hello guyz i need to change imei and imsi number in an emulator with usb support option.. after alot of search i got Genymotion emulator which is pretty good.. support usb also.. but when it comes to imei change it only support imei change in paid version... but i used xposed & xprivacy to change imei also.. now it comes to last and final thing IMSI number.. i know there is also option of changing imsi number in xprivacy and i tried that but its showing - in imsi number in my application while i used android device id application to check.. imei got changed but in Subscriber Id (imsi) its showing NOT FOUND ( DEVICE DO NOT HAVE GSM OR CDMA RADIO OR IN AIRPLANE MODE)
while emulator is not in AIRPLANE MODE... so kindly guide me how can i enable IMSI option on genymotion.. i tried contacting genymotion support but no reply from there side yet in 2 days...
or if you know any other emulator which support IMEI/IMSI + USB support let me knw..
I also tried android emulator which comes with sdk tools.. i was able to change imei/imsi by using hex editor but there is no USB SUPPORT in that...
also tried Android X86 install in VmBOX.. but no imei/imsi found in that
Related
I finally got my HTC programmed and working. Everything with it is great, except now it cannot connect to the internet.
I get two kinds of error messages- initially it kept telling me that my username or password was wrong..... I couldnt find a place to enter either of those [not that i knew what they should be anyway], and I've never had this problem on my other HTC's. Now its telling me that it cannot connect for an unknown reason and that i should change the settings if needed or reset the device according to manufacturer's documentation....
What should I do?
I upgraded to wm6.1 last night, and im running USCC as my carrier.
It was suggested to me that i enter ##778 mode and change some settings there, but i do not know the MSL for my area.
Any idea where to find that?
Thanks.
Not sure if these will work but found them when I was looking for my MSL.
Use this method. I don't know who found it, but credit goes to them.
Change the following registry entries in:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ATDbgLog
Enable: 1
LogMode: 1
* Wait a about 10 minutes (more time will not hurt), and soft-reset.
* Check to see that the file \Atlog\ATDbg0.txt has been created.
* Return the values back to what they were (most likely 0) waiting the same amount of time as above.
* Look in the ATDbg0.txt file and you should see a log of commands sent to the CDMA radio and there should be something like this somewhere in the file:
~~~~~~~~~~~SNIP~~~~~~~~~~~~
00:00:00 Tx:AT+HTC_RMSL=0\r
00:00:00 Rx:+HTC_RMSL: (###THIS WILL BE THE MSL###)\r\n0\r
00:00:00 Tx:AT+HTC_ROTKSL=0\r
00:00:00 Rx:+HTC_ROTKSL: 123456\r\n0\r
~~~~~~~~~~~SNIP~~~~~~~~~~~~
The numbers next to the Rx: +HTC_RMSL line should be your MSL
OR
Do a search for BAFMSL. It's a universal SPC code finder tool.
It requires .net 3.5, and tends to fail randomly, but so far has worked on 8 of 10 phones I have tried it on.
BTC
http://www.rimweb.in/forums/index.php?showtopic=17301
=] Awesome. This is just what I needed. Thanks.
HTC MSL
I finally got my HTC programmed and working. Everything with it is great, except now it cannot connect to the internet.
I get two kinds of error messages- initially it kept telling me that my username or password was wrong..... I couldnt find a place to enter either of those [not that i knew what they should be anyway], and I've never had this problem on my other HTC's. Now its telling me that it cannot connect for an unknown reason and that i should change the settings if needed or reset the device according to manufacturer's documentation....
What should I do?
I upgraded to wm6.1 last night, and im running USCC as my carrier.
It was suggested to me that i enter ##778 mode and change some settings there, but i do not know the MSL for my area.
Any idea where to find that?
Thanks.
Last edited by MysticThunder; Today at 01:38 AM.. Reason: new title.
Should be as simple as 000000. Same as Verizon...I just did mine, hope it works....KC
On my Titan all I did after upgrading the rom was create a new connection, called it broadband, entered #777 as the number, and my phone number followed by @vzw3g (password blank, check save password) and it worked fine.
MysticThunder said:
I finally got my HTC programmed and working. Everything with it is great, except now it cannot connect to the internet.
