help pls i bricked my phone after i flashed i wrong rom with sp flash tool well i tried to flash many roms from needrom.com but with no success i get this error BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) or some times an error saying NAND flash was not found or EMMC was not found, when i run memory test it say NAND flash was not detacted the same with EMMC test too , and before my phone was bricked my computer was detecting it as " MTK preloader usb vcom" and now "MTK usb vcom" i think that because i flashed a wrong preloader , any way , i have the same phone is working fine alps GT-I9500 mtk6572 the same modele as the bricked one i buy them from the same place , i did a rom back up for the working with MTKdroid tool tried to flash it and nothing , plz help me dont know what to do
Related
plz help
My phone is dead after I flash a wrong preloader
my phone model is iNEW M1
I try with ALL ROM on needrom.com with keyworld /
iNEW M1 Mobile Phone " "mtk6589" ... about 20 ROM but I get Enable DRAM FAILED for each try
Use case :
1- Disconnet the battery and wait 10 seconds
2- Open flash tools with the scatter file
3- Connect the phone usb cable to pc
4- Plug the batterie on the phone
==> MTK USB PORT (COM XX) ok : drivers on the pc seems to be ok
5- On flash tools press download
every time I get BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM fail
on the web they say the cause is the wrong ROM but I don't know (I try over than 20 ROM)
plz help me sorry about my english
hey guys
after flashing wrong preloader my phone do not boot, do not charge and do not show any sign.... I have a back up but I can't flash it again... sp tool do not detect it...
how can I get into meta mode for my phone??
and what should I do to fix it?
jamegreat said:
hey guys
after flashing wrong preloader my phone do not boot, do not charge and do not show any sign.... I have a back up but I can't flash it again... sp tool do not detect it...
how can I get into meta mode for my phone??
and what should I do to fix it?
Click to expand...
Click to collapse
Just flash stock firmware with Sp-flashtools Download
1- Install mt65xx adb drivers
2- Connect your device to your pc
3- Load scatter file and click download in sp-flashtools
4- Remove battery then insert it again
Wait until it's done and turn in your phone (the first boot will be slow 2-5 min)
preloader
hi
i have same phone . lenovo a319 d ram fail error . please share ur backup or preloader with me:crying. please:crying:
Same here. I flashed with that ROM what was in 2 comments before, and now my phone is dead. Every time I've got this BROM error.
Hi..
I Have a problem with my Acer Liquid E2 Dual Sim..
Before this, my problem is the phone was stuck in the Ace green logo (Bootloop) and i tried to flash it using SP flash tool, and it flashed succesful until the green circle, but my device gotten even worse, now when i turn on the power, it just vibrate once and continue in blank screen only..and when i try to connect it to the pc, it recognize with a vibrate and blue led turning on, but in the device manager, it detects as MTK USB Port, the is no MTK Preloader or any driver except the mtk usb port
I already googled it, and it seems because i flashed the wrong preloader (it means i used the wrong firmware in the spflashtool), but i downloaded it from the global acer download, And another information i get that my device is in a condition where it enters the low-layer download interface of the MT65xx device (AFAIK).. Thats why it only detects as MTK USB Port. So what to do now? I have tried using SPFlashTool to Dwonload only the preloader checked using from two different rom, but no success both? already tried any different version spflashtool
Every time i tried to download the preloader to the device using spflashtool it just shows "dram failed"
like this
"BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM Failed!"
Does anyone knows how to fix it
Anyboy can help me pleaasee
lukerodriguez said:
Anyboy can help me pleaasee
Click to expand...
Click to collapse
i have same problem bro, is your phone already fix?
hello i just get a dg2014 used a good price..
i try to flash the patch for 1% battery issue, but i format the phone with sp flashtool and now i only get mtk usb port, not preloader..sp flashtool get red bar at 100% and nothing more..how can i flash the preloader or flash the phone without preloader, please i need help..i read the guide for mtk dfevices unbricking but no answer for this..
is any way or tool to flash the preloader..i mean the doogee manufacturer flash the preloader this way, so it has to have a solution, hep me please
Hi Guys,
my redmi note 2 suddenly stopped to work.
no fastboot or TWRP are avilable anymore.
I tried to use SP flash tool SP_Flash_Tool_v5.1628 to flash hermes_global_images_V8.1.2.0.img on my windows 10 machine.
Flashing always stops with: brom error s_ft_enable_dram_fail (4032)
As driver Mediatek USB Port is recognised.
Any other ideas to fix this issue and bring back my phone to life?
Thanks a lot for your strong support!!
MrButcher said:
Hi Guys,
my redmi note 2 suddenly stopped to work.
no fastboot or TWRP are avilable anymore.
I tried to use SP flash tool SP_Flash_Tool_v5.1628 to flash hermes_global_images_V8.1.2.0.img on my windows 10 machine.
Flashing always stops with: brom error s_ft_enable_dram_fail (4032)
As driver Mediatek USB Port is recognised.
Any other ideas to fix this issue and bring back my phone to life?
Thanks a lot for your strong support!!
Click to expand...
Click to collapse
Have you installed mt65xx vcom driver installation? Usually the error code (4032) is problematic with usb driver installation.