Related
Hi,
I want to restock my HOX+. I found the RUUs here www-androidruu-com/?developer=ENRC2B , but I'm not quite sure wich one to use.
My HOX+ is International, Europe, HBOOT 1.70 , radio radio 3.1204.171.33 , currently running CM11 4.4.2.
Can anyone point me out to which of the RUUs should I use?
Thanks.
ady2pak said:
Hi,
I want to restock my HOX+. I found the RUUs here www-androidruu-com/?developer=ENRC2B , but I'm not quite sure wich one to use.
My HOX+ is International, Europe, HBOOT 1.70 , radio radio 3.1204.171.33 , currently running CM11 4.4.2.
Can anyone point me out to which of the RUUs should I use?
Thanks.
Click to expand...
Click to collapse
You can't use any of those unless your phone is S-OFF. The last HBOOT version that allowed to run the 1.17.xxx.x RUU was 1.35. You need stock CWM/TWRP Backup and matching boot.img + recovery, then you can go back to stock.
I'm S-ON. I was afraid of that. And of course I don't have a stock back-up.
Do they even plan to release a RUU for 1.70 ?
P.S. : This CAPTCHA sucks.
I think is your only solution: http://forum.xda-developers.com/showthread.php?t=2414238
If you can wait a few hours, I upgraded my hboot etc, which will restock you also... using the method in mikes thread, I'll do a write up for you
Sent from my Nexus 5 using Tapatalk
Lloir said:
If you can wait a few hours, I upgraded my hboot etc, which will restock you also... using the method in mikes thread, I'll do a write up for you
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Great, thanks a lot.
Btw, my HBOOT is 1.72 , I miss typed it in the original post.
@ady2pak sorry for the delay in doing this for you.
What i had done to upgrade mine from 1.35 i think it was (the following will be the same for 1.72 to pure stock)
1st up relock the bootloader (ignore restocking the recovery)
find your cid version with this app: https://play.google.com/store/apps/details?id=org.tritonsoft.cidgetter&hl=en_GB
The cid needs to be the same as the one's here http://forum.xda-developers.com/showthread.php?t=1995685
if that's all good, then i'm hoping and assuming that this is the correct cid + hboot
http://arhd.onedroid.net/db_mirror/Firmware/index.php?dir=HTC%2FHTC_One_X%2B%2F401%2F
mike1986. said:
How to flash?(bootloader needs to be relocked)
Re-lock your bootloader (this will most probably wipe content of your device)
Copy downloaded .zip to fastboot.exe location (e.g. c:/SDK/platform-tools/fastboot.exe)
Re-name .zip file to firmware.zip
Open command prompt
Boot your device in fastboot mode (vol down + power ===> fastboot)
Connect device to the PC
In command prompt cd to fastboot.exe location
Make sure you have correct modeid and cidnum (type: fastboot getvar all)
Type: fastboot oem lock (if your device is not relocked yet)
Type: fastboot oem rebootRUU and wait for device to reboot
Type: fastboot flash zip firmware.zip and wait for process to complete
Sometimes flashing for the first time doesn't work, so flash firmware.zip again just to make sure.
Type: fastboot flash zip firmware.zip and wait for process to complete
Type: fastboot reboot
Unlock your bootloader and flash custom recovery if you are going to use custom ROM.
Click to expand...
Click to collapse
IF an error shows up while doing fastboot flash zip firmware.zip, just do fastboot flash zip firmware.zip again
let me know how you get on.
My CID is HTC__032, so it should work in theory.
I'm backing up all my data and flash the firmware.
I'll let you know how it goes.
------------------------------------------------------------------------
L.E. : Doesn't work, i get this error when I try to flash the firmware.zip : FAILED (remote: 43 main version check fail)
Here's my getvar :
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.72.0000
(bootloader) version-baseband: 3.1204.171.33
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.18.401.2
(bootloader) serialno: FA2ARW103250
(bootloader) imei: 353567050563882
(bootloader) product: enrc2b_u
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PM3511000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3735mV
(bootloader) devpower: 39
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
I noticed that my Main Ver. is 2.18 , I guess that's the issue....