I get two kinds of error messages- initially it kept telling me that my username or password was wrong..... I couldnt find a place to enter either of those [not that i knew what they should be anyway], and I've never had this problem on my other HTC's. Now its telling me that it cannot connect for an unknown reason and that i should change the settings if needed or reset the device according to manufacturer's documentation....
What should I do?
I upgraded to wm6.1 last night, and im running USCC as my carrier.
It was suggested to me that i enter ##778 mode and change some settings there, but i do not know the MSL for my area.
Any idea where to find that?
Thanks.
Click to expand...
Click to collapse
there are a few settings in you need to make sure are corect in the m ip settings of the phone after u press ##778. I am using uscc and had the same issue. so I know this to be a factor after updating roms. Below are the correct settings for your m ip
Number of Profiles : 6
Active User Profile Index : 0
MIP_MODE : Mobile IP Prefered
MIP Registration Retries : 1
MIP Registration Retry Timeout : 2000 ms
MIP Pre-Registration Timeout : 3
Mobile Node-HA Authentication : Enable
Send a Registration Request Only in Use : Enable
Dormant Hanfoff Optimization: Enable
I cant stress enough... these need to be exact with uscc... dont forget to run the uscc carier cab.
If you want to have EVDO when it comes to your areas as well, under Security Settings, make sure the HDR username is your [email protected], and the ESN is in hex and all capital letters. The HDR Password is your ESN the same as above but no @uscc.net on the end.
Below this screen is also the ppp username and password, they should be your phone#@uscc.net and your phone # as the password.
These 2 settings are also necessary for data to work correctly.
BTC
guide I wrote in CDMA sub-forum, wanted to make sure everyone is aware of it.
enjoy
************************************************** ********
This is a modified guide I wrote for the instinct that will walk you through how to get your MSL code and what to do with it.
DISCLAIMER, I am ###NOT### responsible for any damage you do to your phone or your phone network with this information
************************************************** ********
some uers still getting errors, if you fall into this catagory, you can recover via SPRINT RUU which will wipe your phone
ftp://xda:[email protected]_Hero_C_Sprint_1.29.651.1_signed_release.exe
---- How to access programming and service menus---
On your phone go to the dialer, then dail in any one of these codes below and after the last # you should get the menu or it will ask for "current code" aka your MSL #
##data# (##3282#)
##debug#(##33284#)
##diag#(##3424#)
##svn#(##786#)
##prl#(##775#)
##prev#(##7738#)
##akey#(##2539#)
##vocoder# (##8626337#)
-------How to get your MSL code---------------
1) download required 3rd party apps
download demo version of CDMA WORKSHOP from
http://www.cdma-ware.com
newest version of qpst 2.7b323
http://rapidshare.com/files/297770360/qpst.zip
download of sprint's official phone as modem (PAM) software
Smartview for Windows
http://www4.sprint.com/pcsbusiness/down ... s_1.16.exe
Smartview for Macs
http://www4.sprint.com/pcsbusiness/down ... c.mpkg.zip
download HTC Sync
http://www.htc.com/us/SupportDownloa...at=3&dl_id=716
2) install the HTC HERO DIAG drivers
http://rs79.rapidshare.com/files/293...AG_Drivers.zip
3)connect your phone via usb cable
4)dial ##diag# (##3424#) on your phone for diag menu, when prompted direct windows to diag drivers listed above
5)run CDMA WORKSHOP, settings at main screen on the right are as follows
com settings (AT mode)
---------------
Port (com#) <--- click port and it should say "HTC DIAG COM PORT"
Baud rate (115200) <--- use this setting
com settings (DM mode)
---------------
Baud rate (115200) <--- use this setting
6) you should now be able to hit <connect> if it was successful you'll see in status bar <connected to com#>
7) now click <read> after a moment all your info will come up on left panel, phone # etc
8) click on security tab change the right panel setting and look for the following block
SPC/User Lock
----------------
Defualt (nv_read) <--- use this setting
9)now click read if done sucessfully you'll see the block below this option flash red and give you a number
10)note the 6 digit number under <SPC/USER LOCK> the one that flashed red, ****this is your MSL number***
***** just an additional warning***** you can REALLY and I mean REALLY screw up your phone if you change one of the settings in those menus if you don't know EXACTLY what you are doing. This isn't for the faint of heart or the random tinkerer.... just be warned
--------------------how to overwrite secondary NAI user name----------------------------------------
