://www.ebay.com/itm/26229847133...49&var=561063631103&ssPageName=STRK:MEBIDX:IT
HERE IS VIDEO HOW IT LOOKS:
https://www.youtube.com/watch?v=8dNkMydF-pM
flax said:
Yesterday I received i-croo full screen protector and I think it's the best protection available today. This type of PET must be combined with proper case like Ringke Slim to avoid peeling on edges.
I-Croo fullscreen protector:
http://www.ebay.com/itm/36152666338...49&var=630914327414&ssPageName=STRK:MEBIDX:IT
Ringke Slim:
http://www.ebay.com/itm/26229847133...49&var=561063631103&ssPageName=STRK:MEBIDX:IT
HERE IS VIDEO HOW IT LOOKS:
https://www.youtube.com/watch?v=8dNkMydF-pM
Click to expand...
Click to collapse
We are looking to cover just the screen though. Not the entire front. We have skins that cover everything on the front but the screen.
Put on a full coverage screen protector.
A wet install one would work the best.
If not a wet install, one like the Spigen Curved Crystal is excellent.
Then apply the front skin directly on top of the protector.
I did this for a while and it worked perfectly with the Spigen Curved Crystal.
The skin actually stuck well to the protector, and the corner cutouts of the protector allow the skin to stick to the screen directly and hold the protector down better.
Here is the amazon link for the Spigen protector, only $8.99 for a 2 pack right now.
http://www.amazon.com/Protector-Spi...2930919&sr=8-4&keywords=spigen+curved+crystal
flax said:
Yesterday I received i-croo full screen protector and I think it's the best protection available today. This type of PET must be combined with proper case like Ringke Slim to avoid peeling on edges.
I-Croo fullscreen protector:
http://www.ebay.com/itm/36152666338...49&var=630914327414&ssPageName=STRK:MEBIDX:IT
Ringke Slim:
http://www.ebay.com/itm/26229847133...49&var=561063631103&ssPageName=STRK:MEBIDX:IT
HERE IS VIDEO HOW IT LOOKS:
https://www.youtube.com/watch?v=8dNkMydF-pM
Click to expand...
Click to collapse
could you please post some photos without the case? thanks
Milimbar said:
Put on a full coverage screen protector.
A wet install one would work the best.
If not a wet install, one like the Spigen Curved Crystal is excellent.
Then apply the front skin directly on top of the protector.
I did this for a while and it worked perfectly with the Spigen Curved Crystal.
The skin actually stuck well to the protector, and the corner cutouts of the protector allow the skin to stick to the screen directly and hold the protector down better.
Here is the amazon link for the Spigen protector, only $8.99 for a 2 pack right now.
http://www.amazon.com/Protector-Spi...TF8&qid=1462908151&sr=8-1&keywords=B01CUQ9Z7A
Click to expand...
Click to collapse
I had considered that. Obviously it would stick to a glass protector, but any experience with applying a skin to a wet apply protector? I only ask because I'm not sure I'm sold on using a glass one on the curved screen. Also, thanks for the link!
dragunbayne said:
I had considered that. Obviously it would stick to a glass protector, but any experience with applying a skin to a wet apply protector? I only ask because I'm not sure I'm sold on using a glass one on the curved screen. Also, thanks for the link!
Click to expand...
Click to collapse
The glass protectors for the S7 Edge are ALL horrible, do not use them.
The Spigen Curved Crystal is a curved PET protector, it actually fits the phones really well.
There was some problems with the initial batch of protectors but that has been fixed and now they are perfect.
Milimbar said:
The glass protectors for the S7 Edge are ALL horrible, do not use them.
The Spigen Curved Crystal is a curved PET protector, it actually fits the phones really well.
There was some problems with the initial batch of protectors but that has been fixed and now they are perfect.
Click to expand...
Click to collapse
I wonder if I could stick the skin over one of those. I'm thinking with a hair dryer it might be possible.
dragunbayne said:
I wonder if I could stick the skin over one of those. I'm thinking with a hair dryer it might be possible.
Click to expand...
Click to collapse
Over the Spigen protector?
That is exactly what I was saying to do, it works perfectly.
I have the Metropolis and Plasma UAG cases and I want to find a good screen protector that doesn't come up at the edges.
Not fussed on tempered glass as the cases are good enough for me, I just want a screen protector to stop any little scratches appearing on the screen from use.
I've tried the Spigen liquid protector and its just a little bit too long, fine on the edges but not in length
I had the same prob with 3 different wet apply protectors.
Only thing i got to work was a full cover TP and had to pull the top and bottom of the case over the glass. Worked very well.
Whitestone dome works on my uag plasma and uag monarch.
Is the included clear case tempered glass screen protector friendly, or does it lift it up from corners? Any recommendations for screen protector? And if that included one is no good, also recommendation for clear case is appreciated.
im using the MOFI full screen tempered glass screen protector with the factory case without issue.... just too bad the MOFi looks like a oild slick in the middle of the screen otherwise it would be perfect
I bought a Spigen case which is, as usual, nice and protective.