Read what i said
Lloir said:
@ady2pak
IF an error shows up while doing fastboot flash zip firmware.zip, just do fastboot flash zip firmware.zip again
Click to expand...
Click to collapse
ady2pak said:
My CID is HTC__032, so it should work in theory.
I'm backing up all my data and flash the firmware.
I'll let you know how it goes.
------------------------------------------------------------------------
L.E. : Doesn't work, i get this error when I try to flash the firmware.zip : FAILED (remote: 43 main version check fail)
Here's my getvar :
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.72.0000
(bootloader) version-baseband: 3.1204.171.33
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.18.401.2
(bootloader) serialno: FA2ARW103250
(bootloader) imei: 353567050563882
(bootloader) product: enrc2b_u
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PM3511000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3735mV
(bootloader) devpower: 39
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
I noticed that my Main Ver. is 2.18 , I guess that's the issue....
Click to expand...
Click to collapse
Lloir said:
Read what i said
Click to expand...
Click to collapse
I flashed about 6 times. I got the error every time.
ady2pak said:
I flashed about 6 times. I got the error every time.
Click to expand...
Click to collapse
without rebooting right? and on the black background, and green htc logo screen?
there is a 2nd one you can try
http://forum.xda-developers.com/showthread.php?t=2414238
Lloir said:
there is a 2nd one you can try
http://forum.xda-developers.com/showthread.php?t=2414238
Click to expand...
Click to collapse
You sir have my respect. Worked like a charm.
Now my HOX+ is exactly like fresh out of the box (minus the relocked bootloader).
Thank you very much for your help.
ady2pak said:
You sir have my respect. Worked like a charm.
Now my HOX+ is exactly like fresh out of the box (minus the relocked bootloader).
Thank you very much for your help.
Click to expand...
Click to collapse
glad to help
Hi Lloir, the link to your firmware is dead. Can you provide me with a working link pls?? thanks!
I have a htc one x+ international version cid001 s-off, isn"t possible to Relock the bootloader but in HBOOT it seems LOCKED
tecno321 said:
I have a htc one x+ international version cid001 s-off, isn"t possible to Relock the bootloader but in HBOOT it seems LOCKED, because I need to send it to warranty because I have a camera and display problem!
Click to expand...
Click to collapse
If you ever unlocked it before, it's void of warranty. Even if you re-lock it, HBOOT will say RE-LOCKED.
This method also works with hboot 1.40, right?
i have s - off
i have s off on my phone; using same baseband= 3.1204.171.33
i need to reflash my phone back to factory software 4.2.2 or lower .. any leads on the same?
ady2pak said:
I'm S-ON. I was afraid of that. And of course I don't have a stock back-up.
Do they even plan to release a RUU for 1.70 ?
P.S. : This CAPTCHA sucks.
Click to expand...
Click to collapse
As the title says, After I unlocked the bootloader, and flashed a 4.4 rom, My HTC will just do a boot loop on the HTC Logo, I can go into fastboot and recovery no problem but I can't send any file by USB.
Thanks on any help...
poorg said:
As the title says, After I unlocked the bootloader, and flashed a 4.4 rom, My HTC will just do a boot loop on the HTC Logo, I can go into fastboot and recovery no problem but I can't send any file by USB.
Thanks on any help...
Click to expand...
Click to collapse
You will need to post fastboot getvar all, current recovery version and which rom you are attempting to install.
poorg said:
As the title says, After I unlocked the bootloader, and flashed a 4.4 rom, My HTC will just do a boot loop on the HTC Logo, I can go into fastboot and recovery no problem but I can't send any file by USB.
Thanks on any help...
Click to expand...
Click to collapse
mb_guy said:
You will need to post fastboot getvar all, current recovery version and which rom you are attempting to install.
Click to expand...
