I'm sorry for same questions. But I have your help to unbrick my devices. :crying:
Devices information :
Product Name : MITO
Hardware : MT6577
Model : T720
Build number : GM1502_M17_V1.6
Build date UTC : 20130121-062156
Android v : 4.0.4
Baseband v: GM1502_M17_V1.1, 2013/01/14 16:53
Kernel v : 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 SMP Mon Jan 21 14:15:59 CST 2013
RAM : 512 - ROM: 4GB
I do flashing with SP_Flash_Tool_v3.1224.01 for this device . But never successfully processed . Though I have used the stock rom I had a previous backup of the other similar device . When running on a flashing red bar reaches 100 % , always an error with the message : BROM_ERROR : S_DL_GET_DRAM_SETTING_FAIL ( 5054 ) .
I have tried many times some existing solutions in this forum . But still there is no way I can get in to flashing on the device . Here are the steps I did in when flashing with tools :
1 . Turning off and unplugging devices battery (I also have tried to flash with battery but failed)
2 . Plug in USB cable to the devices ( but not to the PC )
3 . Installing the USB VCOM driver for MTK MTK6577
4 . Running SP Flash Tool and enter Scatter File
5 . Click the "Download" button on the SP Flash Tools
6 . Plug in the USB cable from the devices to the computer while pressing the volume up button .
7 . Looking into the computer screen flashing process is happening .
Initially there is a process with a red bar marks . Device driver is detected as well ( seen in the device manager ) . When the bar reaches 100 % in the red , the device is detected by the DA USB VCOM port ( COM 28 ) . But immediately displays an error message BROM_ERROR : S_DL_GET_DRAM_SETTING_FAIL ( 5054 ) and the process of flashing the device failed .
I 've tried to uninstall the drivers from USBDeview tools and also through the Device Manager and then install the driver again . But the result remains the same . Port MTK Preloader was never detected . I tried flashing again with a different usb port results also failed . I use the Windows 8 operating system for flashing . I tried with the Windows XP system too but still failed .
Is there a way to revive my device ? . I really - really need your help .
Thank you for the solution that is given . :angel:
That error because flashing wrong preloader and dsp_bl. You can use preloader and dsp_bl from mito A300. I Successfull solve that error and unbrick my Mito T720.
on windows 8 try to disable driver signature verification,and install again your mtk driver
[HELP] Not fully solved
patenpisan said:
That error because flashing wrong preloader and dsp_bl. You can use preloader and dsp_bl from mito A300. I Successfull solve that error and unbrick my Mito T720.
Click to expand...
Click to collapse
Thank's, I Successfull solve that error and unbrick this device. but i have a new problem. Invalid IMEI and no SIM card detected, and Unknown Baseband. Can u help me to fix it again ?,
sonloy777 said:
Thank's, I Successfull solve that error and unbrick this device. but i have a new problem. Invalid IMEI and no SIM card detected, and Unknown Baseband. Can u help me to fix it again ?,
Click to expand...
Click to collapse
You need correct modem.img from same baseband
hi, i've got the same problem on my elephone p2000. how can i fix the invalid IMEI issue? wich file i need? thanks
hardbricked
Devices information :
Product Name : Micromax canvas fun
Hardware : MT6572
Model : a74
Android v : 4.2.2
Baseband v:
Kernel v : 3.4.5
RAM : 512 - ROM: 4GB
I do flashing with SP_Flash_Tool_v3.1224.01 for this device . But never successfully processed . Though I have used the stock rom I had a previous backup of the other similar device . When running on a flashing red bar reaches 100 % , always an error with the message : BROM_ERROR : S_DL_GET_DRAM_SETTING_FAIL ( 5054 ) .