For the tempered glass, i bought a Force Glass ($$$) which is really nice to touch without fingers trails, but finally it's ****. Like all the S8/S9 (not dome glass) it's only glued with the edges and not very well, so it'll become dirty fast . And if you look at it under a bright sun you don't see anything.
I don't recommend to buy this "way too expansive" Force glass! I regret it! 2$ glass will do a better job.
Am I not right in thinking this phone comes with a screen protector already on it.? Mine looks like it does, obv don't want to try and take it off in case it is one lol... Came with a clear case too
Cheap tempered glass + clear case (Huawei case)
I used the clear case which came with the phone as for tempered glass I used a cheap (£1.99) from eBay.
The tempered glass covers the screen almost perfect. It isn't edge to edge, but it is wide as the screen.
The glass hasn't got a good oleophobic coating, but is better than the plastic one and has adhesive on entire surface. (i would add a photo but I've got no clue how?
Hi all, is there any spigen neo hybrid alternative for Huawei P20 Pro?
Hi, any issues getting the tempered glass on with the Spigen case? Thanks
RubyRP62 said:
I bought a Spigen case which is, as usual, nice and protective.
For the tempered glass, i bought a Force Glass ($$$) which is really nice to touch without fingers trails, but finally it's ****. Like all the S8/S9 (not dome glass) it's only glued with the edges and not very well, so it'll become dirty fast . And if you look at it under a bright sun you don't see anything.
I don't recommend to buy this "way too expansive" Force glass! I regret it! 2$ glass will do a better job.
Click to expand...
Click to collapse
I've applied Zabra tempered glass (Amazon purchase) without any bubbles but after applying the Huawei clear case, edges came out, disabling my screen touch features.
Highly not recommended to buy this "Zabra full glue 9H tempered glass screen protector"
On of the best tempered glass for P20 PRO is Nillkin the hall series..
I have try Nillkin amazing H (3mm cover real screen leave 2mm at the edges case friendly) Nillkin amazing H+ (2,6mm cover real screen leave 2mm at the edges case friendly best clarity) & Nillkin CP-MAX 3D (3mm Full Cover edge to edge full adhesive full glue)
They are all fit perfect with excellent fit & clarity
No bubbles, no rainbow effect, no halo effect, no dot matrix, no fingerprints
I prefer CP-MAX 3D for full protection with original clear silicone case or ipaky case
I have bought the Spigen tempered glass screen protector and Spigen Ultra Hybrid Crystal Clear case recently
those side adhesive screen protectors suck!!!
whitestone is loca based and because of that full adhesive and it will be released in a week or so on amazon. great feel to the proctector, just like the original screen, no 3d dot matrix, no problems with touch sensitivity, almost no fingerprints and if they are gone with one wipe and so on.
i will get it asap since it's doing fantastic on my note 8 for over 9 months now.
i got the spigen rugged armour and i love it. Feels great in your hands. its like velvety soft. Using this with the stock screen protector, which i feel is sufficient for me
i just wish spigen released the ultra hybrid clear case with a built in kickstand for this phone.
I've never used a protector on my previous phones but opted for the Spigen and think it's great. Had it in five days now, doesn't get too messy from fingerprints and only issue with haloing was my fault, had to take it off a couple times as I want happy with how I put it on. Used it in direct sunlight and was amazed, after one Samsung and two Sony's I can actually read my phone outside"
TheRedIndian said:
I have bought the Spigen tempered glass screen protector and Spigen Ultra Hybrid Crystal Clear case recently
Click to expand...
Click to collapse
I bought the Spigen Slim Armor case ( £15 ) and Spigen Tempered Glass ( about £8 ) and am very happy with both. I moved from Otterbox a few years ago when I couldn't see a decent case that I liked. I've had 4 Spigen cases for various phones so far and have never been let down to date
ESR products for me fits perfectly
It looks like there are not much good options for this phone (compared to my last one), I have ordered the spigen ultra hybrid (transparent) & tempered glass combo.
I'll post photos with the result
Do some regions not get an included case? I just bought this device yesterday in Canada and there was no case with it.
Spigen crystal clear case and Nillkin Amazing H+ for tempered screen. Trust me, this glass protector is the only one I have found to not retain fingerprints and to stick perfectly and evenly on the 20 pro. If you correctly align it with the edges of the screen, there will be no air pocket whatsoever. It's impressive.
Anybody know the brand of this screen protector and where I can get one? I'm most interested because, well, it's full screen and not just adhesive around the edge. But also the guy mentioned it works with the case I'm going to be using ( UAG ) .
https://www.youtube.com/watch?v=FymSOb_3vOs
I'm thinking of getting this combo and I'm wondering how the screen protector fits with the case. Any issues with the edge of the case pushing up the edges of the screen protector? I'm guessing the "Case Fit" would be the best option here? Anyone have any experience with the difference between the regular and Case Fit? Anything else I should know?
I've had screen protectors like the Gadget Shields before (soft, wet apply film I believe) that is somewhat springy to the touch. Think I'd like it. I'll decide between that and any good tempered glass ones I can find.
Case fit worked great with my supcase unicorn beetle. Covers similar to the stock protector.
full screen i think would have issues.
Sent from my ONEPLUS A6013 using Tapatalk