Click to collapse
you need TWRP 2.6.3.3
here - http://techerrata.com/browse/twrp2/m7
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
then your rom will flash and boot up
Same Problem
I have the same problem, but i have instaled the TWRP Recovery and i can access in the bootloader recovery. i have the version "twrp-2.6.3.4"
what can do for recover the phone?
C:\android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4T.20.3218.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.17.502.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4275mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-a85199f7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.078s
the rom i try to install is this: m7_Stock_Rooted_4.18.502.7_Odex.zip
i think is not At&t
Please help!
Alfre Chataing said:
I have the same problem, but i have instaled the TWRP Recovery and i can access in the bootloader recovery. i have the version "twrp-2.6.3.4"
what can do for recover the phone?
C:\android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4T.20.3218.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.17.502.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4275mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-a85199f7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.078s
the rom i try to install is this: m7_Stock_Rooted_4.18.502.7_Odex.zip
i think is not At&t
Please help!
Click to expand...
Click to collapse
You could use this one then take the ota later.
http://forum.xda-developers.com/showthread.php?t=2476204
Just found this one
http://forum.xda-developers.com/showthread.php?t=2676986
Alfre Chataing said:
I have the same problem, but i have instaled the TWRP Recovery and i can access in the bootloader recovery. i have the version "twrp-2.6.3.4"
what can do for recover the phone?
C:\android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4T.20.3218.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.17.502.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4275mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-a85199f7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.078s
the rom i try to install is this: m7_Stock_Rooted_4.18.502.7_Odex.zip
i think is not At&t
Please help!
Click to expand...
Click to collapse
Yes that's my Rom ... you don't know how to flash it? or whats the problem ?
You have bootloop ? did you use all the commands when you flashed TWRP ?
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
Click to expand...
Click to collapse
and yes it's Pure AT&T from the 4.4.2 OTA update
---------- Post added at 04:22 PM ---------- Previous post was at 04:20 PM ----------
mb_guy said:
You could use this one then take the ota later.
http://forum.xda-developers.com/showthread.php?t=2476204
Just found this one
http://forum.xda-developers.com/showthread.php?t=2676986
Click to expand...
Click to collapse
he's already 3.17.502.3 ( I guess he never got the update )
and the second link is the same rom he already has why download it again ?
mb_guy said:
You could use this one then take the ota later.
http://forum.xda-developers.com/showthread.php?t=2476204
Just found this one
http://forum.xda-developers.com/showthread.php?t=2676986
Click to expand...
Click to collapse
Thanks, i used the second link with this instructions and works fine:
your going to reflash recovery then a rom
download twrp 2.6.3.3 here > http://techerrata.com/browse/twrp2/m7
then flash it in fastboot
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
then download the rom post below and sideload it to your phone
boot to recovery then
TWRP / Advanced / Sideload - swipe to sideload
From PC adb / fastboot folder
you use
adb sideload name-of-rom.zip
make sure the rom is in the same folder as adb / fastboot
Alfre Chataing said:
Thanks, i used the second link with this instructions and works fine:
your going to reflash recovery then a rom
download twrp 2.6.3.3 here > http://techerrata.com/browse/twrp2/m7
then flash it in fastboot
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
then download the rom post below and sideload it to your phone
boot to recovery then
TWRP / Advanced / Sideload - swipe to sideload
From PC adb / fastboot folder
you use
adb sideload name-of-rom.zip
make sure the rom is in the same folder as adb / fastboot
Click to expand...
Click to collapse
Good to here .. I've posted those instructions dozens of times, glad I could help
clsA said:
Good to here .. I've posted those instructions dozens of times, glad I could help
Click to expand...
Click to collapse
Yes, my friend thanks!
i cant write early and give the thanks because i'm new in XDA a cant write several times.
Best regards!
I have my htc one back to the stock room 4.1.2 sideload via adb. Thanks to the developers.
** UPDATE **
Got past the stuck screen by doing this:
http://forum.xda-developers.com/showthread.php?t=2386084 Jeez.