I have tried many times some existing solutions in this forum . But still there is no way I can get in to flashing on the device . Here are the steps I did in when flashing with tools :
1 . Turning off and unplugging devices battery (I also have tried to flash with battery but failed)
2 . Plug in USB cable to the devices ( but not to the PC )
3 . Installing the USB VCOM driver for MTK MTK6572
4 . Running SP Flash Tool and enter Scatter File
5 . Click the "Download" button on the SP Flash Tools
6 . Plug in the USB cable from the devices to the computer while pressing the volume up button .
7 . Looking into the computer screen flashing process is happening .
Initially there is a process with a red bar marks . Device driver is detected as well ( seen in the device manager ) . When the bar reaches 100 % in the red , the device is detected by the DA USB VCOM port ( COM 28 ) . But immediately displays an error message BROM_ERROR : S_DL_GET_DRAM_SETTING_FAIL ( 5054 ) and the process of flashing the device failed .
I 've tried to uninstall the drivers from USBDeview tools and also through the Device Manager and then install the driver again . But the result remains the same . Port MTK Preloader was never detected . I tried flashing again with a different usb port results also failed . I use the Windows 8 operating system for flashing . I tried with the Windows XP system too but still failed .
Is there a way to revive my device ? . I really - really need your help .
error 5054
hi, same problem as in the previous post
my Orange Yomi/ Alcatel ONE TOUCH Pop C1(4015x) (MT6572) is totaly dead, does not respond to any commands. power + vol up / power + vol down / power + vol up + vol down or others, and not enter into recovery mode / fastboot.
I tried to make flash and stoped during surgery and then dead.
I tried many programs but without any result.
sp tools gives me error 5054.
I have a chance to fix it?
ps : the battery is fully charged and is healt
thanks
sorry for my bad english
allviewA4YOU said:
hi, same problem as in the previous post
my Orange Yomi/ Alcatel ONE TOUCH Pop C1(4015x) (MT6572) is totaly dead, does not respond to any commands. power + vol up / power + vol down / power + vol up + vol down or others, and not enter into recovery mode / fastboot.
I tried to make flash and stoped during surgery and then dead.
I tried many programs but without any result.
sp tools gives me error 5054.
I have a chance to fix it?
ps : the battery is fully charged and is healt
thanks
sorry for my bad english
Click to expand...
Click to collapse
Did you solve it? I have the same issue but different device.
Thanks.
allviewA4YOU said:
hi, same problem as in the previous post
my Orange Yomi/ Alcatel ONE TOUCH Pop C1(4015x) (MT6572) is totaly dead, does not respond to any commands. power + vol up / power + vol down / power + vol up + vol down or others, and not enter into recovery mode / fastboot.
I tried to make flash and stoped during surgery and then dead.
I tried many programs but without any result.
sp tools gives me error 5054.
I have a chance to fix it?
ps : the battery is fully charged and is healt
thanks
sorry for my bad english
Click to expand...
Click to collapse
my phone ecoo e04 it's dead
when i flashing itstop 100% red line
and no competet
error 5054
please help me
please i have the same problem with my viwa max . i made a scatter file using mtk droid tools and whiles flashing with sp flash tool. the phone went off. now is not booting but when i connect i see com port at device manager.
any help please?
Help me the problem are the brom error s_dl_get_dram_setting_fail ..
I am getting the EXACT same symptoms. My Golden Warrior A806 does not power on with any button combination and does not power on when charging. SP Flash Tool can recognise the phone when I try to flash to it or format it, but when the red bar reaches 100%, SP Flash Tool waits 11 seconds EVERY TIME, then spits out the error code 5054.
I have also the same problem but in Huwaei Ascend G750 - u10 please help
I am facing the similar issue with my unite 2 a 106. Can anyone please give a detailed process to resolve this issue?
I have the same problem with Zte Blade A1 (c880u)
im having the same problem with Cube T8 Plus...
anyone found a solution yet ?
Another dead cell phone
Alcatel PIXI3 4009E
Same Issue here . . .
Cubot Note S - Flash the Phone with SPFlashTool -> TWRP 3.0.2 (as before at same Device) - Get Dram Setting Failed
Thats mean, the flash don't work/start/end or not? . . . but the Phone ist bricked . . . whats that ???