this section has been added because of people still reporting login errors
1)download and install qpst 2.7b323
http://rapidshare.com/files/297770360/qpst.zip
2)enter diag mode ##diag#(##3424#)
3)start qpst configuration
4)ensure it detects your phone under "ports" should be listed as FFA/SURF 7600
5)click start clients>service programming
6)highlight selected phone click "ok"
7)bottom right of service programming click "read from phone"
8)enter your MSL from steps above
9)scroll right to M.IP tab
10)select first profile listed as profile 0, should read ESN(hex)[email protected] under NAI
11)click edit, copy contents of NAI, paste contents in TETHERED NAI block (ie ESN(hex)@hcm.sprintpcs.com from profile 0)click ok
12)click write to phone, will give error, nv is read_only, disregard message
13)restart phone, follow steps 1-9 verify change took
14)your done.... get to PAM'ing
** good lord can a mod change the name to CDMA, fat fingers**
Can you fix the download link plssssssssssssssssss
The download links are messed up! Great guide though!
Would this work on the HTC EVO?
jpatterson350 said:
Would this work on the HTC EVO?
Click to expand...
Click to collapse
This is old school - there are apps for tethering now, don't forget you need root.
it's easy to get mobile hotspot free with verizon, i believe it's the same for sprint if knows the setting .... anybody willing to share how to?
http://androidforums.com/samsung-fascinate/208100-tethering-natively.html
##diag#(##3424#) is not work(evo4g).
what to do?
So, when I get to the license menu, it asks for name and serial number. How do I enter my name and what serial number do I use?
Thanks for such a newbie question.
`swamp
bump
swampy11 said:
So, when I get to the license menu, it asks for name and serial number. How do I enter my name and what serial number do I use?
Thanks for such a newbie question.
`swamp
Click to expand...
Click to collapse
After using the program for over a month, I was just randomly asked this by my device. Entering the serial number (behind the battery) did not do a thing. I tried deleting the bandswitch program from the program list (settings, delete programs). nothing. (I am not getting ANY connections)
I tried a system restore using SPB backup saved about 3 weeks ago. Tried backing up from an even further restore point with SPB backup.
nothing.
Connection manager cannot find ANY connections. unable to manually configure network. using At&t simcard never had a problem til now. everything was great. WHAT HAPPENED!?
I can't use my phone at all. I'm gonna have to wait until I get home and reflash/reinstall ROM to start fresh. But I really shouldnt have to (!). checked with at&t/cingular (california, usa) no problems with towers or anything on their end.
wtf.
swampy11 said:
So, when I get to the license menu, it asks for name and serial number. How do I enter my name and what serial number do I use?
Thanks for such a newbie question.
`swamp
Click to expand...
Click to collapse
You need to buy the license to get it, from the website..
Then need to enter the Owner Info (name). This menu is hidden by default. U need tweak to enable Owner Info. U can use BsB Tweak from here.
The owner name i located in Setting Tab >> Menu >> All Setting >> Personal >> Owner Info.
Actually, there's several alternative to Bandswitch which is free. U can use WMLongLife (search it) which have more option. Or u can add 3G Enable Comm Manager (to enable/disable 3G) and in combination with Advanced Configuration Tool (to get disconnect idle connection setting).
Bandswitch is not freeware. Install Touch Tools instead. It has an option for auto-disconnecting data, among other options.
hello guyz its my first thread and i knw its a strange questions.. i have some android apps which send IMSI number to server to verify something so i used android emulator and used hex editor to change imsi number and imei number and that was working fine but i am having an issue that andoid avd emulator dont support USB DEVICES... and i want to use USB DEVICES with those apps... so kindly is there any way to change IMSI NUMBER on any type of tablet or phone?? or is there any way to use USB DEVICE with ANDROID EMULATOR.. sorry but i am totally noob so if u gonna reply me tell in more details...
no answer
still waiting for some reply
not going to happen, technically not possible your IMSI is hardcoded onto your SIM
This guide is a copy paste from this thread:
[GUIDE] Switch software region to Upgrade to ColorOS 11 and enable Dual Sim.