Tried to install the .12 RUU but this failed repeatedly with an error 155. Wasn't sure if this was caused by a newer HBOOT or a different firmware. Downloaded a KK RUU from here:
http://forum.xda-developers.com/showthread.php?t=2428276
Almost back to stock. Now need to get rid of the RELOCKED message in the bootloader. Will attack that later.
I'm trying to get my phone back to stock so I can return it to AT&T due to the purple camera problem. What I was attempting to do was to restore a 4.1.2 JB nandroid backup, then install an RUU as described in post #55 here:
http://forum.xda-developers.com/showthread.php?t=2394155&page=6
I had changed the cid number back to CWS__001 and restored the nandroid backup. When I went to reboot the phone I got the AT&T animation, then the HTC One screen. This is where I'm stuck. I can't reboot into recovery or anything. Is this phone recoverable or am I SOL? Thanks for any help.
These were my settings before I started this.
C:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT*************
(bootloader) imei: ********************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4103mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bee46337
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.073s
Stay s-off, lock bootloader with revone -l, then flash 3.17.502.3 RUU. That should do it.
RUU : http://www.androidruu.com/getdownlo...13_10.38j.1157.04_release_334235_signed_2.exe
I'm also trying to revert to stock in order to return to HTC for purple tint issue. I am running an AT&T HTC One.
Originally, I followed the instructions on this thread and basically converted my phone to GPE (http://forum.xda-developers.com/showthread.php?t=2358781).
To revert to stock I followed these instructions (http://www.htc1guru.com/guides/return-stock-guide/) multiple times and kept failing getting the error 155 message. I was using the RUU.exe file. Eventually I got stuck and decided to follow another post on a different site. That post had me re-lock the bootloader and rever to S-ON. Then all went to hell. Bootloop city.
I was able to load TWRP recovery and I side-loaded a different ROM that I had from when I was first tinkering around with custom ROMs (the one described here http://htconeroot.com/htc-one-stock-roms/android-4-4-kitkat-sense-5-5-stock-rom-for-htc-one/). It booted but threw tons of errors and was unusable. So, I re-unlocked my bootloader (still S-ON) and this time ran the RUU.exe (named RUU_M7_UL_JB_50_Cingular_US_1.26.502.12_Radio_4A.14.3250.13_10.33.1150.01_release_318450_signed_2.exe). Only instead of run through the GUI I tried to use fastboot to load the rom.zip that was extracted to a temp folder. It ran but ended up failing with the error "FAILED (status read failed (Too many links))."
I believe I then reinstalled the rom from (http://htconeroot.com/htc-one-stock-roms/android-4-4-kitkat-sense-5-5-stock-rom-for-htc-one/) and now it it boots and is "working."
Here is where I am at:
TAMPERED
UNLOCKED
S-ON
hboot 1.54
TWRP 2.6.3.3 recovery (note: when I boot into recovery i see a Google logo with an unlocked padlock)
this ROM, rooted: http://downloadandroidrom.com/file/HTCOne/M7/roms/Sense4.4/One_4.06.1540.2_odexed.zip
When I boot the system from power off I get the htc animation with no other warning text
If I boot the system from TWRP recovery I first get the Google logo with an unlocked padlock, followed by the htc animation with no other warning text.
I assume I need to go back to S-OFF, lock the bootloader and run an RUU, but I'm concerned about the error 155, as well as the "too many links" error.
