hi to all, a friend give me his phone after an upgrade with kies. Now it stuck on start up logo.
I try to enter in download mode but odin say me fail message after start button.
I try to enter in recovery mode but you can see in image some error...
I try to upgrade phone with kies in download mode but after put model and s/n program say mt that i don't have admin permission
I try to connect phone with kies but phone phone not recognize mtp usb driver
Phone has custom binary download:yes (2 counts)
How can i solve?
[/ATTACH][/ATTACH]
none help me, please???:crying::crying:
mafo82 said:
none help me, please???:crying::crying:
Click to expand...
Click to collapse
Try to flash the latest firmware for your I9300 and look if it do the same error.
Sent from my GT-I9300 using XDA Free mobile app
Same error, odin not work
Sent from my HTC One X+ using XDA Free mobile app
Try but odin not work
Sent from my HTC One X+ using XDA Free mobile app
mafo82 said:
Same error, odin not work
Sent from my HTC One X+ using XDA Free mobile app
Click to expand...
Click to collapse
What is the error in Odin ?
Sent from my GT-I9300 using XDA Free mobile app
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNJ2_I9300PHNGNJ1_I9300XXUGNA8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 1)
mafo82 said:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNJ2_I9300PHNGNJ1_I9300XXUGNA8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try the rescue firmware here >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << also try odin 1.85 >> http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539 << The rescue firmware containes a pit file which is in version 4.1.2 in the thread but can be used on both roms follow instructions exactly
and this after
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXAGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Try downgrading the boot loader to version BLFB using Odin before flashing the full firmware.
Also, ensure kies is not running while Odin is.
how?what i search on forum?sorry for my english...
i found this http://forum.xda-developers.com/gal.../util-sboot-checker-simple-downgrade-t2081748 but link to download hboot not work
anyone help me please?
mafo82 said:
anyone help me please?
Click to expand...
Click to collapse
I can't help you more sorry,
For hboot try to research on google ?
Sent from my GT-I9300 using XDA Free mobile app
Related
I own Galaxy s2 white actually i gave to my little brother and the fone is in a mess
fone is running when i am turning it on it is saying firmware upgrade encountered an issue please select recovry mode in kies and try again
I have searched in this forum already but didnt found a working way
i already tried flashing stock firmware with odin but no luck in it
first i downloaded gingerbread firmware belonging to region Pakistan PK
when i tried on odin operation stucks at cache.img
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100JPKJ2_I9100OJPKJ1_I9100XXKI4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
I then tried with the ICS firmware for Pakistan but no luck and it stucks at hidden.img
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100JPLPH_I9100OJPLPF_I9100XXLQ6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> param.lfs
<ID:0/008> NAND Write Start!!
<ID:0/008> hidden.img
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
I have already killed background tasks like kies air and kies itself
other things i get in recovery mood are
ODIN MODE
PRODUCT NAME GT-I9100
CUSTON BINARY DOWNLOAD : YES (28 COUNTS )
CURRENT BINARY : CUSTOM
I have already tried re installing odin 1.85
i have original USB cable provided by samsung
I dont know what was the previous version on it
Helppppppppp
loveshakeh said:
I own Galaxy s2 white actually i gave to my little brother and the fone is in a mess
fone is running when i am turning it on it is saying firmware upgrade encountered an issue please select recovry mode in kies and try again
I have searched in this forum already but didnt found a working way
i already tried flashing stock firmware with odin but no luck in it
first i downloaded gingerbread firmware belonging to region Pakistan PK
when i tried on odin operation stucks at cache.img
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100JPKJ2_I9100OJPKJ1_I9100XXKI4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
I then tried with the ICS firmware for Pakistan but no luck and it stucks at hidden.img
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100JPLPH_I9100OJPLPF_I9100XXLQ6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> param.lfs
<ID:0/008> NAND Write Start!!
<ID:0/008> hidden.img
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
I have already killed background tasks like kies air and kies itself
other things i get in recovery mood are
ODIN MODE
PRODUCT NAME GT-I9100
CUSTON BINARY DOWNLOAD : YES (28 COUNTS )
CURRENT BINARY : CUSTOM
I have already tried re installing odin 1.85
i have original USB cable provided by samsung
I dont know what was the previous version on it
Helppppppppp
Click to expand...
