Hello all, I have the xv6800, dcd rom 3.3.4 and activesync and internet sharing setup on Windows just fine. However, I have recently gotten a MAC, and I have not been able to get the internet sharing to work via BT or USB. I can understand BT cause I was never able to get it set up on windows either. I don't mind the USB connection, it's alwasy been more stable and a snap to set up with the ROM. However I can't get it working on the MAC. Is there a driver or app that needs to be installed on the mac side? The only think I remember doing on the WIN side is installing the modem driver.
On Mac, I have installed Missing Sync installed and I have been able to attach and sync my winmo phone without issue, so I know I have connection. but I cannot get the internet sharing to work. I checked out the verizon site and they state that they do not make a modem driver for the mac os.
I should also mention that I have winXP set up on the mac thru VMware, but I have been unsuccessful getting this to work the way my original windows laptop is setup. I dont want to set it up that way anyway if I can avoid it.
I am curious if anyone has this working via USB?? I apologize if this has been covered elsewhere. I couldn't find anything related and certainly not specific to this ROM.
I did find this, http://www.keithtastic.com/post/3997...-to-sprint-htc, but it states to buy an app called USB Modem program from www.mobile-stream.com. but wouldnt the ISC app on the dcd rom provid the same functionality?
Thanks for any/all help
i use BT in OSX... system prefs, bluetooth, setup a connection to the phone(+ button)... hit the bluetooth icon on the menubar, select the phone -> connect to network, thats all i have to do.
bmorrisj said:
i use BT in OSX... system prefs, bluetooth, setup a connection to the phone(+ button)... hit the bluetooth icon on the menubar, select the phone -> connect to network, thats all i have to do.
Click to expand...
Click to collapse
then just use internet sharing form the phone as normal?
no offense but that didnt help at all. I can connect my phone via BT themac sees it, but all I can do is browse device. I need to set up a connection with my phone to the mac and get online via my phone. I dont careif its bluetooth or not. I have the new macbook btw, if it matters
goon55: Like you, I always used a VM workaround to tether back when I had a Mac. I haven't tried this, but I've heard Syncmate allows Internet Sharing on Mac systems. Good luck!
I have no issues connecting my macbook for my 6800.
After you set it up like the other poster told you to, you should have a phone icon next to the bluetooth icon at the top right of the screen. click the phone icon then "connect bluetooth".
goon55 said:
no offense but that didnt help at all. I can connect my phone via BT themac sees it, but all I can do is browse device. I need to set up a connection with my phone to the mac and get online via my phone. I dont careif its bluetooth or not. I have the new macbook btw, if it matters
Click to expand...
Click to collapse
also when setting up the BT relationship, make sure you select the network services (i believe, there are one or two services you can check)...on the phone make sure you start BT and internet sharing (with BT selected) and when you go to the BT menu on the mac, your phone name should be under "devices", expand your phone name and select connect to network.
just trying to clarify a bit.
i had it
i had bt working for a bit and then was disconnected abruptly.
after deleting the profiles of the pairings on both the titan and the mac, it still wont share the connection although the phone will be connected in bt system prefrence pane, (where you select devices).
when it worked, i would select the phone in the device select, and underneath clicking on the gear to a menu option to 'connect to network'
it worked that wayfor 3 mins.
also, when i configure the device, if i set the phone to internet share while the mac is discovering the services, i get two options to select instead of just one:
access the internet
use device as network port.
edit: got it, apple talk active
best software you can use is http://www.wmwifirouter.com/ it works over BT or wifi and uses your phone's regular data access address which means you don't get tethering charges. NOTE I use the free version, and I have tried the tiral and although it does work, my mogul does not seem to like it and has little quirks after I install it (wifi turns on when I reset even if the switch is off, I don't why but its there).
Hi everyone, I've been trying to use my Windows Mobile phone as a modem for the Macbook, but so far I only see people being able to connect via BT. Problem with that for me is that BT drains both my laptop and phone battery quicker, so I'm trying to find a solution to connect via USB instead. Has anyone been able to surf on their Mac using their Windows Mobile phone as a modem via USB cable?
What you want is Mobile Stream USB Modem for Windows. Windows here being Windows Mobile, it works with my Mac.