Here is the log from the RUU.exe that fails:
Code:
<T135636><DEBUG><CMD>htc_fastboot -s H******* -d flash zip C:\Users\o****\AppData\Local\Temp\{A08E6688-8B3D-493C-BEF3-013152BF8F99}\{50F2F878-636A-496F-A7CB-544C067E0C4B}\rom.zip</CMD>
</DEBUG></T135636>
<T135844><DEBUG><OUT>sending 'zip'... (1029872 KB) OKAY</OUT>
</DEBUG></T135844>
<T135844><DEBUG><OUT>writing 'zip'... (bootloader) adopting the signature contained in this image...</OUT>
</DEBUG></T135844>
<T135844><DEBUG><OUT>(bootloader) signature checking...</OUT>
</DEBUG></T135844>
<T135844><DEBUG><OUT>(bootloader) rom parsing start ...</OUT>
</DEBUG></T135844>
<T135844><DEBUG><OUT>(bootloader) rom parsing finish ...</OUT>
</DEBUG></T135844>
<T135844><DEBUG><OUT>(bootloader) zip header checking...</OUT>
</DEBUG></T135844>
<T135844><DEBUG><OUT>(bootloader) zip info parsing...</OUT>
</DEBUG></T135844>
<T135844><DEBUG><OUT>FAILED (status read failed (Too many links))</OUT>
</DEBUG></T135844>
<T135927><DEBUG><CMD>adb kill-server</CMD>
Code:
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
Any help would be greatly appreciated.
cschmitt said:
Stay s-off, lock bootloader with revone -l, then flash 3.17.502.3 RUU. That should do it.
Click to expand...
Click to collapse
The revone switch worked. I wasn't sure if it would since I was on 4.4.2 and what I have READ didn't really say it would work or not since it was for 4.2 ROMs. The RUU in your link just gave me the error 155, so I installed the KK RUU I linked above. Took the phone by AT&T today and got it switched out.
BTW, thanks for the NOOB link, much appreciated, since I spend hours reading through these forums.
ZBell said:
The revone switch worked. I wasn't sure if it would since I was on 4.4.2 and what I have READ didn't really say it would work or not since it was for 4.2 ROMs. The RUU in your link just gave me the error 155, so I installed the KK RUU I linked above. Took the phone by AT&T today and got it switched out.
BTW, thanks for the NOOB link, much appreciated, since I spend hours reading through these forums.
Click to expand...
Click to collapse
If you don't mind, which RUU specifically?
ocieb said:
If you don't mind, which RUU specifically?
Click to expand...
Click to collapse
this is the only kitkat RUU for AT&T
http://www.androidruu.com/getdownlo...09_10.26.1718.01L_release_356565_signed_2.exe
clsA said:
this is the only kitkat RUU for AT&T
Click to expand...
Click to collapse
Thanks. Do I need S-OFF to flash this RUU? I am unlocked and rooted but don't have S-OFF and it wouldn't flash. It starts sending 1/5 and then the program freezes up and windows error recovery comes up and I get a 171 error. I'm also running TWRP recovery.
ocieb said:
Thanks. Do I need S-OFF to flash this RUU? I am unlocked and rooted but don't have S-OFF and it wouldn't flash. It starts sending 1/5 and then the program freezes up and windows error recovery comes up and I get a 171 error. I'm also running TWRP recovery.
Click to expand...
Click to collapse
no you don't need s-off .. but your not the first to have an error while trying to flash it. funny it worked fine for me
clsA said:
no you don't need s-off .. but your not the first to have an error while trying to flash it. funny it worked fine for me
Click to expand...
Click to collapse
I just get an error message saying htc_fastboot.exe has stopped working.
I tried extracting the zip from a temp folder and flashing it but I get this back:
Code:
c:\HTCOne\adt-bundle-windows-x86_64-20131030\sdk\platform-tools>fastboot flash zip rom.zip
target reported max download size of 1526722560 bytes
Invalid sparse file format at header magi
In the meantime, I may have screwed myself up even more (or potentially not?).
After the above error messages, I went in search of an alternative method to get myself up and running again. I followed the instructions by OP in this post http://forum.xda-developers.com/showthread.php?t=2283112 and they "worked." However, when the phone boots my touchscreen is unresponsive. I no longer am lock and I have S-ON. Rest of the info should be below.
If you see my post above, I am coming from GPE. Could the baseband/radio be causing this issue?