Click to collapse
Try with odin 3.07 and after flash enter recovery mode and do a factory reset if odinf finishes and don´t tick nothing in odin.
testadeferro said:
Try with odin 3.07 and after flash enter recovery mode and do a factory reset if odinf finishes and don´t tick nothing in odin.
Click to expand...
Click to collapse
it gives this error in both roms :/
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> I9100JPKJ2_I9100OJPKJ1_I9100XXKI4_HOME.tar.md5 is invalid.
<OSM> End...
testadeferro said:
Try with odin 3.07 and after flash enter recovery mode and do a factory reset if odinf finishes and don´t tick nothing in odin.
Click to expand...
Click to collapse
i again tried it gives cache error again
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> I9100JPKJ2_I9100OJPKJ1_I9100XXKI4_HOME.tar.md5 is invalid.
<OSM> End...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> I9100JPLPH_I9100OJPLPF_I9100XXLQ6_HOME.tar.md5 is invalid.
<OSM> End...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100JPKJ2_I9100OJPKJ1_I9100XXKI4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
Your phone boots?
testadeferro said:
Your phone boots?
Click to expand...
Click to collapse
when i press power button on it say firmware encountered an error bla bla stuff
when i press power + volume up + menu button nothing happens
when i press power + volume down+ menu button odin recovery mode appears with andriod little green robot downloading do not turn off target
above that its written product name : gt i9100 , custom binary download 28 counts and current binary = custom
Sent you a PM
---------- Post added at 08:11 PM ---------- Previous post was at 07:54 PM ----------
dis you try this?
http://forum.xda-developers.com/showthread.php?t=1457458
testadeferro said:
Sent you a PM
---------- Post added at 08:11 PM ---------- Previous post was at 07:54 PM ----------
dis you try this?
http://forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
i followed the steps from the thread link u given didnt worked but the custom binary changes from custom to samsung
i was trying to install jellyblast in my phone. the rom got installed. but when i tried restarting the phone, it got ricked.
i am trying to use odin but it comes as
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLD3_S5830iODDLD2_RST_S5830iDDLD1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i dont know what to do. please help
First of all Wrong Section.I understand you are new,but post in the appropriate section.
Try using Odin v3.07 or refer this guide http://forum.xda-developers.com/showthread.php?t=1840645
Sent from my GT-S5830i using xda app-developers app
Hi everyone,
So i'm new to firmwares and stuff.
So my phone recently stuffed up by for whatever reason restarting itself and freezing on the 'samsung gt-i9300t' screen.
So i went on to download mode and tried using the firmware provided by sammobile and used it with Odin but it didnt work. here is what the message says
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300TDUELL2_I9300TTELELL2_I9300TDUELL2_HOME.tar.m d5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> tz.img
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Some notes-
*recovery mode does not work, it just restarts the phone
*the phone is from the telstra company in australia
*i havent installed any roms before so it's been running on android
spaghettisauce said:
Hi everyone,
So i'm new to firmwares and stuff.
So my phone recently stuffed up by for whatever reason restarting itself and freezing on the 'samsung gt-i9300t' screen.
So i went on to download mode and tried using the firmware provided by sammobile and used it with Odin but it didnt work. here is what the message says
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300TDUELL2_I9300TTELELL2_I9300TDUELL2_HOME.tar.m d5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> tz.img
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Some notes-
*recovery mode does not work, it just restarts the phone
*the phone is from the telstra company in australia
*i havent installed any roms before so it's been running on android
Click to expand...
Click to collapse
tried flashing it again and it said
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300TDUELL2_I9300TTELELL2_I9300TDUELL2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
spaghettisauce said:
tried flashing it again and it said
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300TDUELL2_I9300TTELELL2_I9300TDUELL2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
does usb debugging is enabled check that
then use a different odin
sangalaxy said:
does usb debugging is enabled check that
then use a different odin
Click to expand...
Click to collapse
um i downloaded the drivers for my phone but im not sure how to check if debugging is on
should i use an older version of odin then?
sangalaxy said:
does usb debugging is enabled check that
then use a different odin
Click to expand...
Click to collapse
i tried what you said and this message shows up
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300TDUELL2_I9300TTELELL2_I9300TDUELL2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> tz.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
spaghettisauce said:
i tried what you said and this message shows up
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300TDUELL2_I9300TTELELL2_I9300TDUELL2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> tz.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Click to expand...
