i was not able to flash any custom rom on my friend's Spice mi280
procedure was correct as it was same i do on my sgy
so i tried to flash its stock rom via SP Flash Tool exe v3.1145.05 using stock rom zip from dropbox to start afresh
but everytime i attaches phone through usb it gives this error
---------------------------
Smart Phone Flash Tool
---------------------------
BROM ERROR : S_BROM_CMD_STARTCMD_FAIL (2005)
[BROM] Can not pass bootrom start command via USB cable!
[HINT]:
1. Possibly target power up too early, please try again.
2. Load in the phone does not support bootloader download DA, please try to use BootRom download DA instead.
How to use BootRom download DA?
Step1. Unplug battery and USB cable in the target.
Step2. Plug in battery.
Step3. Press USB download key and do not loose it.
Step4. Plug in USB cable.
Step5. After DA is downloading, USB download key could be loosed.
Step6. If it dose not work, please retry from Step1 to Step6.
---------------------------
OK
---------------------------
phone if switched off and everything is as written here
http://forum.xda-developers.com/showthread.php?p=30254498#post30254498
mi280
Please I need flash tool and files for my mi280
Pleas help...
got any solution for this ?
naren.deora said:
Please I need flash tool and files for my mi280
Pleas help...
Click to expand...
Click to collapse
I'm getting the same error " can not pass bootrom start command! Possibly target Supply was too early "
Hey
Hey
I'm sorry for same questions. But I have your help to unbrick my devices. :crying:
Devices information :
Product Name : MITO
Hardware : MT6577
Model : T720
Build number : GM1502_M17_V1.6
Build date UTC : 20130121-062156
Android v : 4.0.4
Baseband v: GM1502_M17_V1.1, 2013/01/14 16:53
Kernel v : 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 SMP Mon Jan 21 14:15:59 CST 2013
RAM : 512 - ROM: 4GB
I do flashing with SP_Flash_Tool_v3.1224.01 for this device . But never successfully processed . Though I have used the stock rom I had a previous backup of the other similar device . When running on a flashing red bar reaches 100 % , always an error with the message : BROM_ERROR : S_DL_GET_DRAM_SETTING_FAIL ( 5054 ) .
I have tried many times some existing solutions in this forum . But still there is no way I can get in to flashing on the device . Here are the steps I did in when flashing with tools :
1 . Turning off and unplugging devices battery (I also have tried to flash with battery but failed)
2 . Plug in USB cable to the devices ( but not to the PC )
3 . Installing the USB VCOM driver for MTK MTK6577
4 . Running SP Flash Tool and enter Scatter File
5 . Click the "Download" button on the SP Flash Tools
6 . Plug in the USB cable from the devices to the computer while pressing the volume up button .
7 . Looking into the computer screen flashing process is happening .
Initially there is a process with a red bar marks . Device driver is detected as well ( seen in the device manager ) . When the bar reaches 100 % in the red , the device is detected by the DA USB VCOM port ( COM 28 ) . But immediately displays an error message BROM_ERROR : S_DL_GET_DRAM_SETTING_FAIL ( 5054 ) and the process of flashing the device failed .
I 've tried to uninstall the drivers from USBDeview tools and also through the Device Manager and then install the driver again . But the result remains the same . Port MTK Preloader was never detected . I tried flashing again with a different usb port results also failed . I use the Windows 8 operating system for flashing . I tried with the Windows XP system too but still failed .
Is there a way to revive my device ? . I really - really need your help .
Thank you for the solution that is given . :angel:
That error because flashing wrong preloader and dsp_bl. You can use preloader and dsp_bl from mito A300. I Successfull solve that error and unbrick my Mito T720.
on windows 8 try to disable driver signature verification,and install again your mtk driver
[HELP] Not fully solved
patenpisan said:
That error because flashing wrong preloader and dsp_bl. You can use preloader and dsp_bl from mito A300. I Successfull solve that error and unbrick my Mito T720.
Click to expand...
Click to collapse
Thank's, I Successfull solve that error and unbrick this device. but i have a new problem. Invalid IMEI and no SIM card detected, and Unknown Baseband. Can u help me to fix it again ?,
sonloy777 said:
Thank's, I Successfull solve that error and unbrick this device. but i have a new problem. Invalid IMEI and no SIM card detected, and Unknown Baseband. Can u help me to fix it again ?,
Click to expand...
Click to collapse
You need correct modem.img from same baseband
hi, i've got the same problem on my elephone p2000. how can i fix the invalid IMEI issue? wich file i need? thanks
hardbricked
Devices information :
Product Name : Micromax canvas fun
Hardware : MT6572
Model : a74
Android v : 4.2.2
Baseband v:
Kernel v : 3.4.5
RAM : 512 - ROM: 4GB
I do flashing with SP_Flash_Tool_v3.1224.01 for this device . But never successfully processed . Though I have used the stock rom I had a previous backup of the other similar device . When running on a flashing red bar reaches 100 % , always an error with the message : BROM_ERROR : S_DL_GET_DRAM_SETTING_FAIL ( 5054 ) .