Same Issue now when I want to "format whole flash without bootloader" . . .
no solution until yet
EDIT:
SP_Flash_Tool w/o battery -> MediaTek USB Port (COM19) -> DA Download red until 100% than stop and error
SP_Flash_Tool with battery -> MediaTek DA USB VCOM (Android) (COM20) -> no DA Download / not recognized
. . . what can I do . . . ?
In my case it ist possible, that the ROM is wrong
masichka05 (forum . cubot . net)
There were phones with another PMT !!!
Now there are 3 types
1.EMMC_PART_USER Size = 0x00000003ae300000(14910MB)
2.EMMC_PART_USER Size = 0x00000003ab400000(15028MB)
3.EMMC_PART_USER Size = 0x00000003ab800000(15032MB)
Where a new firmware for the new layout? Our phones do not work after flash ... ROM
Click to expand...
Click to collapse
How can I check witch "EMMC_PART_USER Size" my device has ?
plz help
My phone is dead after I flash a wrong preloader
my phone model is iNEW M1
I try with ALL ROM on needrom.com with keyworld /
iNEW M1 Mobile Phone " "mtk6589" ... about 20 ROM but I get Enable DRAM FAILED for each try
Use case :
1- Disconnet the battery and wait 10 seconds
2- Open flash tools with the scatter file
3- Connect the phone usb cable to pc
4- Plug the batterie on the phone
==> MTK USB PORT (COM XX) ok : drivers on the pc seems to be ok
5- On flash tools press download
every time I get BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM fail
on the web they say the cause is the wrong ROM but I don't know (I try over than 20 ROM)
plz help me sorry about my english
Hello to all,
Everything went wrong on flashing with SP Flash tool. The Preloader of Scattered file was checked and all others.
The problem is strange for me and I see that there are other with the same issue without an answer.
Fist of all I did everything described in forums. The driver of MT Preloader Vcom port is installed correctly. In Device Manager LTP com port is detected and as it is normal it disconnects in 2-5 seconds. If I change the USB port on PC it changes the COM port which is the previous detected.
The issue is that my latest SP Flash Tool 5.14 or even 3.13 older one, can't establish permanent connection with the COM port of the MTK 6589. I tested with different cables and different OS (XP and Windows 7 32 bit) on different computers with first pressing Download button of SP Flash Tool and then plugging the cable. If I don't press Volume Down button of my Huawei Ascend G610s it can't be dected of SP Flash. After pressing Volume Down the enters into Meta mode BUT .... SP Flash Tool report:
BROM ERROR : S_BROM_DOWNLOAD_DA_FAIL (2004)
[H/W] Fail to download DA to baseband chip's internal SRAM
[HINT]: 1. There's an cable communication problem between FlashTool and BootROM.
2. Target might be shutdown unexpectedly or target lost power supply.
[ACTION]
1. Try again.
2. Proceed H/W checking in download cable and target side com port.
3. Monitor if power-drop occured in target side.
At some reason COM port is constantly disconnecting and connecting without establishing permanent connection with SP Flash Tool. The red bar pops up and shows 100% done.
Any idea for this issue? You will help a lot of people which don't have the answer what to do.
Best Regards
niki_help said:
Hello to all,
Everything went wrong on flashing with SP Flash tool. The Preloader of Scattered file was checked and all others.
The problem is strange for me and I see that there are other with the same issue without an answer.
Fist of all I did everything described in forums. The driver of MT Preloader Vcom port is installed correctly. In Device Manager LTP com port is detected and as it is normal it disconnects in 2-5 seconds. If I change the USB port on PC it changes the COM port which is the previous detected.