Click to collapse
debugging is on settings-applications-development check that
and try an older version of odin1.85 will be better
try and post
sangalaxy said:
debugging is on settings-applications-development check that
and try an older version of odin1.85 will be better
try and post
Click to expand...
Click to collapse
i cant get to the debug option my phone is frozen in boot screen. odin 1.85 shows-
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300TDUELL2_I9300TTELELL2_I9300TDUELL2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> tz.img
<ID:0/007> NAND Write Start!!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
spaghettisauce said:
i cant get to the debug option my phone is frozen in boot screen. odin 1.85 shows-
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300TDUELL2_I9300TTELELL2_I9300TDUELL2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> tz.img
<ID:0/007> NAND Write Start!!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
Click to expand...
Click to collapse
do you have kies running
If yes disable that
and be sure that you have the correct usb drivers or kies installed
and you can also try without battery
take out the battery and connect to pc then go into download mode
sangalaxy said:
do you have kies running
If yes disable that
and be sure that you have the correct usb drivers or kies installed
and you can also try without battery
take out the battery and connect to pc then go into download mode
Click to expand...
Click to collapse
i dont have kies and ive got the correct drivers
spaghettisauce said:
i dont have kies and ive got the correct drivers
Click to expand...
Click to collapse
the better is uninstall drivers and install kies and try connecting if you computer recognizes just fine the go with as above said without battery
sangalaxy said:
the better is uninstall drivers and install kies and try connecting if you computer recognizes just fine the go with as above said without battery
Click to expand...
Click to collapse
my phone doesnt turn on without battery
spaghettisauce said:
my phone doesnt turn on without battery
Click to expand...
Click to collapse
go into download mode after connecting to pc it will work without battery
I've been using OmniROM and TWRP for quite some time now.
I put the phone on charge and a few minutes later it was stuck on Samsung initial Screen with the usual red triangle. (Showing SAMSUNG Galaxy SIII GT-I9300)
I removed the charger and battery and restarted, it was still stuck on Samsung Boot Screen.
Any ideas how to recover the phone?
I have tried going through some of the other forum threads but most of them can't go to download mode. I can go into TWRP and download mode both. I tried recovering the phone using Kies "Firmware Initialization" but it generates "your phone cannot be upgraded to the latest version" and stops.
falconflyer82 said:
I've been using OmniROM and TWRP for quite some time now.
I put the phone on charge and a few minutes later it was stuck on Samsung initial Screen with the usual red triangle. (Showing SAMSUNG Galaxy SIII GT-I9300)
I removed the charger and battery and restarted, it was still stuck on Samsung Boot Screen.
Any ideas how to recover the phone?
I have tried going through some of the other forum threads but most of them can't go to download mode. I can go into TWRP and download mode both. I tried recovering the phone using Kies "Firmware Initialization" but it generates "your phone cannot be upgraded to the latest version" and stops.
Click to expand...
Click to collapse
Download stock rom from Sammobile and flash in Odin..
tallman43 said:
Download stock rom from Sammobile and flash in Odin..
Click to expand...
Click to collapse
Downloaded latest stock rom ML4 and this is what I get in Odin 3.09:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XWUGML4_I9300ODDGML4_I9300DDUGMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/038> Added!!
<ID:0/038> Odin v.3 engine (ID:38)..
<ID:0/038> File analysis..
<ID:0/038> SetupConnection..
<ID:0/038> Initialzation..
<ID:0/038> Get PIT for mapping..
<ID:0/038> Firmware update start..
<ID:0/038> SingleDownload.
<ID:0/038> sboot.bin
<ID:0/038> NAND Write Start!!
<ID:0/038> FAIL!
<ID:0/038>
<ID:0/038> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
falconflyer82 said:
Downloaded latest stock rom ML4 and this is what I get in Odin 3.09:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XWUGML4_I9300ODDGML4_I9300DDUGMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/038> Added!!
<ID:0/038> Odin v.3 engine (ID:38)..
<ID:0/038> File analysis..
<ID:0/038> SetupConnection..
<ID:0/038> Initialzation..
<ID:0/038> Get PIT for mapping..
<ID:0/038> Firmware update start..
<ID:0/038> SingleDownload.