In the bootloader I see
TAMPERED
RELOCKED
Here is my getvar dump
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.21.3218.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT***
(bootloader) imei: ***
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4182mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e82187e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
I'm just trying to get to a point where I can send this back to HTC and get my purple tint issue fixed. Any help would be greatly appreciated!
ocieb said:
I just get an error message saying htc_fastboot.exe has stopped working.
I tried extracting the zip from a temp folder and flashing it but I get this back:
Code:
c:\HTCOne\adt-bundle-windows-x86_64-20131030\sdk\platform-tools>fastboot flash zip rom.zip
target reported max download size of 1526722560 bytes
Invalid sparse file format at header magi
In the meantime, I may have screwed myself up even more (or potentially not?).
After the above error messages, I went in search of an alternative method to get myself up and running again. I followed the instructions by OP in this post http://forum.xda-developers.com/showthread.php?t=2283112 and they "worked." However, when the phone boots my touchscreen is unresponsive. I no longer am lock and I have S-ON. Rest of the info should be below.
If you see my post above, I am coming from GPE. Could the baseband/radio be causing this issue?
In the bootloader I see
TAMPERED
RELOCKED
Here is my getvar dump
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.21.3218.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT35GW916488
(bootloader) imei: 354439055183836
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4182mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e82187e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
I'm just trying to get to a point where I can send this back to HTC and get my purple tint issue fixed. Any help would be greatly appreciated!
Click to expand...
Click to collapse
yeah I knew the rom.zip won't flash but the RUU worked ... try this RUU
http://dl3.htc.com/application/RUU_...13_10.38j.1157.04_release_334235_signed_2.exe
clsA said:
yeah I knew the rom.zip won't flash but the RUU worked ... try this RUU
http://dl3.htc.com/application/RUU_...13_10.38j.1157.04_release_334235_signed_2.exe
Click to expand...
Click to collapse
Thanks, I'll try this. Should it matter that I'm relocked and S-ON?
Also, I want to run this exe while my phone is connected to my computer and un fastboot usb, correct?
---------- Post added at 07:14 PM ---------- Previous post was at 06:51 PM ----------
Hi again,
Just failed both using the exe and extracting the rom.zip file. Any advice?
I was thinking of trying to go back to full GPE and either starting over, or just sending the device in like that and keeping my fingers crossed
cschmitt said:
Stay s-off, lock bootloader with revone -l, then flash 3.17.502.3 RUU. That should do it.
RUU : http://www.androidruu.com/getdownlo...13_10.38j.1157.04_release_334235_signed_2.exe
Click to expand...
Click to collapse
Is a locked bootloader needed to run a signed ruu.exe when S-OFF? I thought lock status didn't matter when S-OFF. Or was that to just get rid of the RELOCKED banner the OP had? I may need to run this as well, so just need to make sure. Thanks.
sharksfan7 said:
Is a locked bootloader needed to run a signed ruu.exe when S-OFF? I thought lock status didn't matter when S-OFF. Or was that to just get rid of the RELOCKED banner the OP had? I may need to run this as well, so just need to make sure. Thanks.
Click to expand...
Click to collapse
Locked bootloader is not require to RUU when s-off. OP just wanted to remove relocked.
I have an AT&T M8 which has an old version of the GPE SkyDragon ROM installed.
Bootloader is unlocked, S-ON is still ON.
Android version: 5.0.1
Baseband version: [email protected]_40.34.C35006.02_F
Kernel version: 3.4.0-SkyDragon-V3.0.7 from Jan 2014.
Build number: SkyDragon - LRX22C.H5
I want to send this phone to another country, and for that I need to get it sim-unlocked. I got the unlock code from AT&T, but it doesn't work - I am assuming the ROM is at fault, so I am trying to get the phone back to full stock by flashing an official RUU.
I downloaded the latest official RUU from http://www.htc.com/us/support/htc-one-m8-att/news/, but I cannot get it to flash!
When trying and the phone is booted to regular android, it tells me about error 170, which, as I gather, means it cannot find the phone.
I installed HTC Sync, and that can't find the phone either.
