Does anyone know what this little box means? In Lockscreen always visible and sometimes in normal use. How can i remove this "ratt" box?
Here is a picture
..
some software is generating it. Try making backup and performing factory reset if it annoys you.
Related
So there's a (what I thought was a dead spot) sensitive spot near the top of my screen. It's about an inch tall and spans the whole screen wide. If you press normal to hard it'll do a instant single click. But I found out if you touch it really lightly it'll function like normal.
Now the weird part is it stays w/ the rotation. If you turn it upside down or sideways the bar always effects the same icons and widgets in its path so I don't believe its a hardware problem.
Anyone else have this problem?
i'm assuming you're using a 101 as this seems to be a normal defect of the device. there is a fix where you have to dig inside your archos to get rid of the flex or you can just make a habit of lightly touching it. it's a pain trying to drag widgets on the screen b/c of this.
you can try to recalibrate the screen to see if it may help any.
Yea on a 101 and the recalibrate doesn't help. What is this fix your talking about?
Sent from my htc EVO
The fix that madsquabbles is referring to can be found here:
forum.archosfans.com/viewtopic.php?f=74&t=41717
(You will have to copy and paste the link. I don't have enough posts to enter a URL. )
I have also read that it may go away with time and multiple recalibrations, or that it may be caused by a "rogue" application and/or widget that has issues with the device.
http://forum.archosfans.com/viewtopic.php?f=74&t=41717
Try that one.
In stock image "Gallery", when zooming a pic, screen goes black .
After the ICS update, the image gallery also suffered a problem. Sometimes while viewing a pic and you double tap to zoom in, suddenly the screen goes black...no pic. Start to zoom back out and the image comes back..zoom in again..image black screen again. This happens with random pics and wont fix itself unless you Force Stop the app in Control panel. It wont always be the same pics..anyone else get this? Its not important, I just wondered if this is just something on my phone..
After updating to the OTA, everyone has problems until they do a factory reset. It clears out all the GB crap that messes it up.
Backup your data and then power off your phone. Take out the battery and put it back in. Then press power and volume down until you see he white screen. Use the volume keys to highlight and power to select "factory reset".
Forgot I wrote this, sorry. Already did a reset long ago as per suggestions by others for other problems since the update. So the problem never fixed itself. Its some crap with ICS. Its annoying because now I keep getting this problem.
Has anyone else experienced this before?
Ok..obviously nobody knows about this. I'm going to take a short video and i'll have it up within a couple days. This photo browser is pissing me off! Is there a better or just as good (FREE) app out there in the market or on XDA? Something that doesnt have this bullsh** problem in it? Thanks ahead of time for any replies.
This phone has never been modified, no custom ROMS, never rooted, using the latest OS from AT&T ...
And today, for whatever reason, when making originating a phone call, and once I've hit "dial" ... the phone screen goes completely black except for the status bar at the top (the one you can swipe down). I'm saying that whereas usually, after hitting "dial" and as the phone dials, you can actually see a screen full of information (hang up botton, number/name of who your dialing, etc.) ... in this case and now, there is just a black screen.
Though there is a black screen (other than the status bar at top), I can still hear the phone ring and even have a conversation should somebody answer. But when the call is over (the person on the other end has to end the connection because I have no screen interface to do such), the screen remains blank (other than the status bar at top) and none of the bottom, permanent keys are operative either ("home" / "back" / settings / etc.). To get back to the home screen, I have to pop the battery and re insert it and re start the phone. But even then, it's acting weird: when booting, at the "Reimagine Possilbe" screen (I think that's what it says) it hangs there for about 45 seconds (usually only about 5 when functioning correctly) and will eventually end up at the home screen.
But if I originate a call, the cycle repeats.
I've completely reset the phone to factory defaults at least three times, formatted the USB storage and the whole nine yards but it remains glitched as described above.
...
So... has anyone seen/heard of this?
I'm thinking of just warrantying the phone as it's only about 5 months and I figure AT&T should have no issue as it's such a replicable problem and it certainly doesn't seem to be software related as it's completely stock and multiple factory resets have not worked but wanted to put a line out here first to see if anyone else has experienced this.
Thanks in advance for any information.
Best,
Joel.
I think the network is fugazi right now, as I had issues with the phone, and read about another user having same troubles. I'd give it a little time.
rangercaptain said:
I think the network is fugazi right now, as I had issues with the phone, and read about another user having same troubles. I'd give it a little time.
Click to expand...
Click to collapse
I sure hope so. Even though I've reset the phone (which sucks) ... I'd prefer that over having to go to the store and all...
Odd that a network problem could cause such, though ....
Thanks for the word ...
Best.
.joel
Just a llittle update ...
I changed the "Proximity Sensor" to OFF and now the normal iin-call screen appears but it never goes away, which can be problematic.
In general, I've always had the proximity sensor set to ON as this allows the in-call screen to blank after a few seconds (complete blank with no status bar at top) and then reappear when I remove the phone from my ear.
But when I re enable the proximity sensor, now ... the screen blanks immediately (excepting the status bar at the top) and never comes back ... even after my call recipient ends the call ...
I'm just gonna warranty at at the local service center; at this point (two days now with all my friends AT&T phones working fine) I'm pretty sure something is glitched with the internal sensor that manages the proximity settings ...
Thank God for warranty.
Hello,
Unfortunatel my device seems to have some kind of malfunction.
The Issue is that the devices suddenly locks andd just shows the clock.
I can`t unlock it. After a while it might show the normal screen and I can unlock it.
Then the clock comes back and I can`t do anything.
I reinstalled with wipe all everthing however after a while it will come back.
https://www.pic-upload.de/view-33958545/DSC03631.jpg.html
Any help is appreciated
Check for smart cover option in smart assistance
Turn it off. The pic you posted comes when you use flip cover (when closed )
Have u applied any sceen protector covering upper right (nr front cam) side of screen it may cause this
There a proximity sensor and one other idnt know name but it should be uncovered when using phone.
Or the sensor is misbehaving.
vespin said:
Hello,
Unfortunatel my device seems to have some kind of malfunction.
The Issue is that the devices suddenly locks andd just shows the clock.
I can`t unlock it. After a while it might show the normal screen and I can unlock it.
Then the clock comes back and I can`t do anything.
I reinstalled with wipe all everthing however after a while it will come back.
https://www.pic-upload.de/view-33958545/DSC03631.jpg.html
Any help is appreciated
Click to expand...
Click to collapse
That may be smart cover problem
Hi all,
First of all I KNOW how to use google and I checked different messages about spots on android phones. My case is different: I see not some abstract spot on phone display, but light sky blue circle and inside it 60. The whole thing is barely visible. At fist I even thought it could be some information displayed by some app, or some bug caused by me (I am game developer), but after factory reset damn thing is still there. Any advice?