I have tried many times some existing solutions in this forum . But still there is no way I can get in to flashing on the device . Here are the steps I did in when flashing with tools :
1 . Turning off and unplugging devices battery (I also have tried to flash with battery but failed)
2 . Plug in USB cable to the devices ( but not to the PC )
3 . Installing the USB VCOM driver for MTK MTK6572
4 . Running SP Flash Tool and enter Scatter File
5 . Click the "Download" button on the SP Flash Tools
6 . Plug in the USB cable from the devices to the computer while pressing the volume up button .
7 . Looking into the computer screen flashing process is happening .
Initially there is a process with a red bar marks . Device driver is detected as well ( seen in the device manager ) . When the bar reaches 100 % in the red , the device is detected by the DA USB VCOM port ( COM 28 ) . But immediately displays an error message BROM_ERROR : S_DL_GET_DRAM_SETTING_FAIL ( 5054 ) and the process of flashing the device failed .
I 've tried to uninstall the drivers from USBDeview tools and also through the Device Manager and then install the driver again . But the result remains the same . Port MTK Preloader was never detected . I tried flashing again with a different usb port results also failed . I use the Windows 8 operating system for flashing . I tried with the Windows XP system too but still failed .
Is there a way to revive my device ? . I really - really need your help .
error 5054
hi, same problem as in the previous post
my Orange Yomi/ Alcatel ONE TOUCH Pop C1(4015x) (MT6572) is totaly dead, does not respond to any commands. power + vol up / power + vol down / power + vol up + vol down or others, and not enter into recovery mode / fastboot.
I tried to make flash and stoped during surgery and then dead.
I tried many programs but without any result.
sp tools gives me error 5054.
I have a chance to fix it?
ps : the battery is fully charged and is healt
thanks
sorry for my bad english
allviewA4YOU said:
hi, same problem as in the previous post
my Orange Yomi/ Alcatel ONE TOUCH Pop C1(4015x) (MT6572) is totaly dead, does not respond to any commands. power + vol up / power + vol down / power + vol up + vol down or others, and not enter into recovery mode / fastboot.
I tried to make flash and stoped during surgery and then dead.
I tried many programs but without any result.
sp tools gives me error 5054.
I have a chance to fix it?
ps : the battery is fully charged and is healt
thanks
sorry for my bad english
Click to expand...
Click to collapse
Did you solve it? I have the same issue but different device.
Thanks.
allviewA4YOU said:
hi, same problem as in the previous post
my Orange Yomi/ Alcatel ONE TOUCH Pop C1(4015x) (MT6572) is totaly dead, does not respond to any commands. power + vol up / power + vol down / power + vol up + vol down or others, and not enter into recovery mode / fastboot.
I tried to make flash and stoped during surgery and then dead.
I tried many programs but without any result.
sp tools gives me error 5054.
I have a chance to fix it?
ps : the battery is fully charged and is healt
thanks
sorry for my bad english
Click to expand...
Click to collapse
my phone ecoo e04 it's dead
when i flashing itstop 100% red line
and no competet
error 5054
please help me
please i have the same problem with my viwa max . i made a scatter file using mtk droid tools and whiles flashing with sp flash tool. the phone went off. now is not booting but when i connect i see com port at device manager.
any help please?
Help me the problem are the brom error s_dl_get_dram_setting_fail ..
I am getting the EXACT same symptoms. My Golden Warrior A806 does not power on with any button combination and does not power on when charging. SP Flash Tool can recognise the phone when I try to flash to it or format it, but when the red bar reaches 100%, SP Flash Tool waits 11 seconds EVERY TIME, then spits out the error code 5054.
I have also the same problem but in Huwaei Ascend G750 - u10 please help
I am facing the similar issue with my unite 2 a 106. Can anyone please give a detailed process to resolve this issue?
I have the same problem with Zte Blade A1 (c880u)
im having the same problem with Cube T8 Plus...
anyone found a solution yet ?
Another dead cell phone
Alcatel PIXI3 4009E
Same Issue here . . .
Cubot Note S - Flash the Phone with SPFlashTool -> TWRP 3.0.2 (as before at same Device) - Get Dram Setting Failed
Thats mean, the flash don't work/start/end or not? . . . but the Phone ist bricked . . . whats that ???
Same Issue now when I want to "format whole flash without bootloader" . . .
no solution until yet
EDIT:
SP_Flash_Tool w/o battery -> MediaTek USB Port (COM19) -> DA Download red until 100% than stop and error
SP_Flash_Tool with battery -> MediaTek DA USB VCOM (Android) (COM20) -> no DA Download / not recognized
. . . what can I do . . . ?
In my case it ist possible, that the ROM is wrong
masichka05 (forum . cubot . net)
There were phones with another PMT !!!