If I reboot to bootloader, the RUU installer finds the phone, but after the HTC logo (silver with black background) shows up on the phone, it throws error 171.
It feels like I need to relock the bootloader but I am afraid to mess it up now.
Please help with some guidance..
Here is the bootloader screen:
Edit: Found an old RUU on my hard drive, version 3.42.502.1 - same as OS version in the screenshot.
I attempted to flash it (using the official exe). It failed on "updating signature" with error 155.
Edit2: Made sure CID and MID match original - they do.
Attempted 'fastboot oem lock'. Now trying to flash the old RUU again.
Edit3: Looks like it's working! RUU is progressing further than ever before.
Edit4: It worked! Booting to Sense now.
Edit5: SIM unlocked worked too, phone is ready to go.
I'll leave this post up in case someone else faces a similar situation.
To run the Marshmallow RUU, try to flash the MM firmware first. See the red font note under the RUU section of my Index thread: http://forum.xda-developers.com/showthread.php?t=2751432
I was actually able to just flash the latest official RUU over 3.42.502.1 without the need for commandline.
Back to Stock
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.20.502.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT45SWM06618
(bootloader) imei: XXXXXXXXXXXXXXX ( Deleted)
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.125s
Bootloader - Unlocked
Recovery - TWRP
Rooted - Yes
Custom ROM - Resurrection Remis 5.8.5 Final
if want to go back to stock what is procedure
i have below RUU
RUU_M8_UL_M60_SENSE70_ATT_MR_Cingular_US_6.20.502. 5_combined.exe
can i run this exe after relock the bootloader?
Appreciate any help. I'm considering all options. My phone got stuck on the boot screen after taking a security update and I was wondering if it's possible to just flash the Marshmallow RUU , i don't mind losing the data its already backed up.
Unlocked bootloader, S-OFF
Variant - M8_UL_CA
CID - BS_US001
OS - 4.16.1540.8
You'll need to flash the MM firmware first (this is a peculiarity with the MM RUU - if you don't the RUU will fail with Error 155), then flashing the RUU is fine.
Also, in the current configuration, you'll need to flash the Developer's Edition RUU (not sure if that is what you meant).
But otherwise, if you are fine with losing your data, I don't seen an issue with running the RUU.
Back to stock
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.20.502.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT45SWM06618
(bootloader) imei: XXXXXXXXXXXXXXX ( Deleted)
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.125s
Bootloader - Unlocked
Recovery - TWRP
Rooted - Yes
Custom ROM - Resurrection Remis 5.8.5 Final
if want to go back to stock what is procedure
i have below RUU
RUU_M8_UL_M60_SENSE70_ATT_MR_Cingular_US_6.20.502. 5_combined.exe
can i run this exe after relock the bootloader?
safrassm said:
Bootloader - Unlocked
Recovery - TWRP
Rooted - Yes
Custom ROM - Resurrection Remis 5.8.5 Final
if want to go back to stock what is procedure
i have below RUU
RUU_M8_UL_M60_SENSE70_ATT_MR_Cingular_US_6.20.502. 5_combined.exe
can i run this exe after relock the bootloader?
Click to expand...
Click to collapse
Yes.
Need Ruu .zip for HTC M8 for this variant
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.1112
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA46DSF03997
(bootloader) imei: 990004992158356
(bootloader) imei2: Not Support
(bootloader) meid: 99000499215835
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.019s
Bootloader - Unlocked
Recovery - TWRP
Rooted - yes
Custom ROM - lenage 14.1
shihab94rs said:
74616699(bootloader) product: m8_whl
(bootloader) modelid: 0P6B70000
Click to expand...
Click to collapse
The info above indicates you have the Sprint version. This forum section is specific to the AT&T version M8.
The RUU zips you are looking for, are here: https://forum.xda-developers.com/showthread.php?t=2729173
Also, you should delete your IMEI, serial number, and MEID from the getvar data. Those are personal info, that should never be posted in open forums.
help
Good evening,
I currently have an HTC one M8 under:
version Android: 5.0.2
version sense: 6.0
version ROM 4.28.502.2
I would like to update my Android phone Marshmallow. I am a little lost on the forums.