I want to write this here so it's all in one place and not scattered around different threads. Apologies for the bad formatting in some parts as this is on of my first contribution. Most of this is copied from this thread: I am adding onto this...
forum.xda-developers.com
For my oppo find x 2 neo it worked.
I remind you that it precedes it and has your danger
I am not responsible for any damage or blockages
DISCLAIMER: Use this at your own discretion. So far, when it works, it doesn't wipe any personal data
and nearly no issues are caused. Still, I am not responsible for bricked devices, broken warranties or lost data.
If you haven't already, enable Developer Options and USB Debugging.
Next, download the Oppo_Free_Unlock_v1.0.zip file from the attachments and extract it somewhere.
Before you run anything, though, there's a little preparation that needs to be done.
Open Device Manager and expand the Network Adapters category.
Find your Ethernet adapter and double click it to open its properties.
Go to the Advanced tab and find the Network Address option in the Property pane.
Under the Value pane, select the radio button next to the text box and paste in the following: 704D7B61ABCD.
If you don't have an Ethernet adapter, try to find another network adapter here that has the Network Address property. It may help to install VirtualBox, since it will add fake Ethernet adapters.
Close the properties window and close Device Manager.
Go to where you extracted the unlock tools. Open Sec5.exe.
Make sure your device is in MTP mode, and then press the Unlock button.
After about a second, a string of numbers and letters should show up in the left pane. A few seconds later, "OK" should start flashing in the right pane. If it says "device not found" or something similar, make sure MTP Mode is activated. Press "Stop unlocking" and close the window.
Open the phone app on your device and dial *#3954391#. Then dial *#391#. A screen should come up with a whole bunch of regions listed. Choose this one: "Singapore Ex". Note: This Version has Theme Store, but no Ringtone Maker. Feel free to try other versions. EDIT: DO NOT CHANGE TO A REGION WITH CARRIER, ESPECIALLY THAILAND AS YOU WON'T BE ABLE TO CHANGE BACK! AT LEAST WHILE ON ANDROID 10. STICK WITH THOSE THAT END IN EX. Once you have done this, it appears that you can always bring up the region menu when dialing the numbers..
Your phone should now reboot. Once it's rebooted, your region will have changed.
Every time you changed region and want to change it again you need to use the software. You can get a code that you can use every time to change the region instead of using this software every time. (Update- one person report that this code(token) wont work for every time as his STAMP code changed.)
For this you need to: Open the dialer app , dial *#9434# ,press authtokendecrypt. You will see a IMEI and STAMP. Open the Sec5.exe and write the IMEI and STAMP shown on your phone in the blank space of the IMEI and STAMP in the software and press Generate a token, you will see a string of numbers and letters, write it on the token blank text box and click authtokendecrypt. Now you will see every text written in green. Now you can follow the steps in the guide but skip the steps that have to do with sec5. The Token that the software gave you is the same code that you need to enter in the *#9434# every time you want to change region so you do not need to use the software ever again.
UPDATE: Currently, it doesn't seem to work anymore for some people. Try installing Loopback network driver ( How to install Loopback) and uninstalling or disabling all other network drivers. If you are afraid of doing this with your own device you can use a Virtual Machine, too. I tried it this way.. Rest of the process is the same, just change the network address in Device Manager the same way as before.
Now that you are on the Pakistan Version, you can also run the device in dual sim mode, which was disabled in EU Mode. Some users have ordered Dual-Sim-trays on AliExpress and are now able to use it in this way. Also this might open up the path to unlock the bootloader, since that is limited to chinese devices only. I have not tried this out yet, though.
In theory, changing your region like this should work on any OPPO device running at least Android Pie (9). It may even work on earlier versions.
NOTE: This will not work for Chinese variants. These codes are filtered and will only work for international variants.
this guide no longer works with the new updates for both x2 pro and neo so let's avoid posting things that are not valid there is already a tutorial
*#3954391# and *#391#not working in color os 11 solution plz