Hi Guys,
my redmi note 2 suddenly stopped to work.
no fastboot or TWRP are avilable anymore.
I tried to use SP flash tool SP_Flash_Tool_v5.1628 to flash hermes_global_images_V8.1.2.0.img on my windows 10 machine.
Flashing always stops with: brom error s_ft_enable_dram_fail (4032)
As driver Mediatek USB Port is recognised.
Any other ideas to fix this issue and bring back my phone to life?
Thanks a lot for your strong support!!
MrButcher said:
Hi Guys,
my redmi note 2 suddenly stopped to work.
no fastboot or TWRP are avilable anymore.
I tried to use SP flash tool SP_Flash_Tool_v5.1628 to flash hermes_global_images_V8.1.2.0.img on my windows 10 machine.
Flashing always stops with: brom error s_ft_enable_dram_fail (4032)
As driver Mediatek USB Port is recognised.
Any other ideas to fix this issue and bring back my phone to life?
Thanks a lot for your strong support!!
Click to expand...
Click to collapse
Have you installed mt65xx vcom driver installation? Usually the error code (4032) is problematic with usb driver installation.
Related
help pls i bricked my phone after i flashed i wrong rom with sp flash tool well i tried to flash many roms from needrom.com but with no success i get this error BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) or some times an error saying NAND flash was not found or EMMC was not found, when i run memory test it say NAND flash was not detacted the same with EMMC test too , and before my phone was bricked my computer was detecting it as " MTK preloader usb vcom" and now "MTK usb vcom" i think that because i flashed a wrong preloader , any way , i have the same phone is working fine alps GT-I9500 mtk6572 the same modele as the bricked one i buy them from the same place , i did a rom back up for the working with MTKdroid tool tried to flash it and nothing , plz help me dont know what to do
Hello guys.
I have a problem with my phone. It's an Archos 40 Titanium (neither model c or model b).
I flashed recently the rom of Wiko Sunset which is a KitKat rom. I thought it would be fine as wiko sunset has really similar features to my phone. Before I flashed that rom, I made a backup with SP Flash tool.
The problem now is that I can't flash the backup back. I get always Error 4032: Enable_DRAM_Failed. I've tried different versions of SP Flash Tool and drivers (MTK USB and VCOM drivers). I've followed many "guides" that I found on different websites (eg. to flash the preloader of the stock rom without having the battery in the phone etc), but unfortunatelly I get still the same error.
It's maybe worth mentioning that if I connect the phone without the battery and by pusshing VOL+ and power buttons then it connects but after 4-5 seconds it disconnects. If I do the same with the battery on, then it doesn't disconnect.
I am running Windows 7 x64 and Linux through dual boot.
I would be greatful if you guys could help me.
If you need any more info, you can ask me.
Thank you in advance.
Update:
I solved it by myself. After some tries it "accepted" the format I was trying to do (with SP Flash Tool) . Now I am flashing back my backup..
how to
first download the right firmware for this phone
then open sp flash tool and open the scarter from firmware if the firmware is corect all the directions is on screen of sp flash tool.
now click the download buton
after 2 sec remove the batery from your phone and conect the usb cable
windows update find automatic the right drivers mtk 65xx preloader vcom and after 5 sec the drivers is ok.
sp tool now flashing the firmware and the yelow bar work .
when you see the check on green square ,work is finished.
now you can unplung the usb cable and open your device.
What if i ddnt get the stock rom...
My bootloader is gone..
And phone is dead..
Really in financial problem
ELUGA S STOCK ROM...
google drive links are showing
404 error
You can find the right rom for your device on needrom site and flash it again. Check the choice of download+format
Ok.
Hi..
I Have a problem with my Acer Liquid E2 Dual Sim..
Before this, my problem is the phone was stuck in the Ace green logo (Bootloop) and i tried to flash it using SP flash tool, and it flashed succesful until the green circle, but my device gotten even worse, now when i turn on the power, it just vibrate once and continue in blank screen only..and when i try to connect it to the pc, it recognize with a vibrate and blue led turning on, but in the device manager, it detects as MTK USB Port, the is no MTK Preloader or any driver except the mtk usb port
I already googled it, and it seems because i flashed the wrong preloader (it means i used the wrong firmware in the spflashtool), but i downloaded it from the global acer download, And another information i get that my device is in a condition where it enters the low-layer download interface of the MT65xx device (AFAIK).. Thats why it only detects as MTK USB Port. So what to do now? I have tried using SPFlashTool to Dwonload only the preloader checked using from two different rom, but no success both? already tried any different version spflashtool
Every time i tried to download the preloader to the device using spflashtool it just shows "dram failed"
like this
"BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM Failed!"
Does anyone knows how to fix it
Anyboy can help me pleaasee
lukerodriguez said:
Anyboy can help me pleaasee
Click to expand...
Click to collapse
i have same problem bro, is your phone already fix?
Hi,
I have infinix hot note pro [mt6592] 2 GB ram+16 GB rom version. I somehow bricked it while I was flashing custom recovery. Now my device isn't turning on but it is connected with my PC as usb preloader but it is not dectected by SP flash tool so that i can flash stock rom. USB DA drivers are not being installed, when i install them then error comes that this device cannot start. And my mobile isn't detected by pc as any other mediatek usb device, it is just connected as USB preloader vcom device. Please help me. I'll be very thankful. Please :crying:
Aoa.Check your inbox.
So whenever i try to connect my nord 2 in BROM mode , it keeps on rebooting and i cant keep it on forever in BROM mode due to which i am not able to flash anything .
Can anyone help me with this please ?
rohit4989 said:
So whenever i try to connect my nord 2 in BROM mode , it keeps on rebooting and i cant keep it on forever in BROM mode due to which i am not able to flash anything .
Can anyone help me with this please ?
Click to expand...
Click to collapse
Uninstall all drivers from device manager, avoid usb 3.0 port and reinstall appropriate drivers