Thank you for your help.
***Software status: Official ***
***RELOCKED ***
M8_UL PVT SUIP S-OFF
CI-11111111
HBOOT-3.19.0.0000
[email protected]
OpenDNP-v47.2.2-00564-M8974_FO.1024
OS-4.28.502.2
eMMC-boot 2048MB
info tel:
fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 3.19.0.0000
INFOversion-baseband: [email protected]
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 4.28.502.2
INFOversion-misc: PVT SHIP S-OFF
INFOserialno: SH43XXXXXXXX
INFOimei: 35XXXXXXXXXXXXX
INFOimei2: Not Support
INFOmeid: 00000000000000
INFOproduct: m8_ul
INFOplatform: hTCBmsm8974
INFOmodelid: 0P6B10000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 0mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 7f8e91a3
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
-----------------------
Hombalala said:
Good evening,
I currently have an HTC one M8 under:
version Android: 5.0.2
version sense: 6.0
version ROM 4.28.502.2
Click to expand...
Click to collapse
Look in my Index thread under "RUU" and you will find a link for the Marshmallow RUU 6.20.502.5 as well as a note (in red font) on flashing the firmware.zip before installing the RUU.
So flash the firmware.zip in fastbootRUU mode, than install the RUU (with phone connected to PC). That is all you need to do.
Did you relock the bootloader to run an RUU, or was it already relocked when you got the phone?
redpoint73 said:
Look in my Index thread under "RUU" and you will find a link for the Marshmallow RUU 6.20.502.5 as well as a note (in red font) on flashing the firmware.zip before installing the RUU.
So flash the firmware.zip in fastbootRUU mode, than install the RUU (with phone connected to PC). That is all you need to do.
Did you relock the bootloader to run an RUU, or was it already relocked when you got the phone?
Click to expand...
Click to collapse
it already unlocked when you got the phone
Hombalala said:
it already unlocked when you got the phone
Click to expand...
Click to collapse
I think you mean to say: the phone was already bootloader relocked when I got the phone.
In any case, you can do as I stated in the previous post. Backup any personal data you want to keep, before you install the RUU. The RUU will wipe the phone.
redpoint73 said:
I think you mean to say: the phone was already bootloader relocked when I got the phone.
In any case, you can do as I stated in the previous post. Backup any personal data you want to keep, before you install the RUU. The RUU will wipe the phone.
Click to expand...
Click to collapse
So do i need my bootloader locked before trying to install MM Firmware then MM Ruu? I am on the same version as of Android 5.0.2, Software 4.28.502.1 and Sense 6.0 as Homblala up above. Mine HTC One M8 is an ATT Version
ELEVO said:
So do i need my bootloader locked before trying to install MM Firmware then MM Ruu?
Click to expand...
Click to collapse
Correct. Bootloader must be locked or relocked to flash firmware and/or RUU. Unlocked bootloader will not allow firmware/RUU to install. Exception is if you have s-off (which bypasses the requirement to relock the bootloader).
Unbricked )
redpoint73 said:
Correct. Bootloader must be locked or relocked to flash firmware and/or RUU. Unlocked bootloader will not allow firmware/RUU to install. Exception is if you have s-off (which bypasses the requirement to relock the bootloader).
Click to expand...
Click to collapse
Thanks for the help. I soft bricked my phone while trying to flash MM firmware so I can install Lineage 15.1 along with Gapps 8.1
All running well now, Thanks all for your help :good:
ELEVO said:
Thanks for the help. I soft bricked my phone while trying to flash MM firmware so I can install Lineage 15.1 along with Gapps 8.1
Click to expand...
Click to collapse
I know what you did. I just don't think you do.
Read my responses to your other threads/posts for a more detailed explanation. No boot after flashing firmware is completely normal and expected. I told you to flash firmware and RUU. You only did firmware.