Once you set it up, your phone is seen as a USB Modem and you dial from the Mac to this port. There is a free trial, take time to test it, read the forums, I had some initial issues to get it work right, but now it is good, I ended up purchasing it.
Tried BT sharing too, but too instable and drops. Tried the WiFi sharing, but eats battery...
Only downside: as you dial the data modem, it will fail if it is already in use (background email checking on your phone...). I have to disconnect the data connection on the phone to be able to dial from the Mac, otherwise it reports Port Busy.
Thanks for the recommendation, will try it out. Any other solutions in the meantime to connect and share the Internet connection from my Windows Mobile phone to Mac via USB?
I had the same problem, and tried everything recommended in the thread - no dice. I ended up just installing WMWifiRouter and that works like a champ.
http://networkjew.com/2009/03/30/tether-windows-mobile-phone-mac/
This is for cingular, but I'm sure this can be attempted no matter what the provider.
I've been looking for a solution as well, and have yet to find one for USB Internet Sharing on a Mac. I currently just use Bluetooth with an external charger on the phone and laptop since it'll eat the battery of both quickly.
hi,
can i connect my atrix to linux? Specifically ubuntu.
which program i can use for this?
am i need a SD card?!
thanks
You plug it into the USB port.
be sure to thank me
sent from my amazing jazz hands
dose not work
no Reaction on computer.
Make sure you set USB mode to something other than 'none' in the status tray... You won't need an SD card, but Media Sync/Motorola mode might not work since they most likely were made for Windows. Although Windows Media Sync (or w/e its called) might make it an MTP device (Or is that other one?). Haven't Used Ubuntu in a long time since it started to suck.
Instead of driving myself crazy trying to get this to work then finding out its not possible im going to see if anyone has any input on this.
I use my bluetooth headset with my X2 just fine but I want to pair the phone with my computer to use the app BlueNMEA to send gps data over bluetooth to use in Streets and Trips on my computer.
The problem is that after my computer tries to pair with my phone it tries to install drivers and then fails. I have the USB drivers installed but obviously its looking for different drivers. I just have no idea what drivers it needs or where to find them.
So any help would be much appreciated, even if its just letting me know that someone has successfully paired their phone with their computer... then Ill at least know im not working toward a dead end. Thanks!
I'll look more into it, but does BlueNMEA provide Bluetooth drivers on there support page?
Also, Do you provide the pins and such for pairing the device to the computer? Have you had a successful BT connection with the computer in the past?
Also, next time post in Q&A's please.
This is the first time I have tried pairing the X2 to the PC with bluetooth so no I have never had a successful connection before. This is something I used to do with my old windows mobile phone and recently have the need for it again.
Yes it does ask for the pin and once entered both devices attempt to connect but when windows then tries to load the drivers which would allow the devices to communicate it just fails.
BlueNMEA as far as i know doesn't need any special driver once the two devices are communicating.
Sounds like something is needed from the site, what ROM are you using?
Tapin' the Talk on the xSquared
I am not sure what to call this so it is difficult to search for it... what I am wondering is... can I connect my SG2 to PC via usb and use the wired internet connection that way? (For example, at someone's house who doesn't have wireless - so I am not using cell data all the time)
It's generally called reverse tethering. I found a page here on XDA that may help you do what you're wanting to do - [Tool][Windows Only][Root] Android Reverse Tethering
Here's a good example of how to set it up for XP, MAC and Vista. I assume this should apply to Windows 7 as well.
http://cnettv.cnet.com/make-your-laptop-hot-spot/9742-1_53-28619.html
Thanks, guys. I guess I was hoping there was just some setting on the PC and another on the phone and then connect and go. I don't want to install things on on a computer I am just "visiting" for a day or two. I appreciate the quick answers though.
If the PC has a wireless card, you can use that to host an access point for your phone to connect to via wifi.
I don't have time for wireless and my only wifi is my hotspot from my phone, so I suppose if there is a wifi phone to pc app that can use the phone as the wifi that could work, but I'd prefer the fastest usb method. I had it a little while back with the cheetah sync app but they stopped supporting it and I didn't get to install it on my new phone, so...
Anyone know what app if any can do this?? It's so far been proving not easy to find if at all. I guess no one is syncing via usb. Any ideas?
Not sure if synchronize ultimate can sync via usb but you could try.
Tasker should be able to do that as well, although this might be tricky to 'build'.