Now there are 3 types
1.EMMC_PART_USER Size = 0x00000003ae300000(14910MB)
2.EMMC_PART_USER Size = 0x00000003ab400000(15028MB)
3.EMMC_PART_USER Size = 0x00000003ab800000(15032MB)
Where a new firmware for the new layout? Our phones do not work after flash ... ROM
Click to expand...
Click to collapse
How can I check witch "EMMC_PART_USER Size" my device has ?
help pls i bricked my phone after i flashed i wrong rom with sp flash tool well i tried to flash many roms from needrom.com but with no success i get this error BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) or some times an error saying NAND flash was not found or EMMC was not found, when i run memory test it say NAND flash was not detacted the same with EMMC test too , and before my phone was bricked my computer was detecting it as " MTK preloader usb vcom" and now "MTK usb vcom" i think that because i flashed a wrong preloader , any way , i have the same phone is working fine alps GT-I9500 mtk6572 the same modele as the bricked one i buy them from the same place , i did a rom back up for the working with MTKdroid tool tried to flash it and nothing , plz help me dont know what to do
Product Name : Lenovo A660
Hardware : MT6577
I do flashing with SP_Flash_Tool_v3.1224.01 for this device . But never successfully processed . Though I have used the stock rom I had a previous backup of the other similar device . When running on a flashing red bar reaches 100 % , always an error with the message : BROM_ERROR : S_DL_GET_DRAM_SETTING_FAIL ( 5054 ) .
I have tried many times some existing solutions in this forum . But still there is no way I can get in to flashing on the device . Here are the steps I did in when flashing with tools :
1 . Turning off and unplugging devices battery (I also have tried to flash with battery but failed)
2 . Plug in USB cable to the devices ( but not to the PC )
3 . Installing the USB VCOM driver for MTK MTK6577
4 . Running SP Flash Tool and enter Scatter File
5 . Click the "Download" button on the SP Flash Tools
6 . Plug in the USB cable from the devices to the computer while pressing the volume up button .
7 . Looking into the computer screen flashing process is happening .
Initially there is a process with a red bar marks . Device driver is detected as well ( seen in the device manager ) . When the bar reaches 100 % in the red , the device is detected by the DA USB VCOM port ( COM 28 ) . But immediately displays an error message BROM_ERROR : S_DL_GET_DRAM_SETTING_FAIL ( 5054 ) and the process of flashing the device failed .
I can't even boot the phone anymore.
Can someone help me ?
Balafenn said:
Product Name : Lenovo A660
Hardware : MT6577
I do flashing with SP_Flash_Tool_v3.1224.01 for this device . But never successfully processed . Though I have used the stock rom I had a previous backup of the other similar device . When running on a flashing red bar reaches 100 % , always an error with the message : BROM_ERROR : S_DL_GET_DRAM_SETTING_FAIL ( 5054 ) .
I have tried many times some existing solutions in this forum . But still there is no way I can get in to flashing on the device . Here are the steps I did in when flashing with tools :
1 . Turning off and unplugging devices battery (I also have tried to flash with battery but failed)
2 . Plug in USB cable to the devices ( but not to the PC )
3 . Installing the USB VCOM driver for MTK MTK6577
4 . Running SP Flash Tool and enter Scatter File
5 . Click the "Download" button on the SP Flash Tools
6 . Plug in the USB cable from the devices to the computer while pressing the volume up button .
7 . Looking into the computer screen flashing process is happening .
Initially there is a process with a red bar marks . Device driver is detected as well ( seen in the device manager ) . When the bar reaches 100 % in the red , the device is detected by the DA USB VCOM port ( COM 28 ) . But immediately displays an error message BROM_ERROR : S_DL_GET_DRAM_SETTING_FAIL ( 5054 ) and the process of flashing the device failed .
I can't even boot the phone anymore.
Can someone help me ?
Click to expand...
Click to collapse
Its because may be you are flashing a wrong preloader..
Is there any fix to get the preloader back on the device?
Hi Guys,
my redmi note 2 suddenly stopped to work.
no fastboot or TWRP are avilable anymore.
I tried to use SP flash tool SP_Flash_Tool_v5.1628 to flash hermes_global_images_V8.1.2.0.img on my windows 10 machine.
Flashing always stops with: brom error s_ft_enable_dram_fail (4032)
As driver Mediatek USB Port is recognised.
Any other ideas to fix this issue and bring back my phone to life?
Thanks a lot for your strong support!!
MrButcher said:
Hi Guys,
my redmi note 2 suddenly stopped to work.
no fastboot or TWRP are avilable anymore.
I tried to use SP flash tool SP_Flash_Tool_v5.1628 to flash hermes_global_images_V8.1.2.0.img on my windows 10 machine.
Flashing always stops with: brom error s_ft_enable_dram_fail (4032)
As driver Mediatek USB Port is recognised.
Any other ideas to fix this issue and bring back my phone to life?
Thanks a lot for your strong support!!
Click to expand...
Click to collapse
Have you installed mt65xx vcom driver installation? Usually the error code (4032) is problematic with usb driver installation.