The issue is that my latest SP Flash Tool 5.14 or even 3.13 older one, can't establish permanent connection with the COM port of the MTK 6589. I tested with different cables and different OS (XP and Windows 7 32 bit) on different computers with first pressing Download button of SP Flash Tool and then plugging the cable. If I don't press Volume Down button of my Huawei Ascend G610s it can't be dected of SP Flash. After pressing Volume Down the enters into Meta mode BUT .... SP Flash Tool report:
BROM ERROR : S_BROM_DOWNLOAD_DA_FAIL (2004)
[H/W] Fail to download DA to baseband chip's internal SRAM
[HINT]: 1. There's an cable communication problem between FlashTool and BootROM.
2. Target might be shutdown unexpectedly or target lost power supply.
[ACTION]
1. Try again.
2. Proceed H/W checking in download cable and target side com port.
3. Monitor if power-drop occured in target side.
At some reason COM port is constantly disconnecting and connecting without establishing permanent connection with SP Flash Tool. The red bar pops up and shows 100% done.
Any idea for this issue? You will help a lot of people which don't have the answer what to do.
Best Regards
Click to expand...
Click to collapse
I have the same problem please help
Hi ...what is the phone model?
In my case the issue was solved with a hardware "kick" with button combination because at some reason the MTK preloader was put the phone in nonsense turning on and off the without being able to establish permanent connection. I tried all the MTK drivers but the issue was some kind of bug which actually was constant switching off. My model phone was Huawei G610s. What I did was to hold Power, +, - button together for about 5 seconds then release power still holding + and - button, and after 4-5 seconds release + button while holding - button for 4 seconds. This kicked out from the constant disconnection and SP flash tool was able to finalize the flash. Without this every time the error was as your have described.
Q&A for [guide] how to root and install cwm recovery on lava iris 455
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [guide] how to root and install cwm recovery on lava iris 455. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Help problem solved for BROM_ERROR : S_DL_GET_DRAM_SETTING_FAIL (5054)
I do flashing with SP_Flash_Tool_v3.1224.01 for this device . But never successfully processed . Though I have used the stock rom I had a previous backup of the other similar device . When running on a flashing red bar reaches 100 % , always an error with the message : BROM_ERROR : S_DL_GET_DRAM_SETTING_FAIL ( 5054 ) .
I have tried many times some existing solutions in this forum . But still there is no way I can get in to flashing on the device . Here are the steps I did in when flashing with tools :
1 . Turning off and unplugging devices battery (I also have tried to flash with battery but failed)
2 . Plug in USB cable to the devices ( but not to the PC )
3 . Installing the USB VCOM driver for MTK MTK6577
4 . Running SP Flash Tool and enter Scatter File
5 . Click the "Download" button on the SP Flash Tools
6 . Plug in the USB cable from the devices to the computer while pressing the volume up button .
7 . Looking into the computer screen flashing process is happening .
Initially there is a process with a red bar marks . Device driver is detected as well ( seen in the device manager ) . When the bar reaches 100 % in the red , the device is detected by the DA USB VCOM port ( COM 28 ) . But immediately displays an error message BROM_ERROR : S_DL_GET_DRAM_SETTING_FAIL ( 5054 ) and the process of flashing the device failed .
I 've tried to uninstall the drivers from USBDeview tools and also through the Device Manager and then install the driver again . But the result remains the same . Port MTK Preloader was never detected . I tried flashing again with a different usb port results also failed . I use the Windows 8 operating system for flashing . I tried with the Windows XP system too but still failed .
Is there a way to revive my device ? . I really - really need your help .
Dear all
I have already finished flashing TWRP 2.6.3.0 for my phone, after few day i try to flash TWRP 2.7.1.0 so my phone was brick . Now flash tool don't work when i try to flash row rom (the counter don't work & highlight indicator don't show yellow,green,red)
preloader usb vcom port don't appear as normal (2 second) after pluging the cabe. I think this is the reason that i can't use flashtool. Instead of DA usb vcom port exist long time when plugging cabe
Can you show me the hot keys that reset S860
Please show me How to fix it (please see image below)