<ID:0/038> sboot.bin
<ID:0/038> NAND Write Start!!
<ID:0/038> FAIL!
<ID:0/038>
<ID:0/038> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Nand write fail usually means dead emmc chip. You can try rescue firmware here >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << but I think you need to send it fto service for repair.
tallman43 said:
Nand write fail usually means dead emmc chip. You can try rescue firmware here >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << but I think you need to send it fto service for repair.
Click to expand...
Click to collapse
I tried the rescue firmware, similar result:
Code:
<ID:0/014> Odin v.3 engine (ID:14)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Set PIT file..
<ID:0/014> DO NOT TURN OFF TARGET!!
<ID:0/014> FAIL!
<ID:0/014>
<ID:0/014> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I finally took to a repair shop, they say it is my fault since I rooted it (they can see the red exclamation mark), and will charge extra for "software change".
Any idea how to reset the counter in download mode, revert to stock recovery and remove the red exclamation mark in bootloader?
P. S. I read somewhere in case of dead emmc I shouldn't be able to see the device version in download mode. But I can..
bricked device i9300..
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CheckROM_V4_LG8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
it gets stuck for hours without any response ... can any one help please
dupri11 said:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CheckROM_V4_LG8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
it gets stuck for hours without any response ... can any one help please
Click to expand...
Click to collapse
Did you try Odin 3.09? I too get the same result as you with Odin 3.07. With 3.09 I get the write fail error.
falconflyer82 said:
Did you try Odin 3.09? I too get the same result as you with Odin 3.07. With 3.09 I get the write fail error.
Click to expand...
Click to collapse
I used the 3.09 still same problem am stuked up really
If the rescue firmware and pit didn't flash then your emmc chip is damaged, either new motherboard or phone.
Sent from my GT-I9300 using Tapatalk
falconflyer82 said:
I finally took to a repair shop, they say it is my fault since I rooted it (they can see the red exclamation mark), and will charge extra for "software change".
Any idea how to reset the counter in download mode, revert to stock recovery and remove the red exclamation mark in bootloader?
Click to expand...
Click to collapse
There must be a way to reset the download count by installing stock recovery. Maybe @Chainfire can help here.
Sent from my XT1033 using Tapatalk
dupri11 said:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CheckROM_V4_LG8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
it gets stuck for hours without any response ... can any one help please
Click to expand...
Click to collapse
what @boomboomer said is what you should consider.
If you keep on insisting, you will just damage the phone more ( i am talking from experience ) .
change motherboard or in some places, people can replace the emmc Chip for you.
Salam
hi guys,
my phone is soft-bricked and it freezes samsung logo screen on the startup.
How can I enable usb debugging mode on this situation ? Do you have any solution ??
My phone is: Samsung Galaxy S3 GT-I9300 International..
husamba said:
hi guys,
my phone is soft-bricked and it freezes samsung logo screen on the startup.
How can I enable usb debugging mode on this situation ? Do you have any solution ??
My phone is: Samsung Galaxy S3 GT-I9300 International..
Click to expand...
Click to collapse
There is no way how to enable USB debugging mode if is device soft bricked.. Download official FW ,then go to download/bootloader mode and flash it via Odin.
DejVidKo said:
There is no way how to enable USB debugging mode if is device soft bricked.. Download official FW ,then go to download/bootloader mode and flash it via Odin.
Click to expand...
Click to collapse
Hi DejVidKo,
I just get official FW from sammobile, I went to download mode and I am getting an error like below on ODIN. Do you have any guess about what I am doing wrong.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNB6_I9300OJVGNB3_I9300XXUGNA8_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
husamba said:
Hi DejVidKo,
I just get official FW from sammobile, I went to download mode and I am getting an error like below on ODIN. Do you have any guess about what I am doing wrong.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNB6_I9300OJVGNB3_I9300XXUGNA8_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
If you have another version of Odin,try Odin v3.04
DejVidKo said:
If you have another version of Odin,try Odin v3.04
Click to expand...
Click to collapse
No wayyy. I tried it too. And I am getting same error. There are more than one rom in sammobile. May I download the wrong rom from sammobile.. :S
<ID:0/006> Added!!
<ID:0/006> Removed!!
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNB6_I9300OJVGNB3_I9300XXUGNA8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)